def occurrences_goto():
if lisp.line_number_at_pos() < 1:
lisp.forward_line(1 - lisp.line_number_at_pos())
lisp.end_of_line()
end = lisp.point()
lisp.beginning_of_line()
line = lisp.buffer_substring_no_properties(lisp.point(), end)
tokens = line.split()
semicolon_tokens = line.split(":")
project_root = lisp.rope_get_project_root()
if tokens and semicolon_tokens:
# Mark this line with an arrow
lisp('''
(remove-overlays (point-min) (point-max))
(overlay-put (make-overlay (line-beginning-position) (line-end-position))
'before-string
(propertize "A" 'display '(left-fringe right-triangle)))
''')
filename = project_root + "/" + semicolon_tokens[0]
offset = int(tokens[-1])
resource = _interface._get_resource(filename)
LispUtils().find_file(resource.real_path, other=True)
lisp.goto_char(offset + 1)
def run_py_code():
remember_where = lisp.point()
# check if the line contains \inputminted
lisp.beginning_of_line()
l1 = lisp.point()
lisp.end_of_line()
l2 = lisp.point()
line = lisp.buffer_substring(l1,l2)
# if code comes from file
# get code content from latex
block_begin,block_end,content = get_block_content("```python","```\n")
# we have code content at this point
# scan content to find plt.plot(). if there is, scan buffer
# previous to *here* to determine order of _this_ plt.plot(), and
# give it an appropiate index that will be appended to the end of
# the .png image file, i.e. [buffer name]_[index].png. plt.plot()
# commands will be replaced by the corresponding plt.savefig
# command.
# generate savefig for execution code (no output in emacs yet)
bc = lisp.buffer_string()
plt_count_before = len(re.findall('plt\.savefig\(',bc))
base = os.path.splitext(lisp.buffer_name())[0]
f = '%s_%s.png' % (base, two_digit(plt_count_before+1))
rpl = "plt.savefig('%s')" % f
show_replaced = True if "plt.show()" in content else False
content=content.replace("plt.show()",rpl)
content="plt.figure();\n"+content
include_graphics_command = "" % f
# we have code content at this point
start = time.time()
with capture_output() as io:
res_code = ip.run_cell(content)
res = io.stdout
elapsed = (time.time() - start)
if len(res) > 0:
display_results(block_end, res) # display it
if show_replaced:
lisp.goto_char(block_end)
lisp.forward_line(2) # skip over end verbatim, leave one line emtpy
lisp.insert('\n' + include_graphics_command + '\n')
lisp.scroll_up(1) # skip over end verbatim, leave one line emtpy
lisp.goto_char(remember_where)
lisp.replace_string("plt.show()",rpl,None,block_begin,block_end)
lisp.goto_char(remember_where)
lisp.message("Ran in " + str(elapsed) + " seconds")
def verb_exists():
remem = lisp.point()
lisp.forward_line(2)
lisp.beginning_of_line()
verb_line_b = lisp.point()
lisp.end_of_line()
verb_line_e = lisp.point()
verb_line = lisp.buffer_substring(verb_line_b, verb_line_e)
lisp.goto_char(remem)
if "\\begin{verbatim}" in verb_line: return True
else: return False
def run_py_code():
remember_where = lisp.point()
# check if the line contains \inputminted
lisp.beginning_of_line()
l1 = lisp.point()
lisp.end_of_line()
l2 = lisp.point()
line = lisp.buffer_substring(l1, l2)
# if code comes from file
# get code content from latex
block_begin, block_end, content = get_block_content("```python", "```\n")
# we have code content at this point
# scan content to find plt.plot(). if there is, scan buffer
# previous to *here* to determine order of _this_ plt.plot(), and
# give it an appropiate index that will be appended to the end of
# the .png image file, i.e. [buffer name]_[index].png. plt.plot()
# commands will be replaced by the corresponding plt.savefig
# command.
# generate savefig for execution code (no output in emacs yet)
bc = lisp.buffer_string()
plt_count_before = len(re.findall('plt\.savefig\(', bc))
base = os.path.splitext(lisp.buffer_name())[0]
f = '%s_%s.png' % (base, two_digit(plt_count_before + 1))
rpl = "plt.savefig('%s')" % f
show_replaced = True if "plt.show()" in content else False
content = content.replace("plt.show()", rpl)
content = "plt.figure();\n" + content
include_graphics_command = "" % f
# we have code content at this point
start = time.time()
with capture_output() as io:
res_code = get_ip().run_cell(content)
res = io.stdout
elapsed = (time.time() - start)
if len(res) > 0:
display_results(block_end, res) # display it
if show_replaced:
lisp.goto_char(block_end)
lisp.forward_line(2) # skip over end verbatim, leave one line emtpy
lisp.insert('\n' + include_graphics_command + '\n')
lisp.scroll_up(1) # skip over end verbatim, leave one line emtpy
lisp.goto_char(remember_where)
lisp.replace_string("plt.show()", rpl, None, block_begin, block_end)
lisp.goto_char(remember_where)
lisp.message("Ran in " + str(elapsed) + " seconds")
def verb_exists():
remem = lisp.point()
lisp.forward_line(1)
lisp.beginning_of_line()
verb_line_b = lisp.point()
lisp.end_of_line()
verb_line_e = lisp.point()
verb_line = lisp.buffer_substring(verb_line_b, verb_line_e)
lisp.goto_char(remem)
if "```text" in verb_line: return True
else: return False
def occurrences_goto_occurrence():
lisp.end_of_line()
end = lisp.point()
lisp.beginning_of_line()
start = lisp.point()
line = lisp.buffer_substring_no_properties(start, end)
tokens = line.split()
if tokens:
filename = tokens[0]
offset = int(tokens[-1])
resource = _interface._get_resource(filename)
LispUtils().find_file(resource.real_path, other=True)
lisp.goto_char(offset + 1)
lisp.switch_to_buffer_other_window('*rope-occurrences*')
def occurrences_goto():
if lisp.line_number_at_pos() < 3:
lisp.forward_line(3 - lisp.line_number_at_pos())
lisp.end_of_line()
end = lisp.point()
lisp.beginning_of_line()
line = lisp.buffer_substring_no_properties(lisp.point(), end)
tokens = line.split()
if tokens:
filename = tokens[0]
offset = int(tokens[-1])
resource = _interface._get_resource(filename)
LispUtils().find_file(resource.real_path, other=True)
lisp.goto_char(offset + 1)
def occurrences_goto():
if lisp.line_number_at_pos() < 3:
lisp.forward_line(3 - lisp.line_number_at_pos())
lisp.end_of_line()
end = lisp.point()
lisp.beginning_of_line()
line = lisp.buffer_substring_no_properties(lisp.point(), end)
tokens = line.split()
if tokens:
filename = tokens[0]
offset = int(tokens[-1])
resource = _interface._get_resource(filename)
LispUtils().find_file(resource.real_path, other=True)
lisp.goto_char(offset + 1)
def show():
b,e,res = get_block_content("$$","$$")
d = hash(res)
foutsimple = "_preview/f-%d.png" % d
if os.path.isfile(foutsimple): return # do nothing
latex(res)
curr_dir = os.path.dirname(lisp.buffer_file_name())
fout = "%s/_preview/f-%d.png" % (curr_dir,d)
shutil.copy(dir + "\standalone.png",fout)
remem = lisp.point()
lisp.goto_char(e)
lisp.forward_line(1)
lisp.beginning_of_line(); bb = lisp.point()
lisp.end_of_line(); ee = lisp.point()
lisp.delete_region(bb,ee)
lisp.insert("%{{" + foutsimple + "}}")
lisp.goto_char(remem)
lisp.iimage_mode(1)
def display_results(end_block, res):
lisp.goto_char(end_block)
lisp.forward_line(2)
lisp.beginning_of_line()
verb_line_b = lisp.point()
lisp.end_of_line()
verb_line_e = lisp.point()
verb_line = lisp.buffer_substring(verb_line_b, verb_line_e)
if "\\begin{verbatim}" in verb_line:
verb_begin,verb_end,content = get_block_content("\\begin{verbatim}","\\end{verbatim}")
lisp.delete_region(verb_begin, verb_end)
lisp.goto_char(verb_begin)
else:
lisp.backward_line_nomark(1)
lisp.insert("\n")
res=res.replace("\r","")
lisp.insert("\\begin{verbatim}\n")
lisp.insert(res)
lisp.insert("\\end{verbatim}")
def show():
b, e, res = get_block_content("$$", "$$")
d = hash(res)
foutsimple = "_preview/f-%d.png" % d
if os.path.isfile(foutsimple): return # do nothing
latex(res)
curr_dir = os.path.dirname(lisp.buffer_file_name())
fout = "%s/_preview/f-%d.png" % (curr_dir, d)
shutil.copy(dir + "\standalone.png", fout)
remem = lisp.point()
lisp.goto_char(e)
lisp.forward_line(1)
lisp.beginning_of_line()
bb = lisp.point()
lisp.end_of_line()
ee = lisp.point()
lisp.delete_region(bb, ee)
lisp.insert("%{{" + foutsimple + "}}")
lisp.goto_char(remem)
lisp.iimage_mode(1)
def find_comment(self):
"""\
Find and return the limits of the block of comments following or enclosing
the cursor, or return an error if the cursor is not within such a block
of comments. Extend it as far as possible in both directions.
"""
let = Let().push_excursion()
try:
# Find the start of the current or immediately following comment.
lisp.beginning_of_line()
lisp.skip_chars_forward(' \t\n')
lisp.beginning_of_line()
if not language_matcher[0](self.remainder_of_line()):
temp = lisp.point()
if not lisp.re_search_forward('\\*/', None, lisp.t):
lisp.error("outside any comment block")
lisp.re_search_backward('/\\*')
if lisp.point() > temp:
lisp.error("outside any comment block")
temp = lisp.point()
lisp.beginning_of_line()
lisp.skip_chars_forward(' \t')
if lisp.point() != temp:
lisp.error("text before start of comment")
lisp.beginning_of_line()
start = lisp.point()
language = guess_language(self.remainder_of_line())
# Find the end of this comment.
if language == 2:
lisp.search_forward('*/')
if not lisp.looking_at('[ \t]*$'):
lisp.error("text after end of comment")
lisp.end_of_line()
if lisp.eobp():
lisp.insert('\n')
else:
lisp.forward_char(1)
end = lisp.point()
# Try to extend the comment block backwards.
lisp.goto_char(start)
while not lisp.bobp():
if language == 2:
lisp.skip_chars_backward(' \t\n')
if not lisp.looking_at('[ \t]*\n[ \t]*/\\*'):
break
if lisp.point() < 2:
break
lisp.backward_char(2)
if not lisp.looking_at('\\*/'):
break
lisp.re_search_backward('/\\*')
temp = lisp.point()
lisp.beginning_of_line()
lisp.skip_chars_forward(' \t')
if lisp.point() != temp:
break
lisp.beginning_of_line()
else:
lisp.previous_line(1)
if not language_matcher[language](
self.remainder_of_line()):
break
start = lisp.point()
# Try to extend the comment block forward.
lisp.goto_char(end)
while language_matcher[language](self.remainder_of_line()):
if language == 2:
lisp.re_search_forward('[ \t]*/\\*')
lisp.re_search_forward('\\*/')
if lisp.looking_at('[ \t]*$'):
lisp.beginning_of_line()
lisp.forward_line(1)
end = lisp.point()
else:
lisp.forward_line(1)
end = lisp.point()
return start, end
finally:
let.pops()
def run_py_code():
remember_where = lisp.point()
# check if the line contains \inputminted
lisp.beginning_of_line()
l1 = lisp.point()
lisp.end_of_line()
l2 = lisp.point()
line = lisp.buffer_substring(l1,l2)
# if code comes from file
if "\\inputminted" in line:
block_begin = lisp.point()
lisp.message(line)
py_file = re.search("\{python\}\{(.*?)\}", line).groups(1)[0]
# get code content from file
curr_dir = os.path.dirname(lisp.buffer_file_name())
content = open(curr_dir + "/" + py_file).read()
block_end = l2 # end of block happens to be end of include file line
lisp.goto_char(remember_where)
else:
# get code content from latex
block_begin,block_end,content = get_block_content("\\begin{minted}","\\end{minted}")
# we have code content at this point
# scan content to find plt.plot(). if there is, scan buffer
# previous to *here* to determine order of _this_ plt.plot(), and
# give it an appropiate index that will be appended to the end of
# the .png image file, i.e. [buffer name]_[index].png. plt.plot()
# commands will be replaced by the corresponding plt.savefig
# command.
# generate savefig for execution code (no output in emacs yet)
bc = get_buffer_content_prev(block_begin)
plt_count_before = len(re.findall('plt\.savefig\(',bc))
base = os.path.splitext(lisp.buffer_name())[0]
f = '%s_%s.png' % (base, two_digit(plt_count_before+1))
rpl = "plt.hold(False)\nplt.savefig('%s')\nplt.hold(False)" % f
show_replaced = True if "plt.show()" in content else False
content=content.replace("plt.show()",rpl)
include_graphics_command = "\\includegraphics[height=6cm]{%s}" % f
#(ip) = get_kernel_pointer(lisp.buffer_name())
start = time.time()
with capture_output() as io:
res_code = ip.run_cell(content)
res = io.stdout
elapsed = (time.time() - start)
display_results(block_end, res) # display it
# generate includegraphics command
if show_replaced:
lisp.forward_line(2) # skip over end verbatim, leave one line emtpy
lisp.insert(include_graphics_command + '\n')
lisp.scroll_up(1) # skip over end verbatim, leave one line emtpy
lisp.goto_char(remember_where)
lisp.replace_string("plt.show()",rpl,None,block_begin,block_end)
lisp.goto_char(remember_where)
if "plt.savefig" in content: lisp.preview_buffer()
lisp.message("Ran in " + str(elapsed) + " seconds")
def find_comment(self):
"""\
Find and return the limits of the block of comments following or enclosing
the cursor, or return an error if the cursor is not within such a block
of comments. Extend it as far as possible in both directions.
"""
let = Let().push_excursion()
try:
# Find the start of the current or immediately following comment.
lisp.beginning_of_line()
lisp.skip_chars_forward(" \t\n")
lisp.beginning_of_line()
if not language_matcher[0](self.remainder_of_line()):
temp = lisp.point()
if not lisp.re_search_forward("\\*/", None, lisp.t):
lisp.error("outside any comment block")
lisp.re_search_backward("/\\*")
if lisp.point() > temp:
lisp.error("outside any comment block")
temp = lisp.point()
lisp.beginning_of_line()
lisp.skip_chars_forward(" \t")
if lisp.point() != temp:
lisp.error("text before start of comment")
lisp.beginning_of_line()
start = lisp.point()
language = guess_language(self.remainder_of_line())
# Find the end of this comment.
if language == 2:
lisp.search_forward("*/")
if not lisp.looking_at("[ \t]*$"):
lisp.error("text after end of comment")
lisp.end_of_line()
if lisp.eobp():
lisp.insert("\n")
else:
lisp.forward_char(1)
end = lisp.point()
# Try to extend the comment block backwards.
lisp.goto_char(start)
while not lisp.bobp():
if language == 2:
lisp.skip_chars_backward(" \t\n")
if not lisp.looking_at("[ \t]*\n[ \t]*/\\*"):
break
if lisp.point() < 2:
break
lisp.backward_char(2)
if not lisp.looking_at("\\*/"):
break
lisp.re_search_backward("/\\*")
temp = lisp.point()
lisp.beginning_of_line()
lisp.skip_chars_forward(" \t")
if lisp.point() != temp:
break
lisp.beginning_of_line()
else:
lisp.previous_line(1)
if not language_matcher[language](self.remainder_of_line()):
break
start = lisp.point()
# Try to extend the comment block forward.
lisp.goto_char(end)
while language_matcher[language](self.remainder_of_line()):
if language == 2:
lisp.re_search_forward("[ \t]*/\\*")
lisp.re_search_forward("\\*/")
if lisp.looking_at("[ \t]*$"):
lisp.beginning_of_line()
lisp.forward_line(1)
end = lisp.point()
else:
lisp.forward_line(1)
end = lisp.point()
return start, end
finally:
let.pops()
def run_py_code():
remember_where = lisp.point()
# check if the line contains \inputminted
lisp.beginning_of_line()
l1 = lisp.point()
lisp.end_of_line()
l2 = lisp.point()
line = lisp.buffer_substring(l1,l2)
block_begin,block_end,content = get_block_content("```python","```")
#lisp.message(content)
# we have code content at this point
# scan content to find plt.plot(). if there is, scan buffer
# previous to *here* to determine order of _this_ plt.plot(), and
# give it an appropiate index that will be appended to the end of
# the .png image file, i.e. [buffer name]_[index].png. plt.plot()
# commands will be replaced by the corresponding plt.savefig
# command.
# generate savefig for execution code (no output in emacs yet)
bc = get_buffer_content_prev(block_begin)
plt_count_before = len(re.findall('plt\.savefig\(',bc))
base = os.path.splitext(lisp.buffer_name())[0]
f = '%s_%s.png' % (base, two_digit(plt_count_before+1))
rpl = "plt.savefig('%s')" % f
show_replaced = True if "plt.show()" in content else False
content=content.replace("plt.show()",rpl)
include_graphics_command = "" % f
(kc,kernel,ip) = get_kernel_pointer(lisp.buffer_name())
start = time.time()
res = ''
with capture_output() as io:
ip.run_cell(content)
res = io.stdout
if kernel.shell.last_known_outflag:
etype, value, tb = kernel.shell._get_exc_info()
res = str(etype) + " " + str(value) + "\n"
elapsed = (time.time() - start)
# replace this unnecessary message so output becomes blank
if res and len(res) > 0: # if result not empty
res = res.replace("Populating the interactive namespace from numpy and matplotlib\n","")
display_results(block_end, res) # display it
else:
display_results(block_end, "")
lisp.goto_char(block_end)
# generate includegraphics command
if show_replaced:
lisp.forward_line(2) # skip over end verbatim, leave one line emtpy
lisp.insert(include_graphics_command + '\n')
#lisp.backward_line_nomark(1) # skip over end verbatim, leave one line emtpy
lisp.scroll_up(1) # skip over end verbatim, leave one line emtpy
lisp.goto_char(remember_where)
lisp.replace_string("plt.show()",rpl,None,block_begin,block_end)
lisp.goto_char(remember_where)
if "plt.savefig" in content: lisp.preview_buffer()
lisp.message("Ran in " + str(elapsed) + " seconds")
def run_py_code():
remember_where = lisp.point()
# check if the line contains \inputminted
lisp.beginning_of_line()
l1 = lisp.point()
lisp.end_of_line()
l2 = lisp.point()
line = lisp.buffer_substring(l1, l2)
# if code comes from file
if "\\inputminted" in line:
block_begin = lisp.point()
lisp.message(line)
py_file = re.search("\{python\}\{(.*?)\}", line).groups(1)[0]
# get code content from file
curr_dir = os.path.dirname(lisp.buffer_file_name())
content = open(curr_dir + "/" + py_file).read()
block_end = l2 # end of block happens to be end of include file line
lisp.goto_char(remember_where)
else:
# get code content from latex
block_begin, block_end, content = get_block_content(
"\\begin{minted}", "\\end{minted}")
# we have code content at this point
# scan content to find plt.plot(). if there is, scan buffer
# previous to *here* to determine order of _this_ plt.plot(), and
# give it an appropiate index that will be appended to the end of
# the .png image file, i.e. [buffer name]_[index].png. plt.plot()
# commands will be replaced by the corresponding plt.savefig
# command.
# generate savefig for execution code (no output in emacs yet)
bc = lisp.buffer_string()
plt_count_before = len(re.findall('plt\.savefig\(', bc))
base = os.path.splitext(lisp.buffer_name())[0]
f = '%s_%s.png' % (base, two_digit(plt_count_before + 1))
rpl = "plt.savefig('%s')" % f
show_replaced = True if "plt.show()" in content else False
content = content.replace("plt.show()", rpl)
content = "plt.figure()\n" + content
include_graphics_command = "\\includegraphics[height=6cm]{%s}" % f
#(ip) = get_kernel_pointer(lisp.buffer_name())
start = time.time()
with capture_output() as io:
res_code = get_ip().run_cell(content)
res = io.stdout
elapsed = (time.time() - start)
display_results(block_end, res) # display it
# generate includegraphics command
if show_replaced:
lisp.forward_line(2) # skip over end verbatim, leave one line emtpy
lisp.insert(include_graphics_command + '\n')
lisp.scroll_up(1) # skip over end verbatim, leave one line emtpy
lisp.goto_char(remember_where)
lisp.replace_string("plt.show()", rpl, None, block_begin, block_end)
lisp.goto_char(remember_where)
if "plt.savefig" in content: lisp.preview_buffer()
lisp.message("Ran in " + str(elapsed) + " seconds")
def run_py_code():
remember_where = lisp.point()
# check if the line contains \inputminted
lisp.beginning_of_line()
l1 = lisp.point()
lisp.end_of_line()
l2 = lisp.point()
line = lisp.buffer_substring(l1, l2)
# if code comes from file
if "\\inputminted" in line:
lisp.message(line)
py_file = re.search("\{python\}\{(.*?)\}", line).groups(1)[0]
# get code content from file
curr_dir = os.path.dirname(lisp.buffer_file_name())
content = open(curr_dir + "/" + py_file).read()
block_end = l2 # end of block happens to be end of include file line
lisp.goto_char(remember_where)
else:
# get code content from latex
block_begin, block_end, content = get_block_content(
"\\begin{minted}", "\\end{minted}")
#lisp.message(content)
# we have code content at this point
# scan content to find plt.plot(). if there is, scan buffer
# previous to *here* to determine order of _this_ plt.plot(), and
# give it an appropiate index that will be appended to the end of
# the .png image file, i.e. [buffer name]_[index].png. plt.plot()
# commands will be replaced by the corresponding plt.savefig
# command.
# generate savefig for execution code (no output in emacs yet)
bc = get_buffer_content_prev(block_begin)
plt_count_before = len(re.findall('plt\.savefig\(', bc))
base = os.path.splitext(lisp.buffer_name())[0]
f = '%s_%s.png' % (base, two_digit(plt_count_before + 1))
rpl = "plt.savefig('%s')" % f
show_replaced = True if "plt.show()" in content else False
content = content.replace("plt.show()", rpl)
include_graphics_command = "\\includegraphics[height=6cm]{%s}" % f
(kc, kernel, ip) = get_kernel_pointer(lisp.buffer_name())
start = time.time()
res = ''
with capture_output() as io:
ip.run_cell(content)
res = io.stdout
if kernel.shell.last_known_outflag:
etype, value, tb = kernel.shell._get_exc_info()
res = str(etype) + " " + str(value) + "\n"
elapsed = (time.time() - start)
# replace this unnecessary message so output becomes blank
if res and len(res) > 0: # if result not empty
res = res.replace(
"Populating the interactive namespace from numpy and matplotlib\n",
"")
display_results(block_end, res) # display it
else:
display_results(block_end, "")
lisp.goto_char(block_end)
# generate includegraphics command
if show_replaced:
lisp.forward_line(2) # skip over end verbatim, leave one line emtpy
lisp.insert(include_graphics_command + '\n')
lisp.backward_line_nomark(
1) # skip over end verbatim, leave one line emtpy
lisp.goto_char(remember_where)
lisp.replace_string("plt.show()", rpl, None, block_begin, block_end)
lisp.goto_char(remember_where)
if "plt.savefig" in content: lisp.preview_buffer()
lisp.message("Ran in " + str(elapsed) + " seconds")
