def _pEqn(rho, thermo, UEqn, nNonOrthCorr, psi, U, mesh, phi, p,
cumulativeContErr):
from Foam.finiteVolume import volScalarField
rUA = 1.0 / UEqn.A()
U.ext_assign(rUA * UEqn.H())
from Foam import fvc
from Foam.finiteVolume import surfaceScalarField
from Foam.OpenFOAM import word
phid = surfaceScalarField(
word("phid"),
fvc.interpolate(thermo.psi()) *
((fvc.interpolate(U) & mesh.Sf()) + fvc.ddtPhiCorr(rUA, rho, U, phi)))
for nonOrth in range(nNonOrthCorr + 1):
from Foam import fvm
pEqn = (fvm.ddt(psi, p) + fvm.div(phid, word("div(phid,p)")) -
fvm.laplacian(rho * rUA, p))
pEqn.solve()
if (nonOrth == nNonOrthCorr):
phi.ext_assign(pEqn.flux())
pass
pass
from Foam.finiteVolume.cfdTools.compressible import rhoEqn
rhoEqn(rho, phi)
from Foam.finiteVolume.cfdTools.compressible import compressibleContinuityErrs
cumulativeContErr = compressibleContinuityErrs(rho, thermo,
cumulativeContErr)
U.ext_assign(U - rUA * fvc.grad(p))
U.correctBoundaryConditions()
return cumulativeContErr
def _pEqn( rho, thermo, UEqn, nNonOrthCorr, psi, U, mesh, phi, p, cumulativeContErr ):
from Foam.finiteVolume import volScalarField
rUA = 1.0/UEqn.A()
U.ext_assign( rUA*UEqn.H() )
from Foam import fvc
from Foam.finiteVolume import surfaceScalarField
from Foam.OpenFOAM import word
phid = surfaceScalarField( word( "phid" ),
fvc.interpolate( thermo.psi() ) * ( (fvc.interpolate( U ) & mesh.Sf() ) + fvc.ddtPhiCorr( rUA, rho, U, phi ) ) )
for nonOrth in range( nNonOrthCorr + 1 ) :
from Foam import fvm
pEqn = ( fvm.ddt(psi, p) + fvm.div(phid, word( "div(phid,p)" ) ) - fvm.laplacian(rho*rUA, p) )
pEqn.solve()
if (nonOrth == nNonOrthCorr) :
phi.ext_assign( pEqn.flux() )
pass
pass
from Foam.finiteVolume.cfdTools.compressible import rhoEqn
rhoEqn( rho, phi )
from Foam.finiteVolume.cfdTools.compressible import compressibleContinuityErrs
cumulativeContErr = compressibleContinuityErrs( rho, thermo, cumulativeContErr )
U.ext_assign( U - rUA * fvc.grad(p) )
U.correctBoundaryConditions()
return cumulativeContErr
def _pEqn( runTime, mesh, UEqn, thermo, p, psi, U, rho, phi, DpDt, g, initialMass, totalVolume, corr, nCorr, nNonOrthCorr, cumulativeContErr ):
closedVolume = p.needReference()
rho.ext_assign( thermo.rho() )
# Thermodynamic density needs to be updated by psi*d(p) after the
# pressure solution - done in 2 parts. Part 1:
thermo.rho().ext_assign( thermo.rho() - psi * p )
rUA = 1.0/UEqn.A()
from Foam.OpenFOAM import word
from Foam.finiteVolume import surfaceScalarField
from Foam import fvc
rhorUAf = surfaceScalarField( word( "(rho*(1|A(U)))" ), fvc.interpolate( rho * rUA ) )
U.ext_assign( rUA * UEqn.H() )
phiU = fvc.interpolate( rho ) * ( (fvc.interpolate( U ) & mesh.Sf() ) + fvc.ddtPhiCorr( rUA, rho, U, phi ) )
phi.ext_assign( phiU + rhorUAf * fvc.interpolate( rho ) * (g & mesh.Sf() ) )
for nonOrth in range( nNonOrthCorr+1 ):
from Foam import fvm
from Foam.finiteVolume import correction
pEqn = fvc.ddt( rho ) + psi * correction( fvm.ddt( p ) ) + fvc.div( phi ) - fvm.laplacian( rhorUAf, p )
if corr == nCorr-1 and nonOrth == nNonOrthCorr:
pEqn.solve( mesh.solver( word( str( p.name() ) + "Final" ) ) )
pass
else:
pEqn.solve( mesh.solver( p.name() ) )
pass
if nonOrth == nNonOrthCorr:
phi.ext_assign( phi + pEqn.flux() )
pass
# Second part of thermodynamic density update
thermo.rho().ext_assign( thermo.rho() + psi * p )
U.ext_assign( U + rUA * fvc.reconstruct( ( phi - phiU ) / rhorUAf ) )
U.correctBoundaryConditions()
DpDt.ext_assign( fvc.DDt( surfaceScalarField( word( "phiU" ), phi / fvc.interpolate( rho ) ), p ) )
from Foam.finiteVolume.cfdTools.compressible import rhoEqn
rhoEqn( rho, phi )
from Foam.finiteVolume.cfdTools.compressible import compressibleContinuityErrs
cumulativeContErr = compressibleContinuityErrs( rho, thermo, cumulativeContErr )
# For closed-volume cases adjust the pressure and density levels
# to obey overall mass continuity
if closedVolume:
p.ext_assign( p + ( initialMass - fvc.domainIntegrate( psi * p ) ) / fvc.domainIntegrate( psi ) )
thermo.rho().ext_assign( psi * p )
rho.ext_assign( rho + ( initialMass - fvc.domainIntegrate( rho ) ) / totalVolume )
pass
return cumulativeContErr
def _pEqn(rho, thermo, UEqn, nNonOrthCorr, psi, U, mesh, phi, p, DpDt,
cumulativeContErr, corr, nCorr, nOuterCorr, transonic):
rho.ext_assign(thermo.rho())
rUA = 1.0 / UEqn.A()
U.ext_assign(rUA * UEqn.H())
from Foam import fvc, fvm
from Foam.OpenFOAM import word
from Foam.finiteVolume import surfaceScalarField
if transonic:
phid = surfaceScalarField(
word("phid"),
fvc.interpolate(psi) * ((fvc.interpolate(U) & mesh.Sf()) +
fvc.ddtPhiCorr(rUA, rho, U, phi)))
for nonOrth in range(nNonOrthCorr + 1):
pEqn = fvm.ddt(psi, p) + fvm.div(phid, p) - fvm.laplacian(
rho * rUA, p)
pEqn.solve()
if nonOrth == nNonOrthCorr:
phi == pEqn.flux()
pass
pass
pass
else:
phi.ext_assign(
fvc.interpolate(rho) * ((fvc.interpolate(U) & mesh.Sf()) +
fvc.ddtPhiCorr(rUA, rho, U, phi)))
for nonOrth in range(nNonOrthCorr + 1):
pEqn = fvm.ddt(psi, p) + fvc.div(phi) - fvm.laplacian(rho * rUA, p)
pEqn.solve()
if nonOrth == nNonOrthCorr:
phi.ext_assign(phi + pEqn.flux())
pass
pass
pass
from Foam.finiteVolume.cfdTools.compressible import rhoEqn
rhoEqn(rho, phi)
from Foam.finiteVolume.cfdTools.compressible import compressibleContinuityErrs
cumulativeContErr = compressibleContinuityErrs(rho, thermo,
cumulativeContErr)
U.ext_assign(U - rUA * fvc.grad(p))
U.correctBoundaryConditions()
DpDt.ext_assign(
fvc.DDt(surfaceScalarField(word("phiU"), phi / fvc.interpolate(rho)),
p))
return cumulativeContErr
def fun_pEqn( mesh, p, rho, psi, p_rgh, U, phi, ghf, gh, DpDt, UEqn, thermo, nNonOrthCorr, corr, nCorr, finalIter, cumulativeContErr ):
rho.ext_assign( thermo.rho() )
# Thermodynamic density needs to be updated by psi*d(p) after the
# pressure solution - done in 2 parts. Part 1:
thermo.rho().ext_assign( thermo.rho() - psi * p_rgh )
rUA = 1.0 / UEqn.A()
from Foam.finiteVolume import surfaceScalarField
from Foam.OpenFOAM import word
from Foam import fvc
rhorUAf = surfaceScalarField( word( "(rho*(1|A(U)))" ), fvc.interpolate( rho * rUA ) )
U.ext_assign( rUA*UEqn.H() )
phi.ext_assign( fvc.interpolate( rho ) * ( ( fvc.interpolate( U ) & mesh.Sf() ) + fvc.ddtPhiCorr( rUA, rho, U, phi ) ) )
buoyancyPhi = -rhorUAf * ghf * fvc.snGrad( rho ) * mesh.magSf()
phi.ext_assign( phi + buoyancyPhi )
from Foam import fvm
from Foam.finiteVolume import correction
for nonOrth in range( nNonOrthCorr +1 ):
p_rghEqn = fvc.ddt( rho ) + psi * correction( fvm.ddt( p_rgh ) ) + fvc.div( phi ) - fvm.laplacian( rhorUAf, p_rgh )
p_rghEqn.solve( mesh.solver( p_rgh.select( ( finalIter and corr == nCorr-1 and nonOrth == nNonOrthCorr ) ) ) )
if nonOrth == nNonOrthCorr:
# Calculate the conservative fluxes
phi.ext_assign( phi + p_rghEqn.flux() )
# Explicitly relax pressure for momentum corrector
p_rgh.relax()
# Correct the momentum source with the pressure gradient flux
# calculated from the relaxed pressure
U.ext_assign( U + rUA * fvc.reconstruct( ( buoyancyPhi + p_rghEqn.flux() ) / rhorUAf ) )
U.correctBoundaryConditions()
pass
p.ext_assign( p_rgh + rho * gh )
# Second part of thermodynamic density update
thermo.rho().ext_assign( thermo.rho() + psi * p_rgh )
DpDt.ext_assign( fvc.DDt( surfaceScalarField( word( "phiU" ), phi / fvc.interpolate( rho ) ), p ) )
from Foam.finiteVolume.cfdTools.compressible import rhoEqn
rhoEqn( rho, phi )
from Foam.finiteVolume.cfdTools.compressible import compressibleContinuityErrs
cumulativeContErr = compressibleContinuityErrs( rho, thermo, cumulativeContErr )
return cumulativeContErr
def _pEqn( rho, thermo, UEqn, nNonOrthCorr, psi, U, mesh, phi, p, DpDt, cumulativeContErr, corr, nCorr, nOuterCorr, transonic ):
rho.ext_assign( thermo.rho() )
rUA = 1.0/UEqn.A()
U.ext_assign( rUA * UEqn.H() )
from Foam import fvc, fvm
from Foam.OpenFOAM import word
from Foam.finiteVolume import surfaceScalarField
if transonic:
phid = surfaceScalarField( word( "phid" ),
fvc.interpolate( psi ) * ( ( fvc.interpolate( U ) & mesh.Sf() ) + fvc.ddtPhiCorr( rUA, rho, U, phi ) ) )
for nonOrth in range( nNonOrthCorr + 1 ) :
pEqn = fvm.ddt( psi, p ) + fvm.div( phid, p ) - fvm.laplacian( rho * rUA, p )
pEqn.solve()
if nonOrth == nNonOrthCorr:
phi == pEqn.flux()
pass
pass
pass
else:
phi.ext_assign( fvc.interpolate( rho ) * ( ( fvc.interpolate(U) & mesh.Sf() ) + fvc.ddtPhiCorr( rUA, rho, U, phi ) ) )
for nonOrth in range( nNonOrthCorr + 1 ) :
pEqn = fvm.ddt( psi, p ) + fvc.div( phi ) - fvm.laplacian( rho * rUA, p )
pEqn.solve()
if nonOrth == nNonOrthCorr:
phi.ext_assign( phi + pEqn.flux() )
pass
pass
pass
from Foam.finiteVolume.cfdTools.compressible import rhoEqn
rhoEqn( rho, phi )
from Foam.finiteVolume.cfdTools.compressible import compressibleContinuityErrs
cumulativeContErr = compressibleContinuityErrs( rho, thermo, cumulativeContErr )
U.ext_assign( U - rUA * fvc.grad( p ) )
U.correctBoundaryConditions()
DpDt.ext_assign( fvc.DDt( surfaceScalarField( word( "phiU" ), phi / fvc.interpolate( rho ) ), p ) )
return cumulativeContErr
def fun_pEqn(mesh, thermo, p, rho, psi, U, phi, DpDt, pMin, UEqn, mrfZones,
nNonOrthCorr, nCorr, oCorr, nOuterCorr, corr, transonic,
cumulativeContErr):
rho.ext_assign(thermo.rho())
rUA = 1.0 / UEqn.A()
U.ext_assign(rUA * UEqn.H())
if nCorr <= 1:
UEqn.clear()
pass
if transonic:
from Foam.finiteVolume import surfaceScalarField
from Foam.OpenFOAM import word
phid = surfaceScalarField(
word("phid"),
fvc.interpolate(psi) * ((fvc.interpolate(U) & mesh.Sf()) +
fvc.ddtPhiCorr(rUA, rho, U, phi)))
mrfZones.relativeFlux(fvc.interpolate(psi), phid)
from Foam import fvm
for nonOrth in range(nNonOrthCorr + 1):
pEqn = fvm.ddt(psi, p) + fvm.div(phid, p) - fvm.laplacian(
rho * rUA, p)
if oCorr == (nOuterCorr - 1) and (corr == nCorr -
1) and (nonOrth == nNonOrthCorr):
from Foam.OpenFOAM import word
pEqn.solve(mesh.solver(word("pFinal")))
pass
else:
pEqn.solve()
pass
if nonOrth == nNonOrthCorr:
phi == pEqn.flux()
pass
else:
from Foam import fvc
phi.ext_assign(
fvc.interpolate(rho) * ((fvc.interpolate(U) & mesh.Sf())))
mrfZones.relativeFlux(fvc.interpolate(rho), phi)
from Foam import fvm
for nonOrth in range(nNonOrthCorr + 1):
# Pressure corrector
pEqn = fvm.ddt(psi, p) + fvc.div(phi) - fvm.laplacian(rho * rUA, p)
if oCorr == (nOuterCorr - 1) and corr == (
nCorr - 1) and nonOrth == nNonOrthCorr:
from Foam.OpenFOAM import word
pEqn.solve(mesh.solver(word("pFinal")))
pass
else:
pEqn.solve()
pass
if nonOrth == nNonOrthCorr:
phi.ext_assign(phi + pEqn.flux())
pass
pass
from Foam.finiteVolume.cfdTools.compressible import rhoEqn
rhoEqn(rho, phi)
from Foam.finiteVolume.cfdTools.compressible import compressibleContinuityErrs
cumulativeContErr = compressibleContinuityErrs(rho, thermo,
cumulativeContErr)
# Explicitly relax pressure for momentum corrector
p.relax()
rho.ext_assign(thermo.rho())
rho.relax()
from Foam.OpenFOAM import ext_Info, nl
ext_Info() << "rho max/min : " << rho.ext_max().value(
) << " " << rho.ext_min().value() << nl
U.ext_assign(U - rUA * fvc.grad(p))
U.correctBoundaryConditions()
from Foam.finiteVolume import surfaceScalarField
from Foam.OpenFOAM import word
DpDt.ext_assign(
fvc.DDt(surfaceScalarField(word("phiU"), phi / fvc.interpolate(rho)),
p))
from Foam.finiteVolume import bound
bound(p, pMin)
pass
def _pEqn(
rho,
thermo,
UEqn,
nNonOrthCorr,
psi,
U,
mesh,
phi,
p,
DpDt,
pMin,
corr,
cumulativeContErr,
nCorr,
oCorr,
nOuterCorr,
transonic,
):
rho.ext_assign(thermo.rho())
rUA = 1.0 / UEqn.A()
U.ext_assign(rUA * UEqn.H())
if nCorr <= 1:
UEqn.clear()
pass
from Foam import fvc, fvm
from Foam.OpenFOAM import word
from Foam.finiteVolume import surfaceScalarField
if transonic:
phid = surfaceScalarField(
word("phid"), fvc.interpolate(psi) * ((fvc.interpolate(U) & mesh.Sf()) + fvc.ddtPhiCorr(rUA, rho, U, phi))
)
for nonOrth in range(nNonOrthCorr + 1):
pEqn = fvm.ddt(psi, p) + fvm.div(phid, p) - fvm.laplacian(rho * rUA, p)
if oCorr == nOuterCorr - 1 and corr == nCorr - 1 and nonOrth == nNonOrthCorr:
pEqn.solve(mesh.solver(word("pFinal")))
pass
else:
pEqn.solve()
pass
if nonOrth == nNonOrthCorr:
phi == pEqn.flux()
pass
pass
pass
else:
phi.ext_assign(fvc.interpolate(rho) * ((fvc.interpolate(U) & mesh.Sf())))
for nonOrth in range(nNonOrthCorr + 1):
# Pressure corrector
pEqn = fvm.ddt(psi, p) + fvc.div(phi) - fvm.laplacian(rho * rUA, p)
if oCorr == nOuterCorr - 1 and corr == nCorr - 1 and nonOrth == nNonOrthCorr:
pEqn.solve(mesh.solver(word("pFinal")))
pass
else:
pEqn.solve()
pass
if nonOrth == nNonOrthCorr:
phi.ext_assign(phi + pEqn.flux())
pass
pass
pass
from Foam.finiteVolume.cfdTools.compressible import rhoEqn
rhoEqn(rho, phi)
from Foam.finiteVolume.cfdTools.compressible import compressibleContinuityErrs
cumulativeContErr = compressibleContinuityErrs(rho, thermo, cumulativeContErr)
p.relax()
rho.ext_assign(thermo.rho())
rho.relax()
from Foam.OpenFOAM import ext_Info, nl
ext_Info() << "rho max/min : " << rho.ext_max().value() << " " << rho.ext_min().value() << nl
U.ext_assign(U - rUA * fvc.grad(p))
U.correctBoundaryConditions()
DpDt.ext_assign(fvc.DDt(surfaceScalarField(word("phiU"), phi / fvc.interpolate(rho)), p))
from Foam.finiteVolume import bound
bound(p, pMin)
return cumulativeContErr
def _pEqn(runTime, mesh, UEqn, thermo, p, psi, U, rho, phi, DpDt, g,
initialMass, totalVolume, corr, nCorr, nNonOrthCorr,
cumulativeContErr):
closedVolume = p.needReference()
rho.ext_assign(thermo.rho())
# Thermodynamic density needs to be updated by psi*d(p) after the
# pressure solution - done in 2 parts. Part 1:
thermo.rho().ext_assign(thermo.rho() - psi * p)
rUA = 1.0 / UEqn.A()
from Foam.OpenFOAM import word
from Foam.finiteVolume import surfaceScalarField
from Foam import fvc
rhorUAf = surfaceScalarField(word("(rho*(1|A(U)))"),
fvc.interpolate(rho * rUA))
U.ext_assign(rUA * UEqn.H())
phiU = fvc.interpolate(rho) * (
(fvc.interpolate(U) & mesh.Sf()) + fvc.ddtPhiCorr(rUA, rho, U, phi))
phi.ext_assign(phiU + rhorUAf * fvc.interpolate(rho) * (g & mesh.Sf()))
for nonOrth in range(nNonOrthCorr + 1):
from Foam import fvm
from Foam.finiteVolume import correction
pEqn = fvc.ddt(rho) + psi * correction(
fvm.ddt(p)) + fvc.div(phi) - fvm.laplacian(rhorUAf, p)
if corr == nCorr - 1 and nonOrth == nNonOrthCorr:
pEqn.solve(mesh.solver(word(str(p.name()) + "Final")))
pass
else:
pEqn.solve(mesh.solver(p.name()))
pass
if nonOrth == nNonOrthCorr:
phi.ext_assign(phi + pEqn.flux())
pass
# Second part of thermodynamic density update
thermo.rho().ext_assign(thermo.rho() + psi * p)
U.ext_assign(U + rUA * fvc.reconstruct((phi - phiU) / rhorUAf))
U.correctBoundaryConditions()
DpDt.ext_assign(
fvc.DDt(surfaceScalarField(word("phiU"), phi / fvc.interpolate(rho)),
p))
from Foam.finiteVolume.cfdTools.compressible import rhoEqn
rhoEqn(rho, phi)
from Foam.finiteVolume.cfdTools.compressible import compressibleContinuityErrs
cumulativeContErr = compressibleContinuityErrs(rho, thermo,
cumulativeContErr)
# For closed-volume cases adjust the pressure and density levels
# to obey overall mass continuity
if closedVolume:
p.ext_assign(p + (initialMass - fvc.domainIntegrate(psi * p)) /
fvc.domainIntegrate(psi))
thermo.rho().ext_assign(psi * p)
rho.ext_assign(rho +
(initialMass - fvc.domainIntegrate(rho)) / totalVolume)
pass
return cumulativeContErr
def fun_pEqn(mesh, p, rho, psi, p_rgh, U, phi, ghf, gh, DpDt, UEqn, thermo,
nNonOrthCorr, corr, nCorr, finalIter, cumulativeContErr):
rho.ext_assign(thermo.rho())
# Thermodynamic density needs to be updated by psi*d(p) after the
# pressure solution - done in 2 parts. Part 1:
thermo.rho().ext_assign(thermo.rho() - psi * p_rgh)
rUA = 1.0 / UEqn.A()
from Foam.finiteVolume import surfaceScalarField
from Foam.OpenFOAM import word
from Foam import fvc
rhorUAf = surfaceScalarField(word("(rho*(1|A(U)))"),
fvc.interpolate(rho * rUA))
U.ext_assign(rUA * UEqn.H())
phi.ext_assign(
fvc.interpolate(rho) *
((fvc.interpolate(U) & mesh.Sf()) + fvc.ddtPhiCorr(rUA, rho, U, phi)))
buoyancyPhi = -rhorUAf * ghf * fvc.snGrad(rho) * mesh.magSf()
phi.ext_assign(phi + buoyancyPhi)
from Foam import fvm
from Foam.finiteVolume import correction
for nonOrth in range(nNonOrthCorr + 1):
p_rghEqn = fvc.ddt(rho) + psi * correction(
fvm.ddt(p_rgh)) + fvc.div(phi) - fvm.laplacian(rhorUAf, p_rgh)
p_rghEqn.solve(
mesh.solver(
p_rgh.select((finalIter and corr == nCorr - 1
and nonOrth == nNonOrthCorr))))
if nonOrth == nNonOrthCorr:
# Calculate the conservative fluxes
phi.ext_assign(phi + p_rghEqn.flux())
# Explicitly relax pressure for momentum corrector
p_rgh.relax()
# Correct the momentum source with the pressure gradient flux
# calculated from the relaxed pressure
U.ext_assign(U + rUA * fvc.reconstruct(
(buoyancyPhi + p_rghEqn.flux()) / rhorUAf))
U.correctBoundaryConditions()
pass
p.ext_assign(p_rgh + rho * gh)
# Second part of thermodynamic density update
thermo.rho().ext_assign(thermo.rho() + psi * p_rgh)
DpDt.ext_assign(
fvc.DDt(surfaceScalarField(word("phiU"), phi / fvc.interpolate(rho)),
p))
from Foam.finiteVolume.cfdTools.compressible import rhoEqn
rhoEqn(rho, phi)
from Foam.finiteVolume.cfdTools.compressible import compressibleContinuityErrs
cumulativeContErr = compressibleContinuityErrs(rho, thermo,
cumulativeContErr)
return cumulativeContErr
