def main():
USB1208LS=MCCDAQ()
USB1208LS.FlashLED(0)
USB1208LS.GetBoardName(0)
i=USB1208LS.getStatus()
print USB1208LS.GetErrMsg(i)
print USB1208LS.GetConfig(BOARDINFO,0,0,BISERIALNUM)
WConio.clrscr()
print "Demonstration of cbAOut() - chan0 pin13 - D/A 10bits"
ExitFlag = False
while (ExitFlag==False):
WConio.gotoxy (0, 3)
EngUnits = float ( raw_input('Enter a voltage between -5.0 and +5.0: ') )
DataValue=USB1208LS.FromEngUnits(0, BIP5VOLTS, EngUnits)
USB1208LS.AOut (0, 0 , BIP5VOLTS, DataValue)
print "%.2f volts has been sent to D/A 0.\n"\
"Press Q to quit , any other key to continue: " %EngUnits
(ch,)=WConio.getch()
if (ch=='q' or ch=='Q'): ExitFlag=True
def main():
WConio.clrscr()
print "Demonstration of GetConfig().\n"\
"List of Installed Boards:\n"
# Get the number of boards installed in system
NumBoards=USB1208LS.GetConfig (GLOBALINFO, 0, 0, GINUMBOARDS)
USB1208LS.SetConfig (BOARDINFO, 0, 0, BINUMADCHANS,8) # single ended
#USB1208LS.SetConfig (BOARDINFO, 0, 0, BINUMADCHANS,4) # diff ended
for i in range(NumBoards):
# Get board type of each board
BoardType=USB1208LS.GetConfig (BOARDINFO, i, 0, BIBOARDTYPE)
# If a board is installed
if (BoardType > 0):
# Get the board's name
BoardNameStr=USB1208LS.GetBoardName (i)
print " Board #%d = %s" %(i,BoardNameStr)
# Get the board's base address
BaseAdr=USB1208LS.GetConfig (BOARDINFO, i, 0, BIBASEADR)
print " Base Address = 0x%x" %BaseAdr
PrintADInfo (i)
PrintDAInfo (i)
PrintDigInfo (i)
PrintCtrInfo (i)
PrintExpInfo (i)
raw_input("\npause")
def robust_write(self, command = ''):
"""Write to the RCS with robust exception handling."""
try:
self.write(command)
except DisconnectError:
global servo_mode
servo_mode = IDLE
# Blank screen due to device disconnect.
WConio.textattr(0xb0)
WConio.clrscr()
WConio.gotoxy(10, 10)
WConio.cputs('USB-RCS has been disconnected during write. '
'Trying to reconnect. ')
self.robust_reconnect()
usb = rcs.robust_read('U')
firmware_version = usb[2]
display_once(firmware_version)
except Exception, e:
WConio.textattr(0xc0)
WConio.clrscr()
WConio.gotoxy(0, 10)
print "Unexpected exception in robust_write: ", type(e)
print
print e
print
raw_input("Press enter to exit ->")
exit()
def display_once(firmware_version):
"""Display static information, call once."""
WConio.textattr(0x70)
WConio.clrscr()
# Display Firmware Version or Firmware Status.
WConio.gotoxy(2, 0)
if firmware_version < 1.0:
WConio.textattr(0xc0)
WConio.cputs(' Firmware Unreliable! ')
else:
WConio.textattr(0xa0)
WConio.cputs(' Firmware Version %2.2f '%firmware_version)
# Display servo static labels.
WConio.gotoxy(0, 2)
WConio.textattr(0x70)
WConio.cputs(' S# Acc #Q Cyc Speed Pos mS\n')
for i in range(1, 17):
WConio.cputs(' %2i\n'%i)
# Display analog channel labels.
WConio.gotoxy(0, 20)
WConio.textattr(0x70)
WConio.cputs (' C# Voltage C# Voltage')
for i in range(1, 5):
WConio.cputs('\n %i %i'%
(i, i+4))
def main():
USB1208LS=MCCDAQ()
WConio.clrscr()
print "Demonstration of cbDIn()\n"\
"Press any key to quit.\n\n"\
"You may change a bit by applying a TTL high or\n"\
"a TTL low to the corresponding pin# on port A.\n"
print "The first 7 bits are: pin32 to pin 39\n"\
"0 1 2 3 4 5 6 7\n "
(a,a,a,a,a,a,a,a,a,a,row)=WConio.gettextinfo()
USB1208LS.DConfigPort (0, FIRSTPORTB, DIGITALIN)
while (WConio.kbhit()==False):
DataValue=USB1208LS.DIn(0, FIRSTPORTB)
WConio.gotoxy(0,row)
print "Port Value: %d " %DataValue
# parse DataValue into bit values to indicate on/off status */
for I in range (8):
if (DataValue & 2**I): BitValue = 1
else: BitValue = 0
print "%d " %BitValue,
def makeArray(size): WConio.clrscr() gameArray=None gameArray=[[chr(250) for y in range(size[1])] for x in range(size[0])] printGrid(gameArray) printBoard(gameArray) return gameArray
def play(self):
repeats = 0
lastclick = None
while True:
#self.find_diamond()
items = self.find_one()
if items:
self.click(items)
#print "clicked", items
if items == lastclick:
repeats += 1
else:
lastclick = items
#time.sleep(0.1)
#os.system('cls')
WConio.clrscr()
print '\n'.join([' '.join(x) for x in self.get_matrix()])
# else:
# #time.sleep(0.5)
# self.click(self.buffer[0])
# print "Clicked from buffer", self.buffer[0]
# self.buffer.remove(self.buffer[0])
# time.sleep(0.1)
# #print "Waiting..."
# # fails += 1
if repeats >= 5:
return "Finished!"
def ClearScreen():
# Clears the screen and moves the cursor to the upper left corner
if gOS == "Windows":
WConio.clrscr()
elif gOS == "Linux":
gConsole.erase()
gConsole.move(0, 0)
def ClearScreen():
# Clears the screen and moves the cursor to the upper left corner
if gOS == "Windows":
WConio.clrscr()
elif gOS == "Linux":
gConsole.erase()
gConsole.move(0, 0)
def printAsciiArt(): # Imprime el arte ascii de la introducción
WConio.clrscr() # limpio la pantalla previa
try:
(width, height) = getTerminalSize() # se obtiene el largo de la consola para dejarlo centrado
asciiart = open("data/documents/ascii.txt", "r")
for i in asciiart: print " "*(int((width - 26) / 2) - 10), i.rstrip()
asciiart.close()
except: pass
def clrscr():
"""
Limpia la pantalla
:return: void
"""
# noinspection PyBroadException
try:
WConio.clrscr()
except:
pass
def selectBoard(arrows):
WConio.clrscr()
k=None
comment = None
size=[5,5]
gameArray=makeArray(size)
WConio.gotoxy(0,21)
print "{0:^79}".format("Hit the spacebar to accept this board.")
while k<>" ":
k = WConio.getkey()
if k in arrows[0]:
d=arrows[0].index(k)
size[0]=(size[0]+arrows[1][d]*2)
size[1]=(size[1]+arrows[2][d]*2)
if size[0]>21:
size[0]=21
comment = "That's as wide as you can go."
elif size[0]<5:
size[0]=5
comment = "That's as narrow as you can go."
elif size[1]>9:
size[1]=9
comment = "That's as tall as you can go."
elif size[1]<5:
size[1]=5
comment = "That's as short as you can go."
else:
comment = ""
gameArray=makeArray(size)
WConio.gotoxy(0,21)
print "{0:^79}".format("{} {}".format(size,comment))
if size[0]*size[1]>50:
print "{0:^79}".format("This size board will get some random tokens thrown on.")
print "{0:^79}".format(" Hit the spacebar to accept this board.")
#init pieces
gameArray[0][0]=chr(1)
gameArray[0][len(gameArray[0])-1]=chr(2)
gameArray[len(gameArray)-1][0]=chr(2)
gameArray[len(gameArray)-1][len(gameArray[0])-1]=chr(1)
if len(gameArray)*len(gameArray[0])>50:
c=0
WConio.gotoxy(0,21)
while c< len(gameArray)*len(gameArray[0])-40:
m=randint(0,len(gameArray)-1)
n=randint(0,len(gameArray[0])-1)
p=randint(0,len(gameArray)-1)
q=randint(0,len(gameArray[0])-1)
if gameArray[m][n]==chr(250) and gameArray[p][q]==chr(250) and m<>p:
gameArray[m][n]=chr(1)
gameArray[p][q]=chr(2)
c=c+2
clearLines()
return (gameArray)
def clrscr():
"""
Limpia la pantalla.
:return: void
:rtype: None
"""
if _IMPORTED[0]:
try:
WConio.clrscr() # @UndefinedVariable
except:
pass
else:
if not is_windows():
os.system("clear")
def printAsciiArtServer():
"""
Imprime el arte ascii de la introducción del servidor
:return: void
"""
if _wconio:
WConio.clrscr()
try:
# se obtiene el largo de la consola para dejarlo centrado
(width, height) = getTerminalSize()
asciiart = open("data/doc/other/asciiartserver.txt", "r")
for i in asciiart:
print " " * (int((width - 26) / 2) - 1), i.rstrip()
asciiart.close()
except:
pass
def __draw(self):
WConio.clrscr()
# make walls
for i in xrange(len(self.__walls)):
self.__walls[i].draw()
self.__worldInfo.player.draw((1,1))
for z in self.__worldInfo.zombies:
z.draw((1,1))
for h in self.__worldInfo.healthPacks:
h.draw((1,1))
self.__drawHUD()
WConio.gotoxy(0,self.__size[1] + 2)
def printAsciiArtServer():
"""
Imprime el arte ascii de la introducción del servidor
:return: void
"""
if _wconio:
WConio.clrscr()
try:
# se obtiene el largo de la consola para dejarlo centrado
(width, height) = getTerminalSize() # @UnusedVariable
asciiart = open("data/doc/other/asciiartserver.txt", "r")
for i in asciiart:
print " " * (int((width - 26) / 2) - 1), i.rstrip()
asciiart.close()
except:
pass
def main():
USB1208LS=MCCDAQ()
WConio.clrscr()
print "Demonstration of voltage conversions.\n"\
"Press any key to quit.\n"
# get the A/D channel to sample
Chan = int ( raw_input('Enter the channel to display: ') )
print "\n\nNote: Please make certain that the board you are using supports\n"\
" the gain you are choosing and if it is not a programmable\n"\
" gain that the switches on the board are set correctly.\n\n"
BoardNum = 0
Gain = BIPPT625VOLTS
# collect the sample with cbAIn() */
while (Gain > 0):
# select gain */
WConio.gotoxy(0,10)
while 1:
Gain = int ( raw_input ("Please select one of the following ranges(1 to 4):\n"\
" 10 VOLTS UNIPOLAR --> 1\n"\
" 10 VOLTS BIPOLAR ---> 2\n"\
" 5 VOLTS UNIPOLAR --> 3\n"\
" 5 VOLTS BIPOLAR ---> 4\n"\
" Quit ---> 0\n\n"\
" Your Choice ---> "))
if ( (Gain >= 0) and (Gain <= 4) ): break
# Set Gain, MaxVal, and MinVal */
if (Gain==0): sys.exit(1)
elif (Gain==1): Gain = UNI10VOLTS
elif (Gain==2): Gain = BIP10VOLTS
elif (Gain==3): Gain = UNI5VOLTS
elif (Gain==4): Gain = BIP5VOLTS
if (Gain >= 0):
DataValue=USB1208LS.AIn (BoardNum, Chan, Gain)
EngUnits =USB1208LS.ToEngUnits(BoardNum, Gain, DataValue)
print "\nThe voltage on channel %d is %.2f " %(Chan, EngUnits)
Gain = BIPPT625VOLTS
def main():
USB1208LS=MCCDAQ()
WConio.clrscr()
print "Demonstration of DOut()\n"\
"Press any key to quit."
USB1208LS.DConfigPort (0, FIRSTPORTA, DIGITALOUT)
# get a user value to write to the port
DataValue=256
while ((DataValue < 0) or (DataValue > 255)):
DataValue = int ( raw_input('Enter a value to send to FIRSTPORTA (0-255): ') )
USB1208LS.DOut(0, FIRSTPORTA, DataValue)
print "\nThe value %u was written to FIRSTPORTA. \n" \
"see pin21-PA0 pin28-PA7" %DataValue
raw_input('\nPause')
def summaryTable(builds):
WConio.clrscr()
WConio.textcolor(WConio.WHITE)
print "PROJECT NAME".ljust(90) + "STATUS".ljust(10)
print "=" * 100
good = bad = 0
for item in builds:
if item['status'] == 'ok':
WConio.textcolor(WConio.LIGHTGREEN)
good += 1
else:
WConio.textcolor(WConio.RED)
bad += 1
print item['project'].ljust(90) + item['status'].ljust(4)
WConio.textcolor(WConio.WHITE)
print "=" * 100
WConio.textcolor(WConio.GREEN)
print "GOOD :".rjust(90) + str(good).rjust(10, '.')
WConio.textcolor(WConio.RED)
print "BAD :".rjust(90) + str(bad).rjust(10, '.')
def main():
USB1208LS=MCCDAQ()
WConio.clrscr()
print "Demonstration of AIn()\n"\
"Press any key to quit.\n"
# get the A/D channel to sample
Chan = int ( raw_input('Enter the channel to display: ') )
print "\nThe raw data value on Channel %u is: " %Chan,
(a,a,a,a,a,a,a,a,a,col,row)=WConio.gettextinfo()
print "\nThe voltage on Channel %u is: " %Chan,
# collect the sample from the channel until a key is pressed
while (WConio.kbhit()==False):
DataValue=USB1208LS.AIn (0, Chan, BIP5VOLTS)
EngUnits =USB1208LS.ToEngUnits (0, BIP5VOLTS, DataValue)
WConio.gotoxy(col,row)
print "%5d" %DataValue,
WConio.gotoxy(col,row+1)
print "%.2fV" %EngUnits,
def robust_read(self, command = None, count = 1):
"""Read from the RCS with robust exception handling."""
global servo_mode
while True:
try:
return self.read(command, count)
except DisconnectError:
servo_mode = IDLE
# Blank screen due to device disconnect.
WConio.textattr(0xb0)
WConio.clrscr()
WConio.gotoxy(10, 10)
WConio.cputs('USB-RCS has been disconnected during read. '
'Trying to reconnect. ')
self.robust_reconnect()
usb = rcs.robust_read('U')
firmware_version = usb[2]
display_once(firmware_version)
except ReadTimeoutError, e:
servo_mode = IDLE
# Blank screen due to device disconnect.
WConio.textattr(0xc0)
WConio.clrscr()
WConio.gotoxy(10, 10)
WConio.cputs('USB-RCS read timeout: '
'Communications is not responding as expected.')
WConio.gotoxy(10, 12)
raw_input("Unplug the USB-RCS.")
while self.status() != DISCONNECTED:
time.sleep(0.500)
WConio.gotoxy(10, 12)
WConio.cputs("Now, plug-in the USB-RCS.")
self.robust_reconnect()
usb = rcs.robust_read('U')
firmware_version = usb[2]
display_once(firmware_version)
except Exception, e:
WConio.textattr(0xc0)
WConio.clrscr()
WConio.gotoxy(0, 10)
print "Unexpected exception in robust_read: ", type(e)
print e
raw_input("Press enter to exit ->")
exit()
def exec_cmd(argv):
console.clrscr()
return -1
import sys
import socket
import string
import os
import io
import time
import random
import urllib2
import re
import WConio
import threading
import sys
#(2,24)
old_setting = WConio.gettextinfo()[4] & 0x00FF
WConio.clrscr()
WConio.settitle("PyBot Control Center")
WConio.gotoxy(2,2)
WConio.cputs("Welcome to the PyBot Control Center\n\r")
f = open('C:\\PyBot\\connections.txt', 'w')
j = open('C:\\PyBot\\update.txt', 'w')
p = open('C:\\PyBot\\cmd.txt', 'w')
f.write('')
j.write('')
p.write('')
f.close()
j.close()
class GetConnections ( threading.Thread ):
def run ( self ):
WConio.textcolor(WConio.LIGHTRED)
# backspace
elif v_key == '\b':
if len(v_cmd_buf) > 0:
v_cmd_buf.pop()
sys.stdout.write('\b \b')
# CTRL+Z/U, clear command buffer
elif (v_key == '\x15') or (v_key == '\x1A'):
while len(v_cmd_buf) > 0:
v_cmd_buf.pop()
sys.stdout.write('\b \b')
# CTRL+L, clear screen, but keep command
elif v_key == '\x0C':
console.clrscr()
sys.stdout.write(config.cli_prompt + '>' + ''.join(v_cmd_buf).strip())
# TAB, to auto-complete the input command
elif v_key == '\x09':
v_cmd = ''.join(v_cmd_buf).strip()
v_tmp_list = []
for v_path in config.cmd_search_path:
for v_cmd_file in os.listdir(os.getcwd() + v_path):
if (v_cmd_file[:len(config.cmd_file_prefix)] == config.cmd_file_prefix) \
and (v_cmd_file[-3:] == '.py') \
and v_cmd in v_cmd_file[len(config.cmd_file_prefix):-3]:
v_tmp_list.append(v_cmd_file[len(config.cmd_file_prefix):-3])
if len(v_tmp_list) == 1:
for i in range(len(v_cmd_buf)):
def exec_cmd(argv):
console.clrscr()
return -1
def PrintStockInfoTitleWithColor():
import WConio
WConio.settitle("My Stock Info")
WConio.clrscr()
ColorConsole.PrintStockInfoTitle()
def clr(self):
#- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
wc.clrscr()
def PrintStockInfoTitleWithColor():
import WConio
WConio.settitle("My Stock Info")
WConio.clrscr()
ColorConsole.PrintStockInfoTitle()
def clear():
W.clrscr()
game.on('clear')
def clrscr() :
"""Efface la console Windows"""
if sys.flags.interactive == 0 : # en WConio
WConio.clrscr()
def lookPrimaryArguments(data=None):
"""
Se buscan los argumentos primarios <--help, --version, ...>
:param data: Datos extra
:return: void
"""
(width, height) = getTerminalSize()
if len(sys.argv) >= 2:
if sys.argv[1] == "--benchmark":
if _wconio:
WConio.clrscr()
print "Benchmark Hero of Antair"
print "Python " + sys.version + "\n"
if len(sys.argv) == 3:
if str(sys.argv[2]).isdigit():
repeticiones = int(sys.argv[2])
if repeticiones > 1:
print "Realizando prueba benchmark a {0} repeticiones ...".format(
str(repeticiones))
ms = benchmark(True, True, repeticiones)
print "\nTiempo promedio de ejecucion: " + str(
ms) + "ms"
print "Benchmark guardado en log/benchmark"
elif repeticiones == 1:
print "Realizando prueba unica benchmark ...".format(
str(repeticiones))
ms = benchmark(True, True, repeticiones)
print "\nTiempo promedio de ejecucion: " + str(
ms) + "ms"
print "Benchmark guardado en log/benchmark"
else:
st_error(
"Error al ejecutar prueba benchmark, el numero de repeticiones debe ser mayor o igual a 1",
True)
else:
print "Realizando prueba benchmark a 5 repeticiones ..."
ms = benchmark(True, True)
print "\nTiempo promedio de ejecucion: " + str(ms) + "ms"
print "Benchmark guardado en log/benchmark"
exit()
elif sys.argv[1] == "--changelog" or sys.argv[1] == "-ch":
try:
changelog = open("CHANGELOG", "r")
print ""
for line in changelog:
if line != "":
print delAcentos(str(line)).rstrip()
changelog.close()
except:
st_error(
"Error al ejecutar el comando --changelog, Archivo no encontrado",
True)
exit()
elif sys.argv[1] == "--dwi":
try:
if _wconio:
WConio.clrscr()
archivo = open("data/doc/other/dwi.txt", "r")
print ""
for line in archivo:
if line != "":
print str(line).rstrip()
archivo.close()
except:
print ""
exit()
elif sys.argv[1] == "--fcfm" or sys.argv[1] == "--850":
try:
if _wconio:
WConio.clrscr()
asciiart = open("data/doc/other/850.txt", "r")
counter = 0
for i in asciiart:
print " " * (int((width - 26) / 2) - 3), i.rstrip()
counter += 1
if counter > 15 and i.strip() != "":
time.sleep(1)
asciiart.close()
except:
st_error(
"Error al ejecutar el comando --changelog, Archivo no encontrado"
)
exit()
elif sys.argv[1] == "--help" or sys.argv[1] == "-h":
try:
helpfile = open(
_actualpath + "data/doc/documentation/arguments.txt", "r")
for h in helpfile:
if h != "":
print h.replace("</>", color.END).replace(
"<b>", color.BOLD).rstrip()
helpfile.close()
except:
st_error(
"Error al ejecutar el comando --help, Archivo no encontrado"
)
exit()
elif sys.argv[1] == "--linecounter":
if _wconio:
WConio.clrscr()
try:
total = 0
listedfiles = []
totallines = []
for file in os.listdir(_actualpath +
"/lib/"): # @ReservedAssignment
if ".py" in file and ".pyc" not in file:
listedfiles.append(file)
archv = open(_actualpath + "/lib/" + file, "r")
for l in archv:
total += 1
archv.close()
totallines.append(total)
total = 0
for file in os.listdir(_actualpath +
"/bin/"): # @ReservedAssignment
if ".py" in file and ".pyc" not in file:
listedfiles.append(file)
archv = open(_actualpath + "/bin/" + file, "r")
for l in archv:
total += 1
archv.close()
totallines.append(total)
total = 0
brief = open(_actualpath + "linec", "w")
brief.write("Archivos analizados:\n")
for i in range(len(totallines)):
brief.write("\t" + str(listedfiles[i]) + " => " +
str(totallines[i]) + " lineas\n")
brief.write("\nTotal: " + str(sum(totallines)) + " lineas\n")
brief.close()
st_info("Archivo generado correctamente")
except:
st_error("Error al ejecutar el comando linecounter")
exit()
elif sys.argv[1] == "--sierpinski":
if _wconio:
WConio.clrscr()
if len(sys.argv) == 3:
if sys.argv[2] == "/help":
helpfile = open(
_actualpath + "data/doc/other/sierpinski.txt", "r")
print ""
for h in helpfile:
if h != "":
print h.rstrip()
helpfile.close()
else:
st_error("Argumentos incompletos, consulte --help")
exit()
elif len(sys.argv) == 4:
negative = False
reverse = False
try:
s = sys.argv[2][0:1]
except:
s = "H"
try:
r = int(sys.argv[3])
if r > 0:
pass
else:
r = 1
except:
r = 1
elif len(sys.argv) == 5:
param = sys.argv[2]
if param == "/negative":
negative = True
else:
negative = False
if param == "/reverse":
reverse = True
else:
reverse = False
try:
s = sys.argv[3][0:1]
except:
s = "H"
try:
r = int(sys.argv[4])
if r > 0:
pass
else:
r = 1
except:
r = 1
else:
st_error("Argumentos desconocidos, consulte /sierpinski /help",
True)
for x in range(height * r):
i = ""
for y in range(width):
if negative:
if not x & y:
i += s
else:
i += " "
else:
if x & y:
i += s
else:
i += " "
if reverse:
print i[::-1],
else:
print i,
exit()
elif sys.argv[1] == "--version" or sys.argv[1] == "-v":
print data
exit()
elif sys.argv[1] == "--config" or sys.argv[1] == "-c":
if len(sys.argv) > 3:
name = sys.argv[2]
value = sys.argv[3]
if name != "":
if value != "":
setConfig(name, value)
addLineConfigFile(CONFIG_HOA_FILE, name)
else:
st_error("Valor de configuración inválido", True)
else:
st_error("Nombre de configuración inválido", True)
else:
if len(sys.argv) == 3:
if sys.argv[2] == "--view":
avconf = loadConfigFile(CONFIG_HOA_FILE)
files = os.listdir(CONFIG_FOLDER)
maxsep = 0
for conf_file in files:
maxsep = max(maxsep, len(conf_file))
maxsep += 5
for conf_file in files:
if conf_file in avconf:
print conf_file.ljust(maxsep), getConfigValue(
conf_file, True, True)
else:
st_error("config: opcion desconocida", True)
else:
st_error("config: argumentos insuficientes", True)
exit()
else:
pass
def clr(self):
#- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
wc.clrscr()
import sys
import socket
import string
import os
import io
import time
import random
import urllib2
import re
import WConio
import threading
import sys
#(2,24)
old_setting = WConio.gettextinfo()[4] & 0x00FF
WConio.clrscr()
WConio.settitle("PyBot Control Center")
WConio.gotoxy(2, 2)
WConio.cputs("Welcome to the PyBot Control Center\n\r")
f = open('C:\\PyBot\\connections.txt', 'w')
j = open('C:\\PyBot\\update.txt', 'w')
p = open('C:\\PyBot\\cmd.txt', 'w')
f.write('')
j.write('')
p.write('')
f.close()
j.close()
class GetConnections(threading.Thread):
def run(self):
def initialize():
#-------------------------------------------------------------------------------
wc.clrscr()
return WindowBase()
def lookPrimaryArguments(data=None):
"""
Se buscan los argumentos primarios <--help, --version, ...>
:param data: Datos extra
:return: void
"""
(width, height) = getTerminalSize()
if len(sys.argv) >= 2:
if sys.argv[1] == "--benchmark":
if _wconio:
WConio.clrscr()
print "Benchmark Hero of Antair"
print "Python " + sys.version + "\n"
if len(sys.argv) == 3:
if str(sys.argv[2]).isdigit():
repeticiones = int(sys.argv[2])
if repeticiones > 1:
print "Realizando prueba benchmark a {0} repeticiones ...".format(
str(repeticiones))
ms = benchmark(True, True, repeticiones)
print "\nTiempo promedio de ejecucion: " + str(
ms) + "ms"
print "Benchmark guardado en log/benchmark"
elif repeticiones == 1:
print "Realizando prueba unica benchmark ...".format(
str(repeticiones))
ms = benchmark(True, True, repeticiones)
print "\nTiempo promedio de ejecucion: " + str(
ms) + "ms"
print "Benchmark guardado en log/benchmark"
else:
st_error(
"Error al ejecutar prueba benchmark, el numero de repeticiones debe ser mayor o igual a 1",
True)
else:
print "Realizando prueba benchmark a 5 repeticiones ..."
ms = benchmark(True, True)
print "\nTiempo promedio de ejecucion: " + str(ms) + "ms"
print "Benchmark guardado en log/benchmark"
exit()
elif sys.argv[1] == "--changelog" or sys.argv[1] == "-ch":
try:
changelog = open("CHANGELOG", "r")
print ""
for line in changelog:
if line != "":
print delAcentos(str(line)).rstrip()
changelog.close()
except:
st_error(
"Error al ejecutar el comando --changelog, Archivo no encontrado",
True)
exit()
elif sys.argv[1] == "--dwi":
try:
if _wconio:
WConio.clrscr()
archivo = open("data/doc/other/dwi.txt", "r")
print ""
for line in archivo:
if line != "":
print str(line).rstrip()
archivo.close()
except:
print ""
exit()
elif sys.argv[1] == "--fcfm" or sys.argv[1] == "--850":
try:
if _wconio:
WConio.clrscr()
asciiart = open("data/doc/other/850.txt", "r")
counter = 0
for i in asciiart:
print " " * (int((width - 26) / 2) - 3), i.rstrip()
counter += 1
if counter > 15 and i.strip() != "":
time.sleep(1)
asciiart.close()
except:
st_error(
"Error al ejecutar el comando --changelog, Archivo no encontrado")
exit()
elif sys.argv[1] == "--help" or sys.argv[1] == "-h":
try:
helpfile = open(
_actualpath + "data/doc/documentation/arguments.txt", "r")
for h in helpfile:
if h != "":
print h.replace("</>", color.END).replace("<b>",
color.BOLD).rstrip()
helpfile.close()
except:
st_error(
"Error al ejecutar el comando --help, Archivo no encontrado")
exit()
elif sys.argv[1] == "--linecounter":
if _wconio:
WConio.clrscr()
try:
total = 0
listedfiles = []
totallines = []
for file in os.listdir(
_actualpath + "/lib/"): # @ReservedAssignment
if ".py" in file and ".pyc" not in file:
listedfiles.append(file)
archv = open(_actualpath + "/lib/" + file, "r")
for l in archv: # @UnusedVariable
total += 1
archv.close()
totallines.append(total)
total = 0
for file in os.listdir(
_actualpath + "/bin/"): # @ReservedAssignment
if ".py" in file and ".pyc" not in file:
listedfiles.append(file)
archv = open(_actualpath + "/bin/" + file, "r")
for l in archv: # @UnusedVariable
total += 1
archv.close()
totallines.append(total)
total = 0
brief = open(_actualpath + "linec", "w")
brief.write("Archivos analizados:\n")
for i in range(len(totallines)):
brief.write(
"\t" + str(listedfiles[i]) + " => " + str(
totallines[i]) + " lineas\n")
brief.write("\nTotal: " + str(sum(totallines)) + " lineas\n")
brief.close()
st_info("Archivo generado correctamente")
except:
st_error("Error al ejecutar el comando linecounter")
exit()
elif sys.argv[1] == "--sierpinski":
if _wconio:
WConio.clrscr()
if len(sys.argv) == 3:
if sys.argv[2] == "/help":
helpfile = open(
_actualpath + "data/doc/other/sierpinski.txt", "r")
print ""
for h in helpfile:
if h != "":
print h.rstrip()
helpfile.close()
else:
st_error("Argumentos incompletos, consulte --help")
exit()
elif len(sys.argv) == 4:
negative = False
reverse = False
try:
s = sys.argv[2][0:1]
except:
s = "H"
try:
r = int(sys.argv[3])
if r > 0:
pass
else:
r = 1
except:
r = 1
elif len(sys.argv) == 5:
param = sys.argv[2]
if param == "/negative":
negative = True
else:
negative = False
if param == "/reverse":
reverse = True
else:
reverse = False
try:
s = sys.argv[3][0:1]
except:
s = "H"
try:
r = int(sys.argv[4])
if r > 0:
pass
else:
r = 1
except:
r = 1
else:
st_error(
"Argumentos desconocidos, consulte /sierpinski /help",
True)
for x in range(height * r):
i = ""
for y in range(width):
if negative:
if not x & y:
i += s
else:
i += " "
else:
if x & y:
i += s
else:
i += " "
if reverse:
print i[::-1],
else:
print i,
exit()
elif sys.argv[1] == "--version" or sys.argv[1] == "-v":
print data
exit()
elif sys.argv[1] == "--config" or sys.argv[1] == "-c":
if len(sys.argv) > 3:
name = sys.argv[2]
value = sys.argv[3]
if name != "":
if value != "":
setConfig(name, value)
addLineConfigFile(CONFIG_HOA_FILE, name)
else:
st_error("Valor de configuración inválido", True)
else:
st_error("Nombre de configuración inválido", True)
else:
if len(sys.argv) == 3:
if sys.argv[2] == "--view":
avconf = loadConfigFile(CONFIG_HOA_FILE)
files = os.listdir(CONFIG_FOLDER)
maxsep = 0
for conf_file in files:
maxsep = max(maxsep, len(conf_file))
maxsep += 5
for conf_file in files:
if conf_file in avconf:
print conf_file.ljust(maxsep), getConfigValue(
conf_file, True, True)
else:
st_error("config: opcion desconocida", True)
else:
st_error("config: argumentos insuficientes", True)
exit()
else:
pass
# backspace
elif v_key == '\b':
if len(v_cmd_buf) > 0:
v_cmd_buf.pop()
sys.stdout.write('\b \b')
# CTRL+Z/U, clear command buffer
elif (v_key == '\x15') or (v_key == '\x1A'):
while len(v_cmd_buf) > 0:
v_cmd_buf.pop()
sys.stdout.write('\b \b')
# CTRL+L, clear screen, but keep command
elif v_key == '\x0C':
console.clrscr()
sys.stdout.write(config.cli_prompt + '>' +
''.join(v_cmd_buf).strip())
# TAB, to auto-complete the input command
elif v_key == '\x09':
v_cmd = ''.join(v_cmd_buf).strip()
v_tmp_list = []
for v_path in config.cmd_search_path:
for v_cmd_file in os.listdir(os.getcwd() + v_path):
if (v_cmd_file[:len(config.cmd_file_prefix)] == config.cmd_file_prefix) \
and (v_cmd_file[-3:] == '.py') \
and v_cmd in v_cmd_file[len(config.cmd_file_prefix):-3]:
v_tmp_list.append(
v_cmd_file[len(config.cmd_file_prefix):-3])
def initialize():
#-------------------------------------------------------------------------------
wc.clrscr()
return WindowBase()