def test_is_all_1(self):
profile = SigfoxProfile("UPLINK", "ACK ON ERROR", 1)
rule_id = "0" * profile.RULE_ID_SIZE
dtag = "0" * profile.T
w = "0" * profile.M
fcn = "1" * profile.N
header = bitstring_to_bytes(rule_id + dtag + w + fcn)
payload = bytearray.fromhex("3131313231333134313531")
fragment = Fragment(profile, [header, payload])
self.assertTrue(fragment.is_all_1())
def before_request():
g.start = time.time()
g.current_fragment = {}
print('[before_request]: ' + request.endpoint)
if request.endpoint == 'wyschc_get':
if request.method == 'POST':
print("[before_request]: POST RECEIVED")
# BUCKET_NAME = config.BUCKET_NAME
request_dict = request.get_json()
print('[before_request]: Received Sigfox message: {}'.format(
request_dict))
# Get data and Sigfox Sequence Number.
fragment = request_dict["data"]
sigfox_sequence_number = request_dict["seqNumber"]
device = request_dict['device']
print('[before_request]: Data received from device id:{}, data:{}'.
format(device, request_dict['data']))
# Parse fragment into "fragment = [header, payload]
header_bytes = None
header_first_hex = fragment[:1]
if (header_first_hex) == '0' or '1':
header = bytes.fromhex(fragment[:2])
payload = bytearray.fromhex(fragment[2:])
header_bytes = 1
elif (header_first_hex) == '2':
header = bytearray.fromhex(fragment[:4])
payload = bytearray.fromhex(fragment[4:])
header_bytes = 2
else:
print("Wrong header in fragment")
return 'wrong header', 204
data = [header, payload]
# Initialize SCHC variables.
profile_uplink = Sigfox("UPLINK", "ACK ON ERROR", header_bytes)
profile_downlink = Sigfox("DOWNLINK", "NO ACK", header_bytes)
buffer_size = profile_uplink.MTU
n = profile_uplink.N
m = profile_uplink.M
# Convert to a Fragment class for easier manipulation.
fragment_message = Fragment(profile_uplink, data)
# Get some SCHC values from the fragment.
rule_id = fragment_message.header.RULE_ID
dtag = fragment_message.header.DTAG
w = fragment_message.header.W
g.current_fragment['s-downlink_enable'] = request_dict['ack']
g.current_fragment['s-sending_start'] = time.time()
g.current_fragment['s-data'] = request_dict["data"]
g.current_fragment['FCN'] = fragment_message.header.FCN
g.current_fragment['s-fragment_size'] = len(data)
g.current_fragment['RULE_ID'] = fragment_message.header.RULE_ID
g.current_fragment['W'] = fragment_message.header.W
g.current_fragment['seqNumber'] = sigfox_sequence_number
print('[before_request]: seqNum:{}, RULE_ID: {} W: {}, FCN: {}'.
format(sigfox_sequence_number,
fragment_message.header.RULE_ID,
fragment_message.header.W,
fragment_message.header.FCN))
print('[before_request]: {}'.format(g.current_fragment))
def start_session(self):
self.CURRENT_WINDOW = 0
total_size = len(self.MESSAGE)
current_size = 0
logging = self.LOGGER is not None and self.LOGGER.JSON_FILE is not None
if logging:
self.LOGGER.START_SENDING_TIME = self.LOGGER.CHRONO.read()
self.LOGGER.TOTAL_SIZE = total_size
self.LOGGER.FINISHED = False
while self.FRAGMENT_INDEX < len(self.FRAGMENTS):
fragment = Fragment(self.PROFILE, self.FRAGMENTS[self.FRAGMENT_INDEX])
current_size += len(self.FRAGMENTS[self.FRAGMENT_INDEX][1])
percent = round(float(current_size) / float(total_size) * 100, 2)
if logging:
self.LOGGER.info("Sending...")
self.LOGGER.LAPS.append(self.LOGGER.CHRONO.read())
self.LOGGER.debug("laps - > {}".format(self.LOGGER.LAPS))
self.LOGGER.debug("--------------------------")
self.LOGGER.debug("{} fragment:".format(ordinal(self.FRAGMENT_INDEX)))
self.LOGGER.debug("RuleID:{}, DTAG:{}, WINDOW:{}, FCN:{}".format(fragment.HEADER.RULE_ID,
fragment.HEADER.DTAG,
fragment.HEADER.W,
fragment.HEADER.FCN))
self.LOGGER.debug("SCHC Fragment: {}".format(fragment.to_string()))
self.LOGGER.debug("SCHC Fragment Payload: {}".format(fragment.PAYLOAD))
self.LOGGER.debug("{} / {}, {}%".format(current_size,
total_size,
percent))
try:
self.schc_send(fragment)
except SCHCError:
if logging:
self.LOGGER.FINISHED = False
break
if logging:
self.LOGGER.END_SENDING_TIME = self.LOGGER.CHRONO.read()
self.LOGGER.save()
def __init__(self, profile, schc_fragments): self.profile = profile for fragment in schc_fragments: if fragment != b'': self.schc_fragments.append(Fragment(self.profile, fragment)) for fragment in self.schc_fragments: self.rule_set.add(fragment.header.RULE_ID) self.dtag_set.add(fragment.header.DTAG) self.window_set.add(fragment.header.W) self.fcn_set.add(fragment.header.FCN)
def test_init(self):
hex_data = "053131313231333134313531"
header = bytes.fromhex(hex_data[:2])
payload = bytearray.fromhex(hex_data[2:])
data = [header, payload]
profile = SigfoxProfile("UPLINK", "ACK ON ERROR", 1)
fragment = Fragment(profile, data)
abort = ReceiverAbort(profile, fragment.HEADER)
self.assertEqual(type(abort.PROFILE), SigfoxProfile)
self.assertEqual(abort.HEADER.RULE_ID, fragment.HEADER.RULE_ID)
self.assertEqual(abort.HEADER.DTAG, fragment.HEADER.DTAG)
self.assertEqual(abort.HEADER.W, fragment.HEADER.W)
self.assertEqual(len(abort.to_string()), 64)
self.assertTrue(issubclass(type(abort), ACK))
self.assertTrue(abort.is_receiver_abort())
def test_init(self):
hex_data = "053131313231333134313531"
header = bytes.fromhex(hex_data[:2])
payload = bytearray.fromhex(hex_data[2:])
data = [header, payload]
profile = Sigfox("UPLINK", "ACK ON ERROR", 1)
fragment = Fragment(profile, data)
abort = SenderAbort(profile, fragment.header)
self.assertEqual(type(abort.profile), Sigfox)
self.assertEqual(abort.header.RULE_ID, fragment.header.RULE_ID)
self.assertEqual(abort.header.DTAG, fragment.header.DTAG)
self.assertEqual(abort.header.W, fragment.header.W)
self.assertTrue(
abort.header.FCN[0] == '1' and all(abort.header.FCN),
msg=f"{abort.header.FCN[0] == '1'} and {all(abort.header.FCN)}")
self.assertTrue(
abort.payload.decode()[0] == '0' and all(abort.payload.decode()),
msg=f"{abort.payload[0] == '0'} and {all(abort.payload)}")
self.assertFalse(abort.is_all_1())
self.assertTrue(abort.is_sender_abort())
def test_init(self):
hex_data = "053131313231333134313531"
header = bytes.fromhex(hex_data[:2])
payload = bytearray.fromhex(hex_data[2:])
data = [header, payload]
profile = SigfoxProfile("UPLINK", "ACK ON ERROR", 1)
fragment = Fragment(profile, data)
abort = SenderAbort(profile, fragment.HEADER)
self.assertEqual(type(abort.PROFILE), SigfoxProfile)
self.assertEqual(abort.HEADER.RULE_ID, fragment.HEADER.RULE_ID)
self.assertEqual(abort.HEADER.DTAG, fragment.HEADER.DTAG)
self.assertEqual(abort.HEADER.W, fragment.HEADER.W)
self.assertTrue(
abort.HEADER.FCN[0] == '1' and all(abort.HEADER.FCN),
msg=f"{abort.HEADER.FCN[0] == '1'} and {all(abort.HEADER.FCN)}")
self.assertTrue(
abort.PAYLOAD.decode()[0] == '0' and all(abort.PAYLOAD.decode()),
msg=f"{abort.PAYLOAD[0] == '0'} and {all(abort.PAYLOAD)}")
self.assertFalse(abort.is_all_1())
self.assertTrue(abort.is_sender_abort())
hex_data = "1f353235"
header = bytes.fromhex(hex_data[:2])
payload = bytearray.fromhex(hex_data[2:])
data = [header, payload]
profile = SigfoxProfile("UPLINK", "ACK ON ERROR", 1)
fragment = Fragment(profile, data)
self.assertFalse(fragment.is_sender_abort())
hex_string = "1f3030303030303030303030"
fragment_sent = Fragment.from_hex(
SigfoxProfile("UPLINK", "ACK ON ERROR", 1), hex_string)
abort = SenderAbort(fragment_sent.PROFILE, fragment_sent.HEADER)
self.assertTrue(abort.is_sender_abort())
def schc_send(self, fragment_sent, retransmit=False):
ack = None
current_fragment = {}
logging = self.LOGGER is not None and self.LOGGER.JSON_FILE is not None
self.TIMER.wait(timeout=self.DELAY, raise_exception=False)
if logging:
self.LOGGER.LOGGING_TIME += self.DELAY
current_fragment = {'RULE_ID': fragment_sent.HEADER.RULE_ID,
'W': fragment_sent.HEADER.W,
'FCN': fragment_sent.HEADER.FCN,
'data': fragment_sent.to_bytes(),
'fragment_size': len(fragment_sent.to_bytes()),
'abort': False,
'sending_start': 0,
'sending_end': 0,
'send_time': 0,
'downlink_enable': False,
'timeout': 0,
'ack_received': False,
'ack': "",
'rssi': 0,
'receiver_abort_received': False,
'receiver_abort_message': ""}
if fragment_sent.is_all_0() and not retransmit:
self.LOGGER.debug("[POST] This is an All-0. Using All-0 SIGFOX_DL_TIMEOUT.")
self.set_timeout(self.PROFILE.SIGFOX_DL_TIMEOUT)
if logging:
current_fragment["timeout"] = self.PROFILE.SIGFOX_DL_TIMEOUT
elif fragment_sent.is_all_1():
self.LOGGER.debug("[POST] This is an All-1. Using RETRANSMISSION_TIMER_VALUE. Increasing ACK attempts.")
self.ATTEMPTS += 1
self.set_timeout(self.PROFILE.RETRANSMISSION_TIMER_VALUE)
if logging:
current_fragment["timeout"] = self.PROFILE.RETRANSMISSION_TIMER_VALUE
else:
self.set_timeout(60)
if logging:
current_fragment["timeout"] = 60
# LoPy should use to_bytes()
data = fragment_sent.to_hex().decode()
self.LOGGER.info("[POST] Posting fragment {} ({})".format(fragment_sent.HEADER.to_string(),
fragment_sent.to_hex()))
if fragment_sent.expects_ack() and not retransmit:
current_fragment['downlink_enable'] = True
else:
current_fragment['downlink_enable'] = False
try:
if logging:
current_fragment['sending_start'] = self.LOGGER.CHRONO.read()
self.send(data, loss=True)
# self.send_mask(fragment_sent)
if fragment_sent.expects_ack() and not retransmit:
if logging:
current_fragment['ack_received'] = False
ack = self.recv(self.PROFILE.DOWNLINK_MTU // 8, loss=True)
# ack = self.recv_mask()
if logging:
current_fragment['sending_end'] = self.LOGGER.CHRONO.read()
current_fragment['send_time'] = current_fragment['sending_end'] - current_fragment['sending_start']
if ack is not None:
current_fragment['rssi'] = self.PROTOCOL.rssi()
self.LOGGER.debug("Response received at: {}: ".format(self.LOGGER.CHRONO.read()))
self.LOGGER.debug('ack -> {}'.format(ack))
self.LOGGER.debug('message RSSI: {}'.format(self.PROTOCOL.rssi()))
if fragment_sent.is_sender_abort():
self.LOGGER.debug("--- senderAbort:{}".format(fragment_sent.to_string()))
self.LOGGER.debug("--- senderAbort:{}".format(fragment_sent.to_bytes()))
if logging:
current_fragment['abort'] = True
self.LOGGER.FRAGMENTS_INFO_ARRAY.append(current_fragment)
self.LOGGER.error("Sent Sender-Abort. Goodbye")
self.LOGGER.SENDER_ABORTED = True
raise SenderAbortError
if not fragment_sent.expects_ack():
if not retransmit:
self.FRAGMENT_INDEX += 1
if logging:
self.LOGGER.FRAGMENTS_INFO_ARRAY.append(current_fragment)
return
if ack is not None:
if logging:
current_fragment['ack'] = ack
current_fragment['ack_received'] = True
self.LOGGER.info("[ACK] Bytes: {}. Ressetting attempts counter to 0.".format(ack))
self.ATTEMPTS = 0
# Parse ACK
# ack_object = ACK.parse_from_bytes(self.PROFILE, ack)
ack_object = ACK.parse_from_hex(self.PROFILE, ack)
if ack_object.is_receiver_abort():
if logging:
current_fragment['receiver_abort_message'] = ack
current_fragment['receiver_abort_received'] = True
self.LOGGER.FRAGMENTS_INFO_ARRAY.append(current_fragment)
self.LOGGER.error("ERROR: Receiver Abort received. Aborting communication.")
self.LOGGER.RECEIVER_ABORTED = True
raise ReceiverAbortError
if not fragment_sent.expects_ack():
self.LOGGER.error("ERROR: ACK received but not requested ({}).".format(ack))
self.LOGGER.FRAGMENTS_INFO_ARRAY.append(current_fragment)
raise UnrequestedACKError
# Extract data from ACK
ack_window = ack_object.HEADER.W
ack_window_number = ack_object.HEADER.WINDOW_NUMBER
c = ack_object.HEADER.C
bitmap = ack_object.BITMAP
self.LOGGER.debug("ACK: {}".format(ack))
self.LOGGER.debug("ACK window: {}".format(ack_window))
self.LOGGER.debug("ACK bitmap: {}".format(bitmap))
self.LOGGER.debug("ACK C bit: {}".format(c))
self.LOGGER.debug("last window: {}".format(self.LAST_WINDOW))
# Save ACKREQ data
self.LOGGER.FRAGMENTS_INFO_ARRAY.append(current_fragment)
# If the W field in the SCHC ACK corresponds to the last window of the SCHC Packet:
if ack_window_number == self.LAST_WINDOW:
# If the C bit is set, the sender MAY exit successfully.
if c == '1':
self.LOGGER.info("Last ACK received, fragments reassembled successfully. End of transmission.")
self.LOGGER.FINISHED = True
self.FRAGMENT_INDEX += 1
return
# Otherwise,
else:
# If the Profile mandates that the last tile be sent in an All-1 SCHC Fragment
# (we are in the last window), .is_all_1() should be true:
if fragment_sent.is_all_1():
# This is the last bitmap, it contains the data before the All-1 fragment.
# The leftmost bit of this bitmap should always be 1, as the All-1 gets to the network
# to request the ACK.
last_bitmap = bitmap[:(len(self.FRAGMENTS) - 1) % self.PROFILE.WINDOW_SIZE]
self.LOGGER.debug("last bitmap {}".format(last_bitmap))
# If the SCHC ACK shows no missing tile at the receiver, abort.
# (C = 0 but transmission complete)
if last_bitmap == '' or (last_bitmap[0] == '1' and is_monochar(last_bitmap)):
self.LOGGER.error("ERROR: SCHC ACK shows no missing tile at the receiver.")
self.schc_send(SenderAbort(fragment_sent.PROFILE, fragment_sent.HEADER))
# Otherwise (fragments are lost),
else:
# Check for lost fragments.
for j in range(len(last_bitmap)):
# If the j-th bit of the bitmap is 0, then the j-th fragment was lost.
if last_bitmap[j] == '0':
self.LOGGER.info("The {} ({} / {}) fragment was lost! "
"Sending again...".format(ordinal(j),
self.PROFILE.WINDOW_SIZE * ack_window_number + j,
len(self.FRAGMENTS)))
# Try sending again the lost fragment.
fragment_to_be_resent = Fragment(self.PROFILE,
self.FRAGMENTS[
self.PROFILE.WINDOW_SIZE * ack_window_number + j])
self.LOGGER.debug("Lost fragment: {}".format(fragment_to_be_resent.to_string()))
self.schc_send(fragment_to_be_resent, retransmit=True)
# Send All-1 again to end communication or check again for lost data.
self.schc_send(fragment_sent)
else:
self.LOGGER.error("ERROR: While being at the last window, the ACK-REQ was not an All-1. "
"This is outside of the Sigfox scope.")
raise BadProfileError
# Otherwise, there are lost fragments in a non-final window.
else:
# Check for lost fragments.
for j in range(len(bitmap)):
# If the j-th bit of the bitmap is 0, then the j-th fragment was lost.
if bitmap[j] == '0':
self.LOGGER.info("The {} ({} / {}) fragment was lost! "
"Sending again...".format(ordinal(j),
self.PROFILE.WINDOW_SIZE * ack_window_number + j,
len(self.FRAGMENTS)))
# Try sending again the lost fragment.
fragment_to_be_resent = Fragment(self.PROFILE,
self.FRAGMENTS[
self.PROFILE.WINDOW_SIZE * ack_window_number + j])
self.LOGGER.debug("Lost fragment: {}".format(fragment_to_be_resent.to_string()))
self.schc_send(fragment_to_be_resent, retransmit=True)
if fragment_sent.is_all_1():
# Send All-1 again to end communication.
self.schc_send(fragment_sent)
elif fragment_sent.is_all_0():
# Continue with next window
self.FRAGMENT_INDEX += 1
self.CURRENT_WINDOW += 1
except SCHCTimeoutError as e:
if logging:
current_fragment['sending_end'] = self.LOGGER.CHRONO.read()
current_fragment['send_time'] = current_fragment['sending_end'] - current_fragment['sending_start']
current_fragment['rssi'] = self.PROTOCOL.rssi()
current_fragment['ack'] = ""
current_fragment['ack_received'] = False
self.LOGGER.info("OSError at: {}: ".format(self.LOGGER.CHRONO.read()))
self.LOGGER.info('OSError number {}, {}'.format(e.args[0], e))
# Save ACKREQ data
if logging:
self.LOGGER.FRAGMENTS_INFO_ARRAY.append(current_fragment)
# If an ACK was expected
if fragment_sent.is_all_1():
# If the attempts counter is strictly less than MAX_ACK_REQUESTS, try again
self.LOGGER.debug("attempts:{}".format(self.ATTEMPTS))
if self.ATTEMPTS < self.PROFILE.MAX_ACK_REQUESTS:
self.LOGGER.info("SCHC Timeout reached while waiting for an ACK. Sending the ACK Request again...")
self.schc_send(fragment_sent, retransmit=False)
# Else, exit with an error.
else:
self.LOGGER.error("ERROR: MAX_ACK_REQUESTS reached. Sending Sender-Abort.")
abort = SenderAbort(self.PROFILE, fragment_sent.HEADER)
self.schc_send(abort)
# If the ACK can be not sent (Sigfox only)
if fragment_sent.is_all_0():
self.LOGGER.info("All-0 timeout reached. Proceeding to next window.")
self.FRAGMENT_INDEX += 1
self.CURRENT_WINDOW += 1
# Else, Sigfox communication failed.
else:
self.LOGGER.error("ERROR: Timeout reached.")
raise NetworkDownError
data = bytes(fragment_list[i][0] + fragment_list[i][1])
if verbose:
print(str(i) + "th fragment:")
print(data)
current_size += len(fragment_list[i][1])
percent = round(float(current_size) / float(total_size) * 100, 2)
# Send the data.
print("Sending...")
the_socket.sendto(data, address)
print(str(current_size) + " / " + str(total_size) + ", " + str(percent) + "%")
# Convert to a Fragment class for easier manipulation.
fragment = Fragment(profile_uplink, fragment_list[i])
# If a fragment is an All-0 or an All-1:
if retransmitting or fragment.is_all_0() or fragment.is_all_1():
# Juan Carlos dijo que al enviar un ACKREQ el contador se reinicia.
attempts = 0
# Set the timeout for RETRANSMISSION_TIMER_VALUE.
the_socket.settimeout(profile_uplink.RETRANSMISSION_TIMER_VALUE)
while attempts < profile_uplink.MAX_ACK_REQUESTS:
# Try receiving an ACK from the receiver.
try:
ack, address = the_socket.recvfrom(profile_downlink.MTU)
def hello_get(request):
"""HTTP Cloud Function.
Args:
request (flask.Request): The request object.
<http://flask.pocoo.org/docs/1.0/api/#flask.Request>
Returns:
The response text, or any set of values that can be turned into a
Response object using `make_response`
<http://flask.pocoo.org/docs/1.0/api/#flask.Flask.make_response>.
"""
# Wait for an HTTP POST request.
if request.method == 'POST':
# Get request JSON.
print("POST RECEIVED")
request_dict = request.get_json()
print('Received Sigfox message: {}'.format(request_dict))
# Get data and Sigfox Sequence Number.
fragment = request_dict["data"]
sigfox_sequence_number = request_dict["seqNumber"]
# Initialize Cloud Storage variables.
BUCKET_NAME = config.BUCKET_NAME
# Parse fragment into "fragment = [header, payload]
header_bytes = None
header_first_hex = fragment[:1]
if (header_first_hex) == '0' or (header_first_hex) =='1':
header = bytes.fromhex(fragment[:2])
payload = bytearray.fromhex(fragment[2:])
header_bytes = 1
elif (header_first_hex) == '2':
header = bytearray.fromhex(fragment[:4])
payload = bytearray.fromhex(fragment[4:])
header_bytes = 2
else:
print("Wrong header in fragment")
return 'wrong header', 204
if bytearray.fromhex(fragment[2:]).decode() == "CLEAN":
try:
_ = requests.post(
url=config.CLEAN_URL,
json={"header_bytes": header_bytes,
"from_lopy": "True"},
timeout=0.1)
except requests.exceptions.ReadTimeout:
pass
return '', 204
elif bytearray.fromhex(fragment[2:]).decode() == "CLEAN_ALL":
try:
_ = requests.post(
url=config.CLEAN_URL,
json={"header_bytes": header_bytes,
"from_lopy": "True"},
timeout=0.1)
except requests.exceptions.ReadTimeout:
pass
return '', 204
data = [header, payload]
# Initialize SCHC variables.
profile_uplink = Sigfox("UPLINK", "ACK ON ERROR", header_bytes)
profile_downlink = Sigfox("DOWNLINK", "NO ACK", header_bytes)
buffer_size = profile_uplink.MTU
n = profile_uplink.N
m = profile_uplink.M
# If fragment size is greater than buffer size, ignore it and end function.
if len(fragment) / 2 * 8 > buffer_size: # Fragment is hex, 1 hex = 1/2 byte
return json.dumps({"message": "Fragment size is greater than buffer size D:"}), 200
# If the folder named "all windows" does not exist, create it along with all subdirectories.
if not exists_blob("all_windows/"):
print("INITIALIZING... (be patient)")
create_folder("all_windows/")
# For each window in the SCHC Profile, create its blob.
for i in range(2 ** m):
create_folder("all_windows/window_%d/" % i)
# For each fragment in the SCHC Profile, create its blob.
for j in range(2 ** n - 1):
upload_blob("", "all_windows/window_%d/fragment_%d_%d" % (i, i, j))
# Create the blob for each bitmap.
if not exists_blob("all_windows/window_%d/bitmap_%d" % (i, i) or size_blob("all_windows/window_%d/bitmap_%d" % (i, i)) == 0):
bitmap = ""
for b in range(profile_uplink.BITMAP_SIZE):
bitmap += "0"
upload_blob(bitmap, "all_windows/window_%d/bitmap_%d" % (i, i))
print("BLOBs created")
# Find current experiment number
current_experiment = 0
for blob in blob_list():
if blob.startswith("DL_LOSSES_"):
current_experiment += 1
print(f"This is the {current_experiment}th experiment.")
# Initialize empty window
window = []
for i in range(2 ** n - 1):
window.append([b"", b""])
# Compute the fragment compressed number (FCN) from the Profile
fcn_dict = {}
for j in range(2 ** n - 1):
fcn_dict[zfill(bin((2 ** n - 2) - (j % (2 ** n - 1)))[2:], n)] = j
# Convert to a Fragment class for easier manipulation.
fragment_message = Fragment(profile_uplink, data)
if 'enable_losses' in request_dict:
if request_dict['enable_losses'] == "True":
loss_rate = request_dict["loss_rate"]
# loss_rate = 10
coin = random.random()
print('loss rate: {}, random toss:{}'.format(loss_rate, coin * 100))
if coin * 100 < loss_rate:
print("[LOSS] The fragment was lost.")
if fragment_message.is_all_1():
last_sequence_number = read_blob("SSN")
print("SSN is {} and last SSN is {}".format(sigfox_sequence_number, last_sequence_number))
if int(sigfox_sequence_number) - int(last_sequence_number) == 1:
# We do that to save the last SSN value for future use (when the next All-1 Arrives)
# In a Real Loss Scenario we will not know the SSN...
upload_blob(sigfox_sequence_number, "SSN")
return 'fragment lost', 204
# Get current window for this fragment.
current_window = int(fragment_message.header.W, 2)
# Get the current bitmap.
bitmap = read_blob("all_windows/window_%d/bitmap_%d" % (current_window, current_window))
# Try getting the fragment number from the FCN dictionary.
try:
fragment_number = fcn_dict[fragment_message.header.FCN]
upload_blob(fragment_number, "fragment_number")
time_received = int(request_dict["time"])
if exists_blob("timestamp"):
# Check time validation.
last_time_received = int(read_blob("timestamp"))
# If this is not the very first fragment and the inactivity timer has been reached, ignore the message.
# TODO: Send SCHC abort message.
if str(fragment_number) != "0" and str(
current_window) != "0" and time_received - last_time_received > profile_uplink.INACTIVITY_TIMER_VALUE:
return json.dumps({"message": "Inactivity timer reached. Message ignored."}), 200
# Upload current timestamp.
upload_blob(time_received, "timestamp")
# Print some data for the user.
print("[RECV] This corresponds to the " + str(fragment_number) + "th fragment of the " + str(
current_window) + "th window.")
print("[RECV] Sigfox sequence number: " + str(sigfox_sequence_number))
#Controlled Errors check
# losses_mask = read_blob(BUCKET_NAME, "all_windows/window_%d/losses_mask_%d" % (current_window, current_window))
# if (losses_mask[fragment_number]) != '0':
# losses_mask = replace_bit(losses_mask, fragment_number, str(int(losses_mask[fragment_number])-1))
# upload_blob(BUCKET_NAME, losses_mask, "all_windows/window_%d/losses_mask_%d" % (current_window, current_window))
# print("[LOSS] The fragment was lost.")
# return 'fragment lost', 204
# Update bitmap and upload it.
bitmap = replace_bit(bitmap, fragment_number, '1')
upload_blob(bitmap, "all_windows/window_%d/bitmap_%d" % (current_window, current_window))
# Upload the fragment data.
upload_blob(data[0].decode("ISO-8859-1") + data[1].decode("utf-8"),
"all_windows/window_%d/fragment_%d_%d" % (current_window, current_window, fragment_number))
# If the FCN could not been found, it almost certainly is the final fragment.
except KeyError:
print("[RECV] This seems to be the final fragment.")
# Upload current timestamp.
time_received = int(request_dict["time"])
upload_blob(time_received, "timestamp")
print("is All-1:{}, is All-0:{}".format(fragment_message.is_all_1(), fragment_message.is_all_0()))
# print("RULE_ID: {}, W:{}, FCN:{}".format(fragment.header.RULE_ID, fragment.header.W, fragment.header.FCN))
# Update bitmap and upload it.
bitmap = replace_bit(bitmap, len(bitmap) - 1, '1')
upload_blob(bitmap, "all_windows/window_%d/bitmap_%d" % (current_window, current_window))
# Get some SCHC values from the fragment.
rule_id = fragment_message.header.RULE_ID
dtag = fragment_message.header.DTAG
w = fragment_message.header.W
# Get last and current Sigfox sequence number (SSN)
last_sequence_number = 0
if exists_blob("SSN"):
last_sequence_number = read_blob("SSN")
upload_blob(sigfox_sequence_number, "SSN")
# If the fragment is at the end of a window (ALL-0 or ALL-1)
if fragment_message.is_all_0() or fragment_message.is_all_1():
# Prepare the ACK bitmap. Find the first bitmap with a 0 in it.
for i in range(current_window + 1):
bitmap_ack = read_blob("all_windows/window_%d/bitmap_%d" % (i, i))
print(bitmap_ack)
window_ack = i
if '0' in bitmap_ack:
break
# If the ACK bitmap has a 0 at the end of a non-final window, a fragment has been lost.
if fragment_message.is_all_0() and '0' in bitmap_ack:
if 'enable_dl_losses' in request_dict:
if request_dict['enable_dl_losses'] == "True":
coin = random.random()
print('loss rate: {}, random toss:{}'.format(loss_rate, coin * 100))
if coin * 100 < loss_rate:
print("[LOSS-ALL0] The Downlink NACK was lost.")
upload_blob(read_blob(f"DL_LOSSES_{current_experiment}") + "\n Lost DL message in window {}".format(current_window), f"DL_LOSSES_{current_experiment}")
return 'Downlink lost', 204
print("[ALL0] Sending ACK for lost fragments...")
print("bitmap with errors -> {}".format(bitmap_ack))
# Create an ACK message and send it.
ack = ACK(profile_downlink, rule_id, dtag, zfill(format(window_ack, 'b'), m), bitmap_ack, '0')
response_json = send_ack(request_dict, ack)
print("Response content -> {}".format(response_json))
return response_json, 200
# If the ACK bitmap is complete and the fragment is an ALL-0, send an ACK
# This is to be modified, as ACK-on-Error does not need an ACK for every window.
if fragment_message.is_all_0() and bitmap[0] == '1' and all(bitmap):
print("[ALL0] All Fragments of current window received")
print("[ALL0] No need to send an ACK")
# print("[ALLX] Sending ACK after window...")
# Create an ACK message and send it.
# ack = ACK(profile_downlink, rule_id, dtag, w, bitmap, '0')
# response_json = send_ack(request_dict, ack)
# print("200, Response content -> {}".format(response_json))
# Response to continue, no ACK is sent Back.
return '', 204
# return response_json, 200
# If the fragment is an ALL-1
if fragment_message.is_all_1():
# response = {request_dict['device']: {'downlinkData': '080fffffffffffff'}}
# print("response -> {}".format(json.dumps(response)))
# return json.dumps(response), 200
# The bitmap in the last window follows the following regular expression: "1*0*1*"
# Since the ALL-1, if received, changes the least significant bit of the bitmap.
# For a "complete" bitmap in the last window, there shouldn't be non-consecutive zeroes:
# 1110001 is a valid bitmap, 1101001 is not.
pattern2 = re.compile("0*1")
if pattern2.fullmatch(bitmap_ack):
if 'enable_dl_losses' in request_dict:
if request_dict['enable_dl_losses'] == "True":
coin = random.random()
print('loss rate: {}, random toss:{}'.format(loss_rate, coin * 100))
if coin * 100 < loss_rate:
print("[LOSS-ALL1] The Downlink ACK was lost.")
upload_blob(read_blob(f"DL_LOSSES_{current_experiment}") + "\n Lost DL message in window {}".format(current_window), f"DL_LOSSES_{current_experiment}")
return 'Downlink lost', 204
print("SSN is {} and last SSN is {}".format(sigfox_sequence_number, last_sequence_number))
# Downlink Controlled Errors
dl_errors = int(read_blob("dl_errors"))
if dl_errors == 0:
last_index = 0
upload_blob(data[0].decode("ISO-8859-1") + data[1].decode("utf-8"),
"all_windows/window_%d/fragment_%d_%d" % (
current_window, current_window, last_index))
print("Info for reassemble: last_index:{}, current_window:{}".format(last_index, current_window))
try:
print('Activating reassembly process...')
_ = requests.post(
url=config.REASSEMBLE_URL,
json={"last_index": last_index, "current_window": current_window,
"header_bytes": header_bytes},
timeout=0.1)
except requests.exceptions.ReadTimeout:
pass
# Send last ACK to end communication.
print("[ALL1] Reassembled: Sending last ACK")
bitmap = ''
for k in range(profile_uplink.BITMAP_SIZE):
bitmap += '0'
last_ack = ACK(profile_downlink, rule_id, dtag, w, bitmap, '1')
response_json = send_ack(request_dict, last_ack)
# return response_json, 200
# response_json = send_ack(request_dict, last_ack)
print("200, Response content -> {}".format(response_json))
return response_json, 200
else:
dl_errors -= 1
upload_blob(dl_errors, "dl_errors")
print("[DL-ERROR] We simulate a downlink error. We don't send an ACK")
return '', 204
pattern = re.compile("1*0*1")
# If the bitmap matches the regex, check if the last two received fragments are consecutive.
if pattern.fullmatch(bitmap_ack):
print("SSN is {} and last SSN is {}".format(sigfox_sequence_number,last_sequence_number))
# If the last two received fragments are consecutive, accept the ALL-1 and start reassembling
if 'enable_dl_losses' in request_dict:
if request_dict['enable_dl_losses'] == "True":
coin = random.random()
print('loss rate: {}, random toss:{}'.format(loss_rate, coin * 100))
if coin * 100 < loss_rate:
print("[LOSS-ALL1] The Downlink ACK was lost.")
upload_blob(read_blob(f"DL_LOSSES_{current_experiment}") + "\n Lost DL message in window {}".format(current_window), f"DL_LOSSES_{current_experiment}")
return 'Downlink lost', 204
if int(sigfox_sequence_number) - int(last_sequence_number) == 1:
# Downlink Controlled Errors
dl_errors = int(read_blob("dl_errors"))
if dl_errors == 0:
last_index = int(read_blob("fragment_number")) + 1
upload_blob(data[0].decode("ISO-8859-1") + data[1].decode("utf-8"),
"all_windows/window_%d/fragment_%d_%d" % (
current_window, current_window, last_index))
print("Info for reassemble: last_index:{}, current_window:{}".format(last_index,current_window))
try:
print('Activating reassembly process...')
_ = requests.post(url=config.REASSEMBLE_URL,
json={"last_index": last_index, "current_window": current_window, "header_bytes": header_bytes},
timeout=0.1)
except requests.exceptions.ReadTimeout:
pass
# Send last ACK to end communication.
print("[ALL1] Reassembled: Sending last ACK")
bitmap = ''
for k in range(profile_uplink.BITMAP_SIZE):
bitmap += '0'
last_ack = ACK(profile_downlink, rule_id, dtag, w, bitmap, '1')
response_json = send_ack(request_dict, last_ack)
# return response_json, 200
# response_json = send_ack(request_dict, last_ack)
print("200, Response content -> {}".format(response_json))
return response_json, 200
else:
dl_errors -= 1
upload_blob(dl_errors, "dl_errors")
print("[DL-ERROR] We simulate a downlink error. We don't send an ACK")
return '', 204
else:
# Send NACK at the end of the window.
if 'enable_dl_losses' in request_dict:
if request_dict['enable_dl_losses'] == "True":
coin = random.random()
print('loss rate: {}, random toss:{}'.format(loss_rate, coin * 100))
if coin * 100 < loss_rate:
print("[LOSS-ALL1] The Downlink NACK was lost.")
upload_blob(read_blob(f"DL_LOSSES_{current_experiment}") + "\n Lost DL message in window {}".format(current_window), f"DL_LOSSES_{current_experiment}")
return 'Downlink lost', 204
print("[ALLX] Sending NACK for lost fragments because of SSN...")
ack = ACK(profile_downlink, rule_id, dtag, zfill(format(window_ack, 'b'), m), bitmap_ack, '0')
response_json = send_ack(request_dict, ack)
return response_json, 200
# If they are not, there is a gap between two fragments: a fragment has been lost.
# The same happens if the bitmap doesn't match the regex.
else:
# Send NACK at the end of the window.
if 'enable_dl_losses' in request_dict:
if request_dict['enable_dl_losses'] == "True":
coin = random.random()
print('loss rate: {}, random toss:{}'.format(loss_rate, coin * 100))
if coin * 100 < loss_rate:
print("[LOSS-ALL1] The Downlink NACK was lost.")
upload_blob(read_blob(f"DL_LOSSES_{current_experiment}") + "\n Lost DL message in window {}".format(current_window), f"DL_LOSSES_{current_experiment}")
return 'Downlink lost', 204
print("[ALLX] Sending NACK for lost fragments...")
ack = ACK(profile_downlink, rule_id, dtag, zfill(format(window_ack, 'b'), m), bitmap_ack, '0')
response_json = send_ack(request_dict, ack)
return response_json, 200
return '', 204
else:
print('Invalid HTTP Method to invoke Cloud Function. Only POST supported')
return abort(405)
fcn_dict[zfill(bin((2 ** n - 2) - (j % (2 ** n - 1)))[2:], 3)] = j
# Start receiving fragments.
while True:
# Receive fragment
try:
print(bitmap)
fragment, address = the_socket.recvfrom(buffer_size)
# A fragment has the format "fragment = [header, payload]".
data = [bytes([fragment[0]]), bytearray(fragment[1:])]
# Convert to a Fragment class for easier manipulation.
fragment_message = Fragment(profile_uplink, data)
# This avoids All-0 and All-1 fragments being lost for testing purposes.
# TODO: What happens when All-0 or All-1 get lost?
if not fragment_message.is_all_0() and not fragment_message.is_all_1():
# Lose packet with certain probability and go to the start of the loop.
coin = random.random()
if coin * 100 < loss_rate:
print("[LOSS] The packet was lost.")
continue
# Try finding the fragment number from the FCN of the fragment.
try:
fragment_number = fcn_dict[fragment_message.header.FCN]
current_window = int(fragment_message.header.W, 2)
def schc_post():
"""HTTP Cloud Function.
Args:
request (flask.Request): The request object.
<http://flask.pocoo.org/docs/1.0/api/#flask.Request>
Returns:
The response text, or any set of values that can be turned into a
Response object using `make_response`
<http://flask.pocoo.org/docs/1.0/api/#flask.Flask.make_response>.
"""
REASSEMBLER_URL = "http://localhost:5000/reassembler"
CLEANUP_URL = "http://localhost:5000/cleanup"
# File where we will store authentication credentials after acquiring them.
os.environ['GOOGLE_APPLICATION_CREDENTIALS'] = config.CLIENT_SECRETS_FILE
# Wait for an HTTP POST request.
if request.method == 'POST':
# Get request JSON.
print("POST RECEIVED")
request_dict = request.get_json()
print('Received Sigfox message: {}'.format(request_dict))
# Get data and Sigfox Sequence Number.
raw_data = request_dict["data"]
sigfox_sequence_number = request_dict["seqNumber"]
ack_req = request_dict["ack"]
# Initialize Cloud Storage variables.
BUCKET_NAME = config.BUCKET_NAME
header_first_hex = raw_data[:1]
if header_first_hex == '0' or header_first_hex == '1':
header = bytes.fromhex(raw_data[:2])
payload = bytearray.fromhex(raw_data[2:])
header_bytes = 1
elif header_first_hex == '2':
header = bytearray.fromhex(raw_data[:4])
payload = bytearray.fromhex(raw_data[4:])
header_bytes = 2
else:
print("Wrong header in raw_data")
return 'wrong header', 204
# Initialize SCHC variables.
profile = Sigfox("UPLINK", "ACK ON ERROR", header_bytes)
n = profile.N
m = profile.M
# If fragment size is greater than buffer size, ignore it and end function.
if len(
raw_data
) / 2 * 8 > profile.UPLINK_MTU: # Fragment is hex, 1 hex = 1/2 byte
return json.dumps(
{"message": "Fragment size is greater than buffer size"}), 200
# If the folder named "all windows" does not exist, create it along with all subdirectories.
initialize_blobs(BUCKET_NAME, profile)
# Compute the fragment compressed number (FCN) from the Profile
fcn_dict = {}
for j in range(2**n - 1):
fcn_dict[zfill(bin((2**n - 2) - (j % (2**n - 1)))[2:], 3)] = j
# Parse raw_data into "data = [header, payload]
# Convert to a Fragment class for easier manipulation.
header = bytes.fromhex(raw_data[:2])
payload = bytearray.fromhex(raw_data[2:])
data = [header, payload]
fragment_message = Fragment(profile, data)
if fragment_message.is_sender_abort():
print("Sender-Abort received")
try:
print("Cleaning")
_ = requests.post(url=CLEANUP_URL,
json={"header_bytes": header_bytes},
timeout=0.1)
except requests.exceptions.ReadTimeout:
pass
return 'Sender-Abort received', 204
# Get data from this fragment.
fcn = fragment_message.header.FCN
rule_id = fragment_message.header.RULE_ID
dtag = fragment_message.header.DTAG
current_window = int(fragment_message.header.W, 2)
# Get the current bitmap.
bitmap = read_blob(
BUCKET_NAME,
f"all_windows/window_{current_window}/bitmap_{current_window}")
# Controlling deterministic losses. This loads the file "loss_mask.txt" which states when should a fragment be
# lost, separated by windows.
fd = None
try:
fd = open(config.LOSS_MASK_MODIFIED, "r")
except FileNotFoundError:
fd = open(config.LOSS_MASK, "r")
finally:
loss_mask = []
for line in fd:
if not line.startswith("#"):
for char in line:
try:
loss_mask.append(int(char))
except ValueError:
pass
fd.close()
print(f"Loss mask: {loss_mask}")
# Controlling random losses.
if 'enable_losses' in request_dict and not (
fragment_message.is_all_0() or fragment_message.is_all_1()):
if request_dict['enable_losses']:
loss_rate = request_dict["loss_rate"]
# loss_rate = 10
coin = random.random()
print(f'loss rate: {loss_rate}, random toss:{coin * 100}')
if coin * 100 < loss_rate:
print("[LOSS] The fragment was lost.")
return 'fragment lost', 204
# Check if the fragment is an All-1
if is_monochar(fcn) and fcn[0] == '1':
print("[RECV] This is an All-1.")
# Check if fragment is to be lost (All-1 is the very last fragment)
if loss_mask[-1] != 0:
loss_mask[-1] -= 1
with open("loss_mask_modified.txt", "w") as fd:
for i in loss_mask:
fd.write(str(i))
print(f"[RECV] Fragment lost.")
return 'fragment lost', 204
# Inactivity timer validation
time_received = int(request_dict["time"])
if exists_blob(BUCKET_NAME, "timestamp"):
# Check time validation.
last_time_received = int(read_blob(BUCKET_NAME, "timestamp"))
print(f"[RECV] Previous timestamp: {last_time_received}")
print(f"[RECV] This timestamp: {time_received}")
# If the inactivity timer has been reached, abort communication.
if time_received - last_time_received > profile.INACTIVITY_TIMER_VALUE:
print("[RECV] Inactivity timer reached. Ending session.")
receiver_abort = ReceiverAbort(profile,
fragment_message.header)
print("Sending Receiver Abort")
response_json = send_ack(request_dict, receiver_abort)
print(f"Response content -> {response_json}")
try:
print("Cleaning Inactivity timer reached")
_ = requests.post(url=CLEANUP_URL,
json={"header_bytes": header_bytes},
timeout=0.1)
except requests.exceptions.ReadTimeout:
pass
return response_json, 200
# Update timestamp
upload_blob(BUCKET_NAME, time_received, "timestamp")
# Update bitmap and upload it.
bitmap = replace_bit(bitmap, len(bitmap) - 1, '1')
print(f"Bitmap is now {bitmap}")
upload_blob(
BUCKET_NAME, bitmap,
f"all_windows/window_{current_window}/bitmap_{current_window}")
# Upload the fragment data.
upload_blob(
BUCKET_NAME, data[0].decode("utf-8") + data[1].decode("utf-8"),
f"all_windows/window_{current_window}/fragment_{current_window}_{profile.WINDOW_SIZE - 1}"
)
# Else, it is a normal fragment.
else:
fragment_number = fcn_dict[fragment_message.header.FCN]
# Check if fragment is to be lost
position = current_window * profile.WINDOW_SIZE + fragment_number
if loss_mask[position] != 0:
loss_mask[position] -= 1
with open(config.LOSS_MASK_MODIFIED, "w") as fd:
for i in loss_mask:
fd.write(str(i))
print(f"[RECV] Fragment lost.")
return 'fragment lost', 204
# Inactivity timer validation
time_received = int(request_dict["time"])
if exists_blob(BUCKET_NAME, "timestamp"):
# Check time validation.
last_time_received = int(read_blob(BUCKET_NAME, "timestamp"))
print(f"[RECV] Previous timestamp: {last_time_received}")
print(f"[RECV] This timestamp: {time_received}")
# If the inactivity timer has been reached, abort communication.
if time_received - last_time_received > profile.INACTIVITY_TIMER_VALUE:
print("[RECV] Inactivity timer reached. Ending session.")
receiver_abort = ReceiverAbort(profile,
fragment_message.header)
print("Sending Receiver Abort")
response_json = send_ack(request_dict, receiver_abort)
print(f"Response content -> {response_json}")
try:
_ = requests.post(url=CLEANUP_URL,
json={"header_bytes": header_bytes},
timeout=0.1)
except requests.exceptions.ReadTimeout:
pass
return response_json, 200
# Update timestamp
upload_blob(BUCKET_NAME, time_received, "timestamp")
# Update Sigfox sequence number JSON
sequence_numbers = json.loads(read_blob(BUCKET_NAME, "SSN"))
sequence_numbers[position] = request_dict["seqNumber"]
print(sequence_numbers)
upload_blob(BUCKET_NAME, json.dumps(sequence_numbers), "SSN")
upload_blob(BUCKET_NAME, fragment_number, "fragment_number")
# Print some data for the user.
print(
f"[RECV] This corresponds to the {str(fragment_number)}th fragment "
f"of the {str(current_window)}th window.")
print(
f"[RECV] Sigfox sequence number: {str(sigfox_sequence_number)}"
)
# Update bitmap and upload it.
bitmap = replace_bit(bitmap, fragment_number, '1')
print(f"Bitmap is now {bitmap}")
upload_blob(
BUCKET_NAME, bitmap,
f"all_windows/window_{current_window}/bitmap_{current_window}")
# Upload the fragment data.
upload_blob(
BUCKET_NAME, data[0].decode("utf-8") + data[1].decode("utf-8"),
f"all_windows/window_{current_window}/fragment_{current_window}_{fragment_number}"
)
# If the fragment requests an ACK...
if ack_req:
# Prepare the ACK bitmap. Find the first bitmap with a 0 in it.
# This bitmap corresponds to the lowest-numered window with losses.
bitmap_ack = None
window_ack = None
for i in range(current_window + 1):
bitmap_ack = read_blob(BUCKET_NAME,
f"all_windows/window_{i}/bitmap_{i}")
print(bitmap_ack)
window_ack = i
if '0' in bitmap_ack:
break
# The final window is only accessible through All-1.
# If All-0, check non-final windows
if fragment_message.is_all_0():
# If the ACK bitmap has a 0 at a non-final window, a fragment has been lost.
if '0' in bitmap_ack:
print(
"[ALL0] Lost fragments have been detected. Preparing ACK."
)
print(f"[ALL0] Bitmap with errors -> {bitmap_ack}")
ack = ACK(profile=profile,
rule_id=rule_id,
dtag=dtag,
w=zfill(format(window_ack, 'b'), m),
c='0',
bitmap=bitmap_ack)
response_json = send_ack(request_dict, ack)
print(f"Response content -> {response_json}")
print("[ALL0] ACK sent.")
return response_json, 200
# If all bitmaps are complete up to this point, no losses are detected.
else:
print("[ALL0] No losses have been detected.")
print("Response content -> ''")
return '', 204
# If the fragment is All-1, the last window should be considered.
if fragment_message.is_all_1():
# First check for 0s in the bitmap. If the bitmap is of a non-final window, send corresponding ACK.
if current_window != window_ack and '0' in bitmap_ack:
print(
"[ALL1] Lost fragments have been detected. Preparing ACK."
)
print(f"[ALL1] Bitmap with errors -> {bitmap_ack}")
ack = ACK(profile=profile,
rule_id=rule_id,
dtag=dtag,
w=zfill(format(window_ack, 'b'), m),
c='0',
bitmap=bitmap_ack)
response_json = send_ack(request_dict, ack)
print(f"Response content -> {response_json}")
print("[ALL1] ACK sent.")
return response_json, 200
# If the bitmap is of the final window, check the following regex.
else:
# The bitmap in the last window follows the following regular expression: "1*0*1*"
# Since the ALL-1, if received, changes the least significant bit of the bitmap.
# For a "complete" bitmap in the last window, there shouldn't be non-consecutive zeroes:
# 1110001 is a valid bitmap, 1101001 is not.
# The bitmap may or may not contain the 0s.
pattern = re.compile("1*0*1")
# If the bitmap matches the regex, check if there are still lost fragments.
if pattern.fullmatch(bitmap_ack) is not None:
# The idea is the following:
# Assume a fragment has been lost, but the regex has been matched.
# For example, we want a bitmap 1111111 but due to a loss we have 1111101.
# This incomplete bitmap matches the regex.
# We should note that here the SSN of the All-1 and the penultimate fragment received
# are not consecutive.
# Retransmitting the lost fragment and resending the All-1 solves that problem.
# There is another problematic case: we want a bitmap 1111111 but due to losses we have 1111001.
# If the second of those two lost fragments is retransmitted, the new bitmap, 1111011, does not
# match the regex. If, instead, the first of those fragments is retransmitted, the new bitmap
# 1111101 does match the regex. As the sender should retransmit these messages sequentially,
# the SSN of the resent All-1 and the penultimate fragment are still not consecutive.
# The only way for these two SSNs to be consecutive in these cases
# is that the penultimate fragment fills the bitmap in the 6th bit,
# and the last fragment is the All-1.
# This reasoning is still valid when the last window does not contain WINDOW_SIZE fragments.
# These particular cases validate the use for this regex matching.
# Remember that 1111011 is NOT a valid bitmap.
# In conclusion, AFTER the regex matching,
# we should check if the SSNs of the two last received fragments are consecutive.
# The second to last fragment has the highest SSN registered in the JSON.
# TODO: What happens when the All-0 prior to the last window is lost and is retransmitted with the All-1?
# We should consider only the SSNs of the last window. If there is a retransmission in a window
# prior to the last, the reasoning fails since the All-1 is always consecutive to a
# retransmitted fragment of a non-final window.
# If the All-1 is the only fragment of the last window (bitmap 0000001), and bitmap check of
# prior windows has passed, check the consecutiveness of the last All-0 and the All-1.
sequence_numbers = json.loads(
read_blob(BUCKET_NAME, "SSN"))
# This array has the SSNs of the last window.
# last_window_ssn = list(sequence_numbers.values())[current_window * profile.WINDOW_SIZE + 1:]
# If this array is empty, no messages have been received in the last window. Check if the
# last All-0 and the All-1 are consecutive. If they are not, there are lost fragments. If they
# are, the All-0 may have been retransmitted.
# print(last_window_ssn)
# The last sequence number should be the highest of these values.
last_sequence_number = max(
list(map(int, list(sequence_numbers.values()))))
# TODO: If the All-0 has the highest of these values, it may have been retransmitted using the All-1
print(
f"All-1 sequence number {sigfox_sequence_number}")
print(f"Last sequence number {last_sequence_number}")
if int(sigfox_sequence_number) - int(
last_sequence_number) == 1:
print(
"[ALL1] Integrity checking complete, launching reassembler."
)
# All-1 does not define a fragment number, so its fragment number must be the next
# of the higest registered fragment number.
last_index = max(
list(map(int, list(
sequence_numbers.keys())))) + 1
upload_blob_using_threads(
BUCKET_NAME, data[0].decode("ISO-8859-1") +
data[1].decode("utf-8"),
f"all_windows/window_{current_window}/"
f"fragment_{current_window}_{last_index}")
try:
_ = requests.post(url=REASSEMBLER_URL,
json={
"last_index": last_index,
"current_window":
current_window,
"header_bytes":
header_bytes
},
timeout=0.1)
except requests.exceptions.ReadTimeout:
pass
# Send last ACK to end communication (on receiving an All-1, if no fragments are lost,
# if it has received at least one tile, return an ACK for the highest numbered window we
# currently have tiles for).
print("[ALL1] Preparing last ACK")
bitmap = ''
for k in range(profile.BITMAP_SIZE):
bitmap += '0'
last_ack = ACK(profile=profile,
rule_id=rule_id,
dtag=dtag,
w=zfill(format(window_ack, 'b'), m),
c='1',
bitmap=bitmap_ack)
response_json = send_ack(request_dict, last_ack)
print(f"200, Response content -> {response_json}")
print("[ALL1] Last ACK has been sent.")
return response_json, 200
# If the last two fragments are not consecutive, or the bitmap didn't match the regex,
# send an ACK reporting losses.
else:
# Send NACK at the end of the window.
print("[ALLX] Sending NACK for lost fragments...")
ack = ACK(profile=profile,
rule_id=rule_id,
dtag=dtag,
w=zfill(format(window_ack, 'b'), m),
c='0',
bitmap=bitmap_ack)
response_json = send_ack(request_dict, ack)
return response_json, 200
return '', 204
else:
print(
'Invalid HTTP Method to invoke Cloud Function. Only POST supported'
)
return abort(405)
# Get fragments from backend
backend_fragments = get_fragments(device_id, limit, username, password)
print("Fetched fragments:")
print(backend_fragments)
for i in range(len(backend_fragments)):
# Initialize window
for j in range(2 ** n - 1):
window.append(b"")
fragment = backend_fragments[i]
data = [bytes([fragment[0]]), bytearray(fragment[1:])]
fragment_message = Fragment(profile_uplink, data)
try:
fragment_number = fcn_dict[fragment_message.header.FCN]
print("[RECV] This corresponds to the " + str(fragment_number) + "th fragment of the " + str(
current_window) + "th window.")
# Set the fragment_number-th bit of the bitmap to 1 and add the fragment to the fragment_number-th position
# in the current window.
bitmap = replace_bit(bitmap, fragment_number, '1')
window[fragment_number] = data
# If the FCN does not have a corresponding fragment number, then it almost certainly is an All-1
except KeyError:
# Set the rightmost bit of the bitmap to 1 (See SCHC draft).
def __init__(self, profile, schc_fragments):
self.PROFILE = profile
self.SCHC_FRAGMENTS = [
Fragment(self.PROFILE, fragment) for fragment in schc_fragments
]
def receiver():
"""HTTP Cloud Function.
Args:
request (flask.Request): The request object.
<http://flask.pocoo.org/docs/1.0/api/#flask.Request>
Returns:
The response text, or any set of values that can be turned into a
Response object using `make_response`
<http://flask.pocoo.org/docs/1.0/api/#flask.Flask.make_response>.
"""
# File where we will store authentication credentials after acquiring them.
os.environ['GOOGLE_APPLICATION_CREDENTIALS'] = config.CLIENT_SECRETS_FILE
# Wait for an HTTP POST request.
if request.method == 'POST':
# Get request JSON.
print("POST RECEIVED")
request_dict = request.get_json()
print('Received Sigfox message: {}'.format(request_dict))
# Get data and Sigfox Sequence Number.
fragment = request_dict["data"]
sigfox_sequence_number = request_dict["seqNumber"]
header_first_hex = fragment[0]
if header_first_hex == '0' or header_first_hex == '1':
header = bytes.fromhex(fragment[:2])
payload = bytearray.fromhex(fragment[2:])
header_bytes = 1
elif header_first_hex == 'f' or header_first_hex == '2':
header = bytearray.fromhex(fragment[:4])
payload = bytearray.fromhex(fragment[4:])
header_bytes = 2
else:
print("Wrong header in fragment")
return 'wrong header', 204
data = [header, payload]
# Initialize SCHC variables.
profile = SigfoxProfile("UPLINK", "ACK ON ERROR", header_bytes)
buffer_size = profile.UPLINK_MTU
n = profile.N
m = profile.M
# If fragment size is greater than buffer size, ignore it and end function.
if len(fragment
) / 2 * 8 > buffer_size: # Fragment is hex, 1 hex = 1/2 byte
return json.dumps(
{"message":
"Fragment size is greater than buffer size D:"}), 200
# Initialize empty window
window = []
for i in range(2**n - 1):
window.append([b"", b""])
# Compute the fragment compressed number (FCN) from the Profile
fcn_dict = {}
for j in range(2**n - 1):
fcn_dict[zfill(bin((2**n - 2) - (j % (2**n - 1)))[2:], n)] = j
# Convert to a Fragment class for easier manipulation.
fragment_message = Fragment(profile, data)
# Get current window for this fragment.
current_window = int(fragment_message.HEADER.W, 2)
# Get the current bitmap.
bitmap = read_blob("all_windows/window_%d/bitmap_%d" %
(current_window, current_window))
if fragment_message.is_sender_abort():
print("Sender-Abort received")
return 'Sender-Abort received', 204
try:
fragment_number = fcn_dict[fragment_message.HEADER.FCN]
upload_blob(fragment_number, "fragment_number")
time_received = int(request_dict["time"])
if exists_blob("timestamp"):
# Check time validation.
last_time_received = int(read_blob("timestamp"))
# If this is not the very first fragment and the inactivity timer has been reached, ignore the message.
if str(fragment_number) != "0" and str(
current_window
) != "0" and time_received - last_time_received > profile.INACTIVITY_TIMER_VALUE:
print("[RECV] Inactivity timer reached. Ending session.")
receiver_abort = ReceiverAbort(profile,
fragment_message.HEADER)
print("Sending Receiver Abort")
response_json = send_ack(request_dict, receiver_abort)
print(f"Response content -> {response_json}")
return response_json, 200
# Upload current timestamp.
upload_blob(time_received, "timestamp")
# Print some data for the user.
print(
f"[RECV] This corresponds to the {ordinal(fragment_number)} fragment "
f"of the {ordinal(current_window)} window.")
print(f"[RECV] Sigfox sequence number: {sigfox_sequence_number}")
# Update bitmap and upload it.
bitmap = replace_bit(bitmap, fragment_number, '1')
# If the FCN could not been found, it almost certainly is the final fragment.
except KeyError:
print("[RECV] This seems to be the final fragment.")
fragment_number = profile.WINDOW_SIZE - 1
# Upload current timestamp.
time_received = int(request_dict["time"])
upload_blob(time_received, "timestamp")
print(
f"is All-1:{fragment_message.is_all_1()}, is All-0:{fragment_message.is_all_0()}"
)
# Update bitmap and upload it.
bitmap = replace_bit(bitmap, len(bitmap) - 1, '1')
# Upload the fragment data.
upload_blob(
bitmap,
f"all_windows/window_{current_window}/bitmap_{current_window}")
upload_blob(
data[0].decode("ISO-8859-1") + data[1].decode("utf-8"),
f"all_windows/window_{current_window}/fragment_{current_window}_{fragment_number}"
)
# Get some SCHC values from the fragment.
rule_id = fragment_message.HEADER.RULE_ID
dtag = fragment_message.HEADER.DTAG
# Get last and current Sigfox sequence number (SSN)
last_sequence_number = 0
if exists_blob("SSN"):
last_sequence_number = read_blob("SSN")
upload_blob(sigfox_sequence_number, "SSN")
# # Controlling deterministic losses. This loads the file "loss_mask.txt" which states when should a fragment be
# # lost, separated by windows.
# fd = None
# try:
# fd = open(config.LOSS_MASK_MODIFIED, "r")
# except FileNotFoundError:
# fd = open(config.LOSS_MASK, "r")
# finally:
# loss_mask = []
# for line in fd:
# if not line.startswith("#"):
# for char in line:
# try:
# loss_mask.append(int(char))
# except ValueError:
# pass
# fd.close()
#
# print(f"Loss mask: {loss_mask}")
# If the fragment is at the end of a window (ALL-0 or ALL-1)
if fragment_message.is_all_0() or fragment_message.is_all_1():
# Prepare the ACK bitmap. Find the first bitmap with a 0 in it.
for i in range(current_window + 1):
bitmap_ack = read_blob("all_windows/window_%d/bitmap_%d" %
(i, i))
print(bitmap_ack)
window_ack = i
if '0' in bitmap_ack:
break
# If the ACK bitmap has a 0 at the end of a non-final window, a fragment has been lost.
if fragment_message.is_all_0() and '0' in bitmap_ack:
print("[ALL0] Sending ACK for lost fragments...")
print("bitmap with errors -> {}".format(bitmap_ack))
# Create an ACK message and send it.
ack = ACK(profile=profile,
rule_id=rule_id,
dtag=dtag,
w=zfill(format(window_ack, 'b'), m),
c='0',
bitmap=bitmap_ack)
response_json = send_ack(request_dict, ack)
print("Response content -> {}".format(response_json))
return response_json, 200
# If the ACK bitmap is complete and the fragment is an ALL-0, don't send an ACK
if fragment_message.is_all_0() and bitmap[0] == '1' and all(
bitmap):
print("[ALL0] All Fragments of current window received")
print("[ALL0] No need to send an ACK")
return '', 204
# If the fragment is an ALL-1
if fragment_message.is_all_1():
# The bitmap in the last window follows the following regular expression: "1*0*1*"
# Since the ALL-1, if received, changes the least significant bit of the bitmap.
# For a "complete" bitmap in the last window, there shouldn't be non-consecutive zeroes:
# 1110001 is a valid bitmap, 1101001 is not.
pattern = re.compile("1*0*1")
# If the bitmap matches the regex, check if the last two received fragments are consecutive.
if pattern.fullmatch(bitmap_ack):
print("SSN is {} and last SSN is {}".format(
sigfox_sequence_number, last_sequence_number))
# If the last two received fragments are consecutive, accept the ALL-1 and start reassembling
if int(sigfox_sequence_number) - int(
last_sequence_number) == 1:
last_index = profile.WINDOW_SIZE - 1
print(
"Info for reassemble: last_index:{}, current_window:{}"
.format(last_index, current_window))
print('Activating reassembly process...')
start_request(url=config.LOCAL_REASSEMBLE_URL,
body={
"current_window": current_window,
"header_bytes": header_bytes
})
# Send last ACK to end communication.
print("[ALL1] Reassembled: Sending last ACK")
bitmap = ''
for k in range(profile.BITMAP_SIZE):
bitmap += '0'
last_ack = ACK(profile=profile,
rule_id=rule_id,
dtag=dtag,
w=zfill(format(window_ack, 'b'), m),
c='1',
bitmap=bitmap)
response_json = send_ack(request_dict, last_ack)
# return response_json, 200
# response_json = send_ack(request_dict, last_ack)
print("200, Response content -> {}".format(
response_json))
return response_json, 200
else:
# Send NACK at the end of the window.
print(
"[ALLX] Sending NACK for lost fragments because of SSN..."
)
ack = ACK(profile=profile,
rule_id=rule_id,
dtag=dtag,
w=zfill(format(window_ack, 'b'), m),
c='0',
bitmap=bitmap_ack)
response_json = send_ack(request_dict, ack)
return response_json, 200
# If they are not, there is a gap between two fragments: a fragment has been lost.
# The same happens if the bitmap doesn't match the regex.
else:
# Send NACK at the end of the window.
print("[ALLX] Sending NACK for lost fragments...")
ack = ACK(profile=profile,
rule_id=rule_id,
dtag=dtag,
w=zfill(format(window_ack, 'b'), m),
c='0',
bitmap=bitmap_ack)
response_json = send_ack(request_dict, ack)
return response_json, 200
return '', 204
else:
print(
'Invalid HTTP Method to invoke Cloud Function. Only POST supported'
)
return abort(405)
def post_message():
global counter_w0
global counter_w1
if request.method == 'POST':
print("POST RECEIVED")
# BUCKET_NAME = config.BUCKET_NAME
request_dict = request.get_json()
print('Received Sigfox message: {}'.format(request_dict))
# Get data and Sigfox Sequence Number.
fragment = request_dict["data"]
sigfox_sequence_number = request_dict["seqNumber"]
device = request_dict['device']
print('Data received from device id:{}, data:{}'.format(
device, request_dict['data']))
# Parse fragment into "fragment = [header, payload]
header = bytes.fromhex(fragment[:2])
payload = bytearray.fromhex(fragment[2:])
data = [header, payload]
# Initialize SCHC variables.
profile_uplink = Sigfox("UPLINK", "ACK ON ERROR")
profile_downlink = Sigfox("DOWNLINK", "NO ACK")
buffer_size = profile_uplink.MTU
n = profile_uplink.N
m = profile_uplink.M
# Convert to a Fragment class for easier manipulation.
fragment_message = Fragment(profile_uplink, data)
# Get some SCHC values from the fragment.
rule_id = fragment_message.header.RULE_ID
dtag = fragment_message.header.DTAG
w = fragment_message.header.W
print('RULE_ID: {} W: {}, FCN: {}'.format(
fragment_message.header.RULE_ID, fragment_message.header.W,
fragment_message.header.FCN))
if 'ack' in request_dict:
if request_dict['ack'] == 'true':
print('w:{}'.format(w))
if w == '00':
# print('ACK already send for this window, move along')
# counter_w0 = 0
# return '', 204
if counter_w0 == 1:
# print('ACK already send for this window, move along')
print("This time send an ACK for window 1")
counter_w0 = 0
bitmap = '0000001'
ack = ACK(profile_downlink, rule_id, dtag, "01",
bitmap, '0')
response_json = send_ack(request_dict, ack)
print("200, Response content -> {}".format(
response_json))
return 'fragment lost', 204
counter_w0 += 1
print('lets say we lost the All-0, so move along')
return 'fragment lost', 204
# return str(counter)
# Create an ACK message and send it.
bitmap = '1011111'
bitmap = '1000000'
bitmap = '0100001'
ack = ACK(profile_downlink, rule_id, dtag, w, bitmap, '1')
response_json = send_ack(request_dict, ack)
print("200, Response content -> {}".format(response_json))
# response = {request_dict['device']: {'downlinkData': '07f7ffffffffffff'}}
# print("response -> {}".format(response))
return response_json, 200
elif w == '01':
if counter_w1 == 1:
print("This time send an ACK for window 1")
# counter_w0 = 0
counter_w1 += 1
bitmap = '0000001'
ack = ACK(profile_downlink, rule_id, dtag, "01",
bitmap, '0')
response_json = send_ack(request_dict, ack)
print("200, Response content -> {}".format(
response_json))
return '', 204
elif counter_w1 == 2:
print('Resend an ACK for window 1')
counter_w1 += 1
bitmap = '0000001'
ack = ACK(profile_downlink, rule_id, dtag, w, bitmap,
'0')
response_json = send_ack(request_dict, ack)
print("200, Response content -> {}".format(
response_json))
# response = {request_dict['device']: {'downlinkData': '07f7ffffffffffff'}}
# print("response -> {}".format(response))
return response_json, 200
elif counter_w1 == 3:
print(
'ACK already send for this window, send last ACK')
counter_w1 = 0
bitmap = '0100001'
ack = ACK(profile_downlink, rule_id, dtag, w, bitmap,
'1')
response_json = send_ack(request_dict, ack)
print("200, Response content -> {}".format(
response_json))
# response = {request_dict['device']: {'downlinkData': '07f7ffffffffffff'}}
# print("response -> {}".format(response))
return response_json, 200
bitmap = '0100001'
ack = ACK(profile_downlink, rule_id, dtag, w, bitmap,
'1')
response_json = send_ack(request_dict, ack)
print("200, Response content -> {}".format(
response_json))
counter_w1 += 1
# Create an ACK message and send it.
bitmap = '0000001'
ack = ACK(profile_downlink, rule_id, dtag, w, bitmap, '0')
# Test for loss of All-0 in window 0
bitmap = '1010110'
ack = ACK(profile_downlink, rule_id, dtag, '00', bitmap,
'0')
# ack = ACK(profile_downlink, rule_id, dtag, w, bitmap, '1')
response_json = send_ack(request_dict, ack)
print("200, Response content -> {}".format(response_json))
# response = {request_dict['device']: {'downlinkData': '07f7ffffffffffff'}}
# print("response -> {}".format(response))
return response_json, 200
else:
return '', 204
return '', 204
else:
return f'Not a correct format message', 404
def post(fragment_sent, retransmit=False):
global seqNumber, attempts, current_window, last_window, i, sent, received, retransmitted
headers = {'content-type': 'application/json'}
profile = fragment_sent.profile
if fragment_sent.is_all_0() and not retransmit:
print("[POST] This is an All-0. Using All-0 SIGFOX_DL_TIMEOUT.")
request_timeout = profile.SIGFOX_DL_TIMEOUT
elif fragment_sent.is_all_1():
print(
"[POST] This is an All-1. Using RETRANSMISSION_TIMER_VALUE. Increasing ACK attempts."
)
attempts += 1
request_timeout = profile.RETRANSMISSION_TIMER_VALUE
else:
request_timeout = 45
payload_dict = {
"deviceType": "WYSCHC",
"device": device,
"time": str(int(time.time())),
"data": fragment_sent.hex,
"seqNumber": str(seqNumber),
"ack": fragment_sent.expects_ack() and not retransmit
}
print(
f"[POST] Posting fragment {fragment_sent.header.string} ({fragment_sent.hex}) to {SCHC_POST_URL}"
)
try:
response = requests.post(SCHC_POST_URL,
data=json.dumps(payload_dict),
headers=headers,
timeout=request_timeout)
if fragment_sent.is_sender_abort():
print("Sent Sender-Abort. Goodbye")
exit(1)
seqNumber += 1
sent += 1
if retransmit:
retransmitted += 1
print(f"[POST] Response: {response}")
http_code = response.status_code
# If 500, exit with an error
if http_code == 500:
print("Response: 500 Internal Server Error")
exit(1)
# If 204, the fragment was posted successfully
elif http_code == 204:
print("Response: 204 No Content")
if fragment_sent.is_all_0() and not retransmit:
print("Faking timeout")
time.sleep(profile.SIGFOX_DL_TIMEOUT)
raise Timeout
if not retransmit:
i += 1
return
# If 200, the fragment was posted and an ACK has been received.
elif http_code == 200:
print(
f"Response: 200 OK, Text: {response.text}. Ressetting attempts counter to 0."
)
received += 1
attempts = 0
ack = response.json()[device]["downlinkData"]
# Parse ACK
ack_object = ACK.parse_from_hex(profile_uplink, ack)
if ack_object.is_receiver_abort():
print(
"ERROR: Receiver Abort received. Aborting communication.")
exit(1)
if not fragment_sent.expects_ack():
print(f"ERROR: ACK received but not requested ({ack}).")
exit(1)
# Extract data from ACK
ack_window = ack_object.w
ack_window_number = ack_object.window_number
c = ack_object.c
bitmap = ack_object.bitmap
print(f"ACK: {ack}")
print(f"ACK window: {str(ack_window)}")
print(f"ACK bitmap: {bitmap}")
print(f"ACK C bit: {c}")
print(f"last window: {last_window}")
# If the W field in the SCHC ACK corresponds to the last window of the SCHC Packet:
if ack_window_number == last_window:
# If the C bit is set, the sender MAY exit successfully.
if c == '1':
print(
"Last ACK received, fragments reassembled successfully. End of transmission."
)
print(
f"TOTAL UPLINK: {sent} ({retransmitted} retransmisiones)"
)
print(f"TOTAL DOWNLINK: {received}")
exit(0)
# Otherwise,
else:
# If the Profile mandates that the last tile be sent in an All-1 SCHC Fragment
# (we are in the last window), .is_all_1() should be true:
if fragment_sent.is_all_1():
# This is the last bitmap, it contains the data up to the All-1 fragment.
last_bitmap = bitmap[:len(fragment_list) % window_size]
print(f"last bitmap {last_bitmap}")
# If the SCHC ACK shows no missing tile at the receiver, abort.
# (C = 0 but transmission complete)
if last_bitmap[0] == '1' and all(last_bitmap):
print(
"ERROR: SCHC ACK shows no missing tile at the receiver."
)
post(
SenderAbort(fragment_sent.profile,
fragment_sent.header))
# Otherwise (fragments are lost),
else:
# Check for lost fragments.
for j in range(len(last_bitmap)):
# If the j-th bit of the bitmap is 0, then the j-th fragment was lost.
if last_bitmap[j] == '0':
print(
f"The {j}th ({window_size * ack_window_number + j} / {len(fragment_list)}) fragment was lost! Sending again..."
)
# Try sending again the lost fragment.
fragment_to_be_resent = Fragment(
profile_uplink,
fragment_list[window_size * ack_window
+ j])
print(
f"Lost fragment: {fragment_to_be_resent.string}"
)
post(fragment_to_be_resent,
retransmit=True)
# Send All-1 again to end communication.
post(fragment_sent)
else:
print(
"ERROR: While being at the last window, the ACK-REQ was not an All-1."
"This is outside of the Sigfox scope.")
exit(1)
# Otherwise, there are lost fragments in a non-final window.
else:
# Check for lost fragments.
for j in range(len(bitmap)):
# If the j-th bit of the bitmap is 0, then the j-th fragment was lost.
if bitmap[j] == '0':
print(
f"The {j}th ({window_size * ack_window_number + j} / {len(fragment_list)}) fragment was lost! Sending again..."
)
# Try sending again the lost fragment.
fragment_to_be_resent = Fragment(
profile_uplink,
fragment_list[window_size * ack_window_number + j])
print(f"Lost fragment: {fragment_to_be_resent.string}")
post(fragment_to_be_resent, retransmit=True)
if fragment_sent.is_all_1():
# Send All-1 again to end communication.
post(fragment_sent)
elif fragment_sent.is_all_0():
i += 1
current_window += 1
# If the timer expires
except Timeout:
# If an ACK was expected
if fragment_sent.is_all_1():
# If the attempts counter is strictly less than MAX_ACK_REQUESTS, try again
if attempts < profile_uplink.MAX_ACK_REQUESTS:
print(
"SCHC Timeout reached while waiting for an ACK. Sending the ACK Request again..."
)
post(fragment_sent)
# Else, exit with an error.
else:
print("ERROR: MAX_ACK_REQUESTS reached. Sending Sender-Abort.")
header = fragment_sent.header
abort = SenderAbort(profile, header)
post(abort)
# If the ACK can be not sent (Sigfox only)
if fragment_sent.is_all_0():
print("All-0 timeout reached. Proceeding to next window.")
if not retransmit:
i += 1
current_window += 1
# Else, HTTP communication failed.
else:
print("ERROR: HTTP Timeout reached.")
exit(1)
# (a whole SCHC packet)
attempts = 0
fragment = None
if len(fragment_list) > (2**profile_uplink.M) * window_size:
print(len(fragment_list))
print((2**profile_uplink.M) * window_size)
print(
"ERROR: The SCHC packet cannot be fragmented in 2 ** M * WINDOW_SIZE fragments or less. A Rule ID cannot be "
"selected.")
exit(1)
# Start sending fragments.
while i < len(fragment_list):
# A fragment has the format "fragment = [header, payload]".
data = bytes(fragment_list[i][0] + fragment_list[i][1])
current_size += len(fragment_list[i][1])
percent = round(float(current_size) / float(total_size) * 100, 2)
# Convert to a Fragment class for easier manipulation.
resent = None
timeout = False
fragment = Fragment(profile_uplink, fragment_list[i])
# Send the data.
print("Sending...")
# On All-0 fragments, this function will wait for SIGFOX_DL_TIMER to expire
# On All-1 fragments, this function will enter retransmission phase.
post(fragment)
start_sending_time = chrono.read()
# Start sending fragments.
CURRENT_STATE = STATE_SEND
while i < len(fragment_list) and tx_status_ok == False:
current_fragment = {}
laps.append(chrono.read())
print("laps - > {}".format(laps))
if not retransmitting:
pycom.rgbled(0x7f7f00) # yellow
# A fragment has the format "fragment = [header, payload]".
data = bytes(fragment_list[i][0] + fragment_list[i][1])
# Convert to a Fragment class for easier manipulation.
fragment = Fragment(profile_uplink, fragment_list[i])
# current_fragment['RULE_ID'] = fragment.header.RULE_ID
# current_fragment['W'] = fragment.header.W
# current_fragment['FCN'] = fragment.header.FCN
# current_fragment['data'] = data
if verbose:
print("--------------------------")
print(str(i) + "th fragment:")
print("RuleID:{}, DTAG:{}, WINDOW:{}, FCN:{}".format(fragment.header.RULE_ID,fragment.header.DTAG,fragment.header.W,fragment.header.FCN))
print("SCHC Fragment: {}".format(data))
print("SCHC Fragment Payload: {}".format(fragment_list[i][1]))
current_size += len(fragment_list[i][1])
if (total_size!= 0): percent = round(float(current_size) / float(total_size) * 100, 2)
def insert_index(ls, pos, elmt):
while len(ls) < pos:
ls.append([])
ls.insert(pos, elmt)
def replace_bit(string, position, value):
return '%s%s%s' % (string[:position], value, string[position + 1:])
def find(string, character):
return [i for i, ltr in enumerate(string) if ltr == character]
# ----------Fragment loss emulation
profile_uplink = Sigfox("UPLINK", "ACK ON ERROR")
data = [bytes([fragment[0]]), bytearray(fragment[1:])]
fragment_message = Fragment(profile_uplink, data)
if not fragment_message.is_all_0() and not fragment_message.is_all_1():
coin = random.random()
if coin * 100 < loss_rate:
print("[LOSS] The fragment was lost.")
continue
# ACTUAL CODE: A fragment was received.
# Initialize variables.
time_received = datetime.now()
timestamp = open("timestamp", "w")
timestamp.write(time_received.strftime(time_format))
timestamp.close()
profile_uplink = Sigfox("UPLINK", "NO ACK")
f = data.read()
payload = bytearray(f)
print("The payload to be transmitted is: " + str(payload))
test_header = Header(profile, rule_id="RR", dtag="D", w="WW", fcn="000", c=0)
test_header.test()
fragmenter = Fragmenter(profile, payload)
fragment_list = fragmenter.fragment()
print("Fragments:")
for fragment in fragment_list:
print(fragment)
if Fragment(profile, fragment_list[-1]).is_all_1() is True:
print("All-1 condition satisfied")
else:
print("All-1 condition NOT satisfied")
# print("Rebuilding message...")
#
# reassembler = Reassembler(profile, fragment_list)
# rebuild = reassembler.reassemble()
#
# print("Rebuilt message: \n" + rebuild)
#
# if payload in rebuild:
# print("The message has been rebuilt successfully :D ! Though padding bits are still present.")
# else:
# print("There has been an error rebuilding the packet ):")
