class Ui_MovePropertyManager(Command_PropertyManager):
# The title that appears in the Property Manager header
title = "Move"
# The name of this Property Manager. This will be set to
# the name of the PM_Dialog object via setObjectName().
pmName = title
# The relative path to the PNG file that appears in the header
iconPath = "ui/actions/Properties Manager/Translate_Components.png"
# The title(s) that appear in the property manager header.
# (these are changed depending on the active group box)
translateTitle = "Translate"
rotateTitle = "Rotate"
# The full path to PNG file(s) that appears in the header.
translateIconPath = "ui/actions/Properties Manager/Translate_Components.png"
rotateIconPath = "ui/actions/Properties Manager/Rotate_Components.png"
def __init__(self, command):
_superclass.__init__(self, command)
self.showTopRowButtons(PM_DONE_BUTTON | PM_WHATS_THIS_BUTTON)
def _addGroupBoxes(self):
"""
Add groupboxes to the Property Manager dialog.
"""
self.translateGroupBox = PM_GroupBox(self,
title="Translate",
connectTitleButton=False)
self.translateGroupBox.titleButton.setShortcut('T')
self._loadTranslateGroupBox(self.translateGroupBox)
self.rotateGroupBox = PM_GroupBox(self,
title="Rotate",
connectTitleButton=False)
self.rotateGroupBox.titleButton.setShortcut('R')
self._loadRotateGroupBox(self.rotateGroupBox)
self.translateGroupBox.collapse()
self.rotateGroupBox.collapse()
# == Begin Translate Group Box =====================
def _loadTranslateGroupBox(self, inPmGroupBox):
"""
Load widgets in the Translate group box.
@param inPmGroupBox: The Translate group box in the PM
@type inPmGroupBox: L{PM_GroupBox}
"""
translateChoices = ["Free Drag", "By Delta XYZ", "To XYZ Position"]
self.translateComboBox = \
PM_ComboBox( inPmGroupBox,
label = '',
choices = translateChoices,
index = 0,
setAsDefault = False,
spanWidth = True )
self.freeDragTranslateGroupBox = PM_GroupBox(inPmGroupBox)
self._loadFreeDragTranslateGroupBox(self.freeDragTranslateGroupBox)
self.byDeltaGroupBox = PM_GroupBox(inPmGroupBox)
self._loadByDeltaGroupBox(self.byDeltaGroupBox)
self.toPositionGroupBox = PM_GroupBox(inPmGroupBox)
self._loadToPositionGroupBox(self.toPositionGroupBox)
self.updateTranslateGroupBoxes(0)
def _loadFreeDragTranslateGroupBox(self, inPmGroupBox):
"""
Load widgets in the Free Drag Translate group box, which is present
within the Translate groupbox.
@param inPmGroupBox: The Free Drag Translate group box in the Translate
group box.
@type inPmGroupBox: L{PM_GroupBox}
"""
# Button list to create a toolbutton row.
# Format:
# - buttonId,
# - buttonText ,
# - iconPath
# - tooltip
# - shortcut
# - column
BUTTON_LIST = [
( "QToolButton", 1, "MOVEDEFAULT",
"ui/actions/Properties Manager/Move_Free.png", "", "F", 0),
( "QToolButton", 2, "TRANSX",
"ui/actions/Properties Manager/TranslateX.png", "", "X", 1),
( "QToolButton", 3, "TRANSY",
"ui/actions/Properties Manager/TranslateY.png", "", "Y", 2),
( "QToolButton", 4, "TRANSZ",
"ui/actions/Properties Manager/TranslateZ.png", "", "Z", 3),
( "QToolButton", 5, "ROT_TRANS_ALONG_AXIS",
"ui/actions/Properties Manager/translate+rotate-A.png", "", \
"A", 4)
]
self.freeDragTranslateButtonGroup = \
PM_ToolButtonRow( inPmGroupBox,
title = "",
buttonList = BUTTON_LIST,
checkedId = 1,
setAsDefault = True,
)
self.transFreeButton = self.freeDragTranslateButtonGroup.getButtonById(
1)
self.transXButton = self.freeDragTranslateButtonGroup.getButtonById(2)
self.transYButton = self.freeDragTranslateButtonGroup.getButtonById(3)
self.transZButton = self.freeDragTranslateButtonGroup.getButtonById(4)
self.transAlongAxisButton = \
self.freeDragTranslateButtonGroup.getButtonById(5)
self.moveFromToButton = PM_ToolButton(
inPmGroupBox,
text = "Translate from/to",
iconPath = "ui/actions/Properties Manager"\
"/Translate_Components.png",
spanWidth = True
)
self.moveFromToButton.setCheckable(True)
self.moveFromToButton.setAutoRaise(True)
self.moveFromToButton.setToolButtonStyle(Qt.ToolButtonTextBesideIcon)
self.startCoordLineEdit = PM_LineEdit(
inPmGroupBox,
label = "ui/actions/Properties Manager"\
"/Move_Start_Point.png",
text = "Define 'from' and 'to' points",
setAsDefault = False,
)
self.startCoordLineEdit.setReadOnly(True)
self.startCoordLineEdit.setEnabled(False)
def _loadByDeltaGroupBox(self, inPmGroupBox):
"""
Load widgets in the translate By Delta group box, which is present
within the Translate groupbox.
@param inPmGroupBox: The Translate By Delta group box in the translate
group box.
@type inPmGroupBox: L{PM_GroupBox}
"""
self.moveDeltaXSpinBox = \
PM_DoubleSpinBox(
inPmGroupBox,
label = "ui/actions/Properties Manager/Delta_X.png",
value = 0.0,
setAsDefault = True,
minimum = -100.0,
maximum = 100.0,
singleStep = 1.0,
decimals = 3,
suffix = ' Angstroms',
spanWidth = False )
self.moveDeltaYSpinBox = \
PM_DoubleSpinBox(
inPmGroupBox,
label = "ui/actions/Properties Manager/Delta_Y.png",
value = 0.0,
setAsDefault = True,
minimum = -100.0,
maximum = 100.0,
singleStep = 1.0,
decimals = 3,
suffix = ' Angstroms',
spanWidth = False )
self.moveDeltaZSpinBox = \
PM_DoubleSpinBox(
inPmGroupBox,
label = "ui/actions/Properties Manager/Delta_Z.png",
value = 0.0,
setAsDefault = True,
minimum = -100.0,
maximum = 100.0,
singleStep = 1.0,
decimals = 3,
suffix = ' Angstroms',
spanWidth = False )
DELTA_BUTTONS = [
("QToolButton", 1, "Delta Plus",
"ui/actions/Properties Manager/Move_Delta_Plus.png", "", "+", 0),
("QToolButton", 2, "Delta Minus",
"ui/actions/Properties Manager/Move_Delta_Minus.png", "", "-", 1)
]
self.translateDeltaButtonRow = \
PM_ToolButtonRow( inPmGroupBox,
title = "",
buttonList = DELTA_BUTTONS,
label = 'Translate:',
isAutoRaise = True,
isCheckable = False
)
self.transDeltaPlusButton = \
self.translateDeltaButtonRow.getButtonById(1)
self.transDeltaMinusButton = \
self.translateDeltaButtonRow.getButtonById(2)
def _loadToPositionGroupBox(self, inPmGroupBox):
"""
Load widgets in the Translate To a given Position group box, which is
present within the Translate groupbox.
@param inPmGroupBox: Translate To Position group box in the Translate
group box.
@type inPmGroupBox: L{PM_GroupBox}
"""
self.toPositionspinboxes = PM_CoordinateSpinBoxes(inPmGroupBox)
self.moveXSpinBox = self.toPositionspinboxes.xSpinBox
self.moveYSpinBox = self.toPositionspinboxes.ySpinBox
self.moveZSpinBox = self.toPositionspinboxes.zSpinBox
self.moveAbsoluteButton = \
PM_PushButton( inPmGroupBox,
label = "",
text = "Move Selection",
spanWidth = True )
# == Begin Rotate Group Box =====================
def _loadRotateGroupBox(self, inPmGroupBox):
"""
Load widgets in the Rotate group box,
@param inPmGroupBox: The Rotate GroupBox in the PM
@type inPmGroupBox: L{PM_GroupBox}
"""
rotateChoices = ["Free Drag", "By Specified Angle"]
self.rotateComboBox = \
PM_ComboBox( inPmGroupBox,
label = '',
choices = rotateChoices,
index = 0,
setAsDefault = False,
spanWidth = True )
self.rotateAsUnitCB = \
PM_CheckBox( inPmGroupBox,
text = 'Rotate as a unit' ,
widgetColumn = 0,
state = Qt.Checked )
self.freeDragRotateGroupBox = PM_GroupBox(inPmGroupBox)
self._loadFreeDragRotateGroupBox(self.freeDragRotateGroupBox)
self.bySpecifiedAngleGroupBox = PM_GroupBox(inPmGroupBox)
self._loadBySpecifiedAngleGroupBox(self.bySpecifiedAngleGroupBox)
self.updateRotateGroupBoxes(0)
def _loadFreeDragRotateGroupBox(self, inPmGroupBox):
"""
Load widgets in the Free Drag Rotate group box, which is
present within the Rotate groupbox.
@param inPmGroupBox: The Free Drag Rotate group box in the Rotate
group box.
@type inPmGroupBox: L{PM_GroupBox}
"""
# Button list to create a toolbutton row.
# Format:
# - buttonId,
# - buttonText ,
# - iconPath
# - tooltip
# - shortcut
# - column
BUTTON_LIST = [
( "QToolButton", 1, "ROTATEDEFAULT",
"ui/actions/Properties Manager/Rotate_Free.png", "", "F", 0 ),
( "QToolButton", 2, "ROTATEX",
"ui/actions/Properties Manager/RotateX.png", "", "X", 1 ),
( "QToolButton", 3, "ROTATEY",
"ui/actions/Properties Manager/RotateY.png", "", "Y", 2 ),
( "QToolButton", 4, "ROTATEZ",
"ui/actions/Properties Manager/RotateZ.png", "", "Z", 3 ),
( "QToolButton", 5, "ROT_TRANS_ALONG_AXIS",
"ui/actions/Properties Manager/translate+rotate-A.png", "", \
"A", 4 )
]
self.freeDragRotateButtonGroup = \
PM_ToolButtonRow( inPmGroupBox,
title = "",
buttonList = BUTTON_LIST,
spanWidth = True,
checkedId = 1,
setAsDefault = True,
)
self.rotateFreeButton = self.freeDragRotateButtonGroup.getButtonById(1)
self.rotateXButton = self.freeDragRotateButtonGroup.getButtonById(2)
self.rotateYButton = self.freeDragRotateButtonGroup.getButtonById(3)
self.rotateZButton = self.freeDragRotateButtonGroup.getButtonById(4)
self.rotAlongAxisButton = \
self.freeDragRotateButtonGroup.getButtonById(5)
inPmGroupBox.setStyleSheet(
self.freeDragRotateButtonGroup._getStyleSheet())
X_ROW_LABELS = [("QLabel", "Delta Theta X:", 0), ("QLabel", "", 1),
("QLabel", "0.00", 2), ("QLabel", "Degrees", 3)]
Y_ROW_LABELS = [("QLabel", "Delta Theta Y:", 0), ("QLabel", "", 1),
("QLabel", "0.00", 2), ("QLabel", "Degrees", 3)]
Z_ROW_LABELS = [("QLabel", "Delta Theta Z:", 0), ("QLabel", "", 1),
("QLabel", "0.00", 2), ("QLabel", "Degrees", 3)]
self.rotateXLabelRow = PM_LabelRow(inPmGroupBox,
title="",
labelList=X_ROW_LABELS)
self.deltaThetaX_lbl = self.rotateXLabelRow.labels[2]
self.rotateYLabelRow = PM_LabelRow(inPmGroupBox,
title="",
labelList=Y_ROW_LABELS)
self.deltaThetaY_lbl = self.rotateYLabelRow.labels[2]
self.rotateZLabelRow = PM_LabelRow(inPmGroupBox,
title="",
labelList=Z_ROW_LABELS)
self.deltaThetaZ_lbl = self.rotateZLabelRow.labels[2]
self.rotateAboutPointButton = PM_ToolButton(
inPmGroupBox,
text = "Rotate selection about a point",
iconPath = "ui/actions/Properties Manager"\
"/Rotate_Components.png",
spanWidth = True
)
self.rotateAboutPointButton.setCheckable(True)
self.rotateAboutPointButton.setAutoRaise(True)
self.rotateAboutPointButton.setToolButtonStyle(
Qt.ToolButtonTextBesideIcon)
self.rotateStartCoordLineEdit = PM_LineEdit(
inPmGroupBox,
label = "ui/actions/Properties Manager"\
"/Move_Start_Point.png",
text = "Define 3 points",
setAsDefault = False,
)
self.rotateStartCoordLineEdit.setReadOnly(True)
self.rotateStartCoordLineEdit.setEnabled(False)
def _loadBySpecifiedAngleGroupBox(self, inPmGroupBox):
"""
Load widgets in the Rotate By Specified Angle group box, which is
present within the Rotate groupbox.
@param inPmGroupBox: Rotate By Specified Angle group box in the Rotate
group box.
@type inPmGroupBox: L{PM_GroupBox}
"""
# Button list to create a toolbutton row.
# Format:
# - buttonId,
# - buttonText ,
# - iconPath
# - tooltip
# - shortcut
# - column
BUTTON_LIST = [
("QToolButton", 1, "ROTATEX",
"ui/actions/Properties Manager/RotateX.png",
"Rotate about X axis", "X", 0),
("QToolButton", 2, "ROTATEY",
"ui/actions/Properties Manager/RotateY.png",
"Rotate about Y axis", "Y", 1),
("QToolButton", 3, "ROTATEZ",
"ui/actions/Properties Manager/RotateZ.png",
"Rotate about Z axis", "Z", 2),
]
self.rotateAroundAxisButtonRow = \
PM_ToolButtonRow( inPmGroupBox,
title = "",
buttonList = BUTTON_LIST,
alignment = 'Right',
label = 'Rotate Around:'
)
self.rotXaxisButton = \
self.rotateAroundAxisButtonRow.getButtonById(1)
self.rotYaxisButton = \
self.rotateAroundAxisButtonRow.getButtonById(2)
self.rotZaxisButton = \
self.rotateAroundAxisButtonRow.getButtonById(3)
self.rotateThetaSpinBox = \
PM_DoubleSpinBox(inPmGroupBox,
label = "Rotate By:",
value = 0.0,
setAsDefault = True,
minimum = 0,
maximum = 360.0,
singleStep = 1.0,
decimals = 2,
suffix = ' Degrees')
THETA_BUTTONS = [
("QToolButton", 1, "Theta Plus",
"ui/actions/Properties Manager/Move_Theta_Plus.png", "", "+", 0),
("QToolButton", 2, "Theta Minus",
"ui/actions/Properties Manager/Move_Theta_Minus.png", "", "-", 1)
]
self.rotateThetaButtonRow = \
PM_ToolButtonRow( inPmGroupBox,
title = "",
buttonList = THETA_BUTTONS,
label = 'Direction:',
isAutoRaise = True,
isCheckable = False
)
self.rotateThetaPlusButton = self.rotateThetaButtonRow.getButtonById(1)
self.rotateThetaMinusButton = self.rotateThetaButtonRow.getButtonById(
2)
# == End Rotate Group Box =====================
# == Slots for Translate group box
def _hideAllTranslateGroupBoxes(self):
"""
Hides all Translate group boxes.
"""
self.toPositionGroupBox.hide()
self.byDeltaGroupBox.hide()
self.freeDragTranslateGroupBox.hide()
def updateTranslateGroupBoxes(self, id):
"""
Update the translate group boxes displayed based on the translate
option selected.
@param id: Integer value corresponding to the combobox item in the
Translate group box.
@type id: int
"""
self._hideAllTranslateGroupBoxes()
if id is 0:
self.freeDragTranslateGroupBox.show()
if id is 1:
self.byDeltaGroupBox.show()
if id is 2:
self.toPositionGroupBox.show()
self.updateMessage()
def changeMoveOption(self, button):
"""
Subclasses should reimplement this method.
@param button: QToolButton that decides the type of translate operation
to be set.
@type button: QToolButton
L{http://doc.trolltech.com/4.2/qtoolbutton.html}
@see: B{MovePropertyManager.changeMoveOption} which overrides this
method
"""
pass
# == Slots for Rotate group box
def updateRotateGroupBoxes(self, id):
"""
Update the translate group boxes displayed based on the translate
option selected.
@param id: Integer value corresponding to the combobox item in the
Rotate group box.
@type id: int
"""
if id is 0:
self.bySpecifiedAngleGroupBox.hide()
self.freeDragRotateGroupBox.show()
if id is 1:
self.freeDragRotateGroupBox.hide()
self.bySpecifiedAngleGroupBox.show()
self.updateMessage()
def changeRotateOption(self, button):
"""
Subclasses should reimplement this method.
@param button: QToolButton that decides the type of rotate operation
to be set.
@type button: QToolButton
L{http://doc.trolltech.com/4.2/qtoolbutton.html}
@see: B{MovePropertyManage.changeRotateOption} which overrides this
method
"""
pass
def _addWhatsThisText(self):
"""
What's This text for some of the widgets in this Property Manager.
"""
from ne1_ui.WhatsThisText_for_PropertyManagers import whatsThis_MovePropertyManager
whatsThis_MovePropertyManager(self)
def _addToolTipText(self):
"""
Tool Tip text for widgets in this Property Manager.
"""
from ne1_ui.ToolTipText_for_PropertyManagers import ToolTip_MovePropertyManager
ToolTip_MovePropertyManager(self)
class Ui_MovePropertyManager(Command_PropertyManager):
# The title that appears in the Property Manager header
title = "Move"
# The name of this Property Manager. This will be set to
# the name of the PM_Dialog object via setObjectName().
pmName = title
# The relative path to the PNG file that appears in the header
iconPath = "ui/actions/Properties Manager/Translate_Components.png"
# The title(s) that appear in the property manager header.
# (these are changed depending on the active group box)
translateTitle = "Translate"
rotateTitle = "Rotate"
# The full path to PNG file(s) that appears in the header.
translateIconPath = "ui/actions/Properties Manager/Translate_Components.png"
rotateIconPath = "ui/actions/Properties Manager/Rotate_Components.png"
def __init__(self, command):
_superclass.__init__(self, command)
self.showTopRowButtons(PM_DONE_BUTTON | PM_WHATS_THIS_BUTTON)
def _addGroupBoxes(self):
"""
Add groupboxes to the Property Manager dialog.
"""
self.translateGroupBox = PM_GroupBox( self,
title = "Translate",
connectTitleButton = False)
self.translateGroupBox.titleButton.setShortcut('T')
self._loadTranslateGroupBox(self.translateGroupBox)
self.rotateGroupBox = PM_GroupBox( self,
title = "Rotate",
connectTitleButton = False)
self.rotateGroupBox.titleButton.setShortcut('R')
self._loadRotateGroupBox(self.rotateGroupBox)
self.translateGroupBox.collapse()
self.rotateGroupBox.collapse()
# == Begin Translate Group Box =====================
def _loadTranslateGroupBox(self, inPmGroupBox):
"""
Load widgets in the Translate group box.
@param inPmGroupBox: The Translate group box in the PM
@type inPmGroupBox: L{PM_GroupBox}
"""
translateChoices = [ "Free Drag",
"By Delta XYZ",
"To XYZ Position" ]
self.translateComboBox = \
PM_ComboBox( inPmGroupBox,
label = '',
choices = translateChoices,
index = 0,
setAsDefault = False,
spanWidth = True )
self.freeDragTranslateGroupBox = PM_GroupBox( inPmGroupBox )
self._loadFreeDragTranslateGroupBox(self.freeDragTranslateGroupBox)
self.byDeltaGroupBox = PM_GroupBox( inPmGroupBox )
self._loadByDeltaGroupBox(self.byDeltaGroupBox)
self.toPositionGroupBox = PM_GroupBox( inPmGroupBox )
self._loadToPositionGroupBox(self.toPositionGroupBox)
self.updateTranslateGroupBoxes(0)
def _loadFreeDragTranslateGroupBox(self, inPmGroupBox):
"""
Load widgets in the Free Drag Translate group box, which is present
within the Translate groupbox.
@param inPmGroupBox: The Free Drag Translate group box in the Translate
group box.
@type inPmGroupBox: L{PM_GroupBox}
"""
# Button list to create a toolbutton row.
# Format:
# - buttonId,
# - buttonText ,
# - iconPath
# - tooltip
# - shortcut
# - column
BUTTON_LIST = [
( "QToolButton", 1, "MOVEDEFAULT",
"ui/actions/Properties Manager/Move_Free.png", "", "F", 0),
( "QToolButton", 2, "TRANSX",
"ui/actions/Properties Manager/TranslateX.png", "", "X", 1),
( "QToolButton", 3, "TRANSY",
"ui/actions/Properties Manager/TranslateY.png", "", "Y", 2),
( "QToolButton", 4, "TRANSZ",
"ui/actions/Properties Manager/TranslateZ.png", "", "Z", 3),
( "QToolButton", 5, "ROT_TRANS_ALONG_AXIS",
"ui/actions/Properties Manager/translate+rotate-A.png", "", \
"A", 4)
]
self.freeDragTranslateButtonGroup = \
PM_ToolButtonRow( inPmGroupBox,
title = "",
buttonList = BUTTON_LIST,
checkedId = 1,
setAsDefault = True,
)
self.transFreeButton =self.freeDragTranslateButtonGroup.getButtonById(1)
self.transXButton = self.freeDragTranslateButtonGroup.getButtonById(2)
self.transYButton = self.freeDragTranslateButtonGroup.getButtonById(3)
self.transZButton = self.freeDragTranslateButtonGroup.getButtonById(4)
self.transAlongAxisButton = \
self.freeDragTranslateButtonGroup.getButtonById(5)
self.moveFromToButton = PM_ToolButton(
inPmGroupBox,
text = "Translate from/to",
iconPath = "ui/actions/Properties Manager"\
"/Translate_Components.png",
spanWidth = True
)
self.moveFromToButton.setCheckable(True)
self.moveFromToButton.setAutoRaise(True)
self.moveFromToButton.setToolButtonStyle(
Qt.ToolButtonTextBesideIcon)
self.startCoordLineEdit = PM_LineEdit(
inPmGroupBox,
label = "ui/actions/Properties Manager"\
"/Move_Start_Point.png",
text = "Define 'from' and 'to' points",
setAsDefault = False,
)
self.startCoordLineEdit.setReadOnly(True)
self.startCoordLineEdit.setEnabled(False)
def _loadByDeltaGroupBox(self, inPmGroupBox):
"""
Load widgets in the translate By Delta group box, which is present
within the Translate groupbox.
@param inPmGroupBox: The Translate By Delta group box in the translate
group box.
@type inPmGroupBox: L{PM_GroupBox}
"""
self.moveDeltaXSpinBox = \
PM_DoubleSpinBox(
inPmGroupBox,
label = "ui/actions/Properties Manager/Delta_X.png",
value = 0.0,
setAsDefault = True,
minimum = -100.0,
maximum = 100.0,
singleStep = 1.0,
decimals = 3,
suffix = ' Angstroms',
spanWidth = False )
self.moveDeltaYSpinBox = \
PM_DoubleSpinBox(
inPmGroupBox,
label = "ui/actions/Properties Manager/Delta_Y.png",
value = 0.0,
setAsDefault = True,
minimum = -100.0,
maximum = 100.0,
singleStep = 1.0,
decimals = 3,
suffix = ' Angstroms',
spanWidth = False )
self.moveDeltaZSpinBox = \
PM_DoubleSpinBox(
inPmGroupBox,
label = "ui/actions/Properties Manager/Delta_Z.png",
value = 0.0,
setAsDefault = True,
minimum = -100.0,
maximum = 100.0,
singleStep = 1.0,
decimals = 3,
suffix = ' Angstroms',
spanWidth = False )
DELTA_BUTTONS = [
("QToolButton",1, "Delta Plus",
"ui/actions/Properties Manager/Move_Delta_Plus.png",
"", "+", 0 ),
( "QToolButton", 2, "Delta Minus",
"ui/actions/Properties Manager/Move_Delta_Minus.png",
"", "-", 1 )
]
self.translateDeltaButtonRow = \
PM_ToolButtonRow( inPmGroupBox,
title = "",
buttonList = DELTA_BUTTONS,
label = 'Translate:',
isAutoRaise = True,
isCheckable = False
)
self.transDeltaPlusButton = \
self.translateDeltaButtonRow.getButtonById(1)
self.transDeltaMinusButton = \
self.translateDeltaButtonRow.getButtonById(2)
def _loadToPositionGroupBox(self, inPmGroupBox):
"""
Load widgets in the Translate To a given Position group box, which is
present within the Translate groupbox.
@param inPmGroupBox: Translate To Position group box in the Translate
group box.
@type inPmGroupBox: L{PM_GroupBox}
"""
self.toPositionspinboxes = PM_CoordinateSpinBoxes(inPmGroupBox)
self.moveXSpinBox = self.toPositionspinboxes.xSpinBox
self.moveYSpinBox = self.toPositionspinboxes.ySpinBox
self.moveZSpinBox = self.toPositionspinboxes.zSpinBox
self.moveAbsoluteButton = \
PM_PushButton( inPmGroupBox,
label = "",
text = "Move Selection",
spanWidth = True )
# == Begin Rotate Group Box =====================
def _loadRotateGroupBox(self, inPmGroupBox):
"""
Load widgets in the Rotate group box,
@param inPmGroupBox: The Rotate GroupBox in the PM
@type inPmGroupBox: L{PM_GroupBox}
"""
rotateChoices = [ "Free Drag", "By Specified Angle"]
self.rotateComboBox = \
PM_ComboBox( inPmGroupBox,
label = '',
choices = rotateChoices,
index = 0,
setAsDefault = False,
spanWidth = True )
self.rotateAsUnitCB = \
PM_CheckBox( inPmGroupBox,
text = 'Rotate as a unit' ,
widgetColumn = 0,
state = Qt.Checked )
self.freeDragRotateGroupBox = PM_GroupBox( inPmGroupBox )
self._loadFreeDragRotateGroupBox(self.freeDragRotateGroupBox)
self.bySpecifiedAngleGroupBox = PM_GroupBox( inPmGroupBox )
self._loadBySpecifiedAngleGroupBox(self.bySpecifiedAngleGroupBox)
self.updateRotateGroupBoxes(0)
def _loadFreeDragRotateGroupBox(self, inPmGroupBox):
"""
Load widgets in the Free Drag Rotate group box, which is
present within the Rotate groupbox.
@param inPmGroupBox: The Free Drag Rotate group box in the Rotate
group box.
@type inPmGroupBox: L{PM_GroupBox}
"""
# Button list to create a toolbutton row.
# Format:
# - buttonId,
# - buttonText ,
# - iconPath
# - tooltip
# - shortcut
# - column
BUTTON_LIST = [
( "QToolButton", 1, "ROTATEDEFAULT",
"ui/actions/Properties Manager/Rotate_Free.png", "", "F", 0 ),
( "QToolButton", 2, "ROTATEX",
"ui/actions/Properties Manager/RotateX.png", "", "X", 1 ),
( "QToolButton", 3, "ROTATEY",
"ui/actions/Properties Manager/RotateY.png", "", "Y", 2 ),
( "QToolButton", 4, "ROTATEZ",
"ui/actions/Properties Manager/RotateZ.png", "", "Z", 3 ),
( "QToolButton", 5, "ROT_TRANS_ALONG_AXIS",
"ui/actions/Properties Manager/translate+rotate-A.png", "", \
"A", 4 )
]
self.freeDragRotateButtonGroup = \
PM_ToolButtonRow( inPmGroupBox,
title = "",
buttonList = BUTTON_LIST,
spanWidth = True,
checkedId = 1,
setAsDefault = True,
)
self.rotateFreeButton = self.freeDragRotateButtonGroup.getButtonById(1)
self.rotateXButton = self.freeDragRotateButtonGroup.getButtonById(2)
self.rotateYButton = self.freeDragRotateButtonGroup.getButtonById(3)
self.rotateZButton = self.freeDragRotateButtonGroup.getButtonById(4)
self.rotAlongAxisButton = \
self.freeDragRotateButtonGroup.getButtonById(5)
inPmGroupBox.setStyleSheet(
self.freeDragRotateButtonGroup._getStyleSheet())
X_ROW_LABELS = [("QLabel", "Delta Theta X:", 0),
("QLabel", "", 1),
("QLabel", "0.00", 2),
("QLabel", "Degrees", 3)]
Y_ROW_LABELS = [("QLabel", "Delta Theta Y:", 0),
("QLabel", "", 1),
("QLabel", "0.00", 2),
("QLabel", "Degrees", 3)]
Z_ROW_LABELS = [("QLabel", "Delta Theta Z:", 0),
("QLabel", "", 1),
("QLabel", "0.00", 2),
("QLabel", "Degrees", 3)]
self.rotateXLabelRow = PM_LabelRow( inPmGroupBox,
title = "",
labelList = X_ROW_LABELS )
self.deltaThetaX_lbl = self.rotateXLabelRow.labels[2]
self.rotateYLabelRow = PM_LabelRow( inPmGroupBox,
title = "",
labelList = Y_ROW_LABELS )
self.deltaThetaY_lbl = self.rotateYLabelRow.labels[2]
self.rotateZLabelRow = PM_LabelRow( inPmGroupBox,
title = "",
labelList = Z_ROW_LABELS )
self.deltaThetaZ_lbl = self.rotateZLabelRow.labels[2]
self.rotateAboutPointButton = PM_ToolButton(
inPmGroupBox,
text = "Rotate selection about a point",
iconPath = "ui/actions/Properties Manager"\
"/Rotate_Components.png",
spanWidth = True
)
self.rotateAboutPointButton.setCheckable(True)
self.rotateAboutPointButton.setAutoRaise(True)
self.rotateAboutPointButton.setToolButtonStyle(
Qt.ToolButtonTextBesideIcon)
self.rotateStartCoordLineEdit = PM_LineEdit(
inPmGroupBox,
label = "ui/actions/Properties Manager"\
"/Move_Start_Point.png",
text = "Define 3 points",
setAsDefault = False,
)
self.rotateStartCoordLineEdit.setReadOnly(True)
self.rotateStartCoordLineEdit.setEnabled(False)
def _loadBySpecifiedAngleGroupBox(self, inPmGroupBox):
"""
Load widgets in the Rotate By Specified Angle group box, which is
present within the Rotate groupbox.
@param inPmGroupBox: Rotate By Specified Angle group box in the Rotate
group box.
@type inPmGroupBox: L{PM_GroupBox}
"""
# Button list to create a toolbutton row.
# Format:
# - buttonId,
# - buttonText ,
# - iconPath
# - tooltip
# - shortcut
# - column
BUTTON_LIST = [
( "QToolButton", 1, "ROTATEX",
"ui/actions/Properties Manager/RotateX.png",
"Rotate about X axis", "X", 0 ),
( "QToolButton", 2, "ROTATEY",
"ui/actions/Properties Manager/RotateY.png",
"Rotate about Y axis", "Y", 1 ),
( "QToolButton", 3, "ROTATEZ",
"ui/actions/Properties Manager/RotateZ.png",
"Rotate about Z axis","Z", 2 ),
]
self.rotateAroundAxisButtonRow = \
PM_ToolButtonRow( inPmGroupBox,
title = "",
buttonList = BUTTON_LIST,
alignment = 'Right',
label = 'Rotate Around:'
)
self.rotXaxisButton = \
self.rotateAroundAxisButtonRow.getButtonById(1)
self.rotYaxisButton = \
self.rotateAroundAxisButtonRow.getButtonById(2)
self.rotZaxisButton = \
self.rotateAroundAxisButtonRow.getButtonById(3)
self.rotateThetaSpinBox = \
PM_DoubleSpinBox(inPmGroupBox,
label = "Rotate By:",
value = 0.0,
setAsDefault = True,
minimum = 0,
maximum = 360.0,
singleStep = 1.0,
decimals = 2,
suffix = ' Degrees')
THETA_BUTTONS = [
( "QToolButton", 1, "Theta Plus",
"ui/actions/Properties Manager/Move_Theta_Plus.png", "", "+", 0 ),
( "QToolButton", 2, "Theta Minus",
"ui/actions/Properties Manager/Move_Theta_Minus.png", "", "-", 1 )
]
self.rotateThetaButtonRow = \
PM_ToolButtonRow( inPmGroupBox,
title = "",
buttonList = THETA_BUTTONS,
label = 'Direction:',
isAutoRaise = True,
isCheckable = False
)
self.rotateThetaPlusButton = self.rotateThetaButtonRow.getButtonById(1)
self.rotateThetaMinusButton = self.rotateThetaButtonRow.getButtonById(2)
# == End Rotate Group Box =====================
# == Slots for Translate group box
def _hideAllTranslateGroupBoxes(self):
"""
Hides all Translate group boxes.
"""
self.toPositionGroupBox.hide()
self.byDeltaGroupBox.hide()
self.freeDragTranslateGroupBox.hide()
def updateTranslateGroupBoxes(self, id):
"""
Update the translate group boxes displayed based on the translate
option selected.
@param id: Integer value corresponding to the combobox item in the
Translate group box.
@type id: int
"""
self._hideAllTranslateGroupBoxes()
if id is 0:
self.freeDragTranslateGroupBox.show()
if id is 1:
self.byDeltaGroupBox.show()
if id is 2:
self.toPositionGroupBox.show()
self.updateMessage()
def changeMoveOption(self, button):
"""
Subclasses should reimplement this method.
@param button: QToolButton that decides the type of translate operation
to be set.
@type button: QToolButton
L{http://doc.trolltech.com/4.2/qtoolbutton.html}
@see: B{MovePropertyManager.changeMoveOption} which overrides this
method
"""
pass
# == Slots for Rotate group box
def updateRotateGroupBoxes(self, id):
"""
Update the translate group boxes displayed based on the translate
option selected.
@param id: Integer value corresponding to the combobox item in the
Rotate group box.
@type id: int
"""
if id is 0:
self.bySpecifiedAngleGroupBox.hide()
self.freeDragRotateGroupBox.show()
if id is 1:
self.freeDragRotateGroupBox.hide()
self.bySpecifiedAngleGroupBox.show()
self.updateMessage()
def changeRotateOption(self, button):
"""
Subclasses should reimplement this method.
@param button: QToolButton that decides the type of rotate operation
to be set.
@type button: QToolButton
L{http://doc.trolltech.com/4.2/qtoolbutton.html}
@see: B{MovePropertyManage.changeRotateOption} which overrides this
method
"""
pass
def _addWhatsThisText(self):
"""
What's This text for some of the widgets in this Property Manager.
"""
from ne1_ui.WhatsThisText_for_PropertyManagers import whatsThis_MovePropertyManager
whatsThis_MovePropertyManager(self)
def _addToolTipText(self):
"""
Tool Tip text for widgets in this Property Manager.
"""
from ne1_ui.ToolTipText_for_PropertyManagers import ToolTip_MovePropertyManager
ToolTip_MovePropertyManager(self)
class Ui_BuildAtomsPropertyManager(Command_PropertyManager):
"""
The Ui_BuildAtomsPropertyManager class defines UI elements for the Property
Manager of the B{Build Atoms mode}.
@ivar title: The title that appears in the property manager header.
@type title: str
@ivar pmName: The name of this property manager. This is used to set
the name of the PM_Dialog object via setObjectName().
@type name: str
@ivar iconPath: The relative path to the PNG file that contains a
22 x 22 icon image that appears in the PM header.
@type iconPath: str
"""
# The title that appears in the Property Manager header
title = "Build Atoms"
# The name of this Property Manager. This will be set to
# the name of the PM_Dialog object via setObjectName().
pmName = title
# The relative path to the PNG file that appears in the header
iconPath = "ui/actions/Tools/Build Structures/BuildAtoms.png"
def __init__(self, command):
"""
Constructor for the B{Build Atoms} property manager class that defines
its UI.
@param command: The parent mode where this Property Manager is used
@type command: L{depositMode}
"""
self.previewGroupBox = None
self.regularElementChooser = None
self.PAM5Chooser = None
self.PAM3Chooser = None
self.elementChooser = None
self.advancedOptionsGroupBox = None
self.bondToolsGroupBox = None
self.selectionFilterCheckBox = None
self.filterlistLE = None
self.selectedAtomInfoLabel = None
#Initialize the following to None. (subclasses may not define this)
#Make sure you initialize it before adding groupboxes!
self.selectedAtomPosGroupBox = None
self.showSelectedAtomInfoCheckBox = None
_superclass.__init__(self, command)
self.showTopRowButtons(PM_DONE_BUTTON | PM_WHATS_THIS_BUTTON)
msg = ''
self.MessageGroupBox.insertHtmlMessage(msg, setAsDefault=False)
def _addGroupBoxes(self):
"""
Add various group boxes to the Build Atoms Property manager.
"""
self._addPreviewGroupBox()
self._addAtomChooserGroupBox()
self._addBondToolsGroupBox()
#@@@TODO HIDE the bonds tool groupbox initially as the
#by default, the atoms tool is active when BuildAtoms command is
#finist invoked.
self.bondToolsGroupBox.hide()
self._addSelectionOptionsGroupBox()
self._addAdvancedOptionsGroupBox()
def _addPreviewGroupBox(self):
"""
Adde the preview groupbox that shows the element selected in the
element chooser.
"""
self.previewGroupBox = PM_PreviewGroupBox(self, glpane=self.o)
def _addAtomChooserGroupBox(self):
"""
Add the Atom Chooser groupbox. This groupbox displays one of the
following three groupboxes depending on the choice selected in the
combobox:
a) Periodic Table Elements L{self.regularElementChooser}
b) PAM5 Atoms L{self.PAM5Chooser}
c) PAM3 Atoms L{self.PAM3Chooser}
@see: L{self.__updateAtomChooserGroupBoxes}
"""
self.atomChooserGroupBox = \
PM_GroupBox(self, title = "Atom Chooser")
self._loadAtomChooserGroupBox(self.atomChooserGroupBox)
self._updateAtomChooserGroupBoxes(currentIndex=0)
def _addElementChooserGroupBox(self, inPmGroupBox):
"""
Add the 'Element Chooser' groupbox. (present within the
Atom Chooser Groupbox)
"""
if not self.previewGroupBox:
return
elementViewer = self.previewGroupBox.elementViewer
self.regularElementChooser = \
PM_ElementChooser( inPmGroupBox,
parentPropMgr = self,
elementViewer = elementViewer)
def _add_PAM5_AtomChooserGroupBox(self, inPmGroupBox):
"""
Add the 'PAM5 Atom Chooser' groupbox (present within the
Atom Chooser Groupbox)
"""
if not self.previewGroupBox:
return
elementViewer = self.previewGroupBox.elementViewer
self.PAM5Chooser = \
PM_PAM5_AtomChooser( inPmGroupBox,
parentPropMgr = self,
elementViewer = elementViewer)
def _add_PAM3_AtomChooserGroupBox(self, inPmGroupBox):
"""
Add the 'PAM3 Atom Chooser' groupbox (present within the
Atom Chooser Groupbox)
"""
if not self.previewGroupBox:
return
elementViewer = self.previewGroupBox.elementViewer
self.PAM3Chooser = \
PM_PAM3_AtomChooser( inPmGroupBox,
parentPropMgr = self,
elementViewer = elementViewer)
def _hideAllAtomChooserGroupBoxes(self):
"""
Hides all Atom Chooser group boxes.
"""
if self.regularElementChooser:
self.regularElementChooser.hide()
if self.PAM5Chooser:
self.PAM5Chooser.hide()
if self.PAM3Chooser:
self.PAM3Chooser.hide()
def _addBondToolsGroupBox(self):
"""
Add the 'Bond Tools' groupbox.
"""
self.bondToolsGroupBox = \
PM_GroupBox( self, title = "Bond Tools")
self._loadBondToolsGroupBox(self.bondToolsGroupBox)
def _addSelectionOptionsGroupBox(self):
"""
Add 'Selection Options' groupbox
"""
self.selectionOptionsGroupBox = \
PM_GroupBox( self, title = "Selection Options" )
self._loadSelectionOptionsGroupBox(self.selectionOptionsGroupBox)
def _loadAtomChooserGroupBox(self, inPmGroupBox):
"""
Load the widgets inside the Atom Chooser groupbox.
@param inPmGroupBox: The Atom Chooser box in the PM
@type inPmGroupBox: L{PM_GroupBox}
"""
atomChooserChoices = [
"Periodic Table Elements", "PAM5 Atoms", "PAM3 Atoms"
]
self.atomChooserComboBox = \
PM_ComboBox( inPmGroupBox,
label = '',
choices = atomChooserChoices,
index = 0,
setAsDefault = False,
spanWidth = True )
#Following fixes bug 2550
self.atomChooserComboBox.setFocusPolicy(Qt.NoFocus)
self._addElementChooserGroupBox(inPmGroupBox)
self._add_PAM5_AtomChooserGroupBox(inPmGroupBox)
self._add_PAM3_AtomChooserGroupBox(inPmGroupBox)
def _loadSelectionOptionsGroupBox(self, inPmGroupBox):
"""
Load widgets in the Selection Options group box.
@param inPmGroupBox: The Selection Options box in the PM
@type inPmGroupBox: L{PM_GroupBox}
"""
self.selectionFilterCheckBox = \
PM_CheckBox( inPmGroupBox,
text = "Enable atom selection filter",
widgetColumn = 0,
state = Qt.Unchecked )
self.selectionFilterCheckBox.setDefaultValue(False)
self.filterlistLE = PM_LineEdit(inPmGroupBox,
label="",
text="",
setAsDefault=False,
spanWidth=True)
self.filterlistLE.setReadOnly(True)
if self.selectionFilterCheckBox.isChecked():
self.filterlistLE.setEnabled(True)
else:
self.filterlistLE.setEnabled(False)
self.showSelectedAtomInfoCheckBox = \
PM_CheckBox(
inPmGroupBox,
text = "Show Selected Atom Info",
widgetColumn = 0,
state = Qt.Unchecked)
self.selectedAtomPosGroupBox = \
PM_GroupBox( inPmGroupBox, title = "")
self._loadSelectedAtomPosGroupBox(self.selectedAtomPosGroupBox)
self.toggle_selectedAtomPosGroupBox(show=0)
self.enable_or_disable_selectedAtomPosGroupBox(bool_enable=False)
self.reshapeSelectionCheckBox = \
PM_CheckBox( inPmGroupBox,
text = 'Dragging reshapes selection',
widgetColumn = 0,
state = Qt.Unchecked )
connect_checkbox_with_boolean_pref(self.reshapeSelectionCheckBox,
reshapeAtomsSelection_prefs_key)
env.prefs[reshapeAtomsSelection_prefs_key] = False
self.waterCheckBox = \
PM_CheckBox( inPmGroupBox,
text = "Z depth filter (water surface)",
widgetColumn = 0,
state = Qt.Unchecked )
def _loadSelectedAtomPosGroupBox(self, inPmGroupBox):
"""
Load the selected Atoms position groupbox It is a sub-gropbox of
L{self.selectionOptionsGroupBox)
@param inPmGroupBox: 'The Selected Atom Position Groupbox'
@type inPmGroupBox: L{PM_GroupBox}
"""
self.selectedAtomLineEdit = PM_LineEdit(inPmGroupBox,
label="Selected Atom:",
text="",
setAsDefault=False,
spanWidth=False)
self.selectedAtomLineEdit.setReadOnly(True)
self.selectedAtomLineEdit.setEnabled(False)
self.coordinateSpinboxes = PM_CoordinateSpinBoxes(inPmGroupBox)
# User input to specify x-coordinate
self.xCoordOfSelectedAtom = self.coordinateSpinboxes.xSpinBox
# User input to specify y-coordinate
self.yCoordOfSelectedAtom = self.coordinateSpinboxes.ySpinBox
# User input to specify z-coordinate
self.zCoordOfSelectedAtom = self.coordinateSpinboxes.zSpinBox
def _addAdvancedOptionsGroupBox(self):
"""
Add 'Advanced Options' groupbox
"""
self.advancedOptionsGroupBox = \
PM_GroupBox( self, title = "Advanced Options" )
self._loadAdvancedOptionsGroupBox(self.advancedOptionsGroupBox)
def _loadAdvancedOptionsGroupBox(self, inPmGroupBox):
"""
Load widgets in the Advanced Options group box.
@param inPmGroupBox: The Advanced Options box in the PM
@type inPmGroupBox: L{PM_GroupBox}
"""
self.autoBondCheckBox = \
PM_CheckBox( inPmGroupBox,
text = 'Auto bond',
widgetColumn = 0,
state = Qt.Checked )
self.highlightingCheckBox = \
PM_CheckBox( inPmGroupBox,
text = "Hover highlighting",
widgetColumn = 0,
state = Qt.Checked )
def _loadBondToolsGroupBox(self, inPmGroupBox):
"""
Load widgets in the Bond Tools group box.
@param inPmGroupBox: The Bond Tools box in the PM
@type inPmGroupBox: L{PM_GroupBox}
"""
# Button list to create a toolbutton row.
# Format:
# - buttonId,
# - buttonText ,
# - iconPath
# - tooltip
# - shortcut
# - column
BOND_TOOL_BUTTONS = \
[ ( "QToolButton", 0, "SINGLE", "", "", None, 0),
( "QToolButton", 1, "DOUBLE", "", "", None, 1),
( "QToolButton", 2, "TRIPLE", "", "", None, 2),
( "QToolButton", 3, "AROMATIC", "", "", None, 3),
( "QToolButton", 4, "GRAPHITIC", "", "", None, 4),
( "QToolButton", 5, "CUTBONDS", "", "", None, 5)
]
self.bondToolButtonRow = \
PM_ToolButtonRow(
inPmGroupBox,
title = "",
buttonList = BOND_TOOL_BUTTONS,
checkedId = None,
setAsDefault = True )
def _addWhatsThisText(self):
"""
"What's This" text for widgets in this Property Manager.
"""
from ne1_ui.WhatsThisText_for_PropertyManagers import whatsThis_BuildAtomsPropertyManager
whatsThis_BuildAtomsPropertyManager(self)
def _addToolTipText(self):
"""
Tool Tip text for widgets in this Property Manager.
"""
from ne1_ui.ToolTipText_for_PropertyManagers import ToolTip_BuildAtomsPropertyManager
ToolTip_BuildAtomsPropertyManager(self)
def toggle_selectedAtomPosGroupBox(self, show=0):
"""
Show or hide L{self.selectedAtomPosGroupBox} depending on the state of
the checkbox (L{self.showSelectedAtomInfoCheckBox})
@param show: Flag that shows or hides the groupbox (can have values
0 or 1
@type show: int
"""
if show:
self.selectedAtomPosGroupBox.show()
else:
self.selectedAtomPosGroupBox.hide()
def enable_or_disable_selectedAtomPosGroupBox(self, bool_enable=False):
"""
Enable or disable Selected AtomPosGroupBox present within
'selection options' and also the checkbox that shows or hide this
groupbox. These two widgets are enabled when only a single atom is
selected from the 3D workspace.
@param bool_enable: Flag that enables or disables widgets
@type bool_enable: boolean
"""
if self.showSelectedAtomInfoCheckBox:
self.showSelectedAtomInfoCheckBox.setEnabled(bool_enable)
if self.selectedAtomPosGroupBox:
self.selectedAtomPosGroupBox.setEnabled(bool_enable)
def _updateAtomChooserGroupBoxes(self, currentIndex):
"""
Updates the Atom Chooser Groupbox. It displays one of the
following three groupboxes depending on the choice selected in the
combobox:
a) Periodic Table Elements L{self.regularElementChooser}
b) PAM5 Atoms L{self.PAM5Chooser}
c) PAM3 Atoms L{self.PAM3Chooser}
It also sets self.elementChooser to the current active Atom chooser
and updates the display accordingly in the Preview groupbox.
"""
self._hideAllAtomChooserGroupBoxes()
if currentIndex is 0:
self.elementChooser = self.regularElementChooser
self.regularElementChooser.show()
if currentIndex is 1:
self.elementChooser = self.PAM5Chooser
self.PAM5Chooser.show()
if currentIndex is 2:
self.elementChooser = self.PAM3Chooser
self.PAM3Chooser.show()
if self.elementChooser:
self.elementChooser.updateElementViewer()
self.updateMessage()
def updateMessage(self):
"""
Update the Message groupbox with informative message.
Subclasses should override this.
"""
pass
class Ui_BuildAtomsPropertyManager(Command_PropertyManager):
"""
The Ui_BuildAtomsPropertyManager class defines UI elements for the Property
Manager of the B{Build Atoms mode}.
@ivar title: The title that appears in the property manager header.
@type title: str
@ivar pmName: The name of this property manager. This is used to set
the name of the PM_Dialog object via setObjectName().
@type name: str
@ivar iconPath: The relative path to the PNG file that contains a
22 x 22 icon image that appears in the PM header.
@type iconPath: str
"""
# The title that appears in the Property Manager header
title = "Build Atoms"
# The name of this Property Manager. This will be set to
# the name of the PM_Dialog object via setObjectName().
pmName = title
# The relative path to the PNG file that appears in the header
iconPath = "ui/actions/Tools/Build Structures/BuildAtoms.png"
def __init__(self, command):
"""
Constructor for the B{Build Atoms} property manager class that defines
its UI.
@param command: The parent mode where this Property Manager is used
@type command: L{depositMode}
"""
self.previewGroupBox = None
self.regularElementChooser = None
self.PAM5Chooser = None
self.PAM3Chooser = None
self.elementChooser = None
self.advancedOptionsGroupBox = None
self.bondToolsGroupBox = None
self.selectionFilterCheckBox = None
self.filterlistLE = None
self.selectedAtomInfoLabel = None
#Initialize the following to None. (subclasses may not define this)
#Make sure you initialize it before adding groupboxes!
self.selectedAtomPosGroupBox = None
self.showSelectedAtomInfoCheckBox = None
_superclass.__init__(self, command)
self.showTopRowButtons(PM_DONE_BUTTON | PM_WHATS_THIS_BUTTON)
msg = ''
self.MessageGroupBox.insertHtmlMessage(msg, setAsDefault=False)
def _addGroupBoxes(self):
"""
Add various group boxes to the Build Atoms Property manager.
"""
self._addPreviewGroupBox()
self._addAtomChooserGroupBox()
self._addBondToolsGroupBox()
#@@@TODO HIDE the bonds tool groupbox initially as the
#by default, the atoms tool is active when BuildAtoms command is
#finist invoked.
self.bondToolsGroupBox.hide()
self._addSelectionOptionsGroupBox()
self._addAdvancedOptionsGroupBox()
def _addPreviewGroupBox(self):
"""
Adde the preview groupbox that shows the element selected in the
element chooser.
"""
self.previewGroupBox = PM_PreviewGroupBox( self, glpane = self.o )
def _addAtomChooserGroupBox(self):
"""
Add the Atom Chooser groupbox. This groupbox displays one of the
following three groupboxes depending on the choice selected in the
combobox:
a) Periodic Table Elements L{self.regularElementChooser}
b) PAM5 Atoms L{self.PAM5Chooser}
c) PAM3 Atoms L{self.PAM3Chooser}
@see: L{self.__updateAtomChooserGroupBoxes}
"""
self.atomChooserGroupBox = \
PM_GroupBox(self, title = "Atom Chooser")
self._loadAtomChooserGroupBox(self.atomChooserGroupBox)
self._updateAtomChooserGroupBoxes(currentIndex = 0)
def _addElementChooserGroupBox(self, inPmGroupBox):
"""
Add the 'Element Chooser' groupbox. (present within the
Atom Chooser Groupbox)
"""
if not self.previewGroupBox:
return
elementViewer = self.previewGroupBox.elementViewer
self.regularElementChooser = \
PM_ElementChooser( inPmGroupBox,
parentPropMgr = self,
elementViewer = elementViewer)
def _add_PAM5_AtomChooserGroupBox(self, inPmGroupBox):
"""
Add the 'PAM5 Atom Chooser' groupbox (present within the
Atom Chooser Groupbox)
"""
if not self.previewGroupBox:
return
elementViewer = self.previewGroupBox.elementViewer
self.PAM5Chooser = \
PM_PAM5_AtomChooser( inPmGroupBox,
parentPropMgr = self,
elementViewer = elementViewer)
def _add_PAM3_AtomChooserGroupBox(self, inPmGroupBox):
"""
Add the 'PAM3 Atom Chooser' groupbox (present within the
Atom Chooser Groupbox)
"""
if not self.previewGroupBox:
return
elementViewer = self.previewGroupBox.elementViewer
self.PAM3Chooser = \
PM_PAM3_AtomChooser( inPmGroupBox,
parentPropMgr = self,
elementViewer = elementViewer)
def _hideAllAtomChooserGroupBoxes(self):
"""
Hides all Atom Chooser group boxes.
"""
if self.regularElementChooser:
self.regularElementChooser.hide()
if self.PAM5Chooser:
self.PAM5Chooser.hide()
if self.PAM3Chooser:
self.PAM3Chooser.hide()
def _addBondToolsGroupBox(self):
"""
Add the 'Bond Tools' groupbox.
"""
self.bondToolsGroupBox = \
PM_GroupBox( self, title = "Bond Tools")
self._loadBondToolsGroupBox(self.bondToolsGroupBox)
def _addSelectionOptionsGroupBox(self):
"""
Add 'Selection Options' groupbox
"""
self.selectionOptionsGroupBox = \
PM_GroupBox( self, title = "Selection Options" )
self._loadSelectionOptionsGroupBox(self.selectionOptionsGroupBox)
def _loadAtomChooserGroupBox(self, inPmGroupBox):
"""
Load the widgets inside the Atom Chooser groupbox.
@param inPmGroupBox: The Atom Chooser box in the PM
@type inPmGroupBox: L{PM_GroupBox}
"""
atomChooserChoices = [ "Periodic Table Elements",
"PAM5 Atoms",
"PAM3 Atoms" ]
self.atomChooserComboBox = \
PM_ComboBox( inPmGroupBox,
label = '',
choices = atomChooserChoices,
index = 0,
setAsDefault = False,
spanWidth = True )
#Following fixes bug 2550
self.atomChooserComboBox.setFocusPolicy(Qt.NoFocus)
self._addElementChooserGroupBox(inPmGroupBox)
self._add_PAM5_AtomChooserGroupBox(inPmGroupBox)
self._add_PAM3_AtomChooserGroupBox(inPmGroupBox)
def _loadSelectionOptionsGroupBox(self, inPmGroupBox):
"""
Load widgets in the Selection Options group box.
@param inPmGroupBox: The Selection Options box in the PM
@type inPmGroupBox: L{PM_GroupBox}
"""
self.selectionFilterCheckBox = \
PM_CheckBox( inPmGroupBox,
text = "Enable atom selection filter",
widgetColumn = 0,
state = Qt.Unchecked )
self.selectionFilterCheckBox.setDefaultValue(False)
self.filterlistLE = PM_LineEdit( inPmGroupBox,
label = "",
text = "",
setAsDefault = False,
spanWidth = True )
self.filterlistLE.setReadOnly(True)
if self.selectionFilterCheckBox.isChecked():
self.filterlistLE.setEnabled(True)
else:
self.filterlistLE.setEnabled(False)
self.showSelectedAtomInfoCheckBox = \
PM_CheckBox(
inPmGroupBox,
text = "Show Selected Atom Info",
widgetColumn = 0,
state = Qt.Unchecked)
self.selectedAtomPosGroupBox = \
PM_GroupBox( inPmGroupBox, title = "")
self._loadSelectedAtomPosGroupBox(self.selectedAtomPosGroupBox)
self.toggle_selectedAtomPosGroupBox(show = 0)
self.enable_or_disable_selectedAtomPosGroupBox( bool_enable = False)
self.reshapeSelectionCheckBox = \
PM_CheckBox( inPmGroupBox,
text = 'Dragging reshapes selection',
widgetColumn = 0,
state = Qt.Unchecked )
connect_checkbox_with_boolean_pref( self.reshapeSelectionCheckBox,
reshapeAtomsSelection_prefs_key )
env.prefs[reshapeAtomsSelection_prefs_key] = False
self.waterCheckBox = \
PM_CheckBox( inPmGroupBox,
text = "Z depth filter (water surface)",
widgetColumn = 0,
state = Qt.Unchecked )
def _loadSelectedAtomPosGroupBox(self, inPmGroupBox):
"""
Load the selected Atoms position groupbox It is a sub-gropbox of
L{self.selectionOptionsGroupBox)
@param inPmGroupBox: 'The Selected Atom Position Groupbox'
@type inPmGroupBox: L{PM_GroupBox}
"""
self.selectedAtomLineEdit = PM_LineEdit( inPmGroupBox,
label = "Selected Atom:",
text = "",
setAsDefault = False,
spanWidth = False )
self.selectedAtomLineEdit.setReadOnly(True)
self.selectedAtomLineEdit.setEnabled(False)
self.coordinateSpinboxes = PM_CoordinateSpinBoxes(inPmGroupBox)
# User input to specify x-coordinate
self.xCoordOfSelectedAtom = self.coordinateSpinboxes.xSpinBox
# User input to specify y-coordinate
self.yCoordOfSelectedAtom = self.coordinateSpinboxes.ySpinBox
# User input to specify z-coordinate
self.zCoordOfSelectedAtom = self.coordinateSpinboxes.zSpinBox
def _addAdvancedOptionsGroupBox(self):
"""
Add 'Advanced Options' groupbox
"""
self.advancedOptionsGroupBox = \
PM_GroupBox( self, title = "Advanced Options" )
self._loadAdvancedOptionsGroupBox(self.advancedOptionsGroupBox)
def _loadAdvancedOptionsGroupBox(self, inPmGroupBox):
"""
Load widgets in the Advanced Options group box.
@param inPmGroupBox: The Advanced Options box in the PM
@type inPmGroupBox: L{PM_GroupBox}
"""
self.autoBondCheckBox = \
PM_CheckBox( inPmGroupBox,
text = 'Auto bond',
widgetColumn = 0,
state = Qt.Checked )
self.highlightingCheckBox = \
PM_CheckBox( inPmGroupBox,
text = "Hover highlighting",
widgetColumn = 0,
state = Qt.Checked )
def _loadBondToolsGroupBox(self, inPmGroupBox):
"""
Load widgets in the Bond Tools group box.
@param inPmGroupBox: The Bond Tools box in the PM
@type inPmGroupBox: L{PM_GroupBox}
"""
# Button list to create a toolbutton row.
# Format:
# - buttonId,
# - buttonText ,
# - iconPath
# - tooltip
# - shortcut
# - column
BOND_TOOL_BUTTONS = \
[ ( "QToolButton", 0, "SINGLE", "", "", None, 0),
( "QToolButton", 1, "DOUBLE", "", "", None, 1),
( "QToolButton", 2, "TRIPLE", "", "", None, 2),
( "QToolButton", 3, "AROMATIC", "", "", None, 3),
( "QToolButton", 4, "GRAPHITIC", "", "", None, 4),
( "QToolButton", 5, "CUTBONDS", "", "", None, 5)
]
self.bondToolButtonRow = \
PM_ToolButtonRow(
inPmGroupBox,
title = "",
buttonList = BOND_TOOL_BUTTONS,
checkedId = None,
setAsDefault = True )
def _addWhatsThisText(self):
"""
"What's This" text for widgets in this Property Manager.
"""
from ne1_ui.WhatsThisText_for_PropertyManagers import whatsThis_BuildAtomsPropertyManager
whatsThis_BuildAtomsPropertyManager(self)
def _addToolTipText(self):
"""
Tool Tip text for widgets in this Property Manager.
"""
from ne1_ui.ToolTipText_for_PropertyManagers import ToolTip_BuildAtomsPropertyManager
ToolTip_BuildAtomsPropertyManager(self)
def toggle_selectedAtomPosGroupBox(self, show = 0):
"""
Show or hide L{self.selectedAtomPosGroupBox} depending on the state of
the checkbox (L{self.showSelectedAtomInfoCheckBox})
@param show: Flag that shows or hides the groupbox (can have values
0 or 1
@type show: int
"""
if show:
self.selectedAtomPosGroupBox.show()
else:
self.selectedAtomPosGroupBox.hide()
def enable_or_disable_selectedAtomPosGroupBox(self, bool_enable = False):
"""
Enable or disable Selected AtomPosGroupBox present within
'selection options' and also the checkbox that shows or hide this
groupbox. These two widgets are enabled when only a single atom is
selected from the 3D workspace.
@param bool_enable: Flag that enables or disables widgets
@type bool_enable: boolean
"""
if self.showSelectedAtomInfoCheckBox:
self.showSelectedAtomInfoCheckBox.setEnabled(bool_enable)
if self.selectedAtomPosGroupBox:
self.selectedAtomPosGroupBox.setEnabled(bool_enable)
def _updateAtomChooserGroupBoxes(self, currentIndex):
"""
Updates the Atom Chooser Groupbox. It displays one of the
following three groupboxes depending on the choice selected in the
combobox:
a) Periodic Table Elements L{self.regularElementChooser}
b) PAM5 Atoms L{self.PAM5Chooser}
c) PAM3 Atoms L{self.PAM3Chooser}
It also sets self.elementChooser to the current active Atom chooser
and updates the display accordingly in the Preview groupbox.
"""
self._hideAllAtomChooserGroupBoxes()
if currentIndex is 0:
self.elementChooser = self.regularElementChooser
self.regularElementChooser.show()
if currentIndex is 1:
self.elementChooser = self.PAM5Chooser
self.PAM5Chooser.show()
if currentIndex is 2:
self.elementChooser = self.PAM3Chooser
self.PAM3Chooser.show()
if self.elementChooser:
self.elementChooser.updateElementViewer()
self.updateMessage()
def updateMessage(self):
"""
Update the Message groupbox with informative message.
Subclasses should override this.
"""
pass
