def setDefaults(self):
# check on problematic global tags with no association of cabling map folders exist; in this case we use the old cabling
logMuon.debug("in setDefaults")
problematic_tags = ['COMCOND-HLT[A-C]-00[01]-00', 'COMCOND-ES1C-00[01]-00', 'COMCOND-REPC-001', 'COMCOND-SIM-01-00']
if any(re.match(tag,globalflags.ConditionsTag()) for tag in problematic_tags):
# setting the values (not just the defaults)
self.UseAlines = 'none'
self.UseBlines = 'none'
self.UseIlines = False
self.UseAsBuilt = False
logMuon.info("No good alignment constants associated to Conditions Tag %r: UseAlines=%r UseBlines=%r UseIlines=%r UseAsBuilt=%r",
globalflags.ConditionsTag(),self.UseAlines(), self.UseBlines(), self.UseIlines(), self.UseAsBuilt() )
#
# simulation, digitization and reconstruction
#
# MDT
elif globalflags.DataSource() == 'geant4': # MC reconstruction or digitization
setDefault(self.UseAlines, 'none')
setDefault(self.UseBlines, 'none')
setDefault(self.UseIlines, False)
setDefault(self.UseAsBuilt, False)
logMuon.info("Running a reconstruction job on geant4 or a digitization job: UseAlines=%r UseBlines=%r UseIlines=%r UseAsBuilt=%r",
self.UseAlines(), self.UseBlines(), self.UseIlines(), self.UseAsBuilt())
else:
# here reconstruction or real data
setDefault(self.UseAlines, 'all')
setDefault(self.UseBlines, 'all')
setDefault(self.UseIlines, True)
setDefault(self.UseAsBuilt, True)
logMuon.info("Running a reconstruction job on data: UseAlines=%r UseBlines=%r UseIlines=%r UseAsBuilt=%r",
self.UseAlines(), self.UseBlines(), self.UseIlines(), self.UseAsBuilt())
def GetApproximateFieldFromConditions():
#Note that the values returned are not exact. They should be interpreted only as Field ON/OFF.
#The values are set in line 26 at the beginning of this script
#fullSolenoidCurrent is set to 7700.0
#fullToroidCurrent is set to 20500.0
logAutoConfiguration.info(
"Trying to guess magnetic field status from conditionsTag")
solenoidCurrent = None
toroidCurrent = None
from AthenaCommon.GlobalFlags import globalflags
cond = globalflags.ConditionsTag()
if cond.startswith('COMCOND-ES1CST-') or cond.startswith(
'COMCOND-ES1SST-') or cond.startswith('COMCOND-ES1PST-'):
solenoidCurrent = fullSolenoidCurrent
toroidCurrent = fullToroidCurrent
elif cond.startswith('COMCOND-ES1CS-') or cond.startswith(
'COMCOND-ES1SS-') or cond.startswith('COMCOND-ES1PS-'):
solenoidCurrent = fullSolenoidCurrent
toroidCurrent = 0.0
elif cond.startswith('COMCOND-ES1CT-') or cond.startswith(
'COMCOND-ES1ST-') or cond.startswith('COMCOND-ES1PT-'):
solenoidCurrent = 0.0
toroidCurrent = fullToroidCurrent
elif cond.startswith('COMCOND-ES1C-') or cond.startswith(
'COMCOND-ES1S-') or cond.startswith('COMCOND-ES1P-'):
solenoidCurrent = 0.0
toroidCurrent = 0.0
else:
logAutoConfiguration.warning(
"Don't know how to interpret magnetic field status from conditionsTag '%s'."
% cond)
return solenoidCurrent, toroidCurrent
def ConfigureConditionsTag():
if globalflags.ConditionsTag.is_locked():
logAutoConfiguration.info("conditionsTag is locked to value: '%s'." %
globalflags.ConditionsTag())
return
from PyUtils.MetaReaderPeeker import metadata
if metadata['file_type'] == 'POOL' or metadata[
'file_type'] == 'BS' and metadata['eventTypes'][
0] == 'IS_SIMULATION':
try:
globalflags.ConditionsTag.set_Value_and_Lock(
metadata['IOVDbGlobalTag'])
logAutoConfiguration.info(
"Auto-configured ConditionsTag '%s' from MetaReaderPeeker ",
globalflags.ConditionsTag())
except:
logAutoConfiguration.error(
"ConditionsTag could not be auto-configured no info stored in MetaReaderPeeker!!!"
)
#logAutoConfiguration.warning("Input simulated bs file does not contain bs_metadata with conditions_tag !")
pass
pass
else: #Regular data files
try:
year = int(rec.projectName()[4:6])
except:
logAutoConfiguration.warning(
"Failed to extract year from project tag " +
rec.projectName() + ". Guessing 2015")
year = 15
if (year < 14): #Run1
globalflags.ConditionsTag.set_Value_and_Lock(
"COMCOND-BLKPA-RUN1-09")
logAutoConfiguration.info(
"Found run 1 input bytestream file, autoconfigure conditions tag to '%s'"
% globalflags.ConditionsTag())
else:
globalflags.ConditionsTag.set_Value_and_Lock(
"CONDBR2-BLKPA-2015-17")
logAutoConfiguration.info(
"Found run 2 input bytestream file, autoconfigure conditions tag to '%s'"
% globalflags.ConditionsTag())
pass
pass
return
def ConfigureConditionsTag():
if globalflags.ConditionsTag.is_locked():
logAutoConfiguration.info("conditionsTag is locked to value: '%s'." %
globalflags.ConditionsTag())
return
from RecExConfig.InputFilePeeker import inputFileSummary
if inputFileSummary['file_type'] == 'pool' or inputFileSummary[
'file_type'] == 'bs' and inputFileSummary['evt_type'][
0] == 'IS_SIMULATION':
try:
globalflags.ConditionsTag.set_Value_and_Lock(
inputFileSummary['conditions_tag'])
logAutoConfiguration.info(
"Auto-configured ConditionsTag '%s' from inputFileSummary ",
globalflags.ConditionsTag())
except:
logAutoConfiguration.error(
"ConditionsTag could not be auto-configured no info stored in inputFileSummary!!!"
)
#logAutoConfiguration.warning("Input simulated bs file does not contain bs_metadata with conditions_tag !")
pass
pass
else: #Regular data files
try:
year = int(rec.projectName()[4:6])
except:
logAutoConfiguration.warning(
"Failed to extract year from project tag " + projectName +
". Guessing 2015")
year = 15
if (year < 14): #Run1
globalflags.ConditionsTag.set_Value_and_Lock(
"COMCOND-BLKPA-RUN1-09")
logAutoConfiguration.info(
"Found run 1 input bytestream file, autoconfigure conditions tag to '%s'"
% globalflags.ConditionsTag())
else:
globalflags.ConditionsTag.set_Value_and_Lock(
"CONDBR2-BLKPA-2015-17")
logAutoConfiguration.info(
"Found run 2 input bytestream file, autoconfigure conditions tag to '%s'"
% globalflags.ConditionsTag())
pass
pass
return
def CombinedMuonTrackBuilder( name='CombinedMuonTrackBuilder', **kwargs ):
import MuonCombinedRecExample.CombinedMuonTrackSummary
from AthenaCommon.AppMgr import ToolSvc
kwargs.setdefault("CaloEnergyParam" , getPublicTool("MuidCaloEnergyToolParam") )
kwargs.setdefault("CaloTSOS" , getPublicTool("MuidCaloTrackStateOnSurface") )
kwargs.setdefault("CscRotCreator" , getPublicTool("CscClusterOnTrackCreator") )
kwargs.setdefault("Fitter" , getPublicTool("iPatFitter") )
kwargs.setdefault("SLFitter" , getPublicTool("iPatSLFitter") )
kwargs.setdefault("MaterialAllocator" , getPublicTool("MuidMaterialAllocator") )
kwargs.setdefault("MdtRotCreator" , getPublicTool("MdtDriftCircleOnTrackCreator") )
kwargs.setdefault("MuonHoleRecovery" , getPublicTool("MuidSegmentRegionRecoveryTool") )
kwargs.setdefault("Propagator" , getPublicTool("MuonCombinedPropagator") )
kwargs.setdefault("SLPropagator" , getPublicTool("MuonCombinedPropagator") )
kwargs.setdefault("CleanCombined" , True )
kwargs.setdefault("CleanStandalone" , True )
kwargs.setdefault("BadFitChi2" , 2.5 )
kwargs.setdefault("LargeMomentumError" , 0.5 )
kwargs.setdefault("LineMomentum" , muonStandaloneFlags.straightLineFitMomentum() )
kwargs.setdefault("LowMomentum" , 10.*GeV )
kwargs.setdefault("MinEnergy" , 0.3*GeV )
kwargs.setdefault("PerigeeAtSpectrometerEntrance" , False )
kwargs.setdefault("ReallocateMaterial" , False )
kwargs.setdefault("Vertex2DSigmaRPhi" , 100.*mm )
kwargs.setdefault("Vertex3DSigmaRPhi" , 6.*mm )
kwargs.setdefault("Vertex3DSigmaZ" , 60.*mm)
kwargs.setdefault("TrackSummaryTool" , ToolSvc.CombinedMuonTrackSummary )
kwargs.setdefault("UseCaloTG" , True ) #
if beamFlags.beamType() == 'cosmics':
kwargs.setdefault("MdtRotCreator" , "" )
kwargs.setdefault("LowMomentum" , 1.5*GeV )
kwargs.setdefault("ReallocateMaterial", False )
kwargs.setdefault("Vertex2DSigmaRPhi" , 100.*mm )
kwargs.setdefault("Vertex3DSigmaRPhi" , 100.*mm )
kwargs.setdefault("Vertex3DSigmaZ" , 1.*meter )
# configure tools for data reprocessing
if muonRecFlags.enableErrorTuning():
# use alignment effects on track for all algorithms
useAlignErrs = True
if conddb.dbdata == 'COMP200' or conddb.dbmc == 'COMP200' or 'HLT' in globalflags.ConditionsTag() or conddb.isOnline :
useAlignErrs = False
kwargs.setdefault("MuonErrorOptimizer", getPublicToolClone("MuidErrorOptimisationTool",
"MuonErrorOptimisationTool",
PrepareForFit = False,
RecreateStartingParameters = False,
RefitTool = getPublicToolClone("MuidRefitTool",
"MuonRefitTool",
AlignmentErrors = useAlignErrs,
Fitter = getPublicTool("iPatFitter"))))
if muonRecFlags.doSegmentT0Fit():
kwargs.setdefault("MdtRotCreator" , "" )
getPublicTool("MuonCaloParticleCreator")
return CfgMgr.Rec__CombinedMuonTrackBuilder(name,**kwargs)
def MuonRefitTool(name, **kwargs):
# To activate the tuning of meas. errors using alignment constants from DB
# kwargs.setdefault("AlignmentErrorTool", getPublicTool("MuonAlignmentErrorTool"))
# kwargs.setdefault("DeweightBEE", False)
# kwargs.setdefault("DeweightEE", False)
if conddb.dbdata == 'COMP200' or conddb.dbmc == 'COMP200' or 'HLT' in globalflags.ConditionsTag(
) or conddb.isOnline:
kwargs["AlignmentErrorTool"] = None
return CfgMgr.Muon__MuonRefitTool(name, **kwargs)
def _resolve_db_tag(origDbTag):
from AthenaCommon.GlobalFlags import globalflags
if origDbTag is not None:
dbtag = origDbTag
else:
dbtag = globalflags.ConditionsTag()
dbtag = dbtag if dbtag != '' else 'HEAD'
print "RESOLVED AS TAG", dbtag
return dbtag
persOutput = cfgRecExPers['streamAOD'].list()
allInput = objKeyStore['inputFile'].list()
diff = []
for i in persOutput:
if not i in allInput:
diff += [i]
if len(diff) > 0:
print " (experimental) the following objects should be written in AOD according to RecExPers/share/OKS_streamAOD_fromESD.py"
print "but are not in input ESD file.File probably need to be updated, or maybe this is not full reco", diff
if rec.doWriteAOD() and rec.doESD():
persOutput = cfgRecExPers['streamAOD'].list()
schedOutput = objKeyStore['streamAOD'].list()
diff = []
for i in persOutput:
if not i in schedOutput:
diff += [i]
if len(diff) > 0:
print " (experimental) the following objects should be written in AOD according to RecExPers/share/OKS_streamAOD_fromESD.py"
print "but are not in new streamAOD. File probably need to be updated, or maybe this is non full reco", diff
except Exception:
print "Could not check cfgRecExpers"
from AthenaCommon.GlobalFlags import globalflags
from AthenaCommon.BeamFlags import jobproperties
print "TrfJobReport metaData_geometryVersion = %s" % globalflags.DetDescrVersion(
)
print "TrfJobReport metaData_conditionsTag = %s" % globalflags.ConditionsTag()
print "TrfJobReport metaData_BeamType = %s" % jobproperties.Beam.beamType()
printfunc(
"but are not in input ESD file.File probably need to be updated, or maybe this is not full reco",
diff)
if rec.doWriteAOD() and rec.doESD():
persOutput = cfgRecExPers['streamAOD'].list()
schedOutput = objKeyStore['streamAOD'].list()
diff = []
for i in persOutput:
if not i in schedOutput:
diff += [i]
if len(diff) > 0:
printfunc(
" (experimental) the following objects should be written in AOD according to RecExPers/share/OKS_streamAOD_fromESD.py"
)
printfunc(
"but are not in new streamAOD. File probably need to be updated, or maybe this is non full reco",
diff)
except Exception:
printfunc("Could not check cfgRecExpers")
from AthenaCommon.GlobalFlags import globalflags
from AthenaCommon.BeamFlags import jobproperties
printfunc("TrfJobReport metaData_geometryVersion = %s" %
globalflags.DetDescrVersion())
printfunc("TrfJobReport metaData_conditionsTag = %s" %
globalflags.ConditionsTag())
printfunc("TrfJobReport metaData_BeamType = %s" %
jobproperties.Beam.beamType())
InDetFlags.doNewTracking.set_Value_and_Lock(True)
#InDetFlags.doSlimming.set_Value_and_Lock(False)
#InDetFlags.doSiSPSeededTrackFinder.set_Value_and_Lock(True)
InDetFlags.doPRDFormation.set_Value_and_Lock(True)
#print "PP PP PP PP Config"
#InDetNewTrackingCuts = ConfiguredNewTrackingCuts("Offline")
#InDetNewTrackingCuts.printInfo()
from AthenaCommon.GlobalFlags import globalflags
globalflags.ConditionsTag.set_Value_and_Lock('COMCOND-BLKPST-004-07')
#main jobOptions
include("RecExCommon/RecExCommon_topOptions.py")
print "PPPPP " + globalflags.ConditionsTag()
conddb.setGlobalTag(globalflags.ConditionsTag())
if goodRunList != '' and 'goodRunListArray' in dir(
) and goodRunListArray != '':
# add LumiBlockMetaDataTool to ToolSvc and configure
from LumiBlockComps.LumiBlockCompsConf import LumiBlockMetaDataTool
ToolSvc += LumiBlockMetaDataTool("LumiBlockMetaDataTool")
LumiBlockMetaDataTool.calcLumi = False # False by default
LumiBlockMetaDataTool.storeXMLFiles = True
LumiBlockMetaDataTool.applyDQCuts = True
LumiBlockMetaDataTool.OutputLevel = INFO
# add ToolSvc.LumiBlockMetaDataTool to MetaDataSvc
from EventSelectorAthenaPool.EventSelectorAthenaPoolConf import MetaDataSvc
af = athFile.fopen(athenaCommonFlags.BSRDOInput()[0])
_run_number = af.run_number[0]
TriggerJobOpts.Modifiers._run_number = _run_number # noqa, set by athenaHLT
from RecExConfig.RecFlags import rec
rec.RunNumber = _run_number
del _run_number
ConfigFlags.Input.Format = 'BS' if globalflags.InputFormat == 'bytestream' else 'POOL'
# Set final Cond/Geo tag based on input file, command line or default
globalflags.DetDescrVersion = opt.setDetDescr or ConfigFlags.Trigger.OnlineGeoTag
ConfigFlags.GeoModel.AtlasVersion = globalflags.DetDescrVersion()
globalflags.ConditionsTag = opt.setGlobalTag or ConfigFlags.Trigger.OnlineCondTag
ConfigFlags.IOVDb.GlobalTag = globalflags.ConditionsTag()
# Other defaults
ConfigFlags.Beam.Type = jobproperties.Beam.beamType = 'collisions'
jobproperties.Beam.bunchSpacing = 25
globalflags.DatabaseInstance = 'CONDBR2' if opt.useCONDBR2 else 'COMP200'
ConfigFlags.IOVDb.DatabaseInstance = globalflags.DatabaseInstance()
athenaCommonFlags.isOnline.set_Value_and_Lock(opt.isOnline)
log.info('Configured the following global flags:')
globalflags.print_JobProperties()
# Set default doL1Sim option depending on input type (if not set explicitly)
if 'doL1Sim' not in globals():
opt.doL1Sim = ConfigFlags.Input.isMC
log.info('Setting default doL1Sim=%s because ConfigFlags.Input.isMC=%s',
globalflags.DataSource = 'data'
globalflags.InputFormat = 'bytestream'
globalflags.ConditionsTag = ConditionsTag if ConditionsTag else 'COMCOND-ES1C-000-00'
del ConditionsTag
# auto config
try: # recent switch from RecExCommon to RecExConfig
from RecExConfig.AutoConfiguration import ConfigureFieldAndGeo
except:
from RecExCommon.AutoConfiguration import ConfigureFieldAndGeo
ConfigureFieldAndGeo()
# database tag
from IOVDbSvc.CondDB import conddb
conddb.setGlobalTag(globalflags.ConditionsTag())
# setup detflags
import DetDescrCnvSvc.DetStoreConfig
from AthenaCommon.DetFlags import DetFlags
if doLAr: DetFlags.detdescr.LAr_setOn()
if doTile: DetFlags.detdescr.Tile_setOn()
# needed ....
from RecExConfig.RecFlags import rec
rec.doLArg = doLAr
rec.doTile = doTile
rec.doCalo = doLAr or doTile
rec.Commissioning = True
# setup geometry
def CombinedMuonTrackBuilder( name='CombinedMuonTrackBuilder', **kwargs ):
from AthenaCommon.AppMgr import ToolSvc
kwargs.setdefault("CaloEnergyParam" , getPublicTool("MuidCaloEnergyToolParam") )
kwargs.setdefault("CaloTSOS" , getPublicTool("MuidCaloTrackStateOnSurface") )
kwargs.setdefault("MaterialAllocator" , getPublicTool("MuidMaterialAllocator") )
kwargs.setdefault("MdtRotCreator" , getPublicTool("MdtDriftCircleOnTrackCreator") )
kwargs.setdefault("CleanCombined" , True )
kwargs.setdefault("CleanStandalone" , True )
kwargs.setdefault("BadFitChi2" , 2.5 )
kwargs.setdefault("LargeMomentumError" , 0.5 )
kwargs.setdefault("LineMomentum" , muonStandaloneFlags.straightLineFitMomentum() )
kwargs.setdefault("LowMomentum" , 10.*GeV )
kwargs.setdefault("MinEnergy" , 0.3*GeV )
kwargs.setdefault("PerigeeAtSpectrometerEntrance" , False )
kwargs.setdefault("ReallocateMaterial" , False )
kwargs.setdefault("Vertex2DSigmaRPhi" , 100.*mm )
kwargs.setdefault("Vertex3DSigmaRPhi" , 6.*mm )
kwargs.setdefault("Vertex3DSigmaZ" , 60.*mm)
kwargs.setdefault("UseCaloTG" , True ) #
kwargs.setdefault("CaloMaterialProvider" , getPublicTool("MuonMaterialProviderTool"))
kwargs.setdefault("TrackQuery" , getPrivateTool("MuonTrackQuery") )
if TriggerFlags.MuonSlice.doTrigMuonConfig:
kwargs.setdefault("MuonHoleRecovery" , "" )
trigTrackSummary = getPublicToolClone("TrigMuonTrackSummary", "MuonTrackSummaryTool")
if DetFlags.detdescr.ID_on():
from InDetTrigRecExample.InDetTrigConfigRecLoadTools import InDetTrigTrackSummaryHelperTool
trigTrackSummary.InDetSummaryHelperTool = InDetTrigTrackSummaryHelperTool
trigTrackSummary.doHolesInDet = True
kwargs.setdefault("TrackSummaryTool" , trigTrackSummary )
kwargs.setdefault("Propagator" , ToolSvc.AtlasRungeKuttaPropagator)
kwargs.setdefault("SLPropagator" , ToolSvc.AtlasRungeKuttaPropagator)
#The trigger uses the iPatFitter in different sequences that do and do not include ID tracking
#so using the same track summary tool as is used here to get it correct
trackSummary = kwargs["TrackSummaryTool"]
suffix = "MS"
if "Trig" in trackSummary.name():
suffix = "CB"
kwargs.setdefault("Fitter" , getPublicToolClone("TrigiPatFitter_"+suffix, "iPatFitter", TrackSummaryTool=trackSummary) )
kwargs.setdefault("SLFitter" , getPublicToolClone("TrigiPatSLFitter_"+suffix, "iPatSLFitter", TrackSummaryTool=trackSummary) )
kwargs.setdefault("MuonErrorOptimizer", "")
kwargs.setdefault("CscRotCreator" , "" )
kwargs.setdefault("Cleaner" , getPrivateToolClone("TrigMuidTrackCleaner_"+suffix, "MuidTrackCleaner", Fitter=kwargs["Fitter"]) )
else:
import MuonCombinedRecExample.CombinedMuonTrackSummary
kwargs.setdefault("MuonHoleRecovery" , getPublicTool("MuidSegmentRegionRecoveryTool") )
kwargs.setdefault("TrackSummaryTool" , ToolSvc.CombinedMuonTrackSummary )
kwargs.setdefault("Propagator" , getPublicTool("MuonCombinedPropagator") )
kwargs.setdefault("SLPropagator" , getPublicTool("MuonCombinedPropagator") )
kwargs.setdefault("Fitter" , getPublicTool("iPatFitter") )
kwargs.setdefault("SLFitter" , getPublicTool("iPatSLFitter") )
kwargs.setdefault("CscRotCreator" , (getPublicTool("CscClusterOnTrackCreator") if MuonGeometryFlags.hasCSC() else "") )
kwargs.setdefault("Cleaner" , getPrivateTool("MuidTrackCleaner") )
if beamFlags.beamType() == 'cosmics':
kwargs.setdefault("MdtRotCreator" , "" )
kwargs.setdefault("LowMomentum" , 1.5*GeV )
kwargs.setdefault("ReallocateMaterial", False )
kwargs.setdefault("Vertex2DSigmaRPhi" , 100.*mm )
kwargs.setdefault("Vertex3DSigmaRPhi" , 100.*mm )
kwargs.setdefault("Vertex3DSigmaZ" , 1.*meter )
# configure tools for data reprocessing
if muonRecFlags.enableErrorTuning():
# use alignment effects on track for all algorithms
useAlignErrs = True
if conddb.dbdata == 'COMP200' or conddb.dbmc == 'COMP200' or 'HLT' in globalflags.ConditionsTag() or conddb.isOnline or TriggerFlags.MuonSlice.doTrigMuonConfig:
useAlignErrs = False
kwargs.setdefault("MuonErrorOptimizer", getPublicToolClone("MuidErrorOptimisationTool",
"MuonErrorOptimisationTool",
PrepareForFit = False,
RecreateStartingParameters = False,
RefitTool = getPublicToolClone("MuidRefitTool", "MuonRefitTool", AlignmentErrors = useAlignErrs, Fitter = getPublicTool("iPatFitter"))
))
if muonRecFlags.doSegmentT0Fit():
kwargs.setdefault("MdtRotCreator" , "" )
getPublicTool("MuonCaloParticleCreator")
return CfgMgr.Rec__CombinedMuonTrackBuilder(name,**kwargs)
if not (muonAlignFlags.UseAlines == 'none'
and muonAlignFlags.UseBlines == 'none'):
MuonDetectorTool.UseConditionDb = 1
# here define to what extent B-lines are enabled
if muonAlignFlags.UseBlines == 'none':
MuonDetectorTool.EnableMdtDeformations = 0
elif muonAlignFlags.UseBlines == 'all':
MuonDetectorTool.EnableMdtDeformations = 1
elif muonAlignFlags.UseBlines == 'barrel':
MuonDetectorTool.EnableMdtDeformations = 2
elif muonAlignFlags.UseBlines == 'endcaps':
MuonDetectorTool.EnableMdtDeformations = 3
# here define if I-lines (CSC internal alignment) are enabled
if muonAlignFlags.UseIlines:
if 'HLT' in globalflags.ConditionsTag():
logMuon.info(
"Reading CSC I-Lines from layout - special configuration for COMP200 in HLT setup."
)
MuonDetectorTool.UseIlinesFromGM = True
MuonDetectorTool.EnableCscInternalAlignment = False
else:
logMuon.info("Reading CSC I-Lines from conditions database.")
conddb.addFolderSplitOnline('MUONALIGN',
'/MUONALIGN/Onl/CSC/ILINES',
'/MUONALIGN/CSC/ILINES',
className='CondAttrListCollection')
MuonDetectorTool.UseIlinesFromGM = False
MuonDetectorTool.EnableCscInternalAlignment = True
MuonAlignAlg.ParlineFolders += ["/MUONALIGN/CSC/ILINES"]
MuonAlignAlg.ILinesFromCondDB = True
elif testZmumu or testZprime:
DetDescrVersion = "ATLAS-GEO-20-00-01"
ConditionsTag = "OFLCOND-MC12-SDR-06"
elif testBug:
DetDescrVersion = "ATLAS-GEO-14-00-00"
ConditionsTag = 'OFLCOND-SDR-BS7T-02'
elif recFlags.readESD:
DetDescrVersion = "ATLAS-GEO-10-00-01"
else:
DetDescrVersion = "ATLAS-GEO-16-00-00"
from AthenaCommon.JobProperties import jobproperties
from AthenaCommon.GlobalFlags import globalflags
globalflags.DetDescrVersion = DetDescrVersion
globalflags.ConditionsTag = ConditionsTag
print globalflags.DetDescrVersion(), globalflags.ConditionsTag()
#--------------------------------------------------------------
# select detectors to be used for reconstruction
# uncomment appropriate line to turn pixel, SCT and/or TRT off)
#--------------------------------------------------------------
from AthenaCommon.DetFlags import DetFlags
if rec.readRDO:
DetFlags.readRDOPool.ID_setOn()
#DetFlags.makeRIO.ID_setOn()
#--------------------------------------------------------------
# set appropriate configuration into AthenaCommon.globalflags
#--------------------------------------------------------------
if rec.readESD:
globalflags.DataSource = 'data'
import os, sys, string, commands
import pickle
from AthenaCommon.GlobalFlags import globalflags
from AthenaCommon.AthenaCommonFlags import jobproperties, athenaCommonFlags
onlinegoodies = {}
onlinegoodies['DataSource'] = globalflags.DataSource()
onlinegoodies['InputFormat'] = globalflags.InputFormat()
onlinegoodies['ConditionsTag'] = globalflags.ConditionsTag()
onlinegoodies['beamType'] = jobproperties.Beam.beamType()
onlinegoodies['DetDescrVersion'] = globalflags.DetDescrVersion()
file = open("globalflags.pickle", 'w')
pickle.dump(onlinegoodies, file)
file.close()
msg.info(globalflags)
#--------------------------------------------------------------
# Set up conditions
#--------------------------------------------------------------
from RecExConfig.RecFlags import rec
rec.projectName.set_Value_and_Lock("data12_8TeV")
#--------------------------------------------------------------
# Load IOVDbSvc
#--------------------------------------------------------------
#include("IOVDbSvc/IOVDbSvc_jobOptions.py")
IOVDbSvc = Service("IOVDbSvc")
from IOVDbSvc.CondDB import conddb
conddb.dbdata = "COMP200"
IOVDbSvc.GlobalTag = globalflags.ConditionsTag()
IOVDbSvc.OutputLevel = DEBUG
#--------------------------------------------------------------
# Set Detector setup
#--------------------------------------------------------------
# --- switch on InnerDetector
from AthenaCommon.DetFlags import DetFlags
DetFlags.ID_setOff()
DetFlags.Calo_setOff()
DetFlags.Muon_setOff()
DetFlags.Truth_setOff()
DetFlags.LVL1_setOff()
DetFlags.SCT_setOn()
# ---- switch parts of ID off/on as follows
def setDefaults(self):
# check on problematic global tags with no association of cabling map folders exist; in this case we use the old cabling
problematic_tags_mdtrpc = [
'COMCOND-00[0-6]', 'COMCOND-HLT[A-C]-00[0-1]',
'COMCOND-MONC-00[0-1]', 'COMCOND-ES1C-00[0-1]',
'COMCOND-REPC-00[0-4]', 'OFLCOND-CSC', 'OFLCOND-FDR'
]
problematic_tags_tgc = [
'COMCOND-00[0-5]', 'COMCOND-006-00', 'CMCCOND-CSC',
'OFLCOND-FDR-02-0[4-6]', 'OFLCOND-FDR-02-10'
]
# MDT
# if globalflags.InputFormat.is_bytestream() and globalflags.DataSource() == 'geant4':
# setDefault(self.MdtCablingMode, 'old')
# else:
# if any(re.match(tag,globalflags.ConditionsTag()) for tag in problematic_tags_mdtrpc):
# setDefault(self.MdtCablingMode, 'old')
# else:
# if globalflags.DataSource() == 'data' or DetFlags.digitize.MDT_on():
# setDefault(self.MdtCablingMode, 'new')
# else:
# setDefault(self.MdtCablingMode, 'auto')
# RPC
if globalflags.InputFormat.is_bytestream() and globalflags.DataSource(
) == 'geant4':
setDefault(self.RpcCablingMode, 'sim')
else:
if any(
re.match(tag, globalflags.ConditionsTag())
for tag in problematic_tags_mdtrpc):
setDefault(self.RpcCablingMode, 'old')
else:
if globalflags.DataSource(
) == 'data' or DetFlags.digitize.RPC_on():
setDefault(self.RpcCablingMode, 'new')
else:
setDefault(self.RpcCablingMode, 'auto')
# if globalflags.DataSource() == 'data':
# # 2010Jan7th - move to new cabling also when the trigger (i.e. LVL1 emul. or HLT algorithms) is on
# #if doTrigger==True or any(re.match(tag,globalflags.ConditionsTag()) for tag in problematic_tags_mdtrpc):
# if any(re.match(tag,globalflags.ConditionsTag()) for tag in problematic_tags_mdtrpc):
# setDefault(self.RpcCablingMode, 'old') # default is old when using trigger
## if doTrigger:
## logMuon.info("RPC cabling: Setting to OLD because of trigger settings")
## else:
# logMuon.info("RPC cabling: Setting to OLD because of condition data tags not including RPC cabling maps")
# else:
# setDefault(self.RpcCablingMode, 'new')
# logMuon.info("RPC cabling: Setting to NEW")
# else:
# setDefault(self.RpcCablingMode, 'sim')
# logMuon.info("RPC cabling: Setting to SIM")
#TGC
setDefault(self.TgcCablingMode, 'auto')
# do not use the call-back for digitization job
#use the call-back in the overlay job that has no bytestream data as input
# and avoid access to Db for problematic tags
if DetFlags.digitize.TGC_on() and not globalflags.isOverlay():
if any(
re.match(tag, globalflags.ConditionsTag())
for tag in problematic_tags_tgc):
setDefault(self.TgcCablingMode, 'old 12-fold')
else:
setDefault(self.TgcCablingMode, '12-fold')
# avoid to use call-back if input is bytestream or data and avoid access to Db for problematic tags
if globalflags.DataSource.is_data(
) or globalflags.InputFormat.is_bytestream():
if any(
re.match(tag, globalflags.ConditionsTag())
for tag in problematic_tags_tgc):
setDefault(self.TgcCablingMode, 'old 12-fold')
else:
setDefault(self.TgcCablingMode, '12-fold')
# call-back works for RDO files only and avoid access to Db for problematic tags
if self.TgcCablingMode() == 'auto' and not DetFlags.haveRDO.TGC_on():
if any(
re.match(tag, globalflags.ConditionsTag())
for tag in problematic_tags_tgc):
setDefault(self.TgcCablingMode, 'old 12-fold')
else:
setDefault(self.TgcCablingMode, '12-fold')
athenaCommonFlags.FilesInput = ["root://eosatlas//eos/atlas/atlascerngroupdisk/perf-idtracking/InDetRecExample/data10_cos.00151040.physics_IDCosmic.recon.ESD.f220/data10_cos.00151040.physics_IDCosmic.recon.ESD.f220._lb0002._0001.1"]
if doReadBS:
# Since BS doesn't yet support xrootd need to set
import os
os.environ['STAGE_HOST']="castoratlast3"
os.environ['STAGE_SVCCLASS']="atlascerngroupdisk"
athenaCommonFlags.FilesInput = ["root://eosatlas//eos/atlas/atlascerngroupdisk/proj-sit/tct/rec_input/tracking/data10_cos.00151040.physics_IDCosmic.merge.RAW._lb0002._0001.1"]
import AthenaPython.ConfigLib as apcl
cfg = apcl.AutoCfg(name = 'InDetRecExampleAutoConfig', input_files=athenaCommonFlags.FilesInput())
cfg.configure_job()
if doReadBS:
from AthenaCommon.GlobalFlags import globalflags
if len(globalflags.ConditionsTag())!=0:
from IOVDbSvc.CondDB import conddb
conddb.setGlobalTag(globalflags.ConditionsTag())
# request TrackingGeo tag AtlasLayerMat_v18_ATLAS-GEO-16
# but there are only AtlasLayerMat_v16_ATLAS-GEO-16
# or AtlasLayerMat_v18_ATLAS-R1-2010-01
# @TODO switch to more recent data file ?
conddb.addOverride('/GLOBAL/TrackingGeo/LayerMaterialV2','AtlasLayerMat_v19s0_ATLAS-R1-2010-01')
#conddb.addOverride('/GLOBAL/TrackingGeo/LayerMaterialV2','AtlasLayerMat_v16_ATLAS-GEO-16')
import MagFieldServices.SetupField
theApp.EvtMax = 50
#--------------------------------------------------------------
# Control
MuonDetectorTool.UseConditionDb = 1
MuonDetectorTool.TheMuonAlignmentTool = MGM_AlignmentDbTool
# here define to what extent B-lines are enabled
if muonAlignFlags.UseBlines == 'none':
MuonDetectorTool.EnableMdtDeformations = 0
elif muonAlignFlags.UseBlines == 'all':
MuonDetectorTool.EnableMdtDeformations = 1
elif muonAlignFlags.UseBlines == 'barrel':
MuonDetectorTool.EnableMdtDeformations = 2
elif muonAlignFlags.UseBlines == 'endcaps':
MuonDetectorTool.EnableMdtDeformations = 3
# here define if I-lines (CSC internal alignment) are enabled
if muonAlignFlags.UseIlines:
MuonDetectorTool.EnableCscInternalAlignment = True
if conddb.dbdata == 'COMP200' and 'HLT' in globalflags.ConditionsTag():
logMuon.info(
"Reading CSC I-Lines from layout - special configuration for COMP200 in HLT setup."
)
MuonDetectorTool.UseIlinesFromGM = True
MuonAlignmentDbTool.ILinesFromCondDB = False
else:
logMuon.info("Reading CSC I-Lines from conditions database.")
conddb.addFolderSplitOnline('MUONALIGN', '/MUONALIGN/Onl/CSC/ILINES',
'/MUONALIGN/CSC/ILINES')
MuonAlignmentDbTool.ParlineFolders += ["/MUONALIGN/CSC/ILINES"]
MuonDetectorTool.UseIlinesFromGM = False
MuonAlignmentDbTool.ILinesFromCondDB = True
# here define if As-Built (MDT chamber alignment) are enabled
if muonAlignFlags.UseAsBuilt: