def OnInfoSelect(self): if self.infoToolButton.getSelected(): self.infoToolButton.setSelected(False) self.tool = previewTools.toolNone(self.glCanvas) else: self.infoToolButton.setSelected(True) self.tool = previewTools.toolInfo(self.glCanvas) self.rotateToolButton.setSelected(False) self.scaleToolButton.setSelected(False) self.returnToModelViewAndUpdateModel()
def OnInfoSelect(self):
self.infoToolButton.setSelected(True)
self.rotateToolButton.setSelected(False)
self.scaleToolButton.setSelected(False)
self.tool = previewTools.toolInfo(self.glCanvas)
self.glCanvas.Refresh()
def OnInfoSelect(self): self.infoToolButton.setSelected(True) self.rotateToolButton.setSelected(False) self.scaleToolButton.setSelected(False) self.tool = previewTools.toolInfo(self.glCanvas) self.glCanvas.Refresh()
def __init__(self):
super(projectPlanner, self).__init__(None,
title='Cura - Project Planner')
wx.EVT_CLOSE(self, self.OnClose)
self.panel = wx.Panel(self, -1)
self.SetSizer(wx.BoxSizer(wx.VERTICAL))
self.GetSizer().Add(self.panel, 1, flag=wx.EXPAND)
self.SetDropTarget(
dropTarget.FileDropTarget(self.OnDropFiles,
meshLoader.supportedExtensions()))
self.list = []
self.selection = None
self.printMode = 0
self.alwaysAutoPlace = profile.getPreference(
'planner_always_autoplace') == 'True'
self.machineSize = numpy.array([
profile.getPreferenceFloat('machine_width'),
profile.getPreferenceFloat('machine_depth'),
profile.getPreferenceFloat('machine_height')
])
self.headSizeMin = numpy.array([
profile.getPreferenceFloat('extruder_head_size_min_x'),
profile.getPreferenceFloat('extruder_head_size_min_y'), 0
])
self.headSizeMax = numpy.array([
profile.getPreferenceFloat('extruder_head_size_max_x'),
profile.getPreferenceFloat('extruder_head_size_max_y'), 0
])
self.extruderOffset = [
numpy.array([0, 0, 0]),
numpy.array([
profile.getPreferenceFloat('extruder_offset_x1'),
profile.getPreferenceFloat('extruder_offset_y1'), 0
]),
numpy.array([
profile.getPreferenceFloat('extruder_offset_x2'),
profile.getPreferenceFloat('extruder_offset_y2'), 0
]),
numpy.array([
profile.getPreferenceFloat('extruder_offset_x3'),
profile.getPreferenceFloat('extruder_offset_y3'), 0
])
]
self.toolbar = toolbarUtil.Toolbar(self.panel)
toolbarUtil.NormalButton(self.toolbar, self.OnLoadProject, 'open.png',
'Open project')
toolbarUtil.NormalButton(self.toolbar, self.OnSaveProject, 'save.png',
'Save project')
self.toolbar.AddSeparator()
group = []
toolbarUtil.RadioButton(self.toolbar,
group,
'object-3d-on.png',
'object-3d-off.png',
'3D view',
callback=self.On3DClick).SetValue(
self.alwaysAutoPlace)
toolbarUtil.RadioButton(
self.toolbar,
group,
'object-top-on.png',
'object-top-off.png',
'Topdown view',
callback=self.OnTopClick).SetValue(not self.alwaysAutoPlace)
self.toolbar.AddSeparator()
toolbarUtil.NormalButton(self.toolbar, self.OnPreferences,
'preferences.png',
'Project planner preferences')
self.toolbar.AddSeparator()
toolbarUtil.NormalButton(
self.toolbar, self.OnCutMesh, 'cut-mesh.png',
'Cut a plate STL into multiple STL files, and add those files to the project.\nNote: Splitting up plates sometimes takes a few minutes.'
)
toolbarUtil.NormalButton(
self.toolbar, self.OnSaveCombinedSTL, 'save-combination.png',
'Save all the combined STL files into a single STL file as a plate.'
)
self.toolbar.AddSeparator()
group = []
self.printOneAtATime = toolbarUtil.RadioButton(
self.toolbar,
group,
'view-normal-on.png',
'view-normal-off.png',
'Print one object at a time',
callback=self.OnPrintTypeChange)
self.printAllAtOnce = toolbarUtil.RadioButton(
self.toolbar,
group,
'all-at-once-on.png',
'all-at-once-off.png',
'Print all the objects at once',
callback=self.OnPrintTypeChange)
self.toolbar.AddSeparator()
toolbarUtil.NormalButton(self.toolbar, self.OnQuit, 'exit.png',
'Close project planner')
self.toolbar.Realize()
self.toolbar2 = toolbarUtil.Toolbar(self.panel)
toolbarUtil.NormalButton(self.toolbar2, self.OnAddModel,
'object-add.png', 'Add model')
toolbarUtil.NormalButton(self.toolbar2, self.OnRemModel,
'object-remove.png', 'Remove model')
self.toolbar2.AddSeparator()
toolbarUtil.NormalButton(self.toolbar2, self.OnMoveUp, 'move-up.png',
'Move model up in print list')
toolbarUtil.NormalButton(self.toolbar2, self.OnMoveDown,
'move-down.png',
'Move model down in print list')
toolbarUtil.NormalButton(self.toolbar2, self.OnCopy, 'copy.png',
'Make a copy of the current selected object')
toolbarUtil.NormalButton(
self.toolbar2, self.OnSetCustomProfile, 'set-profile.png',
'Set a custom profile to be used to prepare a specific object.')
self.toolbar2.AddSeparator()
if not self.alwaysAutoPlace:
toolbarUtil.NormalButton(
self.toolbar2, self.OnAutoPlace, 'autoplace.png',
'Automaticly organize the objects on the platform.')
toolbarUtil.NormalButton(self.toolbar2, self.OnSlice, 'slice.png',
'Prepare to project into a gcode file.')
self.toolbar2.Realize()
sizer = wx.GridBagSizer(2, 2)
self.panel.SetSizer(sizer)
self.glCanvas = PreviewGLCanvas(self.panel, self)
self.listbox = wx.ListBox(self.panel, -1, choices=[])
self.addButton = wx.Button(self.panel, -1, "Add")
self.remButton = wx.Button(self.panel, -1, "Remove")
self.sliceButton = wx.Button(self.panel, -1, "Prepare")
if not self.alwaysAutoPlace:
self.autoPlaceButton = wx.Button(self.panel, -1, "Auto Place")
sizer.Add(self.toolbar, (0, 0),
span=(1, 1),
flag=wx.EXPAND | wx.LEFT | wx.RIGHT)
sizer.Add(self.toolbar2, (0, 1),
span=(1, 2),
flag=wx.EXPAND | wx.LEFT | wx.RIGHT)
sizer.Add(self.glCanvas, (1, 0), span=(5, 1), flag=wx.EXPAND)
sizer.Add(self.listbox, (1, 1), span=(1, 2), flag=wx.EXPAND)
sizer.Add(self.addButton, (2, 1), span=(1, 1))
sizer.Add(self.remButton, (2, 2), span=(1, 1))
sizer.Add(self.sliceButton, (3, 1), span=(1, 1))
if not self.alwaysAutoPlace:
sizer.Add(self.autoPlaceButton, (3, 2), span=(1, 1))
sizer.AddGrowableCol(0)
sizer.AddGrowableRow(1)
self.addButton.Bind(wx.EVT_BUTTON, self.OnAddModel)
self.remButton.Bind(wx.EVT_BUTTON, self.OnRemModel)
self.sliceButton.Bind(wx.EVT_BUTTON, self.OnSlice)
if not self.alwaysAutoPlace:
self.autoPlaceButton.Bind(wx.EVT_BUTTON, self.OnAutoPlace)
self.listbox.Bind(wx.EVT_LISTBOX, self.OnListSelect)
panel = wx.Panel(self.panel, -1)
sizer.Add(panel, (5, 1), span=(1, 2))
sizer = wx.GridBagSizer(2, 2)
panel.SetSizer(sizer)
self.rotateToolButton = openglGui.glButton(self.glCanvas, 1, 'Rotate',
(0, 1), self.OnRotateSelect)
self.scaleToolButton = openglGui.glButton(self.glCanvas, 2, 'Scale',
(0, 2), self.OnScaleSelect)
self.SetSize((800, 600))
self.tool = previewTools.toolInfo(self.glCanvas)
def __init__(self):
super(projectPlanner, self).__init__(None, title='Cura - Project Planner')
wx.EVT_CLOSE(self, self.OnClose)
self.panel = wx.Panel(self, -1)
self.SetSizer(wx.BoxSizer(wx.VERTICAL))
self.GetSizer().Add(self.panel, 1, flag=wx.EXPAND)
self.SetDropTarget(dropTarget.FileDropTarget(self.OnDropFiles, meshLoader.supportedExtensions()))
self.list = []
self.selection = None
self.printMode = 0
self.alwaysAutoPlace = profile.getPreference('planner_always_autoplace') == 'True'
self.machineSize = numpy.array([profile.getPreferenceFloat('machine_width'), profile.getPreferenceFloat('machine_depth'), profile.getPreferenceFloat('machine_height')])
self.headSizeMin = numpy.array([profile.getPreferenceFloat('extruder_head_size_min_x'), profile.getPreferenceFloat('extruder_head_size_min_y'),0])
self.headSizeMax = numpy.array([profile.getPreferenceFloat('extruder_head_size_max_x'), profile.getPreferenceFloat('extruder_head_size_max_y'),0])
self.extruderOffset = [
numpy.array([0,0,0]),
numpy.array([profile.getPreferenceFloat('extruder_offset_x1'), profile.getPreferenceFloat('extruder_offset_y1'), 0]),
numpy.array([profile.getPreferenceFloat('extruder_offset_x2'), profile.getPreferenceFloat('extruder_offset_y2'), 0]),
numpy.array([profile.getPreferenceFloat('extruder_offset_x3'), profile.getPreferenceFloat('extruder_offset_y3'), 0])]
self.toolbar = toolbarUtil.Toolbar(self.panel)
toolbarUtil.NormalButton(self.toolbar, self.OnLoadProject, 'open.png', 'Open project')
toolbarUtil.NormalButton(self.toolbar, self.OnSaveProject, 'save.png', 'Save project')
self.toolbar.AddSeparator()
group = []
toolbarUtil.RadioButton(self.toolbar, group, 'object-3d-on.png', 'object-3d-off.png', '3D view', callback=self.On3DClick).SetValue(self.alwaysAutoPlace)
toolbarUtil.RadioButton(self.toolbar, group, 'object-top-on.png', 'object-top-off.png', 'Topdown view', callback=self.OnTopClick).SetValue(not self.alwaysAutoPlace)
self.toolbar.AddSeparator()
toolbarUtil.NormalButton(self.toolbar, self.OnPreferences, 'preferences.png', 'Project planner preferences')
self.toolbar.AddSeparator()
toolbarUtil.NormalButton(self.toolbar, self.OnCutMesh, 'cut-mesh.png', 'Cut a plate STL into multiple STL files, and add those files to the project.\nNote: Splitting up plates sometimes takes a few minutes.')
toolbarUtil.NormalButton(self.toolbar, self.OnSaveCombinedSTL, 'save-combination.png', 'Save all the combined STL files into a single STL file as a plate.')
self.toolbar.AddSeparator()
group = []
self.printOneAtATime = toolbarUtil.RadioButton(self.toolbar, group, 'view-normal-on.png', 'view-normal-off.png', 'Print one object at a time', callback=self.OnPrintTypeChange)
self.printAllAtOnce = toolbarUtil.RadioButton(self.toolbar, group, 'all-at-once-on.png', 'all-at-once-off.png', 'Print all the objects at once', callback=self.OnPrintTypeChange)
self.toolbar.AddSeparator()
toolbarUtil.NormalButton(self.toolbar, self.OnQuit, 'exit.png', 'Close project planner')
self.toolbar.Realize()
self.toolbar2 = toolbarUtil.Toolbar(self.panel)
toolbarUtil.NormalButton(self.toolbar2, self.OnAddModel, 'object-add.png', 'Add model')
toolbarUtil.NormalButton(self.toolbar2, self.OnRemModel, 'object-remove.png', 'Remove model')
self.toolbar2.AddSeparator()
toolbarUtil.NormalButton(self.toolbar2, self.OnMoveUp, 'move-up.png', 'Move model up in print list')
toolbarUtil.NormalButton(self.toolbar2, self.OnMoveDown, 'move-down.png', 'Move model down in print list')
toolbarUtil.NormalButton(self.toolbar2, self.OnCopy, 'copy.png', 'Make a copy of the current selected object')
toolbarUtil.NormalButton(self.toolbar2, self.OnSetCustomProfile, 'set-profile.png', 'Set a custom profile to be used to prepare a specific object.')
self.toolbar2.AddSeparator()
if not self.alwaysAutoPlace:
toolbarUtil.NormalButton(self.toolbar2, self.OnAutoPlace, 'autoplace.png', 'Automaticly organize the objects on the platform.')
toolbarUtil.NormalButton(self.toolbar2, self.OnSlice, 'slice.png', 'Prepare to project into a gcode file.')
self.toolbar2.Realize()
sizer = wx.GridBagSizer(2,2)
self.panel.SetSizer(sizer)
self.glCanvas = PreviewGLCanvas(self.panel, self)
self.listbox = wx.ListBox(self.panel, -1, choices=[])
self.addButton = wx.Button(self.panel, -1, "Add")
self.remButton = wx.Button(self.panel, -1, "Remove")
self.sliceButton = wx.Button(self.panel, -1, "Prepare")
if not self.alwaysAutoPlace:
self.autoPlaceButton = wx.Button(self.panel, -1, "Auto Place")
sizer.Add(self.toolbar, (0,0), span=(1,1), flag=wx.EXPAND|wx.LEFT|wx.RIGHT)
sizer.Add(self.toolbar2, (0,1), span=(1,2), flag=wx.EXPAND|wx.LEFT|wx.RIGHT)
sizer.Add(self.glCanvas, (1,0), span=(5,1), flag=wx.EXPAND)
sizer.Add(self.listbox, (1,1), span=(1,2), flag=wx.EXPAND)
sizer.Add(self.addButton, (2,1), span=(1,1))
sizer.Add(self.remButton, (2,2), span=(1,1))
sizer.Add(self.sliceButton, (3,1), span=(1,1))
if not self.alwaysAutoPlace:
sizer.Add(self.autoPlaceButton, (3,2), span=(1,1))
sizer.AddGrowableCol(0)
sizer.AddGrowableRow(1)
self.addButton.Bind(wx.EVT_BUTTON, self.OnAddModel)
self.remButton.Bind(wx.EVT_BUTTON, self.OnRemModel)
self.sliceButton.Bind(wx.EVT_BUTTON, self.OnSlice)
if not self.alwaysAutoPlace:
self.autoPlaceButton.Bind(wx.EVT_BUTTON, self.OnAutoPlace)
self.listbox.Bind(wx.EVT_LISTBOX, self.OnListSelect)
panel = wx.Panel(self.panel, -1)
sizer.Add(panel, (5,1), span=(1,2))
sizer = wx.GridBagSizer(2,2)
panel.SetSizer(sizer)
self.infoToolButton = openglGui.glButton(self.glCanvas, 0, 'Info', 0,0, self.OnInfoSelect)
self.rotateToolButton = openglGui.glButton(self.glCanvas, 1, 'Rotate', 0,1, self.OnRotateSelect)
self.scaleToolButton = openglGui.glButton(self.glCanvas, 2, 'Scale', 0,2, self.OnScaleSelect)
self.SetSize((800,600))
self.tool = previewTools.toolInfo(self.glCanvas)