def add_new_table(self, rel, name):
import itertools
table = QTableWidget()
table.setRowCount(0)
table.setColumnCount(0)
data = itertools.chain([rel.fields], rel.content)
for row_data in data:
row = table.rowCount()
table.setColumnCount(len(row_data))
for col, text in enumerate(row_data):
item = QTableWidgetItem()
item.setText(text)
if row == 0:
table.setHorizontalHeaderItem(col, item)
else:
table.setItem(row - 1, col, item)
table.insertRow(row)
table.removeRow(table.rowCount() - 1)
self.stacked.addWidget(table)
self.stacked.setCurrentIndex(self.stacked.count() - 1)
lateral = Pireal.get_service("lateral")
lateral.add_item_list([name])
class WellLogEditDialog(QDialog):
def __init__(self, current_well_name, current_log_name):
super(WellLogEditDialog, self).__init__()
self.well = ppp.Well(
str(CONF.well_dir / ".{}".format(current_well_name)))
self.current_log_name = current_log_name
self.well_log = self.well.get_log(current_log_name)
self.resize(300, 400)
self.initUI()
self.button_box.accepted.connect(self.save_edit)
self.button_box.rejected.connect(self.close)
def initUI(self):
self.setWindowIcon(QIcon(':/icon/edit_icon'))
self.setWindowTitle("Edit Log {}".format(self.current_log_name))
self.layout = QGridLayout(self)
# add a QTableWidget
self.tableWidget = QTableWidget(self)
self.tableWidget.setColumnCount(2)
self.tableWidget.setRowCount(0)
self.tableWidget.setHorizontalHeaderItem(0, QTableWidgetItem("Depth"))
self.tableWidget.setHorizontalHeaderItem(1, QTableWidgetItem("Data"))
n = len(self.well_log.depth)
self.tableWidget.setRowCount(n)
for i, (de,
da) in enumerate(zip(self.well_log.depth, self.well_log.data)):
self.tableWidget.setItem(i, 0, QTableWidgetItem(str(de)))
self.tableWidget.setItem(i, 1, QTableWidgetItem(str(da)))
self.layout.addWidget(self.tableWidget)
# add QDialogButtonBox
self.button_box = QDialogButtonBox(self)
self.button_box.setStandardButtons(QDialogButtonBox.Save
| QDialogButtonBox.Cancel)
self.layout.addWidget(self.button_box)
def save_edit(self):
depth_tb = [float(self.tableWidget.item(irow, 0).text()) \
for irow in range(self.tableWidget.rowCount())]
data_tb = [float(self.tableWidget.item(irow, 1).text()) \
for irow in range(self.tableWidget.rowCount())]
temp_log = ppp.Log()
temp_log.depth = depth_tb
temp_log.data = data_tb
if temp_log != self.well_log:
reply = QMessageBox.question(
self, "Save",
"Log Data has been edited,\nAre you willing to save changes?",
QMessageBox.Yes, QMessageBox.Cancel)
if reply == QMessageBox.Yes:
self.well.update_log(self.current_log_name, temp_log)
self.well.save_well()
self.close()
def load_relation(self, filenames=[]):
""" Load relation from file """
import csv
from PyQt4.QtGui import QTableWidgetItem, QTableWidget
from src.core import relation
if not filenames:
native_dialog = QFileDialog.DontUseNativeDialog
directory = os.path.expanduser("~")
ffilter = settings.RFILES.split(';;')[-1]
filenames = QFileDialog.getOpenFileNames(self,
self.tr("Abrir Archivo"),
directory, ffilter,
native_dialog)
if not filenames:
return
lateral = Pireal.get_service("lateral")
for filename in filenames:
rel = relation.Relation(filename)
relation_name = os.path.splitext(os.path.basename(filename))[0]
self.table_widget.relations[relation_name] = rel
table = QTableWidget()
with open(filename, newline='') as f:
table.setRowCount(0)
table.setColumnCount(0)
csv_reader = csv.reader(f)
for row_data in csv_reader:
row = table.rowCount()
table.setColumnCount(len(row_data))
for column, data in enumerate(row_data):
item = QTableWidgetItem()
item.setText(data)
if row == 0:
table.setHorizontalHeaderItem(column, item)
else:
table.setItem(row - 1, column, item)
table.insertRow(row)
table.removeRow(table.rowCount() - 1)
self.table_widget.stacked.addWidget(table)
#FIXME: names
names = [os.path.splitext(os.path.basename(i))[0]
for i in filenames]
lateral.add_item_list(names)
lateral.show()
def add_table(self, rows, columns, name, data):
table = QTableWidget()
table.setRowCount(rows)
table.setColumnCount(columns)
for k, v in list(data.items()):
item = QTableWidgetItem()
item.setText(v)
if k[0] == 0:
table.setHorizontalHeaderItem(k[1], item)
else:
table.setItem(k[0] - 1, k[1], item)
#ntuples = " [ " + str(rows) + " ]"
#item_list = QListWidgetItem(name + ntuples)
#item_list.setTextAlignment(Qt.AlignHCenter)
#self._list_tables.addItem(item_list)
self.stacked.addWidget(table)
self.stacked.setCurrentIndex(self.stacked.count() - 1)
class Main(plugin.Plugin):
" Main Class "
def initialize(self, *args, **kwargs):
" Init Main Class "
super(Main, self).initialize(*args, **kwargs)
self.scriptPath, self.scriptArgs = "", []
self.profilerPath, self.tempPath = profilerPath, tempPath
self.output = " ERROR: FAIL: No output ! "
self.process = QProcess()
self.process.finished.connect(self.on_process_finished)
self.process.error.connect(self.on_process_error)
self.tabWidget, self.stat = QTabWidget(), QWidget()
self.tabWidget.tabCloseRequested.connect(
lambda: self.tabWidget.setTabPosition(1) if self.tabWidget.
tabPosition() == 0 else self.tabWidget.setTabPosition(0))
self.tabWidget.setStyleSheet('QTabBar{font-weight:bold;}')
self.tabWidget.setMovable(True)
self.tabWidget.setTabsClosable(True)
self.vboxlayout1 = QVBoxLayout(self.stat)
self.hboxlayout1 = QHBoxLayout()
self.filterTableLabel = QLabel("<b>Type to Search : </b>", self.stat)
self.hboxlayout1.addWidget(self.filterTableLabel)
self.filterTableLineEdit = QLineEdit(self.stat)
self.filterTableLineEdit.setPlaceholderText(' Type to Search . . . ')
self.hboxlayout1.addWidget(self.filterTableLineEdit)
self.filterHintTableLabel = QLabel(" ? ", self.stat)
self.hboxlayout1.addWidget(self.filterHintTableLabel)
self.vboxlayout1.addLayout(self.hboxlayout1)
self.tableWidget = QTableWidget(self.stat)
self.tableWidget.setAlternatingRowColors(True)
self.tableWidget.setColumnCount(8)
self.tableWidget.setRowCount(2)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(0, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(1, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(2, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(3, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(4, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(5, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(6, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(7, item)
self.tableWidget.itemDoubleClicked.connect(
self.on_tableWidget_itemDoubleClicked)
self.vboxlayout1.addWidget(self.tableWidget)
self.tabWidget.addTab(self.stat, " ? ")
self.source = QWidget()
self.gridlayout = QGridLayout(self.source)
self.scintillaWarningLabel = QLabel(
"QScintilla is not installed!. Falling back to basic text edit!.",
self.source)
self.gridlayout.addWidget(self.scintillaWarningLabel, 1, 0, 1, 2)
self.sourceTreeWidget = QTreeWidget(self.source)
self.sourceTreeWidget.setAlternatingRowColors(True)
self.sourceTreeWidget.itemActivated.connect(
self.on_sourceTreeWidget_itemActivated)
self.sourceTreeWidget.itemClicked.connect(
self.on_sourceTreeWidget_itemClicked)
self.sourceTreeWidget.itemDoubleClicked.connect(
self.on_sourceTreeWidget_itemClicked)
self.gridlayout.addWidget(self.sourceTreeWidget, 0, 0, 1, 1)
self.sourceTextEdit = QTextEdit(self.source)
self.sourceTextEdit.setReadOnly(True)
self.gridlayout.addWidget(self.sourceTextEdit, 0, 1, 1, 1)
self.tabWidget.addTab(self.source, " ? ")
self.result = QWidget()
self.vlayout = QVBoxLayout(self.result)
self.globalStatGroupBox = QGroupBox(self.result)
self.hboxlayout = QHBoxLayout(self.globalStatGroupBox)
self.totalTimeLcdNumber = QLCDNumber(self.globalStatGroupBox)
self.totalTimeLcdNumber.setSegmentStyle(QLCDNumber.Filled)
self.totalTimeLcdNumber.setNumDigits(7)
self.totalTimeLcdNumber.display(1000000)
self.totalTimeLcdNumber.setFrameShape(QFrame.StyledPanel)
self.totalTimeLcdNumber.setSizePolicy(QSizePolicy.Expanding,
QSizePolicy.Expanding)
self.hboxlayout.addWidget(self.totalTimeLcdNumber)
self.tTimeLabel = QLabel("<b>Total Time (Sec)</b>",
self.globalStatGroupBox)
self.tTimeLabel.setSizePolicy(QSizePolicy.Minimum, QSizePolicy.Minimum)
self.hboxlayout.addWidget(self.tTimeLabel)
self.numCallLcdNumber = QLCDNumber(self.globalStatGroupBox)
self.numCallLcdNumber.setNumDigits(7)
self.numCallLcdNumber.display(1000000)
self.numCallLcdNumber.setSegmentStyle(QLCDNumber.Filled)
self.numCallLcdNumber.setFrameShape(QFrame.StyledPanel)
self.numCallLcdNumber.setSizePolicy(QSizePolicy.Expanding,
QSizePolicy.Expanding)
self.hboxlayout.addWidget(self.numCallLcdNumber)
self.numCallLabel = QLabel("<b>Number of calls</b>",
self.globalStatGroupBox)
self.numCallLabel.setSizePolicy(QSizePolicy.Minimum,
QSizePolicy.Minimum)
self.hboxlayout.addWidget(self.numCallLabel)
self.primCallLcdNumber = QLCDNumber(self.globalStatGroupBox)
self.primCallLcdNumber.setSegmentStyle(QLCDNumber.Filled)
self.primCallLcdNumber.setFrameShape(QFrame.StyledPanel)
self.primCallLcdNumber.setNumDigits(7)
self.primCallLcdNumber.display(1000000)
self.primCallLcdNumber.setSizePolicy(QSizePolicy.Expanding,
QSizePolicy.Expanding)
self.hboxlayout.addWidget(self.primCallLcdNumber)
self.primCallLabel = QLabel("<b>Primitive calls (%)</b>",
self.globalStatGroupBox)
self.primCallLabel.setSizePolicy(QSizePolicy.Minimum,
QSizePolicy.Minimum)
self.hboxlayout.addWidget(self.primCallLabel)
self.vlayout.addWidget(self.globalStatGroupBox)
try:
from PyKDE4.kdeui import KRatingWidget
self.rating = KRatingWidget(self.globalStatGroupBox)
self.rating.setToolTip('Profiling Performance Rating')
except ImportError:
pass
self.tabWidget.addTab(self.result, " Get Results ! ")
self.resgraph = QWidget()
self.vlayout2 = QVBoxLayout(self.result)
self.graphz = QGroupBox(self.resgraph)
self.hboxlayout2 = QHBoxLayout(self.graphz)
try:
from PyKDE4.kdeui import KLed
KLed(self.graphz)
except ImportError:
pass
self.hboxlayout2.addWidget(
QLabel('''
Work in Progress :) Not Ready Yet'''))
self.vlayout2.addWidget(self.graphz)
self.tabWidget.addTab(self.resgraph, " Graphs and Charts ")
self.pathz = QWidget()
self.vlayout3 = QVBoxLayout(self.pathz)
self.patz = QGroupBox(self.pathz)
self.hboxlayout3 = QVBoxLayout(self.patz)
self.profilepath = QLineEdit(profilerPath)
self.getprofile = QPushButton(QIcon.fromTheme("document-open"), 'Open')
self.getprofile.setToolTip(
'Dont touch if you dont know what are doing')
self.getprofile.clicked.connect(lambda: self.profilepath.setText(
str(
QFileDialog.getOpenFileName(
self.patz, ' Open the profile.py file ',
path.expanduser("~"), ';;(profile.py)'))))
self.hboxlayout3.addWidget(
QLabel(
'<center><b>Profile.py Python Library Full Path:</b></center>')
)
self.hboxlayout3.addWidget(self.profilepath)
self.hboxlayout3.addWidget(self.getprofile)
self.argGroupBox = QGroupBox(self.pathz)
self.hbxlayout = QHBoxLayout(self.argGroupBox)
self.argLineEdit = QLineEdit(self.argGroupBox)
self.argLineEdit.setToolTip(
'Not touch if you dont know what are doing')
self.argLineEdit.setPlaceholderText(
'Dont touch if you dont know what are doing')
self.hbxlayout.addWidget(
QLabel('<b>Additional Profile Arguments:</b>'))
self.hbxlayout.addWidget(self.argLineEdit)
self.hboxlayout3.addWidget(self.argGroupBox)
self.vlayout3.addWidget(self.patz)
self.tabWidget.addTab(self.pathz, " Paths and Configs ")
self.outp = QWidget()
self.vlayout4 = QVBoxLayout(self.outp)
self.outgro = QGroupBox(self.outp)
self.outgro.setTitle(" MultiProcessing Output Logs ")
self.hboxlayout4 = QVBoxLayout(self.outgro)
self.outputlog = QTextEdit()
self.outputlog.setText('''
I do not fear computers, I fear the lack of them. -Isaac Asimov ''')
self.hboxlayout4.addWidget(self.outputlog)
self.vlayout4.addWidget(self.outgro)
self.tabWidget.addTab(self.outp, " Logs ")
self.actionNew_profiling = QAction(QIcon.fromTheme("document-new"),
'New Profiling', self)
self.actionLoad_profile = QAction(QIcon.fromTheme("document-open"),
'Open Profiling', self)
self.actionClean = QAction(QIcon.fromTheme("edit-clear"), 'Clean',
self)
self.actionClean.triggered.connect(lambda: self.clearContent)
self.actionAbout = QAction(QIcon.fromTheme("help-about"), 'About',
self)
self.actionAbout.triggered.connect(lambda: QMessageBox.about(
self.dock, __doc__, ', '.join(
(__doc__, __license__, __author__, __email__))))
self.actionSave_profile = QAction(QIcon.fromTheme("document-save"),
'Save Profiling', self)
self.actionManual = QAction(QIcon.fromTheme("help-contents"), 'Help',
self)
self.actionManual.triggered.connect(lambda: open_new_tab(
'http://docs.python.org/library/profile.html'))
self.tabWidget.setCurrentIndex(2)
self.globalStatGroupBox.setTitle("Global Statistics")
item = self.tableWidget.horizontalHeaderItem(0)
item.setText("Number of Calls")
item = self.tableWidget.horizontalHeaderItem(1)
item.setText("Total Time")
item = self.tableWidget.horizontalHeaderItem(2)
item.setText("Per Call")
item = self.tableWidget.horizontalHeaderItem(3)
item.setText("Cumulative Time")
item = self.tableWidget.horizontalHeaderItem(4)
item.setText("Per Call")
item = self.tableWidget.horizontalHeaderItem(5)
item.setText("Filename")
item = self.tableWidget.horizontalHeaderItem(6)
item.setText("Line")
item = self.tableWidget.horizontalHeaderItem(7)
item.setText("Function")
self.tabWidget.setTabText(self.tabWidget.indexOf(self.stat),
"Statistics per Function")
self.sourceTreeWidget.headerItem().setText(0, "Source files")
self.tabWidget.setTabText(self.tabWidget.indexOf(self.source),
"Sources Navigator")
#######################################################################
self.scrollable, self.dock = QScrollArea(), QDockWidget()
self.scrollable.setWidgetResizable(True)
self.scrollable.setWidget(self.tabWidget)
self.dock.setWindowTitle(__doc__)
self.dock.setStyleSheet('QDockWidget::title{text-align: center;}')
self.dock.setWidget(self.scrollable)
QToolBar(self.dock).addActions(
(self.actionNew_profiling, self.actionClean,
self.actionSave_profile, self.actionLoad_profile,
self.actionManual, self.actionAbout))
self.actionNew_profiling.triggered.connect(
self.on_actionNew_profiling_triggered)
self.actionLoad_profile.triggered.connect(
self.on_actionLoad_profile_triggered)
self.actionSave_profile.triggered.connect(
self.on_actionSave_profile_triggered)
self.locator.get_service('misc').add_widget(
self.dock, QIcon.fromTheme("document-open-recent"), __doc__)
if QSCI:
# Scintilla source editor management
self.scintillaWarningLabel.setText(' QScintilla is Ready ! ')
layout = self.source.layout()
layout.removeWidget(self.sourceTextEdit)
self.sourceTextEdit = Qsci.QsciScintilla(self.source)
layout.addWidget(self.sourceTextEdit, 0, 1)
doc = self.sourceTextEdit
doc.setLexer(Qsci.QsciLexerPython(self.sourceTextEdit))
doc.setReadOnly(True)
doc.setEdgeMode(Qsci.QsciScintilla.EdgeLine)
doc.setEdgeColumn(80)
doc.setEdgeColor(QColor("#FF0000"))
doc.setFolding(Qsci.QsciScintilla.BoxedTreeFoldStyle)
doc.setBraceMatching(Qsci.QsciScintilla.SloppyBraceMatch)
doc.setCaretLineVisible(True)
doc.setMarginLineNumbers(1, True)
doc.setMarginWidth(1, 25)
doc.setTabWidth(4)
doc.setEolMode(Qsci.QsciScintilla.EolUnix)
self.marker = {}
for color in COLORS:
mnr = doc.markerDefine(Qsci.QsciScintilla.Background)
doc.setMarkerBackgroundColor(color, mnr)
self.marker[color] = mnr
self.currentSourcePath = None
# Connect table and tree filter edit signal to unique slot
self.filterTableLineEdit.textEdited.connect(
self.on_filterLineEdit_textEdited)
# Timer to display filter hint message
self.filterHintTimer = QTimer(self)
self.filterHintTimer.setSingleShot(True)
self.filterHintTimer.timeout.connect(self.on_filterHintTimer_timeout)
# Timer to start search
self.filterSearchTimer = QTimer(self)
self.filterSearchTimer.setSingleShot(True)
self.filterSearchTimer.timeout.connect(
self.on_filterSearchTimer_timeout)
self.tabLoaded = {}
for i in range(10):
self.tabLoaded[i] = False
self.backgroundTreeMatchedItems = {}
self.resizeWidgetToContent(self.tableWidget)
def on_actionNew_profiling_triggered(self):
self.clearContent()
self.scriptPath = str(
QFileDialog.getOpenFileName(self.dock,
"Choose your script to profile",
path.expanduser("~"),
"Python (*.py *.pyw)"))
commandLine = [
self.profilerPath, "-o", self.tempPath, self.scriptPath
] + self.scriptArgs
commandLine = " ".join(commandLine)
##if self.termCheckBox.checkState() == Qt.Checked:
#termList = ["xterm", "aterm"]
#for term in termList:
#termPath = which(term)
#if termPath:
#break
#commandLine = """%s -e "%s ; echo 'Press ENTER Exit' ; read" """ \
#% (termPath, commandLine)
self.process.start(commandLine)
if not self.process.waitForStarted():
print((" ERROR: {} failed!".format(commandLine)))
return
def on_process_finished(self, exitStatus):
' whan the process end '
print((" INFO: OK: QProcess is %s" % self.process.exitCode()))
self.output = self.process.readAll().data()
if not self.output:
self.output = " ERROR: FAIL: No output ! "
self.outputlog.setText(self.output + str(self.process.exitCode()))
if path.exists(self.tempPath):
self.setStat(self.tempPath)
remove(self.tempPath)
else:
self.outputlog.setText(" ERROR: QProcess FAIL: Profiling failed.")
self.tabWidget.setCurrentIndex(2)
def on_process_error(self, error):
' when the process fail, I hope you never see this '
print(" ERROR: QProcess FAIL: Profiler Dead, wheres your God now ? ")
if error == QProcess.FailedToStart:
self.outputlog.setText(" ERROR: FAIL: Profiler execution failed ")
elif error == QProcess.Crashed:
self.outputlog.setText(" ERROR: FAIL: Profiler execution crashed ")
else:
self.outputlog.setText(" ERROR: FAIL: Profiler unknown error ")
def on_actionLoad_profile_triggered(self):
"""Load a previous profile sessions"""
statPath = str(
QFileDialog.getOpenFileName(self.dock, "Open profile dump",
path.expanduser("~"),
"Profile file (*)"))
if statPath:
self.clearContent()
print(' INFO: OK: Loading profiling from ' + statPath)
self.setStat(statPath)
def on_actionSave_profile_triggered(self):
"""Save a profile sessions"""
statPath = str(
QFileDialog.getSaveFileName(self.dock, "Save profile dump",
path.expanduser("~"),
"Profile file (*)"))
if statPath:
#TODO: handle error case and give feelback to user
print(' INFO: OK: Saving profiling to ' + statPath)
self.stat.save(statPath)
#=======================================================================#
# Common parts #
#=======================================================================#
def on_tabWidget_currentChanged(self, index):
"""slot for tab change"""
# Kill search and hint timer if running to avoid cross effect
for timer in (self.filterHintTimer, self.filterSearchTimer):
if timer.isActive():
timer.stop()
if not self.stat:
#No stat loaded, nothing to do
return
self.populateTable()
self.populateSource()
def on_filterLineEdit_textEdited(self, text):
"""slot for filter change (table or tree"""
if self.filterSearchTimer.isActive():
# Already runnning, stop it
self.filterSearchTimer.stop()
# Start timer
self.filterSearchTimer.start(300)
def on_filterHintTimer_timeout(self):
"""Timeout to warn user about text length"""
print("timeout")
tab = self.tabWidget.currentIndex()
if tab == TAB_FUNCTIONSTAT:
label = self.filterHintTableLabel
label.setText("Type > 2 characters to search")
def on_filterSearchTimer_timeout(self):
"""timeout to start search"""
tab = self.tabWidget.currentIndex()
if tab == TAB_FUNCTIONSTAT:
text = self.filterTableLineEdit.text()
label = self.filterHintTableLabel
edit = self.filterTableLineEdit
widget = self.tableWidget
else:
print("Unknow tab for filterSearch timeout !")
print(("do search for %s" % text))
if not len(text):
# Empty keyword, just clean all
if self.filterHintTimer.isActive():
self.filterHintTimer.stop()
label.setText(" ? ")
self.warnUSer(True, edit)
self.clearSearch()
return
if len(text) < 2:
# Don't filter if text is too short and tell it to user
self.filterHintTimer.start(600)
return
else:
if self.filterHintTimer.isActive():
self.filterHintTimer.stop()
label.setText(" ? ")
# Search
self.clearSearch()
matchedItems = []
if tab == TAB_FUNCTIONSTAT:
# Find items
matchedItems = widget.findItems(text, Qt.MatchContains)
widget.setSortingEnabled(False)
matchedRows = [item.row() for item in matchedItems]
# Hide matched items
header = widget.verticalHeader()
for row in range(widget.rowCount()):
if row not in matchedRows:
header.hideSection(row)
widget.setSortingEnabled(True)
else:
print(" Unknow tab for filterSearch timeout ! ")
print(("got %s members" % len(matchedItems)))
self.warnUSer(matchedItems, edit)
self.resizeWidgetToContent(widget)
def resizeWidgetToContent(self, widget):
"""Resize all columns according to content"""
for i in range(widget.columnCount()):
widget.resizeColumnToContents(i)
def clearSearch(self):
"""Clean search result
For table, show all items
For tree, remove colored items"""
tab = self.tabWidget.currentIndex()
if tab == TAB_FUNCTIONSTAT:
header = self.tableWidget.verticalHeader()
if header.hiddenSectionCount():
for i in range(header.count()):
if header.isSectionHidden(i):
header.showSection(i)
def clearContent(self):
# Clear tabs
self.tableWidget.clearContents()
self.sourceTreeWidget.clear()
# Reset LCD numbers
for lcdNumber in (self.totalTimeLcdNumber, self.numCallLcdNumber,
self.primCallLcdNumber):
lcdNumber.display(1000000)
# Reset stat
self.pstat = None
# Disable save as menu
self.actionSave_profile.setEnabled(False)
# Mark all tabs as unloaded
for i in range(10):
self.tabLoaded[i] = False
def warnUSer(self, result, inputWidget):
palette = inputWidget.palette()
if result:
palette.setColor(QPalette.Normal, QPalette.Base,
QColor(255, 255, 255))
else:
palette.setColor(QPalette.Normal, QPalette.Base,
QColor(255, 136, 138))
inputWidget.setPalette(palette)
inputWidget.update()
def setStat(self, statPath):
self.stat = Stat(path=statPath)
# Global stat update
self.totalTimeLcdNumber.display(self.stat.getTotalTime())
self.numCallLcdNumber.display(self.stat.getCallNumber())
self.primCallLcdNumber.display(self.stat.getPrimitiveCallRatio())
# Refresh current tab
self.on_tabWidget_currentChanged(self.tabWidget.currentIndex())
# Activate save as menu
self.actionSave_profile.setEnabled(True)
try:
self.rating.setMaxRating(10)
self.rating.setRating(
int(self.stat.getPrimitiveCallRatio()) / 10 - 1)
except:
pass
#========================================================================#
# Statistics table #
#=======================================================================#
def populateTable(self):
row = 0
rowCount = self.stat.getStatNumber()
progress = QProgressDialog("Populating statistics table...", "Abort",
0, 2 * rowCount)
self.tableWidget.setSortingEnabled(False)
self.tableWidget.setRowCount(rowCount)
progress.setWindowModality(Qt.WindowModal)
for (key, value) in self.stat.getStatItems():
#ncalls
item = StatTableWidgetItem(str(value[0]))
item.setTextAlignment(Qt.AlignRight)
self.tableWidget.setItem(row, STAT_NCALLS, item)
colorTableItem(item, self.stat.getCallNumber(), value[0])
#total time
item = StatTableWidgetItem(str(value[2]))
item.setTextAlignment(Qt.AlignRight)
self.tableWidget.setItem(row, STAT_TTIME, item)
colorTableItem(item, self.stat.getTotalTime(), value[2])
#per call (total time)
if value[0] != 0:
tPerCall = str(value[2] / value[0])
cPerCall = str(value[3] / value[0])
else:
tPerCall = ""
cPerCall = ""
item = StatTableWidgetItem(tPerCall)
item.setTextAlignment(Qt.AlignRight)
self.tableWidget.setItem(row, STAT_TPERCALL, item)
colorTableItem(
item,
100.0 * self.stat.getTotalTime() / self.stat.getCallNumber(),
tPerCall)
#per call (cumulative time)
item = StatTableWidgetItem(cPerCall)
item.setTextAlignment(Qt.AlignRight)
self.tableWidget.setItem(row, STAT_CPERCALL, item)
colorTableItem(
item,
100.0 * self.stat.getTotalTime() / self.stat.getCallNumber(),
cPerCall)
#cumulative time
item = StatTableWidgetItem(str(value[3]))
item.setTextAlignment(Qt.AlignRight)
self.tableWidget.setItem(row, STAT_CTIME, item)
colorTableItem(item, self.stat.getTotalTime(), value[3])
#Filename
self.tableWidget.setItem(row, STAT_FILENAME,
StatTableWidgetItem(str(key[0])))
#Line
item = StatTableWidgetItem(str(key[1]))
item.setTextAlignment(Qt.AlignRight)
self.tableWidget.setItem(row, STAT_LINE, item)
#Function name
self.tableWidget.setItem(row, STAT_FUNCTION,
StatTableWidgetItem(str(key[2])))
row += 1
# Store it in stat hash array
self.stat.setStatLink(item, key, TAB_FUNCTIONSTAT)
progress.setValue(row)
if progress.wasCanceled():
return
for i in range(self.tableWidget.rowCount()):
progress.setValue(row + i)
for j in range(self.tableWidget.columnCount()):
item = self.tableWidget.item(i, j)
if item:
item.setFlags(Qt.ItemIsEnabled)
self.tableWidget.setSortingEnabled(True)
self.resizeWidgetToContent(self.tableWidget)
progress.setValue(2 * rowCount)
def on_tableWidget_itemDoubleClicked(self, item):
matchedItems = []
filename = str(self.tableWidget.item(item.row(), STAT_FILENAME).text())
if not filename or filename.startswith("<"):
# No source code associated, return immediatly
return
function = self.tableWidget.item(item.row(), STAT_FUNCTION).text()
line = self.tableWidget.item(item.row(), STAT_LINE).text()
self.on_tabWidget_currentChanged(TAB_SOURCE) # load source tab
function = "%s (%s)" % (function, line)
fathers = self.sourceTreeWidget.findItems(filename, Qt.MatchContains,
SOURCE_FILENAME)
print(("find %s father" % len(fathers)))
for father in fathers:
findItems(father, function, SOURCE_FILENAME, matchedItems)
print(("find %s items" % len(matchedItems)))
if matchedItems:
self.tabWidget.setCurrentIndex(TAB_SOURCE)
self.sourceTreeWidget.scrollToItem(matchedItems[0])
self.on_sourceTreeWidget_itemClicked(matchedItems[0],
SOURCE_FILENAME)
matchedItems[0].setSelected(True)
else:
print("oups, item found but cannot scroll to it !")
#=======================================================================#
# Source explorer #
#=====================================================================#
def populateSource(self):
items = {}
for stat in self.stat.getStatKeys():
source = stat[0]
function = "%s (%s)" % (stat[2], stat[1])
if source in ("", "profile") or source.startswith("<"):
continue
# Create the function child
child = QTreeWidgetItem([function])
# Store it in stat hash array
self.stat.setStatLink(child, stat, TAB_SOURCE)
if source in items:
father = items[source]
else:
# Create the father
father = QTreeWidgetItem([source])
items[source] = father
father.addChild(child)
self.sourceTreeWidget.setSortingEnabled(False)
for value in list(items.values()):
self.sourceTreeWidget.addTopLevelItem(value)
self.sourceTreeWidget.setSortingEnabled(True)
def on_sourceTreeWidget_itemActivated(self, item, column):
self.on_sourceTreeWidget_itemClicked(item, column)
def on_sourceTreeWidget_itemClicked(self, item, column):
line = 0
parent = item.parent()
if QSCI:
doc = self.sourceTextEdit
if parent:
pathz = parent.text(column)
result = match("(.*) \(([0-9]+)\)", item.text(column))
if result:
try:
function = str(result.group(1))
line = int(result.group(2))
except ValueError:
# We got garbage... falling back to line 0
pass
else:
pathz = item.text(column)
pathz = path.abspath(str(pathz))
if self.currentSourcePath != pathz:
# Need to load source
self.currentSourcePath == pathz
try:
if QSCI:
doc.clear()
doc.insert(file(pathz).read())
else:
self.sourceTextEdit.setPlainText(file(pathz).read())
except IOError:
QMessageBox.warning(self, "Error",
"Source file could not be found",
QMessageBox.Ok)
return
if QSCI:
for function, line in [(i[2], i[1])
for i in self.stat.getStatKeys()
if i[0] == pathz]:
# expr, regexp, case sensitive, whole word, wrap, forward
doc.findFirst("def", False, True, True, False, True, line,
0, True)
end, foo = doc.getCursorPosition()
time = self.stat.getStatTotalTime((pathz, line, function))
colorSource(doc, self.stat.getTotalTime(), time, line, end,
self.marker)
if QSCI:
doc.ensureLineVisible(line)
class WellMarkerDialog(QDialog):
def __init__(self, well):
super(WellMarkerDialog, self).__init__()
self.well = well
self.setupUi()
self.initUI()
self.button_box.accepted.connect(self.save_markers)
self.button_box.rejected.connect(self.close)
self.add_Button.clicked.connect(self.add_row)
self.del_Button.clicked.connect(self.del_row)
self.export_Button.clicked.connect(self.export_markers)
self.import_Button.clicked.connect(self.import_markers)
def setupUi(self):
self.resize(568, 411)
self.setWindowIcon(QIcon(':/icon/layer_icon'))
self.setWindowTitle("Edit Markers")
self.gridLayout = QGridLayout(self)
# table widget
self.tableWidget = QTableWidget(self)
self.tableWidget.setColumnCount(4)
self.tableWidget.setRowCount(0)
self.tableWidget.setHorizontalHeaderItem(0, QTableWidgetItem("Name"))
self.tableWidget.setHorizontalHeaderItem(1,
QTableWidgetItem("TVD (m)"))
self.tableWidget.setHorizontalHeaderItem(2,
QTableWidgetItem("TVDSS (m)"))
self.tableWidget.setHorizontalHeaderItem(3, QTableWidgetItem("Color"))
self.gridLayout.addWidget(self.tableWidget, 0, 0, 1, 1)
# button box
self.button_box = QDialogButtonBox(self)
self.export_Button = self.button_box.addButton(
"Export", QDialogButtonBox.ResetRole)
self.import_Button = self.button_box.addButton(
"Import", QDialogButtonBox.ResetRole)
self.add_Button = self.button_box.addButton("Add",
QDialogButtonBox.ResetRole)
self.del_Button = self.button_box.addButton("Del",
QDialogButtonBox.ResetRole)
self.button_box.setStandardButtons(QDialogButtonBox.Save
| QDialogButtonBox.Cancel)
self.gridLayout.addWidget(self.button_box, 1, 0, 1, 1)
def initUI(self):
self.populate_marker_table()
def populate_marker_table(self):
try:
markers_dict = self.well.params["horizon"]
for mark in markers_dict.keys():
self.tableWidget.insertRow(0)
self.tableWidget.setItem(0, 0, QTableWidgetItem(mark))
self.tableWidget.setItem(
0, 1, QTableWidgetItem(str(markers_dict[mark])))
self.tableWidget.setItem(
0, 2, QTableWidgetItem(str(markers_dict[mark])))
self.tableWidget.sortItems(0, Qt.AscendingOrder)
except KeyError:
pass
def add_row(self):
self.tableWidget.insertRow(self.tableWidget.rowCount())
def del_row(self):
self.tableWidget.removeRow(self.tableWidget.currentRow())
def save_markers(self):
l_names = [str(self.tableWidget.item(irow, 0).text()) \
for irow in range(self.tableWidget.rowCount())]
l_md = [float(self.tableWidget.item(irow, 1).text()) \
for irow in range(self.tableWidget.rowCount())]
new_dict = OrderedDict([(a, b) for a, b in zip(l_names, l_md)])
if self.well.params['horizon'] != new_dict:
respond = QMessageBox.question(
self, "Save Markers", "Sure to save changes?",
QMessageBox.Save | QMessageBox.Cancel)
if respond == QMessageBox.Save:
self.well.params['horizon'] = new_dict
self.well.save_params()
self.close()
def export_markers(self):
file_path = str(QFileDialog.getSaveFileName(self, "Save Markers"))
l_names = [str(self.tableWidget.item(irow, 0).text()) \
for irow in range(self.tableWidget.rowCount())]
l_md = [float(self.tableWidget.item(irow, 1).text()) \
for irow in range(self.tableWidget.rowCount())]
df = pd.DataFrame({"name": l_names, "MD(m)": l_md})
df.to_csv(file_path, sep='\t', columns=["name", "MD(m)"], index=False)
QMessageBox.information(self, "Export Markers", "Succeed!")
def import_markers(self):
read_csv_dialog = ReadCsvDialog()
read_csv_dialog.setWindowIcon(QIcon(':/icon/layer_icon'))
read_csv_dialog.setWindowTitle("Open Markers File")
read_csv_dialog.label.setText("Read Makers from File")
read_csv_dialog.exec_()
class ImportDataDlg(QDialog):
__isJy = False # 数据校验成功的标志
__mlist = [] # 定义一个列表用于保存从excel表中取出的数据
def __init__(self, iface, parent=None, impType=ImpDateType.SITEANDCELL):
super(ImportDataDlg, self).__init__()
self.iface = iface
self.parent = parent
self.impType = impType
self.initView()
def initView(self):
if self.impType == ImpDateType.SERVINGCELL:
self.setWindowTitle(u'相邻小区数据导入')
else:
self.setWindowTitle(u'基站和小区数据导入')
self.setWindowIcon(QIcon('images/logo.png'))
self.resize(620, 480)
# 数据表格
self.tableWidget = QTableWidget(self)
self.tableWidget.setAlternatingRowColors(True)
self.tableWidget.setRowCount(7)
# 设置当前Table不能编辑
self.tableWidget.setEditTriggers(QAbstractItemView.NoEditTriggers)
# 初始化表格上下文菜单
self.initTableContextMenu()
# 初始化表头
self.initTableHeader()
# 导入出错列表
self.listWidget = QListWidget(self)
# 按钮组
impBtn = QPushButton(u"导入EXCEL表", self)
yzBtn = QPushButton(u"数据检验", self)
impdateBtn = QPushButton(u"导入数据", self)
btnVBox = QVBoxLayout()
btnVBox.addWidget(impBtn)
btnVBox.addWidget(yzBtn)
btnVBox.addWidget(impdateBtn)
# 错误列表与按钮组
hBox = QHBoxLayout()
hBox.setMargin(20)
hBox.addWidget(self.listWidget)
hBox.addLayout(btnVBox)
self.mbar = QStatusBar(self)
self.mbar.showMessage(u'准备就绪...')
self.maction = QToolBar(self)
self.editAction = QAction(u'编辑', self.maction)
self.editAction.setCheckable(True)
self.combox = QComboBox(self)
self.combox.addItems(HeadsConfig.ImpExcelName)
self.maction.addWidget(self.combox)
self.maction.addAction(self.editAction)
vBox = QVBoxLayout()
vBox.addWidget(self.maction)
vBox.addWidget(self.tableWidget)
vBox.addLayout(hBox)
vBox.addWidget(self.mbar)
vBox.setStretchFactor(self.tableWidget, 9)
vBox.setStretchFactor(hBox, 5)
vBox.setStretchFactor(self.mbar, 1)
self.setLayout(vBox)
QObject.connect(impBtn, SIGNAL('clicked()'), self.impClick)
QObject.connect(yzBtn, SIGNAL('clicked()'), self.yzClick)
QObject.connect(impdateBtn, SIGNAL('clicked()'), self.impdateClick)
QObject.connect(self.editAction, SIGNAL('triggered()'), self.editClick)
QObject.connect(self.combox, SIGNAL('currentIndexChanged(int)'),
self.comboxChange)
self.listWidget.doubleClicked.connect(self.mlistClicked)
# self.connect(self.listWidget, SIGNAL("itemDoubleClicked (QListWidgetItem)"), self.mlistClicked)
def initTableContextMenu(self):
self.tableWidget.setContextMenuPolicy(Qt.CustomContextMenu)
self.popMenu = QMenu(self.tableWidget)
delAction = QAction(u'删除', self) # 删除
self.popMenu.addAction(delAction)
# 设置表格可以双击修改数据
def setEditTriggers(self, isTrigger):
if isTrigger:
self.tableWidget.setEditTriggers(QAbstractItemView.DoubleClicked)
else:
self.tableWidget.setEditTriggers(QAbstractItemView.NoEditTriggers)
# 提供给外部修改状态栏消息
def setStatusBarMsg(self, msg):
self.mbar.showMessage(msg)
# 选框改变时，清空当前表格的全部内容，包括表格头
def updateType(self, mtype):
self.impType = mtype
self.tableWidget.clear() # 清空表格所有内容
self.initTableHeader()
# 初始化表格的每个Item
def initTable(self, mlist):
self.tableWidget.setRowCount(len(mlist))
for (i, v) in enumerate(mlist):
for (j, item) in enumerate(v):
if type(item) != str:
item = unicode(item)
if item == None:
item = u""
tabItem = QTableWidgetItem(item)
tabItem.setTextAlignment(Qt.AlignCenter)
self.tableWidget.setItem(i, j, tabItem)
# 初始化错误信息列表
def initListView(self, mlist):
for iv in mlist:
lisItm = QListWidgetItem(self.listWidget)
lisItm.setTextColor(Qt.red)
lisItm.setData(Qt.UserRole, iv)
if isinstance(iv, basestring):
# 如果错误信息是一行字符串
lisItm.setText(iv)
else:
lisItm.setText(u'第' + unicode(str(iv['row'] + 1)) + u'行，第' +
unicode(str(iv['col'] + 1)) + u'列：' + iv['msg'])
# 初始化Table的头
def initTableHeader(self):
self.heads = []
if self.impType == ImpDateType.SITEANDCELL:
# 获取当前项目图层的字段名
cell_layer = getLayerByName(u"小区", self.iface)
for head in HeadsConfig.SiteANDCellHead:
self.heads.append(head)
if len(cell_layer.pendingFields()) > 55:
for (index, field) in enumerate(cell_layer.pendingFields()):
if index > 54:
field_name = field.name().strip()
self.heads.append(field_name)
else:
self.heads = HeadsConfig.ServingCellHead
self.tableWidget.setColumnCount(len(self.heads)) # 设置表格的列数
for (i, h) in enumerate(self.heads):
tabItem = QTableWidgetItem(h)
self.tableWidget.setHorizontalHeaderItem(i, tabItem)
# 自定义为Table添加Item
def addTableItem(self, row, col, content):
tabItem = QTableWidgetItem(content)
self.tableWidget.setItem(row, col, tabItem)
# 修改Item的内容
def editTableItem(self, row, col, content):
tabItem = self.tableWidget.item(row, col)
tabItem.setText(content)
self.tableWidget.setItem(row, col, tabItem)
# 从Excel表读取数据（导入Excel表）
def impClick(self):
fileName = QFileDialog.getOpenFileName(self, u'基站小区数据导入', '/',
'Excel Files (*.xls *.xlsx)')
if fileName.strip() != "":
self.setStatusBarMsg(u'选择完毕：' + fileName)
importData = GetDataFromExcel(fileName, self.impType, self.heads)
self.__mlist = []
self.__mlist.extend(importData.getData())
self.tableWidget.clearContents()
self.listWidget.clear()
self.initTable(self.__mlist)
self.setStatusBarMsg(u'数据导入完成...')
self.__isJy = False # 导入完数据后，说明需要重新验证数据的正确性
else:
QMessageBox.information(self.parent, u"错误", u"请选中文件")
# 数据验证按钮点击事件处理
def yzClick(self):
if len(self.__mlist) > 0:
self.erlist = [] # 定义一个列表用于保存数据验证错误的数据
# 清楚全部的Item
if self.listWidget.count() > 0:
self.listWidget.clear()
# 根据tableWidget更新self.__mlist
for (r, items) in enumerate(self.__mlist):
for (v, item) in enumerate(self.__mlist[r]):
if self.tableWidget.item(r, v).text() == u"":
continue
else:
# 跟据self.__mlist[r][v]数据类型进行比对
if type(self.__mlist[r][v]) == int:
if unicode(self.__mlist[r][v]) != (
self.tableWidget.item(r, v).text()):
self.__mlist[r][v] = int(
self.tableWidget.item(r, v).text())
elif type(self.__mlist[r][v]) == float:
if unicode(self.__mlist[r][v]) != (
self.tableWidget.item(r, v).text()):
self.__mlist[r][v] = float(
self.tableWidget.item(r, v).text())
elif type(self.__mlist[r][v]) == str:
if unicode(self.__mlist[r][v]
) != self.tableWidget.item(r, v).text():
self.__mlist[r][v] = str(
self.tableWidget.item(r, v).text())
elif type(self.__mlist[r][v]) == unicode:
if (self.__mlist[r][v]) != self.tableWidget.item(
r, v).text():
self.__mlist[r][v] = self.tableWidget.item(
r, v).text()
else:
print type(self.__mlist[r][v])
# 执行数据校验函数
self.erlist = checkDataByDataType(self.__mlist, self.impType)
if len(self.erlist) > 0:
self.initListView(self.erlist)
QMessageBox.information(self.parent, u'数据校验',
u'数据校验失败，请检查数据正确性后，再导入到地图中')
self.__isJy = False
else:
QMessageBox.information(self.parent, u'数据校验', u'数据校验成功，没有错误数据')
self.__isJy = True
else:
QMessageBox.warning(self.parent, u'数据校验', u'请先导入Excel数据后再操作！')
# 导入数据到地图中
def impdateClick(self):
if self.__isJy: # 如果数据校验成功
if self.impType == ImpDateType.SITEANDCELL:
# 导入基站小区
importDataToLayer = ImportDataToLayer(self.iface, self.__mlist,
self.parent)
if importDataToLayer.importSiteAndCellData():
QMessageBox.information(self.parent, u"导入数据", u"导入数据成功！")
else:
QMessageBox.critical(self.parent, u"导入数据", u"导入数据失败！")
else:
# 导入相邻小区
importDataToLayer = ImportDataToLayer(self.iface, self.__mlist,
self.parent)
if importDataToLayer.importSCellData():
QMessageBox.information(self.parent, u"导入数据", u"导入数据成功！")
else:
QMessageBox.critical(self.parent, u"导入数据", u"导入数据失败！")
else:
QMessageBox.warning(self.parent, u'数据导入', u'请确保校验数据成功后，再导入到地图中')
# 编辑Action点击事件
def editClick(self):
self.setEditTriggers(self.editAction.isChecked())
# 错误列表双击事件处理
def mlistClicked(self, listItem):
itemData = listItem.data(Qt.UserRole)
self.tableWidget.setFocus()
self.tableWidget.setCurrentCell(itemData['row'], itemData['col'])
# 选框改变事件
def comboxChange(self, index):
self.updateType(index)
# 字段验证是否为空
def __validNull(self, name, col, row, itm, rowitm):
if itm is None or itm == '':
tmpMap = {}
tmpMap['col'] = col
tmpMap['row'] = row
tmpMap['msg'] = unicode(name) + u'不能为空'
tmpMap['item'] = rowitm
return tmpMap
else:
return None
# 导入数据线程开始信号 绑定函数
def impStart(self):
self.setStatusBarMsg(u'准备导入...')
# 导入数据线程发生异常信号 绑定函数
def impError(self, e, exception_string):
self.setStatusBarMsg(u'发生错误：' + unicode(e))
QMessageBox.warning(self.parent, u'Excel数据导入', u'发生错误：' + unicode(e))
# 导入数据线程完成信号 绑定函数
def impFinish(self, mylist):
self.__mlist = []
self.__mlist.extend(mylist)
self.mthread.quit()
self.mthread.wait()
self.mthread.deleteLater()
self.impDateThread.deleteLater()
self.tableWidget.clearContents()
self.listWidget.clear()
self.initTable(self.__mlist)
self.setStatusBarMsg(u'数据导入完成...')
self.__isJy = False # 导入完数据后，说明需要重新验证数据的正确性
# 导入数据到地图线程发生异常信号 绑定函数
def impError1(self, e, exception_string):
self.setStatusBarMsg(u"导入数据发生错误")
QMessageBox.critical(self, u'数据导入', u"发生错误：" + unicode(e))
# 导入数据到地图线程完成信号 绑定函数
def impFinish1(self, mylist):
self.threadImp.quit()
self.threadImp.wait()
self.threadImp.deleteLater()
self.impFeatureThread.deleteLater()
remsg = u'数据导入完成！'
layer = None
if self.impType == LayerType.SITE:
# remsg = u'基站' + remsg
layer = getLayerByName(u'基站', self.iface)
elif self.impType == LayerType.CELL:
# remsg = u'小区' + remsg
layer = getLayerByName(u'小区', self.iface)
else:
remsg = u'相邻小区' + remsg
layer = getLayerByName(u'相邻小区', self.iface)
self.setStatusBarMsg(remsg)
layer.updateExtents() # 更新地图数据
self.iface.actionDraw().trigger()
QMessageBox.information(self, u'数据导入', remsg)
merlist = []
for eritm in self.erlist:
merlist.append(eritm['item'])
self.tableWidget.clearContents() # 先清楚表格的内容，再将错误的行显示到表格中
self.initTable(merlist)
headers.append("year")
treeWidget.setHeaderLabels(headers)
# 添加项目
grade1 = QTreeWidgetItem(treeWidget)
grade1.setText(0,"Grade1")
student = QTreeWidgetItem(grade1)
student.setText(0,"Tom")
student.setText(1,"1986")
grade2 = QTreeWidgetItem(treeWidget, grade1)
grade2.setText(0,"Grade2")
treeWidget.show()
#********************* 3. QTableWidget ********************/
# 创建表格部件，同时指定行数和列数
tableWidget = QTableWidget(3, 2)
# 创建表格项目，并插入到指定单元
tableWidgetItem = QTableWidgetItem("qt")
tableWidget.setItem(1, 1, tableWidgetItem)
# 创建表格项目，并将它们作为标头
headerV = QTableWidgetItem("first")
tableWidget.setVerticalHeaderItem(0,headerV)
headerH = QTableWidgetItem("ID")
tableWidget.setHorizontalHeaderItem(0,headerH)
tableWidget.show()
app.exec_()
class ViewTableForm(QWidget):
def __init__(self, visualization, parent_widget=None):
QWidget.__init__(self, parent_widget)
self.inGui = False
self.widgetLayout = QVBoxLayout(self)
self.tableWidget = QTableWidget(self)
self.tableWidget.setObjectName("tableWidget")
size = QSizePolicy(QSizePolicy.Expanding, QSizePolicy.Expanding)
self.tableWidget.setSizePolicy(size)
self.widgetLayout.addWidget(self.tableWidget)
self.tabIcon = QIcon(":/Images/Images/map.png")
self.tabLabel = visualization.table_name
self.load_table(visualization=visualization)
def load_table(self, visualization, limit=10000):
storage = StorageFactory().get_storage(
type='%s_storage' % visualization.output_type,
storage_location=visualization.storage_location)
table_data = storage.load_table(table_name=visualization.table_name)
try:
primary_keys = visualization.indicators[0].primary_keys
except:
primary_keys = []
keys = primary_keys + [
key for key in table_data.keys() if key not in primary_keys
]
num_rows = min(len(table_data[keys[0]]), limit)
num_cols = len(keys)
self.tableWidget.clear()
self.tableWidget.setColumnCount(num_cols)
self.tableWidget.setRowCount(num_rows)
j = 0
for key in keys:
col = QTableWidgetItem()
col.setText(QString(key))
self.tableWidget.setHorizontalHeaderItem(j, col)
j += 1
self.tableWidget.resizeColumnsToContents()
order = sorted(enumerate(table_data[keys[0]]), lambda (i, v),
(j, v2): int(v * 100) - int(v2 * 100))
for i, (idx, v) in enumerate(order):
row = QTableWidgetItem()
self.tableWidget.setVerticalHeaderItem(i, row)
j = 0
for key in keys:
item = QTableWidgetItem()
item.setText(QString(str(table_data[key][idx])))
self.tableWidget.setItem(i, j, item)
j += 1
if i > limit:
msg = 'The table %s has been truncated to %i rows because of memory limitations.' % (
visualization.table_name, limit)
detailed_msg = '<qt>To view the full results, open the following file:<br><br><small>%s</small></qt>' % visualization.get_file_path(
)
MessageBox.warning(mainwindow=self,
text=msg,
detailed_text=detailed_msg)
break
#self.tableWidget.resizeRowsToContents()
def removeElement(self):
return True
class Main(plugin.Plugin):
" Main Class "
def initialize(self, *args, **kwargs):
" Init Main Class "
super(Main, self).initialize(*args, **kwargs)
self.scriptPath, self.scriptArgs = "", []
self.profilerPath, self.tempPath = profilerPath, tempPath
self.output = " ERROR: FAIL: No output ! "
self.process = QProcess()
self.process.finished.connect(self.on_process_finished)
self.process.error.connect(self.on_process_error)
self.tabWidget, self.stat = QTabWidget(), QWidget()
self.tabWidget.tabCloseRequested.connect(lambda:
self.tabWidget.setTabPosition(1)
if self.tabWidget.tabPosition() == 0
else self.tabWidget.setTabPosition(0))
self.tabWidget.setStyleSheet('QTabBar{font-weight:bold;}')
self.tabWidget.setMovable(True)
self.tabWidget.setTabsClosable(True)
self.vboxlayout1 = QVBoxLayout(self.stat)
self.hboxlayout1 = QHBoxLayout()
self.filterTableLabel = QLabel("<b>Type to Search : </b>", self.stat)
self.hboxlayout1.addWidget(self.filterTableLabel)
self.filterTableLineEdit = QLineEdit(self.stat)
self.filterTableLineEdit.setPlaceholderText(' Type to Search . . . ')
self.hboxlayout1.addWidget(self.filterTableLineEdit)
self.filterHintTableLabel = QLabel(" ? ", self.stat)
self.hboxlayout1.addWidget(self.filterHintTableLabel)
self.vboxlayout1.addLayout(self.hboxlayout1)
self.tableWidget = QTableWidget(self.stat)
self.tableWidget.setAlternatingRowColors(True)
self.tableWidget.setColumnCount(8)
self.tableWidget.setRowCount(2)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(0, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(1, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(2, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(3, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(4, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(5, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(6, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(7, item)
self.tableWidget.itemDoubleClicked.connect(
self.on_tableWidget_itemDoubleClicked)
self.vboxlayout1.addWidget(self.tableWidget)
self.tabWidget.addTab(self.stat, " ? ")
self.source = QWidget()
self.gridlayout = QGridLayout(self.source)
self.scintillaWarningLabel = QLabel(
"QScintilla is not installed!. Falling back to basic text edit!.",
self.source)
self.gridlayout.addWidget(self.scintillaWarningLabel, 1, 0, 1, 2)
self.sourceTreeWidget = QTreeWidget(self.source)
self.sourceTreeWidget.setAlternatingRowColors(True)
self.sourceTreeWidget.itemActivated.connect(
self.on_sourceTreeWidget_itemActivated)
self.sourceTreeWidget.itemClicked.connect(
self.on_sourceTreeWidget_itemClicked)
self.sourceTreeWidget.itemDoubleClicked.connect(
self.on_sourceTreeWidget_itemClicked)
self.gridlayout.addWidget(self.sourceTreeWidget, 0, 0, 1, 1)
self.sourceTextEdit = QTextEdit(self.source)
self.sourceTextEdit.setReadOnly(True)
self.gridlayout.addWidget(self.sourceTextEdit, 0, 1, 1, 1)
self.tabWidget.addTab(self.source, " ? ")
self.result = QWidget()
self.vlayout = QVBoxLayout(self.result)
self.globalStatGroupBox = QGroupBox(self.result)
self.hboxlayout = QHBoxLayout(self.globalStatGroupBox)
self.totalTimeLcdNumber = QLCDNumber(self.globalStatGroupBox)
self.totalTimeLcdNumber.setSegmentStyle(QLCDNumber.Filled)
self.totalTimeLcdNumber.setNumDigits(7)
self.totalTimeLcdNumber.display(1000000)
self.totalTimeLcdNumber.setFrameShape(QFrame.StyledPanel)
self.totalTimeLcdNumber.setSizePolicy(QSizePolicy.Expanding,
QSizePolicy.Expanding)
self.hboxlayout.addWidget(self.totalTimeLcdNumber)
self.tTimeLabel = QLabel("<b>Total Time (Sec)</b>",
self.globalStatGroupBox)
self.tTimeLabel.setSizePolicy(QSizePolicy.Minimum,
QSizePolicy.Minimum)
self.hboxlayout.addWidget(self.tTimeLabel)
self.numCallLcdNumber = QLCDNumber(self.globalStatGroupBox)
self.numCallLcdNumber.setNumDigits(7)
self.numCallLcdNumber.display(1000000)
self.numCallLcdNumber.setSegmentStyle(QLCDNumber.Filled)
self.numCallLcdNumber.setFrameShape(QFrame.StyledPanel)
self.numCallLcdNumber.setSizePolicy(QSizePolicy.Expanding,
QSizePolicy.Expanding)
self.hboxlayout.addWidget(self.numCallLcdNumber)
self.numCallLabel = QLabel("<b>Number of calls</b>",
self.globalStatGroupBox)
self.numCallLabel.setSizePolicy(QSizePolicy.Minimum,
QSizePolicy.Minimum)
self.hboxlayout.addWidget(self.numCallLabel)
self.primCallLcdNumber = QLCDNumber(self.globalStatGroupBox)
self.primCallLcdNumber.setSegmentStyle(QLCDNumber.Filled)
self.primCallLcdNumber.setFrameShape(QFrame.StyledPanel)
self.primCallLcdNumber.setNumDigits(7)
self.primCallLcdNumber.display(1000000)
self.primCallLcdNumber.setSizePolicy(QSizePolicy.Expanding,
QSizePolicy.Expanding)
self.hboxlayout.addWidget(self.primCallLcdNumber)
self.primCallLabel = QLabel("<b>Primitive calls (%)</b>",
self.globalStatGroupBox)
self.primCallLabel.setSizePolicy(QSizePolicy.Minimum,
QSizePolicy.Minimum)
self.hboxlayout.addWidget(self.primCallLabel)
self.vlayout.addWidget(self.globalStatGroupBox)
try:
from PyKDE4.kdeui import KRatingWidget
self.rating = KRatingWidget(self.globalStatGroupBox)
self.rating.setToolTip('Profiling Performance Rating')
except ImportError:
pass
self.tabWidget.addTab(self.result, " Get Results ! ")
self.resgraph = QWidget()
self.vlayout2 = QVBoxLayout(self.result)
self.graphz = QGroupBox(self.resgraph)
self.hboxlayout2 = QHBoxLayout(self.graphz)
try:
from PyKDE4.kdeui import KLed
KLed(self.graphz)
except ImportError:
pass
self.hboxlayout2.addWidget(QLabel('''
Work in Progress :) Not Ready Yet'''))
self.vlayout2.addWidget(self.graphz)
self.tabWidget.addTab(self.resgraph, " Graphs and Charts ")
self.pathz = QWidget()
self.vlayout3 = QVBoxLayout(self.pathz)
self.patz = QGroupBox(self.pathz)
self.hboxlayout3 = QVBoxLayout(self.patz)
self.profilepath = QLineEdit(profilerPath)
self.getprofile = QPushButton(QIcon.fromTheme("document-open"), 'Open')
self.getprofile.setToolTip('Dont touch if you dont know what are doing')
self.getprofile.clicked.connect(lambda: self.profilepath.setText(str(
QFileDialog.getOpenFileName(self.patz, ' Open the profile.py file ',
path.expanduser("~"), ';;(profile.py)'))))
self.hboxlayout3.addWidget(QLabel(
'<center><b>Profile.py Python Library Full Path:</b></center>'))
self.hboxlayout3.addWidget(self.profilepath)
self.hboxlayout3.addWidget(self.getprofile)
self.argGroupBox = QGroupBox(self.pathz)
self.hbxlayout = QHBoxLayout(self.argGroupBox)
self.argLineEdit = QLineEdit(self.argGroupBox)
self.argLineEdit.setToolTip('Not touch if you dont know what are doing')
self.argLineEdit.setPlaceholderText(
'Dont touch if you dont know what are doing')
self.hbxlayout.addWidget(QLabel('<b>Additional Profile Arguments:</b>'))
self.hbxlayout.addWidget(self.argLineEdit)
self.hboxlayout3.addWidget(self.argGroupBox)
self.vlayout3.addWidget(self.patz)
self.tabWidget.addTab(self.pathz, " Paths and Configs ")
self.outp = QWidget()
self.vlayout4 = QVBoxLayout(self.outp)
self.outgro = QGroupBox(self.outp)
self.outgro.setTitle(" MultiProcessing Output Logs ")
self.hboxlayout4 = QVBoxLayout(self.outgro)
self.outputlog = QTextEdit()
self.outputlog.setText('''
I do not fear computers, I fear the lack of them. -Isaac Asimov ''')
self.hboxlayout4.addWidget(self.outputlog)
self.vlayout4.addWidget(self.outgro)
self.tabWidget.addTab(self.outp, " Logs ")
self.actionNew_profiling = QAction(QIcon.fromTheme("document-new"),
'New Profiling', self)
self.actionLoad_profile = QAction(QIcon.fromTheme("document-open"),
'Open Profiling', self)
self.actionClean = QAction(QIcon.fromTheme("edit-clear"), 'Clean', self)
self.actionClean.triggered.connect(lambda: self.clearContent)
self.actionAbout = QAction(QIcon.fromTheme("help-about"), 'About', self)
self.actionAbout.triggered.connect(lambda: QMessageBox.about(self.dock,
__doc__, ', '.join((__doc__, __license__, __author__, __email__))))
self.actionSave_profile = QAction(QIcon.fromTheme("document-save"),
'Save Profiling', self)
self.actionManual = QAction(QIcon.fromTheme("help-contents"),
'Help', self)
self.actionManual.triggered.connect(lambda:
open_new_tab('http://docs.python.org/library/profile.html'))
self.tabWidget.setCurrentIndex(2)
self.globalStatGroupBox.setTitle("Global Statistics")
item = self.tableWidget.horizontalHeaderItem(0)
item.setText("Number of Calls")
item = self.tableWidget.horizontalHeaderItem(1)
item.setText("Total Time")
item = self.tableWidget.horizontalHeaderItem(2)
item.setText("Per Call")
item = self.tableWidget.horizontalHeaderItem(3)
item.setText("Cumulative Time")
item = self.tableWidget.horizontalHeaderItem(4)
item.setText("Per Call")
item = self.tableWidget.horizontalHeaderItem(5)
item.setText("Filename")
item = self.tableWidget.horizontalHeaderItem(6)
item.setText("Line")
item = self.tableWidget.horizontalHeaderItem(7)
item.setText("Function")
self.tabWidget.setTabText(self.tabWidget.indexOf(self.stat),
"Statistics per Function")
self.sourceTreeWidget.headerItem().setText(0, "Source files")
self.tabWidget.setTabText(self.tabWidget.indexOf(self.source),
"Sources Navigator")
#######################################################################
self.scrollable, self.dock = QScrollArea(), QDockWidget()
self.scrollable.setWidgetResizable(True)
self.scrollable.setWidget(self.tabWidget)
self.dock.setWindowTitle(__doc__)
self.dock.setStyleSheet('QDockWidget::title{text-align: center;}')
self.dock.setWidget(self.scrollable)
QToolBar(self.dock).addActions((self.actionNew_profiling,
self.actionClean, self.actionSave_profile, self.actionLoad_profile,
self.actionManual, self.actionAbout))
self.actionNew_profiling.triggered.connect(
self.on_actionNew_profiling_triggered)
self.actionLoad_profile.triggered.connect(
self.on_actionLoad_profile_triggered)
self.actionSave_profile.triggered.connect(
self.on_actionSave_profile_triggered)
self.locator.get_service('misc').add_widget(self.dock,
QIcon.fromTheme("document-open-recent"), __doc__)
if QSCI:
# Scintilla source editor management
self.scintillaWarningLabel.setText(' QScintilla is Ready ! ')
layout = self.source.layout()
layout.removeWidget(self.sourceTextEdit)
self.sourceTextEdit = Qsci.QsciScintilla(self.source)
layout.addWidget(self.sourceTextEdit, 0, 1)
doc = self.sourceTextEdit
doc.setLexer(Qsci.QsciLexerPython(self.sourceTextEdit))
doc.setReadOnly(True)
doc.setEdgeMode(Qsci.QsciScintilla.EdgeLine)
doc.setEdgeColumn(80)
doc.setEdgeColor(QColor("#FF0000"))
doc.setFolding(Qsci.QsciScintilla.BoxedTreeFoldStyle)
doc.setBraceMatching(Qsci.QsciScintilla.SloppyBraceMatch)
doc.setCaretLineVisible(True)
doc.setMarginLineNumbers(1, True)
doc.setMarginWidth(1, 25)
doc.setTabWidth(4)
doc.setEolMode(Qsci.QsciScintilla.EolUnix)
self.marker = {}
for color in COLORS:
mnr = doc.markerDefine(Qsci.QsciScintilla.Background)
doc.setMarkerBackgroundColor(color, mnr)
self.marker[color] = mnr
self.currentSourcePath = None
# Connect table and tree filter edit signal to unique slot
self.filterTableLineEdit.textEdited.connect(
self.on_filterLineEdit_textEdited)
# Timer to display filter hint message
self.filterHintTimer = QTimer(self)
self.filterHintTimer.setSingleShot(True)
self.filterHintTimer.timeout.connect(self.on_filterHintTimer_timeout)
# Timer to start search
self.filterSearchTimer = QTimer(self)
self.filterSearchTimer.setSingleShot(True)
self.filterSearchTimer.timeout.connect(
self.on_filterSearchTimer_timeout)
self.tabLoaded = {}
for i in range(10):
self.tabLoaded[i] = False
self.backgroundTreeMatchedItems = {}
self.resizeWidgetToContent(self.tableWidget)
def on_actionNew_profiling_triggered(self):
self.clearContent()
self.scriptPath = str(QFileDialog.getOpenFileName(self.dock,
"Choose your script to profile", path.expanduser("~"),
"Python (*.py *.pyw)"))
commandLine = [self.profilerPath, "-o", self.tempPath,
self.scriptPath] + self.scriptArgs
commandLine = " ".join(commandLine)
##if self.termCheckBox.checkState() == Qt.Checked:
#termList = ["xterm", "aterm"]
#for term in termList:
#termPath = which(term)
#if termPath:
#break
#commandLine = """%s -e "%s ; echo 'Press ENTER Exit' ; read" """ \
#% (termPath, commandLine)
self.process.start(commandLine)
if not self.process.waitForStarted():
print((" ERROR: {} failed!".format(commandLine)))
return
def on_process_finished(self, exitStatus):
' whan the process end '
print((" INFO: OK: QProcess is %s" % self.process.exitCode()))
self.output = self.process.readAll().data()
if not self.output:
self.output = " ERROR: FAIL: No output ! "
self.outputlog.setText(self.output + str(self.process.exitCode()))
if path.exists(self.tempPath):
self.setStat(self.tempPath)
remove(self.tempPath)
else:
self.outputlog.setText(" ERROR: QProcess FAIL: Profiling failed.")
self.tabWidget.setCurrentIndex(2)
def on_process_error(self, error):
' when the process fail, I hope you never see this '
print(" ERROR: QProcess FAIL: Profiler Dead, wheres your God now ? ")
if error == QProcess.FailedToStart:
self.outputlog.setText(" ERROR: FAIL: Profiler execution failed ")
elif error == QProcess.Crashed:
self.outputlog.setText(" ERROR: FAIL: Profiler execution crashed ")
else:
self.outputlog.setText(" ERROR: FAIL: Profiler unknown error ")
def on_actionLoad_profile_triggered(self):
"""Load a previous profile sessions"""
statPath = str(QFileDialog.getOpenFileName(self.dock,
"Open profile dump", path.expanduser("~"), "Profile file (*)"))
if statPath:
self.clearContent()
print(' INFO: OK: Loading profiling from ' + statPath)
self.setStat(statPath)
def on_actionSave_profile_triggered(self):
"""Save a profile sessions"""
statPath = str(QFileDialog.getSaveFileName(self.dock,
"Save profile dump", path.expanduser("~"), "Profile file (*)"))
if statPath:
#TODO: handle error case and give feelback to user
print(' INFO: OK: Saving profiling to ' + statPath)
self.stat.save(statPath)
#=======================================================================#
# Common parts #
#=======================================================================#
def on_tabWidget_currentChanged(self, index):
"""slot for tab change"""
# Kill search and hint timer if running to avoid cross effect
for timer in (self.filterHintTimer, self.filterSearchTimer):
if timer.isActive():
timer.stop()
if not self.stat:
#No stat loaded, nothing to do
return
self.populateTable()
self.populateSource()
def on_filterLineEdit_textEdited(self, text):
"""slot for filter change (table or tree"""
if self.filterSearchTimer.isActive():
# Already runnning, stop it
self.filterSearchTimer.stop()
# Start timer
self.filterSearchTimer.start(300)
def on_filterHintTimer_timeout(self):
"""Timeout to warn user about text length"""
print("timeout")
tab = self.tabWidget.currentIndex()
if tab == TAB_FUNCTIONSTAT:
label = self.filterHintTableLabel
label.setText("Type > 2 characters to search")
def on_filterSearchTimer_timeout(self):
"""timeout to start search"""
tab = self.tabWidget.currentIndex()
if tab == TAB_FUNCTIONSTAT:
text = self.filterTableLineEdit.text()
label = self.filterHintTableLabel
edit = self.filterTableLineEdit
widget = self.tableWidget
else:
print("Unknow tab for filterSearch timeout !")
print(("do search for %s" % text))
if not len(text):
# Empty keyword, just clean all
if self.filterHintTimer.isActive():
self.filterHintTimer.stop()
label.setText(" ? ")
self.warnUSer(True, edit)
self.clearSearch()
return
if len(text) < 2:
# Don't filter if text is too short and tell it to user
self.filterHintTimer.start(600)
return
else:
if self.filterHintTimer.isActive():
self.filterHintTimer.stop()
label.setText(" ? ")
# Search
self.clearSearch()
matchedItems = []
if tab == TAB_FUNCTIONSTAT:
# Find items
matchedItems = widget.findItems(text, Qt.MatchContains)
widget.setSortingEnabled(False)
matchedRows = [item.row() for item in matchedItems]
# Hide matched items
header = widget.verticalHeader()
for row in range(widget.rowCount()):
if row not in matchedRows:
header.hideSection(row)
widget.setSortingEnabled(True)
else:
print(" Unknow tab for filterSearch timeout ! ")
print(("got %s members" % len(matchedItems)))
self.warnUSer(matchedItems, edit)
self.resizeWidgetToContent(widget)
def resizeWidgetToContent(self, widget):
"""Resize all columns according to content"""
for i in range(widget.columnCount()):
widget.resizeColumnToContents(i)
def clearSearch(self):
"""Clean search result
For table, show all items
For tree, remove colored items"""
tab = self.tabWidget.currentIndex()
if tab == TAB_FUNCTIONSTAT:
header = self.tableWidget.verticalHeader()
if header.hiddenSectionCount():
for i in range(header.count()):
if header.isSectionHidden(i):
header.showSection(i)
def clearContent(self):
# Clear tabs
self.tableWidget.clearContents()
self.sourceTreeWidget.clear()
# Reset LCD numbers
for lcdNumber in (self.totalTimeLcdNumber, self.numCallLcdNumber,
self.primCallLcdNumber):
lcdNumber.display(1000000)
# Reset stat
self.pstat = None
# Disable save as menu
self.actionSave_profile.setEnabled(False)
# Mark all tabs as unloaded
for i in range(10):
self.tabLoaded[i] = False
def warnUSer(self, result, inputWidget):
palette = inputWidget.palette()
if result:
palette.setColor(QPalette.Normal, QPalette.Base,
QColor(255, 255, 255))
else:
palette.setColor(QPalette.Normal, QPalette.Base,
QColor(255, 136, 138))
inputWidget.setPalette(palette)
inputWidget.update()
def setStat(self, statPath):
self.stat = Stat(path=statPath)
# Global stat update
self.totalTimeLcdNumber.display(self.stat.getTotalTime())
self.numCallLcdNumber.display(self.stat.getCallNumber())
self.primCallLcdNumber.display(self.stat.getPrimitiveCallRatio())
# Refresh current tab
self.on_tabWidget_currentChanged(self.tabWidget.currentIndex())
# Activate save as menu
self.actionSave_profile.setEnabled(True)
try:
self.rating.setMaxRating(10)
self.rating.setRating(
int(self.stat.getPrimitiveCallRatio()) / 10 - 1)
except:
pass
#========================================================================#
# Statistics table #
#=======================================================================#
def populateTable(self):
row = 0
rowCount = self.stat.getStatNumber()
progress = QProgressDialog("Populating statistics table...",
"Abort", 0, 2 * rowCount)
self.tableWidget.setSortingEnabled(False)
self.tableWidget.setRowCount(rowCount)
progress.setWindowModality(Qt.WindowModal)
for (key, value) in self.stat.getStatItems():
#ncalls
item = StatTableWidgetItem(str(value[0]))
item.setTextAlignment(Qt.AlignRight)
self.tableWidget.setItem(row, STAT_NCALLS, item)
colorTableItem(item, self.stat.getCallNumber(), value[0])
#total time
item = StatTableWidgetItem(str(value[2]))
item.setTextAlignment(Qt.AlignRight)
self.tableWidget.setItem(row, STAT_TTIME, item)
colorTableItem(item, self.stat.getTotalTime(), value[2])
#per call (total time)
if value[0] != 0:
tPerCall = str(value[2] / value[0])
cPerCall = str(value[3] / value[0])
else:
tPerCall = ""
cPerCall = ""
item = StatTableWidgetItem(tPerCall)
item.setTextAlignment(Qt.AlignRight)
self.tableWidget.setItem(row, STAT_TPERCALL, item)
colorTableItem(item, 100.0 * self.stat.getTotalTime() /
self.stat.getCallNumber(), tPerCall)
#per call (cumulative time)
item = StatTableWidgetItem(cPerCall)
item.setTextAlignment(Qt.AlignRight)
self.tableWidget.setItem(row, STAT_CPERCALL, item)
colorTableItem(item, 100.0 * self.stat.getTotalTime() /
self.stat.getCallNumber(), cPerCall)
#cumulative time
item = StatTableWidgetItem(str(value[3]))
item.setTextAlignment(Qt.AlignRight)
self.tableWidget.setItem(row, STAT_CTIME, item)
colorTableItem(item, self.stat.getTotalTime(), value[3])
#Filename
self.tableWidget.setItem(row, STAT_FILENAME,
StatTableWidgetItem(str(key[0])))
#Line
item = StatTableWidgetItem(str(key[1]))
item.setTextAlignment(Qt.AlignRight)
self.tableWidget.setItem(row, STAT_LINE, item)
#Function name
self.tableWidget.setItem(row, STAT_FUNCTION,
StatTableWidgetItem(str(key[2])))
row += 1
# Store it in stat hash array
self.stat.setStatLink(item, key, TAB_FUNCTIONSTAT)
progress.setValue(row)
if progress.wasCanceled():
return
for i in range(self.tableWidget.rowCount()):
progress.setValue(row + i)
for j in range(self.tableWidget.columnCount()):
item = self.tableWidget.item(i, j)
if item:
item.setFlags(Qt.ItemIsEnabled)
self.tableWidget.setSortingEnabled(True)
self.resizeWidgetToContent(self.tableWidget)
progress.setValue(2 * rowCount)
def on_tableWidget_itemDoubleClicked(self, item):
matchedItems = []
filename = str(self.tableWidget.item(item.row(), STAT_FILENAME).text())
if not filename or filename.startswith("<"):
# No source code associated, return immediatly
return
function = self.tableWidget.item(item.row(), STAT_FUNCTION).text()
line = self.tableWidget.item(item.row(), STAT_LINE).text()
self.on_tabWidget_currentChanged(TAB_SOURCE) # load source tab
function = "%s (%s)" % (function, line)
fathers = self.sourceTreeWidget.findItems(filename, Qt.MatchContains,
SOURCE_FILENAME)
print(("find %s father" % len(fathers)))
for father in fathers:
findItems(father, function, SOURCE_FILENAME, matchedItems)
print(("find %s items" % len(matchedItems)))
if matchedItems:
self.tabWidget.setCurrentIndex(TAB_SOURCE)
self.sourceTreeWidget.scrollToItem(matchedItems[0])
self.on_sourceTreeWidget_itemClicked(matchedItems[0],
SOURCE_FILENAME)
matchedItems[0].setSelected(True)
else:
print("oups, item found but cannot scroll to it !")
#=======================================================================#
# Source explorer #
#=====================================================================#
def populateSource(self):
items = {}
for stat in self.stat.getStatKeys():
source = stat[0]
function = "%s (%s)" % (stat[2], stat[1])
if source in ("", "profile") or source.startswith("<"):
continue
# Create the function child
child = QTreeWidgetItem([function])
# Store it in stat hash array
self.stat.setStatLink(child, stat, TAB_SOURCE)
if source in items:
father = items[source]
else:
# Create the father
father = QTreeWidgetItem([source])
items[source] = father
father.addChild(child)
self.sourceTreeWidget.setSortingEnabled(False)
for value in list(items.values()):
self.sourceTreeWidget.addTopLevelItem(value)
self.sourceTreeWidget.setSortingEnabled(True)
def on_sourceTreeWidget_itemActivated(self, item, column):
self.on_sourceTreeWidget_itemClicked(item, column)
def on_sourceTreeWidget_itemClicked(self, item, column):
line = 0
parent = item.parent()
if QSCI:
doc = self.sourceTextEdit
if parent:
pathz = parent.text(column)
result = match("(.*) \(([0-9]+)\)", item.text(column))
if result:
try:
function = str(result.group(1))
line = int(result.group(2))
except ValueError:
# We got garbage... falling back to line 0
pass
else:
pathz = item.text(column)
pathz = path.abspath(str(pathz))
if self.currentSourcePath != pathz:
# Need to load source
self.currentSourcePath == pathz
try:
if QSCI:
doc.clear()
doc.insert(file(pathz).read())
else:
self.sourceTextEdit.setPlainText(file(pathz).read())
except IOError:
QMessageBox.warning(self,
"Error", "Source file could not be found",
QMessageBox.Ok)
return
if QSCI:
for function, line in [(i[2], i[1]
) for i in self.stat.getStatKeys() if i[0] == pathz]:
# expr, regexp, case sensitive, whole word, wrap, forward
doc.findFirst("def", False, True, True, False, True, line,
0, True)
end, foo = doc.getCursorPosition()
time = self.stat.getStatTotalTime((pathz, line, function))
colorSource(doc, self.stat.getTotalTime(), time, line, end,
self.marker)
if QSCI:
doc.ensureLineVisible(line)
class K800IRec(QWidget, mfso):
def __init__(self):
mfso.__init__(self, "K800i-Recover")
self.name = "K800i-Recover"
self.icon = None
self.__disown__()
def start(self, args):
self.vfs = vfs.vfs()
self.dumpnumber = 1
try:
self.nor = args['nor'].value()
self.nand = args['nand'].value()
except IndexError:
return
try:
self.spareSize = args["spare-size"].value()
except IndexError:
self.spareSize = 16
try:
self.pageSize = args["page-size"].value()
except IndexError:
self.pageSize = 512
self.k800n = Node("k800-base")
self.k800n.__disown__()
self.boot = SEBootBlock(self.nor, self.pageSize)
self.blockSize = self.boot.blockSize
self.nandClean = SpareNode(self, self.nand, "nandfs", self.pageSize,
self.spareSize, self.k800n)
self.norFs = NorFs(self, self.k800n, self.nor, "norfs", self.boot)
self.fullFs = FullFs(self, self.k800n, self.norFs, self.nandClean,
"fullfs", self.boot)
self.gdfs = GDFS(self, self.k800n, self.nor, "gdfs", self.boot)
self.firmware = Firmware(self, self.k800n, self.nor, "firmware",
self.boot.norfsoffset)
self.tables = Tables(self.fullFs, self.blockSize)
self.registerTree(self.nand, self.k800n)
def createDump(self):
text, ok = QInputDialog.getText(self, "Create dump", "dump name:",
QLineEdit.Normal,
"k800-restore-" + str(self.dumpnumber))
if ok and text != "":
if (self.vfs.getnode(self.nand.absolute() + "/" +
str(text)) == None):
self.dumpnumber += 1
newroot = Node(str(text))
newroot.__disown__()
for id in range(0, len(self.tables.tablesIdWriteMap) - 1):
write = int(
str(self.gtable.cellWidget(id, 0).currentText()), 16)
self.tables.map[id] = self.tables.tablesIdWriteMap[id][
write]
virtual = VirtualMap(self, newroot, self.fullFs, self.tables,
"virtual", self.blockSize)
separt = SEPartitionBlock(virtual, self.boot.partitionblock,
self.blockSize)
self.createPart(separt, newroot, virtual)
self.registerTree(self.nand, newroot)
else:
box = QMessageBox(QMessageBox.Warning, "Error",
"Error node already exists",
QMessageBox.NoButton, self)
box.exec_()
self.createDump()
def createPart(self, separt, newroot, virtual):
for part in separt.partTable:
if part.start > 0:
p = Partition(self, newroot, virtual, part, self.blockSize)
def g_display(self):
QWidget.__init__(self, None)
self.layout = QVBoxLayout(self)
self.hlayout = QSplitter(self)
self.layout.insertWidget(0, self.hlayout)
self.layout.setStretchFactor(self.hlayout, 1)
self.gTable()
self.viewTable()
self.button = QPushButton("&Create dump")
self.connect(self.button, SIGNAL("clicked()"), self.createDump)
self.layout.addWidget(self.button)
def viewTable(self):
self.vtable = QTableWidget()
self.vtable.setColumnCount(20)
self.vtable.setRowCount(48)
self.hlayout.addWidget(self.vtable)
def viewTableUpdate(self, id):
write = int(str(self.gtable.cellWidget(id, 0).currentText()), 16)
t = self.tables.tablesIdWriteMap[id][write]
l = t.blockList
for x in xrange(0, len(t.blockList[0])):
block = t.blockList[0][x]
c = ((x) % 20)
r = ((x) / 20)
item = QTableWidgetItem(QString(hex(block)))
tipBlock = (id * 960) + x
item.setToolTip(QString(hex(tipBlock)))
item.setFlags(Qt.ItemIsSelectable | Qt.ItemIsEnabled)
self.vtable.setItem(r, c, item)
def gTable(self):
self.gtable = QTableWidget()
self.gtable.setColumnCount(1)
self.gtable.setRowCount(len(self.tables.tablesIdWriteMap))
self.gtable.setHorizontalHeaderItem(
0, QTableWidgetItem(QString("version")))
self.hlayout.addWidget(self.gtable)
self.sigMapper = QSignalMapper(self)
for id in self.tables.tablesIdWriteMap:
wlist = self.tables.tablesIdWriteMap[id]
cbox = QComboBox(self.gtable)
self.connect(cbox, SIGNAL("activated(QString)"), self.sigMapper,
SLOT("map()"))
self.sigMapper.setMapping(cbox, id)
l = []
for write in wlist:
l.append(write)
l.sort()
l.reverse()
for write in l:
cbox.addItem(QString(hex(write)))
self.gtable.setCellWidget(id, 0, cbox)
self.gtable.setVerticalHeaderItem(
id, QTableWidgetItem(QString(hex(id))))
self.connect(self.sigMapper, SIGNAL("mapped(int)"),
self.viewTableUpdate)
self.gtable.setMaximumWidth(
self.gtable.columnWidth(0) +
self.gtable.verticalHeader().sectionSize(0) + 30)
def updateWidget(self):
pass
class SpreadSheet(QMainWindow):
dateFormats = ["dd/M/yyyy", "yyyy/M/dd", "dd.MM.yyyy"]
currentDateFormat = dateFormats[0]
def __init__(self, rows, cols, parent = None):
super(SpreadSheet, self).__init__(parent)
self.toolBar = QToolBar()
self.addToolBar(self.toolBar)
self.formulaInput = QLineEdit()
self.cellLabel = QLabel(self.toolBar)
self.cellLabel.setMinimumSize(80, 0)
self.toolBar.addWidget(self.cellLabel)
self.toolBar.addWidget(self.formulaInput)
self.table = QTableWidget(rows, cols, self)
for c in range(cols):
character = chr(ord('A') + c)
self.table.setHorizontalHeaderItem(c, QTableWidgetItem(character))
self.table.setItemPrototype(self.table.item(rows - 1, cols - 1))
self.table.setItemDelegate(SpreadSheetDelegate(self))
self.createActions()
self.updateColor(0)
self.setupMenuBar()
self.setupContents()
self.setupContextMenu()
self.setCentralWidget(self.table)
self.statusBar()
self.table.currentItemChanged.connect(self.updateStatus)
self.table.currentItemChanged.connect(self.updateColor)
self.table.currentItemChanged.connect(self.updateLineEdit)
self.table.itemChanged.connect(self.updateStatus)
self.formulaInput.returnPressed.connect(self.returnPressed)
self.table.itemChanged.connect(self.updateLineEdit)
self.setWindowTitle("Spreadsheet")
def createActions(self):
self.cell_sumAction = QAction("Sum", self)
self.cell_sumAction.triggered.connect(self.actionSum)
self.cell_addAction = QAction("&Add", self)
self.cell_addAction.setShortcut(Qt.CTRL | Qt.Key_Plus)
self.cell_addAction.triggered.connect(self.actionAdd)
self.cell_subAction = QAction("&Subtract", self)
self.cell_subAction.setShortcut(Qt.CTRL | Qt.Key_Minus)
self.cell_subAction.triggered.connect(self.actionSubtract)
self.cell_mulAction = QAction("&Multiply", self)
self.cell_mulAction.setShortcut(Qt.CTRL | Qt.Key_multiply)
self.cell_mulAction.triggered.connect(self.actionMultiply)
self.cell_divAction = QAction("&Divide", self)
self.cell_divAction.setShortcut(Qt.CTRL | Qt.Key_division)
self.cell_divAction.triggered.connect(self.actionDivide)
self.fontAction = QAction("Font...", self)
self.fontAction.setShortcut(Qt.CTRL | Qt.Key_F)
self.fontAction.triggered.connect(self.selectFont)
self.colorAction = QAction(QIcon(QPixmap(16, 16)), "Background &Color...", self)
self.colorAction.triggered.connect(self.selectColor)
self.clearAction = QAction("Clear", self)
self.clearAction.setShortcut(Qt.Key_Delete)
self.clearAction.triggered.connect(self.clear)
self.aboutSpreadSheet = QAction("About Spreadsheet", self)
self.aboutSpreadSheet.triggered.connect(self.showAbout)
self.exitAction = QAction("E&xit", self)
self.exitAction.setShortcut(QKeySequence.Quit)
self.exitAction.triggered.connect(QApplication.instance().quit)
self.printAction = QAction("&Print", self)
self.printAction.setShortcut(QKeySequence.Print)
self.printAction.triggered.connect(self.print_)
self.firstSeparator = QAction(self)
self.firstSeparator.setSeparator(True)
self.secondSeparator = QAction(self)
self.secondSeparator.setSeparator(True)
def setupMenuBar(self):
self.fileMenu = self.menuBar().addMenu("&File")
self.dateFormatMenu = self.fileMenu.addMenu("&Date format")
self.dateFormatGroup = QActionGroup(self)
for f in self.dateFormats:
action = QAction(f, self, checkable=True,
triggered=self.changeDateFormat)
self.dateFormatGroup.addAction(action)
self.dateFormatMenu.addAction(action)
if f == self.currentDateFormat:
action.setChecked(True)
self.fileMenu.addAction(self.printAction)
self.fileMenu.addAction(self.exitAction)
self.cellMenu = self.menuBar().addMenu("&Cell")
self.cellMenu.addAction(self.cell_addAction)
self.cellMenu.addAction(self.cell_subAction)
self.cellMenu.addAction(self.cell_mulAction)
self.cellMenu.addAction(self.cell_divAction)
self.cellMenu.addAction(self.cell_sumAction)
self.cellMenu.addSeparator()
self.cellMenu.addAction(self.colorAction)
self.cellMenu.addAction(self.fontAction)
self.menuBar().addSeparator()
self.aboutMenu = self.menuBar().addMenu("&Help")
self.aboutMenu.addAction(self.aboutSpreadSheet)
def changeDateFormat(self):
action = self.sender()
oldFormat = self.currentDateFormat
newFormat = self.currentDateFormat = action.text()
for row in range(self.table.rowCount()):
item = self.table.item(row, 1)
date = QDate.fromString(item.text(), oldFormat)
item.setText(date.toString(newFormat))
def updateStatus(self, item):
if item and item == self.table.currentItem():
self.statusBar().showMessage(item.data(Qt.StatusTipRole).toString(), 1000)
self.cellLabel.setText("Cell: (%s)" % encode_pos(self.table.row(item),
self.table.column(item)))
def updateColor(self, item):
pixmap = QPixmap(16, 16)
color = QColor()
if item:
color = item.backgroundColor()
if not color.isValid():
color = self.palette().base().color()
painter = QPainter(pixmap)
painter.fillRect(0, 0, 16, 16, color)
lighter = color.lighter()
painter.setPen(lighter)
# light frame
painter.drawPolyline(QPoint(0, 15), QPoint(0, 0), QPoint(15, 0))
painter.setPen(color.darker())
# dark frame
painter.drawPolyline(QPoint(1, 15), QPoint(15, 15), QPoint(15, 1))
painter.end()
self.colorAction.setIcon(QIcon(pixmap))
def updateLineEdit(self, item):
if item != self.table.currentItem():
return
if item:
self.formulaInput.setText(item.data(Qt.EditRole).toString())
else:
self.formulaInput.clear()
def returnPressed(self):
text = self.formulaInput.text()
row = self.table.currentRow()
col = self.table.currentColumn()
item = self.table.item(row, col)
if not item:
self.table.setItem(row, col, SpreadSheetItem(text))
else:
item.setData(Qt.EditRole, text)
self.table.viewport().update()
def selectColor(self):
item = self.table.currentItem()
color = item and QColor(item.background()) or self.table.palette().base().color()
color = QColorDialog.getColor(color, self)
if not color.isValid():
return
selected = self.table.selectedItems()
if not selected:
return
for i in selected:
i and i.setBackground(color)
self.updateColor(self.table.currentItem())
def selectFont(self):
selected = self.table.selectedItems()
if not selected:
return
font, ok = QFontDialog.getFont(self.font(), self)
if not ok:
return
for i in selected:
i and i.setFont(font)
def runInputDialog(self, title, c1Text, c2Text, opText,
outText, cell1, cell2, outCell):
rows = []
cols = []
for r in range(self.table.rowCount()):
rows.append(str(r + 1))
for c in range(self.table.columnCount()):
cols.append(chr(ord('A') + c))
addDialog = QDialog(self)
addDialog.setWindowTitle(title)
group = QGroupBox(title, addDialog)
group.setMinimumSize(250, 100)
cell1Label = QLabel(c1Text, group)
cell1RowInput = QComboBox(group)
c1Row, c1Col = decode_pos(cell1)
cell1RowInput.addItems(rows)
cell1RowInput.setCurrentIndex(c1Row)
cell1ColInput = QComboBox(group)
cell1ColInput.addItems(cols)
cell1ColInput.setCurrentIndex(c1Col)
operatorLabel = QLabel(opText, group)
operatorLabel.setAlignment(Qt.AlignHCenter)
cell2Label = QLabel(c2Text, group)
cell2RowInput = QComboBox(group)
c2Row, c2Col = decode_pos(cell2)
cell2RowInput.addItems(rows)
cell2RowInput.setCurrentIndex(c2Row)
cell2ColInput = QComboBox(group)
cell2ColInput.addItems(cols)
cell2ColInput.setCurrentIndex(c2Col)
equalsLabel = QLabel("=", group)
equalsLabel.setAlignment(Qt.AlignHCenter)
outLabel = QLabel(outText, group)
outRowInput = QComboBox(group)
outRow, outCol = decode_pos(outCell)
outRowInput.addItems(rows)
outRowInput.setCurrentIndex(outRow)
outColInput = QComboBox(group)
outColInput.addItems(cols)
outColInput.setCurrentIndex(outCol)
cancelButton = QPushButton("Cancel", addDialog)
cancelButton.clicked.connect(addDialog.reject)
okButton = QPushButton("OK", addDialog)
okButton.setDefault(True)
okButton.clicked.connect(addDialog.accept)
buttonsLayout = QHBoxLayout()
buttonsLayout.addStretch(1)
buttonsLayout.addWidget(okButton)
buttonsLayout.addSpacing(10)
buttonsLayout.addWidget(cancelButton)
dialogLayout = QVBoxLayout(addDialog)
dialogLayout.addWidget(group)
dialogLayout.addStretch(1)
dialogLayout.addItem(buttonsLayout)
cell1Layout = QHBoxLayout()
cell1Layout.addWidget(cell1Label)
cell1Layout.addSpacing(10)
cell1Layout.addWidget(cell1ColInput)
cell1Layout.addSpacing(10)
cell1Layout.addWidget(cell1RowInput)
cell2Layout = QHBoxLayout()
cell2Layout.addWidget(cell2Label)
cell2Layout.addSpacing(10)
cell2Layout.addWidget(cell2ColInput)
cell2Layout.addSpacing(10)
cell2Layout.addWidget(cell2RowInput)
outLayout = QHBoxLayout()
outLayout.addWidget(outLabel)
outLayout.addSpacing(10)
outLayout.addWidget(outColInput)
outLayout.addSpacing(10)
outLayout.addWidget(outRowInput)
vLayout = QVBoxLayout(group)
vLayout.addItem(cell1Layout)
vLayout.addWidget(operatorLabel)
vLayout.addItem(cell2Layout)
vLayout.addWidget(equalsLabel)
vLayout.addStretch(1)
vLayout.addItem(outLayout)
if addDialog.exec_():
cell1 = cell1ColInput.currentText() + cell1RowInput.currentText()
cell2 = cell2ColInput.currentText() + cell2RowInput.currentText()
outCell = outColInput.currentText() + outRowInput.currentText()
return True, cell1, cell2, outCell
return False, None, None, None
def actionSum(self):
row_first = 0
row_last = 0
row_cur = 0
col_first = 0
col_last = 0
col_cur = 0
selected = self.table.selectedItems()
if selected:
first = selected[0]
last = selected[-1]
row_first = self.table.row(first)
row_last = self.table.row(last)
col_first = self.table.column(first)
col_last = self.table.column(last)
current = self.table.currentItem()
if current:
row_cur = self.table.row(current)
col_cur = self.table.column(current)
cell1 = encode_pos(row_first, col_first)
cell2 = encode_pos(row_last, col_last)
out = encode_pos(row_cur, col_cur)
ok, cell1, cell2, out = self.runInputDialog("Sum cells", "First cell:",
"Last cell:", u"\N{GREEK CAPITAL LETTER SIGMA}", "Output to:",
cell1, cell2, out)
if ok:
row, col = decode_pos(out)
self.table.item(row, col).setText("sum %s %s" % (cell1, cell2))
def actionMath_helper(self, title, op):
cell1 = "C1"
cell2 = "C2"
out = "C3"
current = self.table.currentItem()
if current:
out = encode_pos(self.table.currentRow(), self.table.currentColumn())
ok, cell1, cell2, out = self.runInputDialog(title, "Cell 1", "Cell 2",
op, "Output to:", cell1, cell2, out)
if ok:
row, col = decode_pos(out)
self.table.item(row, col).setText("%s %s %s" % (op, cell1, cell2))
def actionAdd(self):
self.actionMath_helper("Addition", "+")
def actionSubtract(self):
self.actionMath_helper("Subtraction", "-")
def actionMultiply(self):
self.actionMath_helper("Multiplication", "*")
def actionDivide(self):
self.actionMath_helper("Division", "/")
def clear(self):
for i in self.table.selectedItems():
i.setText("")
def setupContextMenu(self):
self.addAction(self.cell_addAction)
self.addAction(self.cell_subAction)
self.addAction(self.cell_mulAction)
self.addAction(self.cell_divAction)
self.addAction(self.cell_sumAction)
self.addAction(self.firstSeparator)
self.addAction(self.colorAction)
self.addAction(self.fontAction)
self.addAction(self.secondSeparator)
self.addAction(self.clearAction)
self.setContextMenuPolicy(Qt.ActionsContextMenu)
def setupContents(self):
titleBackground = QColor(Qt.lightGray)
titleFont = self.table.font()
titleFont.setBold(True)
# column 0
self.table.setItem(0, 0, SpreadSheetItem("Item"))
self.table.item(0, 0).setBackground(titleBackground)
self.table.item(0, 0).setToolTip("This column shows the purchased item/service")
self.table.item(0, 0).setFont(titleFont)
self.table.setItem(1, 0, SpreadSheetItem("AirportBus"))
self.table.setItem(2, 0, SpreadSheetItem("Flight (Munich)"))
self.table.setItem(3, 0, SpreadSheetItem("Lunch"))
self.table.setItem(4, 0, SpreadSheetItem("Flight (LA)"))
self.table.setItem(5, 0, SpreadSheetItem("Taxi"))
self.table.setItem(6, 0, SpreadSheetItem("Dinner"))
self.table.setItem(7, 0, SpreadSheetItem("Hotel"))
self.table.setItem(8, 0, SpreadSheetItem("Flight (Oslo)"))
self.table.setItem(9, 0, SpreadSheetItem("Total:"))
self.table.item(9, 0).setFont(titleFont)
self.table.item(9, 0).setBackground(Qt.lightGray)
# column 1
self.table.setItem(0, 1, SpreadSheetItem("Date"))
self.table.item(0, 1).setBackground(titleBackground)
self.table.item(0, 1).setToolTip("This column shows the purchase date, double click to change")
self.table.item(0, 1).setFont(titleFont)
self.table.setItem(1, 1, SpreadSheetItem("15/6/2006"))
self.table.setItem(2, 1, SpreadSheetItem("15/6/2006"))
self.table.setItem(3, 1, SpreadSheetItem("15/6/2006"))
self.table.setItem(4, 1, SpreadSheetItem("21/5/2006"))
self.table.setItem(5, 1, SpreadSheetItem("16/6/2006"))
self.table.setItem(6, 1, SpreadSheetItem("16/6/2006"))
self.table.setItem(7, 1, SpreadSheetItem("16/6/2006"))
self.table.setItem(8, 1, SpreadSheetItem("18/6/2006"))
self.table.setItem(9, 1, SpreadSheetItem())
self.table.item(9, 1).setBackground(Qt.lightGray)
# column 2
self.table.setItem(0, 2, SpreadSheetItem("Price"))
self.table.item(0, 2).setBackground(titleBackground)
self.table.item(0, 2).setToolTip("This column shows the price of the purchase")
self.table.item(0, 2).setFont(titleFont)
self.table.setItem(1, 2, SpreadSheetItem("150"))
self.table.setItem(2, 2, SpreadSheetItem("2350"))
self.table.setItem(3, 2, SpreadSheetItem("-14"))
self.table.setItem(4, 2, SpreadSheetItem("980"))
self.table.setItem(5, 2, SpreadSheetItem("5"))
self.table.setItem(6, 2, SpreadSheetItem("120"))
self.table.setItem(7, 2, SpreadSheetItem("300"))
self.table.setItem(8, 2, SpreadSheetItem("1240"))
self.table.setItem(9, 2, SpreadSheetItem())
self.table.item(9, 2).setBackground(Qt.lightGray)
# column 3
self.table.setItem(0, 3, SpreadSheetItem("Currency"))
self.table.item(0, 3).setBackgroundColor(titleBackground)
self.table.item(0, 3).setToolTip("This column shows the currency")
self.table.item(0, 3).setFont(titleFont)
self.table.setItem(1, 3, SpreadSheetItem("NOK"))
self.table.setItem(2, 3, SpreadSheetItem("NOK"))
self.table.setItem(3, 3, SpreadSheetItem("EUR"))
self.table.setItem(4, 3, SpreadSheetItem("EUR"))
self.table.setItem(5, 3, SpreadSheetItem("USD"))
self.table.setItem(6, 3, SpreadSheetItem("USD"))
self.table.setItem(7, 3, SpreadSheetItem("USD"))
self.table.setItem(8, 3, SpreadSheetItem("USD"))
self.table.setItem(9, 3, SpreadSheetItem())
self.table.item(9,3).setBackground(Qt.lightGray)
# column 4
self.table.setItem(0, 4, SpreadSheetItem("Ex. Rate"))
self.table.item(0, 4).setBackground(titleBackground)
self.table.item(0, 4).setToolTip("This column shows the exchange rate to NOK")
self.table.item(0, 4).setFont(titleFont)
self.table.setItem(1, 4, SpreadSheetItem("1"))
self.table.setItem(2, 4, SpreadSheetItem("1"))
self.table.setItem(3, 4, SpreadSheetItem("8"))
self.table.setItem(4, 4, SpreadSheetItem("8"))
self.table.setItem(5, 4, SpreadSheetItem("7"))
self.table.setItem(6, 4, SpreadSheetItem("7"))
self.table.setItem(7, 4, SpreadSheetItem("7"))
self.table.setItem(8, 4, SpreadSheetItem("7"))
self.table.setItem(9, 4, SpreadSheetItem())
self.table.item(9,4).setBackground(Qt.lightGray)
# column 5
self.table.setItem(0, 5, SpreadSheetItem("NOK"))
self.table.item(0, 5).setBackground(titleBackground)
self.table.item(0, 5).setToolTip("This column shows the expenses in NOK")
self.table.item(0, 5).setFont(titleFont)
self.table.setItem(1, 5, SpreadSheetItem("* C2 E2"))
self.table.setItem(2, 5, SpreadSheetItem("* C3 E3"))
self.table.setItem(3, 5, SpreadSheetItem("* C4 E4"))
self.table.setItem(4, 5, SpreadSheetItem("* C5 E5"))
self.table.setItem(5, 5, SpreadSheetItem("* C6 E6"))
self.table.setItem(6, 5, SpreadSheetItem("* C7 E7"))
self.table.setItem(7, 5, SpreadSheetItem("* C8 E8"))
self.table.setItem(8, 5, SpreadSheetItem("* C9 E9"))
self.table.setItem(9, 5, SpreadSheetItem("sum F2 F9"))
self.table.item(9,5).setBackground(Qt.lightGray)
def showAbout(self):
QMessageBox.about(self, "About Spreadsheet", """
<HTML>
<p><b>This demo shows use of <c>QTableWidget</c> with custom handling for
individual cells.</b></p>
<p>Using a customized table item we make it possible to have dynamic
output in different cells. The content that is implemented for this
particular demo is:
<ul>
<li>Adding two cells.</li>
<li>Subtracting one cell from another.</li>
<li>Multiplying two cells.</li>
<li>Dividing one cell with another.</li>
<li>Summing the contents of an arbitrary number of cells.</li>
</HTML>
""")
def print_(self):
pass
class OptimizateNewSiteUI(QDialog):
def __init__(self, iface, parent=None):
super(OptimizateNewSiteUI, self).__init__()
self.iface = iface
self.parent = parent
self.initUI()
# 初始化界面
def initUI(self):
self.setWindowTitle(u'自动规划基站优化')
self.setWindowIcon(QIcon('images/logo.png'))
self.resize(600, 300)
self.setWindowFlags(Qt.WindowMinMaxButtonsHint)
self.initView()
def initView(self):
# 数据表格
self.tableWidget = QTableWidget(self)
self.tableWidget.setAlternatingRowColors(True)
self.tableWidget.setRowCount(7)
# 设置当前Table不能编辑
self.tableWidget.setEditTriggers(QAbstractItemView.NoEditTriggers)
# 初始化表格上下文菜单
self.initTableContextMenu()
self.initTableHeader()
# 定义按钮
impBtn = QPushButton(u"导入EXCEL表", self)
self.connect(impBtn, SIGNAL('clicked()'), self.impData)
startBtn = QPushButton(u"开始合并", self)
self.connect(startBtn, SIGNAL('clicked()'), self.mergeJSite)
#布局
hbox = QHBoxLayout()
hbox.addWidget(impBtn)
hbox.addWidget(startBtn)
vbox = QVBoxLayout()
vbox.addWidget(self.tableWidget)
vbox.addLayout(hbox)
self.setLayout(vbox)
# 判断是否已有规划基站结果
layer = getLayerByName(u'规划基站结果', self.iface)
if layer:
data_list = []
for feature in layer.getFeatures():
temp_list = []
for value in feature.attributes():
temp_list.append(value)
data_list.append(temp_list)
del temp_list
self.initTable(data_list)
self.__mlist = data_list
def initTableContextMenu(self):
self.tableWidget.setContextMenuPolicy(Qt.CustomContextMenu)
self.popMenu = QMenu(self.tableWidget)
delAction = QAction(u'删除', self) # 删除
self.popMenu.addAction(delAction)
# 初始化Table的头
def initTableHeader(self):
self.heads = []
self.heads = MergeSiteHead
self.tableWidget.setColumnCount(len(self.heads)) # 设置表格的列数
for (i, h) in enumerate(self.heads):
tabItem = QTableWidgetItem(h)
self.tableWidget.setHorizontalHeaderItem(i, tabItem)
# 导入Excel表数据
def impData(self):
fileName = QFileDialog.getOpenFileName(self, u'数据导入', '/',
'Excel Files (*.xls *.xlsx)')
if fileName != None and fileName != '':
self.impType = ExcelType.MERGESITE
getDataFromExcel = GetDataFromExcel(fileName, self.impType)
datas_list = getDataFromExcel.getData()
self.impFinish(datas_list)
# 导入数据完成绑定函数
def impFinish(self, mylist):
self.__mlist = []
self.__mlist.extend(mylist)
self.tableWidget.clearContents()
self.initTable(self.__mlist)
# 初始化表格的每个Item
def initTable(self, mlist):
self.tableWidget.setRowCount(len(mlist))
for (i, v) in enumerate(mlist):
for (j, item) in enumerate(v):
if type(item) != str:
item = unicode(item)
if item == None:
item = ''
tabItem = QTableWidgetItem(item)
tabItem.setTextAlignment(Qt.AlignCenter)
self.tableWidget.setItem(i, j, tabItem)
# 开始运行
def mergeJSite(self):
self.accept()
merge = OptimizateNewSite(self.__mlist, self)
merge.calculationResult.connect(self.calculationFinish)
merge.run()
def calculationFinish(self, merge_result):
self.setResultLayer(merge_result)
fileName = QFileDialog.getSaveFileName(self, u'合并结果导出到 ...', '/',
'Excel File(*.xls *.xlsx)')
if fileName:
self.sphead = [u'规划基站名称', u'经度', u'纬度', u'区域类型', u"平均距离"]
for i in range(6): # 根据输入的参数增加表头
self.sphead.append(u'基站名称')
self.sphead.append(u'距离')
self.sphead.append(u'经度')
self.sphead.append(u'纬度')
layer = getLayerByName(u"基站合并结果", self.iface)
if not layer:
QMessageBox.critical(self, u"错误", u"找不到基站合并结果图层")
exportData = ExportData(self.iface, self)
if exportData.exportDataToExcel(layer, fileName):
QMessageBox.information(self, u"成功", u"数据导出成功！")
else:
QMessageBox.critical(self, u"错误", u"数据导出失败！")
else:
self.close()
# 生成规划基站结果图层
def setResultLayer(self, result_list):
layerName = u'规划基站优化结果'
layerType = QGis.WKBPoint
project_dir = getProjectDir(self.iface)
# 先判断是否已存在规划基站结果图层
result_layer = getLayerByName(layerName, self.iface)
if result_layer:
# 清空数据
delAllFeatures(result_layer)
else:
# 删除原有图层文件
deleteShapefile(project_dir, layerName)
shapPath = os.path.join(project_dir, layerName + u".shp")
# 生成图层
fileds = self.createFields()
# 创建出Shap文件
# 数据源编码模式为GBK2312（否则中文字段会乱码）
wr = QgsVectorFileWriter(shapPath, "GBK2312", fileds, layerType,
None, "ESRI Shapefile")
# 如果保存的时候没有错误
if wr.hasError() == QgsVectorFileWriter.NoError:
pass
else:
print wr.hasError()
raise Exception, wr.errorMessage() # 发生错误，抛出异常交给外面的方法处理异常
del wr # 使添加的字段生效
result_layer = QgsVectorLayer(shapPath, layerName, 'ogr')
QgsMapLayerRegistry.instance().addMapLayer(result_layer)
# 添加数据
features_list = []
for result in result_list:
feature = createABasicPointFeature(
QgsPoint(float(result[1]), float(result[2])), result)
features_list.append(feature)
importFeaturesToLayer(result_layer, features_list)
def createFields(self):
names = PLANNINGHead
types = PLANNINGType2
lengs = PLANNINGLength
precs = PLANNINGPrec
fields = QgsFields()
for (i, itm) in enumerate(names):
cuType = types[i]
mtype = 'String'
if cuType == QVariant.Int:
mtype = 'Integer'
elif cuType == QVariant.Double:
mtype = 'Real'
field = QgsField(itm, cuType, mtype, lengs[i], precs[i])
fields.append(field)
return fields
def exportFinish(self, result):
QMessageBox.information(self, u'新建基站结果', u'数据导出到Excel表完成，请查看')
def exportError(self, e, erStr):
QMessageBox.information(self, u'新建结果', u'生成基站时，发生错误，请重试+' + erStr)
class projectsInfoWidget(infoWidget):
__mainLayout = None
__tabWidget = None
__chart = None
__table = None
__colors = [Qt.red, QColor(120, 160, 215), Qt.yellow, Qt.green, QColor(250, 125, 30), Qt.blue]
__angles = []
def __init__(self, client, parent = None):
infoWidget.__init__(self, client, parent)
self.__angles = []
self.__tabWidget = QTabWidget()
self.__mainLayout = QVBoxLayout()
self.__mainLayout.addWidget(self.__tabWidget)
self.setMainLayout(self.__mainLayout, False)
self.__chart = PieChartFrame()
self.__table = QTableWidget()
self.__table.verticalHeader().hide()
self.__table.setColumnCount(3)
hh = self.__table.horizontalHeader()
hh.setResizeMode(QHeaderView.Stretch)
#self.__table.setHeaderData(0, Qt.Horizonatal, QVariant(self.tr("Project Name")), Qt.DiaplayRole)
self.__table.setHorizontalHeaderItem(0, QTableWidgetItem(self.tr("Project Name")))
self.__table.setHorizontalHeaderItem(1, QTableWidgetItem(self.tr("Project URL")))
self.__table.setHorizontalHeaderItem(2, QTableWidgetItem(self.tr("Resource Share")))
self.__tabWidget.addTab(self.__chart, self.tr("&Resources Share"))
self.__tabWidget.addTab(self.__table, self.tr("&Projects"))
projects = client.projectState()
if not projects is None:
self.updateProjects(projects)
self.connect(client, SIGNAL("projectState(PyQt_PyObject)"), self.updateProjects)
def updateProjects(self, projects):
projects = projects['project']
#self.__chart.removeItems()
update = False
i = 0
full = 0.0
for projekt in projects:
full = full + float(projekt['resource_share'])
for i in range(len(projects)):
projekt = projects[i]
angle = int(360.0 * 16.0 * (float(projekt['resource_share']) / full))
try:
if angle != self.__angles[i]:
update = True
self.__angles[i] = angle
except IndexError:
update = True
self.__angles.append(angle)
self.__angles = self.__angles[0:len(projects)]
if update:
self.__chart.removeItems()
self.__table.setRowCount(len(projects))
for i in range(len(projects)):
#aktualizujeme tabulku
projectItem = QTableWidgetItem(projekt['project_name'])
projectItem.setFlags(Qt.ItemIsEnabled|Qt.ItemIsSelectable)
urlItem = QTableWidgetItem(projekt['master_url'])
urlItem.setFlags(Qt.ItemIsEnabled|Qt.ItemIsSelectable)
shareItem = QTableWidgetItem(str(round(float(projekt['resource_share']))))
shareItem.setFlags(Qt.ItemIsEnabled|Qt.ItemIsSelectable)
self.__table.setItem(i, 0, projectItem)
self.__table.setItem(i, 1, urlItem)
self.__table.setItem(i, 2, shareItem)
#aktualizujeme graf
projekt = projects[i]
angle = int(360.0 * 16.0 * (float(projekt['resource_share']) / full))
self.__chart.addItem(angle, projekt['project_name'], self.__colors[i])
i = i + 1
if i >= len(self.__colors):
i = 0
class ViewTableForm(QWidget):
def __init__(self, visualization, parent_widget = None):
QWidget.__init__(self, parent_widget)
self.inGui = False
self.widgetLayout = QVBoxLayout(self)
self.tableWidget = QTableWidget(self)
self.tableWidget.setObjectName("tableWidget")
size = QSizePolicy(QSizePolicy.Expanding, QSizePolicy.Expanding)
self.tableWidget.setSizePolicy(size)
self.widgetLayout.addWidget(self.tableWidget)
self.tabIcon = QIcon(":/Images/Images/map.png")
self.tabLabel = visualization.table_name
self.load_table(visualization = visualization)
def load_table(self, visualization, limit = 10000):
storage = StorageFactory().get_storage(
type = '%s_storage'%visualization.output_type,
storage_location = visualization.storage_location)
table_data = storage.load_table(
table_name = visualization.table_name)
try:
primary_keys = visualization.indicators[0].primary_keys
except:
primary_keys = []
keys = primary_keys + [key for key in table_data.keys()
if key not in primary_keys]
num_rows = min(len(table_data[keys[0]]), limit)
num_cols = len(keys)
self.tableWidget.clear()
self.tableWidget.setColumnCount(num_cols)
self.tableWidget.setRowCount(num_rows)
j = 0
for key in keys:
col = QTableWidgetItem()
col.setText(QString(key))
self.tableWidget.setHorizontalHeaderItem(j,col)
j += 1
self.tableWidget.resizeColumnsToContents()
order = sorted(enumerate(table_data[keys[0]]), lambda (i,v),(j,v2): int(v*100)-int(v2*100))
for i, (idx,v) in enumerate(order):
row = QTableWidgetItem()
self.tableWidget.setVerticalHeaderItem(i,row)
j = 0
for key in keys:
item = QTableWidgetItem()
item.setText(QString(str(table_data[key][idx])))
self.tableWidget.setItem(i,j,item)
j += 1
if i > limit:
msg = 'The table %s has been truncated to %i rows because of memory limitations.'%(visualization.table_name,limit)
detailed_msg = '<qt>To view the full results, open the following file:<br><br><small>%s</small></qt>'%visualization.get_file_path()
MessageBox.warning(mainwindow = self,
text = msg,
detailed_text = detailed_msg)
break
#self.tableWidget.resizeRowsToContents()
def removeElement(self):
return True
class K800IRec(QWidget, mfso):
def __init__(self):
mfso.__init__(self, "K800i-Recover")
self.name = "K800i-Recover"
self.icon = None
self.__disown__()
def start(self, args):
self.vfs = vfs.vfs()
self.dumpnumber = 1
try :
self.nor = args['nor'].value()
self.nand = args['nand'].value()
except IndexError:
return
try:
self.spareSize = args["spare-size"].value()
except IndexError:
self.spareSize = 16
try:
self.pageSize = args["page-size"].value()
except IndexError:
self.pageSize = 512
self.k800n = Node("k800-base")
self.k800n.__disown__()
self.boot = SEBootBlock(self.nor, self.pageSize)
self.blockSize = self.boot.blockSize
self.nandClean = SpareNode(self, self.nand, "nandfs", self.pageSize, self.spareSize, self.k800n)
self.norFs = NorFs(self, self.k800n, self.nor, "norfs", self.boot)
self.fullFs = FullFs(self, self.k800n, self.norFs, self.nandClean, "fullfs", self.boot)
self.gdfs = GDFS(self, self.k800n, self.nor, "gdfs", self.boot)
self.firmware = Firmware(self, self.k800n, self.nor, "firmware", self.boot.norfsoffset)
self.tables = Tables(self.fullFs, self.blockSize)
self.registerTree(self.nand, self.k800n)
def createDump(self):
text, ok = QInputDialog.getText(self, "Create dump", "dump name:", QLineEdit.Normal, "k800-restore-" + str(self.dumpnumber))
if ok and text != "":
if (self.vfs.getnode(self.nand.absolute() + "/" + str(text)) == None):
self.dumpnumber += 1
newroot = Node(str(text))
newroot.__disown__()
for id in range(0, len(self.tables.tablesIdWriteMap) - 1):
write = int(str(self.gtable.cellWidget(id, 0).currentText()), 16)
self.tables.map[id] = self.tables.tablesIdWriteMap[id][write]
virtual = VirtualMap(self, newroot, self.fullFs, self.tables, "virtual", self.blockSize)
separt = SEPartitionBlock(virtual, self.boot.partitionblock, self.blockSize)
self.createPart(separt, newroot, virtual)
self.registerTree(self.nand, newroot)
else :
box = QMessageBox(QMessageBox.Warning, "Error", "Error node already exists", QMessageBox.NoButton, self)
box.exec_()
self.createDump()
def createPart(self, separt, newroot, virtual):
for part in separt.partTable:
if part.start > 0:
p = Partition(self, newroot, virtual, part, self.blockSize)
def g_display(self):
QWidget.__init__(self, None)
self.layout = QVBoxLayout(self)
self.hlayout = QSplitter(self)
self.layout.insertWidget(0, self.hlayout)
self.layout.setStretchFactor(self.hlayout, 1)
self.gTable()
self.viewTable()
self.button = QPushButton("&Create dump")
self.connect(self.button, SIGNAL("clicked()"), self.createDump)
self.layout.addWidget(self.button)
def viewTable(self):
self.vtable = QTableWidget()
self.vtable.setColumnCount(20)
self.vtable.setRowCount(48)
self.hlayout.addWidget(self.vtable)
def viewTableUpdate(self, id):
write = int(str(self.gtable.cellWidget(id, 0).currentText()), 16)
t = self.tables.tablesIdWriteMap[id][write]
l = t.blockList
for x in xrange(0, len(t.blockList[0])):
block = t.blockList[0][x]
c = ((x) % 20)
r = ((x) / 20)
item = QTableWidgetItem(QString(hex(block)))
tipBlock = (id * 960) + x
item.setToolTip(QString(hex(tipBlock)))
item.setFlags(Qt.ItemIsSelectable | Qt.ItemIsEnabled)
self.vtable.setItem(r ,c, item)
def gTable(self):
self.gtable = QTableWidget()
self.gtable.setColumnCount(1)
self.gtable.setRowCount(len(self.tables.tablesIdWriteMap))
self.gtable.setHorizontalHeaderItem(0, QTableWidgetItem(QString("version")))
self.hlayout.addWidget(self.gtable)
self.sigMapper = QSignalMapper(self)
for id in self.tables.tablesIdWriteMap:
wlist = self.tables.tablesIdWriteMap[id]
cbox = QComboBox(self.gtable)
self.connect(cbox, SIGNAL("activated(QString)"), self.sigMapper, SLOT("map()"))
self.sigMapper.setMapping(cbox, id)
l = []
for write in wlist:
l.append(write)
l.sort()
l.reverse()
for write in l:
cbox.addItem(QString(hex(write)))
self.gtable.setCellWidget(id, 0, cbox)
self.gtable.setVerticalHeaderItem(id, QTableWidgetItem(QString(hex(id))))
self.connect(self.sigMapper, SIGNAL("mapped(int)"), self.viewTableUpdate)
self.gtable.setMaximumWidth(self.gtable.columnWidth(0) + self.gtable.verticalHeader().sectionSize(0) + 30)
def updateWidget(self):
pass
class SentenceFillDlg(QDialog, ui_sentencefilldlg.Ui_SentenceFillDlg):
def __init__(self, tableName, rangeValues, parent=None):
super(SentenceFillDlg, self).__init__(parent)
self.tableName = tableName
self.rangeValues = rangeValues
self.setupUi(self)
self.initUI()
def initUI(self):
fontLabel = QFont('SansSerif', 14)
self.setMinimumSize(1200, 600)
self.resize(1200, 600)
self.sentenceToFillTable = QTableWidget(5, 1, self)
self.sentenceToFillTable.setGeometry(QRect(70, 60, 800, 400))
self.sentenceToFillTable.setColumnCount(1)
item = QTableWidgetItem()
item.setText('Sentences To Match')
font = QFont()
font.setBold(True)
font.setWeight(75)
item.setFont(font)
self.sentenceToFillTable.setHorizontalHeaderItem(0, item)
self.sentenceToFillTable.resizeColumnsToContents()
self.sentenceToFillTable.horizontalHeader().setStretchLastSection(True)
self.sentenceToFillTable.verticalHeader().setStretchLastSection(True)
self.sentenceList = []
self.getSentencesFromDatabase()
# split the sentences into chunks of 5
# Map to hold the anwers
self.rightWordList = {}
self.iteration = 0
self.sentenceMasterList = []
self.sentenceSlaveList = []
if len(self.sentenceList) > 0:
for sentence in self.sentenceList:
if len(self.sentenceSlaveList) < 5:
self.sentenceSlaveList.append(sentence)
else:
self.sentenceMasterList.append(self.sentenceSlaveList)
self.sentenceSlaveList = []
self.sentenceSlaveList.append(sentence)
if len(self.sentenceSlaveList) <= 5:
self.sentenceMasterList.append(self.sentenceSlaveList)
self.maxIteration = len(self.sentenceMasterList)
## set the row height
self.tableHeightSize = 0
## Only if there is atleast one sentence fetched from the database
if len(self.sentenceList) > 0:
for index in range(0, 5):
if len(self.sentenceList[index]) < 150:
self.sentenceToFillTable.verticalHeader().resizeSection(index, 80)
self.tableHeightSize = self.tableHeightSize + 90
elif len(self.sentenceList[index]) < 200:
self.sentenceToFillTable.verticalHeader().resizeSection(index, 100)
self.tableHeightSize = self.tableHeightSize + 100
else:
self.sentenceToFillTable.verticalHeader().resizeSection(index, 120)
self.tableHeightSize = self.tableHeightSize + 120
# split words from databse into chunks of 5
self.refIteration = 0
self.refWordMasterList = []
self.refWordSlaveList = []
for wordList in self.wordMap.values():
if len(self.refWordSlaveList) < 5:
self.refWordSlaveList.append(wordList)
else:
self.refWordMasterList.append(self.refWordSlaveList)
self.refWordSlaveList = []
self.refWordSlaveList.append(wordList)
if len(self.refWordSlaveList) <= 5:
self.refWordMasterList.append(self.refWordSlaveList)
self.refMaxIteration = len(self.refWordMasterList)
self.insertSentencesInTable()
self.connect(self.sentenceToFillTable, SIGNAL("cellClicked(int, int)"), self.itemSelect)
# create next, submit and close buttons
self.nextButton = QPushButton('Next', self)
self.nextButton.move(170, 520)
self.nextButton.setEnabled(False)
self.submitButton = QPushButton('Submit', self)
self.submitButton.move(380, 520)
self.closeButton = QPushButton('Close', self)
self.closeButton.move(600, 520)
self.connect(self.closeButton, SIGNAL('clicked()'), self.closeClicked)
self.connect(self.submitButton, SIGNAL('clicked()'), self.onSubmitClicked)
self.connect(self.nextButton, SIGNAL('clicked()'), self.onNextClicked)
self.setWindowTitle('Sentence Fill')
#self.setGeometry(10, 80, 1100, 750)
def getSentencesFromDatabase(self):
self.twoTypeList = data.Data().getSentencesFromDatabase(self.tableName, self.rangeValues)
if len(self.twoTypeList) == 2:
self.sentenceList = self.twoTypeList[0]
self.wordMap = self.twoTypeList[1]
def closeClicked(self):
reply = QMessageBox.question(self,
"Fill the Sentences",
"You want to close the application",
QMessageBox.Yes | QMessageBox.No)
if reply == QMessageBox.Yes:
self.reject()
def onNextClicked(self):
if not self.iteration < self.maxIteration:
QMessageBox.information(self,
"Fill the Sentences",
"All Sentences are matched",
QMessageBox.Ok)
else:
self.sentenceToFillTable.clearContents()
## Fetch the next records
self.refIteration = self.refIteration + 1
self.rightWordList = {}
## clear the contents of the combo box
self.wordListComboBox.clear()
self.insertSentencesInTable()
# validate whether the user has matched the blanks with a value during next and submit button clicks
def onNextSubmitValidation(self):
self.textNotFilled = False
for row in range(0, len(self.currentSentenceListInTable)):
if self.sentenceToFillTable.item(row, 0).text() == self.currentSentenceListInTable[row]:
self.textNotFilled = True
if self.textNotFilled:
QMessageBox.information(self,
"Fill the sentences",
"Match all the sentences in the table",
QMessageBox.Ok)
self.nextButton.setEnabled(False)
def onSubmitClicked(self):
self.wordsMatched = True
self.allWordsMatched = True
brushRed = QBrush(QColor(255,0,0))
brushRed.setStyle(Qt.SolidPattern)
brushGreen = QBrush(QColor(0,255,0))
brushGreen.setStyle(Qt.SolidPattern)
# validate whether the user all matched the blanks with a value
#self.onNextSubmitValidation()
textNotFilled = False
for row in range(0, len(self.currentSentenceListInTable)):
if self.sentenceToFillTable.item(row, 0).text() == self.currentSentenceListInTable[row]:
textNotFilled = True
if textNotFilled:
QMessageBox.information(self,
"Fill the sentences",
"Match all the sentences in the table",
QMessageBox.Ok)
else:
splittedSentence = []
foundWordInSentence = ""
self.rightWordListCopy = self.rightWordList
for row in range(0, len(self.currentSentenceListInTable)):
sentenceFilled = str(self.sentenceToFillTable.item(row, 0).text())
newSplittedSentence = [word.strip() for word in sentenceFilled.split()]
splittedSentence = []
for word in newSplittedSentence:
match = re.search(r'\w+', word)
if match:
splittedSentence.append(str(match.group()))
wordList = self.rightWordListCopy[row]
if len(wordList) > 1:
firstWord = wordList[0].strip()
secondWord = wordList[1].strip()
if ' ' in firstWord:
for word in firstWord.split():
if word not in splittedSentence:
self.wordsMatched = False
else:
if firstWord not in splittedSentence:
self.wordsMatched = False
if self.wordsMatched: ## check is valid only if the first word is matched
if ' ' in secondWord:
for word in secondWord.split():
if word not in splittedSentence:
self.wordsMatched = False
else:
if secondWord not in splittedSentence:
self.wordsMatched = False
elif len(wordList) == 1:
word = wordList[0].strip()
if word not in splittedSentence:
self.wordsMatched = False
if self.wordsMatched:
self.sentenceToFillTable.item(row, 0).setBackground(brushGreen)
else:
self.sentenceToFillTable.item(row, 0).setBackground(brushRed)
self.allWordsMatched = False
self.wordsMatched = True
if self.allWordsMatched:
self.nextButton.setEnabled(True)
QMessageBox.information(self,
"Fill the sentences",
"All sentences are matched",
QMessageBox.Ok)
def insertSentencesInTable(self):
if self.iteration < self.maxIteration:
cellList = []
self.col = 0
self.currentSentenceListInTable = self.sentenceMasterList[self.iteration]
for sentence in self.currentSentenceListInTable:
item = QTableWidgetItem(QString(sentence))
item.setFlags(Qt.ItemFlags(Qt.ItemIsSelectable |
Qt.ItemIsEnabled))
cellList.append(item)
cellList.reverse()
for index in range(0, len(self.currentSentenceListInTable)):
self.sentenceToFillTable.setItem(index, self.col, cellList.pop())
self.sentenceToFillTable.setRowCount(len(self.sentenceMasterList[self.iteration]))
self.sentenceToFillTable.setFixedHeight(self.tableHeightSize)
# increment the count for the next button click
self.iteration = self.iteration + 1
def createComboBox(self, rowIndex):
self.xAxis = 1000
self.yAxis = 80
if self.refIteration < self.refMaxIteration:
wordListWithFiveArrays = self.refWordMasterList[self.refIteration]
requiredWordList = wordListWithFiveArrays[rowIndex]
## Create a combo box
self.wordListComboBox = QComboBox(self)
self.wordListComboBox.setGeometry(900, 80, 100, 20)
self.connect(self.wordListComboBox, SIGNAL("currentIndexChanged(int)"),
self.wordSelected)
self.wordListComboBox.show()
## save the right word
if len(requiredWordList) > 0:
if rowIndex not in self.rightWordList.keys():
if len(requiredWordList) > 0:
wordList = requiredWordList[0].split('&')
self.rightWordList[rowIndex] = wordList
## insert words in the combo box
random.shuffle(requiredWordList)
random.shuffle(requiredWordList)
self.wordListComboBox.addItem(' ')
self.wordListComboBox.addItems(requiredWordList)
def wordSelected(self):
## Avoid the blank option
if len(str(self.wordListComboBox.currentText()).strip()) > 0:
sentence = self.currentSentenceListInTable[self.selectedSentenceIndex]
splittedText = sentence.split('-')
if len(splittedText) == 2:
item = QTableWidgetItem(QString(splittedText[0] +
str(self.wordListComboBox.currentText()) + ' ' + splittedText[1].strip()))
item.setFlags(Qt.ItemFlags(Qt.ItemIsSelectable |
Qt.ItemIsEnabled))
self.sentenceToFillTable.setItem(self.selectedSentenceIndex, 0, item)
elif len(splittedText) > 2:
wordsFromCombobox = str(self.wordListComboBox.currentText()).split('&')
item = QTableWidgetItem(QString(splittedText[0] + wordsFromCombobox[0]
+ splittedText[1] + wordsFromCombobox[1] + ' ' + splittedText[2].strip()))
item.setFlags(Qt.ItemFlags(Qt.ItemIsSelectable |
Qt.ItemIsEnabled))
self.sentenceToFillTable.setItem(self.selectedSentenceIndex, 0, item)
def createIndexForWords(self):
self.indexForWords = {}
self.nextIndex = 0
for word in self.refWordListForIndex:
if self.nextIndex == 5:
break
self.indexForWords[word] = self.nextIndex
self.nextIndex = self.nextIndex + 1
def itemSelect(self,rowIndex):
self.createComboBox(rowIndex)
self.selectedSentenceIndex = rowIndex
