def addJetFinderTool(self,
toolname,
alg,
radius,
ivtx=None,
ghostArea=0.0,
ptmin=0.0,
rndseed=1,
variableRMinRadius=-1.0,
variableRMassScale=-1.0,
constmods=[]):
myname = "JetToolManager:addJetFinderTool: "
if toolname in self.tools:
m = "Tool " + myname + " is already registered"
self.msg(0, m)
raise LookupError(m)
self.msg(2, "Adding finder tool")
if ghostArea == 0.0:
self.m_jetBuilder = self.jetBuilderWithoutArea
else:
self.m_jetBuilder = self.jetBuilderWithArea
if self.m_jetBuilder == None:
self.msg(0, "Jet builder must be specified")
raise Error
from JetRec.JetRecConf import JetFinder
areaSuffix = "Area" if ghostArea > 0.0 else ""
finder = JetFinder(toolname)
finder.JetAlgorithm = alg
finder.JetRadius = radius
finder.VariableRMinRadius = variableRMinRadius
finder.VariableRMassScale = variableRMassScale
finder.RandomOption = rndseed
finder.GhostArea = ghostArea
if ptmin > 0.0:
finder.PtMin = ptmin
else:
finder.PtMin = self.ptminFinder
finder.JetBuilder = self.m_jetBuilder
self += finder
self.finders += [finder]
hifinder = finder
if type(ivtx) is int:
from JetRec.JetRecConf import JetByVertexFinder
vfinder = JetByVertexFinder(toolname + "ByVertex",
JetFinder=finder,
Vertex=ivtx)
self += vfinder
self.finders += [vfinder]
hifinder = vfinder
return (finder, hifinder)
def addJetFinderTool(self, toolname, alg, radius, ivtx =None,
ghostArea =0.0, ptmin =0.0, rndseed =1,
variableRMinRadius =-1.0, variableRMassScale =-1.0):
myname = "JetToolManager:addJetFinderTool: "
if toolname in self.tools:
self.msg(0, "Tool " + myname + " is already registered")
raise LookupError
self.msg(2, "Adding finder tool")
if ghostArea == 0.0:
self.m_jetBuilder = self.jetBuilderWithoutArea
else:
self.m_jetBuilder = self.jetBuilderWithArea
if self.m_jetBuilder == None:
self.msg(0, "Jet builder must be specified")
raise Error
from JetRec.JetRecConf import JetFinder
areaSuffix= "Area" if ghostArea>0.0 else ""
finder = JetFinder(toolname);
finder.JetAlgorithm = alg
finder.JetRadius = radius
finder.VariableRMinRadius = variableRMinRadius
finder.VariableRMassScale = variableRMassScale
finder.RandomOption = rndseed
finder.GhostArea = ghostArea
if ptmin > 0.0:
finder.PtMin = ptmin
else:
finder.PtMin = self.ptminFinder
finder.JetBuilder = self.m_jetBuilder
self += finder
self.finders += [finder]
hifinder = finder;
if type(ivtx) is int:
from JetRec.JetRecConf import JetByVertexFinder
vfinder = JetByVertexFinder(
toolname + "ByVertex",
JetFinder = finder,
Vertex = ivtx
)
self += vfinder
self.finders += [vfinder]
hifinder = vfinder;
return (finder, hifinder)
# Find jet inputs.
from JetRecTools.JetRecToolsConf import TCCPseudoJetGetter
psjget = TCCPseudoJetGetter("TCCPseudoJetGetter_" + name)
psjget.InputContainer = name
psjget.Label = "TrackCaloCluster"
psjget.OutputContainer = "PseudoJetClusters" + name
# psjget.OutputLevel = INFO
psjget.SkipNegativeEnergy = True
ToolSvc += psjget
# Find jets.
from JetRec.JetRecConf import JetFinder
jfind = JetFinder("JetFinder_" + name)
jfind.JetAlgorithm = "AntiKt"
jfind.JetRadius = 1.0
jfind.GhostArea = 0.01
jfind.PtMin = 200000.0
# jfind.OutputLevel = VERBOSE
ToolSvc += jfind
# JetRec tool for finding.
jetrec = JetRecTool("JetRecTool_" + name)
jetrec.OutputContainer = "AntiKt10" + name + "Jets"
# jetrec.OutputLevel = INFO
jetrec.PseudoJetGetters += [psjget]
jetrec.JetFinder = jfind
#jetrec.JetModifiers += [nsubjettiness]
#jetrec.JetModifiers += [nsubjettinessratios]
# jetrec.JetModifiers += [ktsplittingscale]
# jetrec.JetModifiers += [dipolarity]
# jetrec.JetModifiers += [angularity]
def addTriggerJetBuildTool(
self,
name, # passed to modifiers- might be used for SG??
alg, # jetFinderTool
radius, # jetFinderTool
# getter_label is passed to modifiers,
# and also labels ParticleExtractors
getter_label,
concrete_type,
iParticleRejectionTool,
modifiersin=None,
ivtxin=None, # jetFinderTool
ghostArea=0.0, # jetFinderTool
ptmin=0.0, # jetFinderTool
ptminFilter=0.0, # ?
rndseed=1, # jetFinderTool
variableRMinRadius=-1.0, # jetFinderTool
variableRMassScale=-1.0, # jetFinderTool
calibOpt="",
noNegE=False,
OutputLevel=0):
self.msg(2, "Adding TriggerJetBuildTool")
#### TO BE REMOVED start
# lofinder,hifinder = self.addJetFinderTool(name+"Finder",
# alg,
# radius,
# ivtxin,
# ghostArea,
# ptmin,
# rndseed,
# variableRMinRadius,
# variableRMassScale)
# print 'called addJetFinderTool with arguments ' + ' ,'.join(
# (
# str(name+"Finder"),
# str(alg),
# str(radius),
# str(ivtxin),
# str(ghostArea),
# str(ptmin),
# str(rndseed),
# str(variableRMinRadius),
# str(variableRMassScale),
# )) + ' class ' + hifinder.__class__.__name__
#### TO BE REMOVED end
from JetRec.JetRecConf import JetFromPseudojet
jetFromPseudoJet = JetFromPseudojet(name + 'jFp')
if ghostArea == 0.0:
jetFromPseudoJet.Attributes = []
else:
jetFromPseudoJet.Attributes = ["ActiveArea", "ActiveArea4vec"]
jetFromPseudoJet.OutputLevel = OutputLevel
self += jetFromPseudoJet
from JetRec.JetRecConf import JetFinder
finder = JetFinder(name + 'Finder')
finder.JetBuilder = jetFromPseudoJet
finder.OutputLevel = OutputLevel
finder.JetAlgorithm = alg
finder.VariableRMinRadius = variableRMinRadius
finder.VariableRMassScale = variableRMassScale
finder.GhostArea = ghostArea
finder.JetRadius = radius
finder.PtMin = ptmin
finder.RandomOption = 1 # 1: used run/evt number to make seed
# !!! note RandomOption not set FIXME
self += finder
# self.ptminFilter used in self.buildModifiers
ptminSave = self.ptminFilter
if ptminFilter > 0.0: self.ptminFilter = ptminFilter
# getters supply a label to the modifiers.
class Dummy(object):
def __init__(self):
pass
dummyGetter = Dummy()
dummyGetter.Label = getter_label
getters = [dummyGetter]
#class DummyGetter(object):
# def __init__(self, label):
# self.Label = label
# getters = [DummyGetter(getter_label)]
gettersin = 'mymods' # from Run2 code
dummyFinder = Dummy()
dummyFinder.JetAlgorithm = alg
dummyFinder.JetRadius = radius
modifiers = self.buildModifiers(
modifiersin=modifiersin,
# finder=lofinder,
finder=dummyFinder,
getters=getters,
altname=gettersin,
calibOpt=calibOpt,
output='',
)
for m in modifiers:
self.setOutputLevel(m, OutputLevel)
# Temporary hard-coded solution until this config is deprecated.
triggerPrefix = "HLT_xAOD__JetContainer_"
self.autoconfigureModifiers(modifiers,
triggerPrefix + name.split('_')[1])
self.ptminFilter = ptminSave
# Retrieve/build the jet finder.
from TrigHLTJetRec.TrigHLTJetRecConf import TriggerJetBuildTool
builder = TriggerJetBuildTool(name)
# print ('setting builder name to ', name)
print('adding new trigger jet finder ', name)
# self.setOutputLevel(hifinder, OutputLevel)
# builder.JetFinder = hifinder
builder.JetFinder = finder
builder.JetModifiers = modifiers
# builder.NoNegE = noNegE
# builder.label = getter_label
builder.OutputLevel = OutputLevel
builder.concrete_type = concrete_type
builder.iParticleRejecter = iParticleRejectionTool
self += builder
return builder
# the weirdo "ParticleJetMap thingy should then be existing for all. Still a race condition problem, but much less I hope...
# Note: add dependencies in the CaloHiveDeps.py
# anti-kt 4 standardjets
jalg4 = JetAlgorithm("jetalg4")
j4 = JetRecTool("jetrectool4", OutputContainer="AntiKt4EMTopoJets")
g4 = PseudoJetGetter("emget4",
InputContainer="CaloTopoCluster",
Label="EMTopo",
OutputContainer="PseudoJetEMTopo4",
SkipNegativeEnergy=True,
GhostScale=0.0)
f4 = JetFinder("fastjet-4")
f4.JetAlgorithm = "AntiKt"
f4.JetRadius = 0.4
f4.GhostArea = 0.0
f4.PtMin = 10.0
o4 = JetFromPseudojet("out4")
ToolSvc += JetRecTool("jetrectool4")
ToolSvc += PseudoJetGetter("emget4")
ToolSvc += JetFinder("fastjet-4")
ToolSvc += JetFromPseudojet("out4")
j4.PseudoJetGetters += [g4]
j4.JetFinder = f4
f4.JetBuilder = o4
jalg4.Tools += [j4]
topSequence += jalg4
jetFlags.jetAODList += ["xAOD::JetContainer#AntiKt4EMTopoJets"]
jetFlags.jetAODList += ["xAOD::JetAuxContainer#AntiKt4EMTopoJetsAux."]
def addJetFinder(self, output, alg, radius, gettersin, modifiersin =None, ivtxin =None,
ghostArea =0.0, ptmin =0.0, ptminFilter =0.0, rndseed =1,
isTrigger =False, useTriggerStore =False,
variableRMinRadius =-1.0, variableRMassScale =-1.0,
calibOpt =""):
from JetRec.JetRecConf import JetByVertexFinder
self.msg(2, "Adding finder")
if ghostArea == 0.0:
self.m_jetBuilder = self.jetBuilderWithoutArea
else:
self.m_jetBuilder = self.jetBuilderWithArea
if self.m_jetBuilder == None:
self.msg(0, "Jet builder must be specified")
raise Error
from JetRec.JetRecConf import JetFinder
from JetRec.JetRecConf import JetSplitter
from JetRec.JetRecConf import JetRecTool
if type(gettersin) == str:
getters = self.gettersMap[gettersin]
else:
getters = gettersin
areaSuffix= "Area" if ghostArea>0.0 else ""
finder = JetFinder(output + areaSuffix+ "Finder")
finder.JetAlgorithm = alg
finder.JetRadius = radius
finder.VariableRMinRadius = variableRMinRadius
finder.VariableRMassScale = variableRMassScale
finder.RandomOption = rndseed
finder.GhostArea = ghostArea
if ptmin > 0.0:
finder.PtMin = ptmin
else:
finder.PtMin = self.ptminFinder
finder.JetBuilder = self.m_jetBuilder
self += finder
jrfinder = finder;
# If jet finding by vertex is not specified, check for special input type names
ivtx = ivtxin
if ivtx == None:
if gettersin == "ztrack": ivtx = -1 # Find tracs separatesly for each vertex
elif gettersin == "pv0track": ivtx = 0 # Find tracks only for 1st vertex
# If jet finding by vertex is requested, change the finder
if type(ivtx) is int:
vfinder = JetByVertexFinder(
output + "VertexFinder",
JetFinder = finder,
Vertex = ivtx
)
self += vfinder
jrfinder = vfinder;
jetrec = JetRecTool(output)
jetrec.PseudoJetGetters = getters
jetrec.JetFinder = jrfinder
jetrec.OutputContainer = output
ptminSave = self.ptminFilter
if ptminFilter > 0.0: self.ptminFilter = ptminFilter
jetrec.JetModifiers = self.buildModifiers(modifiersin, finder, getters, gettersin, output, calibOpt)
self.ptminFilter = ptminSave
jetrec.Trigger = isTrigger or useTriggerStore
jetrec.Timer = self.timer
self += jetrec
self.finders += [finder]
if isTrigger:
self.trigjetrecs += [jetrec]
else:
self.jetrecs += [jetrec]
self.jetcons += [output]
return jetrec