class DebugDevice(QDialog): def __init__(self, parent=None): QDialog.__init__(self, parent) self._layout = QVBoxLayout(self) self.setLayout(self._layout) self.log = QPlainTextEdit(self) self._layout.addWidget(self.log) self.log.setPlainText(_('Getting debug information')+'...') self.copy = QPushButton(_('Copy to &clipboard')) self.copy.setDefault(True) self.setWindowTitle(_('Debug device detection')) self.setWindowIcon(QIcon(I('debug.png'))) self.copy.clicked.connect(self.copy_to_clipboard) self.ok = QPushButton('&OK') self.ok.setAutoDefault(False) self.ok.clicked.connect(self.accept) self.bbox = QDialogButtonBox(self) self.bbox.addButton(self.copy, QDialogButtonBox.ActionRole) self.bbox.addButton(self.ok, QDialogButtonBox.AcceptRole) self._layout.addWidget(self.bbox) self.resize(750, 500) self.bbox.setEnabled(False) QTimer.singleShot(1000, self.debug) def debug(self): try: from calibre.devices import debug raw = debug() self.log.setPlainText(raw) finally: self.bbox.setEnabled(True) def copy_to_clipboard(self): QApplication.clipboard().setText(self.log.toPlainText())
class DebugDevice(QDialog): def __init__(self, parent=None): QDialog.__init__(self, parent) self._layout = QVBoxLayout(self) self.setLayout(self._layout) self.log = QPlainTextEdit(self) self._layout.addWidget(self.log) self.log.setPlainText(_('Getting debug information') + '...') self.copy = QPushButton(_('Copy to &clipboard')) self.copy.setDefault(True) self.setWindowTitle(_('Debug device detection')) self.setWindowIcon(QIcon(I('debug.png'))) self.copy.clicked.connect(self.copy_to_clipboard) self.ok = QPushButton('&OK') self.ok.setAutoDefault(False) self.ok.clicked.connect(self.accept) self.bbox = QDialogButtonBox(self) self.bbox.addButton(self.copy, QDialogButtonBox.ActionRole) self.bbox.addButton(self.ok, QDialogButtonBox.AcceptRole) self._layout.addWidget(self.bbox) self.resize(750, 500) self.bbox.setEnabled(False) QTimer.singleShot(1000, self.debug) def debug(self): try: from calibre.devices import debug raw = debug() self.log.setPlainText(raw) finally: self.bbox.setEnabled(True) def copy_to_clipboard(self): QApplication.clipboard().setText(self.log.toPlainText())
class DebugDevice(QDialog): def __init__(self, gui, parent=None): QDialog.__init__(self, parent) self.gui = gui self._layout = QVBoxLayout(self) self.setLayout(self._layout) self.log = QPlainTextEdit(self) self._layout.addWidget(self.log) self.log.setPlainText( _('Getting debug information, please wait') + '...') self.copy = QPushButton(_('Copy to &clipboard')) self.copy.setDefault(True) self.setWindowTitle(_('Debug device detection')) self.setWindowIcon(QIcon(I('debug.png'))) self.copy.clicked.connect(self.copy_to_clipboard) self.ok = QPushButton('&OK') self.ok.setAutoDefault(False) self.ok.clicked.connect(self.accept) self.bbox = QDialogButtonBox(self) self.bbox.addButton(self.copy, QDialogButtonBox.ActionRole) self.bbox.addButton(self.ok, QDialogButtonBox.AcceptRole) self._layout.addWidget(self.bbox) self.resize(750, 500) self.bbox.setEnabled(False) QTimer.singleShot(1000, self.debug) def debug(self): if self.gui.device_manager.is_device_connected: error_dialog( self, _('Device already detected'), _('A device (%s) is already detected by calibre.' ' If you wish to debug the detection of another device' ', first disconnect this device.') % self.gui.device_manager.connected_device.get_gui_name(), show=True) self.bbox.setEnabled(True) return self.gui.debug_detection(self) def __call__(self, job): if not self.isVisible(): return self.bbox.setEnabled(True) if job.failed: return error_dialog( self, _('Debugging failed'), _('Running debug device detection failed. Click Show ' 'Details for more information.'), det_msg=job.details, show=True) self.log.setPlainText(job.result) def copy_to_clipboard(self): QApplication.clipboard().setText(self.log.toPlainText())
class DebugDevice(QDialog): def __init__(self, gui, parent=None): QDialog.__init__(self, parent) self.gui = gui self._layout = QVBoxLayout(self) self.setLayout(self._layout) self.log = QPlainTextEdit(self) self._layout.addWidget(self.log) self.log.setPlainText(_('Getting debug information, please wait')+'...') self.copy = QPushButton(_('Copy to &clipboard')) self.copy.setDefault(True) self.setWindowTitle(_('Debug device detection')) self.setWindowIcon(QIcon(I('debug.png'))) self.copy.clicked.connect(self.copy_to_clipboard) self.ok = QPushButton('&OK') self.ok.setAutoDefault(False) self.ok.clicked.connect(self.accept) self.bbox = QDialogButtonBox(self) self.bbox.addButton(self.copy, QDialogButtonBox.ActionRole) self.bbox.addButton(self.ok, QDialogButtonBox.AcceptRole) self._layout.addWidget(self.bbox) self.resize(750, 500) self.bbox.setEnabled(False) QTimer.singleShot(1000, self.debug) def debug(self): if self.gui.device_manager.is_device_connected: error_dialog(self, _('Device already detected'), _('A device (%s) is already detected by calibre.' ' If you wish to debug the detection of another device' ', first disconnect this device.')% self.gui.device_manager.connected_device.get_gui_name(), show=True) self.bbox.setEnabled(True) return self.gui.debug_detection(self) def __call__(self, job): if not self.isVisible(): return self.bbox.setEnabled(True) if job.failed: return error_dialog(self, _('Debugging failed'), _('Running debug device detection failed. Click Show ' 'Details for more information.'), det_msg=job.details, show=True) self.log.setPlainText(job.result) def copy_to_clipboard(self): QApplication.clipboard().setText(self.log.toPlainText())
class AboutDialog(QDialog): def __init__(self, parent=None, name=None, modal=0, fl=None): if fl is None: fl = Qt.Dialog | Qt.WindowTitleHint QDialog.__init__(self, parent, Qt.Dialog | Qt.WindowTitleHint) self.setModal(modal) image0 = pixmaps.tigger_logo.pm() # self.setSizeGripEnabled(0) LayoutWidget = QWidget(self) LayoutWidget.setSizePolicy(QSizePolicy.MinimumExpanding, QSizePolicy.MinimumExpanding) lo_top = QVBoxLayout(LayoutWidget) lo_title = QHBoxLayout(None) self.title_icon = QLabel(LayoutWidget) self.title_icon.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed) self.title_icon.setPixmap(image0) self.title_icon.setAlignment(Qt.AlignCenter) lo_title.addWidget(self.title_icon) self.title_label = QLabel(LayoutWidget) self.title_label.setWordWrap(True) lo_title.addWidget(self.title_label) lo_top.addLayout(lo_title) lo_logos = QHBoxLayout(None) lo_top.addLayout(lo_logos) # for logo in ("astron",): # icon = QLabel(LayoutWidget) # icon.setSizePolicy(QSizePolicy.Fixed,QSizePolicy.Fixed) # icon.setPixmap(getattr(pixmaps,logo+"_logo").pm()) # icon.setAlignment(Qt.AlignCenter) # lo_logos.addWidget(icon) lo_mainbtn = QHBoxLayout(None) lo_mainbtn.addItem( QSpacerItem(20, 20, QSizePolicy.Expanding, QSizePolicy.Minimum)) lo_top.addLayout(lo_mainbtn) self.btn_ok = QPushButton(LayoutWidget) self.btn_ok.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed) self.btn_ok.setMinimumSize(QSize(60, 0)) self.btn_ok.setAutoDefault(1) self.btn_ok.setDefault(1) lo_mainbtn.addWidget(self.btn_ok) lo_mainbtn.addItem( QSpacerItem(20, 20, QSizePolicy.Expanding, QSizePolicy.Minimum)) self.languageChange() LayoutWidget.adjustSize() # LayoutWidget.resize(QSize(489,330).expandedTo(LayoutWidget.minimumSizeHint())) # self.resize(QSize(489,330).expandedTo(self.minimumSizeHint())) # self.clearWState(Qt.WState_Polished) self.connect(self.btn_ok, SIGNAL("clicked()"), self.accept) def languageChange(self): self.setWindowTitle(self.__tr("About Tigger")) self.title_label.setText(self.__tr( \ """<h3>Tigger %s</h3> <p>(C) 2010-2017 Oleg Smirnov & Rhodes University & SKA SA<br> <br>Please direct feedback and bug reports at https://github.com/ska-sa/tigger</p> """ % (release_string) \ )) self.btn_ok.setText(self.__tr("&OK")) def __tr(self, s, c=None): return qApp.translate("About", s, c)
class AboutDialog(QDialog): def __init__(self, parent=None, name=None, modal=0, fl=None): if fl is None: fl = Qt.Dialog | Qt.WindowTitleHint QDialog.__init__(self, parent, Qt.Dialog | Qt.WindowTitleHint) self.setModal(modal) image0 = pixmaps.tigger_logo.pm() # self.setSizeGripEnabled(0) LayoutWidget = QWidget(self) LayoutWidget.setSizePolicy(QSizePolicy.MinimumExpanding, QSizePolicy.MinimumExpanding) lo_top = QVBoxLayout(LayoutWidget) lo_title = QHBoxLayout(None) self.title_icon = QLabel(LayoutWidget) self.title_icon.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed) self.title_icon.setPixmap(image0) self.title_icon.setAlignment(Qt.AlignCenter) lo_title.addWidget(self.title_icon) self.title_label = QLabel(LayoutWidget) self.title_label.setWordWrap(True) lo_title.addWidget(self.title_label) lo_top.addLayout(lo_title) lo_logos = QHBoxLayout(None) lo_top.addLayout(lo_logos) # for logo in ("astron",): # icon = QLabel(LayoutWidget) # icon.setSizePolicy(QSizePolicy.Fixed,QSizePolicy.Fixed) # icon.setPixmap(getattr(pixmaps,logo+"_logo").pm()) # icon.setAlignment(Qt.AlignCenter) # lo_logos.addWidget(icon) lo_mainbtn = QHBoxLayout(None) lo_mainbtn.addItem(QSpacerItem(20, 20, QSizePolicy.Expanding, QSizePolicy.Minimum)) lo_top.addLayout(lo_mainbtn) self.btn_ok = QPushButton(LayoutWidget) self.btn_ok.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed) self.btn_ok.setMinimumSize(QSize(60, 0)) self.btn_ok.setAutoDefault(1) self.btn_ok.setDefault(1) lo_mainbtn.addWidget(self.btn_ok) lo_mainbtn.addItem(QSpacerItem(20, 20, QSizePolicy.Expanding, QSizePolicy.Minimum)) self.languageChange() LayoutWidget.adjustSize() # LayoutWidget.resize(QSize(489,330).expandedTo(LayoutWidget.minimumSizeHint())) # self.resize(QSize(489,330).expandedTo(self.minimumSizeHint())) # self.clearWState(Qt.WState_Polished) self.connect(self.btn_ok, SIGNAL("clicked()"), self.accept) def languageChange(self): self.setWindowTitle(self.__tr("About Tigger")) self.title_label.setText(self.__tr( \ """<h3>Tigger %s</h3> <p>(C) 2010-2017 Oleg Smirnov & Rhodes University & SKA SA<br> <br>Please direct feedback and bug reports at https://github.com/ska-sa/tigger</p> """ % (release_string) \ )) self.btn_ok.setText(self.__tr("&OK")) def __tr(self, s, c=None): return qApp.translate("About", s, c)
class parameter_dialog_or_frame: """ use as a pre-mixin before QDialog or QFrame """ ####@@@@ def __init__(self, parent=None, desc=None, name=None, modal=0, fl=0, env=None, type="QDialog"): if env is None: import foundation.env as env # this is a little weird... probably it'll be ok, and logically it seems correct. self.desc = desc self.typ = type if type == "QDialog": QDialog.__init__(self, parent, name, modal, fl) elif type == "QTextEdit": QTextEdit.__init__(self, parent, name) elif type == "QFrame": QFrame.__init__(self, parent, name) else: print "don't know about type == %r" % (type, ) self.image1 = QPixmap() self.image1.loadFromData(image1_data, "PNG") # should be: title_icon #### self.image3 = QPixmap() self.image3.loadFromData(image3_data, "PNG") self.image4 = QPixmap() self.image4.loadFromData(image4_data, "PNG") self.image5 = QPixmap() self.image5.loadFromData(image5_data, "PNG") self.image6 = QPixmap() self.image6.loadFromData(image6_data, "PNG") self.image7 = QPixmap() self.image7.loadFromData(image7_data, "PNG") self.image0 = QPixmap(image0_data) # should be: border_icon #### self.image2 = QPixmap(image2_data) # should be: sponsor_pixmap #### try: ####@@@@ title_icon_name = self.desc.options.get('title_icon') border_icon_name = self.desc.options.get('border_icon') if title_icon_name: self.image1 = imagename_to_pixmap( title_icon_name) ###@@@ pass icon_path ###@@@ import imagename_to_pixmap or use env function # or let that func itself be an arg, or have an env arg for it ###e rename it icon_name_to_pixmap, or find_icon? (the latter only if it's ok if it returns an iconset) ###e use iconset instead? if border_icon_name: self.image0 = imagename_to_pixmap(border_icon_name) except: print_compact_traceback( "bug in icon-setting code, using fallback icons: ") pass if not name: self.setName("parameter_dialog_or_frame") ### ###k guess this will need: if type == 'QDialog' self.setIcon(self.image0) # should be: border_icon #### nanotube_dialogLayout = QVBoxLayout(self, 0, 0, "nanotube_dialogLayout") self.heading_frame = QFrame(self, "heading_frame") self.heading_frame.setPaletteBackgroundColor(QColor(122, 122, 122)) self.heading_frame.setFrameShape(QFrame.NoFrame) self.heading_frame.setFrameShadow(QFrame.Plain) heading_frameLayout = QHBoxLayout(self.heading_frame, 0, 3, "heading_frameLayout") self.heading_pixmap = QLabel(self.heading_frame, "heading_pixmap") self.heading_pixmap.setSizePolicy( QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed, 0, 0, self.heading_pixmap.sizePolicy().hasHeightForWidth())) self.heading_pixmap.setPixmap( self.image1) # should be: title_icon #### self.heading_pixmap.setScaledContents(1) heading_frameLayout.addWidget(self.heading_pixmap) self.heading_label = QLabel(self.heading_frame, "heading_label") self.heading_label.setPaletteForegroundColor(QColor(255, 255, 255)) heading_label_font = QFont(self.heading_label.font()) heading_label_font.setPointSize(12) heading_label_font.setBold(1) self.heading_label.setFont(heading_label_font) heading_frameLayout.addWidget(self.heading_label) nanotube_dialogLayout.addWidget(self.heading_frame) self.body_frame = QFrame(self, "body_frame") self.body_frame.setFrameShape(QFrame.StyledPanel) self.body_frame.setFrameShadow(QFrame.Raised) body_frameLayout = QVBoxLayout(self.body_frame, 3, 3, "body_frameLayout") self.sponsor_frame = QFrame(self.body_frame, "sponsor_frame") self.sponsor_frame.setPaletteBackgroundColor(QColor(255, 255, 255)) self.sponsor_frame.setFrameShape(QFrame.StyledPanel) self.sponsor_frame.setFrameShadow(QFrame.Raised) sponsor_frameLayout = QHBoxLayout(self.sponsor_frame, 0, 0, "sponsor_frameLayout") self.sponsor_btn = QPushButton(self.sponsor_frame, "sponsor_btn") self.sponsor_btn.setAutoDefault(0) #bruce 060703 bugfix self.sponsor_btn.setSizePolicy( QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Preferred, 0, 0, self.sponsor_btn.sizePolicy().hasHeightForWidth())) self.sponsor_btn.setPaletteBackgroundColor(QColor(255, 255, 255)) self.sponsor_btn.setPixmap( self.image2 ) # should be: sponsor_pixmap #### [also we'll need to support >1 sponsor] self.sponsor_btn.setFlat(1) sponsor_frameLayout.addWidget(self.sponsor_btn) body_frameLayout.addWidget(self.sponsor_frame) layout59 = QHBoxLayout(None, 0, 6, "layout59") left_spacer = QSpacerItem(20, 20, QSizePolicy.Expanding, QSizePolicy.Minimum) layout59.addItem(left_spacer) self.done_btn = QToolButton(self.body_frame, "done_btn") self.done_btn.setIcon(QIcon(self.image3)) layout59.addWidget(self.done_btn) self.abort_btn = QToolButton(self.body_frame, "abort_btn") self.abort_btn.setIcon(QIcon(self.image4)) layout59.addWidget(self.abort_btn) self.preview_btn = QToolButton(self.body_frame, "preview_btn") self.preview_btn.setIcon(QIcon(self.image5)) layout59.addWidget(self.preview_btn) self.whatsthis_btn = QToolButton(self.body_frame, "whatsthis_btn") self.whatsthis_btn.setIcon(QIcon(self.image6)) layout59.addWidget(self.whatsthis_btn) right_spacer = QSpacerItem(20, 20, QSizePolicy.Expanding, QSizePolicy.Minimum) layout59.addItem(right_spacer) body_frameLayout.addLayout(layout59) self.groups = [] self.param_getters = { } # map from param name to get-function (which gets current value out of its widget or controller) for group_desc in self.desc.kids('group'): # == start parameters_grpbox ### this will differ for Windows style header_refs = [ ] # keep python refcounted refs to all objects we make (at least the ones pyuic stored in self attrs) self.parameters_grpbox = QGroupBox(self.body_frame, "parameters_grpbox") self.parameters_grpbox.setFrameShape(QGroupBox.StyledPanel) self.parameters_grpbox.setFrameShadow(QGroupBox.Sunken) self.parameters_grpbox.setMargin(0) self.parameters_grpbox.setColumnLayout(0, Qt.Vertical) self.parameters_grpbox.layout().setSpacing(1) self.parameters_grpbox.layout().setMargin(4) parameters_grpboxLayout = QVBoxLayout( self.parameters_grpbox.layout()) parameters_grpboxLayout.setAlignment(Qt.AlignTop) layout20 = QHBoxLayout(None, 0, 6, "layout20") self.nt_parameters_grpbtn = QPushButton(self.parameters_grpbox, "nt_parameters_grpbtn") self.nt_parameters_grpbtn.setSizePolicy( QSizePolicy( QSizePolicy.Minimum, QSizePolicy.Fixed, 0, 0, self.nt_parameters_grpbtn.sizePolicy().hasHeightForWidth()) ) self.nt_parameters_grpbtn.setMaximumSize(QSize(16, 16)) self.nt_parameters_grpbtn.setAutoDefault(0) self.nt_parameters_grpbtn.setIcon(QIcon( self.image7)) ### not always right, but doesn't matter self.nt_parameters_grpbtn.setFlat(1) layout20.addWidget(self.nt_parameters_grpbtn) self.parameters_grpbox_label = QLabel(self.parameters_grpbox, "parameters_grpbox_label") self.parameters_grpbox_label.setSizePolicy( QSizePolicy( QSizePolicy.Preferred, QSizePolicy.Minimum, 0, 0, self.parameters_grpbox_label.sizePolicy(). hasHeightForWidth())) self.parameters_grpbox_label.setAlignment(QLabel.AlignVCenter) layout20.addWidget(self.parameters_grpbox_label) gbx_spacer1 = QSpacerItem(67, 16, QSizePolicy.Expanding, QSizePolicy.Minimum) layout20.addItem(gbx_spacer1) parameters_grpboxLayout.addLayout(layout20) nt_parameters_body_layout = QGridLayout( None, 1, 1, 0, 6, "nt_parameters_body_layout" ) ### what is 6 -- is it related to number of items??? # is it 6 in all the ones we got, but that could be a designer error so i better look it up sometime. # == start its kids # will use from above: self.parameters_grpbox, nt_parameters_body_layout nextrow = 0 # which row of the QGridLayout to start filling next (loop variable) hidethese = [ ] # set of objects to hide or show, when this group is closed or opened for param in group_desc.kids('parameter'): # param (a group subobj desc) is always a parameter, but we already plan to extend this beyond that, # so we redundantly test for this here. getter = None paramname = None # set these for use by uniform code at the end (e.g. for tooltips) editfield = None label = None if param.isa('parameter'): label = QLabel(self.parameters_grpbox, "members_label") label.setAlignment(QLabel.AlignVCenter | QLabel.AlignRight) nt_parameters_body_layout.addWidget(label, nextrow, 0) hidethese.append(label) thisrow = nextrow nextrow += 1 #e following should be known in a place that knows the input language, not here paramname = param.options.get('name') or ( param.args and param.args[0]) or "?" paramlabel = param.options.get( 'label' ) or paramname ##e wrong, label "" or none ought to be possible # QtGui.QApplication.translate(self.__class__.__name__, "xyz") label.setText( QtGui.QApplication.translate(self.__class__.__name__, paramlabel)) if param.isa('parameter', widget='combobox', type=('str', None)): self.members_combox = QComboBox( 0, self.parameters_grpbox, "members_combox") ###k what's 0? editfield = self.members_combox #### it probably needs a handler class, and then that could do this setup self.members_combox.clear() default = param.options.get( 'default', None) # None is not equal to any string thewidgetkid = param.kids( 'widget' )[-1] # kluge; need to think what the desc method for this should be for item in thewidgetkid.kids('item'): itemval = item.args[0] itemtext = itemval self.members_combox.insertItem( QtGui.QApplication.translate( self.__class__.__name__, itemtext)) #k __tr ok?? if itemval == default: #k or itemtext? pass ##k i find no setItem in our py code, so not sure yet what to do for this. nt_parameters_body_layout.addWidget( self.members_combox, thisrow, 1) hidethese.append(self.members_combox) getter = (lambda combobox=self.members_combox: str( combobox.currentText())) ##e due to __tr or non-str values, it might be better to use currentIndex and look it up in a table # (though whether __tr is good here might depend on what it's used for) elif param.isa('parameter', widget=('lineedit', None), type=('str', None)): # this covers explicit str|lineedit, and 3 default cases str, lineedit, neither. # (i.e. if you say parameter and nothing else, it's str lineedit by default.) self.length_linedit = QLineEdit(self.parameters_grpbox, "length_linedit") editfield = self.length_linedit nt_parameters_body_layout.addWidget( self.length_linedit, thisrow, 1) hidethese.append(self.length_linedit) default = str(param.options.get('default', "")) self.length_linedit.setText( QtGui.QApplication.translate(self.__class__.__name__, default)) # __tr ok? getter = (lambda lineedit=self.length_linedit: str( lineedit.text())) elif param.isa('parameter', widget=('lineedit', None), type='float'): self.length_linedit = QLineEdit(self.parameters_grpbox, "length_linedit") editfield = self.length_linedit nt_parameters_body_layout.addWidget( self.length_linedit, thisrow, 1) hidethese.append(self.length_linedit) controller = FloatLineeditController_Qt( self, param, self.length_linedit) header_refs.append(controller) getter = controller.get_value elif param.isa('parameter', widget = ('spinbox', None), type = 'int') or \ param.isa('parameter', widget = ('spinbox'), type = None): self.chirality_N_spinbox = QSpinBox( self.parameters_grpbox, "chirality_N_spinbox" ) # was chirality_m_spinbox, now chirality_N_spinbox editfield = self.chirality_N_spinbox ### seems like Qt defaults for min and max are 0,100 -- way too small a range! if param.options.has_key('min') or 1: self.chirality_N_spinbox.setMinimum( param.options.get('min', -999999999)) # was 0 if param.options.has_key('max') or 1: self.chirality_N_spinbox.setMaximum( param.options.get( 'max', +999999999)) # wasn't in egcode, but needed self.chirality_N_spinbox.setValue( param.options.get('default', 0)) # was 5 ##e note: i suspect this default 0 should come from something that knows this desc grammar. suffix = param.options.get('suffix', '') if suffix: self.chirality_N_spinbox.setSuffix( QtGui.QApplication.translate( self.__class__.__name__, suffix)) else: self.chirality_N_spinbox.setSuffix( QString.null) # probably not needed nt_parameters_body_layout.addWidget( self.chirality_N_spinbox, thisrow, 1) hidethese.append(self.chirality_N_spinbox) getter = self.chirality_N_spinbox.value # note: it also has .text, which includes suffix else: print "didn't match:", param ###e improve this # things done the same way for all kinds of param-editing widgets if 1: #bruce 060703 moved this down here, as bugfix # set tooltip (same one for editfield and label) tooltip = param.options.get('tooltip', '') ###e do it for more kinds of params; share the code somehow; do it in controller, or setup-aid? ###k QToolTip appropriateness; tooltip option might be entirely untested if tooltip and label: QToolTip.add( label, QtGui.QApplication.translate( self.__class__.__name__, tooltip)) if tooltip and editfield: QToolTip.add( editfield, QtGui.QApplication.translate( self.__class__.__name__, tooltip) ) ##k ok?? review once not all params have same-row labels. if getter and paramname and paramname != '?': self.param_getters[paramname] = getter ### also bind these params to actions... continue # next param header_refs.extend([ self.parameters_grpbox, self.nt_parameters_grpbtn, self.parameters_grpbox_label ]) # now create the logic/control object for the group group = CollapsibleGroupController_Qt(self, group_desc, header_refs, hidethese, self.nt_parameters_grpbtn) ### maybe ask env for the class to use for this? self.groups.append( group ) ### needed?? only for scanning the params, AFAIK -- oh, and to maintain a python refcount. # from languageChange: if 1: # i don't know if these are needed: self.parameters_grpbox.setTitle(QString.null) self.nt_parameters_grpbtn.setText(QString.null) self.parameters_grpbox_label.setText( QtGui.QApplication.translate( self.__class__.__name__, group_desc.args[0])) # was "Nanotube Parameters" ##e note that it's questionable in the syntax design for this property of a group (overall group label) # to be in that position (desc arg 0). # == end its kids parameters_grpboxLayout.addLayout(nt_parameters_body_layout) body_frameLayout.addWidget(self.parameters_grpbox) # == end parameters groupbox continue # next group nanotube_dialogLayout.addWidget(self.body_frame) spacer14 = QSpacerItem(20, 20, QSizePolicy.Minimum, QSizePolicy.Expanding) nanotube_dialogLayout.addItem(spacer14) layout42 = QHBoxLayout(None, 4, 6, "layout42") btm_spacer = QSpacerItem(59, 20, QSizePolicy.Expanding, QSizePolicy.Minimum) layout42.addItem(btm_spacer) self.cancel_btn = QPushButton(self, "cancel_btn") self.cancel_btn.setAutoDefault(0) #bruce 060703 bugfix layout42.addWidget(self.cancel_btn) self.ok_btn = QPushButton(self, "ok_btn") self.ok_btn.setAutoDefault(0) #bruce 060703 bugfix layout42.addWidget(self.ok_btn) nanotube_dialogLayout.addLayout(layout42) self.languageChange() self.resize( QSize(246, 618).expandedTo(self.minimumSizeHint()) ) ### this size will need to be adjusted (guess -- it's only place overall size is set) qt4todo('self.clearWState(Qt.WState_Polished)') ## self.connect(self.nt_parameters_grpbtn,SIGNAL("clicked()"),self.toggle_nt_parameters_grpbtn) #### # new: for button, methodname in ( (self.sponsor_btn, 'do_sponsor_btn'), #e generalize to more than one sponsor button (self.done_btn, 'do_done_btn'), (self.abort_btn, 'do_abort_btn'), (self.preview_btn, 'do_preview_btn'), (self.whatsthis_btn, 'do_whatsthis_btn'), (self.cancel_btn, 'do_cancel_btn'), (self.ok_btn, 'do_ok_btn')): if hasattr(self, methodname): self.connect(button, SIGNAL("clicked()"), getattr(self, methodname)) return def languageChange(self): opts = self.desc.option_attrs self.setCaption( QtGui.QApplication.translate(self.__class__.__name__, opts.caption)) # was "Nanotube" self.heading_label.setText( QtGui.QApplication.translate(self.__class__.__name__, opts.title)) # was "Nanotube" self.sponsor_btn.setText(QString.null) self.done_btn.setText(QString.null) QToolTip.add( self.done_btn, QtGui.QApplication.translate(self.__class__.__name__, "Done")) self.abort_btn.setText(QString.null) QToolTip.add( self.abort_btn, QtGui.QApplication.translate(self.__class__.__name__, "Cancel")) self.preview_btn.setText(QString.null) QToolTip.add( self.preview_btn, QtGui.QApplication.translate(self.__class__.__name__, "Preview")) self.whatsthis_btn.setText(QString.null) QToolTip.add( self.whatsthis_btn, QtGui.QApplication.translate(self.__class__.__name__, "What's This Help")) ### move these up: ## if 0: ## self.parameters_grpbox.setTitle(QString.null) ## self.nt_parameters_grpbtn.setText(QString.null) ## self.parameters_grpbox_label.setText(QtGui.QApplication.translate(self.__class__.__name__, "Nanotube Parameters")) ## if 0: ## self.members_label.setText(QtGui.QApplication.translate(self.__class__.__name__, "Members :")) ## self.length_label.setText(QtGui.QApplication.translate(self.__class__.__name__, "Length :")) ## self.chirality_n_label.setText(QtGui.QApplication.translate(self.__class__.__name__, "Chirality (n) :")) ## self.members_combox.clear() ## self.members_combox.insertItem(QtGui.QApplication.translate(self.__class__.__name__, "C - C")) ## self.members_combox.insertItem(QtGui.QApplication.translate(self.__class__.__name__, "B - N")) ## self.length_linedit.setText(QtGui.QApplication.translate(self.__class__.__name__, "20.0 A")) ## self.chirality_N_spinbox.setSuffix(QString.null) self.cancel_btn.setText( QtGui.QApplication.translate(self.__class__.__name__, "Cancel")) self.ok_btn.setText( QtGui.QApplication.translate(self.__class__.__name__, "OK")) return pass # end of class parameter_dialog_or_frame -- maybe it should be renamed
class parameter_dialog_or_frame: """ use as a pre-mixin before QDialog or QFrame """ ####@@@@ def __init__(self, parent = None, desc = None, name = None, modal = 0, fl = 0, env = None, type = "QDialog"): if env is None: import foundation.env as env # this is a little weird... probably it'll be ok, and logically it seems correct. self.desc = desc self.typ = type if type == "QDialog": QDialog.__init__(self,parent,name,modal,fl) elif type == "QTextEdit": QTextEdit.__init__(self, parent, name) elif type == "QFrame": QFrame.__init__(self,parent,name) else: print "don't know about type == %r" % (type,) self.image1 = QPixmap() self.image1.loadFromData(image1_data,"PNG") # should be: title_icon #### self.image3 = QPixmap() self.image3.loadFromData(image3_data,"PNG") self.image4 = QPixmap() self.image4.loadFromData(image4_data,"PNG") self.image5 = QPixmap() self.image5.loadFromData(image5_data,"PNG") self.image6 = QPixmap() self.image6.loadFromData(image6_data,"PNG") self.image7 = QPixmap() self.image7.loadFromData(image7_data,"PNG") self.image0 = QPixmap(image0_data) # should be: border_icon #### self.image2 = QPixmap(image2_data) # should be: sponsor_pixmap #### try: ####@@@@ title_icon_name = self.desc.options.get('title_icon') border_icon_name = self.desc.options.get('border_icon') if title_icon_name: self.image1 = imagename_to_pixmap(title_icon_name) ###@@@ pass icon_path ###@@@ import imagename_to_pixmap or use env function # or let that func itself be an arg, or have an env arg for it ###e rename it icon_name_to_pixmap, or find_icon? (the latter only if it's ok if it returns an iconset) ###e use iconset instead? if border_icon_name: self.image0 = imagename_to_pixmap(border_icon_name) except: print_compact_traceback("bug in icon-setting code, using fallback icons: ") pass if not name: self.setName("parameter_dialog_or_frame") ### ###k guess this will need: if type == 'QDialog' self.setIcon(self.image0) # should be: border_icon #### nanotube_dialogLayout = QVBoxLayout(self,0,0,"nanotube_dialogLayout") self.heading_frame = QFrame(self,"heading_frame") self.heading_frame.setPaletteBackgroundColor(QColor(122,122,122)) self.heading_frame.setFrameShape(QFrame.NoFrame) self.heading_frame.setFrameShadow(QFrame.Plain) heading_frameLayout = QHBoxLayout(self.heading_frame,0,3,"heading_frameLayout") self.heading_pixmap = QLabel(self.heading_frame,"heading_pixmap") self.heading_pixmap.setSizePolicy(QSizePolicy(QSizePolicy.Fixed,QSizePolicy.Fixed,0,0,self.heading_pixmap.sizePolicy().hasHeightForWidth())) self.heading_pixmap.setPixmap(self.image1) # should be: title_icon #### self.heading_pixmap.setScaledContents(1) heading_frameLayout.addWidget(self.heading_pixmap) self.heading_label = QLabel(self.heading_frame,"heading_label") self.heading_label.setPaletteForegroundColor(QColor(255,255,255)) heading_label_font = QFont(self.heading_label.font()) heading_label_font.setPointSize(12) heading_label_font.setBold(1) self.heading_label.setFont(heading_label_font) heading_frameLayout.addWidget(self.heading_label) nanotube_dialogLayout.addWidget(self.heading_frame) self.body_frame = QFrame(self,"body_frame") self.body_frame.setFrameShape(QFrame.StyledPanel) self.body_frame.setFrameShadow(QFrame.Raised) body_frameLayout = QVBoxLayout(self.body_frame,3,3,"body_frameLayout") self.sponsor_frame = QFrame(self.body_frame,"sponsor_frame") self.sponsor_frame.setPaletteBackgroundColor(QColor(255,255,255)) self.sponsor_frame.setFrameShape(QFrame.StyledPanel) self.sponsor_frame.setFrameShadow(QFrame.Raised) sponsor_frameLayout = QHBoxLayout(self.sponsor_frame,0,0,"sponsor_frameLayout") self.sponsor_btn = QPushButton(self.sponsor_frame,"sponsor_btn") self.sponsor_btn.setAutoDefault(0) #bruce 060703 bugfix self.sponsor_btn.setSizePolicy(QSizePolicy(QSizePolicy.Preferred,QSizePolicy.Preferred,0,0,self.sponsor_btn.sizePolicy().hasHeightForWidth())) self.sponsor_btn.setPaletteBackgroundColor(QColor(255,255,255)) self.sponsor_btn.setPixmap(self.image2) # should be: sponsor_pixmap #### [also we'll need to support >1 sponsor] self.sponsor_btn.setFlat(1) sponsor_frameLayout.addWidget(self.sponsor_btn) body_frameLayout.addWidget(self.sponsor_frame) layout59 = QHBoxLayout(None,0,6,"layout59") left_spacer = QSpacerItem(20,20,QSizePolicy.Expanding,QSizePolicy.Minimum) layout59.addItem(left_spacer) self.done_btn = QToolButton(self.body_frame,"done_btn") self.done_btn.setIcon(QIcon(self.image3)) layout59.addWidget(self.done_btn) self.abort_btn = QToolButton(self.body_frame,"abort_btn") self.abort_btn.setIcon(QIcon(self.image4)) layout59.addWidget(self.abort_btn) self.preview_btn = QToolButton(self.body_frame,"preview_btn") self.preview_btn.setIcon(QIcon(self.image5)) layout59.addWidget(self.preview_btn) self.whatsthis_btn = QToolButton(self.body_frame,"whatsthis_btn") self.whatsthis_btn.setIcon(QIcon(self.image6)) layout59.addWidget(self.whatsthis_btn) right_spacer = QSpacerItem(20,20,QSizePolicy.Expanding,QSizePolicy.Minimum) layout59.addItem(right_spacer) body_frameLayout.addLayout(layout59) self.groups = [] self.param_getters = {} # map from param name to get-function (which gets current value out of its widget or controller) for group_desc in self.desc.kids('group'): # == start parameters_grpbox ### this will differ for Windows style header_refs = [] # keep python refcounted refs to all objects we make (at least the ones pyuic stored in self attrs) self.parameters_grpbox = QGroupBox(self.body_frame,"parameters_grpbox") self.parameters_grpbox.setFrameShape(QGroupBox.StyledPanel) self.parameters_grpbox.setFrameShadow(QGroupBox.Sunken) self.parameters_grpbox.setMargin(0) self.parameters_grpbox.setColumnLayout(0,Qt.Vertical) self.parameters_grpbox.layout().setSpacing(1) self.parameters_grpbox.layout().setMargin(4) parameters_grpboxLayout = QVBoxLayout(self.parameters_grpbox.layout()) parameters_grpboxLayout.setAlignment(Qt.AlignTop) layout20 = QHBoxLayout(None,0,6,"layout20") self.nt_parameters_grpbtn = QPushButton(self.parameters_grpbox,"nt_parameters_grpbtn") self.nt_parameters_grpbtn.setSizePolicy(QSizePolicy(QSizePolicy.Minimum,QSizePolicy.Fixed,0,0,self.nt_parameters_grpbtn.sizePolicy().hasHeightForWidth())) self.nt_parameters_grpbtn.setMaximumSize(QSize(16,16)) self.nt_parameters_grpbtn.setAutoDefault(0) self.nt_parameters_grpbtn.setIcon(QIcon(self.image7)) ### not always right, but doesn't matter self.nt_parameters_grpbtn.setFlat(1) layout20.addWidget(self.nt_parameters_grpbtn) self.parameters_grpbox_label = QLabel(self.parameters_grpbox,"parameters_grpbox_label") self.parameters_grpbox_label.setSizePolicy(QSizePolicy(QSizePolicy.Preferred,QSizePolicy.Minimum,0,0,self.parameters_grpbox_label.sizePolicy().hasHeightForWidth())) self.parameters_grpbox_label.setAlignment(QLabel.AlignVCenter) layout20.addWidget(self.parameters_grpbox_label) gbx_spacer1 = QSpacerItem(67,16,QSizePolicy.Expanding,QSizePolicy.Minimum) layout20.addItem(gbx_spacer1) parameters_grpboxLayout.addLayout(layout20) nt_parameters_body_layout = QGridLayout(None,1,1,0,6,"nt_parameters_body_layout") ### what is 6 -- is it related to number of items??? # is it 6 in all the ones we got, but that could be a designer error so i better look it up sometime. # == start its kids # will use from above: self.parameters_grpbox, nt_parameters_body_layout nextrow = 0 # which row of the QGridLayout to start filling next (loop variable) hidethese = [] # set of objects to hide or show, when this group is closed or opened for param in group_desc.kids('parameter'): # param (a group subobj desc) is always a parameter, but we already plan to extend this beyond that, # so we redundantly test for this here. getter = None paramname = None # set these for use by uniform code at the end (e.g. for tooltips) editfield = None label = None if param.isa('parameter'): label = QLabel(self.parameters_grpbox,"members_label") label.setAlignment(QLabel.AlignVCenter | QLabel.AlignRight) nt_parameters_body_layout.addWidget(label,nextrow,0) hidethese.append(label) thisrow = nextrow nextrow += 1 #e following should be known in a place that knows the input language, not here paramname = param.options.get('name') or (param.args and param.args[0]) or "?" paramlabel = param.options.get('label') or paramname ##e wrong, label "" or none ought to be possible # QtGui.QApplication.translate(self.__class__.__name__, "xyz") label.setText(QtGui.QApplication.translate(self.__class__.__name__, paramlabel)) if param.isa('parameter', widget = 'combobox', type = ('str',None)): self.members_combox = QComboBox(0,self.parameters_grpbox,"members_combox") ###k what's 0? editfield = self.members_combox #### it probably needs a handler class, and then that could do this setup self.members_combox.clear() default = param.options.get('default', None) # None is not equal to any string thewidgetkid = param.kids('widget')[-1] # kluge; need to think what the desc method for this should be for item in thewidgetkid.kids('item'): itemval = item.args[0] itemtext = itemval self.members_combox.insertItem(QtGui.QApplication.translate(self.__class__.__name__, itemtext)) #k __tr ok?? if itemval == default: #k or itemtext? pass ##k i find no setItem in our py code, so not sure yet what to do for this. nt_parameters_body_layout.addWidget(self.members_combox,thisrow,1) hidethese.append(self.members_combox) getter = (lambda combobox = self.members_combox: str(combobox.currentText())) ##e due to __tr or non-str values, it might be better to use currentIndex and look it up in a table # (though whether __tr is good here might depend on what it's used for) elif param.isa('parameter', widget = ('lineedit', None), type = ('str',None)): # this covers explicit str|lineedit, and 3 default cases str, lineedit, neither. # (i.e. if you say parameter and nothing else, it's str lineedit by default.) self.length_linedit = QLineEdit(self.parameters_grpbox,"length_linedit") editfield = self.length_linedit nt_parameters_body_layout.addWidget(self.length_linedit,thisrow,1) hidethese.append(self.length_linedit) default = str(param.options.get('default', "")) self.length_linedit.setText(QtGui.QApplication.translate(self.__class__.__name__, default)) # __tr ok? getter = (lambda lineedit = self.length_linedit: str(lineedit.text())) elif param.isa('parameter', widget = ('lineedit', None), type = 'float'): self.length_linedit = QLineEdit(self.parameters_grpbox,"length_linedit") editfield = self.length_linedit nt_parameters_body_layout.addWidget(self.length_linedit,thisrow,1) hidethese.append(self.length_linedit) controller = FloatLineeditController_Qt(self, param, self.length_linedit) header_refs.append(controller) getter = controller.get_value elif param.isa('parameter', widget = ('spinbox', None), type = 'int') or \ param.isa('parameter', widget = ('spinbox'), type = None): self.chirality_N_spinbox = QSpinBox(self.parameters_grpbox,"chirality_N_spinbox") # was chirality_m_spinbox, now chirality_N_spinbox editfield = self.chirality_N_spinbox ### seems like Qt defaults for min and max are 0,100 -- way too small a range! if param.options.has_key('min') or 1: self.chirality_N_spinbox.setMinimum(param.options.get('min', -999999999)) # was 0 if param.options.has_key('max') or 1: self.chirality_N_spinbox.setMaximum(param.options.get('max', +999999999)) # wasn't in egcode, but needed self.chirality_N_spinbox.setValue(param.options.get('default', 0)) # was 5 ##e note: i suspect this default 0 should come from something that knows this desc grammar. suffix = param.options.get('suffix', '') if suffix: self.chirality_N_spinbox.setSuffix(QtGui.QApplication.translate(self.__class__.__name__, suffix)) else: self.chirality_N_spinbox.setSuffix(QString.null) # probably not needed nt_parameters_body_layout.addWidget(self.chirality_N_spinbox,thisrow,1) hidethese.append(self.chirality_N_spinbox) getter = self.chirality_N_spinbox.value # note: it also has .text, which includes suffix else: print "didn't match:",param ###e improve this # things done the same way for all kinds of param-editing widgets if 1: #bruce 060703 moved this down here, as bugfix # set tooltip (same one for editfield and label) tooltip = param.options.get('tooltip', '') ###e do it for more kinds of params; share the code somehow; do it in controller, or setup-aid? ###k QToolTip appropriateness; tooltip option might be entirely untested if tooltip and label: QToolTip.add(label, QtGui.QApplication.translate(self.__class__.__name__, tooltip)) if tooltip and editfield: QToolTip.add(editfield, QtGui.QApplication.translate(self.__class__.__name__, tooltip)) ##k ok?? review once not all params have same-row labels. if getter and paramname and paramname != '?': self.param_getters[paramname] = getter ### also bind these params to actions... continue # next param header_refs.extend( [self.parameters_grpbox, self.nt_parameters_grpbtn, self.parameters_grpbox_label] ) # now create the logic/control object for the group group = CollapsibleGroupController_Qt(self, group_desc, header_refs, hidethese, self.nt_parameters_grpbtn) ### maybe ask env for the class to use for this? self.groups.append(group) ### needed?? only for scanning the params, AFAIK -- oh, and to maintain a python refcount. # from languageChange: if 1: # i don't know if these are needed: self.parameters_grpbox.setTitle(QString.null) self.nt_parameters_grpbtn.setText(QString.null) self.parameters_grpbox_label.setText(QtGui.QApplication.translate(self.__class__.__name__, group_desc.args[0])) # was "Nanotube Parameters" ##e note that it's questionable in the syntax design for this property of a group (overall group label) # to be in that position (desc arg 0). # == end its kids parameters_grpboxLayout.addLayout(nt_parameters_body_layout) body_frameLayout.addWidget(self.parameters_grpbox) # == end parameters groupbox continue # next group nanotube_dialogLayout.addWidget(self.body_frame) spacer14 = QSpacerItem(20,20,QSizePolicy.Minimum,QSizePolicy.Expanding) nanotube_dialogLayout.addItem(spacer14) layout42 = QHBoxLayout(None,4,6,"layout42") btm_spacer = QSpacerItem(59,20,QSizePolicy.Expanding,QSizePolicy.Minimum) layout42.addItem(btm_spacer) self.cancel_btn = QPushButton(self,"cancel_btn") self.cancel_btn.setAutoDefault(0) #bruce 060703 bugfix layout42.addWidget(self.cancel_btn) self.ok_btn = QPushButton(self,"ok_btn") self.ok_btn.setAutoDefault(0) #bruce 060703 bugfix layout42.addWidget(self.ok_btn) nanotube_dialogLayout.addLayout(layout42) self.languageChange() self.resize(QSize(246,618).expandedTo(self.minimumSizeHint())) ### this size will need to be adjusted (guess -- it's only place overall size is set) qt4todo('self.clearWState(Qt.WState_Polished)') ## self.connect(self.nt_parameters_grpbtn,SIGNAL("clicked()"),self.toggle_nt_parameters_grpbtn) #### # new: for button, methodname in ((self.sponsor_btn, 'do_sponsor_btn'), #e generalize to more than one sponsor button (self.done_btn, 'do_done_btn'), (self.abort_btn, 'do_abort_btn'), (self.preview_btn, 'do_preview_btn'), (self.whatsthis_btn, 'do_whatsthis_btn'), (self.cancel_btn, 'do_cancel_btn'), (self.ok_btn, 'do_ok_btn')): if hasattr(self, methodname): self.connect(button, SIGNAL("clicked()"), getattr(self, methodname)) return def languageChange(self): opts = self.desc.option_attrs self.setCaption(QtGui.QApplication.translate(self.__class__.__name__, opts.caption)) # was "Nanotube" self.heading_label.setText(QtGui.QApplication.translate(self.__class__.__name__, opts.title)) # was "Nanotube" self.sponsor_btn.setText(QString.null) self.done_btn.setText(QString.null) QToolTip.add(self.done_btn,QtGui.QApplication.translate(self.__class__.__name__, "Done")) self.abort_btn.setText(QString.null) QToolTip.add(self.abort_btn,QtGui.QApplication.translate(self.__class__.__name__, "Cancel")) self.preview_btn.setText(QString.null) QToolTip.add(self.preview_btn,QtGui.QApplication.translate(self.__class__.__name__, "Preview")) self.whatsthis_btn.setText(QString.null) QToolTip.add(self.whatsthis_btn,QtGui.QApplication.translate(self.__class__.__name__, "What's This Help")) ### move these up: ## if 0: ## self.parameters_grpbox.setTitle(QString.null) ## self.nt_parameters_grpbtn.setText(QString.null) ## self.parameters_grpbox_label.setText(QtGui.QApplication.translate(self.__class__.__name__, "Nanotube Parameters")) ## if 0: ## self.members_label.setText(QtGui.QApplication.translate(self.__class__.__name__, "Members :")) ## self.length_label.setText(QtGui.QApplication.translate(self.__class__.__name__, "Length :")) ## self.chirality_n_label.setText(QtGui.QApplication.translate(self.__class__.__name__, "Chirality (n) :")) ## self.members_combox.clear() ## self.members_combox.insertItem(QtGui.QApplication.translate(self.__class__.__name__, "C - C")) ## self.members_combox.insertItem(QtGui.QApplication.translate(self.__class__.__name__, "B - N")) ## self.length_linedit.setText(QtGui.QApplication.translate(self.__class__.__name__, "20.0 A")) ## self.chirality_N_spinbox.setSuffix(QString.null) self.cancel_btn.setText(QtGui.QApplication.translate(self.__class__.__name__, "Cancel")) self.ok_btn.setText(QtGui.QApplication.translate(self.__class__.__name__, "OK")) return pass # end of class parameter_dialog_or_frame -- maybe it should be renamed
class PM_Dialog(QDialog, SponsorableMixin): """ The PM_Dialog class is the base class for Property Manager dialogs. [To make a PM class from this mixin-superclass, subclass it to customize the widget set and add behavior. You must also provide certain methods provided by GeneratorBaseClass (either by inheriting it -- not sure if superclass order matters for that -- or by defining them yourself), including ok_btn_clicked and several others, including at least some defined by SponsorableMixin (open_sponsor_homepage, setSponsor). This set of requirements may be cleaned up.] [Note: Technically, this is not a "base class" but a "mixin class".] """ headerTitleText = "" # The header title text. _widgetList = [] # A list of all group boxes in this PM dialog, # including the message group box. # (but not header, sponsor button, etc.) _groupBoxCount = 0 # Number of PM_GroupBoxes in this PM dialog. _lastGroupBox = None # The last PM_GroupBox in this PM dialog. # (i.e. the most recent PM_GroupBox added). def __init__(self, name, iconPath="", title=""): """ Property Manager constructor. @param name: the name to assign the property manager dialog object. @type name: str @param iconPath: the relative path for the icon (PNG image) that appears in the header. @type iconPath: str @param title: the title that appears in the header. @type title: str """ QDialog.__init__(self) self.setObjectName(name) self._widgetList = [] # Main pallete for PropMgr. self.setPalette(QPalette(pmColor)) # Main vertical layout for PropMgr. self.vBoxLayout = QVBoxLayout(self) self.vBoxLayout.setMargin(PM_MAINVBOXLAYOUT_MARGIN) self.vBoxLayout.setSpacing(PM_MAINVBOXLAYOUT_SPACING) # Add PropMgr's header, sponsor button, top row buttons and (hidden) # message group box. self._createHeader(iconPath, title) self._createSponsorButton() self._createTopRowBtns() # Create top buttons row self.MessageGroupBox = PM_MessageGroupBox(self) # Keep the line below around; it might be useful. # I may want to use it now that I understand it. # Mark 2007-05-17. #QMetaObject.connectSlotsByName(self) self._addGroupBoxes() try: self._addWhatsThisText() except: print_compact_traceback("Error loading whatsthis text for this " \ "property manager.") try: self._addToolTipText() except: print_compact_traceback("Error loading tool tip text for this " \ "property manager.") def keyPressEvent(self, event): """ Handles keyPress event. NOTE: Subclasses should carefully override this. Note that the default implementation doesn't permit ESC key as a way to close the PM_dialog. (this is typically dsesirable for Property Managers) If any subclass need to implement the key press, they should first call this method(i.e. superclass.keyPressEvent) and then implement specific code that closed the dialog when ESC key is pressed. """ key = event.key() # Don't use ESC key to close the PM dialog. Fixes bug 2596 if key == Qt.Key_Escape: pass else: QDialog.keyPressEvent(self, event) return def _addGroupBoxes(self): """ Add various group boxes to this PM. Subclasses should override this method. """ pass def _addWhatsThisText(self): """ Add what's this text. Subclasses should override this method. """ pass def _addToolTipText(self): """ Add Tool tip text. Subclasses should override this method. """ pass def show(self): """ Shows the Property Manager. """ self.setSponsor() if not self.pw or self: self.pw = self.win.activePartWindow() self.pw.updatePropertyManagerTab(self) self.pw.pwProjectTabWidget.setCurrentIndex( self.pw.pwProjectTabWidget.indexOf(self)) # Show the default message whenever we open the Property Manager. self.MessageGroupBox.MessageTextEdit.restoreDefault() def open(self, pm): """ Closes the current property manager (if any) and opens the property manager I{pm}. @param pm: The property manager to open. @type pm: L{PM_Dialog} or QDialog (of legacy PMs) @attention: This method is a temporary workaround for "Insert > Plane". The current command should always be responsible for (re)opening its own PM via self.show(). @see: L{show()} """ if 1: commandSequencer = self.win.commandSequencer #bruce 071008 commandName = commandSequencer.currentCommand.commandName # that's an internal name, but this is just for a debug print print "PM_Dialog.open(): Reopening the PM for command:", commandName # The following line of code is buggy when you, for instance, exit a PM # and reopen the previous one. It sends the disconnect signal twice to # the PM that is just closed.So disabling this line -- Ninad 2007-12-04 ##self.close() # Just in case there is another PM open. self.pw = self.win.activePartWindow() self.pw.updatePropertyManagerTab(pm) try: pm.setSponsor() except: print """PM_Dialog.open(): pm has no attribute 'setSponsor()' ignoring.""" self.pw.pwProjectTabWidget.setCurrentIndex( self.pw.pwProjectTabWidget.indexOf(pm)) def close(self): """ Closes the Property Manager. """ if not self.pw: self.pw = self.win.activePartWindow() self.pw.pwProjectTabWidget.setCurrentIndex(0) ## try: [bruce 071018 moved this lower, since errmsg only covers attr] pmWidget = self.pw.propertyManagerScrollArea.widget() if debug_flags.atom_debug: #bruce 071018 "atom_debug fyi: %r is closing %r (can they differ?)" % \ (self, pmWidget) try: pmWidget.update_props_if_needed_before_closing except AttributeError: if 1 or debug_flags.atom_debug: msg1 = "Last PropMgr %r doesn't have method" % pmWidget msg2 = " update_props_if_needed_before_closing. That's" msg3 = " OK (for now, only implemented for Plane PM). " msg4 = "Ignoring Exception: " print_compact_traceback(msg1 + msg2 + msg3 + msg4) #bruce 071018: I'll define that method in PM_Dialog # so this message should become rare or nonexistent, # so I'll make it happen whether or not atom_debug. else: pmWidget.update_props_if_needed_before_closing() self.pw.pwProjectTabWidget.removeTab( self.pw.pwProjectTabWidget.indexOf( self.pw.propertyManagerScrollArea)) if self.pw.propertyManagerTab: self.pw.propertyManagerTab = None def update_props_if_needed_before_closing(self): # bruce 071018 default implem """ Subclasses can override this to update some cosmetic properties of their associated model objects before closing self (the Property Manager). """ pass def updateMessage(self, msg=''): """ Updates the message box with an informative message @param msg: Message to be displayed in the Message groupbox of the property manager @type msg: string """ self.MessageGroupBox.insertHtmlMessage(msg, setAsDefault=False, minLines=5) def _createHeader(self, iconPath, title): """ Creates the Property Manager header, which contains an icon (a QLabel with a pixmap) and white text (a QLabel with text). @param iconPath: The relative path for the icon (PNG image) that appears in the header. @type iconPath: str @param title: The title that appears in the header. @type title: str """ # Heading frame (dark gray), which contains # a pixmap and (white) heading text. self.headerFrame = QFrame(self) self.headerFrame.setFrameShape(QFrame.NoFrame) self.headerFrame.setFrameShadow(QFrame.Plain) self.headerFrame.setPalette(QPalette(pmHeaderFrameColor)) self.headerFrame.setAutoFillBackground(True) # HBox layout for heading frame, containing the pixmap # and label (title). HeaderFrameHLayout = QHBoxLayout(self.headerFrame) # 2 pixels around edges -- HeaderFrameHLayout.setMargin(PM_HEADER_FRAME_MARGIN) # 5 pixel between pixmap and label. -- HeaderFrameHLayout.setSpacing(PM_HEADER_FRAME_SPACING) # PropMgr icon. Set image by calling setHeaderIcon(). self.headerIcon = QLabel(self.headerFrame) self.headerIcon.setSizePolicy( QSizePolicy(QSizePolicy.Policy(QSizePolicy.Fixed), QSizePolicy.Policy(QSizePolicy.Fixed))) self.headerIcon.setScaledContents(True) HeaderFrameHLayout.addWidget(self.headerIcon) # PropMgr header title text (a QLabel). self.headerTitle = QLabel(self.headerFrame) headerTitlePalette = self._getHeaderTitlePalette() self.headerTitle.setPalette(headerTitlePalette) self.headerTitle.setAlignment(PM_LABEL_LEFT_ALIGNMENT) # Assign header title font. self.headerTitle.setFont(self._getHeaderFont()) HeaderFrameHLayout.addWidget(self.headerTitle) self.vBoxLayout.addWidget(self.headerFrame) # Set header icon and title text. self.setHeaderIcon(iconPath) self.setHeaderTitle(title) def _getHeaderFont(self): """ Returns the font used for the header. @return: the header font @rtype: QFont """ font = QFont() font.setFamily(PM_HEADER_FONT) font.setPointSize(PM_HEADER_FONT_POINT_SIZE) font.setBold(PM_HEADER_FONT_BOLD) return font def setHeaderTitle(self, title): """ Set the Property Manager header title to string <title>. @param title: the title to insert in the header. @type title: str """ self.headerTitleText = title self.headerTitle.setText(title) def setHeaderIcon(self, iconPath): """ Set the Property Manager header icon. @param iconPath: the relative path to the PNG file containing the icon image. @type iconPath: str """ if not iconPath: return self.headerIcon.setPixmap(getpixmap(iconPath)) def _createSponsorButton(self): """ Creates the Property Manager sponsor button, which contains a QPushButton inside of a QGridLayout inside of a QFrame. The sponsor logo image is not loaded here. """ # Sponsor button (inside a frame) self.sponsor_frame = QFrame(self) self.sponsor_frame.setFrameShape(QFrame.NoFrame) self.sponsor_frame.setFrameShadow(QFrame.Plain) SponsorFrameGrid = QGridLayout(self.sponsor_frame) SponsorFrameGrid.setMargin(PM_SPONSOR_FRAME_MARGIN) SponsorFrameGrid.setSpacing(PM_SPONSOR_FRAME_SPACING) # Has no effect. self.sponsor_btn = QPushButton(self.sponsor_frame) self.sponsor_btn.setAutoDefault(False) self.sponsor_btn.setFlat(True) self.connect(self.sponsor_btn, SIGNAL("clicked()"), self.open_sponsor_homepage) SponsorFrameGrid.addWidget(self.sponsor_btn, 0, 0, 1, 1) self.vBoxLayout.addWidget(self.sponsor_frame) button_whatsthis_widget = self.sponsor_btn #bruce 070615 bugfix -- put tooltip & whatsthis on self.sponsor_btn, # not self. # [self.sponsor_frame might be another possible place to put them.] button_whatsthis_widget.setWhatsThis("""<b>Sponsor Button</b> <p>When clicked, this sponsor logo will display a short description about a NanoEngineer-1 sponsor. This can be an official sponsor or credit given to a contributor that has helped code part or all of this command. A link is provided in the description to learn more about this sponsor.</p>""") button_whatsthis_widget.setToolTip("NanoEngineer-1 Sponsor Button") return def _createTopRowBtns(self): """ Creates the Done, Cancel, Preview, Restore Defaults and What's This buttons row at the top of the Property Manager. """ # Main "button group" widget (but it is not a QButtonGroup). self.pmTopRowBtns = QHBoxLayout() # This QHBoxLayout is (probably) not necessary. Try using just the frame # for the foundation. I think it should work. Mark 2007-05-30 # Horizontal spacer horizontalSpacer = QSpacerItem(1, 1, QSizePolicy.Expanding, QSizePolicy.Minimum) # Frame containing all the buttons. self.topRowBtnsFrame = QFrame() self.topRowBtnsFrame.setFrameShape(QFrame.NoFrame) self.topRowBtnsFrame.setFrameShadow(QFrame.Plain) # Create Hbox layout for main frame. topRowBtnsHLayout = QHBoxLayout(self.topRowBtnsFrame) topRowBtnsHLayout.setMargin(PM_TOPROWBUTTONS_MARGIN) topRowBtnsHLayout.setSpacing(PM_TOPROWBUTTONS_SPACING) topRowBtnsHLayout.addItem(horizontalSpacer) # Set button type. if 1: # Mark 2007-05-30 # Needs to be QToolButton for MacOS. Fine for Windows, too. buttonType = QToolButton # May want to use QToolButton.setAutoRaise(1) below. Mark 2007-05-29 else: buttonType = QPushButton # Do not use. # Done (OK) button. self.done_btn = buttonType(self.topRowBtnsFrame) self.done_btn.setIcon( geticon("ui/actions/Properties Manager/Done.png")) self.done_btn.setIconSize(QSize(22, 22)) self.connect(self.done_btn, SIGNAL("clicked()"), self.doneButtonClicked) self.done_btn.setToolTip("Done") topRowBtnsHLayout.addWidget(self.done_btn) # Cancel (Abort) button. self.cancel_btn = buttonType(self.topRowBtnsFrame) self.cancel_btn.setIcon( geticon("ui/actions/Properties Manager/Abort.png")) self.cancel_btn.setIconSize(QSize(22, 22)) self.connect(self.cancel_btn, SIGNAL("clicked()"), self.cancelButtonClicked) self.cancel_btn.setToolTip("Cancel") topRowBtnsHLayout.addWidget(self.cancel_btn) #@ abort_btn deprecated. We still need it because modes use it. self.abort_btn = self.cancel_btn # Restore Defaults button. self.restore_defaults_btn = buttonType(self.topRowBtnsFrame) self.restore_defaults_btn.setIcon( geticon("ui/actions/Properties Manager/Restore.png")) self.restore_defaults_btn.setIconSize(QSize(22, 22)) self.connect(self.restore_defaults_btn, SIGNAL("clicked()"), self.restoreDefaultsButtonClicked) self.restore_defaults_btn.setToolTip("Restore Defaults") topRowBtnsHLayout.addWidget(self.restore_defaults_btn) # Preview (glasses) button. self.preview_btn = buttonType(self.topRowBtnsFrame) self.preview_btn.setIcon( geticon("ui/actions/Properties Manager/Preview.png")) self.preview_btn.setIconSize(QSize(22, 22)) self.connect(self.preview_btn, SIGNAL("clicked()"), self.previewButtonClicked) self.preview_btn.setToolTip("Preview") topRowBtnsHLayout.addWidget(self.preview_btn) # What's This (?) button. self.whatsthis_btn = buttonType(self.topRowBtnsFrame) self.whatsthis_btn.setIcon( geticon("ui/actions/Properties Manager/WhatsThis.png")) self.whatsthis_btn.setIconSize(QSize(22, 22)) self.connect(self.whatsthis_btn, SIGNAL("clicked()"), self.whatsThisButtonClicked) self.whatsthis_btn.setToolTip("Enter \"What's This\" help mode") topRowBtnsHLayout.addWidget(self.whatsthis_btn) topRowBtnsHLayout.addItem(horizontalSpacer) # Create Button Row self.pmTopRowBtns.addWidget(self.topRowBtnsFrame) self.vBoxLayout.addLayout(self.pmTopRowBtns) # Add What's This for buttons. self.done_btn.setWhatsThis("""<b>Done</b> <p> <img source=\"ui/actions/Properties Manager/Done.png\"><br> Completes and/or exits the current command.</p>""") self.cancel_btn.setWhatsThis("""<b>Cancel</b> <p> <img source=\"ui/actions/Properties Manager/Abort.png\"><br> Cancels the current command.</p>""") self.restore_defaults_btn.setWhatsThis("""<b>Restore Defaults</b> <p><img source=\"ui/actions/Properties Manager/Restore.png\"><br> Restores the defaut values of the Property Manager.</p>""") self.preview_btn.setWhatsThis("""<b>Preview</b> <p> <img source=\"ui/actions/Properties Manager/Preview.png\"><br> Preview the structure based on current Property Manager settings. </p>""") self.whatsthis_btn.setWhatsThis("""<b>What's This</b> <p> <img source=\"ui/actions/Properties Manager/WhatsThis.png\"><br> This invokes \"What's This?\" help mode which is part of NanoEngineer-1's online help system, and provides users with information about the functionality and usage of a particular command button or widget. </p>""") return def hideTopRowButtons(self, pmButtonFlags=None): """ Hides one or more top row buttons using <pmButtonFlags>. Button flags not set will cause the button to be shown if currently hidden. @param pmButtonFlags: This enumerator describes the which buttons to hide, where: - PM_DONE_BUTTON = 1 - PM_CANCEL_BUTTON = 2 - PM_RESTORE_DEFAULTS_BUTTON = 4 - PM_PREVIEW_BUTTON = 8 - PM_WHATS_THIS_BUTTON = 16 - PM_ALL_BUTTONS = 31 @type pmButtonFlags: int """ if pmButtonFlags & PM_DONE_BUTTON: self.done_btn.hide() else: self.done_btn.show() if pmButtonFlags & PM_CANCEL_BUTTON: self.cancel_btn.hide() else: self.cancel_btn.show() if pmButtonFlags & PM_RESTORE_DEFAULTS_BUTTON: self.restore_defaults_btn.hide() else: self.restore_defaults_btn.show() if pmButtonFlags & PM_PREVIEW_BUTTON: self.preview_btn.hide() else: self.preview_btn.show() if pmButtonFlags & PM_WHATS_THIS_BUTTON: self.whatsthis_btn.hide() else: self.whatsthis_btn.show() def showTopRowButtons(self, pmButtonFlags=PM_ALL_BUTTONS): """ Shows one or more top row buttons using <pmButtonFlags>. Button flags not set will cause the button to be hidden if currently displayed. @param pmButtonFlags: this enumerator describes which buttons to display, where: - PM_DONE_BUTTON = 1 - PM_CANCEL_BUTTON = 2 - PM_RESTORE_DEFAULTS_BUTTON = 4 - PM_PREVIEW_BUTTON = 8 - PM_WHATS_THIS_BUTTON = 16 - PM_ALL_BUTTONS = 31 @type pmButtonFlags: int """ self.hideTopRowButtons(pmButtonFlags ^ PM_ALL_BUTTONS) def _getHeaderTitlePalette(self): """ Return a palette for header title (text) label. """ palette = QPalette() palette.setColor(QPalette.WindowText, pmHeaderTitleColor) return palette def doneButtonClicked(self): """ Slot for the What's This button. """ self.ok_btn_clicked() def cancelButtonClicked(self): """ Slot for the What's This button. """ self.cancel_btn_clicked() def restoreDefaultsButtonClicked(self): """ Slot for "Restore Defaults" button in the Property Manager. It is called each time the button is clicked. """ for widget in self._widgetList: if isinstance(widget, PM_GroupBox): widget.restoreDefault() def previewButtonClicked(self): """ Slot for the What's This button. """ self.preview_btn_clicked() def whatsThisButtonClicked(self): """ Slot for the What's This button. """ QWhatsThis.enterWhatsThisMode()
class UserDefinedDevice(QDialog): def __init__(self, parent=None): QDialog.__init__(self, parent) self._layout = QVBoxLayout(self) self.setLayout(self._layout) self.log = QPlainTextEdit(self) self._layout.addWidget(self.log) self.log.setPlainText(_('Getting device information')+'...') self.copy = QPushButton(_('Copy to &clipboard')) self.copy.setDefault(True) self.setWindowTitle(_('User-defined device information')) self.setWindowIcon(QIcon(I('debug.png'))) self.copy.clicked.connect(self.copy_to_clipboard) self.ok = QPushButton('&OK') self.ok.setAutoDefault(False) self.ok.clicked.connect(self.accept) self.bbox = QDialogButtonBox(self) self.bbox.addButton(self.copy, QDialogButtonBox.ActionRole) self.bbox.addButton(self.ok, QDialogButtonBox.AcceptRole) self._layout.addWidget(self.bbox) self.resize(750, 500) self.bbox.setEnabled(False) QTimer.singleShot(1000, self.device_info) def device_info(self): try: from calibre.devices import device_info r = step_dialog(self.parent(), _('Device Detection'), _('Ensure your device is disconnected, then press OK')) if r: self.close() return before = device_info() r = step_dialog(self.parent(), _('Device Detection'), _('Ensure your device is connected, then press OK')) if r: self.close() return after = device_info() new_drives = after['drive_set'] - before['drive_set'] new_devices = after['device_set'] - before['device_set'] res = '' if (not iswindows or len(new_drives)) and len(new_devices) == 1: def fmtid(x): if not x.startswith('0x'): x = '0x' + x return x for d in new_devices: res = _('USB Vendor ID (in hex)') + ': ' + \ fmtid(after['device_details'][d][0]) + '\n' res += _('USB Product ID (in hex)') + ': ' + \ fmtid(after['device_details'][d][1]) + '\n' res += _('USB Revision ID (in hex)') + ': ' + \ fmtid(after['device_details'][d][2]) + '\n' if iswindows: # sort the drives by the order number for i,d in enumerate(sorted(new_drives, key=lambda x: after['drive_details'][x][0])): if i == 0: res += _('Windows main memory vendor string') + ': ' + \ after['drive_details'][d][1] + '\n' res += _('Windows main memory ID string') + ': ' + \ after['drive_details'][d][2] + '\n' else: res += _('Windows card A vendor string') + ': ' + \ after['drive_details'][d][1] + '\n' res += _('Windows card A ID string') + ': ' + \ after['drive_details'][d][2] + '\n' trailer = _( 'Copy these values to the clipboard, paste them into an ' 'editor, then enter them into the USER_DEVICE by ' 'customizing the device plugin in Preferences->Plugins. ' 'Remember to also enter the folders where you want the books to ' 'be put. You must restart calibre for your changes ' 'to take effect.\n') self.log.setPlainText(res + '\n\n' + trailer) finally: self.bbox.setEnabled(True) def copy_to_clipboard(self): QApplication.clipboard().setText(self.log.toPlainText())
class PM_Dialog( QDialog, SponsorableMixin ): """ The PM_Dialog class is the base class for Property Manager dialogs. [To make a PM class from this mixin-superclass, subclass it to customize the widget set and add behavior. You must also provide certain methods provided by GeneratorBaseClass (either by inheriting it -- not sure if superclass order matters for that -- or by defining them yourself), including ok_btn_clicked and several others, including at least some defined by SponsorableMixin (open_sponsor_homepage, setSponsor). This set of requirements may be cleaned up.] [Note: Technically, this is not a "base class" but a "mixin class".] """ headerTitleText = "" # The header title text. _widgetList = [] # A list of all group boxes in this PM dialog, # including the message group box. # (but not header, sponsor button, etc.) _groupBoxCount = 0 # Number of PM_GroupBoxes in this PM dialog. _lastGroupBox = None # The last PM_GroupBox in this PM dialog. # (i.e. the most recent PM_GroupBox added). def __init__(self, name, iconPath = "", title = "" ): """ Property Manager constructor. @param name: the name to assign the property manager dialog object. @type name: str @param iconPath: the relative path for the icon (PNG image) that appears in the header. @type iconPath: str @param title: the title that appears in the header. @type title: str """ QDialog.__init__(self) self.setObjectName(name) self._widgetList = [] # Main pallete for PropMgr. self.setPalette(QPalette(pmColor)) # Main vertical layout for PropMgr. self.vBoxLayout = QVBoxLayout(self) self.vBoxLayout.setMargin(PM_MAINVBOXLAYOUT_MARGIN) self.vBoxLayout.setSpacing(PM_MAINVBOXLAYOUT_SPACING) # Add PropMgr's header, sponsor button, top row buttons and (hidden) # message group box. self._createHeader(iconPath, title) self._createSponsorButton() self._createTopRowBtns() # Create top buttons row self.MessageGroupBox = PM_MessageGroupBox(self) # Keep the line below around; it might be useful. # I may want to use it now that I understand it. # Mark 2007-05-17. #QMetaObject.connectSlotsByName(self) self._addGroupBoxes() try: self._addWhatsThisText() except: print_compact_traceback("Error loading whatsthis text for this " \ "property manager.") try: self._addToolTipText() except: print_compact_traceback("Error loading tool tip text for this " \ "property manager.") def keyPressEvent(self, event): """ Handles keyPress event. NOTE: Subclasses should carefully override this. Note that the default implementation doesn't permit ESC key as a way to close the PM_dialog. (this is typically dsesirable for Property Managers) If any subclass need to implement the key press, they should first call this method(i.e. superclass.keyPressEvent) and then implement specific code that closed the dialog when ESC key is pressed. """ key = event.key() # Don't use ESC key to close the PM dialog. Fixes bug 2596 if key == Qt.Key_Escape: pass else: QDialog.keyPressEvent(self, event) return def _addGroupBoxes(self): """ Add various group boxes to this PM. Subclasses should override this method. """ pass def _addWhatsThisText(self): """ Add what's this text. Subclasses should override this method. """ pass def _addToolTipText(self): """ Add Tool tip text. Subclasses should override this method. """ pass def show(self): """ Shows the Property Manager. """ self.setSponsor() if not self.pw or self: self.pw = self.win.activePartWindow() self.pw.updatePropertyManagerTab(self) self.pw.pwProjectTabWidget.setCurrentIndex( self.pw.pwProjectTabWidget.indexOf(self)) # Show the default message whenever we open the Property Manager. self.MessageGroupBox.MessageTextEdit.restoreDefault() def open(self, pm): """ Closes the current property manager (if any) and opens the property manager I{pm}. @param pm: The property manager to open. @type pm: L{PM_Dialog} or QDialog (of legacy PMs) @attention: This method is a temporary workaround for "Insert > Plane". The current command should always be responsible for (re)opening its own PM via self.show(). @see: L{show()} """ if 1: commandSequencer = self.win.commandSequencer #bruce 071008 commandName = commandSequencer.currentCommand.commandName # that's an internal name, but this is just for a debug print print "PM_Dialog.open(): Reopening the PM for command:", commandName # The following line of code is buggy when you, for instance, exit a PM # and reopen the previous one. It sends the disconnect signal twice to # the PM that is just closed.So disabling this line -- Ninad 2007-12-04 ##self.close() # Just in case there is another PM open. self.pw = self.win.activePartWindow() self.pw.updatePropertyManagerTab(pm) try: pm.setSponsor() except: print """PM_Dialog.open(): pm has no attribute 'setSponsor()' ignoring.""" self.pw.pwProjectTabWidget.setCurrentIndex( self.pw.pwProjectTabWidget.indexOf(pm)) def close(self): """ Closes the Property Manager. """ if not self.pw: self.pw = self.win.activePartWindow() self.pw.pwProjectTabWidget.setCurrentIndex(0) ## try: [bruce 071018 moved this lower, since errmsg only covers attr] pmWidget = self.pw.propertyManagerScrollArea.widget() if debug_flags.atom_debug: #bruce 071018 "atom_debug fyi: %r is closing %r (can they differ?)" % \ (self, pmWidget) try: pmWidget.update_props_if_needed_before_closing except AttributeError: if 1 or debug_flags.atom_debug: msg1 = "Last PropMgr %r doesn't have method" % pmWidget msg2 = " update_props_if_needed_before_closing. That's" msg3 = " OK (for now, only implemented for Plane PM). " msg4 = "Ignoring Exception: " print_compact_traceback(msg1 + msg2 + msg3 + msg4) #bruce 071018: I'll define that method in PM_Dialog # so this message should become rare or nonexistent, # so I'll make it happen whether or not atom_debug. else: pmWidget.update_props_if_needed_before_closing() self.pw.pwProjectTabWidget.removeTab( self.pw.pwProjectTabWidget.indexOf( self.pw.propertyManagerScrollArea)) if self.pw.propertyManagerTab: self.pw.propertyManagerTab = None def update_props_if_needed_before_closing(self): # bruce 071018 default implem """ Subclasses can override this to update some cosmetic properties of their associated model objects before closing self (the Property Manager). """ pass def updateMessage(self, msg = ''): """ Updates the message box with an informative message @param msg: Message to be displayed in the Message groupbox of the property manager @type msg: string """ self.MessageGroupBox.insertHtmlMessage(msg, setAsDefault = False, minLines = 5) def _createHeader(self, iconPath, title): """ Creates the Property Manager header, which contains an icon (a QLabel with a pixmap) and white text (a QLabel with text). @param iconPath: The relative path for the icon (PNG image) that appears in the header. @type iconPath: str @param title: The title that appears in the header. @type title: str """ # Heading frame (dark gray), which contains # a pixmap and (white) heading text. self.headerFrame = QFrame(self) self.headerFrame.setFrameShape(QFrame.NoFrame) self.headerFrame.setFrameShadow(QFrame.Plain) self.headerFrame.setPalette(QPalette(pmHeaderFrameColor)) self.headerFrame.setAutoFillBackground(True) # HBox layout for heading frame, containing the pixmap # and label (title). HeaderFrameHLayout = QHBoxLayout(self.headerFrame) # 2 pixels around edges -- HeaderFrameHLayout.setMargin(PM_HEADER_FRAME_MARGIN) # 5 pixel between pixmap and label. -- HeaderFrameHLayout.setSpacing(PM_HEADER_FRAME_SPACING) # PropMgr icon. Set image by calling setHeaderIcon(). self.headerIcon = QLabel(self.headerFrame) self.headerIcon.setSizePolicy( QSizePolicy(QSizePolicy.Policy(QSizePolicy.Fixed), QSizePolicy.Policy(QSizePolicy.Fixed))) self.headerIcon.setScaledContents(True) HeaderFrameHLayout.addWidget(self.headerIcon) # PropMgr header title text (a QLabel). self.headerTitle = QLabel(self.headerFrame) headerTitlePalette = self._getHeaderTitlePalette() self.headerTitle.setPalette(headerTitlePalette) self.headerTitle.setAlignment(PM_LABEL_LEFT_ALIGNMENT) # Assign header title font. self.headerTitle.setFont(self._getHeaderFont()) HeaderFrameHLayout.addWidget(self.headerTitle) self.vBoxLayout.addWidget(self.headerFrame) # Set header icon and title text. self.setHeaderIcon(iconPath) self.setHeaderTitle(title) def _getHeaderFont(self): """ Returns the font used for the header. @return: the header font @rtype: QFont """ font = QFont() font.setFamily(PM_HEADER_FONT) font.setPointSize(PM_HEADER_FONT_POINT_SIZE) font.setBold(PM_HEADER_FONT_BOLD) return font def setHeaderTitle(self, title): """ Set the Property Manager header title to string <title>. @param title: the title to insert in the header. @type title: str """ self.headerTitleText = title self.headerTitle.setText(title) def setHeaderIcon(self, iconPath): """ Set the Property Manager header icon. @param iconPath: the relative path to the PNG file containing the icon image. @type iconPath: str """ if not iconPath: return self.headerIcon.setPixmap(getpixmap(iconPath)) def _createSponsorButton(self): """ Creates the Property Manager sponsor button, which contains a QPushButton inside of a QGridLayout inside of a QFrame. The sponsor logo image is not loaded here. """ # Sponsor button (inside a frame) self.sponsor_frame = QFrame(self) self.sponsor_frame.setFrameShape(QFrame.NoFrame) self.sponsor_frame.setFrameShadow(QFrame.Plain) SponsorFrameGrid = QGridLayout(self.sponsor_frame) SponsorFrameGrid.setMargin(PM_SPONSOR_FRAME_MARGIN) SponsorFrameGrid.setSpacing(PM_SPONSOR_FRAME_SPACING) # Has no effect. self.sponsor_btn = QPushButton(self.sponsor_frame) self.sponsor_btn.setAutoDefault(False) self.sponsor_btn.setFlat(True) self.connect(self.sponsor_btn, SIGNAL("clicked()"), self.open_sponsor_homepage) SponsorFrameGrid.addWidget(self.sponsor_btn, 0, 0, 1, 1) self.vBoxLayout.addWidget(self.sponsor_frame) button_whatsthis_widget = self.sponsor_btn #bruce 070615 bugfix -- put tooltip & whatsthis on self.sponsor_btn, # not self. # [self.sponsor_frame might be another possible place to put them.] button_whatsthis_widget.setWhatsThis("""<b>Sponsor Button</b> <p>When clicked, this sponsor logo will display a short description about a NanoEngineer-1 sponsor. This can be an official sponsor or credit given to a contributor that has helped code part or all of this command. A link is provided in the description to learn more about this sponsor.</p>""") button_whatsthis_widget.setToolTip("NanoEngineer-1 Sponsor Button") return def _createTopRowBtns(self): """ Creates the Done, Cancel, Preview, Restore Defaults and What's This buttons row at the top of the Property Manager. """ # Main "button group" widget (but it is not a QButtonGroup). self.pmTopRowBtns = QHBoxLayout() # This QHBoxLayout is (probably) not necessary. Try using just the frame # for the foundation. I think it should work. Mark 2007-05-30 # Horizontal spacer horizontalSpacer = QSpacerItem(1, 1, QSizePolicy.Expanding, QSizePolicy.Minimum) # Frame containing all the buttons. self.topRowBtnsFrame = QFrame() self.topRowBtnsFrame.setFrameShape(QFrame.NoFrame) self.topRowBtnsFrame.setFrameShadow(QFrame.Plain) # Create Hbox layout for main frame. topRowBtnsHLayout = QHBoxLayout(self.topRowBtnsFrame) topRowBtnsHLayout.setMargin(PM_TOPROWBUTTONS_MARGIN) topRowBtnsHLayout.setSpacing(PM_TOPROWBUTTONS_SPACING) topRowBtnsHLayout.addItem(horizontalSpacer) # Set button type. if 1: # Mark 2007-05-30 # Needs to be QToolButton for MacOS. Fine for Windows, too. buttonType = QToolButton # May want to use QToolButton.setAutoRaise(1) below. Mark 2007-05-29 else: buttonType = QPushButton # Do not use. # Done (OK) button. self.done_btn = buttonType(self.topRowBtnsFrame) self.done_btn.setIcon( geticon("ui/actions/Properties Manager/Done.png")) self.done_btn.setIconSize(QSize(22, 22)) self.connect(self.done_btn, SIGNAL("clicked()"), self.doneButtonClicked) self.done_btn.setToolTip("Done") topRowBtnsHLayout.addWidget(self.done_btn) # Cancel (Abort) button. self.cancel_btn = buttonType(self.topRowBtnsFrame) self.cancel_btn.setIcon( geticon("ui/actions/Properties Manager/Abort.png")) self.cancel_btn.setIconSize(QSize(22, 22)) self.connect(self.cancel_btn, SIGNAL("clicked()"), self.cancelButtonClicked) self.cancel_btn.setToolTip("Cancel") topRowBtnsHLayout.addWidget(self.cancel_btn) #@ abort_btn deprecated. We still need it because modes use it. self.abort_btn = self.cancel_btn # Restore Defaults button. self.restore_defaults_btn = buttonType(self.topRowBtnsFrame) self.restore_defaults_btn.setIcon( geticon("ui/actions/Properties Manager/Restore.png")) self.restore_defaults_btn.setIconSize(QSize(22, 22)) self.connect(self.restore_defaults_btn, SIGNAL("clicked()"), self.restoreDefaultsButtonClicked) self.restore_defaults_btn.setToolTip("Restore Defaults") topRowBtnsHLayout.addWidget(self.restore_defaults_btn) # Preview (glasses) button. self.preview_btn = buttonType(self.topRowBtnsFrame) self.preview_btn.setIcon( geticon("ui/actions/Properties Manager/Preview.png")) self.preview_btn.setIconSize(QSize(22, 22)) self.connect(self.preview_btn, SIGNAL("clicked()"), self.previewButtonClicked) self.preview_btn.setToolTip("Preview") topRowBtnsHLayout.addWidget(self.preview_btn) # What's This (?) button. self.whatsthis_btn = buttonType(self.topRowBtnsFrame) self.whatsthis_btn.setIcon( geticon("ui/actions/Properties Manager/WhatsThis.png")) self.whatsthis_btn.setIconSize(QSize(22, 22)) self.connect(self.whatsthis_btn, SIGNAL("clicked()"), self.whatsThisButtonClicked) self.whatsthis_btn.setToolTip("Enter \"What's This\" help mode") topRowBtnsHLayout.addWidget(self.whatsthis_btn) topRowBtnsHLayout.addItem(horizontalSpacer) # Create Button Row self.pmTopRowBtns.addWidget(self.topRowBtnsFrame) self.vBoxLayout.addLayout(self.pmTopRowBtns) # Add What's This for buttons. self.done_btn.setWhatsThis("""<b>Done</b> <p> <img source=\"ui/actions/Properties Manager/Done.png\"><br> Completes and/or exits the current command.</p>""") self.cancel_btn.setWhatsThis("""<b>Cancel</b> <p> <img source=\"ui/actions/Properties Manager/Abort.png\"><br> Cancels the current command.</p>""") self.restore_defaults_btn.setWhatsThis("""<b>Restore Defaults</b> <p><img source=\"ui/actions/Properties Manager/Restore.png\"><br> Restores the defaut values of the Property Manager.</p>""") self.preview_btn.setWhatsThis("""<b>Preview</b> <p> <img source=\"ui/actions/Properties Manager/Preview.png\"><br> Preview the structure based on current Property Manager settings. </p>""") self.whatsthis_btn.setWhatsThis("""<b>What's This</b> <p> <img source=\"ui/actions/Properties Manager/WhatsThis.png\"><br> This invokes \"What's This?\" help mode which is part of NanoEngineer-1's online help system, and provides users with information about the functionality and usage of a particular command button or widget. </p>""") return def hideTopRowButtons(self, pmButtonFlags = None): """ Hides one or more top row buttons using <pmButtonFlags>. Button flags not set will cause the button to be shown if currently hidden. @param pmButtonFlags: This enumerator describes the which buttons to hide, where: - PM_DONE_BUTTON = 1 - PM_CANCEL_BUTTON = 2 - PM_RESTORE_DEFAULTS_BUTTON = 4 - PM_PREVIEW_BUTTON = 8 - PM_WHATS_THIS_BUTTON = 16 - PM_ALL_BUTTONS = 31 @type pmButtonFlags: int """ if pmButtonFlags & PM_DONE_BUTTON: self.done_btn.hide() else: self.done_btn.show() if pmButtonFlags & PM_CANCEL_BUTTON: self.cancel_btn.hide() else: self.cancel_btn.show() if pmButtonFlags & PM_RESTORE_DEFAULTS_BUTTON: self.restore_defaults_btn.hide() else: self.restore_defaults_btn.show() if pmButtonFlags & PM_PREVIEW_BUTTON: self.preview_btn.hide() else: self.preview_btn.show() if pmButtonFlags & PM_WHATS_THIS_BUTTON: self.whatsthis_btn.hide() else: self.whatsthis_btn.show() def showTopRowButtons(self, pmButtonFlags = PM_ALL_BUTTONS): """ Shows one or more top row buttons using <pmButtonFlags>. Button flags not set will cause the button to be hidden if currently displayed. @param pmButtonFlags: this enumerator describes which buttons to display, where: - PM_DONE_BUTTON = 1 - PM_CANCEL_BUTTON = 2 - PM_RESTORE_DEFAULTS_BUTTON = 4 - PM_PREVIEW_BUTTON = 8 - PM_WHATS_THIS_BUTTON = 16 - PM_ALL_BUTTONS = 31 @type pmButtonFlags: int """ self.hideTopRowButtons(pmButtonFlags ^ PM_ALL_BUTTONS) def _getHeaderTitlePalette(self): """ Return a palette for header title (text) label. """ palette = QPalette() palette.setColor(QPalette.WindowText, pmHeaderTitleColor) return palette def doneButtonClicked(self): """ Slot for the What's This button. """ self.ok_btn_clicked() def cancelButtonClicked(self): """ Slot for the What's This button. """ self.cancel_btn_clicked() def restoreDefaultsButtonClicked(self): """ Slot for "Restore Defaults" button in the Property Manager. It is called each time the button is clicked. """ for widget in self._widgetList: if isinstance(widget, PM_GroupBox): widget.restoreDefault() def previewButtonClicked(self): """ Slot for the What's This button. """ self.preview_btn_clicked() def whatsThisButtonClicked(self): """ Slot for the What's This button. """ QWhatsThis.enterWhatsThisMode()