def setTipo(l,w): 'arg1=length,arg2=width' import FreeCAD fpTipo=FreeCAD.activeDocument().tipo fpTipo.length=l fpTipo.width=w FreeCAD.activeDocument().recompute()
def getAnnotations():
if not FreeCAD.activeDocument():
return False
#
doc = FreeCAD.activeDocument()
data = []
for j in doc.Objects:
if hasattr(j, "Proxy") and hasattr(j.Proxy, "Type") and 'PCBannotation' in j.Proxy.Type:
try:
annotation = ''
for i in j.ViewObject.Text:
annotation += u'{0}\n'.format(i)
data.append([
j.X.Value, j.Y.Value,
j.ViewObject.Size.Value,
j.Side,
annotation.strip(),
j.ViewObject.Align,
j.Rot.Value,
j.ViewObject.Mirror,
j.ViewObject.Spin
])
except Exception, e:
FreeCAD.Console.PrintWarning(str(e) + "\n")
def __init__(self, l = 10):
"""Create a frame. l is the vector's length"""
#-- Store the vector length
self.l = l
#-- Create the Freecad Object
self.obj = FreeCAD.ActiveDocument.addObject("Part::Compound","Frame")
#-- Build the frame
self.x_axis = svector(1, 0, 0, l = l).color("red")
self.x_axis.label = "X axis"
self.y_axis = svector(0, 1, 0, l = l).color("green")
self.y_axis.label = "Y axis"
self.z_axis = svector(0, 0, 1, l = l).color("blue")
self.z_axis.label = "Z axis"
self.origin = sphere(r = 0.5)
self.origin.label = "Origin"
#-- Creat the compound object
self.obj.Links = [self.x_axis.obj, self.y_axis.obj, self.z_axis.obj,
self.origin.obj]
#-- Default display mode
self.obj.ViewObject.DisplayMode = 'Shaded'
FreeCAD.activeDocument().recompute()
return
def spreadSheet(self, roll, gz, draft, trim):
""" Create a Spreadsheet with the results
Position arguments:
roll -- List of roll angles (in degrees).
gz -- List of GZ values (in meters).
draft -- List of equilibrium drafts (in meters).
trim -- List of equilibrium trim angles (in degrees).
"""
s = FreeCAD.activeDocument().addObject('Spreadsheet::Sheet',
'GZ')
# Print the header
s.set("A1", "roll [deg]")
s.set("B1", "GZ [m]")
s.set("C1", "draft [m]")
s.set("D1", "trim [deg]")
# Print the data
for i in range(len(roll)):
s.set("A{}".format(i + 2), str(roll[i]))
s.set("B{}".format(i + 2), str(gz[i]))
s.set("C{}".format(i + 2), str(draft[i]))
s.set("D{}".format(i + 2), str(trim[i]))
# Recompute
FreeCAD.activeDocument().recompute()
def proceed():
QtGui.qApp.setOverrideCursor(QtCore.Qt.WaitCursor)
FreeCAD.Console.PrintMessage("===========================================\n")
FreeCAD.Console.PrintMessage("unfoldBox: start.\n")
try:
file_name = fields_l[0].text()
scale = float(fields_l[1].text())
scale_auto = scale_check.isChecked()
a3 = a3_check.isChecked()
cartridge = cartridge_check.isChecked()
onedrawing = onedrawing_check.isChecked()
sewed = sewed_check.isChecked()
FreeCAD.Console.PrintMessage("unfoldBox.file_name: "+file_name+"\n")
FreeCAD.Console.PrintMessage("unfoldBox.scale: "+str(scale)+"\n")
FreeCAD.Console.PrintMessage("unfoldBox.scale_check: "+str(scale_auto)+"\n")
FreeCAD.Console.PrintMessage("unfoldBox.a3_check: "+str(a3)+"\n")
FreeCAD.Console.PrintMessage("unfoldBox.cartridge: "+str(cartridge)+"\n")
FreeCAD.Console.PrintMessage("unfoldBox.onedrawing: "+str(onedrawing)+"\n")
FreeCAD.Console.PrintMessage("unfoldBox.sewed: "+str(sewed)+"\n")
except:
msg="unfoldBox: wrong inputs...\n"
FreeCAD.Console.PrintError(msg)
errorDialog(msg)
QtGui.qApp.restoreOverrideCursor()
DialogBox.hide()
#
# Get selection
#
sel=FreeCADGui.Selection.getSelection()
faceid=0
objnames_l=[]
tree_l=[]
grp=FreeCAD.activeDocument().addObject("App::DocumentObjectGroup", str(file_name))
for objid in range( sel.__len__() ):
obj=Draft.clone(sel[objid])
grp.addObject(obj)
objnames_l.append( [ obj , sel[objid].Name ] )
unfold=unfoldBox()
if sewed :
objnames_l=unfold.done(objnames_l)
grp.addObject(objnames_l[0][0])
else:
for objid in range( objnames_l.__len__() ):
unfold.moveXY(objnames_l[objid][0])
id=0
while objnames_l.__len__() > 0:
draw=Drawing2d( scale, scale_auto , a3 , cartridge , onedrawing , FreeCAD.activeDocument().Name , "Page"+str(id) )
objnames_l=draw.all( objnames_l )
id=id+1
FreeCAD.Console.PrintMessage("unfoldBox: obj_l= "+str(objnames_l.__len__())+"\n")
FreeCAD.Console.PrintMessage("unfoldBox: end.\n")
FreeCAD.Console.PrintMessage("===========================================\n")
def addSelection(self,doc,obj,sub,pnt):
subObject=FreeCAD.getDocument(doc).getObject(obj).Shape.getElement(sub)
if subObject.ShapeType=="Face":
if self.faceBase==None:
self.faceBase=subObject
FreeCAD.Console.PrintMessage('Target face selected.\n')
else:
FreeCAD.activeDocument().openTransaction('alignFlange')
frameCmd.rotTheBeam(FreeCAD.getDocument(doc).getObject(obj),self.faceBase,subObject)
FreeCAD.activeDocument().commitTransaction()
def importAssembly(FileName,DestItem):
for i in Part.read(FileName).Solids:
po = FreeCAD.activeDocument().addObject('Assembly::ItemPart','STP-Part')
DestItem.Items = DestItem.Items + [po]
bo = FreeCAD.activeDocument().addObject('PartDesign::Body','STP-Body')
po.Model = bo
so = FreeCAD.activeDocument().addObject('PartDesign::Solid','STP-Solid')
bo.Model = so
bo.Tip = so
so.Shape = i
def hide_meshes_show_parts_constraints(self):
if FreeCAD.GuiUp:
for acnstrmesh in FreeCAD.activeDocument().Objects:
if "Constraint" in acnstrmesh.TypeId:
acnstrmesh.ViewObject.Visibility = True
if "Mesh" in acnstrmesh.TypeId:
aparttoshow = acnstrmesh.Name.replace("_Mesh","")
for apart in FreeCAD.activeDocument().Objects:
if aparttoshow == apart.Name:
apart.ViewObject.Visibility = True
acnstrmesh.ViewObject.Visibility = False #OvG: Hide meshes and show constraints and meshed part e.g. on purging results
def hide_parts_constraints_show_meshes(self):
if FreeCAD.GuiUp:
for acnstrmesh in FreeCAD.activeDocument().Objects:
#if "Constraint" in acnstrmesh.TypeId:
# acnstrmesh.ViewObject.Visibility = False
if "Mesh" in acnstrmesh.TypeId:
aparttoshow = acnstrmesh.Name.replace("_Mesh","")
for apart in FreeCAD.activeDocument().Objects:
if aparttoshow == apart.Name:
apart.ViewObject.Visibility = False
acnstrmesh.ViewObject.Visibility = True #OvG: Hide constraints and parts and show meshes
def fastExplodeModels(self):
if FreeCAD.activeDocument():
doc = FreeCAD.activeDocument()
if len(doc.Objects):
a = doc.addObject("App::FeaturePython", 'Explode')
obj = explodeObject(a)
viewProviderExplodeObject(a.ViewObject)
for elem in doc.Objects:
if hasattr(elem, "Proxy") and hasattr(elem, "Type") and elem.Proxy.Type == "PCBpart":
if elem.Side == "TOP":
obj.spisObiektowGora[elem.Name] = [doc.getObject(elem.Name).Placement.Base.z, 3]
else:
obj.spisObiektowDol[elem.Name] = [doc.getObject(elem.Name).Placement.Base.z, 3]
#elif hasattr(elem, "Proxy") and hasattr(elem, "Type") and elem.Proxy.Type == 'partsGroup': # objects
#for i in elem.OutList:
#if hasattr(i, "Proxy") and hasattr(i, "Type") and i.Proxy.Type == "PCBpart":
#if i.Side == "TOP":
#obj.spisObiektowGora[i.Name] = [doc.getObject(i.Name).Placement.Base.z, 3]
#else:
#obj.spisObiektowDol[i.Name] = [doc.getObject(i.Name).Placement.Base.z, 3]
##if float("%4.2f" % i.Placement.Rotation.Axis.x) > 0.: # bottom side -> nie zawsze rozpoznaje poprawnie
##obj.spisObiektowDol[i.Name] = [doc.getObject(i.Name).Placement.Base.z, 3]
##else: # top side
##obj.spisObiektowGora[i.Name] = [doc.getObject(i.Name).Placement.Base.z, 3]
elif hasattr(elem, "Proxy") and hasattr(elem, "Type") and elem.Proxy.Type == 'layersGroup': # layers
for i in elem.OutList:
if hasattr(i, "Proxy") and hasattr(i, "Type") and ('tSilk' in i.Proxy.Type or 'tDocu' in i.Proxy.Type):
obj.spisObiektowGora[i.Name] = [doc.getObject(i.Name).Placement.Base.z, 1]
elif hasattr(i, "Proxy") and hasattr(i, "Type") and 'tPad' in i.Proxy.Type:
obj.spisObiektowGora[i.Name] = [doc.getObject(i.Name).Placement.Base.z, 2]
elif hasattr(i, "Proxy") and hasattr(i, "Type") and 'tPath' in i.Proxy.Type:
obj.spisObiektowGora[i.Name] = [doc.getObject(i.Name).Placement.Base.z, 2]
#elif hasattr(i, "Proxy") and hasattr(i, "Type") and 'tKeepout' in i.Proxy.Type:
#obj.spisObiektowGora[i.Name] = [doc.getObject(i.Name).Placement.Base.z, 4]
elif hasattr(i, "Proxy") and hasattr(i, "Type") and 'tcenterDrill' in i.Proxy.Type:
obj.spisObiektowGora[i.Name] = [doc.getObject(i.Name).Placement.Base.z, 2]
elif hasattr(i, "Proxy") and hasattr(i, "Type") and ('bSilk' in i.Proxy.Type or 'bDocu' in i.Proxy.Type):
obj.spisObiektowDol[i.Name] = [doc.getObject(i.Name).Placement.Base.z, 1]
elif hasattr(i, "Proxy") and hasattr(i, "Type") and 'bPad' in i.Proxy.Type:
obj.spisObiektowDol[i.Name] = [doc.getObject(i.Name).Placement.Base.z, 2]
elif hasattr(i, "Proxy") and hasattr(i, "Type") and 'bPath' in i.Proxy.Type:
obj.spisObiektowDol[i.Name] = [doc.getObject(i.Name).Placement.Base.z, 2]
#elif hasattr(i, "Proxy") and hasattr(i, "Type") and 'bKeepout' in i.Proxy.Type:
#obj.spisObiektowDol[i.Name] = [doc.getObject(i.Name).Placement.Base.z, 4]
elif hasattr(i, "Proxy") and hasattr(i, "Type") and 'bcenterDrill' in i.Proxy.Type:
obj.spisObiektowDol[i.Name] = [doc.getObject(i.Name).Placement.Base.z, 2]
obj.setParam(a, 'Inverse', False)
obj.setParam(a, 'Active', True)
obj.setParam(a, 'TopStepSize', 10)
obj.setParam(a, 'BottomStepSize', 10)
obj.generuj(a)
def disegna(sk, pos):
'arg1=sketch, arg2=pos (list of 3-uple): draws the segments of "pos" in "sketch" and close the polygon'
import FreeCAD, Part, Sketcher
lines=[]
while len(pos)>1:
lines.append(sk.addGeometry(Part.Line(FreeCAD.Vector(pos[0]),FreeCAD.Vector(pos[1]))))
pos.pop(0)
for i in range(len(lines)-1):
sk.addConstraint(Sketcher.Constraint('Coincident',lines[i],2,lines[i+1],1))
sk.addConstraint(Sketcher.Constraint('Coincident',lines[len(lines)-1],2,lines[0],1))
FreeCAD.activeDocument().recompute()
return lines
def __init__(self, r, angle1 = -90):
"""Create a primitive sphere of given r radius"""
#-- Create the Freecad Object
self.obj = FreeCAD.ActiveDocument.addObject("Part::Sphere","Sphere","Sphere")
#-- Asign the attrributes
self.r = r
self.angle1 = angle1
FreeCAD.activeDocument().recompute()
return
def addSelection(self,doc,obj,sub,pnt):
Obj=FreeCAD.getDocument(doc).getObject(obj)
if self.beam==None and Obj.TypeId=='Part::FeaturePython' and hasattr(Obj,'Height'):
self.beam=Obj
FreeCAD.Console.PrintMessage('Beam type selected.\n')
from PySide.QtGui import QInputDialog as qid
dist=float(qid.getText(None,"stretch a beam","old length = "+str(self.beam.Height)+"\nnew length?")[0])
frameCmd.stretchTheBeam(self.beam,dist)
FreeCAD.activeDocument().recompute()
self.av.removeEventCallback("SoKeyboardEvent",self.stop)
FreeCADGui.Selection.removeObserver(self)
FreeCAD.Console.PrintMessage("I quit.")
def accept(self, ang=None):
if not ang:
ang=float(self.form.edit1.text())
self.deleteArrow()
objects=FreeCADGui.Selection.getSelection()
if objects and self.Axis:
FreeCAD.ActiveDocument.openTransaction('rotateTheBeamAround')
for o in objects:
if self.form.copyCB.isChecked():
FreeCAD.activeDocument().copyObject(o,True)
frameCmd.rotateTheBeamAround(o,self.Axis,ang)
FreeCAD.ActiveDocument.commitTransaction()
def addSelection(self,doc,obj,sub,pnt):
subObject=FreeCAD.getDocument(doc).getObject(obj).Shape.getElement(sub)
if subObject.ShapeType=="Face":
if self.targetFace==None:
self.targetFace=subObject
FreeCAD.Console.PrintMessage('Target face selected.\n')
else:
beam=FreeCAD.getDocument(doc).getObject(obj)
FreeCAD.activeDocument().openTransaction('levelTheBeam')
frameCmd.levelTheBeam(beam,[self.targetFace,subObject])
FreeCAD.activeDocument().commitTransaction()
FreeCAD.Console.PrintMessage('Face moved.\n')
FreeCAD.Console.PrintWarning('Select another face or press [ESC].\n')
def copy(self): """Return a copy of the object""" #-- Create a new union lc = [child.copy() for child in self.childs] u = union(lc) #-- Copy the placement u.obj.Placement = self.obj.Placement FreeCAD.activeDocument().recompute() return u
def insert(self): # insert the section
result=FreeCAD.ActiveDocument.findObjects("App::DocumentObjectGroup","Profiles_set")
if result:
group= result[0]
else:
group=FreeCAD.activeDocument().addObject("App::DocumentObjectGroup","Profiles_set")
if self.sizeList.selectedItems():
prop=self.sectDictList[self.sizeList.currentRow()]
if prop['stype']=='C':
s=makeCircle(float(prop['H']))
else:
s=ArchProfile.makeProfile([0,'SECTION',prop['SSize']+'-000',prop['stype'],float(prop['W']),float(prop['H']),float(prop['ta']),float(prop['tf'])])
group.addObject(s)
FreeCAD.activeDocument().recompute()
def addSelection(self,doc,obj,sub,pnt):
selex=FreeCADGui.Selection.getSelectionEx()
if self.beam==None and hasattr(selex[len(selex)-1].Object,'Height'):
self.beam=selex[len(selex)-1].Object
FreeCAD.Console.PrintMessage('Beam selected\n')
elif self.edge==None and selex[len(selex)-1].SubObjects[0].ShapeType=='Edge':
self.edge=selex[len(selex)-1].SubObjects[0]
FreeCAD.Console.PrintMessage('Edge selected\n')
if self.edge!=None and self.beam!=None:
frameCmd.placeTheBeam(self.beam,self.edge)
FreeCAD.Console.PrintMessage('Beam placed.\n')
FreeCAD.Console.PrintWarning('Select another beam and another edge.\n[ESC] to exit.\n')
self.beam=self.edge=None
FreeCAD.activeDocument().recompute()
def addSelection(self,doc,obj,sub,pnt):
subObject=FreeCAD.getDocument(doc).getObject(obj).Shape.getElement(sub)
if subObject.ShapeType=="Edge":
self.edges.append(subObject)
FreeCAD.Console.PrintMessage("Edge"+str(len(self.edges))+" OK\n")
if len(self.edges)>1:
sel=FreeCADGui.Selection.getSelection()
beam=sel[len(sel)-1]
FreeCAD.activeDocument().openTransaction('joinTheBeamsEdges')
frameCmd.joinTheBeamsEdges(beam,self.edges[0],self.edges[1])
FreeCAD.activeDocument().commitTransaction()
FreeCAD.Console.PrintMessage('Done.\n')
self.edges=[]
FreeCAD.Console.PrintWarning('Select other edges or [ESC] to exit\n')
def step(self,now):
say("Kardan step!" + str(now))
FreeCAD.R=self
if now<self.obj2.start or now>=self.obj2.end:
say("ausserhalb")
pass
else:
if not self.obj2.obj:
errorDialog("kein Sketch zugeordnet")
raise Exception(' self.obj2.obj nicht definiert')
# alpha=60
alpha=self.obj2.angleZenit
phi=1
# testfall
phi=10
# achse 1
fa1=self.obj2.objAxis1
p0=fa1.Placement
phi0=p0.Rotation.Angle/pi*180
# say("phi0 Basis " + str(phi0))
p1=FreeCAD.Placement(App.Vector(0,0,0),App.Rotation(App.Vector(0,0,1),phi))
r1=p1.multiply(p0)
fa1.Placement=r1
phi20=arctan(tan(phi0*pi/180)*cos(alpha*pi/180))*180/pi
phi21=arctan(tan((phi0+phi)*pi/180)*cos(alpha*pi/180))*180/pi
say("phi20 "+str(phi20))
say("phi21 "+str(phi21))
# achse 2
timepos=now-self.obj2.start
if 90/phi-1<=timepos and timepos<270/phi-1:
phi21=180+phi21
say("*************** ! phi21 ="+str(phi21) + " now:" + str(now))
fa2=self.obj2.objAxis2
p1=FreeCAD.Placement(App.Vector(0,0,0),App.Rotation(App.Vector(0,0,1),phi21))
p2=FreeCAD.Placement(App.Vector(0,0,0),App.Rotation(App.Vector(0,1,0),alpha))
r3=p2.multiply(p1)
fa2.Placement=r3
# kreuz
f=self.obj2.objCross
rotcross(f,alpha,phi0+phi)
FreeCAD.activeDocument().recompute()
def spreadSheet(self, ship, trim):
""" Write data file.
@param ship Selected ship instance
@param trim Trim in degrees.
@return True if error happens.
"""
s = FreeCAD.activeDocument().addObject('Spreadsheet::Sheet',
'Hydrostatics')
# Print the header
s.set("A1", "displacement [ton]")
s.set("B1", "draft [m]")
s.set("C1", "wetted surface [m^2]")
s.set("D1", "1cm trimming ship moment [ton*m]")
s.set("E1", "Floating area [m^2]")
s.set("F1", "KBl [m]")
s.set("G1", "KBt [m]")
s.set("H1", "BMt [m]")
s.set("I1", "Cb")
s.set("J1", "Cf")
s.set("K1", "Cm")
# Print the data
for i in range(len(self.points)):
point = self.points[i]
s.set("A{}".format(i + 2),
str(point.disp.getValueAs("kg").Value / 1000.0))
s.set("B{}".format(i + 2),
str(point.draft.getValueAs("m").Value))
s.set("C{}".format(i + 2),
str(point.wet.getValueAs("m^2").Value))
s.set("D{}".format(i + 2),
str(point.mom.getValueAs("kg*m").Value / 1000.0))
s.set("E{}".format(i + 2),
str(point.farea.getValueAs("m^2").Value))
s.set("F{}".format(i + 2),
str(point.xcb.getValueAs("m").Value))
s.set("G{}".format(i + 2),
str(point.KBt.getValueAs("m").Value))
s.set("H{}".format(i + 2),
str(point.BMt.getValueAs("m").Value))
s.set("I{}".format(i + 2),
str(point.Cb))
s.set("J{}".format(i + 2),
str(point.Cf))
s.set("K{}".format(i + 2),
str(point.Cm))
# Recompute
FreeCAD.activeDocument().recompute()
def __init__(self, items):
"""items = list of parts to perform union"""
#-- Create the Freecad Object
self.obj = FreeCAD.activeDocument().addObject("Part::MultiFuse","Union")
#-- Save the list of parts
self.childs = items
#-- Do the union!
l = [item.obj for item in self.childs]
self.obj.Shapes = l
FreeCAD.activeDocument().recompute()
def onChanged(self,obj,prop):
say("** onChanged ")
if hasattr(FreeCAD,"animationLock"):
if FreeCAD.animationLock:
return
FreeCAD.animationLock=True
say("------------------------------***Lock EIN")
# say(obj)
say(obj.Label + " " + prop)
FreeCAD.mytoc=[self,obj,prop]
oldval=FreeCAD.animation['changed'][2]
val=obj.getPropertyByName(prop)
say("old:" + str(oldval) + " new:" + str(val))
# g=FreeCAD.getDocument("getriebe").getObject("My_Gearing")
g=obj
sys=g.obj
s=sys.Links[0]
pm=sys.Links[1]
p=pm.Links[0]
m=pm.Links[1]
# lage planet-stern
if prop=='distStarPlanet':
pm.Placement.Base.x=obj.distStarPlanet
# age moond stren
if prop=='distPlanetMoon':
m.Placement.Base.x=obj.distPlanetMoon
if prop=='end':
obj.end=obj.start+obj.duration
say("begonnen")
if prop=='objMoon':
m.Links=[obj.objMoon]
if prop=='objStar':
s.Links=[obj.objStar]
if prop=='objPlanet':
p.Links=[obj.objPlanet]
FreeCAD.animationLock=False
FreeCAD.activeDocument().recompute()
say("******************************Lock aus")
say("fertig")
def generate_unit_cell(self):
'''Generates a complete unit cell from single mesh wires.'''
try:
mesh_lattice_const = float(self.sb_mesh_lattice_const.text())*1e-3
wire_diameter = float(self.sb_wire_diameter.text())*1e-3
space_above_mesh = float(self.sb_space_above_mesh.text())*1e-3
space_below_mesh = float(self.sb_space_below_mesh.text())*1e-3
safety_distance = float(self.sb_safety_distance.text())*1e-3 # to prevent overlap of wires, which can cause trouble in later union or common operations and some other glitches
except:
FreeCAD.Console.PrintError("Error in evaluating the parameters")
wires = {}
for direction in ["x", "y"]:
wires[direction] = []
for wire_num in range(5): # draw 4 wires in each direction
wire = self.generate_wire(wire_diameter, mesh_lattice_const, safety_distance=safety_distance)
# position wire
if direction == "x":
wire.Placement.Base += FreeCAD.Vector(0, wire_num*mesh_lattice_const, 0)
if wire_num%2:
wire.Placement.Rotation = FreeCAD.Rotation(FreeCAD.Vector(1,0,0), 180)
else:
wire.Placement.Base += FreeCAD.Vector(0, 0, 2*safety_distance)
else:
wire.Placement.Rotation = FreeCAD.Rotation(FreeCAD.Vector(0,0,1), 90)
wire.Placement.Base += FreeCAD.Vector(wire_num*mesh_lattice_const, 0, 0)
if not wire_num%2:
wire.Placement.Rotation = wire.Placement.Rotation.multiply(FreeCAD.Rotation(FreeCAD.Vector(1,0,0), 180))
else:
wire.Placement.Base += FreeCAD.Vector(0, 0, 2*safety_distance)
wires[direction].append(wire)
mesh = FreeCAD.activeDocument().addObject("Part::MultiFuse","Mesh")
mesh.Shapes = wires["x"] + wires["y"]
mesh.Placement.Base = FreeCAD.Vector(-2.*mesh_lattice_const, -2.*mesh_lattice_const, 0) # translate mesh to origin
gas_box = FreeCAD.activeDocument().addObject("Part::Box","Gas")
gas_box.Length = mesh_lattice_const*2.
gas_box.Width = mesh_lattice_const*2.
gas_box.Height = space_above_mesh + space_below_mesh + wire_diameter*2.
gas_box.Placement.Base = FreeCAD.Vector(-mesh_lattice_const, -mesh_lattice_const, -space_below_mesh-wire_diameter)
unit_cell = FreeCAD.activeDocument().addObject("Part::Cut", "Unit Cell")
unit_cell.Base = gas_box
unit_cell.Tool = mesh
mesh.touch() # to force recomputation
FreeCAD.ActiveDocument.recompute()
def copyTools(self):
tools = []
model = self.form.ToolsList.model()
for i in range(model.rowCount()):
item = model.item(i, 0)
if item.checkState():
item = model.index(i, 1)
tools.append(item.data())
if len(tools) == 0:
return
targets = self.TLM.getLists()
currList = "<Main>"
for target in targets:
if target == currList:
targets.remove(target)
if len(targets) == 0:
FreeCAD.Console.PrintWarning("no place to go")
return
elif len(targets) == 1:
targetlist = targets[0]
else:
form = FreeCADGui.PySideUic.loadUi(":/panels/DlgToolCopy.ui")
form.cboTarget.addItems(targets)
r = form.exec_()
if r is False:
return None
else:
targetlist = form.cboTarget.currentText()
for toolnum in tools:
tool = self.TLM.getTool(currList, int(toolnum))
PathLog.debug('tool: {}, toolnum: {}'.format(tool, toolnum))
for i in FreeCAD.ActiveDocument.findObjects("Path::Feature"):
if isinstance(i.Proxy, PathScripts.PathJob.ObjectPathJob) and i.Label == targetlist:
label = "T{}: {}".format(toolnum, tool.Name)
obj = FreeCAD.ActiveDocument.addObject("Path::FeaturePython",label)
PathScripts.PathLoadTool.LoadTool(obj)
PathScripts.PathLoadTool._ViewProviderLoadTool(obj.ViewObject)
PathUtils.addToJob(obj, targetlist)
FreeCAD.activeDocument().recompute()
newtool = tool.copy()
obj.Tooltable.setTool(int(toolnum), newtool)
obj.ToolNumber = int(toolnum)
#obj.recompute()
FreeCAD.ActiveDocument.recompute()
def fusion(self,objnames_l):
#
# Init
#
obj_l=[]
objna_l=[]
obj0=objnames_l[0][0];name=objnames_l[0][1]
objfuse=FreeCAD.activeDocument().addObject("Part::MultiFuse","Unfolding")
for k in range( objnames_l.__len__() ):
objk=objnames_l[k][0]
obj_l.append(objk)
objfuse.Shapes=obj_l
FreeCAD.activeDocument().recompute()
objna_l.append([objfuse,name])
return objna_l
def step(self,now):
say("Gearing step!" + str(now))
FreeCAD.R=self
self.ignore=True
if now<self.obj2.start or now>self.obj2.end:
sayd("ausserhalb")
pass
else:
if not self.obj2.obj:
errorDialog("kein Sketch zugeordnet")
raise Exception(' self.obj2.obj nicht definiert')
sys=self.obj2.obj
s=sys.Links[0]
pm=sys.Links[1]
p=pm.Links[0]
m=pm.Links[1]
#say("sonne "+ s.Label)
#say("planet "+ p.Label)
#say("moinde" + m.Label)
if now==self.obj2.start:
s.Placement.Rotation.Axis=FreeCAD.Vector(0,0,1)
p.Placement.Rotation.Axis=FreeCAD.Vector(0,0,1)
m.Placement.Rotation.Axis=FreeCAD.Vector(0,0,1)
# Eigenachsen Rotationen
print(s.Placement.Rotation.Angle)
an=s.Placement.Rotation.Angle
ax=s.Placement.Rotation.Axis
day_star=self.obj2.dayStar
day_planet=self.obj2.dayPlanet
day_moon=self.obj2.dayMoon
rotstep(s,day_star)
rotstep(p,day_planet)
rotstep(m,day_moon)
#p.Placement.Rotation.Angle += math.pi * 2/day_planet
#m.Placement.Rotation.Angle += math.pi * 2/day_moon
# Schenkel Rotationen
sys.Placement.Rotation.Angle += 0
pm.Placement.Rotation.Angle += 0
FreeCAD.activeDocument().recompute()
self.ignore=False
def Activated(self):
import polarUtilsCmd as puc
import FreeCAD
doc=FreeCAD.activeDocument()
sketch=doc.addObject("Sketcher::SketchObject","imported")
sketch.Placement = FreeCAD.Placement(FreeCAD.Vector(0.000000,0.000000,0.000000),FreeCAD.Rotation(0.000000,0.000000,0.000000,1.000000))
puc.disegna(sketch,puc.getFromFile())
def createCenteDrill(self):
if FreeCAD.activeDocument() and getPCBheight()[0]:
try:
form = createDrillcenter_Gui()
FreeCADGui.Control.showDialog(form)
except Exception ,e:
FreeCAD.Console.PrintWarning("{0} \n".format(e))
def importDXFface(filename,layer=None,doc=None):
import FreeCAD,importDXF
doc = doc or FreeCAD.activeDocument()
layers = importDXF.processdxf(doc,filename) or importDXF.layers
for l in layers:
if FreeCAD.GuiUp:
for o in l.Group:
o.ViewObject.hide()
l.ViewObject.hide()
groupobj=[go for go in layers if (not layer) or go.Label == layer]
edges=[]
if not groupobj:
raise ValueError, 'import of layer %s failed' % layer
for shapeobj in groupobj[0].Group:
edges.extend(shapeobj.Shape.Edges)
faces = edgestofaces(edges)
# in order to allow multiple import with the same layer name
# we need to remove used objects from the layer group
#shapeobj.Document.removeObject(shapeobj.Name)
#groupobj[0].Document.removeObject(groupobj[0].Name)
for layer in layers: #remove everything that has been imported
layer.removeObjectsFromDocument()
#for obj in layer.Group:
# obj.Document.removeObject(obj.Name)
layer.Document.removeObject(layer.Name)
return faces
def generate_unit_cell(self, mesh_only=False):
'''Generates a complete unit cell from single mesh wires.'''
try:
mesh_lattice_const = float(
self.sb_mesh_lattice_const.text().replace(',', '.')) * 1e-3
wire_diameter = float(self.sb_wire_diameter.text().replace(
',', '.')) * 1e-3
space_above_mesh = float(self.sb_space_above_mesh.text().replace(
',', '.')) * 1e-3
space_below_mesh = float(self.sb_space_below_mesh.text().replace(
',', '.')) * 1e-3
safety_distance = float(
self.sb_safety_distance.text().replace(',', '.')
) * 1e-3 # to prevent overlap of wires, which can cause trouble in later union or common operations and some other glitches
num_blocks = int(self.sb_num_blocks.text().replace(
',', '.')) # Number of wires to be drawn in each direction
except:
diag = QtGui.QMessageBox(QtGui.QMessageBox.Warning,
'Evaluation error',
'Error in evaluating the parameters')
diag.setWindowModality(QtCore.Qt.ApplicationModal)
diag.exec_()
return False
wires = {}
for direction in ["x", "y"]:
wires[direction] = []
for wire_num in range(num_blocks * 4 +
1): # draw 4 wires in each direction
wire = self.generate_wire(wire_diameter,
mesh_lattice_const,
safety_distance=safety_distance,
num_blocks=num_blocks)
# position wire
if direction == "x":
wire.Placement.Base += FreeCAD.Vector(
0, wire_num * mesh_lattice_const, 0)
if wire_num % 2:
wire.Placement.Rotation = FreeCAD.Rotation(
FreeCAD.Vector(1, 0, 0), 180)
else:
wire.Placement.Base += FreeCAD.Vector(
0, 0, 2 * safety_distance)
else:
wire.Placement.Rotation = FreeCAD.Rotation(
FreeCAD.Vector(0, 0, 1), 90)
wire.Placement.Base += FreeCAD.Vector(
wire_num * mesh_lattice_const, 0, 0)
if not wire_num % 2:
wire.Placement.Rotation = wire.Placement.Rotation.multiply(
FreeCAD.Rotation(FreeCAD.Vector(1, 0, 0), 180))
else:
wire.Placement.Base += FreeCAD.Vector(
0, 0, 2 * safety_distance)
wires[direction].append(wire)
mesh = FreeCAD.activeDocument().addObject("Part::MultiFuse", "Mesh")
mesh.Shapes = wires["x"] + wires["y"]
mesh.Placement.Base = FreeCAD.Vector(
-2. * mesh_lattice_const * num_blocks,
-2. * mesh_lattice_const * num_blocks,
0) # translate mesh to origin
if not mesh_only:
gas_box = FreeCAD.activeDocument().addObject("Part::Box", "Gas")
gas_box.Length = mesh_lattice_const * 2.
gas_box.Width = mesh_lattice_const * 2.
gas_box.Height = space_above_mesh + space_below_mesh + wire_diameter * 2.
gas_box.Placement.Base = FreeCAD.Vector(
-mesh_lattice_const, -mesh_lattice_const,
-space_below_mesh - wire_diameter)
unit_cell = FreeCAD.activeDocument().addObject(
"Part::Cut", "Unit Cell")
unit_cell.Base = gas_box
unit_cell.Tool = mesh
mesh.touch() # to force recomputation
FreeCAD.ActiveDocument.recompute()
def run():
'''create a generic panel without data'''
a = FreeCAD.activeDocument().addObject("Part::FeaturePython", "MyMonitor")
ControlPanel(a)
cp = App.activeDocument().addObject("Part::Compound", "Compound")
cp.Links = [c, co]
# fu=App.activeDocument().addObject("Part::MultiFuse","Fusion")
# fu.Shapes = [b,co]
cm = App.activeDocument().addObject("Part::MultiCommon", "Common")
cm.Shapes = [b, co]
for k in [b, c, co, cp]:
k.ViewObject.Transparency = 70
App.ActiveDocument.recompute()
#-------------------------------
a = FreeCAD.activeDocument().addObject("Part::FeaturePython",
"MyControlPanel")
m = ControlPanel(a)
#-----------------------------
#-- add some parameters to control
m.addTarget(c, "Angle", maxV=360, minV=0)
m.addTarget(ss, "A1", maxV=360, minV=0)
# m.addTarget(ss,"B4",maxV=360,minV=0)
if 10:
m.addTarget(c, "Radius")
# m.addTarget(co,"Radius1")
m.addTarget(co, "Radius2")
m.addTarget(co, "Height")
m.addTarget(b, 'Length')
def shouldShow(self):
""" Must show when nothing selected.
"""
return (len(Gui.Selection.getSelectionEx(
App.activeDocument().Name)) == 0)
def IsActive(self):
if FreeCAD.activeDocument() is None: return False
return True
def Activated(self):
if FreeCAD.activeDocument() != None:
FreeCAD.activeDocument().addObject("App::FeatureTest")
else:
FreeCAD.PrintMessage("No active document.\n")
def draw(self):
#helper Variables
width = gv.printableWidth + gv.printBedPadding
length = gv.printableLength + gv.printBedPadding
#Make file and build part
try:
Gui.getDocument("printBedSupport")
Gui.getDocument("printBedSupport").resetEdit()
App.getDocument("printBedSupport").recompute()
App.closeDocument("printBedSupport")
App.setActiveDocument("")
App.ActiveDocument = None
Gui.ActiveDocument = None
except:
pass
#Create Document
App.newDocument("printBedSupport")
App.setActiveDocument("printBedSupport")
App.ActiveDocument = App.getDocument("printBedSupport")
Gui.ActiveDocument = Gui.getDocument("printBedSupport")
#make plate
#Sketch points
p1x = -width / 2
p1y = -length / 2
p2x = -width / 2
p2y = length / 2
p3x = width / 2
p3y = length / 2
p4x = width / 2
p4y = -length / 2
p5x = -(width / 2 - gv.printBedMountHolePadding)
p5y = -(length / 2 - gv.printBedMountHolePadding)
p6x = -(width / 2 - gv.printBedMountHolePadding)
p6y = (length / 2 - gv.printBedMountHolePadding)
p7x = (width / 2 - gv.printBedMountHolePadding)
p7y = (length / 2 - gv.printBedMountHolePadding)
p8x = (width / 2 - gv.printBedMountHolePadding)
p8y = -(length / 2 - gv.printBedMountHolePadding)
p9x = (width / 2 - gv.printBedMountHolePadding)
p9y = length / 2
p10x = width / 2
p10y = (length / 2 - gv.printBedMountHolePadding)
App.activeDocument().addObject('Sketcher::SketchObject', 'Sketch')
App.activeDocument().Sketch.Placement = App.Placement(
App.Vector(0.000000, 0.000000, 0.000000),
App.Rotation(0.000000, 0.000000, 0.000000, 1.000000))
Gui.activeDocument().activeView().setCamera(
'#Inventor V2.1 ascii \n OrthographicCamera {\n viewportMapping ADJUST_CAMERA \n position 0 0 87 \n orientation 0 0 1 0 \n nearDistance -112.88701 \n farDistance 287.28702 \n aspectRatio 1 \n focalDistance 87 \n height 143.52005 }'
)
# Gui.activeDocument().setEdit('Sketch')
App.ActiveDocument.Sketch.addGeometry(
Part.Line(App.Vector(p1x, p1y, 0), App.Vector(p4x, p4y, 0)))
App.ActiveDocument.Sketch.addGeometry(
Part.Line(App.Vector(p4x, p4y, 0), App.Vector(p3x, p3y, 0)))
App.ActiveDocument.Sketch.addGeometry(
Part.Line(App.Vector(p3x, p3y, 0), App.Vector(p2x, p2y, 0)))
App.ActiveDocument.Sketch.addGeometry(
Part.Line(App.Vector(p2x, p2y, 0), App.Vector(p1x, p1y, 0)))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 0, 2, 1, 1))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 1, 2, 2, 1))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 2, 2, 3, 1))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 3, 2, 0, 1))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Horizontal', 0))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Horizontal', 2))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Vertical', 1))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Vertical', 3))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Symmetric', 1, 2, 0, 1, -1, 1))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addGeometry(
Part.Line(App.Vector(p5x, p5y, 0), App.Vector(p8x, p8y, 0)))
App.ActiveDocument.Sketch.addGeometry(
Part.Line(App.Vector(p8x, p8y, 0), App.Vector(p7x, p7y, 0)))
App.ActiveDocument.Sketch.addGeometry(
Part.Line(App.Vector(p7x, p7y, 0), App.Vector(p6x, p6y, 0)))
App.ActiveDocument.Sketch.addGeometry(
Part.Line(App.Vector(p6x, p6y, 0), App.Vector(p5x, p5y, 0)))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 4, 2, 5, 1))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 5, 2, 6, 1))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 6, 2, 7, 1))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 7, 2, 4, 1))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Horizontal', 4))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Horizontal', 6))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Vertical', 5))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Vertical', 7))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addGeometry(
Part.Line(App.Vector(p9x, p9y, 0), App.Vector(p7x, p7y, 0)))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('PointOnObject', 8, 1, 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 8, 2, 5, 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addGeometry(
Part.Line(App.Vector(p7x, p7y, 0), App.Vector(p10x, p10y, 0)))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 8, 2, 9, 1))
App.ActiveDocument.recompute()
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('PointOnObject', 9, 2, 1))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Horizontal', 9))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Vertical', 8))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Equal', 8, 9))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.movePoint(4, 0,
App.Vector(0.000000, 0.000000, 0),
1)
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.toggleConstruction(6)
App.ActiveDocument.Sketch.toggleConstruction(5)
App.ActiveDocument.Sketch.toggleConstruction(7)
App.ActiveDocument.Sketch.toggleConstruction(4)
App.ActiveDocument.Sketch.toggleConstruction(8)
App.ActiveDocument.Sketch.toggleConstruction(9)
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addGeometry(
Part.Circle(App.Vector(p6x, p6y, 0), App.Vector(0, 0, 1),
gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 10, 3, 6, 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addGeometry(
Part.Circle(App.Vector(p7x, p7y, 0), App.Vector(0, 0, 1),
gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 11, 3, 5, 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addGeometry(
Part.Circle(App.Vector(p5x, p5y, 0), App.Vector(0, 0, 1),
gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 12, 3, 4, 1))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addGeometry(
Part.Circle(App.Vector(p8x, p8y, 0), App.Vector(0, 0, 1),
gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 13, 3, 4, 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Equal', 13, 12))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Equal', 12, 10))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Equal', 10, 11))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Symmetric', 5, 2, 4, 1, -1, 1))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('DistanceY', 1, length))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('DistanceX', 0, width))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint(
'DistanceX', 9,
gv.printBedMountHolePadding + gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Radius', 10, gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.movePoint(
4, 1, App.Vector(-37.291931, -32.210766, 0), 0)
App.ActiveDocument.recompute()
# Gui.getDocument('printBedSupport').resetEdit()
App.getDocument('printBedSupport').recompute()
App.activeDocument().addObject("PartDesign::Pad", "Pad")
App.activeDocument().Pad.Sketch = App.activeDocument().Sketch
App.activeDocument().Pad.Length = 10.0
App.ActiveDocument.recompute()
Gui.activeDocument().hide("Sketch")
App.ActiveDocument.Pad.Length = gv.printBedSupportThickness
App.ActiveDocument.Pad.Reversed = 0
App.ActiveDocument.Pad.Midplane = 0
App.ActiveDocument.Pad.Length2 = 100.000000
App.ActiveDocument.Pad.Type = 0
App.ActiveDocument.Pad.UpToFace = None
App.ActiveDocument.recompute()
# Gui.activeDocument().resetEdit()
#Make holes for y bushing mounts
#Sketch Points
p1x = -gv.yRodSpacing / 2
p1y = -length / 2
p2x = -gv.yRodSpacing / 2
p2y = length / 2
p3x = gv.yRodSpacing / 2
p3y = -length / 2
p4x = gv.yRodSpacing / 2
p4y = length / 2
p5x = -gv.yRodSpacing / 2 - gv.yBushingMountSlotSpacing / 2
p5y = -gv.yBushingNutSeparation / 2
p6x = -gv.yRodSpacing / 2 + gv.yBushingMountSlotSpacing / 2
p6y = -gv.yBushingNutSeparation / 2
p7x = -gv.yRodSpacing / 2 - gv.yBushingMountSlotSpacing / 2
p7y = gv.yBushingNutSeparation / 2
p8x = -gv.yRodSpacing / 2 + gv.yBushingMountSlotSpacing / 2
p8y = gv.yBushingNutSeparation / 2
p9x = gv.yRodSpacing / 2 - gv.yBushingMountSlotSpacing / 2
p9y = -gv.yBushingNutSeparation / 2
p10x = gv.yRodSpacing / 2 + gv.yBushingMountSlotSpacing / 2
p10y = -gv.yBushingNutSeparation / 2
p11x = gv.yRodSpacing / 2 - gv.yBushingMountSlotSpacing / 2
p11y = gv.yBushingNutSeparation / 2
p12x = gv.yRodSpacing / 2 + gv.yBushingMountSlotSpacing / 2
p12y = gv.yBushingNutSeparation / 2
p13x = p1x
p13y = p5y
p14x = p1x
p14y = p7y
p15x = p3x
p15y = p5y
p16x = p3x
p16y = p7y
#Make Sketch
App.activeDocument().addObject('Sketcher::SketchObject', 'Sketch001')
App.activeDocument().Sketch001.Support = uf.getFace(
App.ActiveDocument.Pad, None, None, None, None,
gv.printBedSupportThickness, 0)
App.activeDocument().recompute()
# Gui.activeDocument().setEdit('Sketch001')
App.ActiveDocument.Sketch001.addExternal(
"Pad",
uf.getEdge(App.ActiveDocument.Pad, 0, 0, length / 2, 0,
gv.printBedSupportThickness, 0))
App.ActiveDocument.Sketch001.addExternal(
"Pad",
uf.getEdge(App.ActiveDocument.Pad, 0, 0, -length / 2, 0,
gv.printBedSupportThickness, 0))
App.ActiveDocument.Sketch001.addGeometry(
Part.Line(App.Vector(p1x, p1y, 0), App.Vector(p2x, p2y, 0)))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('PointOnObject', 0, 1, -4))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(
Part.Line(App.Vector(p3x, p3y, 0), App.Vector(p4x, p4y, 0)))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('PointOnObject', 1, 1, -4))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Symmetric', 1, 2, 0, 2, -2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(
Part.Line(App.Vector(p5x, p5y, 0), App.Vector(p6x, p6y, 0)))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Horizontal', 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(
Part.Line(App.Vector(p7x, p7y, 0), App.Vector(p8x, p8y, 0)))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Horizontal', 3))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(
Part.Line(App.Vector(p9x, p9y, 0), App.Vector(p10x, p10y, 0)))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(
Part.Line(App.Vector(p11x, p11y, 0), App.Vector(p12x, p12y, 0)))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Horizontal', 5))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Horizontal', 4))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Equal', 3, 5))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Equal', 5, 4))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Equal', 4, 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Symmetric', 3, 2, 3, 1, 0))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Symmetric', 2, 2, 2, 1, 0))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Symmetric', 5, 2, 5, 1, 1))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Symmetric', 4, 2, 4, 1, 1))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('PointOnObject', 3, 2, 5))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('PointOnObject', 0, 2, -3))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('PointOnObject', 2, 2, 4))
App.ActiveDocument.recompute()
#Add Dimmensions early to avoid squishing sketch
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Distance', 5, 2, 4, gv.yBushingNutSeparation))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Distance', 1, 1, 0, 1, gv.yRodSpacing))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('DistanceX', 4, gv.yBushingMountSlotSpacing))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Symmetric', 3, 1, 2, 1, -1))
App.ActiveDocument.recompute()
#continue adding other constraints
App.ActiveDocument.Sketch001.toggleConstruction(0)
App.ActiveDocument.Sketch001.toggleConstruction(1)
App.ActiveDocument.Sketch001.toggleConstruction(5)
App.ActiveDocument.Sketch001.toggleConstruction(4)
App.ActiveDocument.Sketch001.toggleConstruction(2)
App.ActiveDocument.Sketch001.toggleConstruction(3)
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(
Part.Circle(App.Vector(p5x, p5y, 0), App.Vector(0, 0, 1),
gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Coincident', 6, 3, 2, 1))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(
Part.Circle(App.Vector(p6x, p6y, 0), App.Vector(0, 0, 1),
gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Coincident', 7, 3, 2, 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(
Part.Circle(App.Vector(p7x, p7y, 0), App.Vector(0, 0, 1),
gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Coincident', 8, 3, 3, 1))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(
Part.Circle(App.Vector(p8x, p8y, 0), App.Vector(0, 0, 1),
gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Coincident', 9, 3, 3, 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(
Part.Circle(App.Vector(p9x, p9y, 0), App.Vector(0, 0, 1),
gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Coincident', 10, 3, 5, 1))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(
Part.Circle(App.Vector(p10x, p10y, 0), App.Vector(0, 0, 1),
gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Coincident', 11, 3, 5, 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(
Part.Circle(App.Vector(p11x, p11y, 0), App.Vector(0, 0, 1),
gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Coincident', 12, 3, 4, 1))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(
Part.Circle(App.Vector(p12x, p12y, 0), App.Vector(0, 0, 1),
gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Coincident', 13, 3, 4, 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Equal', 6, 7))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Equal', 7, 8))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Equal', 8, 9))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Equal', 9, 10))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Equal', 10, 11))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Equal', 11, 12))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Equal', 12, 13))
App.ActiveDocument.recompute()
#Add hole Dimensions
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Radius', 11, gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
#Cut bushing mount holes through all
App.activeDocument().addObject("PartDesign::Pocket", "Pocket")
App.activeDocument().Pocket.Sketch = App.activeDocument().Sketch001
App.activeDocument().Pocket.Length = 5.0
App.ActiveDocument.recompute()
Gui.activeDocument().hide("Sketch001")
Gui.activeDocument().hide("Pad")
# Gui.activeDocument().setEdit('Pocket')
# Gui.ActiveDocument.Pocket.ShapeColor=Gui.ActiveDocument.Pad.ShapeColor
# Gui.ActiveDocument.Pocket.LineColor=Gui.ActiveDocument.Pad.LineColor
# Gui.ActiveDocument.Pocket.PointColor=Gui.ActiveDocument.Pad.PointColor
App.ActiveDocument.Pocket.Length = 5.000000
App.ActiveDocument.Pocket.Type = 1
App.ActiveDocument.Pocket.UpToFace = None
App.ActiveDocument.recompute()
# Gui.activeDocument().resetEdit()
#Make holes for y belt anchor
#Sketch points
p1x = gv.yMotorPulleyDia / 2
p1y = gv.yBeltAnchorHoleSpacing / 2
p2x = p1x
p2y = -p1y
#Make Sketch
App.activeDocument().addObject('Sketcher::SketchObject', 'Sketch002')
App.activeDocument().Sketch002.Support = uf.getFace(
App.ActiveDocument.Pocket, None, None, None, None,
gv.printBedSupportThickness, 0)
App.activeDocument().recompute()
# Gui.activeDocument().setEdit('Sketch002')
App.ActiveDocument.Sketch002.addGeometry(
Part.Circle(App.Vector(p1x, p1y, 0), App.Vector(0, 0, 1),
gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addGeometry(
Part.Circle(App.Vector(p2x, p2y, 0), App.Vector(0, 0, 1),
gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Symmetric', 0, 3, 1, 3, -1))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Equal', 0, 1))
App.ActiveDocument.recompute()
#Add dimensions
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Radius', 0, gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('DistanceX', -2, 1, 1, 3,
gv.yMotorPulleyDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Distance', 0, 3, 1, 3,
gv.yBeltAnchorHoleSpacing))
App.ActiveDocument.recompute()
# Gui.getDocument('printBedSupport').resetEdit()
App.getDocument('printBedSupport').recompute()
#Cut holes
App.activeDocument().addObject("PartDesign::Pocket", "Pocket001")
App.activeDocument().Pocket001.Sketch = App.activeDocument().Sketch002
App.activeDocument().Pocket001.Length = 5.0
App.ActiveDocument.recompute()
Gui.activeDocument().hide("Sketch002")
Gui.activeDocument().hide("Pocket")
# Gui.ActiveDocument.Pocket001.ShapeColor=Gui.ActiveDocument.Pocket.ShapeColor
# Gui.ActiveDocument.Pocket001.LineColor=Gui.ActiveDocument.Pocket.LineColor
# Gui.ActiveDocument.Pocket001.PointColor=Gui.ActiveDocument.Pocket.PointColor
App.ActiveDocument.Pocket001.Length = 5.000000
App.ActiveDocument.Pocket001.Type = 1
App.ActiveDocument.Pocket001.UpToFace = None
App.ActiveDocument.recompute()
def onImport(self):
Bbox = GIS2BIM.CreateBoundingBox(float(self.X), float(self.Y),
float(self.bboxWidth.text()),
float(self.bboxHeight.text()), 2)
width = float(self.bboxWidth.text())
height = float(self.bboxHeight.text())
GIS2BIM_FreeCAD.CreateLayer("PDOK")
fileLocationWMS = self.tempFolderPath + "wms.jpg"
#Create Cadastral Parcels 2D
if self.clsCad.isChecked() is True:
GIS_2D_Cadastral_Parcel = GIS2BIM_FreeCAD.CreateLayer(
"GIS_2D_Cadastral_Parcel")
CadastralParcelCurves = GIS2BIM_FreeCAD.CurvesFromWFS(
GIS2BIM_NL.NLPDOKCadastreCadastralParcels, Bbox,
GIS2BIM_NL.NLPDOKxPathOpenGISposList, -float(self.X),
-float(self.Y), 1000, 3, False, False, u"Dashdot",
(0.0, 0.0, 0.0))
FreeCAD.activeDocument().getObject(
"GIS_2D_Cadastral_Parcel").addObjects(CadastralParcelCurves)
FreeCAD.activeDocument().getObject("PDOK").addObject(
FreeCAD.activeDocument().getObject("GIS_2D_Cadastral_Parcel"))
#Create Building outline 2D
if self.clsBld.isChecked() is True:
GIS_2D_Building_Outline = GIS2BIM_FreeCAD.CreateLayer(
"GIS_2D_Building_Outline")
BAGCurves = GIS2BIM_FreeCAD.CurvesFromWFS(
GIS2BIM_NL.NLPDOKBAGBuildingCountour, Bbox,
GIS2BIM_NL.NLPDOKxPathOpenGISposList, -float(self.X),
-float(self.Y), 1000, 3, True, True, u"Solid", (0.7, 0.0, 0.0))
FreeCAD.activeDocument().getObject(
"GIS_2D_Building_Outline").addObjects(BAGCurves)
FreeCAD.activeDocument().getObject("PDOK").addObject(
FreeCAD.activeDocument().getObject("GIS_2D_Building_Outline"))
#Create 3D Building BAG 3D V2
if self.clsBAG3D.isChecked() is True:
dx = -float(self.X) * 1000
dy = -float(self.Y) * 1000
bboxString = GIS2BIM.CreateBoundingBox(
float(
GIS2BIM_FreeCAD.ArchSiteCreateCheck(self.sitename).CRS_x),
float(
GIS2BIM_FreeCAD.ArchSiteCreateCheck(self.sitename).CRS_y),
float(self.bboxWidth.text()), float(self.bboxHeight.text()), 0)
jsonFileNames = GIS2BIM_NL.BAG3DDownload(Bbox, self.tempFolderPath)
#Import JSON
for jsonFile in jsonFileNames:
meshes = GIS2BIM_FreeCAD.CityJSONImport(
jsonFile, self.X, self.Y, 2, float(self.bboxWidth.text()),
float(self.bboxHeight.text()))
FreeCAD.activeDocument().getObject("PDOK").addObject(
FreeCAD.activeDocument().getObject("CityJSON"))
# Import Aerialphoto in view
if self.clsAerial.isChecked() is True:
GIS_Raster = GIS2BIM_FreeCAD.CreateLayer("GIS_Raster")
a = GIS2BIM.WMSRequest(
GIS2BIM.GetWebServerData("NL_PDOK_Luchtfoto_2020_28992",
"webserverRequests",
"serverrequestprefix"), Bbox,
fileLocationWMS, 3000, 3000)
ImageAerialPhoto = GIS2BIM_FreeCAD.ImportImage(
fileLocationWMS, width, height, 1000, "luchtfoto2020", 0, 0)
ImageAerialPhoto.addProperty("App::PropertyString",
"WMSRequestURL")
ImageAerialPhoto.WMSRequestURL = a[2]
FreeCAD.activeDocument().getObject("GIS_Raster").addObject(
FreeCAD.activeDocument().getObject(ImageAerialPhoto.Label))
FreeCAD.activeDocument().getObject("PDOK").addObject(
FreeCAD.activeDocument().getObject("GIS_Raster"))
#Create Textdata Cadastral Parcels
if self.clsAnnotation.isChecked() is True:
GIS_Annotation = GIS2BIM_FreeCAD.CreateLayer("GIS_Annotation")
textDataCadastralParcels = GIS2BIM.DataFromWFS(
GIS2BIM_NL.NLPDOKCadastreCadastralParcelsNummeraanduiding,
Bbox, GIS2BIM_NL.NLPDOKxPathOpenGISPos,
GIS2BIM_NL.xPathStringsCadastreTextAngle, -float(self.X),
-float(self.Y), 1000, 3)
textDataOpenbareRuimtenaam = GIS2BIM.DataFromWFS(
GIS2BIM_NL.NLPDOKCadastreOpenbareruimtenaam, Bbox,
GIS2BIM_NL.NLPDOKxPathOpenGISPos,
GIS2BIM_NL.xPathStringsCadastreTextAngle, -float(self.X),
-float(self.Y), 1000, 3)
placeTextFreeCAD1 = GIS2BIM_FreeCAD.PlaceText(
textDataCadastralParcels, 500, 0)
placeTextFreeCAD2 = GIS2BIM_FreeCAD.PlaceText(
textDataOpenbareRuimtenaam, 2000, 1)
FreeCAD.activeDocument().getObject("GIS_Annotation").addObjects(
placeTextFreeCAD1)
FreeCAD.activeDocument().getObject("GIS_Annotation").addObjects(
placeTextFreeCAD2)
FreeCAD.activeDocument().getObject("PDOK").addObject(
FreeCAD.activeDocument().getObject("GIS_Annotation"))
#Create Ruimtelijke plannen outline 2D
if self.clsBouwvlak.isChecked() is True:
GIS_2D_Ruimtelijke_Plannen = GIS2BIM_FreeCAD.CreateLayer(
"GIS_2D_Ruimtelijke_Plannen")
RuimtelijkePlannenBouwvlakCurves = GIS2BIM_FreeCAD.CurvesFromWFS(
GIS2BIM_NL.NLRuimtelijkeplannenBouwvlak, Bbox,
".//{http://www.opengis.net/gml}posList", -float(self.X),
-float(self.Y), 1000, 3, False, False, u"Solid",
(0.0, 0.0, 1.0))
FreeCAD.activeDocument().getObject(
"GIS_2D_Ruimtelijke_Plannen").addObjects(
RuimtelijkePlannenBouwvlakCurves)
FreeCAD.activeDocument().getObject("PDOK").addObject(
FreeCAD.activeDocument().getObject(
"GIS_2D_Ruimtelijke_Plannen"))
#Create BGT 2D
if self.clsBGT.isChecked() is True:
timeout = 150
folderBGT = GIS2BIM_FreeCAD.CreateTempFolder(self.tempFolderName +
'/BGT')
filepathZIP = folderBGT + '.zip'
#Download BGT
URL = GIS2BIM_NL.bgtDownloadURL(float(self.X), float(self.Y),
float(self.bboxWidth.text()),
float(self.bboxHeight.text()),
timeout)
GIS2BIM.downloadUnzip(URL, filepathZIP, folderBGT)
#Create Curves
bgt_curves_faces = [
"bgt_begroeidterreindeel", "bgt_onbegroeidterreindeel",
"bgt_ondersteunendwaterdeel", "bgt_ondersteunendwegdeel",
"bgt_overbruggingsdeel", "bgt_overigbouwwerk", "bgt_waterdeel",
"bgt_wegdeel"
]
bgt_curves_faces_color = [(223 / 255, 230 / 255, 208 / 255),
(223 / 255, 230 / 255, 208 / 255),
(205 / 255, 230 / 255, 237 / 255),
(226 / 255, 226 / 255, 226 / 255),
(234 / 255, 234 / 255, 234 / 255),
(220 / 255, 155 / 255, 140 / 255),
(205 / 255, 230 / 255, 237 / 255),
(234 / 255, 234 / 255, 234 / 255)]
bgt_curves_lines = [
"bgt_functioneelgebied", "bgt_gebouwinstallatie",
"bgt_kunstwerkdeel", "bgt_overbruggingsdeel",
"bgt_overigbouwwerk", "bgt_overigescheiding", "bgt_scheiding",
"bgt_spoor", "bgt_tunneldeel"
]
xpath = './/{http://www.opengis.net/gml}posList'
GIS2BIM_FreeCAD.CreateLayer("BGT")
#Draw bgt_curves_lines
for i in bgt_curves_lines:
path = folderBGT + '/' + i + '.gml'
tree = ET.parse(path)
Curves = GIS2BIM_FreeCAD.CurvesFromGML(
tree, xpath, -float(self.X), -float(self.Y),
float(self.bboxWidth.text()),
float(self.bboxHeight.text()), 1000, 0, 0, 0, "Solid",
(0.7, 0.0, 0.0), (0.0, 0.0, 0.0))
GIS2BIM_FreeCAD.CreateLayer(i)
FreeCAD.activeDocument().getObject(i).addObjects(Curves)
FreeCAD.activeDocument().getObject("BGT").addObject(
FreeCAD.activeDocument().getObject(i))
FreeCAD.ActiveDocument.recompute()
for i, j in zip(bgt_curves_faces, bgt_curves_faces_color):
path = folderBGT + '/' + i + '.gml'
tree = ET.parse(path)
Curves = GIS2BIM_FreeCAD.CurvesFromGML(
tree, xpath, -float(self.X), -float(self.Y),
float(self.bboxWidth.text()),
float(self.bboxHeight.text()), 1000, 2, 1, 1, "Solid",
(0.7, 0.0, 0.0), j)
GIS2BIM_FreeCAD.CreateLayer(i)
FreeCAD.activeDocument().getObject(i).addObjects(Curves)
FreeCAD.activeDocument().getObject("BGT").addObject(
FreeCAD.activeDocument().getObject(i))
FreeCAD.ActiveDocument.recompute()
FreeCAD.activeDocument().getObject("PDOK").addObject(
FreeCAD.activeDocument().getObject("BGT"))
# Import bestemmingsplankaart
if self.clsBestemmingsplan.isChecked() is True:
GIS_Raster = GIS2BIM_FreeCAD.CreateLayer("GIS_Raster")
a = GIS2BIM.WMSRequest(
GIS2BIM.GetWebServerData(
"NL_INSPIRE_Ruimtelijke_Plannen_Totaal_28992",
"webserverRequests", "serverrequestprefix"), Bbox,
fileLocationWMS, 3000, 3000)
ImageAerialPhoto = GIS2BIM_FreeCAD.ImportImage(
fileLocationWMS, width, height, 1000, "Ruimtelijke Plannen", 0,
0)
ImageAerialPhoto.addProperty("App::PropertyString",
"WMSRequestURL")
ImageAerialPhoto.WMSRequestURL = a[2]
FreeCAD.activeDocument().getObject("GIS_Raster").addObject(
FreeCAD.activeDocument().getObject(ImageAerialPhoto.Label))
FreeCAD.activeDocument().getObject("PDOK").addObject(
FreeCAD.activeDocument().getObject("GIS_Raster"))
FreeCAD.ActiveDocument.recompute()
self.close()
def make_fillet(objs, radius=100, chamfer=False, delete=False):
"""Create a fillet between two lines or Part.Edges.
Parameters
----------
objs: list
List of two objects of type wire, or edges.
radius: float, optional
It defaults to 100. The curvature of the fillet.
chamfer: bool, optional
It defaults to `False`. If it is `True` it no longer produces
a rounded fillet but a chamfer (straight edge)
with the value of the `radius`.
delete: bool, optional
It defaults to `False`. If it is `True` it will delete
the pair of objects that are used to create the fillet.
Otherwise, the original objects will still be there.
Returns
-------
Part::Part2DObjectPython
The object of Proxy type `'Fillet'`.
It returns `None` if it fails producing the object.
"""
_name = "make_fillet"
utils.print_header(_name, "Fillet")
if len(objs) != 2:
_err(_tr("Two elements are needed."))
return None
e1, e2 = _extract_edges(objs)
edges = DraftGeomUtils.fillet([e1, e2], radius, chamfer)
if len(edges) < 3:
_err(_tr("Radius is too large") + ", r={}".format(radius))
return None
lengths = [edges[0].Length, edges[1].Length, edges[2].Length]
_msg(_tr("Segment") + " 1, " + _tr("length:") + " {}".format(lengths[0]))
_msg(_tr("Segment") + " 2, " + _tr("length:") + " {}".format(lengths[1]))
_msg(_tr("Segment") + " 3, " + _tr("length:") + " {}".format(lengths[2]))
try:
wire = Part.Wire(edges)
except Part.OCCError:
return None
_doc = App.activeDocument()
obj = _doc.addObject("Part::Part2DObjectPython",
"Fillet")
fillet.Fillet(obj)
obj.Shape = wire
obj.Length = wire.Length
obj.Start = wire.Vertexes[0].Point
obj.End = wire.Vertexes[-1].Point
obj.FilletRadius = radius
if delete:
_doc.removeObject(objs[0].Name)
_doc.removeObject(objs[1].Name)
_msg(_tr("Removed original objects."))
if App.GuiUp:
view_fillet.ViewProviderFillet(obj.ViewObject)
gui_utils.format_object(obj)
gui_utils.select(obj)
gui_utils.autogroup(obj)
return obj
def shouldShow(self):
return (len(Gui.Selection.getSelectionEx(
App.activeDocument().Name)) == 0)
import FreeCAD, Part, Drawing, math, Mesh, importDXF
DOC = FreeCAD.activeDocument()
DOC_NAME = "part_blade"
def clear_doc():
# Clear the active document deleting all the objects
for obj in DOC.Objects:
DOC.removeObject(obj.Name)
def setview():
# Rearrange View
FreeCAD.Gui.SendMsgToActiveView("ViewFit")
FreeCAD.Gui.activeDocument().activeView().viewAxometric()
if DOC is None:
FreeCAD.newDocument(DOC_NAME)
FreeCAD.setActiveDocument(DOC_NAME)
DOC = FreeCAD.activeDocument()
else:
clear_doc()
# EPS= tolerance to use to cut the parts
EPS = 0.10
EPS_C = EPS * (-0.5)
diametre_maximal = 406.4 - 8 * 2 - 5 * 2
mh1Y = button1Y - 300
mh2Y = button3Y + 300
self.button1 = Button(self.name+"_button1",\
Base.Vector(buttonX,button1Y,\
self.origin.z+self._boardThick))
self.button2 = Button(self.name+"_button2",\
Base.Vector(buttonX,button2Y,\
self.origin.z+self._boardThick))
self.button3 = Button(self.name+"_button3",\
Base.Vector(buttonX,button3Y,\
self.origin.z+self._boardThick))
self.mh1 = Base.Vector(mhX,mh1Y,self.origin.z)
self.mh2 = Base.Vector(mhX,mh2Y,self.origin.z)
self.board = self.board.cut(Part.Face(Part.Wire(\
Part.makeCircle(self._mholerad,\
self.mh1))\
).extrude(Base.Vector(0,0,self._boardThick)))
self.board = self.board.cut(Part.Face(Part.Wire(\
Part.makeCircle(self._mholerad,\
self.mh2))\
).extrude(Base.Vector(0,0,self._boardThick)))
if __name__ == '__main__':
App.ActiveDocument=App.newDocument("ButtonBoard")
doc = App.activeDocument()
buttonBoard = ButtonBoard("buttonboard",Base.Vector(0,0,0))
buttonBoard.show()
Gui.SendMsgToActiveView("ViewFit")
Gui.activeDocument().activeView().viewIsometric()
def getUnderwaterSide(shape, force=True):
"""Get the underwater shape, simply cropping the provided shape by the z=0
free surface plane.
Position arguments:
shape -- Solid shape to be cropped
Keyword arguments:
force -- True if in case the common boolean operation fails, i.e. returns
no solids, the tool should retry it slightly moving the free surface. False
otherwise. (True by default)
Returned value:
Cropped shape. It is not modifying the input shape
"""
# Convert the shape into an active object
Part.show(shape)
orig = App.ActiveDocument.Objects[-1]
guiObj = Gui.ActiveDocument.getObject(orig.Name)
guiObj.ShowInTree = False
bbox = shape.BoundBox
xmin = Units.Quantity(bbox.XMin, Units.Length)
xmax = Units.Quantity(bbox.XMax, Units.Length)
ymin = Units.Quantity(bbox.YMin, Units.Length)
ymax = Units.Quantity(bbox.YMax, Units.Length)
zmin = Units.Quantity(bbox.ZMin, Units.Length)
zmax = Units.Quantity(bbox.ZMax, Units.Length)
# Create the "sea" box to intersect the ship
L = xmax - xmin
B = ymax - ymin
H = zmax - zmin
box = App.ActiveDocument.addObject("Part::Box", "Box")
box.Placement = Placement(Vector(xmin - L, ymin - B, zmin - H),
Rotation(App.Vector(0, 0, 1), 0))
box.Length = 3.0 * L
box.Width = 3.0 * B
box.Height = -zmin + H
guiObj = Gui.ActiveDocument.getObject(box.Name)
guiObj.ShowInTree = False
App.ActiveDocument.recompute()
common = App.activeDocument().addObject("Part::MultiCommon",
"UnderwaterSideHelper")
common.Shapes = [orig, box]
guiObj = Gui.ActiveDocument.getObject(common.Name)
guiObj.ShowInTree = False
App.ActiveDocument.recompute()
if force and len(common.Shape.Solids) == 0:
# The common operation is failing, let's try moving a bit the free
# surface
msg = QtGui.QApplication.translate(
"ship_console",
"Boolean operation failed when trying to get the underwater side."
" The tool is retrying such operation slightly moving the free"
" surface position", None)
App.Console.PrintWarning(msg + '\n')
random_bounds = 0.01 * H.Value
i = 0
while len(common.Shape.Solids) == 0 and i < COMMON_BOOLEAN_ITERATIONS:
i += 1
dH = Units.Quantity(random.uniform(-random_bounds, random_bounds),
Units.Length)
box.Height = -zmin + H + dH
App.ActiveDocument.recompute()
out = common.Shape
App.ActiveDocument.removeObject(common.Name)
App.ActiveDocument.removeObject(orig.Name)
App.ActiveDocument.removeObject(box.Name)
App.ActiveDocument.recompute()
return out
continue
if ob.propertyDict.get(b'a2p_Version', None) != None:
out.append(ob)
continue
return out
def getSpreadsheetObjects(self):
if not self.successfulOpened: return []
out = []
for ob in self.objects:
if ob.propertyDict.get(b'cells', None) != None:
out.append(ob)
return out
def getObjectByName(self, name):
if not self.successfulOpened: return None
for ob in self.objects:
if ob.name == name:
return ob
return None
#==============================================================================
if __name__ == "__main__":
doc = FreeCAD.activeDocument()
fileName = doc.FileName
dr = FCdocumentReader()
dr.openDocument(fileName)
def n_points_line_command():
""" This command use the selected object(s) to try to build a
NPointsLine feature object.
"""
m_sel, m_act_doc = getSel(WF.verbose())
points_from = ["Points", "Curves", "Objects"]
try:
number_of_vertexes, vertex_list = m_sel.get_pointsWithNames(
get_from=points_from)
if number_of_vertexes < 2:
raise Exception(M_EXCEPTION_MSG)
try:
m_main_dir = "WorkAxis_P"
m_sub_dir = "Set000"
m_group = createFolders(str(m_main_dir))
# Create a sub group if needed
if M_SVD_FLAG:
m_group = createSubGroup(m_act_doc, m_main_dir, m_sub_dir)
points = []
# Case of only 2 points
if number_of_vertexes == 2:
if WF.verbose():
print_msg("Process only 2 points")
vertex1 = vertex_list[0]
vertex2 = vertex_list[1]
points.append(vertex1)
points.append(vertex2)
if WF.verbose():
print_msg("vertex1 = " + str(vertex1))
print_msg("vertex2 = " + str(vertex2))
App.ActiveDocument.openTransaction(M_MACRO)
selfobj, m_inst = makeNPointsLineFeature(m_group)
m_inst.addSubobjects(selfobj, points)
selfobj.VectorIndex = '1'
selfobj.Proxy.execute(selfobj)
if M_SVD_FLAG:
App.ActiveDocument.openTransaction(M_MACRO)
selfobj, m_inst = makeNPointsLineFeature(m_group)
m_inst.addSubobjects(selfobj, points)
selfobj.VectorIndex = '2'
selfobj.Proxy.execute(selfobj)
App.ActiveDocument.openTransaction(M_MACRO)
selfobj, m_inst = makeNPointsLineFeature(m_group)
m_inst.addSubobjects(selfobj, points)
selfobj.VectorIndex = '3'
selfobj.Proxy.execute(selfobj)
# Case of more than 2 points
else:
if WF.verbose():
print_msg("Process more than 2 points")
for i in range(number_of_vertexes):
vertex = vertex_list[i]
points.append(vertex)
if WF.verbose():
print_msg("vertex = " + str(vertex))
App.ActiveDocument.openTransaction(M_MACRO)
selfobj, m_inst = makeNPointsLineFeature(m_group)
m_inst.addSubobjects(selfobj, points)
selfobj.VectorIndex = '1'
selfobj.Proxy.execute(selfobj)
if M_SVD_FLAG:
App.ActiveDocument.openTransaction(M_MACRO)
selfobj, m_inst = makeNPointsLineFeature(m_group)
m_inst.addSubobjects(selfobj, points)
selfobj.VectorIndex = '2'
selfobj.Proxy.execute(selfobj)
App.ActiveDocument.openTransaction(M_MACRO)
selfobj, m_inst = makeNPointsLineFeature(m_group)
m_inst.addSubobjects(selfobj, points)
selfobj.VectorIndex = '3'
selfobj.Proxy.execute(selfobj)
except Exception as err:
printError_msg(err.args[0], title=M_MACRO)
except Exception as err:
printError_msgWithTimer(err.args[0], title=M_MACRO)
App.ActiveDocument.commitTransaction()
App.activeDocument().recompute()
def methodC(self, obj):
print "my method C"
FreeCAD.activeDocument().recompute()
def draw(self):
try:
Gui.getDocument(self.name)
Gui.getDocument(self.name).resetEdit()
App.getDocument(self.name).recompute()
App.closeDocument(self.name)
App.setActiveDocument("")
App.ActiveDocument=None
Gui.ActiveDocument=None
except:
pass
#make document
App.newDocument(self.name)
App.setActiveDocument(self.name)
App.ActiveDocument=App.getDocument(self.name)
Gui.ActiveDocument=Gui.getDocument(self.name)
#extrude crossBarTop
uf.extrudeFrameMember(self.name, gv.crossBarLength)
if gv.zMotorMountLocation == "Bottom":
return
#Make Holes for zMotorMount plates
#Sketch points
p1x = 0
p1y = 0
p2x = p1x
p2y = gv.frameWidth/2+gv.zRodZScrewDist-gv.zMotorMountPlateWidth/4
p3x = p1x
p3y = gv.frameWidth/2+gv.zRodZScrewDist+gv.zMotorMountPlateWidth/4
p4x = p1x
p4y = gv.crossBarLength - (gv.frameWidth/2+gv.zRodZScrewDist+gv.zMotorMountPlateWidth/4)
p5x = p1x
p5y = gv.crossBarLength - (gv.frameWidth/2+gv.zRodZScrewDist-gv.zMotorMountPlateWidth/4)
p6x = p1x
p6y = gv.crossBarLength
#Make Sketch
App.activeDocument().addObject('Sketcher::SketchObject','Sketch001')
App.activeDocument().Sketch001.Support = (App.ActiveDocument.Pad,["Face2"])
App.activeDocument().recompute()
# Gui.activeDocument().setEdit('Sketch001')
App.ActiveDocument.Sketch001.addExternal("Pad","Edge7")
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(Part.Line(App.Vector(p1x,p1y,0),App.Vector(p2x,p2y,0)))
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Coincident',-1,1,0,1))
App.ActiveDocument.recompute()
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Vertical',0))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(Part.Line(App.Vector(p2x,p2y,0),App.Vector(p3x,p3y,0)))
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Coincident',0,2,1,1))
App.ActiveDocument.recompute()
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Vertical',1))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(Part.Line(App.Vector(p3x,p3y,0),App.Vector(p4x,p4y,0)))
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Coincident',1,2,2,1))
App.ActiveDocument.recompute()
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Vertical',2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(Part.Line(App.Vector(p4x,p4y,0),App.Vector(p5x,p5y,0)))
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Coincident',2,2,3,1))
App.ActiveDocument.recompute()
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Vertical',3))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(Part.Line(App.Vector(p5x,p5y,0),App.Vector(p6x,p6y,0)))
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Coincident',3,2,4,1))
App.ActiveDocument.recompute()
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('PointOnObject',4,2,-3))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Vertical',4))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Equal',1,3))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Equal',4,0))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.toggleConstruction(0)
App.ActiveDocument.Sketch001.toggleConstruction(1)
App.ActiveDocument.Sketch001.toggleConstruction(2)
App.ActiveDocument.Sketch001.toggleConstruction(3)
App.ActiveDocument.Sketch001.toggleConstruction(4)
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(Part.Circle(App.Vector(p2x,p2y,0),App.Vector(0,0,1),gv.mountToFrameDia/2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Coincident',5,3,0,2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(Part.Circle(App.Vector(p3x,p3y,0),App.Vector(0,0,1),gv.mountToFrameDia/2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Coincident',6,3,1,2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(Part.Circle(App.Vector(p4x,p4y,0),App.Vector(0,0,1),gv.mountToFrameDia/2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Coincident',7,3,2,2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(Part.Circle(App.Vector(p5x,p5y,0),App.Vector(0,0,1),gv.mountToFrameDia/2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Coincident',8,3,3,2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Equal',8,7))
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Equal',7,6))
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Equal',6,5))
App.ActiveDocument.recompute()
#Add Dimensions
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('Radius',8,gv.mountToFrameDia/2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('DistanceY',3,gv.zMotorMountPlateWidth/2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(Sketcher.Constraint('DistanceY',4,p2y))
App.ActiveDocument.recompute()
# Gui.getDocument(self.name).resetEdit()
App.getDocument(self.name).recompute()
#Cut holes through All
App.activeDocument().addObject("PartDesign::Pocket","Pocket")
App.activeDocument().Pocket.Sketch = App.activeDocument().Sketch001
App.activeDocument().Pocket.Length = 5.0
App.ActiveDocument.recompute()
Gui.activeDocument().hide("Sketch001")
Gui.activeDocument().hide("Pad")
# Gui.ActiveDocument.Pocket.ShapeColor=Gui.ActiveDocument.Pad.ShapeColor
# Gui.ActiveDocument.Pocket.LineColor=Gui.ActiveDocument.Pad.LineColor
# Gui.ActiveDocument.Pocket.PointColor=Gui.ActiveDocument.Pad.PointColor
App.ActiveDocument.Pocket.Length = 5.000000
App.ActiveDocument.Pocket.Type = 1
App.ActiveDocument.Pocket.UpToFace = None
App.ActiveDocument.recompute()
def Activated(self):
try:
s = Gui.Selection.getSelectionEx()
if (len(s) < 1):
# An object must be selected
errMessage = "Select an object to use Extrude Face"
faced.getInfo(s).errorDialog(errMessage)
return
lengthForward = QtGui.QInputDialog.getDouble(
None, "Get value", "Input:", 0, -10000.0, 10000.0, 2)[0]
if(lengthForward == 0):
return # nothing to do here
objName = s[0].ObjectName
sh = s[0].Object.Shape.copy()
if hasattr(s[0].Object, "getGlobalPlacement"):
gpl = s[0].Object.getGlobalPlacement()
sh.Placement = gpl
name = s[0].SubElementNames[0]
fullname = objName+"_"+name # Name of the face extracted
newobj = s[0].Document.addObject("Part::Feature", fullname)
newobj.Shape = sh.getElement(name)
selection = newobj # The face extraced
activeSel = Gui.Selection.getSelection(App.ActiveDocument.Name)
Gui.Selection.removeSelection(activeSel[0])
# Select the face extracted before
Gui.Selection.addSelection(selection)
App.ActiveDocument.recompute()
m = App.activeDocument().getObject(fullname)
f = App.activeDocument().addObject(
'Part::Extrusion', 'ExtrudeFace') # Add extrusion
f.Base = newobj # App.activeDocument().getObject(fullname)
f.DirMode = "Normal"
f.DirLink = None
f.LengthFwd = lengthForward
f.LengthRev = 0.0
f.Solid = True
f.Reversed = False
f.Symmetric = False
f.TaperAngle = 0.0
f.TaperAngleRev = 0.0
App.ActiveDocument.recompute()
newPart_ = App.ActiveDocument.addObject(
'Part::Feature', f.Name+'N')
newPart_.Shape = Part.getShape(
f, '', needSubElement=False, refine=False)
if newPart_.isValid() == False:
App.ActiveDocument.removeObject(newPart_.Name)
App.ActiveDocument.removeObject(f.Name)
# Shape is not OK
errMessage = "Failed to extrude the Face"
faced.getInfo(m).errorDialog(errMessage)
else:
# remove old objects
App.ActiveDocument.removeObject(f.Name)
App.ActiveDocument.removeObject(m.Name)
# This will not work for split objects as they are not two separate objects.2021-02-22
# Make the two objects merged
obj1 = App.ActiveDocument.getObject(s[0].ObjectName)
obj2 = newPart_
selections = Gui.Selection.getSelectionEx()
for i in selections:
Gui.Selection.removeSelection(selections)
Gui.Selection.addSelection(obj1)
Gui.Selection.addSelection(obj2)
Gui.runCommand('Design456_Part_Merge', 0)
App.ActiveDocument.recompute()
return
except Exception as err:
App.Console.PrintError("'ExtrudeFace' Failed. "
"{err}\n".format(err=str(err)))
exc_type, exc_obj, exc_tb = sys.exc_info()
fname = os.path.split(exc_tb.tb_frame.f_code.co_filename)[1]
print(exc_type, fname, exc_tb.tb_lineno)
def TestElbow():
document = FreeCAD.activeDocument()
elbow = Elbow(document)
elbow.create(False)
document.recompute()
def Activated(self):
import pCmd
FreeCAD.activeDocument().openTransaction('Attach to tube')
pCmd.attachToTube()
FreeCAD.activeDocument().recompute()
FreeCAD.activeDocument().commitTransaction()
def makeBentShapeRebar(
f_cover,
b_cover,
l_cover,
r_cover,
diameter,
t_cover,
bentLength,
bentAngle,
rounding,
amount_spacing_check,
amount_spacing_value,
orientation="Bottom",
structure=None,
facename=None,
):
"""makeBentShapeRebar(FrontCover, BottomCover, LeftCover, RightCover,
Diameter, TopCover, BentLength, BentAngle, Rounding, AmountSpacingCheck,
AmountSpacingValue, Orientation, Structure, Facename):
Adds the Bent-Shape reinforcement bar to the selected structural object.
It takes four different orientations input i.e. 'Bottom', 'Top', 'Left',
'Right'.
"""
if not structure and not facename:
selected_obj = FreeCADGui.Selection.getSelectionEx()[0]
structure = selected_obj.Object
facename = selected_obj.SubElementNames[0]
face = structure.Shape.Faces[getFaceNumber(facename) - 1]
# StructurePRM = getTrueParametersOfStructure(structure)
FacePRM = getParametersOfFace(structure, facename)
if not FacePRM:
FreeCAD.Console.PrintError(
"Cannot identify shape or from which base object structural "
"element is derived\n")
return
# Get points of L-Shape rebar
points = getpointsOfBentShapeRebar(
FacePRM,
l_cover,
r_cover,
b_cover,
t_cover,
bentLength,
bentAngle,
orientation,
diameter,
facenormalDirection(structure, facename),
)
import Part
import Arch
sketch = FreeCAD.activeDocument().addObject("Sketcher::SketchObject",
"Sketch")
sketch.MapMode = "FlatFace"
sketch.Support = [(structure, facename)]
FreeCAD.ActiveDocument.recompute()
sketch.addGeometry(Part.LineSegment(points[0], points[1]), False)
sketch.addGeometry(Part.LineSegment(points[1], points[2]), False)
sketch.addGeometry(Part.LineSegment(points[2], points[3]), False)
sketch.addGeometry(Part.LineSegment(points[3], points[4]), False)
sketch.addGeometry(Part.LineSegment(points[4], points[5]), False)
if amount_spacing_check:
rebar = Arch.makeRebar(
structure,
sketch,
diameter,
amount_spacing_value,
f_cover + diameter / 2,
name="BentShapeRebar",
)
FreeCAD.ActiveDocument.recompute()
else:
size = (ArchCommands.projectToVector(structure.Shape.copy(),
face.normalAt(0, 0))).Length
rebar = Arch.makeRebar(
structure,
sketch,
diameter,
get_rebar_amount_from_spacing(size, diameter,
amount_spacing_value),
f_cover + diameter / 2,
name="BentShapeRebar",
)
rebar.Rounding = rounding
# Adds properties to the rebar object
rebar.addProperty(
"App::PropertyEnumeration",
"RebarShape",
"RebarDialog",
QT_TRANSLATE_NOOP("App::Property", "Shape of rebar"),
).RebarShape = RebarTypes.tolist()
rebar.RebarShape = "BentShapeRebar"
rebar.setEditorMode("RebarShape", 2)
rebar.addProperty(
"App::PropertyDistance",
"FrontCover",
"RebarDialog",
QT_TRANSLATE_NOOP("App::Property", "Front cover of rebar"),
).FrontCover = f_cover
rebar.setEditorMode("FrontCover", 2)
rebar.addProperty(
"App::PropertyDistance",
"LeftCover",
"RebarDialog",
QT_TRANSLATE_NOOP("App::Property", "Left Side cover of rebar"),
).LeftCover = l_cover
rebar.setEditorMode("LeftCover", 2)
rebar.addProperty(
"App::PropertyDistance",
"RightCover",
"RebarDialog",
QT_TRANSLATE_NOOP("App::Property", "Right Side cover of rebar"),
).RightCover = r_cover
rebar.setEditorMode("RightCover", 2)
rebar.addProperty(
"App::PropertyDistance",
"BottomCover",
"RebarDialog",
QT_TRANSLATE_NOOP("App::Property", "Bottom cover of rebar"),
).BottomCover = b_cover
rebar.setEditorMode("BottomCover", 2)
rebar.addProperty(
"App::PropertyBool",
"AmountCheck",
"RebarDialog",
QT_TRANSLATE_NOOP("App::Property", "Amount radio button is checked"),
)
rebar.setEditorMode("AmountCheck", 2)
rebar.addProperty(
"App::PropertyDistance",
"TopCover",
"RebarDialog",
QT_TRANSLATE_NOOP("App::Property", "Top cover of rebar"),
).TopCover = t_cover
rebar.setEditorMode("TopCover", 2)
rebar.addProperty(
"App::PropertyDistance",
"TrueSpacing",
"RebarDialog",
QT_TRANSLATE_NOOP("App::Property", "Spacing between of rebars"),
).TrueSpacing = amount_spacing_value
rebar.addProperty(
"App::PropertyString",
"Orientation",
"RebarDialog",
QT_TRANSLATE_NOOP("App::Property", "Shape of rebar"),
).Orientation = orientation
rebar.setEditorMode("Orientation", 2)
rebar.setEditorMode("TrueSpacing", 2)
rebar.addProperty(
"App::PropertyDistance",
"BentLength",
"RebarDialog",
QT_TRANSLATE_NOOP("App::Property", "BentLength cover of rebar"),
).BentLength = bentLength
rebar.setEditorMode("BentLength", 2)
rebar.addProperty(
"App::PropertyDistance",
"BentAngle",
"RebarDialog",
QT_TRANSLATE_NOOP("App::Property", "Bent Angle of rebar"),
).BentAngle = bentAngle
rebar.setEditorMode("BentAngle", 2)
if amount_spacing_check:
rebar.AmountCheck = True
else:
rebar.AmountCheck = False
rebar.TrueSpacing = amount_spacing_value
FreeCAD.ActiveDocument.recompute()
return rebar
def Activated(self):
import pCmd
FreeCAD.activeDocument().openTransaction('Mate')
pCmd.alignTheTube()
FreeCAD.activeDocument().commitTransaction()
FreeCAD.activeDocument().recompute()
def draw(self):
#helper Variables
#determine total width of motor mount plate
xMotorMountWidth = gv.xMotorBodyWidth + gv.motorToXRodClampSpacing + gv.xRodClampWidth
xRodClampMountHoleSpacingVert = gv.xRodSpacing - 2 * gv.xRodAxisToMountHoleDist
xRodClampMountHoleSpacingHoriz = gv.xRodClampWidth - 2 * gv.xRodClampEdgeToMountHoleDist
#safety check
#xRodSpacing must be wide enough for the motor to be mounted between the rods
#Create Document
try:
App.getDocument('xEndMotorPlate').recompute()
App.closeDocument("xEndMotorPlate")
App.setActiveDocument("")
App.ActiveDocument = None
except:
pass
App.newDocument("xEndMotorPlate")
App.setActiveDocument("xEndMotorPlate")
App.ActiveDocument = App.getDocument("xEndMotorPlate")
#Make the plate
#Sketch points
p1x = 0
p1y = 0
p2x = 0
p2y = gv.xMotorMountPlateWidth
p3x = xMotorMountWidth
p3y = gv.xMotorMountPlateWidth
p4x = xMotorMountWidth
p4y = 0
#Make Sketch
App.activeDocument().addObject('Sketcher::SketchObject', 'Sketch')
App.activeDocument().Sketch.Placement = App.Placement(
App.Vector(0.000000, 0.000000, 0.000000),
App.Rotation(0.000000, 0.000000, 0.000000, 1.000000))
App.ActiveDocument.Sketch.addGeometry(
Part.Line(App.Vector(p1x, p1y, 0), App.Vector(p2x, p2y, 0)))
App.ActiveDocument.Sketch.addGeometry(
Part.Line(App.Vector(p2x, p2y, 0), App.Vector(p3x, p3y, 0)))
App.ActiveDocument.Sketch.addGeometry(
Part.Line(App.Vector(p3x, p3y, 0), App.Vector(p4x, p4y, 0)))
App.ActiveDocument.Sketch.addGeometry(
Part.Line(App.Vector(p4x, p4y, 0), App.Vector(p1x, p1y, 0)))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 0, 2, 1, 1))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 1, 2, 2, 1))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 2, 2, 3, 1))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 3, 2, 0, 1))
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Vertical', 0))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Vertical', 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Horizontal', 3))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Horizontal', 1))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('Coincident', 0, 1, -1, 1))
App.ActiveDocument.recompute()
#Add dimensions
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('DistanceX', 3, -xMotorMountWidth))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch.addConstraint(
Sketcher.Constraint('DistanceY', 2, -gv.xMotorMountPlateWidth))
App.ActiveDocument.recompute()
App.getDocument('xEndMotorPlate').recompute()
#extrude x motor mount plate
App.activeDocument().addObject("PartDesign::Pad", "Pad")
App.activeDocument().Pad.Sketch = App.activeDocument().Sketch
App.activeDocument().Pad.Length = 10.0
App.ActiveDocument.recompute()
App.ActiveDocument.Pad.Length = gv.xMotorMountPlateThickness
App.ActiveDocument.Pad.Reversed = 0
App.ActiveDocument.Pad.Midplane = 0
App.ActiveDocument.Pad.Length2 = 100.000000
App.ActiveDocument.Pad.Type = 0
App.ActiveDocument.Pad.UpToFace = None
App.ActiveDocument.recompute()
#cut holes for xRodClamp
#Sketch Points
p1x = 0
p1y = gv.xMotorMountPlateWidth / 2
p2x = xMotorMountWidth
p2y = gv.xMotorMountPlateWidth / 2
p3x = gv.xMotorBodyWidth + gv.motorToXRodClampSpacing + gv.xRodClampEdgeToMountHoleDist
p3y = gv.xRodAxisToMountHoleDist
p4x = gv.xMotorBodyWidth + gv.motorToXRodClampSpacing + gv.xRodClampEdgeToMountHoleDist
p4y = gv.xMotorMountPlateWidth - gv.xRodAxisToMountHoleDist
p5x = xMotorMountWidth - gv.xRodClampEdgeToMountHoleDist
p5y = gv.xMotorMountPlateWidth - gv.xRodAxisToMountHoleDist
p6x = xMotorMountWidth - gv.xRodClampEdgeToMountHoleDist
p6y = gv.xRodAxisToMountHoleDist
p7x = gv.xMotorBodyWidth + gv.motorToXRodClampSpacing + gv.xRodClampEdgeToMountHoleDist
p7y = gv.xMotorMountPlateWidth / 2
p8x = gv.xMotorBodyWidth + gv.motorToXRodClampSpacing + gv.xRodClampWidth / 2
p8y = gv.xMotorMountPlateWidth / 2
#Make sketch
App.activeDocument().addObject('Sketcher::SketchObject', 'Sketch001')
App.activeDocument().Sketch001.Support = uf.getFace(
App.ActiveDocument.Pad, None, None, None, None,
gv.xMotorMountPlateThickness,
0) #(App.ActiveDocument.Pad,["Face6"])
App.activeDocument().recompute()
App.ActiveDocument.Sketch001.addExternal(
"Pad",
uf.getEdge(App.ActiveDocument.Pad, 0, 0,
gv.xMotorMountPlateWidth / 2, 0,
gv.xMotorMountPlateThickness, 0))
App.ActiveDocument.Sketch001.addExternal(
"Pad",
uf.getEdge(App.ActiveDocument.Pad, xMotorMountWidth, 0,
gv.xMotorMountPlateWidth / 2, 0,
gv.xMotorMountPlateThickness, 0))
App.ActiveDocument.Sketch001.addGeometry(
Part.Line(App.Vector(p1x, p1y, 0), App.Vector(p2x, p2y, 0)))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('PointOnObject', 0, 1, -3))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('PointOnObject', 0, 2, -4))
App.ActiveDocument.Sketch001.addGeometry(
Part.Line(App.Vector(p3x, p3y, 0), App.Vector(p4x, p4y, 0)))
App.ActiveDocument.Sketch001.addGeometry(
Part.Line(App.Vector(p4x, p4y, 0), App.Vector(p5x, p5y, 0)))
App.ActiveDocument.Sketch001.addGeometry(
Part.Line(App.Vector(p5x, p5y, 0), App.Vector(p6x, p6y, 0)))
App.ActiveDocument.Sketch001.addGeometry(
Part.Line(App.Vector(p6x, p6y, 0), App.Vector(p3x, p3y, 0)))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Coincident', 1, 2, 2, 1))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Coincident', 2, 2, 3, 1))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Coincident', 3, 2, 4, 1))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Coincident', 4, 2, 1, 1))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Horizontal', 2))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Horizontal', 4))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Vertical', 1))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Vertical', 3))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.toggleConstruction(0)
App.ActiveDocument.Sketch001.toggleConstruction(4)
App.ActiveDocument.Sketch001.toggleConstruction(3)
App.ActiveDocument.Sketch001.toggleConstruction(2)
App.ActiveDocument.Sketch001.toggleConstruction(1)
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(
Part.Point(App.Vector(p7x, p7y, 0)))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('PointOnObject', 5, 1, 1))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('PointOnObject', 5, 1, 0))
App.ActiveDocument.Sketch001.addGeometry(
Part.Circle(App.Vector(p3x, p3y, 0), App.Vector(0, 0, 1),
gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Coincident', 1, 1, 6, 3))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(
Part.Circle(App.Vector(p4x, p4y, 0), App.Vector(0, 0, 1),
gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Coincident', 7, 3, 1, 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(
Part.Circle(App.Vector(p5x, p5y, 0), App.Vector(0, 0, 1),
gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Coincident', 2, 2, 8, 3))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(
Part.Circle(App.Vector(p6x, p6y, 0), App.Vector(0, 0, 1),
gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Coincident', 9, 3, 3, 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Equal', 6, 7))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Equal', 7, 8))
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Equal', 8, 9))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addGeometry(
Part.Circle(App.Vector(p8x, p8y, 0), App.Vector(0, 0, 1),
gv.xEndIdlerHoleDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('PointOnObject', 10, 3, 0))
App.ActiveDocument.recompute()
#add dimensions
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('DistanceX', 4,
-xRodClampMountHoleSpacingHoriz))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Distance', 3, 2, -4,
gv.xRodClampEdgeToMountHoleDist))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('DistanceY', 3,
-xRodClampMountHoleSpacingVert))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Radius', 8, gv.mountToPrintedDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Radius', 10, gv.xEndIdlerHoleDia / 2))
App.ActiveDocument.recompute()
#add Symmetric constraints
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Symmetric', 1, 1, 1, 2, 5, 1))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Symmetric', 1, 1, 2, 2, 10, 3))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch001.addConstraint(
Sketcher.Constraint('Symmetric', -1, 1, -3, 2, 0, 1))
App.ActiveDocument.recompute()
#exit sketch
App.getDocument('xEndMotorPlate').recompute()
#Cut holes through all
App.activeDocument().addObject("PartDesign::Pocket", "Pocket")
App.activeDocument().Pocket.Sketch = App.activeDocument().Sketch001
App.activeDocument().Pocket.Length = 5.0
App.ActiveDocument.recompute()
App.ActiveDocument.Pocket.Length = 5.000000
App.ActiveDocument.Pocket.Type = 1
App.ActiveDocument.Pocket.UpToFace = None
App.ActiveDocument.recompute()
#Cut holes for motor
#Sketch Points
p1x = 0
p1y = gv.xMotorMountPlateWidth / 2
p2x = xMotorMountWidth
p2y = gv.xMotorMountPlateWidth / 2
p3x = gv.xEndMotorMountHoleDia / 2 + gv.xEndMotorMountHolePadding
p3y = gv.xMotorMountPlateWidth / 2 - gv.xMotorShaftToMountHoleDistX
p4x = gv.xEndMotorMountHoleDia / 2 + gv.xEndMotorMountHolePadding
p4y = gv.xMotorMountPlateWidth / 2 + gv.xMotorShaftToMountHoleDistX
p5x = gv.xEndMotorMountHoleDia / 2 + gv.xEndMotorMountHolePadding + 2 * gv.xMotorShaftToMountHoleDistX
p5y = gv.xMotorMountPlateWidth / 2 + gv.xMotorShaftToMountHoleDistX
p6x = gv.xEndMotorMountHoleDia / 2 + gv.xEndMotorMountHolePadding + 2 * gv.xMotorShaftToMountHoleDistX
p6y = gv.xMotorMountPlateWidth / 2 - gv.xMotorShaftToMountHoleDistX
p7x = gv.xEndMotorMountHoleDia / 2 + gv.xEndMotorMountHolePadding
p7y = gv.xMotorMountPlateWidth / 2
p8x = gv.xMotorBodyWidth / 2
p8y = gv.xMotorMountPlateWidth / 2
#Make Sketch
App.activeDocument().addObject('Sketcher::SketchObject', 'Sketch002')
App.activeDocument().Sketch002.Support = uf.getFace(
App.ActiveDocument.Pocket, None, None, None, None,
gv.xMotorMountPlateThickness,
0) #(App.ActiveDocument.Pocket,["Face5"])
App.activeDocument().recompute()
App.ActiveDocument.Sketch002.addExternal(
"Pocket",
uf.getEdge(App.ActiveDocument.Pocket, 0, 0,
gv.xMotorMountPlateWidth / 2, 0,
gv.xMotorMountPlateThickness, 0))
App.ActiveDocument.Sketch002.addExternal(
"Pocket",
uf.getEdge(App.ActiveDocument.Pocket, xMotorMountWidth, 0,
gv.xMotorMountPlateWidth / 2, 0,
gv.xMotorMountPlateThickness, 0))
App.ActiveDocument.Sketch002.addGeometry(
Part.Line(App.Vector(p1x, p1y, 0), App.Vector(p2x, p2y, 0)))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('PointOnObject', 0, 2, -4))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Symmetric', -1, 1, -3, 2, 0, 1))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Horizontal', 0))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addGeometry(
Part.Line(App.Vector(p3x, p3y, 0), App.Vector(p4x, p4y, 0)))
App.ActiveDocument.Sketch002.addGeometry(
Part.Line(App.Vector(p4x, p4y, 0), App.Vector(p5x, p5y, 0)))
App.ActiveDocument.Sketch002.addGeometry(
Part.Line(App.Vector(p5x, p5y, 0), App.Vector(p6x, p6y, 0)))
App.ActiveDocument.Sketch002.addGeometry(
Part.Line(App.Vector(p6x, p6y, 0), App.Vector(p3x, p3y, 0)))
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Coincident', 1, 2, 2, 1))
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Coincident', 2, 2, 3, 1))
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Coincident', 3, 2, 4, 1))
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Coincident', 4, 2, 1, 1))
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Horizontal', 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Horizontal', 4))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Vertical', 3))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Vertical', 1))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Equal', 3, 4))
App.ActiveDocument.recompute()
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.toggleConstruction(0)
App.ActiveDocument.Sketch002.toggleConstruction(2)
App.ActiveDocument.Sketch002.toggleConstruction(3)
App.ActiveDocument.Sketch002.toggleConstruction(4)
App.ActiveDocument.Sketch002.toggleConstruction(1)
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addGeometry(
Part.Point(App.Vector(p7x, p7y, 0)))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('PointOnObject', 5, 1, 0))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('PointOnObject', 5, 1, 1))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint(
'Distance', 1, 1, -3,
gv.xEndMotorMountHoleDia / 2 + gv.xEndMotorMountHolePadding))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('DistanceX', 4,
-2 * gv.xMotorShaftToMountHoleDistX))
App.ActiveDocument.Sketch002.addGeometry(
Part.Circle(App.Vector(p3x, p3y, 0), App.Vector(0, 0, 1),
gv.xEndMotorMountHoleDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Coincident', 6, 3, 1, 1))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addGeometry(
Part.Circle(App.Vector(p5x, p5y, 0), App.Vector(0, 0, 1),
gv.xEndMotorMountHoleDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Coincident', 7, 3, 2, 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addGeometry(
Part.Circle(App.Vector(p8x, p8y, 0), App.Vector(0, 0, 1),
gv.xMotorPulleyDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('PointOnObject', 8, 3, 0))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Equal', 6, 7))
App.ActiveDocument.recompute()
#Add dimensions to holes
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Radius', 6, gv.xEndMotorMountHoleDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Radius', 8, gv.xMotorPulleyDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Symmetric', 1, 1, 2, 2, 8, 3))
App.ActiveDocument.recompute()
#Cut 2 more holes if there are 4 motor mount holes
if gv.xEndNumMountHoles == 4:
App.ActiveDocument.Sketch002.addGeometry(
Part.Circle(App.Vector(p4x, p4y, 0), App.Vector(0, 0, 1),
gv.xEndMotorMountHoleDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Coincident', 9, 3, 1, 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addGeometry(
Part.Circle(App.Vector(p6x, p6y, 0), App.Vector(0, 0, 1),
gv.xEndMotorMountHoleDia / 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Coincident', 10, 3, 3, 2))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Equal', 10, 9))
App.ActiveDocument.recompute()
App.ActiveDocument.Sketch002.addConstraint(
Sketcher.Constraint('Equal', 10, 7))
#exit Sketch
App.getDocument('xEndMotorPlate').recompute()
#Cut holes
App.activeDocument().addObject("PartDesign::Pocket", "Pocket001")
App.activeDocument().Pocket001.Sketch = App.activeDocument().Sketch002
App.activeDocument().Pocket001.Length = 5.0
App.ActiveDocument.recompute()
App.ActiveDocument.Pocket001.Length = 5.000000
App.ActiveDocument.Pocket001.Type = 1
App.ActiveDocument.Pocket001.UpToFace = None
App.ActiveDocument.recompute()
def Activated(self):
import pCmd
FreeCAD.activeDocument().openTransaction('Xtend1int')
pCmd.extendTheTubes2intersection(both=False)
FreeCAD.activeDocument().recompute()
FreeCAD.activeDocument().commitTransaction()
import os
import sys
sys.path.append(os.path.dirname(__file__))
from SectionList import *
from Case import *
if __name__ == '__main__':
if not App.listDocuments().has_key("BananaPiM64Model"):
App.open(
"/home/heller/BananaPi_M64_Portable/3DModel/BananaPiM64Model.fcstd"
)
App.setActiveDocument("BananaPiM64Model")
App.ActiveDocument = App.getDocument("BananaPiM64Model")
doc = App.activeDocument()
garbage = doc.findObjects('Drawing::FeatureViewPart')
for g in garbage:
doc.removeObject(g.Name)
garbage = doc.findObjects('Drawing::FeaturePage')
for g in garbage:
doc.removeObject(g.Name)
#############
##
## Top Block: hinge
##
doc.addObject('Drawing::FeaturePage', 'TopBackBlockDrillSheetPage')
doc.TopBackBlockDrillSheetPage.Template = "/home/heller/BananaPi_M64_Portable/3DModel/Letter_Portrait_ISO7200.svg"
edt = doc.TopBackBlockDrillSheetPage.EditableTexts
edt[0] = unicode("Robert Heller")
edt[1] = unicode("Top Block Drill Sheet (back block hinge holes)")
FreeCAD.ActiveDocument.ActiveObject.Solid = True
FreeCAD.ActiveDocument.ActiveObject.Ruled = False
FreeCAD.ActiveDocument.ActiveObject.Closed = False
FreeCAD.ActiveDocument.recompute()
FreeCAD.ActiveDocument.addObject('Part::Loft', 'OUTER_WING_2_L')
FreeCAD.ActiveDocument.ActiveObject.Sections = [
FreeCAD.ActiveDocument.BSpline007, FreeCAD.ActiveDocument.BSpline008
]
FreeCAD.ActiveDocument.ActiveObject.Solid = True
FreeCAD.ActiveDocument.ActiveObject.Ruled = False
FreeCAD.ActiveDocument.ActiveObject.Closed = False
FreeCAD.ActiveDocument.recompute()
#centrebody fusion
FreeCAD.activeDocument().addObject("Part::MultiFuse", "CENTREBODY_FUSION_L")
FreeCAD.activeDocument().CENTREBODY_FUSION_L.Shapes = [
FreeCAD.activeDocument().CENTREBODY_2_L,
FreeCAD.activeDocument().CENTREBODY_1_L
]
FreeCAD.ActiveDocument.recompute()
##LEFT OUTER WING FUSION
#FreeCAD.activeDocument().addObject("Part::MultiFuse","LEFT_OUTER_WING_FUSION")
#FreeCAD.activeDocument().LEFT_OUTER_WING_FUSION.Shapes = [FreeCAD.activeDocument().LEFT_WINGLET,FreeCAD.activeDocument().OUTER_WING_2_L,FreeCAD.activeDocument().OUTER_WING_1_L]
#FreeCAD.ActiveDocument.recompute()
#
##LEFT WING + CENTREBODY FUSION
#FreeCAD.activeDocument().addObject("Part::MultiFuse","LEFT_WING_FUSION")
#FreeCAD.activeDocument().LEFT_WING_FUSION.Shapes = [FreeCAD.activeDocument().LEFT_OUTER_WING_FUSION,FreeCAD.activeDocument().CENTREBODY_FUSION_L]
#FreeCAD.ActiveDocument.recompute()
def methodA(self, obj):
print "my Method A"
FreeCAD.activeDocument().recompute()
def export_one_part(modul, variant, with_plug=False):
if not variant in modul.all_params:
FreeCAD.Console.PrintMessage("Parameters for %s doesn't exist in 'M.all_params', skipping." % variant)
return
destination_dir="Connectors_Phoenix.3dshapes"
if with_plug:
destination_dir="Connectors_Phoenix__with_plug.3dshapes"
ModelName = variant
ModelName = ModelName.replace(".","_")
FileName = modul.all_params[variant].file_name
Newdoc = FreeCAD.newDocument(ModelName)
App.setActiveDocument(ModelName)
App.ActiveDocument=App.getDocument(ModelName)
Gui.ActiveDocument=Gui.getDocument(ModelName)
#App.setActiveDocument(ModelName)
#Gui.ActiveDocument=Gui.getDocument(ModelName)
(pins, body, insert, mount_screw, plug, plug_screws) = modul.generate_part(variant, with_plug)
color_attr = body_color + (0,)
show(body, color_attr)
color_attr = pins_color + (0,)
show(pins, color_attr)
if insert is not None:
color_attr = insert_color + (0,)
show(insert, color_attr)
if mount_screw is not None:
color_attr = screw_color + (0,)
show(mount_screw, color_attr)
if plug is not None:
color_attr = body_color + (0,)
show(plug, color_attr)
color_attr = screw_color + (0,)
show(plug_screws, color_attr)
doc = FreeCAD.ActiveDocument
doc.Label=ModelName
objs=FreeCAD.ActiveDocument.Objects
FreeCAD.Console.PrintMessage(objs)
i=0
objs[i].Label = ModelName + "__body"
i+=1
objs[i].Label = ModelName + "__pins"
i+=1
if insert is not None:
objs[i].Label = ModelName + "__thread_insert"
i+=1
if mount_screw is not None:
objs[i].Label = ModelName + "__mount_screw"
i+=1
if plug is not None:
objs[i].Label = ModelName + "__plug"
i+=1
objs[i].Label = ModelName + "__plug_screws"
restore_Main_Tools()
out_dir=destination_dir
if not os.path.exists(out_dir):
os.makedirs(out_dir)
used_color_keys = [body_color_key, pins_color_key]
export_file_name=destination_dir+os.sep+FileName+'.wrl'
export_objects = []
i=0
export_objects.append(expVRML.exportObject(freecad_object = objs[i],
shape_color=body_color_key,
face_colors=None))
i+=1
export_objects.append(expVRML.exportObject(freecad_object = objs[i],
shape_color=pins_color_key,
face_colors=None))
i+=1
if insert is not None:
export_objects.append(expVRML.exportObject(freecad_object = objs[i],
shape_color=insert_color_key,
face_colors=None))
used_color_keys.append(insert_color_key)
i+=1
if mount_screw is not None:
export_objects.append(expVRML.exportObject(freecad_object = objs[i],
shape_color=screw_color_key,
face_colors=None))
used_color_keys.append(screw_color_key)
i+=1
if plug is not None:
export_objects.append(expVRML.exportObject(freecad_object = objs[i],
shape_color=body_color_key,
face_colors=None))
i+=1
export_objects.append(expVRML.exportObject(freecad_object = objs[i],
shape_color=screw_color_key,
face_colors=None))
scale=1/2.54
colored_meshes = expVRML.getColoredMesh(Gui, export_objects , scale)
expVRML.writeVRMLFile(colored_meshes, export_file_name, used_color_keys, LIST_license)
fusion = multiFuseObjs_wColors(FreeCAD, FreeCADGui,
ModelName, objs, keepOriginals=True)
exportSTEP(doc,FileName,out_dir,fusion)
L.addLicenseToStep(out_dir+'/', FileName+".step", LIST_license,\
STR_licAuthor, STR_licEmail, STR_licOrgSys, STR_licPreProc)
saveFCdoc(App, Gui, doc, FileName,out_dir)
FreeCAD.activeDocument().recompute()
# FreeCADGui.activateWorkbench("PartWorkbench")
FreeCADGui.SendMsgToActiveView("ViewFit")
FreeCADGui.activeDocument().activeView().viewAxometric()
def get_bbox(obj, debug=False):
"""Return a BoundBox from any object that has a Coin RootNode.
Normally the bounding box of an object can be taken
from its `Part::TopoShape`.
::
>>> print(obj.Shape.BoundBox)
However, for objects without a `Shape`, such as those
derived from `App::FeaturePython` like `Draft Text` and `Draft Dimension`,
the bounding box can be calculated from the `RootNode` of the viewprovider.
Parameters
----------
obj: App::DocumentObject
Any object that has a `ViewObject.RootNode`.
Returns
-------
Base::BoundBox
It returns a `BoundBox` object which has information like
minimum and maximum values of X, Y, and Z, as well as bounding box
center.
None
If there is a problem it will return `None`.
"""
_name = "get_bbox"
utils.print_header(_name, "Bounding box", debug=debug)
found, doc = utils.find_doc(App.activeDocument())
if not found:
_err(_tr("No active document. Aborting."))
return None
if isinstance(obj, str):
obj_str = obj
found, obj = utils.find_object(obj, doc)
if not found:
_msg("obj: {}".format(obj_str))
_err(_tr("Wrong input: object not in document."))
return None
if debug:
_msg("obj: {}".format(obj.Label))
if (not hasattr(obj, "ViewObject") or not obj.ViewObject
or not hasattr(obj.ViewObject, "RootNode")):
_err(_tr("Does not have 'ViewObject.RootNode'."))
# For Draft Dimensions
# node = obj.ViewObject.Proxy.node
node = obj.ViewObject.RootNode
view = Gui.ActiveDocument.ActiveView
region = view.getViewer().getSoRenderManager().getViewportRegion()
action = coin.SoGetBoundingBoxAction(region)
node.getBoundingBox(action)
bb = action.getBoundingBox()
# xlength, ylength, zlength = bb.getSize().getValue()
xmin, ymin, zmin = bb.getMin().getValue()
xmax, ymax, zmax = bb.getMax().getValue()
return App.BoundBox(xmin, ymin, zmin, xmax, ymax, zmax)
def TestTee():
document = FreeCAD.activeDocument()
tee = Tee(document)
tee.create(False)
document.recompute()
