def createGuide(self, *args):
Base.StartClass.createGuide(self)
# Custom GUIDE:
cmds.addAttr(self.moduleGrp, longName="flip", attributeType='bool')
cmds.setAttr(self.moduleGrp+".flip", 0)
cmds.addAttr(self.moduleGrp, longName="indirectSkin", attributeType='bool')
cmds.setAttr(self.moduleGrp+".indirectSkin", 0)
cmds.setAttr(self.moduleGrp+".moduleNamespace", self.moduleGrp[:self.moduleGrp.rfind(":")], type='string')
self.cvJointLoc, shapeSizeCH = ctrls.cvJointLoc(ctrlName=self.guideName+"_JointLoc1", r=0.3)
self.connectShapeSize(shapeSizeCH)
self.jGuide1 = cmds.joint(name=self.guideName+"_JGuide1", radius=0.001)
cmds.setAttr(self.jGuide1+".template", 1)
cmds.parent(self.jGuide1, self.moduleGrp, relative=True)
self.cvEndJoint, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName+"_JointEnd", r=0.1)
self.connectShapeSize(shapeSizeCH)
cmds.parent(self.cvEndJoint, self.cvJointLoc)
cmds.setAttr(self.cvEndJoint+".tz", 1.3)
self.jGuideEnd = cmds.joint(name=self.guideName+"_JGuideEnd", radius=0.001)
cmds.setAttr(self.jGuideEnd+".template", 1)
cmds.transformLimits(self.cvEndJoint, tz=(0.01, 1), etz=(True, False))
ctrls.setLockHide([self.cvEndJoint], ['tx', 'ty', 'rx', 'ry', 'rz', 'sx', 'sy', 'sz'])
cmds.parent(self.cvJointLoc, self.moduleGrp)
cmds.parent(self.jGuideEnd, self.jGuide1)
cmds.parentConstraint(self.cvJointLoc, self.jGuide1, maintainOffset=False, name=self.jGuide1+"_ParentConstraint")
cmds.parentConstraint(self.cvEndJoint, self.jGuideEnd, maintainOffset=False, name=self.jGuideEnd+"_ParentConstraint")
cmds.scaleConstraint(self.cvJointLoc, self.jGuide1, maintainOffset=False, name=self.jGuide1+"_ScaleConstraint")
cmds.scaleConstraint(self.cvEndJoint, self.jGuideEnd, maintainOffset=False, name=self.jGuideEnd+"_ScaleConstraint")
def createGuide(self, *args):
Base.StartClass.createGuide(self)
# Custom GUIDE:
cmds.addAttr(self.moduleGrp, longName="nJoints", attributeType='long')
cmds.setAttr(self.moduleGrp+".nJoints", 1)
cmds.addAttr(self.moduleGrp, longName="flip", attributeType='bool')
cmds.setAttr(self.moduleGrp+".flip", 0)
cmds.setAttr(self.moduleGrp+".moduleNamespace", self.moduleGrp[:self.moduleGrp.rfind(":")], type='string')
self.cvJointLoc, shapeSizeCH = ctrls.cvJointLoc(ctrlName=self.guideName+"_JointLoc1", r=0.3)
self.connectShapeSize(shapeSizeCH)
self.jGuide1 = cmds.joint(name=self.guideName+"_JGuide1", radius=0.001)
cmds.setAttr(self.jGuide1+".template", 1)
cmds.parent(self.jGuide1, self.moduleGrp, relative=True)
self.cvEndJoint, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName+"_JointEnd", r=0.1)
self.connectShapeSize(shapeSizeCH)
cmds.parent(self.cvEndJoint, self.cvJointLoc)
cmds.setAttr(self.cvEndJoint+".tz", 1.3)
self.jGuideEnd = cmds.joint(name=self.guideName+"_JGuideEnd", radius=0.001)
cmds.setAttr(self.jGuideEnd+".template", 1)
cmds.transformLimits(self.cvEndJoint, tz=(0.01, 1), etz=(True, False))
ctrls.setLockHide([self.cvEndJoint], ['tx', 'ty', 'rx', 'ry', 'rz', 'sx', 'sy', 'sz'])
cmds.parent(self.cvJointLoc, self.moduleGrp)
cmds.parent(self.jGuideEnd, self.jGuide1)
cmds.parentConstraint(self.cvJointLoc, self.jGuide1, maintainOffset=False, name=self.jGuide1+"_ParentConstraint")
cmds.parentConstraint(self.cvEndJoint, self.jGuideEnd, maintainOffset=False, name=self.jGuideEnd+"_ParentConstraint")
cmds.scaleConstraint(self.cvJointLoc, self.jGuide1, maintainOffset=False, name=self.jGuide1+"_ScaleConstraint")
cmds.scaleConstraint(self.cvEndJoint, self.jGuideEnd, maintainOffset=False, name=self.jGuideEnd+"_ScaleConstraint")
def createGuide(self, *args):
Base.StartClass.createGuide(self)
# Custom GUIDE:
cmds.setAttr(self.moduleGrp + ".moduleNamespace",
self.moduleGrp[:self.moduleGrp.rfind(":")],
type='string')
cmds.addAttr(self.moduleGrp, longName="nJoints", attributeType='long')
cmds.addAttr(self.moduleGrp,
longName="style",
attributeType='enum',
enumName=self.langDic[self.langName]['m042_default'] +
':' + self.langDic[self.langName]['m026_biped'])
cmds.setAttr(self.moduleGrp + ".nJoints", 1)
self.cvJointLoc, shapeSizeCH = ctrls.cvJointLoc(
ctrlName=self.guideName + "_JointLoc1", r=0.5)
self.connectShapeSize(shapeSizeCH)
self.cvEndJoint, shapeSizeCH = ctrls.cvLocator(
ctrlName=self.guideName + "_JointEnd", r=0.1)
self.connectShapeSize(shapeSizeCH)
cmds.parent(self.cvEndJoint, self.cvJointLoc)
cmds.setAttr(self.cvEndJoint + ".tz", 1.3)
cmds.transformLimits(self.cvEndJoint, tz=(0.01, 1), etz=(True, False))
ctrls.setLockHide([self.cvEndJoint],
['tx', 'ty', 'rx', 'ry', 'rz', 'sx', 'sy', 'sz'])
cmds.parent(self.cvJointLoc, self.moduleGrp)
# Edit GUIDE:
cmds.setAttr(self.moduleGrp + ".rx", -90)
cmds.setAttr(self.moduleGrp + ".ry", -90)
cmds.setAttr(self.moduleGrp + "_RadiusCtrl.tx", 4)
def createGuide(self, *args):
Base.StartClass.createGuide(self)
# Custom GUIDE:
cmds.addAttr(self.moduleGrp, longName="nJoints", attributeType='long')
cmds.setAttr(self.moduleGrp + ".nJoints", 1)
cmds.setAttr(self.moduleGrp + ".moduleNamespace",
self.moduleGrp[:self.moduleGrp.rfind(":")],
type='string')
self.cvJointLoc, shapeSizeCH = ctrls.cvJointLoc(
ctrlName=self.guideName + "_JointLoc1", r=0.3)
self.connectShapeSize(shapeSizeCH)
self.jGuide1 = cmds.joint(name=self.guideName + "_JGuide1",
radius=0.001)
cmds.setAttr(self.jGuide1 + ".template", 1)
cmds.parent(self.jGuide1, self.moduleGrp, relative=True)
self.cvEndJoint, shapeSizeCH = ctrls.cvLocator(
ctrlName=self.guideName + "_JointEnd", r=0.2)
self.connectShapeSize(shapeSizeCH)
cmds.parent(self.cvEndJoint, self.cvJointLoc)
cmds.setAttr(self.cvEndJoint + ".tz", 1.3)
self.jGuideEnd = cmds.joint(name=self.guideName + "_JGuideEnd",
radius=0.001)
cmds.setAttr(self.jGuideEnd + ".template", 1)
cmds.transformLimits(self.cvEndJoint, tz=(0.01, 1), etz=(True, False))
ctrls.setLockHide([self.cvEndJoint],
['rx', 'ry', 'rz', 'sx', 'sy', 'sz'])
cmds.parent(self.cvJointLoc, self.moduleGrp)
cmds.parent(self.jGuideEnd, self.jGuide1)
ctrls.directConnect(self.cvJointLoc, self.jGuide1,
['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
ctrls.directConnect(self.cvEndJoint, self.jGuideEnd,
['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
# change the number of falanges to 3:
self.changeJointNumber(3)
# create a base cvLoc to start the finger joints:
self.cvBaseJoint, shapeSizeCH = ctrls.cvLocator(
ctrlName=self.guideName + "_JointLoc0", r=0.2)
self.connectShapeSize(shapeSizeCH)
cmds.setAttr(self.cvBaseJoint + ".translateZ", -1)
cmds.parent(self.cvBaseJoint, self.moduleGrp)
# transform cvLocs in order to put as a good finger guide:
cmds.setAttr(self.moduleGrp + ".rotateX", 90)
cmds.setAttr(self.moduleGrp + ".rotateZ", 90)
def createGuide(self, *args):
Base.StartClass.createGuide(self)
# Custom GUIDE:
cmds.setAttr(self.moduleGrp + ".moduleNamespace", self.moduleGrp[:self.moduleGrp.rfind(":")], type='string')
cmds.addAttr(self.moduleGrp, longName="nJoints", attributeType='long')
cmds.setAttr(self.moduleGrp + ".nJoints", 1)
self.cvJointLoc, shapeSizeCH = ctrls.cvJointLoc(ctrlName=self.guideName + "_JointLoc1", r=0.5)
self.connectShapeSize(shapeSizeCH)
self.cvEndJoint, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName + "_JointEnd", r=0.1)
self.connectShapeSize(shapeSizeCH)
cmds.parent(self.cvEndJoint, self.cvJointLoc)
cmds.setAttr(self.cvEndJoint + ".tz", 1.3)
cmds.transformLimits(self.cvEndJoint, tz=(0.01, 1), etz=(True, False))
ctrls.setLockHide([self.cvEndJoint], ['tx', 'ty', 'rx', 'ry', 'rz', 'sx', 'sy', 'sz'])
cmds.parent(self.cvJointLoc, self.moduleGrp)
# Edit GUIDE:
cmds.setAttr(self.moduleGrp + ".rx", -90)
cmds.setAttr(self.moduleGrp + ".ry", -90)
cmds.setAttr(self.moduleGrp + "_RadiusCtrl.tx", 4)
def createGuide(self, *args):
Base.StartClass.createGuide(self)
# Custom GUIDE:
cmds.addAttr(self.moduleGrp, longName="nJoints", attributeType='long')
cmds.setAttr(self.moduleGrp+".nJoints", 1)
cmds.setAttr(self.moduleGrp+".moduleNamespace", self.moduleGrp[:self.moduleGrp.rfind(":")], type='string')
self.cvJointLoc, shapeSizeCH = ctrls.cvJointLoc(ctrlName=self.guideName+"_JointLoc1", r=0.3)
self.connectShapeSize(shapeSizeCH)
self.jGuide1 = cmds.joint(name=self.guideName+"_JGuide1", radius=0.001)
cmds.setAttr(self.jGuide1+".template", 1)
cmds.parent(self.jGuide1, self.moduleGrp, relative=True)
self.cvEndJoint, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName+"_JointEnd", r=0.2)
self.connectShapeSize(shapeSizeCH)
cmds.parent(self.cvEndJoint, self.cvJointLoc)
cmds.setAttr(self.cvEndJoint+".tz", 1.3)
self.jGuideEnd = cmds.joint(name=self.guideName+"_JGuideEnd", radius=0.001)
cmds.setAttr(self.jGuideEnd+".template", 1)
cmds.transformLimits(self.cvEndJoint, tz=(0.01, 1), etz=(True, False))
ctrls.setLockHide([self.cvEndJoint], ['rx', 'ry', 'rz', 'sx', 'sy', 'sz'])
cmds.parent(self.cvJointLoc, self.moduleGrp)
cmds.parent(self.jGuideEnd, self.jGuide1)
ctrls.directConnect(self.cvJointLoc, self.jGuide1, ['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
ctrls.directConnect(self.cvEndJoint, self.jGuideEnd, ['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
# change the number of falanges to 3:
self.changeJointNumber(3)
# create a base cvLoc to start the finger joints:
self.cvBaseJoint, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName+"_JointLoc0", r=0.2)
self.connectShapeSize(shapeSizeCH)
cmds.setAttr(self.cvBaseJoint+".translateZ", -1)
cmds.parent(self.cvBaseJoint, self.moduleGrp)
# transform cvLocs in order to put as a good finger guide:
cmds.setAttr(self.moduleGrp+".rotateX", 90)
cmds.setAttr(self.moduleGrp+".rotateZ", 90)
def createGuide(self, *args):
Base.StartClass.createGuide(self)
# Custom GUIDE:
cmds.setAttr(self.moduleGrp + ".moduleNamespace", self.moduleGrp[:self.moduleGrp.rfind(":")], type='string')
# create cvJointLoc and cvLocators:
self.cvFootLoc, shapeSizeCH = ctrls.cvJointLoc(ctrlName=self.guideName + "_foot", r=0.3)
self.connectShapeSize(shapeSizeCH)
self.cvRFALoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName + "_RfA", r=0.3)
self.connectShapeSize(shapeSizeCH)
self.cvRFBLoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName + "_RfB", r=0.3)
self.connectShapeSize(shapeSizeCH)
self.cvRFCLoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName + "_RfC", r=0.3)
self.connectShapeSize(shapeSizeCH)
self.cvRFDLoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName + "_RfD", r=0.3)
self.connectShapeSize(shapeSizeCH)
self.cvRFELoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName + "_RfE", r=0.3)
self.connectShapeSize(shapeSizeCH)
# create jointGuides:
self.jGuideFoot = cmds.joint(name=self.guideName + "_JGuideFoot", radius=0.001)
self.jGuideRFE = cmds.joint(name=self.guideName + "_JGuideRfE", radius=0.001)
cmds.select(clear=True)
self.jGuideRFA = cmds.joint(name=self.guideName + "_JGuideRfA", radius=0.001)
self.jGuideRFD = cmds.joint(name=self.guideName + "_JGuideRfD", radius=0.001)
self.jGuideRFB = cmds.joint(name=self.guideName + "_JGuideRfB", radius=0.001)
self.jGuideRFC = cmds.joint(name=self.guideName + "_JGuideRfC", radius=0.001)
self.jGuideRFAC = cmds.joint(name=self.guideName + "_JGuideRfAC", radius=0.001)
# set jointGuides as templates:
cmds.setAttr(self.jGuideFoot + ".template", 1)
cmds.setAttr(self.jGuideRFA + ".template", 1)
cmds.setAttr(self.jGuideRFB + ".template", 1)
cmds.setAttr(self.jGuideRFC + ".template", 1)
cmds.setAttr(self.jGuideRFD + ".template", 1)
cmds.setAttr(self.jGuideRFE + ".template", 1)
cmds.parent(self.jGuideFoot, self.jGuideRFA, self.moduleGrp, relative=True)
# create cvEnd:
self.cvEndJoint, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName + "_JointEnd", r=0.1)
self.connectShapeSize(shapeSizeCH)
cmds.parent(self.cvEndJoint, self.cvRFELoc)
cmds.setAttr(self.cvEndJoint + ".tz", 1.3)
self.jGuideEnd = cmds.joint(name=self.guideName + "_JGuideEnd", radius=0.001)
cmds.setAttr(self.jGuideEnd + ".template", 1)
cmds.parent(self.jGuideEnd, self.jGuideRFE)
# make parents between cvLocs:
cmds.parent(self.cvFootLoc, self.cvRFALoc, self.cvRFBLoc, self.cvRFCLoc, self.cvRFDLoc, self.moduleGrp)
cmds.parent(self.cvRFELoc, self.cvFootLoc)
# connect cvLocs in jointGuides:
ctrls.directConnect(self.cvFootLoc, self.jGuideFoot, ['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
cmds.parentConstraint(self.cvRFALoc, self.jGuideRFA, maintainOffset=False,
name=self.jGuideRFA + "_ParentConstraint")
cmds.parentConstraint(self.cvRFBLoc, self.jGuideRFB, maintainOffset=False,
name=self.jGuideRFB + "_ParentConstraint")
cmds.parentConstraint(self.cvRFCLoc, self.jGuideRFC, maintainOffset=False,
name=self.jGuideRFC + "_ParentConstraint")
cmds.parentConstraint(self.cvRFDLoc, self.jGuideRFD, maintainOffset=False,
name=self.jGuideRFD + "_ParentConstraint")
cmds.parentConstraint(self.cvRFELoc, self.jGuideRFE, maintainOffset=False,
name=self.jGuideRFE + "_ParentConstraint")
cmds.parentConstraint(self.cvRFALoc, self.jGuideRFAC, maintainOffset=False,
name=self.jGuideRFAC + "_ParentConstraint")
ctrls.directConnect(self.cvEndJoint, self.jGuideEnd, ['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
# limit, lock and hide cvEnd:
cmds.transformLimits(self.cvEndJoint, tz=(0.01, 1), etz=(True, False))
ctrls.setLockHide([self.cvEndJoint], ['tx', 'ty', 'rx', 'ry', 'rz', 'sx', 'sy', 'sz'])
# transform cvLocs in order to put as a good foot guide:
cmds.setAttr(self.cvFootLoc + ".translateZ", 2)
cmds.setAttr(self.cvFootLoc + ".rotateY", -90)
cmds.setAttr(self.cvRFELoc + ".translateX", -1)
cmds.setAttr(self.cvRFELoc + ".translateZ", 2.5)
cmds.setAttr(self.cvRFCLoc + ".translateX", 1)
cmds.setAttr(self.cvRFALoc + ".translateX", -0.6)
cmds.setAttr(self.cvRFALoc + ".translateY", -1)
cmds.setAttr(self.cvRFBLoc + ".translateX", -0.6)
cmds.setAttr(self.cvRFBLoc + ".translateY", 1)
cmds.setAttr(self.cvRFDLoc + ".translateX", -3.5)
cmds.setAttr(self.moduleGrp + ".rotateX", -90)
cmds.setAttr(self.moduleGrp + ".rotateY", 90)
def createGuide(self, *args):
Base.StartClass.createGuide(self)
# Custom GUIDE:
cmds.setAttr(self.moduleGrp + ".moduleNamespace",
self.moduleGrp[:self.moduleGrp.rfind(":")],
type='string')
# create cvJointLoc and cvLocators:
self.cvFootLoc, shapeSizeCH = ctrls.cvJointLoc(
ctrlName=self.guideName + "_foot", r=0.3)
self.connectShapeSize(shapeSizeCH)
self.cvRFALoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName +
"_RfA",
r=0.3)
self.connectShapeSize(shapeSizeCH)
self.cvRFBLoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName +
"_RfB",
r=0.3)
self.connectShapeSize(shapeSizeCH)
self.cvRFCLoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName +
"_RfC",
r=0.3)
self.connectShapeSize(shapeSizeCH)
self.cvRFDLoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName +
"_RfD",
r=0.3)
self.connectShapeSize(shapeSizeCH)
self.cvRFELoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName +
"_RfE",
r=0.3)
self.connectShapeSize(shapeSizeCH)
# create jointGuides:
self.jGuideFoot = cmds.joint(name=self.guideName + "_JGuideFoot",
radius=0.001)
self.jGuideRFE = cmds.joint(name=self.guideName + "_JGuideRfE",
radius=0.001)
cmds.select(clear=True)
self.jGuideRFA = cmds.joint(name=self.guideName + "_JGuideRfA",
radius=0.001)
self.jGuideRFD = cmds.joint(name=self.guideName + "_JGuideRfD",
radius=0.001)
self.jGuideRFB = cmds.joint(name=self.guideName + "_JGuideRfB",
radius=0.001)
self.jGuideRFC = cmds.joint(name=self.guideName + "_JGuideRfC",
radius=0.001)
self.jGuideRFAC = cmds.joint(name=self.guideName + "_JGuideRfAC",
radius=0.001)
# set jointGuides as templates:
cmds.setAttr(self.jGuideFoot + ".template", 1)
cmds.setAttr(self.jGuideRFA + ".template", 1)
cmds.setAttr(self.jGuideRFB + ".template", 1)
cmds.setAttr(self.jGuideRFC + ".template", 1)
cmds.setAttr(self.jGuideRFD + ".template", 1)
cmds.setAttr(self.jGuideRFE + ".template", 1)
cmds.parent(self.jGuideFoot,
self.jGuideRFA,
self.moduleGrp,
relative=True)
# create cvEnd:
self.cvEndJoint, shapeSizeCH = ctrls.cvLocator(
ctrlName=self.guideName + "_JointEnd", r=0.1)
self.connectShapeSize(shapeSizeCH)
cmds.parent(self.cvEndJoint, self.cvRFELoc)
cmds.setAttr(self.cvEndJoint + ".tz", 1.3)
self.jGuideEnd = cmds.joint(name=self.guideName + "_JGuideEnd",
radius=0.001)
cmds.setAttr(self.jGuideEnd + ".template", 1)
cmds.parent(self.jGuideEnd, self.jGuideRFE)
# make parents between cvLocs:
cmds.parent(self.cvFootLoc, self.cvRFALoc, self.cvRFBLoc,
self.cvRFCLoc, self.cvRFDLoc, self.moduleGrp)
cmds.parent(self.cvRFELoc, self.cvFootLoc)
# connect cvLocs in jointGuides:
ctrls.directConnect(self.cvFootLoc, self.jGuideFoot,
['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
cmds.parentConstraint(self.cvRFALoc,
self.jGuideRFA,
maintainOffset=False,
name=self.jGuideRFA + "_ParentConstraint")
cmds.parentConstraint(self.cvRFBLoc,
self.jGuideRFB,
maintainOffset=False,
name=self.jGuideRFB + "_ParentConstraint")
cmds.parentConstraint(self.cvRFCLoc,
self.jGuideRFC,
maintainOffset=False,
name=self.jGuideRFC + "_ParentConstraint")
cmds.parentConstraint(self.cvRFDLoc,
self.jGuideRFD,
maintainOffset=False,
name=self.jGuideRFD + "_ParentConstraint")
cmds.parentConstraint(self.cvRFELoc,
self.jGuideRFE,
maintainOffset=False,
name=self.jGuideRFE + "_ParentConstraint")
cmds.parentConstraint(self.cvRFALoc,
self.jGuideRFAC,
maintainOffset=False,
name=self.jGuideRFAC + "_ParentConstraint")
ctrls.directConnect(self.cvEndJoint, self.jGuideEnd,
['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
# limit, lock and hide cvEnd:
cmds.transformLimits(self.cvEndJoint, tz=(0.01, 1), etz=(True, False))
ctrls.setLockHide([self.cvEndJoint],
['tx', 'ty', 'rx', 'ry', 'rz', 'sx', 'sy', 'sz'])
# transform cvLocs in order to put as a good foot guide:
cmds.setAttr(self.cvFootLoc + ".translateZ", 2)
cmds.setAttr(self.cvFootLoc + ".rotateY", -90)
cmds.setAttr(self.cvRFELoc + ".translateX", -1)
cmds.setAttr(self.cvRFELoc + ".translateZ", 2.5)
cmds.setAttr(self.cvRFCLoc + ".translateX", 1)
cmds.setAttr(self.cvRFALoc + ".translateX", -0.6)
cmds.setAttr(self.cvRFALoc + ".translateY", -1)
cmds.setAttr(self.cvRFBLoc + ".translateX", -0.6)
cmds.setAttr(self.cvRFBLoc + ".translateY", 1)
cmds.setAttr(self.cvRFDLoc + ".translateX", -3.5)
cmds.setAttr(self.moduleGrp + ".rotateX", -90)
cmds.setAttr(self.moduleGrp + ".rotateY", 90)
def changeJointNumber(self, enteredNJoints, *args):
""" Edit the number of joints in the guide.
"""
utils.useDefaultRenderLayer()
# get the number of joints entered by user:
if enteredNJoints == 0:
try:
self.enteredNJoints = cmds.intField(self.nJointsIF, query=True, value=True)
except:
return
else:
self.enteredNJoints = enteredNJoints
# get the number of joints existing:
self.currentNJoints = cmds.getAttr(self.moduleGrp+".nJoints")
# start analisys the difference between values:
if self.enteredNJoints != self.currentNJoints:
# unparent temporarely the Ends:
self.cvEndJoint = self.guideName+"_JointEnd"
cmds.parent(self.cvEndJoint, world=True)
self.jGuideEnd = (self.guideName+"_JGuideEnd")
cmds.parent(self.jGuideEnd, world=True)
# verify if the nJoints is greather or less than the current
if self.enteredNJoints > self.currentNJoints:
for n in range(self.currentNJoints+1, self.enteredNJoints+1):
# create another N cvJointLoc:
self.cvJointLoc, shapeSizeCH = ctrls.cvJointLoc( ctrlName=self.guideName+"_JointLoc"+str(n), r=0.3 )
self.connectShapeSize(shapeSizeCH)
# set its nJoint value as n:
cmds.setAttr(self.cvJointLoc+".nJoint", n)
# parent it to the lastGuide:
cmds.parent(self.cvJointLoc, self.guideName+"_JointLoc"+str(n-1), relative=True)
cmds.setAttr(self.cvJointLoc+".translateZ", 2)
# create a joint to use like an arrowLine:
self.jGuide = cmds.joint(name=self.guideName+"_JGuide"+str(n), radius=0.001)
cmds.setAttr(self.jGuide+".template", 1)
#Prevent a intermidiate node to be added
cmds.parent(self.jGuide, self.guideName+"_JGuide"+str(n-1), relative=True)
#Do not maintain offset and ensure cv will be at the same place than the joint
cmds.parentConstraint(self.cvJointLoc, self.jGuide, maintainOffset=False, name=self.jGuide+"_ParentConstraint")
cmds.scaleConstraint(self.cvJointLoc, self.jGuide, maintainOffset=False, name=self.jGuide+"_ScaleConstraint")
elif self.enteredNJoints < self.currentNJoints:
# re-define cvEndJoint:
self.cvJointLoc = self.guideName+"_JointLoc"+str(self.enteredNJoints)
self.cvEndJoint = self.guideName+"_JointEnd"
self.jGuide = self.guideName+"_JGuide"+str(self.enteredNJoints)
# re-parent the children guides:
childrenGuideBellowList = utils.getGuideChildrenList(self.cvJointLoc)
if childrenGuideBellowList:
for childGuide in childrenGuideBellowList:
cmds.parent(childGuide, self.cvJointLoc)
# delete difference of nJoints:
cmds.delete(self.guideName+"_JointLoc"+str(self.enteredNJoints+1))
cmds.delete(self.guideName+"_JGuide"+str(self.enteredNJoints+1))
# re-parent cvEndJoint:
pTempParent = cmds.listRelatives(self.cvEndJoint, p=True)
cmds.parent(self.cvEndJoint, self.cvJointLoc)
#Ensure to remove temp parent from the unparenting done on the end joint
if pTempParent:
cmds.delete(pTempParent)
cmds.setAttr(self.cvEndJoint+".tz", 1.3)
pTempParent = cmds.listRelatives(self.jGuideEnd, p=True)
cmds.parent(self.jGuideEnd, self.jGuide, relative=True)
if pTempParent:
cmds.delete(pTempParent)
cmds.setAttr(self.moduleGrp+".nJoints", self.enteredNJoints)
self.currentNJoints = self.enteredNJoints
# re-build the preview mirror:
Layout.LayoutClass.createPreviewMirror(self)
cmds.select(self.moduleGrp)
def createGuide(self, *args):
Base.StartClass.createGuide(self)
# Custom GUIDE:
cmds.setAttr(self.moduleGrp+".moduleNamespace", self.moduleGrp[:self.moduleGrp.rfind(":")], type='string')
# create cvJointLoc and cvLocators:
self.cvNeckLoc, shapeSizeCH = ctrls.cvJointLoc(ctrlName=self.guideName+"_neck", r=0.5)
self.connectShapeSize(shapeSizeCH)
self.cvHeadLoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName+"_head", r=0.4)
self.connectShapeSize(shapeSizeCH)
self.cvJawLoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName+"_jaw", r=0.3)
self.connectShapeSize(shapeSizeCH)
self.cvChinLoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName+"_chin", r=0.3)
self.connectShapeSize(shapeSizeCH)
self.cvLLipLoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName+"_lLip", r=0.1)
self.connectShapeSize(shapeSizeCH)
self.cvRLipLoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName+"_rLip", r=0.1)
self.connectShapeSize(shapeSizeCH)
# create jointGuides:
self.jGuideNeck = cmds.joint(name=self.guideName+"_JGuideNeck", radius=0.001)
self.jGuideHead = cmds.joint(name=self.guideName+"_JGuideHead", radius=0.001)
self.jGuideJaw = cmds.joint(name=self.guideName+"_JGuideJaw", radius=0.001)
self.jGuideChin = cmds.joint(name=self.guideName+"_JGuideChin", radius=0.001)
# set jointGuides as templates:
cmds.setAttr(self.jGuideNeck+".template", 1)
cmds.setAttr(self.jGuideHead+".template", 1)
cmds.setAttr(self.jGuideJaw+".template", 1)
cmds.setAttr(self.jGuideChin+".template", 1)
cmds.parent(self.jGuideNeck, self.moduleGrp, relative=True)
# create cvEnd:
self.cvEndJoint, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName+"_JointEnd", r=0.1)
self.connectShapeSize(shapeSizeCH)
cmds.parent(self.cvEndJoint, self.cvChinLoc)
cmds.setAttr(self.cvEndJoint+".tz", ctrls.dpCheckLinearUnit(1.3))
self.jGuideEnd = cmds.joint(name=self.guideName+"_JGuideEnd", radius=0.001)
cmds.setAttr(self.jGuideEnd+".template", 1)
cmds.parent(self.jGuideEnd, self.jGuideChin)
# make parents between cvLocs:
cmds.parent(self.cvNeckLoc, self.moduleGrp)
cmds.parent(self.cvHeadLoc, self.cvNeckLoc)
cmds.parent(self.cvJawLoc, self.cvHeadLoc)
cmds.parent(self.cvChinLoc, self.cvJawLoc)
cmds.parent(self.cvLLipLoc, self.cvJawLoc)
cmds.parent(self.cvRLipLoc, self.cvJawLoc)
# connect cvLocs in jointGuides:
ctrls.directConnect(self.cvNeckLoc, self.jGuideNeck, ['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
ctrls.directConnect(self.cvHeadLoc, self.jGuideHead, ['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
ctrls.directConnect(self.cvJawLoc, self.jGuideJaw, ['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
ctrls.directConnect(self.cvChinLoc, self.jGuideChin, ['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
ctrls.directConnect(self.cvEndJoint, self.jGuideEnd, ['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
# limit, lock and hide cvEnd:
cmds.transformLimits(self.cvEndJoint, tz=(0.01, 1), etz=(True, False))
ctrls.setLockHide([self.cvEndJoint], ['tx', 'ty', 'rx', 'ry', 'rz', 'sx', 'sy', 'sz'])
# transform cvLocs in order to put as a good head guide:
cmds.setAttr(self.cvNeckLoc+".rotateY", -10)
cmds.setAttr(self.cvHeadLoc+".translateZ", 2)
cmds.setAttr(self.cvHeadLoc+".rotateY", 5)
cmds.setAttr(self.cvJawLoc+".translateX", -0.5)
cmds.setAttr(self.cvJawLoc+".translateZ", 1.25)
cmds.setAttr(self.cvJawLoc+".rotateY", -95)
cmds.setAttr(self.cvChinLoc+".translateZ", 0.25)
cmds.setAttr(self.moduleGrp+".rotateX", -90)
cmds.setAttr(self.moduleGrp+".rotateY", 90)
# lip cvLocs:
cmds.setAttr(self.cvLLipLoc+".translateY", -0.5)
cmds.setAttr(self.cvLLipLoc+".translateZ", 1)
self.lipMD = cmds.createNode("multiplyDivide", name=self.guideName+"_lip_MD")
cmds.connectAttr(self.cvLLipLoc+".translateX", self.lipMD+".input1X", force=True)
cmds.connectAttr(self.cvLLipLoc+".translateY", self.lipMD+".input1Y", force=True)
cmds.connectAttr(self.cvLLipLoc+".translateZ", self.lipMD+".input1Z", force=True)
cmds.connectAttr(self.lipMD+".outputX", self.cvRLipLoc+".translateX", force=True)
cmds.connectAttr(self.lipMD+".outputY", self.cvRLipLoc+".translateY", force=True)
cmds.connectAttr(self.lipMD+".outputZ", self.cvRLipLoc+".translateZ", force=True)
cmds.setAttr(self.lipMD+".input2Y", -1)
def changeJointNumber(self, enteredNJoints, *args):
""" Edit the number of joints in the guide.
"""
utils.useDefaultRenderLayer()
# get the number of joints entered by user:
if enteredNJoints == 0:
try:
self.enteredNJoints = cmds.intField(self.nJointsIF, query=True, value=True)
except:
return
else:
self.enteredNJoints = enteredNJoints
# get the number of joints existing:
self.currentNJoints = cmds.getAttr(self.moduleGrp+".nJoints")
# start analisys the difference between values:
if self.enteredNJoints != self.currentNJoints:
# unparent temporarely the Ends:
self.cvEndJoint = self.guideName+"_JointEnd"
cmds.parent(self.cvEndJoint, world=True)
self.jGuideEnd = (self.guideName+"_JGuideEnd")
cmds.parent(self.jGuideEnd, world=True)
# verify if the nJoints is greather or less than the current
if self.enteredNJoints > self.currentNJoints:
for n in range(self.currentNJoints+1, self.enteredNJoints+1):
# create another N cvJointLoc:
self.cvJointLoc, shapeSizeCH = ctrls.cvJointLoc( ctrlName=self.guideName+"_JointLoc"+str(n), r=0.2 )
self.connectShapeSize(shapeSizeCH)
# set its nJoint value as n:
cmds.setAttr(self.cvJointLoc+".nJoint", n)
# parent it to the lastGuide:
cmds.parent(self.cvJointLoc, self.guideName+"_JointLoc"+str(n-1), relative=True)
cmds.setAttr(self.cvJointLoc+".translateZ", 1)
cmds.setAttr(self.cvJointLoc+".rotateY", -1)
# create a joint to use like an arrowLine:
self.jGuide = cmds.joint(name=self.guideName+"_JGuide"+str(n), radius=0.001)
cmds.setAttr(self.jGuide+".template", 1)
cmds.parent(self.jGuide, self.guideName+"_JGuide"+str(n-1))
ctrls.directConnect(self.cvJointLoc, self.jGuide, ['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
elif self.enteredNJoints < self.currentNJoints:
# re-define cvEndJoint:
self.cvJointLoc = self.guideName+"_JointLoc"+str(self.enteredNJoints)
self.cvEndJoint = self.guideName+"_JointEnd"
self.jGuide = self.guideName+"_JGuide"+str(self.enteredNJoints)
# re-parent the children guides:
childrenGuideBellowList = utils.getGuideChildrenList(self.cvJointLoc)
if childrenGuideBellowList:
for childGuide in childrenGuideBellowList:
cmds.parent(childGuide, self.cvJointLoc)
# delete difference of nJoints:
cmds.delete(self.guideName+"_JointLoc"+str(self.enteredNJoints+1))
cmds.delete(self.guideName+"_JGuide"+str(self.enteredNJoints+1))
# re-parent cvEndJoint:
cmds.parent(self.cvEndJoint, self.cvJointLoc)
cmds.setAttr(self.cvEndJoint+".tz", 1.3)
cmds.parent(self.jGuideEnd, self.jGuide)
# actualise the nJoints in the moduleGrp:
cmds.setAttr(self.moduleGrp+".nJoints", self.enteredNJoints)
self.currentNJoints = self.enteredNJoints
# re-build the preview mirror:
Layout.LayoutClass.createPreviewMirror(self)
cmds.select(self.moduleGrp)
def changeJointNumber(self, enteredNJoints, *args):
""" Edit the number of joints in the guide.
"""
utils.useDefaultRenderLayer()
# get the number of joints entered by user:
if enteredNJoints == 0:
try:
self.enteredNJoints = cmds.intField(self.nJointsIF, query=True, value=True)
except:
return
else:
self.enteredNJoints = enteredNJoints
# get the number of joints existing:
self.currentNJoints = cmds.getAttr(self.moduleGrp+".nJoints")
# start analisys the difference between values:
if self.enteredNJoints != self.currentNJoints:
# check if the controls have scale changed values in order to avoid the transform groups created from maya without namespace:
scaledCtrl = False
scaledCtrlDic = {}
for j in range(1, self.currentNJoints+1):
if cmds.getAttr(self.guideName+"_JointLoc"+str(j)+".scaleX") != 1 or cmds.getAttr(self.guideName+"_JointLoc"+str(j)+".scaleY") != 1 or cmds.getAttr(self.guideName+"_JointLoc"+str(j)+".scaleZ") != 1:
scaledCtrl = True
# get scale values:
scaledX = cmds.getAttr(self.guideName+"_JointLoc"+str(j)+".scaleX")
scaledY = cmds.getAttr(self.guideName+"_JointLoc"+str(j)+".scaleY")
scaledZ = cmds.getAttr(self.guideName+"_JointLoc"+str(j)+".scaleZ")
# store scale values in the dictionary:
scaledCtrlDic[j] = [scaledX, scaledY, scaledZ]
# reset scales values to 1,1,1:
cmds.setAttr(self.guideName+"_JointLoc"+str(j)+".scaleX", 1)
cmds.setAttr(self.guideName+"_JointLoc"+str(j)+".scaleY", 1)
cmds.setAttr(self.guideName+"_JointLoc"+str(j)+".scaleZ", 1)
# unparent temporarely the Ends:
self.cvEndJoint = self.guideName+"_JointEnd"
cmds.parent(self.cvEndJoint, world=True)
self.jGuideEnd = (self.guideName+"_JGuideEnd")
cmds.parent(self.jGuideEnd, world=True)
# verify if the nJoints is greather or less than the current
if self.enteredNJoints > self.currentNJoints:
for n in range(self.currentNJoints+1, self.enteredNJoints+1):
# create another N cvJointLoc:
self.cvJointLoc, shapeSizeCH = ctrls.cvJointLoc( ctrlName=self.guideName+"_JointLoc"+str(n), r=0.3 )
self.connectShapeSize(shapeSizeCH)
# set its nJoint value as n:
cmds.setAttr(self.cvJointLoc+".nJoint", n)
# parent it to the lastGuide:
cmds.parent(self.cvJointLoc, self.guideName+"_JointLoc"+str(n-1), relative=True)
cmds.setAttr(self.cvJointLoc+".translateZ", 2)
# create a joint to use like an arrowLine:
self.jGuide = cmds.joint(name=self.guideName+"_JGuide"+str(n), radius=0.001)
cmds.setAttr(self.jGuide+".template", 1)
cmds.parent(self.jGuide, self.guideName+"_JGuide"+str(n-1))
cmds.parentConstraint(self.cvJointLoc, self.jGuide, maintainOffset=True, name=self.jGuide+"_ParentConstraint")
cmds.scaleConstraint(self.cvJointLoc, self.jGuide, maintainOffset=True, name=self.jGuide+"_ScaleConstraint")
elif self.enteredNJoints < self.currentNJoints:
# re-define cvEndJoint:
self.cvJointLoc = self.guideName+"_JointLoc"+str(self.enteredNJoints)
self.cvEndJoint = self.guideName+"_JointEnd"
self.jGuide = self.guideName+"_JGuide"+str(self.enteredNJoints)
# re-parent the children guides:
childrenGuideBellowList = utils.getGuideChildrenList(self.cvJointLoc)
if childrenGuideBellowList:
for childGuide in childrenGuideBellowList:
cmds.parent(childGuide, self.cvJointLoc)
# delete difference of nJoints:
cmds.delete(self.guideName+"_JointLoc"+str(self.enteredNJoints+1))
cmds.delete(self.guideName+"_JGuide"+str(self.enteredNJoints+1))
# re-parent cvEndJoint:
cmds.parent(self.cvEndJoint, self.cvJointLoc)
cmds.setAttr(self.cvEndJoint+".tz", 1.3)
cmds.parent(self.jGuideEnd, self.jGuide)
# actualise the nJoints in the moduleGrp:
cmds.setAttr(self.moduleGrp+".nJoints", self.enteredNJoints)
self.currentNJoints = self.enteredNJoints
# reset changed scale values again:
if scaledCtrl:
for j in scaledCtrlDic:
if cmds.objExists(self.guideName+"_JointLoc"+str(j)):
cmds.setAttr(self.guideName+"_JointLoc"+str(j)+".scaleX", scaledCtrlDic[j][0])
cmds.setAttr(self.guideName+"_JointLoc"+str(j)+".scaleY", scaledCtrlDic[j][1])
cmds.setAttr(self.guideName+"_JointLoc"+str(j)+".scaleZ", scaledCtrlDic[j][2])
# re-build the preview mirror:
Layout.LayoutClass.createPreviewMirror(self)
cmds.select(self.moduleGrp)
def changeJointNumber(self, enteredNJoints, *args):
""" Edit the number of joints in the guide.
"""
utils.useDefaultRenderLayer()
# get the number of joints entered by user:
if enteredNJoints == 0:
try:
self.enteredNJoints = cmds.intField(self.nJointsIF, query=True, value=True)
except:
return
else:
self.enteredNJoints = enteredNJoints
# get the number of joints existing:
self.currentNJoints = cmds.getAttr(self.moduleGrp + ".nJoints")
# start analisys the difference between values:
if self.enteredNJoints != self.currentNJoints:
# unparent temporarely the Ends:
self.cvEndJoint = self.guideName + "_JointEnd"
cmds.parent(self.cvEndJoint, world=True)
self.jGuideEnd = (self.guideName + "_JGuideEnd")
cmds.parent(self.jGuideEnd, world=True)
# verify if the nJoints is greather or less than the current
if self.enteredNJoints > self.currentNJoints:
for n in range(self.currentNJoints + 1, self.enteredNJoints + 1):
# create another N cvJointLoc:
self.cvJointLoc, shapeSizeCH = ctrls.cvJointLoc(ctrlName=self.guideName + "_JointLoc" + str(n),
r=0.2)
self.connectShapeSize(shapeSizeCH)
# set its nJoint value as n:
cmds.setAttr(self.cvJointLoc + ".nJoint", n)
# parent it to the lastGuide:
cmds.parent(self.cvJointLoc, self.guideName + "_JointLoc" + str(n - 1), relative=True)
cmds.setAttr(self.cvJointLoc + ".translateZ", 1)
cmds.setAttr(self.cvJointLoc + ".rotateY", -1)
# create a joint to use like an arrowLine:
self.jGuide = cmds.joint(name=self.guideName + "_JGuide" + str(n), radius=0.001)
cmds.setAttr(self.jGuide + ".template", 1)
cmds.parent(self.jGuide, self.guideName + "_JGuide" + str(n - 1))
ctrls.directConnect(self.cvJointLoc, self.jGuide, ['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
elif self.enteredNJoints < self.currentNJoints:
# re-define cvEndJoint:
self.cvJointLoc = self.guideName + "_JointLoc" + str(self.enteredNJoints)
self.cvEndJoint = self.guideName + "_JointEnd"
self.jGuide = self.guideName + "_JGuide" + str(self.enteredNJoints)
# re-parent the children guides:
childrenGuideBellowList = utils.getGuideChildrenList(self.cvJointLoc)
if childrenGuideBellowList:
for childGuide in childrenGuideBellowList:
cmds.parent(childGuide, self.cvJointLoc)
# delete difference of nJoints:
cmds.delete(self.guideName + "_JointLoc" + str(self.enteredNJoints + 1))
cmds.delete(self.guideName + "_JGuide" + str(self.enteredNJoints + 1))
# re-parent cvEndJoint:
cmds.parent(self.cvEndJoint, self.cvJointLoc)
cmds.setAttr(self.cvEndJoint + ".tz", 1.3)
cmds.parent(self.jGuideEnd, self.jGuide)
# actualise the nJoints in the moduleGrp:
cmds.setAttr(self.moduleGrp + ".nJoints", self.enteredNJoints)
self.currentNJoints = self.enteredNJoints
# re-build the preview mirror:
Layout.LayoutClass.createPreviewMirror(self)
cmds.select(self.moduleGrp)
def createGuide(self, *args):
Base.StartClass.createGuide(self)
# Custom GUIDE:
cmds.setAttr(self.moduleGrp + ".moduleNamespace",
self.moduleGrp[:self.moduleGrp.rfind(":")],
type='string')
# create cvJointLoc and cvLocators:
self.cvNeckLoc, shapeSizeCH = ctrls.cvJointLoc(
ctrlName=self.guideName + "_neck", r=0.5)
self.connectShapeSize(shapeSizeCH)
self.cvHeadLoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName +
"_head",
r=0.4)
self.connectShapeSize(shapeSizeCH)
self.cvJawLoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName +
"_jaw",
r=0.3)
self.connectShapeSize(shapeSizeCH)
self.cvChinLoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName +
"_chin",
r=0.3)
self.connectShapeSize(shapeSizeCH)
self.cvLLipLoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName +
"_lLip",
r=0.1)
self.connectShapeSize(shapeSizeCH)
self.cvRLipLoc, shapeSizeCH = ctrls.cvLocator(ctrlName=self.guideName +
"_rLip",
r=0.1)
self.connectShapeSize(shapeSizeCH)
# create jointGuides:
self.jGuideNeck = cmds.joint(name=self.guideName + "_JGuideNeck",
radius=0.001)
self.jGuideHead = cmds.joint(name=self.guideName + "_JGuideHead",
radius=0.001)
self.jGuideJaw = cmds.joint(name=self.guideName + "_JGuideJaw",
radius=0.001)
self.jGuideChin = cmds.joint(name=self.guideName + "_JGuideChin",
radius=0.001)
# set jointGuides as templates:
cmds.setAttr(self.jGuideNeck + ".template", 1)
cmds.setAttr(self.jGuideHead + ".template", 1)
cmds.setAttr(self.jGuideJaw + ".template", 1)
cmds.setAttr(self.jGuideChin + ".template", 1)
cmds.parent(self.jGuideNeck, self.moduleGrp, relative=True)
# create cvEnd:
self.cvEndJoint, shapeSizeCH = ctrls.cvLocator(
ctrlName=self.guideName + "_JointEnd", r=0.1)
self.connectShapeSize(shapeSizeCH)
cmds.parent(self.cvEndJoint, self.cvChinLoc)
cmds.setAttr(self.cvEndJoint + ".tz", ctrls.dpCheckLinearUnit(1.3))
self.jGuideEnd = cmds.joint(name=self.guideName + "_JGuideEnd",
radius=0.001)
cmds.setAttr(self.jGuideEnd + ".template", 1)
cmds.parent(self.jGuideEnd, self.jGuideChin)
# make parents between cvLocs:
cmds.parent(self.cvNeckLoc, self.moduleGrp)
cmds.parent(self.cvHeadLoc, self.cvNeckLoc)
cmds.parent(self.cvJawLoc, self.cvHeadLoc)
cmds.parent(self.cvChinLoc, self.cvJawLoc)
cmds.parent(self.cvLLipLoc, self.cvJawLoc)
cmds.parent(self.cvRLipLoc, self.cvJawLoc)
# connect cvLocs in jointGuides:
ctrls.directConnect(self.cvNeckLoc, self.jGuideNeck,
['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
ctrls.directConnect(self.cvHeadLoc, self.jGuideHead,
['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
ctrls.directConnect(self.cvJawLoc, self.jGuideJaw,
['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
ctrls.directConnect(self.cvChinLoc, self.jGuideChin,
['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
ctrls.directConnect(self.cvEndJoint, self.jGuideEnd,
['tx', 'ty', 'tz', 'rx', 'ry', 'rz'])
# limit, lock and hide cvEnd:
cmds.transformLimits(self.cvEndJoint, tz=(0.01, 1), etz=(True, False))
ctrls.setLockHide([self.cvEndJoint],
['tx', 'ty', 'rx', 'ry', 'rz', 'sx', 'sy', 'sz'])
# transform cvLocs in order to put as a good head guide:
cmds.setAttr(self.cvNeckLoc + ".rotateY", -10)
cmds.setAttr(self.cvHeadLoc + ".translateZ", 2)
cmds.setAttr(self.cvHeadLoc + ".rotateY", 5)
cmds.setAttr(self.cvJawLoc + ".translateX", -0.5)
cmds.setAttr(self.cvJawLoc + ".translateZ", 1.25)
cmds.setAttr(self.cvJawLoc + ".rotateY", -95)
cmds.setAttr(self.cvChinLoc + ".translateZ", 0.25)
cmds.setAttr(self.moduleGrp + ".rotateX", -90)
cmds.setAttr(self.moduleGrp + ".rotateY", 90)
# lip cvLocs:
cmds.setAttr(self.cvLLipLoc + ".translateY", -0.5)
cmds.setAttr(self.cvLLipLoc + ".translateZ", 1)
self.lipMD = cmds.createNode("multiplyDivide",
name=self.guideName + "_lip_MD")
cmds.connectAttr(self.cvLLipLoc + ".translateX",
self.lipMD + ".input1X",
force=True)
cmds.connectAttr(self.cvLLipLoc + ".translateY",
self.lipMD + ".input1Y",
force=True)
cmds.connectAttr(self.cvLLipLoc + ".translateZ",
self.lipMD + ".input1Z",
force=True)
cmds.connectAttr(self.lipMD + ".outputX",
self.cvRLipLoc + ".translateX",
force=True)
cmds.connectAttr(self.lipMD + ".outputY",
self.cvRLipLoc + ".translateY",
force=True)
cmds.connectAttr(self.lipMD + ".outputZ",
self.cvRLipLoc + ".translateZ",
force=True)
cmds.setAttr(self.lipMD + ".input2Y", -1)
def changeJointNumber(self, enteredNJoints, *args):
""" Edit the number of joints in the guide.
"""
utils.useDefaultRenderLayer()
# get the number of joints entered by user:
if enteredNJoints == 0:
try:
self.enteredNJoints = cmds.intField(self.nJointsIF,
query=True,
value=True)
except:
return
else:
self.enteredNJoints = enteredNJoints
# get the number of joints existing:
self.currentNJoints = cmds.getAttr(self.moduleGrp + ".nJoints")
# start analisys the difference between values:
if self.enteredNJoints != self.currentNJoints:
# check if the controls have scale changed values in order to avoid the transform groups created from maya without namespace:
scaledCtrl = False
scaledCtrlDic = {}
for j in range(1, self.currentNJoints + 1):
if cmds.getAttr(self.guideName + "_JointLoc" + str(j) +
".scaleX") != 1 or cmds.getAttr(
self.guideName + "_JointLoc" + str(j) +
".scaleY") != 1 or cmds.getAttr(
self.guideName + "_JointLoc" + str(j) +
".scaleZ") != 1:
scaledCtrl = True
# get scale values:
scaledX = cmds.getAttr(self.guideName + "_JointLoc" +
str(j) + ".scaleX")
scaledY = cmds.getAttr(self.guideName + "_JointLoc" +
str(j) + ".scaleY")
scaledZ = cmds.getAttr(self.guideName + "_JointLoc" +
str(j) + ".scaleZ")
# store scale values in the dictionary:
scaledCtrlDic[j] = [scaledX, scaledY, scaledZ]
# reset scales values to 1,1,1:
cmds.setAttr(
self.guideName + "_JointLoc" + str(j) + ".scaleX", 1)
cmds.setAttr(
self.guideName + "_JointLoc" + str(j) + ".scaleY", 1)
cmds.setAttr(
self.guideName + "_JointLoc" + str(j) + ".scaleZ", 1)
# unparent temporarely the Ends:
self.cvEndJoint = self.guideName + "_JointEnd"
cmds.parent(self.cvEndJoint, world=True)
self.jGuideEnd = (self.guideName + "_JGuideEnd")
cmds.parent(self.jGuideEnd, world=True)
# verify if the nJoints is greather or less than the current
if self.enteredNJoints > self.currentNJoints:
for n in range(self.currentNJoints + 1,
self.enteredNJoints + 1):
# create another N cvJointLoc:
self.cvJointLoc, shapeSizeCH = ctrls.cvJointLoc(
ctrlName=self.guideName + "_JointLoc" + str(n), r=0.3)
self.connectShapeSize(shapeSizeCH)
# set its nJoint value as n:
cmds.setAttr(self.cvJointLoc + ".nJoint", n)
# parent it to the lastGuide:
cmds.parent(self.cvJointLoc,
self.guideName + "_JointLoc" + str(n - 1),
relative=True)
cmds.setAttr(self.cvJointLoc + ".translateZ", 2)
# create a joint to use like an arrowLine:
self.jGuide = cmds.joint(name=self.guideName + "_JGuide" +
str(n),
radius=0.001)
cmds.setAttr(self.jGuide + ".template", 1)
cmds.parent(self.jGuide,
self.guideName + "_JGuide" + str(n - 1))
cmds.parentConstraint(self.cvJointLoc,
self.jGuide,
maintainOffset=True,
name=self.jGuide +
"_ParentConstraint")
cmds.scaleConstraint(self.cvJointLoc,
self.jGuide,
maintainOffset=True,
name=self.jGuide + "_ScaleConstraint")
elif self.enteredNJoints < self.currentNJoints:
# re-define cvEndJoint:
self.cvJointLoc = self.guideName + "_JointLoc" + str(
self.enteredNJoints)
self.cvEndJoint = self.guideName + "_JointEnd"
self.jGuide = self.guideName + "_JGuide" + str(
self.enteredNJoints)
# re-parent the children guides:
childrenGuideBellowList = utils.getGuideChildrenList(
self.cvJointLoc)
if childrenGuideBellowList:
for childGuide in childrenGuideBellowList:
cmds.parent(childGuide, self.cvJointLoc)
# delete difference of nJoints:
cmds.delete(self.guideName + "_JointLoc" +
str(self.enteredNJoints + 1))
cmds.delete(self.guideName + "_JGuide" +
str(self.enteredNJoints + 1))
# re-parent cvEndJoint:
cmds.parent(self.cvEndJoint, self.cvJointLoc)
cmds.setAttr(self.cvEndJoint + ".tz", 1.3)
cmds.parent(self.jGuideEnd, self.jGuide)
# actualise the nJoints in the moduleGrp:
cmds.setAttr(self.moduleGrp + ".nJoints", self.enteredNJoints)
self.currentNJoints = self.enteredNJoints
# reset changed scale values again:
if scaledCtrl:
for j in scaledCtrlDic:
if cmds.objExists(self.guideName + "_JointLoc" + str(j)):
cmds.setAttr(
self.guideName + "_JointLoc" + str(j) + ".scaleX",
scaledCtrlDic[j][0])
cmds.setAttr(
self.guideName + "_JointLoc" + str(j) + ".scaleY",
scaledCtrlDic[j][1])
cmds.setAttr(
self.guideName + "_JointLoc" + str(j) + ".scaleZ",
scaledCtrlDic[j][2])
# re-build the preview mirror:
Layout.LayoutClass.createPreviewMirror(self)
cmds.select(self.moduleGrp)
