def __init__(self, parent=None):
ObjectUI.__init__(self,
title='Excellon Object',
icon_file='share/drill32.png',
parent=parent)
#### Plot options ####
self.plot_options_label = QtWidgets.QLabel("<b>Plot Options:</b>")
self.custom_box.addWidget(self.plot_options_label)
grid0 = QtWidgets.QGridLayout()
self.custom_box.addLayout(grid0)
self.plot_cb = FCCheckBox(label='Plot')
self.plot_cb.setToolTip("Plot (show) this object.")
grid0.addWidget(self.plot_cb, 0, 0)
self.solid_cb = FCCheckBox(label='Solid')
self.solid_cb.setToolTip("Solid circles.")
grid0.addWidget(self.solid_cb, 0, 1)
#### Tools ####
self.tools_table_label = QtWidgets.QLabel('<b>Tools</b>')
self.tools_table_label.setToolTip("Tools in this Excellon object.")
self.custom_box.addWidget(self.tools_table_label)
self.tools_table = QtWidgets.QTableWidget()
self.tools_table.setFixedHeight(100)
self.custom_box.addWidget(self.tools_table)
#### Create CNC Job ####
self.cncjob_label = QtWidgets.QLabel('<b>Create CNC Job</b>')
self.cncjob_label.setToolTip("Create a CNC Job object\n"
"for this drill object.")
self.custom_box.addWidget(self.cncjob_label)
grid1 = QtWidgets.QGridLayout()
self.custom_box.addLayout(grid1)
cutzlabel = QtWidgets.QLabel('Cut Z:')
cutzlabel.setToolTip("Drill depth (negative)\n"
"below the copper surface.")
grid1.addWidget(cutzlabel, 0, 0)
self.cutz_entry = LengthEntry()
grid1.addWidget(self.cutz_entry, 0, 1)
travelzlabel = QtWidgets.QLabel('Travel Z:')
travelzlabel.setToolTip("Tool height when travelling\n"
"across the XY plane.")
grid1.addWidget(travelzlabel, 1, 0)
self.travelz_entry = LengthEntry()
grid1.addWidget(self.travelz_entry, 1, 1)
frlabel = QtWidgets.QLabel('Feed rate:')
frlabel.setToolTip("Tool speed while drilling\n"
"(in units per minute).")
grid1.addWidget(frlabel, 2, 0)
self.feedrate_entry = LengthEntry()
grid1.addWidget(self.feedrate_entry, 2, 1)
# Tool change:
toolchlabel = QtWidgets.QLabel("Tool change:")
toolchlabel.setToolTip("Include tool-change sequence\n"
"in G-Code (Pause for tool change).")
self.toolchange_cb = FCCheckBox()
grid1.addWidget(toolchlabel, 3, 0)
grid1.addWidget(self.toolchange_cb, 3, 1)
# Tool change Z:
toolchzlabel = QtWidgets.QLabel("Tool change Z:")
toolchzlabel.setToolTip("Z-axis position (height) for\n"
"tool change.")
grid1.addWidget(toolchzlabel, 4, 0)
self.toolchangez_entry = LengthEntry()
grid1.addWidget(self.toolchangez_entry, 4, 1)
self.ois_tcz = OptionalInputSection(self.toolchange_cb,
[self.toolchangez_entry])
# Spindlespeed
spdlabel = QtWidgets.QLabel('Spindle speed:')
spdlabel.setToolTip("Speed of the spindle\n" "in RPM (optional)")
grid1.addWidget(spdlabel, 5, 0)
self.spindlespeed_entry = IntEntry(allow_empty=True)
grid1.addWidget(self.spindlespeed_entry, 5, 1)
choose_tools_label = QtWidgets.QLabel(
"Select from the tools section above\n"
"the tools you want to include.")
self.custom_box.addWidget(choose_tools_label)
self.generate_cnc_button = QtWidgets.QPushButton('Generate')
self.generate_cnc_button.setToolTip("Generate the CNC Job.")
self.custom_box.addWidget(self.generate_cnc_button)
#### Milling Holes ####
self.mill_hole_label = QtWidgets.QLabel('<b>Mill Holes</b>')
self.mill_hole_label.setToolTip("Create Geometry for milling holes.")
self.custom_box.addWidget(self.mill_hole_label)
grid1 = QtWidgets.QGridLayout()
self.custom_box.addLayout(grid1)
tdlabel = QtWidgets.QLabel('Tool dia:')
tdlabel.setToolTip("Diameter of the cutting tool.")
grid1.addWidget(tdlabel, 0, 0)
self.tooldia_entry = LengthEntry()
grid1.addWidget(self.tooldia_entry, 0, 1)
choose_tools_label2 = QtWidgets.QLabel(
"Select from the tools section above\n"
"the tools you want to include.")
self.custom_box.addWidget(choose_tools_label2)
self.generate_milling_button = QtWidgets.QPushButton(
'Generate Geometry')
self.generate_milling_button.setToolTip("Create the Geometry Object\n"
"for milling toolpaths.")
self.custom_box.addWidget(self.generate_milling_button)
def __init__(self, parent=None):
super(GeometryObjectUI,
self).__init__(title='Geometry Object',
icon_file='share/geometry32.png',
parent=parent)
## Plot options
self.plot_options_label = QtWidgets.QLabel("<b>Plot Options:</b>")
self.custom_box.addWidget(self.plot_options_label)
# Plot CB
self.plot_cb = FCCheckBox(label='Plot')
self.plot_cb.setToolTip("Plot (show) this object.")
self.custom_box.addWidget(self.plot_cb)
#-----------------------------------
# Create CNC Job
#-----------------------------------
self.cncjob_label = QtWidgets.QLabel('<b>Create CNC Job:</b>')
self.cncjob_label.setToolTip("Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object.")
self.custom_box.addWidget(self.cncjob_label)
grid1 = QtWidgets.QGridLayout()
self.custom_box.addLayout(grid1)
cutzlabel = QtWidgets.QLabel('Cut Z:')
cutzlabel.setToolTip("Cutting depth (negative)\n"
"below the copper surface.")
grid1.addWidget(cutzlabel, 0, 0)
self.cutz_entry = LengthEntry()
grid1.addWidget(self.cutz_entry, 0, 1)
# Travel Z
travelzlabel = QtWidgets.QLabel('Travel Z:')
travelzlabel.setToolTip("Height of the tool when\n"
"moving without cutting.")
grid1.addWidget(travelzlabel, 1, 0)
self.travelz_entry = LengthEntry()
grid1.addWidget(self.travelz_entry, 1, 1)
# Feedrate
frlabel = QtWidgets.QLabel('Feed Rate:')
frlabel.setToolTip("Cutting speed in the XY\n"
"plane in units per minute")
grid1.addWidget(frlabel, 2, 0)
self.cncfeedrate_entry = LengthEntry()
grid1.addWidget(self.cncfeedrate_entry, 2, 1)
# Tooldia
tdlabel = QtWidgets.QLabel('Tool dia:')
tdlabel.setToolTip("The diameter of the cutting\n"
"tool (just for display).")
grid1.addWidget(tdlabel, 3, 0)
self.cnctooldia_entry = LengthEntry()
grid1.addWidget(self.cnctooldia_entry, 3, 1)
# Spindlespeed
spdlabel = QtWidgets.QLabel('Spindle speed:')
spdlabel.setToolTip("Speed of the spindle\n" "in RPM (optional)")
grid1.addWidget(spdlabel, 4, 0)
self.cncspindlespeed_entry = IntEntry(allow_empty=True)
grid1.addWidget(self.cncspindlespeed_entry, 4, 1)
# Multi-pass
mpasslabel = QtWidgets.QLabel('Multi-Depth:')
mpasslabel.setToolTip("Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached.")
grid1.addWidget(mpasslabel, 5, 0)
self.mpass_cb = FCCheckBox()
grid1.addWidget(self.mpass_cb, 5, 1)
maxdepthlabel = QtWidgets.QLabel('Depth/pass:'******'Generate')
self.generate_cnc_button.setToolTip("Generate the CNC Job object.")
self.custom_box.addWidget(self.generate_cnc_button)
#------------------------------
# Paint area
#------------------------------
self.paint_label = QtWidgets.QLabel('<b>Paint Area:</b>')
self.paint_label.setToolTip("Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon.")
self.custom_box.addWidget(self.paint_label)
grid2 = QtWidgets.QGridLayout()
self.custom_box.addLayout(grid2)
# Tool dia
ptdlabel = QtWidgets.QLabel('Tool dia:')
ptdlabel.setToolTip("Diameter of the tool to\n"
"be used in the operation.")
grid2.addWidget(ptdlabel, 0, 0)
self.painttooldia_entry = LengthEntry()
grid2.addWidget(self.painttooldia_entry, 0, 1)
# Overlap
ovlabel = QtWidgets.QLabel('Overlap:')
ovlabel.setToolTip("How much (fraction) of the tool\n"
"width to overlap each tool pass.")
grid2.addWidget(ovlabel, 1, 0)
self.paintoverlap_entry = LengthEntry()
grid2.addWidget(self.paintoverlap_entry, 1, 1)
# Margin
marginlabel = QtWidgets.QLabel('Margin:')
marginlabel.setToolTip("Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted.")
grid2.addWidget(marginlabel, 2, 0)
self.paintmargin_entry = LengthEntry()
grid2.addWidget(self.paintmargin_entry, 2, 1)
# Method
methodlabel = QtWidgets.QLabel('Method:')
methodlabel.setAlignment(QtCore.Qt.AlignLeft | QtCore.Qt.AlignTop)
methodlabel.setToolTip("Algorithm to paint the polygon:<BR>"
"<B>Standard</B>: Fixed step inwards.<BR>"
"<B>Seed-based</B>: Outwards from seed.")
grid2.addWidget(methodlabel, 3, 0)
self.paintmethod_combo = RadioSet([{
"label": "Standard",
"value": "standard"
}, {
"label": "Seed-based",
"value": "seed"
}, {
"label": "Straight lines",
"value": "lines"
}],
orientation='vertical')
grid2.addWidget(self.paintmethod_combo, 3, 1)
# Connect lines
pathconnectlabel = QtWidgets.QLabel("Connect:")
pathconnectlabel.setToolTip("Draw lines between resulting\n"
"segments to minimize tool lifts.")
grid2.addWidget(pathconnectlabel, 4, 0)
self.pathconnect_cb = FCCheckBox()
grid2.addWidget(self.pathconnect_cb, 4, 1)
contourlabel = QtWidgets.QLabel("Contour:")
contourlabel.setToolTip("Cut around the perimeter of the polygon\n"
"to trim rough edges.")
grid2.addWidget(contourlabel, 5, 0)
self.paintcontour_cb = FCCheckBox()
grid2.addWidget(self.paintcontour_cb, 5, 1)
# Polygon selection
selectlabel = QtWidgets.QLabel('Selection:')
selectlabel.setToolTip("How to select the polygons to paint.")
grid2.addWidget(selectlabel, 6, 0)
#grid3 = QtWidgets.QGridLayout()
self.selectmethod_combo = RadioSet([
{
"label": "Single",
"value": "single"
},
{
"label": "All",
"value": "all"
},
#{"label": "Rectangle", "value": "rectangle"}
])
grid2.addWidget(self.selectmethod_combo, 6, 1)
# GO Button
self.generate_paint_button = QtWidgets.QPushButton('Generate')
self.generate_paint_button.setToolTip(
"After clicking here, click inside\n"
"the polygon you wish to be painted.\n"
"A new Geometry object with the tool\n"
"paths will be created.")
self.custom_box.addWidget(self.generate_paint_button)