def first_point_is_inside_face(cls, e_1, e_2):
"""Находится ли первая точка контура внутри поверхности."""
first_point = list(e_1[1])[0].GetEndPoint(0)
trans = e_2[0].ComputeDerivatives(UV(0, 0))
Pt = trans.Inverse.OfPoint(first_point)
res = e_2[0].IsInside(UV(Pt.X, Pt.Y))
return res
def corners(self):
"""Возвращает все 4 угла региона."""
p1 = self.points[0]
p2 = UV(self.points[1].U, self.points[0].V)
p3 = self.points[1]
p4 = UV(self.points[0].U, self.points[1].V)
return (p1, p2, p3, p4)
def __init__(self, start_p, end_p):
"""
Args:
start_p (_PatternPoint):
end_p (_PatternPoint):
"""
self.start_point = start_p if start_p.v <= end_p.v else end_p
self.end_point = end_p if start_p.v <= end_p.v else start_p
self.u_vector = UV(1, 0)
def get_all_corner(cls, region, face=None):
"""Возвращает все углы данного региона."""
pr1, pr2 = region[0], region[1]
p1 = pr1
p2 = UV(pr2.U, pr1.V)
p3 = pr2
p4 = UV(pr1.U, pr2.V)
if face is None:
return (p1, p2, p3, p4)
return (face.Evaluate(p1), face.Evaluate(p2), face.Evaluate(p3), face.Evaluate(p4))
def region_in_same_direction(cls, region, regions, direction=0):
"""Находит регионы соответствующего направления."""
regions_same_direction = list()
for cur_region in regions:
if direction == 0:
same_direction = region.points[0].IsAlmostEqualTo(UV(region.points[0].U, cur_region.points[0].V)) and region.points[1].IsAlmostEqualTo(UV(region.points[1].U, cur_region.points[1].V))
else:
same_direction = region.points[0].IsAlmostEqualTo(UV(cur_region.points[0].U, region.points[0].V)) and region.points[1].IsAlmostEqualTo(UV(cur_region.points[1].U, region.points[1].V))
if same_direction:
regions_same_direction.append(cur_region)
return regions_same_direction
def concate_regions(self, *regs):
"""Объединяет заданные регионы.
Находит самую верхнюю левую и нижнюю правую
"""
us = [self.points[0].U, self.points[1].U]
vs = [self.points[0].V, self.points[1].V]
for region in regs:
us.append(region.points[0].U)
vs.append(region.points[0].V)
us.append(region.points[1].U)
vs.append(region.points[1].V)
uv_max = UV(max(us), max(vs))
uv_min = UV(min(us), min(vs))
self.points = (uv_min, uv_max)
def get_tgt_space(self, space_uuid, src_space):
try:
return self.tgt_spaces[space_uuid]
except KeyError:
level = self.tgt_levels[src_space.Level.Name]
uv = UV(src_space.Location.Point.X, src_space.Location.Point.Y)
return self.tgt_doc.Create.NewSpace(level, uv)
def add_offset(self, lines, offset):
"""Добавляем отступ линии
"""
new_lines = []
for line in lines:
points = [line.GetEndPoint(0), line.GetEndPoint(1)]
for point_pos in range(0, 2):
point = points[point_pos]
faces = set()
for face in self.room_faces:
plane = face.GetSurface()
project_point = plane.Project(point)
# echo(project_point)
if project_point:
if project_point[1] < self.tollerance:
faces.add(face)
normal_sum = XYZ(0, 0, 0)
for face in faces:
normal_sum += face.ComputeNormal(UV())
if abs(normal_sum.X) > 0.0001: dev_x = abs(normal_sum.X)
else: dev_x = 1
if abs(normal_sum.Y) > 0.0001: dev_y = abs(normal_sum.Y)
else: dev_y = 1
normal_sum = XYZ(normal_sum.X / dev_x, normal_sum.Y / dev_y, 0)
point -= normal_sum * offset
points[point_pos] = point
new_lines.append(Line.CreateBound(points[0], points[1]))
return new_lines
def fill_grid_from_dict(self, data):
fill_grid = FillGrid()
for prop_name in FILL_PROP_NAMES:
setattr(fill_grid, prop_name, data[prop_name])
setattr(fill_grid, "Origin", UV(*data["Origin"]))
setattr(fill_grid, "Segments", data["Segments"])
return fill_grid
def concate_regions(cls, *regs):
"""Объединяет заданные регионы.
Находит самую верхнюю левую и нижнюю правую
"""
us = set()
vs = set()
region_type = regs[0][2]
for region in regs:
us.add(region[0].U)
vs.add(region[0].V)
us.add(region[1].U)
vs.add(region[1].V)
uv_max = UV(max(us), max(vs))
uv_min = UV(min(us), min(vs))
return (uv_min, uv_max, region_type)
def space_creator(self, room, lvls):
'''
Function creates new spaces
room: Revit Room, lvls: level elevations and levels dictionary
'''
try:
# Get the room level
room_lvl = room.Level
# Get a level from the lvls dictionary by room level elevation
lvl = lvls.get(room_lvl.Elevation)
# Create space by coordinates and level taken from room
with Transaction(self.doc, "Batch create spaces") as tr:
tr.Start()
options = tr.GetFailureHandlingOptions()
failureHandler = ErrorSwallower()
options.SetFailuresPreprocessor(failureHandler)
options.SetClearAfterRollback(True)
tr.SetFailureHandlingOptions(options)
room_coords = self.transform.OfPoint(room.Location.Point)
space = self.doc.Create.NewSpace(
lvl, UV(room_coords.X, room_coords.Y))
# Get "REFERENCED_ROOM_UNIQUE_ID" parameter
ref_id_par = space.GetParameters(self._search_id)[0]
# Assign room UniqueID to "REFERENCED_ROOM_UNIQUE_ID" parameter
if ref_id_par:
if ref_id_par.StorageType == StorageType.String:
ref_id_par.Set(room.UniqueId)
self.New_MEPSpaces[
room.UniqueId] = self.New_MEPSpaces.get(
room.UniqueId, space)
self.para_setter(room, space)
else:
ref_id_par.Set(room.Id.IntegerValue)
self.New_MEPSpaces[
room.Id.IntegerValue] = self.New_MEPSpaces.get(
room.Id.IntegerValue, space)
self.para_setter(room, space)
tr.Commit()
except Exception as e:
logger.error(e, exc_info=True)
pass
try:
with Transaction(self.doc, "Set space Id") as tr:
tr.Start()
# Get "ID_revit" parameter of a MEP space
space_id = space.GetParameters("ID_revit")[0]
# Assign space ID to "ID_revit" parameter
if space_id:
space_id.Set(space.Id.IntegerValue)
tr.Commit()
except Exception as e:
logger.error(e, exc_info=True)
pass
def find_nearest_point_by_direction(cls, point, points, direction=0):
"""Находим ближайшую точку по направлению.
direction
0 - по вертикали
1 - по горизонтали
"""
gen_point = point
if direction != 0:
gen_point = UV(gen_point.V, gen_point.U)
find_point = None
for point in points:
if direction != 0:
temp_point = UV(point.V, point.U)
else:
temp_point = point
if not gen_point.IsAlmostEqualTo(UV(gen_point.U, temp_point.V)):
if temp_point.V > gen_point.V:
distance = gen_point.DistanceTo(temp_point)
if not find_point or find_point[1] > distance:
find_point = (temp_point, distance)
if find_point:
if direction != 0:
return UV(find_point[0].V, find_point[0].U)
return find_point[0]
def find_wall_direction_faces(cls, wall):
"""Ищем боковые поверхносит стены."""
faces = cls.get_faces_from_solid(wall)
direction = wall.Orientation
result = []
for face in faces:
normal = face.ComputeNormal(UV(0, 0))
if normal.IsAlmostEqualTo(direction) or normal.Negate().IsAlmostEqualTo(direction):
result.append(face)
return result
def _make_fill_grid(pattern_grid, scale):
rvt_fill_grid = FillGrid()
rvt_fill_grid.Angle = pattern_grid.angle
rvt_fill_grid.Origin = UV(pattern_grid.origin.u * scale,
pattern_grid.origin.v * scale)
rvt_fill_grid.Offset = pattern_grid.offset * scale
rvt_fill_grid.Shift = pattern_grid.shift * scale
if pattern_grid.segments:
scaled_segments = [seg * scale for seg in pattern_grid.segments]
rvt_fill_grid.SetSegments(scaled_segments)
return rvt_fill_grid
def region_find_near(cls, region, regions):
"""Ищет соседствующие регионы с таким же типом"""
region_points = [region[0]]
region_points += [UV(region[1].U, region[0].V)]
region_points += [UV(region[0].U, region[1].V)]
region_points += [region[1]]
near_regions = list()
for cur_region in regions:
if region[2] == cur_region[2]:
cur_region_points = [cur_region[0]]
cur_region_points += [UV(cur_region[1].U, cur_region[0].V)]
cur_region_points += [UV(cur_region[0].U, cur_region[1].V)]
cur_region_points += [cur_region[1]]
are_near = 0
for region_point in region_points:
for cur_region_point in cur_region_points:
if cur_region_point.IsAlmostEqualTo(region_point):
are_near += 1
if are_near >= 2 and are_near < 4:
near_regions.append(cur_region)
return near_regions
def get_charactep_points_in_face(cls, face):
"""
Ищет все характерные точки на плоскости.
Сейчас работает только с прямыми линиями.
"""
cls = face.GetEdgesAsCurveLoops()
u_set = set()
v_set = set()
for cl in cls:
for line in cl:
if isinstance(line, Line):
uv = face.Project(line.GetEndPoint(0)).UVPoint
u_set.add(uv.U)
v_set.add(uv.V)
all_UV_points = set()
for u in u_set:
for v in v_set:
all_UV_points.add(UV(u, v))
return all_UV_points
BuiltInCategory.OST_Rooms).WhereElementIsNotElementType().ToElements()
def GetElementCenter(el, v):
cen = el.Location.Point
z = (el.UpperLimit.Elevation + el.LimitOffset) / 2
cen = cen.Add(XYZ(0, 0, z))
return cen
# def GetElementCenter( el, v ):
# bounding = el.BoundingBox[v]
# center = (bounding.Max + bounding.Min) * 0.5
# return center
t = Transaction(doc, 'Tag All Rooms in All Views')
t.Start()
for v in views:
for el in rooms:
loc = GetElementCenter(el, v)
if isinstance(v, View3D) or isinstance(v, ViewDrafting) or isinstance(
v, ViewSheet):
continue
else:
roomtag = doc.Create.NewRoomTag(LinkElementId(el.Id),
UV(loc.X, loc.Y), v.Id)
if isinstance(v, ViewSection):
roomtag.Location.Move(XYZ(0, 0, loc.Z))
t.Commit()
# noinspection PyUnresolvedReferences
from Autodesk.Revit.DB import FilteredElementCollector as Fec
# noinspection PyUnresolvedReferences
from Autodesk.Revit.DB import BuiltInCategory, LinkElementId, UV, XYZ, ViewSection, ViewPlan
views = Fec(doc).OfCategory(
BuiltInCategory.OST_Views).WhereElementIsNotElementType().ToElements()
rooms = Fec(doc).OfCategory(
BuiltInCategory.OST_Rooms).WhereElementIsNotElementType().ToElements()
def GetElementCenter(el, v):
cen = el.Location.Point
z = (el.UpperLimit.Elevation + el.LimitOffset) / 2
cen = cen.Add(XYZ(0, 0, z))
return cen
with Action('Tag All Rooms in All Views'):
for v in views:
for el in rooms:
room_center = GetElementCenter(el, v)
if type(v) in [ViewSection, ViewPlan]:
logger.debug('Working on view: %s' % v.ViewName)
roomtag = doc.Create.NewRoomTag(
LinkElementId(el.Id), UV(room_center.X, room_center.Y),
v.Id)
if isinstance(v, ViewSection):
roomtag.Location.Move(XYZ(0, 0, room_center.Z))
active_lvl = active_view.GenLevel
class RoomWarningSwallower(IFailuresPreprocessor):
def PreprocessFailures(self, failuresAccessor):
fail_list = List[FailureMessageAccessor]()
fail_acc_list = failuresAccessor.GetFailureMessages().GetEnumerator()
for failure in fail_acc_list:
failure_id = failure.GetFailureDefinitionId()
failure_severity = failure.GetSeverity()
failure_type = BuiltInFailures.RoomFailures.RoomNotEnclosed
if failure_id == failure_type:
print("{0} with id: {1} of type: RoomNotEnclosed removed!".
format(failure_severity, failure_id.Guid))
failuresAccessor.DeleteWarning(failure)
return FailureProcessingResult.Continue
# "Start" the transaction
tx = Transaction(doc, "place unenclosed room")
tx.Start()
options = tx.GetFailureHandlingOptions()
options.SetFailuresPreprocessor(RoomWarningSwallower())
tx.SetFailureHandlingOptions(options)
room = doc.Create.NewRoom(active_lvl, UV(0, 0))
# "End" the transaction
tx.Commit()
from scriptutils import logger
from revitutils import doc, Action
# noinspection PyUnresolvedReferences
from Autodesk.Revit.DB import FilteredElementCollector as Fec
# noinspection PyUnresolvedReferences
from Autodesk.Revit.DB import BuiltInCategory, LinkElementId, UV, XYZ, ViewSection, ViewPlan
views = Fec(doc).OfCategory( BuiltInCategory.OST_Views).WhereElementIsNotElementType().ToElements()
spaces = Fec(doc).OfCategory(BuiltInCategory.OST_MEPSpaces).WhereElementIsNotElementType().ToElements()
def GetElementCenter(el, v):
cen = el.Location.Point
z = (el.UpperLimit.Elevation + el.LimitOffset) / 2
cen = cen.Add( XYZ( 0, 0, z ) )
return cen
with Action('Tag All Rooms in All Views'):
for v in views:
for el in spaces:
room_center = GetElementCenter(el, v)
if type(v) in [ViewSection, ViewPlan]:
logger.debug('Working on view: %s' % v.ViewName)
roomtag = doc.Create.NewRoomTag(LinkElementId(el.Id), UV(room_center.X, room_center.Y), v.Id)
if isinstance(v, ViewSection):
roomtag.Location.Move(XYZ(0, 0, room_center.Z))
class _PatternLine:
def __init__(self, start_p, end_p):
"""
Args:
start_p (_PatternPoint):
end_p (_PatternPoint):
"""
self.start_point = start_p if start_p.v <= end_p.v else end_p
self.end_point = end_p if start_p.v <= end_p.v else start_p
self.u_vector = UV(1, 0)
def __repr__(self):
return '<_PatternLine Start:{} End:{} Length:{} Angle:{}>'.format(
self.start_point, self.end_point, self.length, self.angle)
@property
def direction(self):
return _PatternPoint(self.end_point.u - self.start_point.u,
self.end_point.v - self.start_point.v)
@property
def angle(self):
# always return angle to u direction
# todo: fix and use actual math for angles to remove revit dependency
return self.u_vector.AngleTo(UV(self.direction.u, self.direction.v))
@property
def center_point(self):
return _PatternPoint((self.end_point.u + self.start_point.u) / 2.0,
(self.end_point.v + self.start_point.v) / 2.0)
@property
def length(self):
return abs(sqrt(self.direction.u**2 + self.direction.v**2))
def point_on_line(self, point, tolerance=ZERO_TOL):
a = self.start_point
b = self.end_point
c = point
if 0.0 <= abs((a.u - c.u) * (b.v - c.v) - (a.v - c.v) *
(b.u - c.u)) <= tolerance:
return True
else:
return False
def intersect(self, pat_line):
xdiff = _PatternPoint(self.start_point.u - self.end_point.u,
pat_line.start_point.u - pat_line.end_point.u)
ydiff = _PatternPoint(self.start_point.v - self.end_point.v,
pat_line.start_point.v - pat_line.end_point.v)
def det(a, b):
return a.u * b.v - a.v * b.u
div = det(xdiff, ydiff)
if div == 0:
raise PyRevitException('Lines do not intersect.')
d = _PatternPoint(det(self.start_point, self.end_point),
det(pat_line.start_point, pat_line.end_point))
int_point_x = det(d, xdiff) / div
int_point_y = det(d, ydiff) / div
return _PatternPoint(int_point_x, int_point_y)
def rotate(self, origin, angle):
self.start_point.rotate(origin, angle)
self.end_point.rotate(origin, angle)
def angle(self):
# always return angle to u direction
# todo: fix and use actual math for angles to remove revit dependency
return self.u_vector.AngleTo(UV(self.direction.u, self.direction.v))
BuiltInCategory.OST_Levels).WhereElementIsNotElementType().ToElements()
'''
linkrooms = []
linkrooms.append(FilteredElementCollector(doc).OfCategory(BuiltInCategory.OST_Rooms).WhereElementIsNotElementType().ToElements())
levels = FilteredElementCollector(doc).OfCategory(BuiltInCategory.OST_Levels).WhereElementIsNotElementType().ToElements()
'''
t = Transaction(doc, 'Create Spaces')
t.Start()
for g_rooms in linkrooms:
for room in g_rooms:
if room.Area > 0:
list = []
message = []
cArray = CurveArray()
pt = room.Location.Point
uv = UV(pt.X, pt.Y)
elev = round(room.Level.Elevation)
level2 = None
for level in levels:
elev2 = round(level.Elevation)
if elev == elev2:
level2 = level
if level2 is not None:
if round(level2.Elevation) == round(
doc.ActiveView.GenLevel.Elevation):
name = room.get_Parameter(
BuiltInParameter.ROOM_NAME).AsString()
number = room.get_Parameter(
BuiltInParameter.ROOM_NUMBER).AsString()
height = room.get_Parameter(
from Autodesk.Revit.UI import TaskDialog
from System import Math
uidoc = __revit__.ActiveUIDocument
doc = __revit__.ActiveUIDocument.Document
curview = doc.ActiveView
if isinstance(curview, View3D) and curview.IsSectionBoxActive:
try:
ref = uidoc.Selection.PickObject(ObjectType.Face)
el = doc.GetElement(ref.ElementId)
face = el.GetGeometryObjectFromReference(ref)
box = curview.GetSectionBox()
norm = face.ComputeNormal(UV(0, 0)).Normalize()
boxNormal = box.Transform.Basis[0].Normalize()
angle = norm.AngleTo(boxNormal)
axis = XYZ(0, 0, 1.0)
origin = XYZ(box.Min.X + (box.Max.X - box.Min.X) / 2,
box.Min.Y + (box.Max.Y - box.Min.Y) / 2, 0.0)
if norm.Y * boxNormal.X < 0:
rotate = Transform.CreateRotationAtPoint(axis, Math.PI / 2 - angle,
origin)
else:
rotate = Transform.CreateRotationAtPoint(axis, angle, origin)
box.Transform = box.Transform.Multiply(rotate)
t = Transaction(doc, 'Orient Section Box to Face')
t.Start()
curview.SetSectionBox(box)
uidoc.RefreshActiveView()
cl_views = FilteredElementCollector(doc)
views = cl_views.OfCategory(
BuiltInCategory.OST_Views).WhereElementIsNotElementType().ToElements()
cl_rooms = FilteredElementCollector(doc)
spaces = cl_rooms.OfCategory(
BuiltInCategory.OST_MEPSpaces).WhereElementIsNotElementType().ToElements()
def GetElementCenter(el, v):
cen = el.Location.Point
z = (el.UpperLimit.Elevation + el.LimitOffset) / 2
cen = cen.Add(XYZ(0, 0, z))
return cen
t = Transaction(doc, 'Tag All Spaces in All Views')
t.Start()
for v in views:
for el in spaces:
loc = GetElementCenter(el, v)
if isinstance(v, View3D) or isinstance(v, ViewDrafting) or isinstance(
v, ViewSheet):
continue
else:
spacetag = doc.Create.NewSpaceTag(el, UV(loc.X, loc.Y), v)
if isinstance(v, ViewSection):
spacetag.Location.Move(XYZ(0, 0, loc.Z))
t.Commit()
