def parse(self, filename):
"""
Method to parse the file `filename`. It returns a matrix with all the coordinates.
:param string filename: name of the input file.
:return: mesh_points: it is a `n_points`-by-3 matrix containing the coordinates of
the points of the mesh
:rtype: numpy.ndarray
"""
self.infile = filename
self.shape = self.load_shape_from_file(filename)
# cycle on the faces to get the control points
# init some quantities
n_faces = 0
control_point_position = [0]
faces_explorer = TopExp_Explorer(self.shape, TopAbs_FACE)
mesh_points = np.zeros(shape=(0, 3))
while faces_explorer.More():
# performing some conversions to get the right format (BSplineSurface)
face = OCC.TopoDS.topods_Face(faces_explorer.Current())
nurbs_converter = BRepBuilderAPI_NurbsConvert(face)
nurbs_converter.Perform(face)
nurbs_face = nurbs_converter.Shape()
brep_face = BRep_Tool.Surface(OCC.TopoDS.topods_Face(nurbs_face))
bspline_face = geomconvert_SurfaceToBSplineSurface(brep_face)
# openCascade object
occ_face = bspline_face.GetObject()
# extract the Control Points of each face
n_poles_u = occ_face.NbUPoles()
n_poles_v = occ_face.NbVPoles()
control_polygon_coordinates = np.zeros(\
shape=(n_poles_u * n_poles_v, 3))
# cycle over the poles to get their coordinates
i = 0
for pole_u_direction in range(n_poles_u):
for pole_v_direction in range(n_poles_v):
control_point_coordinates = occ_face.Pole(\
pole_u_direction + 1, pole_v_direction + 1)
control_polygon_coordinates[i, :] = [control_point_coordinates.X(),\
control_point_coordinates.Y(),\
control_point_coordinates.Z()]
i += 1
# pushing the control points coordinates to the mesh_points array (used for FFD)
mesh_points = np.append(
mesh_points, control_polygon_coordinates, axis=0)
control_point_position.append(
control_point_position[-1] + n_poles_u * n_poles_v)
n_faces += 1
faces_explorer.Next()
self._control_point_position = control_point_position
return mesh_points
def parse(self, filename): """ Method to parse the file `filename`. It returns a matrix with all the coordinates. :param string filename: name of the input file. :return: mesh_points: it is a `n_points`-by-3 matrix containing the coordinates of the points of the mesh :rtype: numpy.ndarray """ self.infile = filename self.shape = self.load_shape_from_file(filename) # cycle on the faces to get the control points # init some quantities n_faces = 0 control_point_position = [0] faces_explorer = TopExp_Explorer(self.shape, TopAbs_FACE) mesh_points = np.zeros(shape=(0, 3)) while faces_explorer.More(): # performing some conversions to get the right format (BSplineSurface) face = OCC.TopoDS.topods_Face(faces_explorer.Current()) nurbs_converter = BRepBuilderAPI_NurbsConvert(face) nurbs_converter.Perform(face) nurbs_face = nurbs_converter.Shape() brep_face = BRep_Tool.Surface(OCC.TopoDS.topods_Face(nurbs_face)) bspline_face = geomconvert_SurfaceToBSplineSurface(brep_face) # openCascade object occ_face = bspline_face.GetObject() # extract the Control Points of each face n_poles_u = occ_face.NbUPoles() n_poles_v = occ_face.NbVPoles() control_polygon_coordinates = np.zeros(\ shape=(n_poles_u * n_poles_v, 3)) # cycle over the poles to get their coordinates i = 0 for pole_u_direction in xrange(n_poles_u): for pole_v_direction in xrange(n_poles_v): control_point_coordinates = occ_face.Pole(\ pole_u_direction + 1, pole_v_direction + 1) control_polygon_coordinates[i, :] = [control_point_coordinates.X(),\ control_point_coordinates.Y(),\ control_point_coordinates.Z()] i += 1 # pushing the control points coordinates to the mesh_points array (used for FFD) mesh_points = np.append(mesh_points, control_polygon_coordinates, axis=0) control_point_position.append(control_point_position[-1] + n_poles_u * n_poles_v) n_faces += 1 faces_explorer.Next() self._control_point_position = control_point_position return mesh_points
def write(self, mesh_points, filename, tolerance=None):
"""
Writes a output file, called filename, copying all the structures from self.filename but
the coordinates. mesh_points is a matrix that contains the new coordinates to
write in the output file.
:param numpy.ndarray mesh_points: it is a `n_points`-by-3 matrix containing
the coordinates of the points of the mesh
:param string filename: name of the output file.
:param float tolerance: tolerance for the construction of the faces and wires
in the write function. If not given it uses `self.tolerance`.
"""
self._check_filename_type(filename)
self._check_extension(filename)
self._check_infile_instantiation()
self.outfile = filename
if tolerance is not None:
self.tolerance = tolerance
# cycle on the faces to update the control points position
# init some quantities
faces_explorer = TopExp_Explorer(self.shape, TopAbs_FACE)
n_faces = 0
control_point_position = self._control_point_position
compound_builder = BRep_Builder()
compound = OCC.TopoDS.TopoDS_Compound()
compound_builder.MakeCompound(compound)
while faces_explorer.More():
# similar to the parser method
face = OCC.TopoDS.topods_Face(faces_explorer.Current())
nurbs_converter = BRepBuilderAPI_NurbsConvert(face)
nurbs_converter.Perform(face)
nurbs_face = nurbs_converter.Shape()
face_aux = OCC.TopoDS.topods_Face(nurbs_face)
brep_face = BRep_Tool.Surface(OCC.TopoDS.topods_Face(nurbs_face))
bspline_face = geomconvert_SurfaceToBSplineSurface(brep_face)
occ_face = bspline_face.GetObject()
n_poles_u = occ_face.NbUPoles()
n_poles_v = occ_face.NbVPoles()
i = 0
for pole_u_direction in range(n_poles_u):
for pole_v_direction in range(n_poles_v):
control_point_coordinates = mesh_points[
i + control_point_position[n_faces], :]
point_xyz = gp_XYZ(*control_point_coordinates)
gp_point = gp_Pnt(point_xyz)
occ_face.SetPole(pole_u_direction + 1,
pole_v_direction + 1, gp_point)
i += 1
# construct the deformed wire for the trimmed surfaces
wire_maker = BRepBuilderAPI_MakeWire()
tol = ShapeFix_ShapeTolerance()
brep = BRepBuilderAPI_MakeFace(occ_face.GetHandle(),
self.tolerance).Face()
brep_face = BRep_Tool.Surface(brep)
# cycle on the edges
edge_explorer = TopExp_Explorer(nurbs_face, TopAbs_EDGE)
while edge_explorer.More():
edge = OCC.TopoDS.topods_Edge(edge_explorer.Current())
# edge in the (u,v) coordinates
edge_uv_coordinates = BRep_Tool.CurveOnSurface(edge, face_aux)
# evaluating the new edge: same (u,v) coordinates, but different (x,y,x) ones
edge_phis_coordinates_aux = BRepBuilderAPI_MakeEdge(\
edge_uv_coordinates[0], brep_face)
edge_phis_coordinates = edge_phis_coordinates_aux.Edge()
tol.SetTolerance(edge_phis_coordinates, self.tolerance)
wire_maker.Add(edge_phis_coordinates)
edge_explorer.Next()
# grouping the edges in a wire
wire = wire_maker.Wire()
# trimming the surfaces
brep_surf = BRepBuilderAPI_MakeFace(occ_face.GetHandle(),
wire).Shape()
compound_builder.Add(compound, brep_surf)
n_faces += 1
faces_explorer.Next()
self.write_shape_to_file(compound, self.outfile)
def write(self, mesh_points, filename, tolerance=None): """ Writes a iges file, called filename, copying all the structures from self.filename but the coordinates. mesh_points is a matrix that contains the new coordinates to write in the iges file. :param numpy.ndarray mesh_points: it is a `n_points`-by-3 matrix containing the coordinates of the points of the mesh :param string filename: name of the output file. :param float tolerance: tolerance for the construction of the faces and wires in the write function. If not given it uses `self.tolerance`. """ self._check_filename_type(filename) self._check_extension(filename) self._check_infile_instantiation(self.infile) self.outfile = filename if tolerance is not None: self.tolerance = tolerance # init the ouput file writer writer = IGESControl_Writer() # read in the IGES file reader = IGESControl_Reader() reader.ReadFile(self.infile) reader.TransferRoots() shape_read = reader.Shape() # cycle on the faces to update the control points position # init some quantities faces_explorer = TopExp_Explorer(shape_read, TopAbs_FACE) n_faces = 0 control_point_position = self._control_point_position compound_builder = BRep_Builder() compound = OCC.TopoDS.TopoDS_Compound() compound_builder.MakeCompound(compound) while faces_explorer.More(): # similar to the parser method iges_face = OCC.TopoDS.topods_Face(faces_explorer.Current()) iges_nurbs_converter = BRepBuilderAPI_NurbsConvert(iges_face) iges_nurbs_converter.Perform(iges_face) nurbs_face = iges_nurbs_converter.Shape() face_aux = OCC.TopoDS.topods_Face(nurbs_face) brep_face = BRep_Tool.Surface(OCC.TopoDS.topods_Face(nurbs_face)) bspline_face = geomconvert_SurfaceToBSplineSurface(brep_face) occ_face = bspline_face.GetObject() n_poles_u = occ_face.NbUPoles() n_poles_v = occ_face.NbVPoles() i = 0 for pole_u_direction in xrange(n_poles_u): for pole_v_direction in xrange(n_poles_v): control_point_coordinates = mesh_points[i+control_point_position[n_faces], :] point_xyz = gp_XYZ(control_point_coordinates[0], control_point_coordinates[1], \ control_point_coordinates[2]) gp_point = gp_Pnt(point_xyz) occ_face.SetPole(pole_u_direction+1, pole_v_direction+1, gp_point) i += 1 # construct the deformed wire for the trimmed surfaces wire_maker = BRepBuilderAPI_MakeWire() tol = ShapeFix_ShapeTolerance() brep = BRepBuilderAPI_MakeFace(occ_face.GetHandle(), self.tolerance).Face() brep_face = BRep_Tool.Surface(brep) # cycle on the edges edge_explorer = TopExp_Explorer(nurbs_face, TopAbs_EDGE) while edge_explorer.More(): edge = OCC.TopoDS.topods_Edge(edge_explorer.Current()) # edge in the (u,v) coordinates edge_uv_coordinates = OCC.BRep.BRep_Tool.CurveOnSurface(edge, face_aux) # evaluating the new edge: same (u,v) coordinates, but different (x,y,x) ones edge_phis_coordinates_aux = BRepBuilderAPI_MakeEdge(edge_uv_coordinates[0], brep_face) edge_phis_coordinates = edge_phis_coordinates_aux.Edge() tol.SetTolerance(edge_phis_coordinates, self.tolerance) wire_maker.Add(edge_phis_coordinates) edge_explorer.Next() # grouping the edges in a wire wire = wire_maker.Wire() # trimming the surfaces brep_surf = BRepBuilderAPI_MakeFace(occ_face.GetHandle(), wire).Shape() compound_builder.Add(compound, brep_surf) n_faces += 1 faces_explorer.Next() writer.AddShape(compound) writer.Write(self.outfile)
def write_face(self, points_face, list_points_edge, topo_face, toledge):
"""
Method to recreate a Face associated to a geometric surface
after the modification of Face points. It returns a TopoDS_Face.
:param points_face: the new face points array.
:param list_points_edge: new edge points
:param topo_face: the face to be modified
:param toledge: tolerance on the surface creation after modification
:return: TopoDS_Face (Shape)
:rtype: TopoDS_Shape
"""
# convert Face to Geom B-spline Surface
nurbs_converter = BRepBuilderAPI_NurbsConvert(topo_face)
nurbs_converter.Perform(topo_face)
nurbs_face = nurbs_converter.Shape()
topo_nurbsface = topods.Face(nurbs_face)
h_geomsurface = BRep_Tool.Surface(topo_nurbsface)
h_bsurface = geomconvert_SurfaceToBSplineSurface(h_geomsurface)
bsurface = h_bsurface.GetObject()
nb_u = bsurface.NbUPoles()
nb_v = bsurface.NbVPoles()
# check consistency
if points_face.shape[0] != nb_u * nb_v:
raise ValueError("Input control points do not have not have the "
"same number as the geometric face!")
# cycle on the face points
indice_cpt = 0
for iu in range(1, nb_u + 1):
for iv in range(1, nb_v + 1):
cpt = points_face[indice_cpt]
bsurface.SetPole(iu, iv, gp_Pnt(cpt[0], cpt[1], cpt[2]))
indice_cpt += 1
# create modified new face
new_bspline_tface = BRepBuilderAPI_MakeFace()
toler = precision_Confusion()
new_bspline_tface.Init(bsurface.GetHandle(), False, toler)
# cycle on the wires
face_wires_explorer = TopExp_Explorer(
topo_nurbsface.Oriented(TopAbs_FORWARD), TopAbs_WIRE)
ind_edge_total = 0
while face_wires_explorer.More():
# get old wire
twire = topods_Wire(face_wires_explorer.Current())
# cycle on the edges
ind_edge = 0
wire_explorer_edge = TopExp_Explorer(
twire.Oriented(TopAbs_FORWARD), TopAbs_EDGE)
# check edges order on the wire
mode3d = True
tolerance_edges = toledge
wire_order = ShapeAnalysis_WireOrder(mode3d, tolerance_edges)
# an edge list
deformed_edges = []
# cycle on the edges
while wire_explorer_edge.More():
tedge = topods_Edge(wire_explorer_edge.Current())
new_bspline_tedge = self.write_edge(
list_points_edge[ind_edge_total], tedge)
deformed_edges.append(new_bspline_tedge)
analyzer = topexp()
vfirst = analyzer.FirstVertex(new_bspline_tedge)
vlast = analyzer.LastVertex(new_bspline_tedge)
pt1 = BRep_Tool.Pnt(vfirst)
pt2 = BRep_Tool.Pnt(vlast)
wire_order.Add(pt1.XYZ(), pt2.XYZ())
ind_edge += 1
ind_edge_total += 1
wire_explorer_edge.Next()
# grouping the edges in a wire, then in the face
# check edges order and connectivity within the wire
wire_order.Perform()
# new wire to be created
stol = ShapeFix_ShapeTolerance()
new_bspline_twire = BRepBuilderAPI_MakeWire()
for order_i in range(1, wire_order.NbEdges() + 1):
deformed_edge_i = wire_order.Ordered(order_i)
if deformed_edge_i > 0:
# insert the deformed edge to the new wire
new_edge_toadd = deformed_edges[deformed_edge_i - 1]
stol.SetTolerance(new_edge_toadd, toledge)
new_bspline_twire.Add(new_edge_toadd)
if new_bspline_twire.Error() != 0:
stol.SetTolerance(new_edge_toadd, toledge * 10.0)
new_bspline_twire.Add(new_edge_toadd)
else:
deformed_edge_revers = deformed_edges[
np.abs(deformed_edge_i) - 1]
stol.SetTolerance(deformed_edge_revers, toledge)
new_bspline_twire.Add(deformed_edge_revers)
if new_bspline_twire.Error() != 0:
stol.SetTolerance(deformed_edge_revers, toledge * 10.0)
new_bspline_twire.Add(deformed_edge_revers)
# add new wire to the Face
new_bspline_tface.Add(new_bspline_twire.Wire())
face_wires_explorer.Next()
return topods.Face(new_bspline_tface.Face())
def parse_face(topo_face):
"""
Method to parse a single `Face` (a single patch nurbs surface).
It returns a matrix with all the coordinates of control points of the
`Face` and a second list with all the control points related to the
`Edges` of the `Face.`
:param Face topo_face: the input Face.
:return: control points of the `Face`, control points related to
`Edges`.
:rtype: tuple(numpy.ndarray, list)
"""
# get some Face - Edge - Vertex data map information
mesh_points_edge = []
face_exp_wire = TopExp_Explorer(topo_face, TopAbs_WIRE)
# loop on wires per face
while face_exp_wire.More():
twire = topods_Wire(face_exp_wire.Current())
wire_exp_edge = TopExp_Explorer(twire, TopAbs_EDGE)
# loop on edges per wire
while wire_exp_edge.More():
edge = topods_Edge(wire_exp_edge.Current())
bspline_converter = BRepBuilderAPI_NurbsConvert(edge)
bspline_converter.Perform(edge)
bspline_tshape_edge = bspline_converter.Shape()
h_geom_edge = BRep_Tool_Curve(
topods_Edge(bspline_tshape_edge))[0]
h_bspline_edge = geomconvert_CurveToBSplineCurve(h_geom_edge)
bspline_geom_edge = h_bspline_edge.GetObject()
nb_poles = bspline_geom_edge.NbPoles()
# Edge geometric properties
edge_ctrlpts = TColgp_Array1OfPnt(1, nb_poles)
bspline_geom_edge.Poles(edge_ctrlpts)
points_single_edge = np.zeros((0, 3))
for i in range(1, nb_poles + 1):
ctrlpt = edge_ctrlpts.Value(i)
ctrlpt_position = np.array(
[[ctrlpt.Coord(1),
ctrlpt.Coord(2),
ctrlpt.Coord(3)]])
points_single_edge = np.append(
points_single_edge, ctrlpt_position, axis=0)
mesh_points_edge.append(points_single_edge)
wire_exp_edge.Next()
face_exp_wire.Next()
# extract mesh points (control points) on Face
mesh_points_face = np.zeros((0, 3))
# convert Face to Geom B-spline Face
nurbs_converter = BRepBuilderAPI_NurbsConvert(topo_face)
nurbs_converter.Perform(topo_face)
nurbs_face = nurbs_converter.Shape()
h_geomsurface = BRep_Tool.Surface(topods.Face(nurbs_face))
h_bsurface = geomconvert_SurfaceToBSplineSurface(h_geomsurface)
bsurface = h_bsurface.GetObject()
# get access to control points (poles)
nb_u = bsurface.NbUPoles()
nb_v = bsurface.NbVPoles()
ctrlpts = TColgp_Array2OfPnt(1, nb_u, 1, nb_v)
bsurface.Poles(ctrlpts)
for indice_u_direction in range(1, nb_u + 1):
for indice_v_direction in range(1, nb_v + 1):
ctrlpt = ctrlpts.Value(indice_u_direction, indice_v_direction)
ctrlpt_position = np.array(
[[ctrlpt.Coord(1),
ctrlpt.Coord(2),
ctrlpt.Coord(3)]])
mesh_points_face = np.append(
mesh_points_face, ctrlpt_position, axis=0)
return mesh_points_face, mesh_points_edge
def write_face(self, points_face, list_points_edge, topo_face, toledge):
"""
Method to recreate a Face associated to a geometric surface
after the modification of Face points. It returns a TopoDS_Face.
:param points_face: the new face points array.
:param list_points_edge: new edge points
:param topo_face: the face to be modified
:param toledge: tolerance on the surface creation after modification
:return: TopoDS_Face (Shape)
:rtype: TopoDS_Shape
"""
# convert Face to Geom B-spline Surface
nurbs_converter = BRepBuilderAPI_NurbsConvert(topo_face)
nurbs_converter.Perform(topo_face)
nurbs_face = nurbs_converter.Shape()
topo_nurbsface = topods.Face(nurbs_face)
h_geomsurface = BRep_Tool.Surface(topo_nurbsface)
h_bsurface = geomconvert_SurfaceToBSplineSurface(h_geomsurface)
bsurface = h_bsurface.GetObject()
nb_u = bsurface.NbUPoles()
nb_v = bsurface.NbVPoles()
# check consistency
if points_face.shape[0] != nb_u * nb_v:
raise ValueError("Input control points do not have not have the "
"same number as the geometric face!")
# cycle on the face points
indice_cpt = 0
for iu in range(1, nb_u + 1):
for iv in range(1, nb_v + 1):
cpt = points_face[indice_cpt]
bsurface.SetPole(iu, iv, gp_Pnt(cpt[0], cpt[1], cpt[2]))
indice_cpt += 1
# create modified new face
new_bspline_tface = BRepBuilderAPI_MakeFace()
toler = precision_Confusion()
new_bspline_tface.Init(bsurface.GetHandle(), False, toler)
# cycle on the wires
face_wires_explorer = TopExp_Explorer(
topo_nurbsface.Oriented(TopAbs_FORWARD), TopAbs_WIRE)
ind_edge_total = 0
while face_wires_explorer.More():
# get old wire
twire = topods_Wire(face_wires_explorer.Current())
# cycle on the edges
ind_edge = 0
wire_explorer_edge = TopExp_Explorer(
twire.Oriented(TopAbs_FORWARD), TopAbs_EDGE)
# check edges order on the wire
mode3d = True
tolerance_edges = toledge
wire_order = ShapeAnalysis_WireOrder(mode3d, tolerance_edges)
# an edge list
deformed_edges = []
# cycle on the edges
while wire_explorer_edge.More():
tedge = topods_Edge(wire_explorer_edge.Current())
new_bspline_tedge = self.write_edge(
list_points_edge[ind_edge_total], tedge)
deformed_edges.append(new_bspline_tedge)
analyzer = topexp()
vfirst = analyzer.FirstVertex(new_bspline_tedge)
vlast = analyzer.LastVertex(new_bspline_tedge)
pt1 = BRep_Tool.Pnt(vfirst)
pt2 = BRep_Tool.Pnt(vlast)
wire_order.Add(pt1.XYZ(), pt2.XYZ())
ind_edge += 1
ind_edge_total += 1
wire_explorer_edge.Next()
# grouping the edges in a wire, then in the face
# check edges order and connectivity within the wire
wire_order.Perform()
# new wire to be created
stol = ShapeFix_ShapeTolerance()
new_bspline_twire = BRepBuilderAPI_MakeWire()
for order_i in range(1, wire_order.NbEdges() + 1):
deformed_edge_i = wire_order.Ordered(order_i)
if deformed_edge_i > 0:
# insert the deformed edge to the new wire
new_edge_toadd = deformed_edges[deformed_edge_i - 1]
stol.SetTolerance(new_edge_toadd, toledge)
new_bspline_twire.Add(new_edge_toadd)
if new_bspline_twire.Error() != 0:
stol.SetTolerance(new_edge_toadd, toledge * 10.0)
new_bspline_twire.Add(new_edge_toadd)
else:
deformed_edge_revers = deformed_edges[
np.abs(deformed_edge_i) - 1]
stol.SetTolerance(deformed_edge_revers, toledge)
new_bspline_twire.Add(deformed_edge_revers)
if new_bspline_twire.Error() != 0:
stol.SetTolerance(deformed_edge_revers, toledge * 10.0)
new_bspline_twire.Add(deformed_edge_revers)
# add new wire to the Face
new_bspline_tface.Add(new_bspline_twire.Wire())
face_wires_explorer.Next()
return topods.Face(new_bspline_tface.Face())
def parse_face(topo_face):
"""
Method to parse a single Face (a single patch nurbs surface).
It returns a matrix with all the coordinates of control points of the
Face and a second list with all the control points related to the
Edges of the Face.
:param topo_face: the input Face
:return: mesh_points_face: it is a `n_points`-by-3 matrix containing the
coordinates of the control points of the Face (a nurbs surface)
:return: mesh_points_edge: it is a list of `n_points`-by-3 matrix
:rtype: tuple(numpy.ndarray, list)
"""
# get some Face - Edge - Vertex data map information
mesh_points_edge = []
face_exp_wire = TopExp_Explorer(topo_face, TopAbs_WIRE)
# loop on wires per face
while face_exp_wire.More():
twire = topods_Wire(face_exp_wire.Current())
wire_exp_edge = TopExp_Explorer(twire, TopAbs_EDGE)
# loop on edges per wire
while wire_exp_edge.More():
edge = topods_Edge(wire_exp_edge.Current())
bspline_converter = BRepBuilderAPI_NurbsConvert(edge)
bspline_converter.Perform(edge)
bspline_tshape_edge = bspline_converter.Shape()
h_geom_edge = BRep_Tool_Curve(
topods_Edge(bspline_tshape_edge))[0]
h_bspline_edge = geomconvert_CurveToBSplineCurve(h_geom_edge)
bspline_geom_edge = h_bspline_edge.GetObject()
nb_poles = bspline_geom_edge.NbPoles()
# Edge geometric properties
edge_ctrlpts = TColgp_Array1OfPnt(1, nb_poles)
bspline_geom_edge.Poles(edge_ctrlpts)
points_single_edge = np.zeros((0, 3))
for i in range(1, nb_poles + 1):
ctrlpt = edge_ctrlpts.Value(i)
ctrlpt_position = np.array(
[[ctrlpt.Coord(1),
ctrlpt.Coord(2),
ctrlpt.Coord(3)]])
points_single_edge = np.append(points_single_edge,
ctrlpt_position,
axis=0)
mesh_points_edge.append(points_single_edge)
wire_exp_edge.Next()
face_exp_wire.Next()
# extract mesh points (control points) on Face
mesh_points_face = np.zeros((0, 3))
# convert Face to Geom B-spline Face
nurbs_converter = BRepBuilderAPI_NurbsConvert(topo_face)
nurbs_converter.Perform(topo_face)
nurbs_face = nurbs_converter.Shape()
h_geomsurface = BRep_Tool.Surface(topods.Face(nurbs_face))
h_bsurface = geomconvert_SurfaceToBSplineSurface(h_geomsurface)
bsurface = h_bsurface.GetObject()
# get access to control points (poles)
nb_u = bsurface.NbUPoles()
nb_v = bsurface.NbVPoles()
ctrlpts = TColgp_Array2OfPnt(1, nb_u, 1, nb_v)
bsurface.Poles(ctrlpts)
for indice_u_direction in range(1, nb_u + 1):
for indice_v_direction in range(1, nb_v + 1):
ctrlpt = ctrlpts.Value(indice_u_direction, indice_v_direction)
ctrlpt_position = np.array(
[[ctrlpt.Coord(1),
ctrlpt.Coord(2),
ctrlpt.Coord(3)]])
mesh_points_face = np.append(mesh_points_face,
ctrlpt_position,
axis=0)
return mesh_points_face, mesh_points_edge
def write(cls, filename, data, tolerance=1e-6):
# cycle on the faces to update the control points position
# init some quantities
shape = data.shape
control_point_position = data.control_point_position
mesh_points = data.points
faces_explorer = TopExp_Explorer(shape, TopAbs_FACE)
n_faces = 0
compound_builder = BRep_Builder()
compound = TopoDS_Compound()
compound_builder.MakeCompound(compound)
while faces_explorer.More():
# similar to the parser method
face = topods_Face(faces_explorer.Current())
nurbs_converter = BRepBuilderAPI_NurbsConvert(face)
nurbs_converter.Perform(face)
nurbs_face = nurbs_converter.Shape()
face_aux = topods_Face(nurbs_face)
brep_face = BRep_Tool.Surface(topods_Face(nurbs_face))
bspline_face = geomconvert_SurfaceToBSplineSurface(brep_face)
occ_face = bspline_face.GetObject()
n_poles_u = occ_face.NbUPoles()
n_poles_v = occ_face.NbVPoles()
i = 0
for pole_u_direction in range(n_poles_u):
for pole_v_direction in range(n_poles_v):
control_point_coordinates = mesh_points[
+control_point_position[n_faces], :]
point_xyz = gp_XYZ(*control_point_coordinates)
gp_point = gp_Pnt(point_xyz)
occ_face.SetPole(pole_u_direction + 1,
pole_v_direction + 1, gp_point)
i += 1
# construct the deformed wire for the trimmed surfaces
wire_maker = BRepBuilderAPI_MakeWire()
tol = ShapeFix_ShapeTolerance()
brep = BRepBuilderAPI_MakeFace(occ_face.GetHandle(),
tolerance).Face()
brep_face = BRep_Tool.Surface(brep)
# cycle on the edges
edge_explorer = TopExp_Explorer(nurbs_face, TopAbs_EDGE)
while edge_explorer.More():
edge = topods_Edge(edge_explorer.Current())
# edge in the (u,v) coordinates
edge_uv_coordinates = BRep_Tool.CurveOnSurface(edge, face_aux)
# evaluating the new edge: same (u,v) coordinates, but
# different (x,y,x) ones
edge_phis_coordinates_aux = BRepBuilderAPI_MakeEdge(
edge_uv_coordinates[0], brep_face)
edge_phis_coordinates = edge_phis_coordinates_aux.Edge()
tol.SetTolerance(edge_phis_coordinates, tolerance)
wire_maker.Add(edge_phis_coordinates)
edge_explorer.Next()
# grouping the edges in a wire
wire = wire_maker.Wire()
# trimming the surfaces
brep_surf = BRepBuilderAPI_MakeFace(occ_face.GetHandle(),
wire).Shape()
compound_builder.Add(compound, brep_surf)
n_faces += 1
faces_explorer.Next()
IGESControl_Controller_Init()
writer = IGESControl_Writer()
writer.AddShape(compound)
writer.Write(filename)
def read(cls, filename):
controller = IGESControl_Controller()
controller.Init()
reader = IGESControl_Reader()
reader.ReadFile(filename)
reader.TransferRoots()
shape = reader.OneShape()
n_faces = 0
control_point_position = [0]
faces_explorer = TopExp_Explorer(shape, TopAbs_FACE)
mesh_points = np.zeros(shape=(0, 3))
while faces_explorer.More():
# performing some conversions to get the right format (BSplineSurface)
face = topods_Face(faces_explorer.Current())
nurbs_converter = BRepBuilderAPI_NurbsConvert(face)
nurbs_converter.Perform(face)
nurbs_face = nurbs_converter.Shape()
brep_face = BRep_Tool.Surface(topods_Face(nurbs_face))
bspline_face = geomconvert_SurfaceToBSplineSurface(brep_face)
# openCascade object
occ_face = bspline_face.GetObject()
# extract the Control Points of each face
n_poles_u = occ_face.NbUPoles()
n_poles_v = occ_face.NbVPoles()
control_polygon_coordinates = np.zeros(shape=(n_poles_u *
n_poles_v, 3))
# cycle over the poles to get their coordinates
i = 0
for pole_u_direction in range(n_poles_u):
for pole_v_direction in range(n_poles_v):
print(pole_u_direction, pole_v_direction)
control_point_coordinates = occ_face.Pole(
pole_u_direction + 1, pole_v_direction + 1)
control_polygon_coordinates[i, :] = [
control_point_coordinates.X(),
control_point_coordinates.Y(),
control_point_coordinates.Z()
]
i += 1
# pushing the control points coordinates to the mesh_points array
# (used for FFD)
mesh_points = np.append(mesh_points,
control_polygon_coordinates,
axis=0)
control_point_position.append(control_point_position[-1] +
n_poles_u * n_poles_v)
n_faces += 1
faces_explorer.Next()
return {
'shape': shape,
'points': mesh_points,
'control_point_position': control_point_position
}