class HoldingTemplate(HoldingTemplateBase):
'''
classdocs
'''
def __init__(self, point3d_0, double_0, speed_0, altitude_0, speed_1,
double_1, double_2, orientationType_0):
'''
Constructor
'''
# double num;
# double num1;
# double num2;
# double num3;
# double num4;
# Point3d point3d;
# Point3d point3d1;
# Point3d point3d2;
# Point3d point3d3;
# Point3d point3d4;
# Point3d point3d5;
# Point3d point3d6;
# Point3d point3d7;
# Point3d point3d8;
# Point3d point3d9;
# Point3d point3d10;
# Point3d point3d11;
# Point3d point3d12;
# Point3d point3d13;
# Point3d point3d14;
# Point3d point3d15;
# Point3d point3d16;
# Point3d point3d17;
# Point3d point3d18;
# Point3d point3d19;
# Point3d point3d20;
# Point3d point3d21;
# Point3d point3d22;
# Point3d point3d23;
# Point3d point3d24;
# Point3d point3d25;
# Point3d point3d26;
# Point3d point3d27;
# Point3d point3d28;
# Point3d point3d29;
# Point3d point3d30;
# Point3d point3d31;
# Point3d point3d32;
# Point3d point3d33;
# Point3d point3d34;
# Point3d point3d35;
point3d_0 = point3d_0.smethod_167(0)
self.ptBase = point3d_0
self.trackDeg = MathHelper.smethod_3(double_0)
self.trackRad = MathHelper.smethod_4(Unit.ConvertDegToRad(double_0))
self.orientation = orientationType_0
self.tas = Speed.smethod_0(speed_0, double_1, altitude_0)
self.R = min([943.27 / self.tas.KilometresPerHour, 3])
self.radius = Distance(
Unit.ConvertKMToMeters(self.tas.KilometresPerHour /
(62.8318530717959 * self.R)))
metresPerSecond = self.tas.MetresPerSecond
metres = self.radius.Metres
kilometresPerHour = speed_1.KilometresPerHour
metresPerSecond1 = speed_1.MetresPerSecond
r = 45 * metresPerSecond1 / self.R
double2 = double_2 * 60
self.ds = Distance(metresPerSecond * double2)
self.wd = Distance(
math.sqrt(self.ds.Metres * self.ds.Metres + 4 * metres * metres))
num5 = 5 * metresPerSecond
num6 = 11 * metresPerSecond
num7 = (double2 - 5) * metresPerSecond
num8 = (double2 - 5) * metresPerSecond
num9 = (double2 + 21) * metresPerSecond
num10 = (double2 + 21) * metresPerSecond
num11 = 5 * metresPerSecond1
num12 = 11 * metresPerSecond1
num13 = num12 + r
num14 = num12 + 2 * r
num15 = num12 + 3 * r
num16 = num12 + 4 * r
num17 = num11 + 5 * r
num18 = num11 + 6 * r
num19 = (double2 + 6) * metresPerSecond1 + 4 * r
num20 = (double2 + 6) * metresPerSecond1 + 4 * r
num21 = num19 + 14 * metresPerSecond1
num22 = num19 + 14 * metresPerSecond1
num23 = num21 + r
num24 = num21 + 2 * r
num25 = num21 + 2 * r
num26 = num21 + 3 * r
num27 = num19 + 4 * r
num28 = num21 + 4 * r
r1 = 2 * metres + (double2 + 15) * metresPerSecond + (
double2 + 26 + 195 / self.R) * metresPerSecond1
num29 = 11 * metresPerSecond * math.cos(Unit.ConvertDegToRad(
20)) + metres * (1 + math.sin(Unit.ConvertDegToRad(20))) + (
double2 + 15) * metresPerSecond * math.tan(
Unit.ConvertDegToRad(5)) + (
double2 + 26 + 125 / self.R) * metresPerSecond1
self.ias = speed_0
self.wind = speed_1
self.isa = double_1
self.altitude = altitude_0
self.time = double_2
num30 = 1 if (orientationType_0 == OrientationType.Right) else -1
turnDirection = TurnDirection.Right if (
orientationType_0 == OrientationType.Right) else TurnDirection.Left
turnDirection1 = TurnDirection.Left if (
orientationType_0
== OrientationType.Right) else TurnDirection.Right
point3d36 = MathHelper.distanceBearingPoint(point3d_0, 0, 0)
point3d37 = MathHelper.distanceBearingPoint(
point3d36, Unit.ConvertDegToRad(double_0), num5)
point3d38 = MathHelper.distanceBearingPoint(
point3d36, Unit.ConvertDegToRad(double_0), num6)
point3d39 = MathHelper.distanceBearingPoint(
point3d38, Unit.ConvertDegToRad(double_0 + num30 * 90), metres)
point3d40 = MathHelper.distanceBearingPoint(
point3d39, Unit.ConvertDegToRad(double_0 + num30 * -45), metres)
point3d41 = MathHelper.distanceBearingPoint(
point3d39, Unit.ConvertDegToRad(double_0), metres)
point3d42 = MathHelper.distanceBearingPoint(
point3d39, Unit.ConvertDegToRad(double_0 + num30 * 45), metres)
point3d43 = MathHelper.distanceBearingPoint(
point3d39, Unit.ConvertDegToRad(double_0 + num30 * 90), metres)
point3d39 = MathHelper.distanceBearingPoint(
point3d37, Unit.ConvertDegToRad(double_0 + num30 * 90), metres)
MathHelper.distanceBearingPoint(
point3d39, Unit.ConvertDegToRad(double_0 + num30 * 90), metres)
point3d44 = MathHelper.distanceBearingPoint(
point3d39, Unit.ConvertDegToRad(double_0 + num30 * 135), metres)
point3d45 = MathHelper.distanceBearingPoint(
point3d39, Unit.ConvertDegToRad(double_0 + 180), metres)
point3d46 = MathHelper.distanceBearingPoint(
point3d43, Unit.ConvertDegToRad(double_0 + 180 - num30 * 5), num7)
point3d47 = MathHelper.distanceBearingPoint(
point3d43, Unit.ConvertDegToRad(double_0 + 180 - num30 * 5), num9)
point3d48 = MathHelper.distanceBearingPoint(
point3d43, Unit.ConvertDegToRad(double_0 + 180 + num30 * 5), num8)
point3d49 = MathHelper.distanceBearingPoint(
point3d43, Unit.ConvertDegToRad(double_0 + 180 + num30 * 5), num10)
point3d39 = MathHelper.distanceBearingPoint(
point3d47, Unit.ConvertDegToRad(double_0 - num30 * 90), metres)
point3d50 = MathHelper.distanceBearingPoint(
point3d39, Unit.ConvertDegToRad(double_0 + 180 - num30 * 45),
metres)
point3d51 = MathHelper.distanceBearingPoint(
point3d39, Unit.ConvertDegToRad(double_0 + 180), metres)
MathHelper.distanceBearingPoint(
point3d39, Unit.ConvertDegToRad(double_0 + num30 * 90), metres)
point3d39 = MathHelper.distanceBearingPoint(
point3d49, Unit.ConvertDegToRad(double_0 - num30 * 90), metres)
point3d52 = MathHelper.distanceBearingPoint(
point3d39, Unit.ConvertDegToRad(double_0 + 180), metres)
point3d53 = MathHelper.distanceBearingPoint(
point3d39, Unit.ConvertDegToRad(double_0 + 180 + num30 * 45),
metres)
point3d54 = MathHelper.distanceBearingPoint(
point3d39, Unit.ConvertDegToRad(double_0 - num30 * 90), metres)
point3d55 = MathHelper.distanceBearingPoint(
point3d48, Unit.ConvertDegToRad(double_0 - num30 * 90), metres * 2)
point3d, num = MathHelper.smethod_193(point3d38, num12, point3d40,
num13, point3d41, num14, False)
point3d1, num1 = MathHelper.smethod_193(point3d41, num14, point3d42,
num15, point3d43, num16, False)
point3d2, num2 = MathHelper.smethod_193(point3d43, num16, point3d44,
num17, point3d45, num18, False)
point3d3, num3 = MathHelper.smethod_193(point3d47, num21, point3d50,
num23, point3d51, num24, False)
point3d4, num4 = MathHelper.smethod_193(point3d52, num25, point3d53,
num26, point3d54, num28, False)
point3d56 = MathHelper.distanceBearingPoint(
point3d4, Unit.ConvertDegToRad(double_0 - num30 * 90), num4)
point3d57 = MathHelper.distanceBearingPoint(
point3d56, Unit.ConvertDegToRad(double_0 + num30 * 90), num29)
point3d58 = MathHelper.distanceBearingPoint(
point3d3, Unit.ConvertDegToRad(double_0 + 180), num3)
point3d58 = MathHelper.getIntersectionPoint(
point3d_0,
MathHelper.distanceBearingPoint(
point3d_0, Unit.ConvertDegToRad(double_0 + 180), 100),
point3d58,
MathHelper.distanceBearingPoint(
point3d58, Unit.ConvertDegToRad(double_0 + 90), 100))
point3d59 = MathHelper.distanceBearingPoint(
point3d4, Unit.ConvertDegToRad(double_0 + 180), num4)
point3d59 = MathHelper.getIntersectionPoint(
point3d_0,
MathHelper.distanceBearingPoint(
point3d_0, Unit.ConvertDegToRad(double_0 + 180), 100),
point3d59,
MathHelper.distanceBearingPoint(
point3d59, Unit.ConvertDegToRad(double_0 + 90), 100))
point3d5 = MathHelper.distanceBearingPoint(
point3d58, Unit.ConvertDegToRad(double_0),
r1) if (MathHelper.calcDistance(point3d_0, point3d58) >=
MathHelper.calcDistance(point3d_0, point3d59)
) else MathHelper.distanceBearingPoint(
point3d59, Unit.ConvertDegToRad(double_0), r1)
self.ptE = MathHelper.getIntersectionPoint(
point3d5,
MathHelper.distanceBearingPoint(
point3d5, Unit.ConvertDegToRad(double_0 + 90), 100), point3d57,
MathHelper.distanceBearingPoint(point3d57,
Unit.ConvertDegToRad(double_0),
100))
self.nominal = PolylineArea()
point3d56 = MathHelper.distanceBearingPoint(
point3d_0, Unit.ConvertDegToRad(double_0 + num30 * 90), 2 * metres)
point3d58 = MathHelper.distanceBearingPoint(
point3d56, Unit.ConvertDegToRad(double_0 + 180), self.ds.Metres)
point3d59 = MathHelper.distanceBearingPoint(
point3d58, Unit.ConvertDegToRad(double_0 - num30 * 90), 2 * metres)
self.nominal.Add(
PolylineAreaPoint(
point3d_0,
MathHelper.smethod_59(Unit.ConvertDegToRad(double_0),
point3d_0, point3d56)))
self.nominal.method_1(point3d56)
self.nominal.Add(
PolylineAreaPoint(
point3d58,
MathHelper.smethod_59(Unit.ConvertDegToRad(double_0 + 180),
point3d58, point3d59)))
self.nominal.method_1(point3d59)
self.nominal.method_1(point3d_0)
self.wd = Distance(MathHelper.calcDistance(point3d_0, point3d58))
self.area = PolylineArea()
point3dCollection = []
point3dCollection.append(
MathHelper.distanceBearingPoint(point3d,
Unit.ConvertDegToRad(double_0),
num))
point3dCollection.append(
MathHelper.distanceBearingPoint(point3d1,
Unit.ConvertDegToRad(double_0),
num1))
point3dCollection.append(
MathHelper.distanceBearingPoint(
point3d3, Unit.ConvertDegToRad(double_0 + num30 * 90), num3))
point3dCollection.append(
MathHelper.distanceBearingPoint(
point3d3, Unit.ConvertDegToRad(double_0 + 180), num3))
point3dCollection.append(
MathHelper.distanceBearingPoint(
point3d4, Unit.ConvertDegToRad(double_0 + 180), num4))
point3dCollection.append(
MathHelper.distanceBearingPoint(
point3d4, Unit.ConvertDegToRad(double_0 - num30 * 90), num4))
point3dCollection.append(
MathHelper.distanceBearingPoint(point3d55,
Unit.ConvertDegToRad(double_0),
num27))
point3d7, point3d8 = MathHelper.smethod_91(point3d3, num3, point3d4,
num4, turnDirection)
point3d9, point3d10 = MathHelper.smethod_91(point3d4, num4, point3d55,
num27, turnDirection)
point3d11, point3d12 = MathHelper.smethod_91(point3d4, num4, point3d,
num, turnDirection)
point3d13, point3d14 = MathHelper.smethod_91(point3d4, num4, point3d1,
num1, turnDirection)
point3d15, point3d16 = MathHelper.smethod_91(point3d4, num4, point3d3,
num3, turnDirection)
point3d17, point3d18 = MathHelper.smethod_91(point3d55, num27, point3d,
num, turnDirection)
point3d19, point3d20 = MathHelper.smethod_91(point3d55, num27,
point3d1, num1,
turnDirection)
point3d21, point3d22 = MathHelper.smethod_91(point3d55, num27,
point3d3, num3,
turnDirection)
point3d23, point3d6 = MathHelper.smethod_91(point3d, num, point3d1,
num1, turnDirection)
point3d24, point3d25 = MathHelper.smethod_91(point3d1, num1, point3d46,
num19, turnDirection)
point3d26, point3d27 = MathHelper.smethod_91(point3d46, num19,
point3d3, num3,
turnDirection)
point3d28, point3d29 = MathHelper.smethod_91(point3d43, num16,
point3d48, num20,
turnDirection1)
point3d30, point3d31 = MathHelper.smethod_91(point3d48, num20,
point3d49, num22,
turnDirection1)
if (num4 >= MathHelper.calcDistance(point3d4, point3d55) + num27):
self.area.method_1(point3d7)
self.area.method_3(
point3d8,
MathHelper.smethod_57(turnDirection, point3d8, point3d9,
point3d4))
self.area.method_1(point3d9)
if (num27 <= MathHelper.calcDistance(point3d55, point3d1) + num1):
flag = False
if (num27 < MathHelper.calcDistance(point3d55, point3d) + num):
point3d39 = MathHelper.distanceBearingPoint(
point3d18,
MathHelper.getBearing(point3d17, point3d18) +
1.5707963267949 * num30, 100)
flag = MathHelper.smethod_119(
point3d23, point3d18,
point3d39) if (turnDirection != TurnDirection.Right
) else MathHelper.smethod_115(
point3d23, point3d18, point3d39)
if (flag):
self.area.Add(
PolylineAreaPoint(
point3d10,
MathHelper.smethod_57(turnDirection, point3d10,
point3d17, point3d55)))
self.area.method_1(point3d17)
self.area.method_3(
point3d18,
MathHelper.smethod_57(turnDirection, point3d18,
point3d23, point3d))
self.area.method_3(
point3d23,
MathHelper.smethod_57(turnDirection, point3d23,
point3d24, point3d1))
self.area.method_1(point3d24)
else:
self.area.Add(
PolylineAreaPoint(
point3d10,
MathHelper.smethod_57(turnDirection, point3d10,
point3d19, point3d55)))
self.area.method_1(point3d19)
self.area.Add(
PolylineAreaPoint(
point3d20,
MathHelper.smethod_57(turnDirection, point3d20,
point3d24, point3d1)))
self.area.method_1(point3d24)
self.area.method_3(
point3d25,
MathHelper.smethod_57(turnDirection, point3d25, point3d26,
point3d46))
self.area.method_1(point3d26)
self.area.method_3(
point3d27,
MathHelper.smethod_57(turnDirection, point3d27, point3d7,
point3d3))
self.area.method_1(point3d7)
else:
self.area.method_3(
point3d10,
MathHelper.smethod_57(turnDirection, point3d10, point3d21,
point3d55))
self.area.method_1(point3d21)
self.area.method_3(
point3d22,
MathHelper.smethod_57(turnDirection, point3d22, point3d7,
point3d3))
self.area.method_1(point3d7)
elif (num4 <= MathHelper.calcDistance(point3d4, point3d1) + num1):
flag1 = False
if (num4 < MathHelper.calcDistance(point3d4, point3d) + num):
point3d39 = MathHelper.distanceBearingPoint(
point3d12,
MathHelper.getBearing(point3d11, point3d12) +
1.5707963267949 * num30, 100)
flag1 = MathHelper.smethod_119(
point3d23, point3d12,
point3d39) if (turnDirection != TurnDirection.Right
) else MathHelper.smethod_115(
point3d23, point3d12, point3d39)
if (flag1):
self.area.method_1(point3d7)
self.area.method_3(
point3d8,
MathHelper.smethod_57(turnDirection, point3d8, point3d11,
point3d4))
self.area.method_1(point3d11)
self.area.method_3(
point3d12,
MathHelper.smethod_57(turnDirection, point3d12, point3d23,
point3d))
self.area.method_3(
point3d23,
MathHelper.smethod_57(turnDirection, point3d23, point3d24,
point3d1))
self.area.method_1(point3d24)
else:
self.area.method_1(point3d7)
self.area.method_3(
point3d8,
MathHelper.smethod_57(turnDirection, point3d8, point3d13,
point3d4))
self.area.method_1(point3d13)
self.area.method_3(
point3d14,
MathHelper.smethod_57(turnDirection, point3d14, point3d24,
point3d1))
self.area.method_1(point3d24)
self.area.method_3(
point3d25,
MathHelper.smethod_57(turnDirection, point3d25, point3d26,
point3d46))
self.area.method_1(point3d26)
self.area.method_3(
point3d27,
MathHelper.smethod_57(turnDirection, point3d27, point3d7,
point3d3))
self.area.method_1(point3d7)
else:
self.area.method_1(point3d7)
self.area.method_3(
point3d8,
MathHelper.smethod_57(turnDirection, point3d8, point3d15,
point3d4))
self.area.method_1(point3d15)
self.area.method_3(
point3d16,
MathHelper.smethod_57(turnDirection, point3d16, point3d7,
point3d3))
self.area.method_1(point3d7)
self.outboundLineTop = PolylineArea()
self.outboundLineTop.method_1(point3d24)
self.outboundLineTop.method_3(
point3d25,
MathHelper.smethod_57(turnDirection, point3d25, point3d26,
point3d46))
# PolylineArea polylineArea = self.outboundLineTop;
point3dArray = [point3d26, point3d27]
self.outboundLineTop.method_7(point3dArray)
self.outboundLineBottom = PolylineArea()
self.outboundLineBottom.method_1(point3d28)
self.outboundLineBottom.method_3(
point3d29,
MathHelper.smethod_57(turnDirection1, point3d29, point3d30,
point3d48))
# PolylineArea polylineArea1 = self.outboundLineBottom;
point3dArray = [point3d30, point3d31]
self.outboundLineBottom.method_7(point3dArray)
self.spiral = PolylineArea()
if (MathHelper.calcDistance(point3d, point3d_0) <= num):
point3d32_39 = []
MathHelper.smethod_34(
point3d_0,
MathHelper.distanceBearingPoint(point3d_0,
Unit.ConvertDegToRad(double_0),
100), point3d, num,
point3d32_39)
point3d32 = point3d32_39[0]
point3d39 = point3d32_39[1]
point3d33 = MathHelper.distanceBearingPoint(
point3d, MathHelper.getBearing(point3d, point3d38), num)
self.spiral.Add(
PolylineAreaPoint(
point3d32,
MathHelper.smethod_57(turnDirection, point3d32, point3d33,
point3d)))
else:
point3d32, point3d33 = MathHelper.smethod_91(
point3d_0, 0, point3d, num, turnDirection)
self.spiral.method_1(point3d32)
point3d34, point3d35 = MathHelper.smethod_91(point3d, num, point3d1,
num1, turnDirection)
self.spiral.Add(
PolylineAreaPoint(
point3d33,
MathHelper.smethod_57(turnDirection, point3d33, point3d34,
point3d)))
point3d33 = point3d34
point3d34, point3d35 = MathHelper.smethod_91(point3d1, num1, point3d2,
num2, turnDirection)
self.spiral.Add(
PolylineAreaPoint(
point3d33,
MathHelper.smethod_57(turnDirection, point3d33, point3d34,
point3d1)))
point3d33 = point3d34
point3d39 = MathHelper.distanceBearingPoint(
point3d2, Unit.ConvertDegToRad(double_0 + 180), num2)
self.spiral.Add(
PolylineAreaPoint(
point3d33,
MathHelper.smethod_57(turnDirection, point3d33, point3d39,
point3d2)))
self.spiral.method_1(point3d39)
self.method_0(point3dCollection)
self.method_1(
MathHelper.distanceBearingPoint(point3d1,
Unit.ConvertDegToRad(double_0),
num1),
MathHelper.distanceBearingPoint(
point3d2, Unit.ConvertDegToRad(double_0 + num30 * 90), num2),
MathHelper.distanceBearingPoint(
point3d2, Unit.ConvertDegToRad(double_0 + 180), num2))
point3d56 = MathHelper.distanceBearingPoint(
point3d_0, Unit.ConvertDegToRad(double_0 + 180), 1000)
point3d39 = MathHelper.getIntersectionPoint(point3d_0, point3d56,
point3d7, point3d8)
point3d6_58 = []
MathHelper.smethod_34(point3d_0, point3d56, point3d3, num3,
point3d6_58)
point3d6 = point3d6_58[0]
point3d58 = point3d6_58[1]
point3d6_59 = []
MathHelper.smethod_34(point3d_0, point3d56, point3d4, num4,
point3d6_59)
point3d6 = point3d6_59[0]
point3d59 = point3d6_59[1]
if (orientationType_0 == OrientationType.Right):
if (not MathHelper.smethod_119(point3d39, point3d3, point3d7) or
not MathHelper.smethod_115(point3d39, point3d4, point3d8)):
self.ptC = point3d58 if (MathHelper.calcDistance(
point3d_0, point3d58) > MathHelper.calcDistance(
point3d_0, point3d59)) else point3d59
else:
self.ptC = point3d39
elif (not MathHelper.smethod_115(point3d39, point3d3, point3d7)
or not MathHelper.smethod_119(point3d39, point3d4, point3d8)):
self.ptC = point3d58 if (
MathHelper.calcDistance(point3d_0, point3d58) >
MathHelper.calcDistance(point3d_0, point3d59)) else point3d59
else:
self.ptC = point3d39
num31 = MathHelper.calcDistance(self.ptC, point3d43)
point3d60 = MathHelper.distanceBearingPoint(
self.ptC,
MathHelper.getBearing(self.ptC, point3d43) +
math.asin(num16 / num31) * num30,
math.sqrt(num31 * num31 - num16 * num16))
point3d6_58 = []
MathHelper.smethod_34(self.ptC, point3d60, point3d1, num1, point3d6_58)
point3d6 = point3d6_58[0]
point3d58 = point3d6_58[1]
point3d6_59 = []
MathHelper.smethod_34(self.ptC, point3d60, point3d2, num2, point3d6_59)
point3d6 = point3d6_59[0]
point3d59 = point3d6_59[1]
self.ptR = point3d58 if (
MathHelper.calcDistance(self.ptC, point3d58) >
MathHelper.calcDistance(self.ptC, point3d59)) else point3d59
def get_outboundLineBottom(self):
return self.outboundLineBottom
OutboundLineBottom = property(get_outboundLineBottom, None, None, None)
def get_outboundLineTop(self):
return self.outboundLineTop
OutboundLineTop = property(get_outboundLineTop, None, None, None)
def method_34(self):
point3dCollection_0 = None
point3dCollection_1 = None
polylineArea_0 = None
polylineArea_1 = None
polylineArea_2 = None
point3d = self.parametersPanel.pnlRwyStart.Point3d
point3d1 = self.parametersPanel.pnlDer.Point3d
num = MathHelper.getBearing(point3d, point3d1)
num1 = MathHelper.smethod_4(num + 3.14159265358979)
num2 = MathHelper.smethod_4(num - 1.5707963267949)
num3 = MathHelper.smethod_4(num + 1.5707963267949)
percent = float(self.parametersPanel.txtPdg.text()) / 100
metres = Altitude(
float(self.parametersPanel.txtTurningAltitude.text()),
AltitudeUnits.FT).Metres
metres1 = Altitude(
float(self.parametersPanel.txtNextSegmentAltitude.text()),
AltitudeUnits.FT).Metres
num4 = 45 if (self.parametersPanel.chbCatH.isChecked()) else 150
num5 = MathHelper.calcDistance(point3d, point3d1)
if (num5 < 10):
QMessageBox.warning(self, "Warning",
Messages.ERR_POSITIONS_TOO_CLOSE)
return (False, None, None, None, None, None)
if (not self.parametersPanel.chbTurnsBeforeDer.isChecked()):
point3dCollection_0 = None
else:
point3d2 = point3d if (self.parametersPanel.chbCatH.isChecked()
) else MathHelper.distanceBearingPoint(
point3d, num, min([600, num5]))
if (MathHelper.smethod_103(point3d2, point3d1, 0.1)):
point3dCollection_0 = None
else:
point3dCollection_0 = []
point3dCollection_0.append(
MathHelper.distanceBearingPoint(point3d2, num2, num4))
point3dCollection_0.append(
MathHelper.distanceBearingPoint(point3d1, num2, num4))
point3dCollection_0.append(
MathHelper.distanceBearingPoint(point3d1, num3, num4))
point3dCollection_0.append(
MathHelper.distanceBearingPoint(point3d2, num3, num4))
num6 = (
(Altitude(float(
self.parametersPanel.txtMinTurnHeight_CATH.text())).Metres if
(self.parametersPanel.chbCatH.isChecked()) else Altitude(
float(self.parametersPanel.txtMinTurnHeight.text())).Metres) -
5) / percent
z = (metres - point3d1.get_Z() - 5) / percent
num7 = Unit.ConvertDegToRad(15)
num8 = Unit.ConvertDegToRad(30)
point3d3 = MathHelper.distanceBearingPoint(point3d1, num2, num4)
point3d4 = MathHelper.distanceBearingPoint(point3d1, num3, num4)
point3d5 = MathHelper.distanceBearingPoint(point3d3, num - num7,
num6 / math.cos(num7))
point3d6 = MathHelper.distanceBearingPoint(point3d4, num + num7,
num6 / math.cos(num7))
point3d7 = MathHelper.distanceBearingPoint(point3d5, num - num8,
(z - num6) / math.cos(num8))
point3d8 = MathHelper.distanceBearingPoint(point3d6, num + num8,
(z - num6) / math.cos(num8))
point3dCollection_1 = []
point3dArray = [
point3d3, point3d5, point3d7, point3d8, point3d6, point3d4
]
point3dCollection_1.extend(point3dArray)
z1 = (metres1 - point3d1.get_Z() - 5) / percent
point3d9 = point3d if (self.parametersPanel.chbCatH.isChecked()
) else MathHelper.distanceBearingPoint(
point3d, num, min([600, num5]))
polylineArea_0 = PolylineArea(None, point3d9.smethod_167(0), z1)
point3d10 = MathHelper.distanceBearingPoint(point3d9, num1, z1)
point3d11 = MathHelper.distanceBearingPoint(point3d9, num, z1)
polylineArea_1 = PolylineArea()
polylineArea_1.method_3(
point3d10,
MathHelper.smethod_57(TurnDirection.Right, point3d10, point3d11,
point3d9))
polylineArea_1.method_1(point3d11)
if (point3dCollection_0 != None):
item = [
point3d1, point3dCollection_0[1], point3dCollection_0[0],
point3d9
]
polylineArea_1.method_7(item)
polylineArea_2 = PolylineArea()
polylineArea_2.method_3(
point3d10,
MathHelper.smethod_57(TurnDirection.Left, point3d10, point3d11,
point3d9))
polylineArea_2.method_1(point3d11)
if (point3dCollection_0 != None):
item1 = [
point3d1, point3dCollection_0[2], point3dCollection_0[3],
point3d9
]
polylineArea_2.method_7(item1)
return (True, point3dCollection_0, point3dCollection_1, polylineArea_0,
polylineArea_1, polylineArea_2)