def main(night_name=None, files=None):
"""
cal_DARK_spirou.py main function, if night_name and files are None uses
arguments from run time i.e.:
cal_DARK_spirou.py [night_directory] [fitsfilename]
:param night_name: string or None, the folder within data raw directory
containing files (also reduced directory) i.e.
/data/raw/20170710 would be "20170710" but
/data/raw/AT5/20180409 would be "AT5/20180409"
:param files: string, list or None, the list of files to use for
arg_file_names and fitsfilename
(if None assumes arg_file_names was set from run time)
:return ll: dictionary, containing all the local variables defined in
main
"""
# ----------------------------------------------------------------------
# Set up
# ----------------------------------------------------------------------
# get parameters from config files/run time args/load paths + calibdb
p = spirouStartup.Begin(recipe=__NAME__)
p = spirouStartup.LoadArguments(p, night_name, files)
p = spirouStartup.InitialFileSetup(p)
# ----------------------------------------------------------------------
# Read image file
# ----------------------------------------------------------------------
# read the image data
p, data, hdr = spirouImage.ReadImageAndCombine(p, framemath='average')
# ----------------------------------------------------------------------
# fix for un-preprocessed files
# ----------------------------------------------------------------------
data = spirouImage.FixNonPreProcess(p, data)
# ----------------------------------------------------------------------
# Find the amplitude to use for the local background
# ----------------------------------------------------------------------
spirouBACK.MakeLocalBackgroundMap(p, data)
# ----------------------------------------------------------------------
# End Message
# ----------------------------------------------------------------------
p = spirouStartup.End(p, outputs=None)
# return a copy of locally defined variables in the memory
return dict(locals())
def main(night_name=None, files=None):
# ----------------------------------------------------------------------
# Set up
# ----------------------------------------------------------------------
# get parameters from config files/run time args/load paths + calibdb
p = spirouStartup.Begin(recipe=__NAME__)
p = spirouStartup.LoadArguments(p, night_name, files)
# force plotting to 1
p['DRS_PLOT'] = 1
# ----------------------------------------------------------------------
# Read image file
# ----------------------------------------------------------------------
# read the image data
data, hdr, nx, ny = spirouImage.ReadImage(p)
# ----------------------------------------------------------------------
# fix for un-preprocessed files
# ----------------------------------------------------------------------
data = spirouImage.FixNonPreProcess(p, data, filename=p['FITSFILENAME'])
# ----------------------------------------------------------------------
# Get basic image properties
# ----------------------------------------------------------------------
# get sig det value
p = spirouImage.GetSigdet(p, hdr, name='sigdet')
# get exposure time
p = spirouImage.GetExpTime(p, hdr, name='exptime')
# get gain
p = spirouImage.GetGain(p, hdr, name='gain')
# set sigdet and conad keywords (sigdet is changed later)
p['KW_CCD_SIGDET'][1] = p['SIGDET']
p['KW_CCD_CONAD'][1] = p['GAIN']
# now change the value of sigdet if require
if p['IC_EXT_SIGDET'] > 0:
p['SIGDET'] = float(p['IC_EXT_SIGDET'])
# ----------------------------------------------------------------------
# Resize image
# ----------------------------------------------------------------------
# rotate the image and convert from ADU/s to e-
data = spirouImage.ConvertToADU(spirouImage.FlipImage(p, data), p=p)
# convert NaN to zeros
data2 = np.where(~np.isfinite(data), np.zeros_like(data), data)
# resize image
# bkwargs = dict(xlow=p['IC_CCDX_LOW'], xhigh=p['IC_CCDX_HIGH'],
# ylow=p['IC_CCDY_LOW'], yhigh=p['IC_CCDY_HIGH'],
# getshape=False)
# data2 = spirouImage.ResizeImage(data0, **bkwargs)
# log change in data size
# WLOG(p, '', ('Image format changed to '
# '{0}x{1}').format(*data2.shape[::-1]))
# ----------------------------------------------------------------------
# Log the number of dead pixels
# ----------------------------------------------------------------------
# get the number of bad pixels
n_bad_pix = np.nansum(data2 == 0)
n_bad_pix_frac = n_bad_pix * 100 / np.product(data2.shape)
# Log number
wmsg = 'Nb dead pixels = {0} / {1:.2f} %'
WLOG(p, 'info', wmsg.format(int(n_bad_pix), n_bad_pix_frac))
satseuil = 64536.
col = 2100
seuil = 10000
slice0 = 5
plt.ion()
plt.clf()
plt.imshow(data2, origin='lower', clim=(1., seuil))
plt.colorbar()
plt.axis([0, nx, 0, ny])
plt.plot(np.ones(4096) * col, np.arange(4096), c='red')
plt.figure()
plt.clf()
centpart = data2[:, col - slice0:col + slice0]
# centpart = data2[col - slice:col + slice,:]
# weights = np.where((centpart < satseuil) & (centpart > 0), 1, 0.0001)
# y = np.average(centpart, axis=1, weights=weights) ## weighted average
y = np.nanmedian(centpart, axis=1)
# y=average(centpart,axis=1,weights=where((centpart>0),1,0.0001))
# ## weighted average
plt.plot(np.arange(ny), y)
# ----------------------------------------------------------------------
# End Message
# ----------------------------------------------------------------------
p = spirouStartup.End(p, outputs=None)
# return a copy of locally defined variables in the memory
return dict(locals())
def main(night_name=None, files=None, fiber_type=None, **kwargs):
"""
cal_DRIFT_E2DS_spirou.py main function, if night_name and files are
None uses arguments from run time i.e.:
cal_DRIFT_E2DS_spirou.py [night_directory] [files]
:param night_name: string or None, the folder within data raw directory
containing files (also reduced directory) i.e.
/data/raw/20170710 would be "20170710" but
/data/raw/AT5/20180409 would be "AT5/20180409"
:param files: string, list or None, the list of files to use for
arg_file_names and fitsfilename
(if None assumes arg_file_names was set from run time)
:param fiber_type: string, if None does all fiber types (defined in
constants_SPIROU FIBER_TYPES (default is AB, A, B, C
if defined then only does this fiber type (but must
be in FIBER_TYPES)
:param kwargs: any keyword to overwrite constant in param dict "p"
:return ll: dictionary, containing all the local variables defined in
main
"""
# ----------------------------------------------------------------------
# Set up
# ----------------------------------------------------------------------
# get parameters from config files/run time args/load paths + calibdb
p = spirouStartup.Begin(recipe=__NAME__)
p = spirouStartup.LoadArguments(p, night_name, files)
p = spirouStartup.InitialFileSetup(p, calibdb=True)
# deal with fiber type
if fiber_type is None:
fiber_type = p['FIBER_TYPES']
if type(fiber_type) == str:
if fiber_type.upper() == 'ALL':
fiber_type = p['FIBER_TYPES']
elif fiber_type in p['FIBER_TYPES']:
fiber_type = [fiber_type]
else:
emsg = 'fiber_type="{0}" not understood'
WLOG(p, 'error', emsg.format(fiber_type))
# set fiber type
p['FIB_TYPE'] = fiber_type
p.set_source('FIB_TYPE', __NAME__ + '__main__()')
# Overwrite keys from source
for kwarg in kwargs:
p[kwarg] = kwargs[kwarg]
# ----------------------------------------------------------------------
# Read image file
# ----------------------------------------------------------------------
# read the image data
p, data, hdr = spirouImage.ReadImageAndCombine(p, framemath='add')
# ----------------------------------------------------------------------
# fix for un-preprocessed files
# ----------------------------------------------------------------------
data = spirouImage.FixNonPreProcess(p, data)
# ----------------------------------------------------------------------
# Get basic image properties
# ----------------------------------------------------------------------
# get sig det value
p = spirouImage.GetSigdet(p, hdr, name='sigdet')
# get exposure time
p = spirouImage.GetExpTime(p, hdr, name='exptime')
# get gain
p = spirouImage.GetGain(p, hdr, name='gain')
# set sigdet and conad keywords (sigdet is changed later)
p['KW_CCD_SIGDET'][1] = p['SIGDET']
p['KW_CCD_CONAD'][1] = p['GAIN']
# now change the value of sigdet if require
if p['IC_EXT_SIGDET'] > 0:
p['SIGDET'] = float(p['IC_EXT_SIGDET'])
# get DPRTYPE from header (Will have it if valid)
p = spirouImage.ReadParam(p, hdr, 'KW_DPRTYPE', required=False, dtype=str)
# check the DPRTYPE is not None
if (p['DPRTYPE'] == 'None') or (['DPRTYPE'] is None):
emsg1 = 'Error: {0} is not set in header for file {1}'
eargs = [p['KW_DPRTYPE'][0], p['FITSFILENAME']]
emsg2 = '\tPlease run pre-processing on file.'
emsg3 = ('\tIf pre-processing fails or skips file, file is not '
'currrently as valid DRS fits file.')
WLOG(p, 'error', [emsg1.format(*eargs), emsg2, emsg3])
else:
p['DPRTYPE'] = p['DPRTYPE'].strip()
# ----------------------------------------------------------------------
# Correction of DARK
# ----------------------------------------------------------------------
p, datac = spirouImage.CorrectForDark(p, data, hdr)
# ----------------------------------------------------------------------
# Resize image
# ----------------------------------------------------------------------
# rotate the image and convert from ADU/s to ADU
data = spirouImage.ConvertToADU(spirouImage.FlipImage(p, datac), p=p)
# convert NaN to zeros
data0 = np.where(~np.isfinite(data), np.zeros_like(data), data)
# resize image
bkwargs = dict(xlow=p['IC_CCDX_LOW'],
xhigh=p['IC_CCDX_HIGH'],
ylow=p['IC_CCDY_LOW'],
yhigh=p['IC_CCDY_HIGH'],
getshape=False)
data1 = spirouImage.ResizeImage(p, data0, **bkwargs)
# log change in data size
wmsg = 'Image format changed to {1}x{0}'
WLOG(p, '', wmsg.format(*data1.shape))
# ----------------------------------------------------------------------
# Correct for the BADPIX mask (set all bad pixels to zero)
# ----------------------------------------------------------------------
p, data1 = spirouImage.CorrectForBadPix(p, data1, hdr)
# ----------------------------------------------------------------------
# Log the number of dead pixels
# ----------------------------------------------------------------------
# get the number of bad pixels
n_bad_pix = np.sum(~np.isfinite(data1))
n_bad_pix_frac = n_bad_pix * 100 / np.product(data1.shape)
# Log number
wmsg = 'Nb dead pixels = {0} / {1:.4f} %'
WLOG(p, 'info', wmsg.format(int(n_bad_pix), n_bad_pix_frac))
# ----------------------------------------------------------------------
# Get the miny, maxy and max_signal for the central column
# ----------------------------------------------------------------------
# get the central column
y = data1[p['IC_CENT_COL'], :]
# get the min max and max signal using box smoothed approach
miny, maxy, max_signal, diff_maxmin = spirouBACK.MeasureMinMaxSignal(p, y)
# Log max average flux/pixel
wmsg = 'Maximum average flux/pixel in the spectrum: {0:.1f} [ADU]'
WLOG(p, 'info', wmsg.format(max_signal / p['NBFRAMES']))
# ----------------------------------------------------------------------
# Background computation
# ----------------------------------------------------------------------
if p['IC_DO_BKGR_SUBTRACTION']:
# log that we are doing background measurement
WLOG(p, '', 'Doing background measurement on raw frame')
# get the bkgr measurement
bargs = [p, data1, hdr]
# background, xc, yc, minlevel = spirouBACK.MeasureBackgroundFF(*bargs)
p, background = spirouBACK.MeasureBackgroundMap(*bargs)
else:
background = np.zeros_like(data1)
p['BKGRDFILE'] = 'None'
p.set_source('BKGRDFILE', __NAME__ + '.main()')
# apply background correction to data (and set to zero where negative)
data1 = data1 - background
# ----------------------------------------------------------------------
# Read tilt slit angle
# ----------------------------------------------------------------------
# define loc storage parameter dictionary
loc = ParamDict()
# get tilts (if the mode requires it)
if p['IC_EXTRACT_TYPE'] not in EXTRACT_SHAPE_TYPES:
p, loc['TILT'] = spirouImage.ReadTiltFile(p, hdr)
loc.set_source('TILT',
__NAME__ + '/main() + /spirouImage.ReadTiltFile')
else:
loc['TILT'] = None
loc.set_source('TILT', __NAME__ + '/main()')
# ----------------------------------------------------------------------
# Earth Velocity calculation
# ----------------------------------------------------------------------
if p['IC_IMAGE_TYPE'] == 'H4RG':
p, loc = spirouImage.GetEarthVelocityCorrection(p, loc, hdr)
# ----------------------------------------------------------------------
# Get all fiber data (for all fibers)
# ----------------------------------------------------------------------
# TODO: This is temp solution for options 5a and 5b
loc_fibers = spirouLOCOR.GetFiberData(p, hdr)
# ------------------------------------------------------------------
# Deal with debananafication
# ------------------------------------------------------------------
# if mode 4a or 4b we need to straighten in x only
if p['IC_EXTRACT_TYPE'] in ['4a', '4b']:
# get the shape parameters
p, shapem_x = spirouImage.GetShapeX(p, hdr)
p, shape_local = spirouImage.GetShapeLocal(p, hdr)
# log progress
WLOG(p, '', 'Debananafying (straightening) image')
# apply shape transforms
targs = dict(lin_transform_vect=shape_local, dxmap=shapem_x)
data2 = spirouImage.EATransform(data1, **targs)
# if mode 5a or 5b we need to straighten in x and y using the
# polynomial fits for location
elif p['IC_EXTRACT_TYPE'] in ['5a', '5b']:
# get the shape parameters
p, shapem_x = spirouImage.GetShapeX(p, hdr)
p, shapem_y = spirouImage.GetShapeY(p, hdr)
p, shape_local = spirouImage.GetShapeLocal(p, hdr)
p, fpmaster = spirouImage.GetFPMaster(p, hdr)
# get the bad pixel map
bkwargs = dict(return_map=True, quiet=True)
p, badpix = spirouImage.CorrectForBadPix(p, data1, hdr, **bkwargs)
# log progress
WLOG(p, '', 'Cleaning image')
# clean the image
data1 = spirouEXTOR.CleanHotpix(data1, badpix)
# log progress
WLOG(p, '', 'Debananafying (straightening) image')
# apply shape transforms
targs = dict(lin_transform_vect=shape_local,
dxmap=shapem_x,
dymap=shapem_y)
data2 = spirouImage.EATransform(data1, **targs)
# in any other mode we do not straighten
else:
data2 = np.array(data1)
# ----------------------------------------------------------------------
# Fiber loop
# ----------------------------------------------------------------------
# loop around fiber types
for fiber in p['FIB_TYPE']:
# set fiber
p['FIBER'] = fiber
p.set_source('FIBER', __NAME__ + '/main()()')
# ------------------------------------------------------------------
# Read wavelength solution
# ------------------------------------------------------------------
# set source of wave file
wsource = __NAME__ + '/main() + /spirouImage.GetWaveSolution'
# Force A and B to AB solution
if fiber in ['A', 'B']:
wave_fiber = 'AB'
else:
wave_fiber = fiber
# get wave image
wkwargs = dict(hdr=hdr,
return_wavemap=True,
return_filename=True,
return_header=True,
fiber=wave_fiber)
wout = spirouImage.GetWaveSolution(p, **wkwargs)
loc['WAVEPARAMS'], loc['WAVE'], loc['WAVEFILE'] = wout[:3]
loc['WAVEHDR'], loc['WSOURCE'] = wout[3:]
source_names = ['WAVE', 'WAVEFILE', 'WAVEPARAMS', 'WAVEHDR']
loc.set_sources(source_names, wsource)
# get dates
loc['WAVE_ACQTIMES'] = spirouDB.GetTimes(p, loc['WAVEHDR'])
loc.set_source('WAVE_ACQTIMES', __NAME__ + '.main()')
# get the recipe that produced the wave solution
if 'WAVECODE' in loc['WAVEHDR']:
loc['WAVE_CODE'] = loc['WAVEHDR']['WAVECODE']
else:
loc['WAVE_CODE'] = 'UNKNOWN'
loc.set_source('WAVE_CODE', __NAME__ + '.main()')
# ----------------------------------------------------------------------
# Get WFP keys
# ----------------------------------------------------------------------
# Read the WFP keys - if they don't exist set to None and deal
# with later
p = spirouImage.ReadParam(p,
loc['WAVEHDR'],
'KW_WFP_DRIFT',
name='WFP_DRIFT',
required=False)
p = spirouImage.ReadParam(p,
loc['WAVEHDR'],
'KW_WFP_FWHM',
name='WFP_FWHM',
required=False)
p = spirouImage.ReadParam(p,
loc['WAVEHDR'],
'KW_WFP_CONTRAST',
name='WFP_CONTRAST',
required=False)
p = spirouImage.ReadParam(p,
loc['WAVEHDR'],
'KW_WFP_MAXCPP',
name='WFP_MAXCPP',
required=False)
p = spirouImage.ReadParam(p,
loc['WAVEHDR'],
'KW_WFP_MASK',
name='WFP_MASK',
required=False)
p = spirouImage.ReadParam(p,
loc['WAVEHDR'],
'KW_WFP_LINES',
name='WFP_LINES',
required=False)
p = spirouImage.ReadParam(p,
loc['WAVEHDR'],
'KW_WFP_TARG_RV',
name='WFP_TARG_RV',
required=False)
p = spirouImage.ReadParam(p,
loc['WAVEHDR'],
'KW_WFP_WIDTH',
name='WFP_WIDTH',
required=False)
p = spirouImage.ReadParam(p,
loc['WAVEHDR'],
'KW_WFP_STEP',
name='WFP_STEP',
required=False)
# ----------------------------------------------------------------------
# Read Flat file
# ----------------------------------------------------------------------
fout = spirouImage.ReadFlatFile(p, hdr, return_header=True)
p, loc['FLAT'], flathdr = fout
loc.set_source('FLAT',
__NAME__ + '/main() + /spirouImage.ReadFlatFile')
# get flat extraction mode
if p['KW_E2DS_EXTM'][0] in flathdr:
flat_ext_mode = flathdr[p['KW_E2DS_EXTM'][0]]
else:
flat_ext_mode = None
# ------------------------------------------------------------------
# Check extraction method is same as flat extraction method
# ------------------------------------------------------------------
# get extraction method and function
extmethod, extfunc = spirouEXTOR.GetExtMethod(p, p['IC_EXTRACT_TYPE'])
if not DEBUG:
# compare flat extraction mode to extraction mode
spirouEXTOR.CompareExtMethod(p, flat_ext_mode, extmethod, 'FLAT',
'EXTRACTION')
# ------------------------------------------------------------------
# Read Blaze file
# ------------------------------------------------------------------
p, loc['BLAZE'] = spirouImage.ReadBlazeFile(p, hdr)
blazesource = __NAME__ + '/main() + /spirouImage.ReadBlazeFile'
loc.set_source('BLAZE', blazesource)
# ------------------------------------------------------------------
# Get fiber specific parameters from loc_fibers
# ------------------------------------------------------------------
# get this fibers parameters
p = spirouImage.FiberParams(p, p['FIBER'], merge=True)
# get localisation parameters
for key in loc_fibers[fiber]:
loc[key] = loc_fibers[fiber][key]
loc.set_source(key, loc_fibers[fiber].sources[key])
# get locofile source
p['LOCOFILE'] = loc['LOCOFILE']
p.set_source('LOCOFILE', loc.sources['LOCOFILE'])
# get the order_profile
order_profile = loc_fibers[fiber]['ORDER_PROFILE']
# ------------------------------------------------------------------
# Set up Extract storage
# ------------------------------------------------------------------
# Create array to store extraction (for each order and each pixel
# along order)
loc['E2DS'] = np.zeros((loc['NUMBER_ORDERS'], data2.shape[1]))
loc['E2DSFF'] = np.zeros((loc['NUMBER_ORDERS'], data2.shape[1]))
loc['E2DSLL'] = []
loc['SPE1'] = np.zeros((loc['NUMBER_ORDERS'], data2.shape[1]))
loc['SPE3'] = np.zeros((loc['NUMBER_ORDERS'], data2.shape[1]))
loc['SPE4'] = np.zeros((loc['NUMBER_ORDERS'], data2.shape[1]))
loc['SPE5'] = np.zeros((loc['NUMBER_ORDERS'], data2.shape[1]))
# Create array to store the signal to noise ratios for each order
loc['SNR'] = np.zeros(loc['NUMBER_ORDERS'])
# ------------------------------------------------------------------
# Extract orders
# ------------------------------------------------------------------
# source for parameter dictionary
source = __NAME__ + '/main()'
# get limits of order extraction
valid_orders = spirouEXTOR.GetValidOrders(p, loc)
# loop around each order
for order_num in valid_orders:
# -------------------------------------------------------------
# IC_EXTRACT_TYPE decides the extraction routine
# -------------------------------------------------------------
eargs = [p, loc, data2, order_num]
ekwargs = dict(mode=p['IC_EXTRACT_TYPE'],
order_profile=order_profile)
with warnings.catch_warnings(record=True) as w:
eout = spirouEXTOR.Extraction(*eargs, **ekwargs)
# deal with different return
if p['IC_EXTRACT_TYPE'] in EXTRACT_LL_TYPES:
e2ds, e2dsll, cpt = eout
else:
e2ds, cpt = eout
e2dsll = None
# -------------------------------------------------------------
# calculate the noise
range1, range2 = p['IC_EXT_RANGE1'], p['IC_EXT_RANGE2']
# set the noise
noise = p['SIGDET'] * np.sqrt(range1 + range2)
# get window size
blaze_win1 = int(data2.shape[0] / 2) - p['IC_EXTFBLAZ']
blaze_win2 = int(data2.shape[0] / 2) + p['IC_EXTFBLAZ']
# get average flux per pixel
flux = np.nansum(
e2ds[blaze_win1:blaze_win2]) / (2 * p['IC_EXTFBLAZ'])
# calculate signal to noise ratio = flux/sqrt(flux + noise^2)
snr = flux / np.sqrt(flux + noise**2)
# log the SNR RMS
wmsg = 'On fiber {0} order {1}: S/N= {2:.1f} Nbcosmic= {3}'
wargs = [p['FIBER'], order_num, snr, cpt]
WLOG(p, '', wmsg.format(*wargs))
# add calculations to storage
loc['E2DS'][order_num] = e2ds
loc['E2DSFF'][order_num] = e2ds / loc['FLAT'][order_num]
loc['SNR'][order_num] = snr
# save the longfile
if p['IC_EXTRACT_TYPE'] in EXTRACT_LL_TYPES:
loc['E2DSLL'].append(e2dsll)
# set sources
loc.set_sources(['e2ds', 'SNR'], source)
# Log if saturation level reached
satvalue = (flux / p['GAIN']) / (range1 + range2)
if satvalue > (p['QC_LOC_FLUMAX'] * p['NBFRAMES']):
wmsg = 'SATURATION LEVEL REACHED on Fiber {0} order={1}'
WLOG(p, 'warning', wmsg.format(fiber, order_num))
# ------------------------------------------------------------------
# Thermal correction
# ------------------------------------------------------------------
# get fiber type
if fiber in ['AB', 'A', 'B']:
fibertype = p['DPRTYPE'].split('_')[0]
else:
fibertype = p['DPRTYPE'].split('_')[1]
# apply thermal correction based on fiber type
if fibertype in p['THERMAL_CORRECTION_TYPE1']:
# log progress
wmsg = 'Correcting thermal background for {0}={1} mode={2}'
wargs = [fiber, fibertype, 1]
WLOG(p, 'info', wmsg.format(*wargs))
# correct E2DS
tkwargs = dict(image=loc['E2DS'], mode=1, fiber=fiber, hdr=hdr)
p, loc['E2DS'] = spirouBACK.ThermalCorrect(p, **tkwargs)
# correct E2DSFF
tkwargs = dict(image=loc['E2DSFF'],
mode=1,
fiber=fiber,
hdr=hdr,
flat=loc['FLAT'])
p, loc['E2DSFF'] = spirouBACK.ThermalCorrect(p, **tkwargs)
elif fibertype in p['THERMAL_CORRECTION_TYPE2']:
# log progress
wmsg = 'Correcting thermal background for {0}={1} mode={2}'
wargs = [fiber, fibertype, 2]
WLOG(p, 'info', wmsg.format(*wargs))
# correct E2DS
tkwargs = dict(image=loc['E2DS'], mode=2, fiber=fiber, hdr=hdr)
p, loc['E2DS'] = spirouBACK.ThermalCorrect(p, **tkwargs)
# correct E2DSFF
tkwargs = dict(image=loc['E2DSFF'],
mode=2,
fiber=fiber,
hdr=hdr,
flat=loc['FLAT'])
p, loc['E2DSFF'] = spirouBACK.ThermalCorrect(p, **tkwargs)
else:
# log progress
wmsg = 'Not correcting thermal background for {0}={1}'
wargs = [fiber, fibertype]
WLOG(p, 'info', wmsg.format(*wargs))
# set filename for output
outfile = 'THERMALFILE_{0}'.format(fiber)
p[outfile] = 'None'
p.set_source(outfile, __NAME__ + '.main()')
# ------------------------------------------------------------------
# Plots
# ------------------------------------------------------------------
if p['DRS_PLOT'] > 0:
# start interactive session if needed
sPlt.start_interactive_session(p)
# plot all orders or one order
if p['IC_FF_PLOT_ALL_ORDERS']:
# plot image with all order fits (slower)
sPlt.ext_aorder_fit(p, loc, data1, max_signal / 10.)
else:
# plot image with selected order fit and edge fit (faster)
sPlt.ext_sorder_fit(p, loc, data1, max_signal / 10.)
# plot e2ds against wavelength
sPlt.ext_spectral_order_plot(p, loc)
if p['IC_EXTRACT_TYPE'] in EXTRACT_SHAPE_TYPES:
sPlt.ext_debanana_plot(p, loc, data2, max_signal / 10.)
# ----------------------------------------------------------------------
# Quality control
# ----------------------------------------------------------------------
passed, fail_msg = True, []
qc_values, qc_names, qc_logic, qc_pass = [], [], [], []
# ----------------------------------------------------------------------
# if array is completely NaNs it shouldn't pass
if np.sum(np.isfinite(loc['E2DS'])) == 0:
fail_msg.append('E2DS image is all NaNs')
passed = False
qc_pass.append(0)
else:
qc_pass.append(1)
# add to qc header lists
qc_values.append('NaN')
qc_names.append('image')
qc_logic.append('image is all NaN')
# ----------------------------------------------------------------------
# saturation check: check that the max_signal is lower than
# qc_max_signal
max_qcflux = p['QC_MAX_SIGNAL'] * p['NBFRAMES']
if max_signal > max_qcflux:
fmsg = 'Too much flux in the image ({0:.2f} > {1:.2f})'
fail_msg.append(fmsg.format(max_signal, max_qcflux))
passed = False
# Question: Why is this test ignored?
# For some reason this test is ignored in old code
passed = True
WLOG(p, 'info', fail_msg[-1])
qc_pass.append(0)
else:
qc_pass.append(1)
# add to qc header lists
qc_values.append(max_signal)
qc_names.append('max_signal')
qc_logic.append('QC_MAX_SIGNAL > {0:.3f}'.format(max_qcflux))
# finally log the failed messages and set QC = 1 if we pass the
# quality control QC = 0 if we fail quality control
if passed:
WLOG(p, 'info', 'QUALITY CONTROL SUCCESSFUL - Well Done -')
p['QC'] = 1
p.set_source('QC', __NAME__ + '/main()')
else:
for farg in fail_msg:
wmsg = 'QUALITY CONTROL FAILED: {0}'
WLOG(p, 'warning', wmsg.format(farg))
p['QC'] = 0
p.set_source('QC', __NAME__ + '/main()')
# store in qc_params
qc_params = [qc_names, qc_values, qc_logic, qc_pass]
# ------------------------------------------------------------------
# Store extraction in file(s)
# ------------------------------------------------------------------
raw_ext_file = os.path.basename(p['FITSFILENAME'])
# construct filename
e2dsfits, tag1 = spirouConfig.Constants.EXTRACT_E2DS_FILE(p)
e2dsfitsname = os.path.split(e2dsfits)[-1]
e2dsfffits, tag2 = spirouConfig.Constants.EXTRACT_E2DSFF_FILE(p)
e2dsfffitsname = os.path.split(e2dsfffits)[-1]
e2dsllfits, tag4 = spirouConfig.Constants.EXTRACT_E2DSLL_FILE(p)
e2dsfllitsname = os.path.split(e2dsllfits)[-1]
# log that we are saving E2DS spectrum
wmsg = 'Saving E2DS spectrum of Fiber {0} in {1}'
WLOG(p, '', wmsg.format(p['FIBER'], e2dsfitsname))
wmsg = 'Saving E2DSFF spectrum of Fiber {0} in {1}'
WLOG(p, '', wmsg.format(p['FIBER'], e2dsfffitsname))
# add keys from original header file
hdict = spirouImage.CopyOriginalKeys(hdr)
# set the version
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DRS_DATE'],
value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DATE_NOW'],
value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_PID'], value=p['PID'])
hdict = spirouImage.AddKey(p, hdict, p['KW_FIBER'], value=p['FIBER'])
# set the input files
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBDARK'],
value=p['DARKFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBBAD'],
value=p['BADPFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBLOCO'],
value=p['LOCOFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBBACK'],
value=p['BKGRDFILE'])
if p['IC_EXTRACT_TYPE'] not in EXTRACT_SHAPE_TYPES:
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBTILT'],
value=p['TILTFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBBLAZE'],
value=p['BLAZFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBFLAT'],
value=p['FLATFILE'])
if p['IC_EXTRACT_TYPE'] in EXTRACT_SHAPE_TYPES:
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBSHAPEX'],
value=p['SHAPEXFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBSHAPEY'],
value=p['SHAPEYFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBSHAPE'],
value=p['SHAPEFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBFPMASTER'],
value=p['FPMASTERFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBTHERMAL'],
value=p['THERMALFILE_{0}'.format(fiber)])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBWAVE'],
value=loc['WAVEFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_WAVESOURCE'],
value=loc['WSOURCE'])
hdict = spirouImage.AddKey1DList(p,
hdict,
p['KW_INFILE1'],
dim1name='file',
values=p['ARG_FILE_NAMES'])
# construct loco filename
locofile, _ = spirouConfig.Constants.EXTRACT_LOCO_FILE(p)
locofilename = os.path.basename(locofile)
# add barycentric keys to header
hdict = spirouImage.AddKey(p, hdict, p['KW_BERV'], value=loc['BERV'])
hdict = spirouImage.AddKey(p, hdict, p['KW_BJD'], value=loc['BJD'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_BERV_MAX'],
value=loc['BERV_MAX'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_B_OBS_HOUR'],
value=loc['BERVHOUR'])
# add barycentric estimate keys to header
hdict = spirouImage.AddKey(p,
hdict,
p['KW_BERV_EST'],
value=loc['BERV_EST'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_BJD_EST'],
value=loc['BJD_EST'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_BERV_MAX_EST'],
value=loc['BERV_MAX_EST'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_BERV_SOURCE'],
value=loc['BERV_SOURCE'])
# add qc parameters
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_QC'], value=p['QC'])
hdict = spirouImage.AddQCKeys(p, hdict, qc_params)
# copy extraction method and function to header
# (for reproducibility)
hdict = spirouImage.AddKey(p,
hdict,
p['KW_E2DS_EXTM'],
value=extmethod)
hdict = spirouImage.AddKey(p, hdict, p['KW_E2DS_FUNC'], value=extfunc)
# add localization file name to header
hdict = spirouImage.AddKey(p,
hdict,
p['KW_LOCO_FILE'],
value=locofilename)
# add wave solution date
hdict = spirouImage.AddKey(p,
hdict,
p['KW_WAVE_TIME1'],
value=loc['WAVE_ACQTIMES'][0])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_WAVE_TIME2'],
value=loc['WAVE_ACQTIMES'][1])
# add wave solution number of orders
hdict = spirouImage.AddKey(p,
hdict,
p['KW_WAVE_ORD_N'],
value=loc['WAVEPARAMS'].shape[0])
# add wave solution degree of fit
hdict = spirouImage.AddKey(p,
hdict,
p['KW_WAVE_LL_DEG'],
value=loc['WAVEPARAMS'].shape[1] - 1)
# -------------------------------------------------------------------------
# add keys of the wave solution FP CCF
hdict = spirouImage.AddKey(p,
hdict,
p['KW_WFP_FILE'],
value=loc['WAVEFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_WFP_DRIFT'],
value=p['WFP_DRIFT'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_WFP_FWHM'],
value=p['WFP_FWHM'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_WFP_CONTRAST'],
value=p['WFP_CONTRAST'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_WFP_MAXCPP'],
value=p['WFP_MAXCPP'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_WFP_MASK'],
value=p['WFP_MASK'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_WFP_LINES'],
value=p['WFP_LINES'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_WFP_TARG_RV'],
value=p['WFP_TARG_RV'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_WFP_WIDTH'],
value=p['WFP_WIDTH'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_WFP_STEP'],
value=p['WFP_STEP'])
# write 1D list of the SNR
hdict = spirouImage.AddKey1DList(p,
hdict,
p['KW_E2DS_SNR'],
values=loc['SNR'])
# add localization file keys to header
root = p['KW_ROOT_DRS_LOC'][0]
hdict = spirouImage.CopyRootKeys(p, hdict, locofile, root=root)
# add wave solution coefficients
hdict = spirouImage.AddKey2DList(p,
hdict,
p['KW_WAVE_PARAM'],
values=loc['WAVEPARAMS'])
# Save E2DS file
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag1)
hdict = spirouImage.AddKey(p,
hdict,
p['KW_EXT_TYPE'],
value=p['DPRTYPE'])
p = spirouImage.WriteImage(p, e2dsfits, loc['E2DS'], hdict)
# Save E2DSFF file
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag2)
hdict = spirouImage.AddKey(p,
hdict,
p['KW_EXT_TYPE'],
value=p['DPRTYPE'])
p = spirouImage.WriteImage(p, e2dsfffits, loc['E2DSFF'], hdict)
# Save E2DSLL file
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag4)
hdict = spirouImage.AddKey(p,
hdict,
p['KW_EXT_TYPE'],
value=p['DPRTYPE'])
if p['IC_EXTRACT_TYPE'] in EXTRACT_LL_TYPES:
llstack = np.vstack(loc['E2DSLL'])
p = spirouImage.WriteImage(p, e2dsllfits, llstack, hdict)
# ------------------------------------------------------------------
# 1-dimension spectral S1D (uniform in wavelength)
# ------------------------------------------------------------------
# get arguments for E2DS to S1D
e2dsargs = [loc['WAVE'], loc['E2DSFF'], loc['BLAZE']]
# get 1D spectrum
xs1d1, ys1d1 = spirouImage.E2DStoS1D(p, *e2dsargs, wgrid='wave')
# Plot the 1D spectrum
if p['DRS_PLOT'] > 0:
sPlt.ext_1d_spectrum_plot(p, xs1d1, ys1d1)
# construct file name
s1dfile1, tag3 = spirouConfig.Constants.EXTRACT_S1D_FILE1(p)
s1dfilename1 = os.path.basename(s1dfile1)
# add header keys
# set the version
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DRS_DATE'],
value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DATE_NOW'],
value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag3)
hdict = spirouImage.AddKey(p,
hdict,
p['KW_EXT_TYPE'],
value=p['DPRTYPE'])
# log writing to file
wmsg = 'Saving 1D spectrum (uniform in wavelength) for Fiber {0} in {1}'
WLOG(p, '', wmsg.format(p['FIBER'], s1dfilename1))
# Write to file
columns = ['wavelength', 'flux', 'eflux']
values = [xs1d1, ys1d1, np.zeros_like(ys1d1)]
units = ['nm', None, None]
s1d1 = spirouImage.MakeTable(p, columns, values, units=units)
spirouImage.WriteTable(p, s1d1, s1dfile1, header=hdict)
# ------------------------------------------------------------------
# 1-dimension spectral S1D (uniform in velocity)
# ------------------------------------------------------------------
# get arguments for E2DS to S1D
e2dsargs = [loc['WAVE'], loc['E2DSFF'], loc['BLAZE']]
# get 1D spectrum
xs1d2, ys1d2 = spirouImage.E2DStoS1D(p, *e2dsargs, wgrid='velocity')
# Plot the 1D spectrum
if p['DRS_PLOT'] > 0:
sPlt.ext_1d_spectrum_plot(p, xs1d2, ys1d2)
# construct file name
s1dfile2, tag4 = spirouConfig.Constants.EXTRACT_S1D_FILE2(p)
s1dfilename2 = os.path.basename(s1dfile2)
# add header keys
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DRS_DATE'],
value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DATE_NOW'],
value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag4)
hdict = spirouImage.AddKey(p,
hdict,
p['KW_EXT_TYPE'],
value=p['DPRTYPE'])
# log writing to file
wmsg = 'Saving 1D spectrum (uniform in velocity) for Fiber {0} in {1}'
WLOG(p, '', wmsg.format(p['FIBER'], s1dfilename2))
# Write to file
columns = ['wavelength', 'flux', 'eflux']
values = [xs1d2, ys1d2, np.zeros_like(ys1d2)]
units = ['nm', None, None]
s1d2 = spirouImage.MakeTable(p, columns, values, units=units)
spirouImage.WriteTable(p, s1d2, s1dfile2, header=hdict)
# ----------------------------------------------------------------------
# End Message
# ----------------------------------------------------------------------
p = spirouStartup.End(p)
# return a copy of locally defined variables in the memory
return dict(locals())
def main(night_name=None, files=None):
"""
cal_SLIT_spirou.py main function, if night_name and files are None uses
arguments from run time i.e.:
cal_SLIT_spirou.py [night_directory] [files]
:param night_name: string or None, the folder within data raw directory
containing files (also reduced directory) i.e.
/data/raw/20170710 would be "20170710" but
/data/raw/AT5/20180409 would be "AT5/20180409"
:param files: string, list or None, the list of files to use for
arg_file_names and fitsfilename
(if None assumes arg_file_names was set from run time)
:return ll: dictionary, containing all the local variables defined in
main
"""
# ----------------------------------------------------------------------
# Set up
# ----------------------------------------------------------------------
# get parameters from config files/run time args/load paths + calibdb
p = spirouStartup.Begin(recipe=__NAME__)
p = spirouStartup.LoadArguments(p, night_name, files)
p = spirouStartup.InitialFileSetup(p, calibdb=True)
# set the fiber type
p['FIB_TYP'] = 'AB'
p.set_source('FIB_TYP', __NAME__ + '/main()')
# ----------------------------------------------------------------------
# Read image file
# ----------------------------------------------------------------------
# read the image data
p, data, hdr = spirouImage.ReadImageAndCombine(p, framemath='add')
# ----------------------------------------------------------------------
# fix for un-preprocessed files
# ----------------------------------------------------------------------
data = spirouImage.FixNonPreProcess(p, data)
# ----------------------------------------------------------------------
# Get basic image properties
# ----------------------------------------------------------------------
# get sig det value
p = spirouImage.GetSigdet(p, hdr, name='sigdet')
# get exposure time
p = spirouImage.GetExpTime(p, hdr, name='exptime')
# get gain
p = spirouImage.GetGain(p, hdr, name='gain')
# ----------------------------------------------------------------------
# Correction of DARK
# ----------------------------------------------------------------------
p, datac = spirouImage.CorrectForDark(p, data, hdr)
# ----------------------------------------------------------------------
# Resize image
# ----------------------------------------------------------------------
# rotate the image and convert from ADU/s to e-
data = spirouImage.ConvertToE(spirouImage.FlipImage(p, datac), p=p)
# convert NaN to zeros
data0 = np.where(~np.isfinite(data), np.zeros_like(data), data)
# resize image
bkwargs = dict(xlow=p['IC_CCDX_LOW'], xhigh=p['IC_CCDX_HIGH'],
ylow=p['IC_CCDY_LOW'], yhigh=p['IC_CCDY_HIGH'],
getshape=False)
data2 = spirouImage.ResizeImage(p, data0, **bkwargs)
# log change in data size
WLOG(p, '', ('Image format changed to '
'{0}x{1}').format(*data2.shape))
# ----------------------------------------------------------------------
# Correct for the BADPIX mask (set all bad pixels to zero)
# ----------------------------------------------------------------------
p, data2 = spirouImage.CorrectForBadPix(p, data2, hdr)
# ----------------------------------------------------------------------
# Background computation
# ----------------------------------------------------------------------
if p['IC_DO_BKGR_SUBTRACTION']:
# log that we are doing background measurement
WLOG(p, '', 'Doing background measurement on raw frame')
# get the bkgr measurement
bargs = [p, data2, hdr]
# background, xc, yc, minlevel = spirouBACK.MeasureBackgroundFF(*bargs)
p, background = spirouBACK.MeasureBackgroundMap(*bargs)
else:
background = np.zeros_like(data2)
p['BKGRDFILE'] = 'None'
p.set_source('BKGRDFILE', __NAME__ + '.main()')
# correct data2 with background
data2 = data2 - background
# ----------------------------------------------------------------------
# Log the number of dead pixels
# ----------------------------------------------------------------------
# get the number of bad pixels
n_bad_pix = np.nansum(~np.isfinite(data2))
n_bad_pix_frac = n_bad_pix * 100 / np.product(data2.shape)
# Log number
wmsg = 'Nb dead pixels = {0} / {1:.2f} %'
WLOG(p, 'info', wmsg.format(int(n_bad_pix), n_bad_pix_frac))
# ----------------------------------------------------------------------
# Log the number of dead pixels
# ----------------------------------------------------------------------
loc = ParamDict()
# ----------------------------------------------------------------------
# Loop around fiber types
# ----------------------------------------------------------------------
# set fiber
p['FIBER'] = p['FIB_TYP']
# ------------------------------------------------------------------
# Get localisation coefficients
# ------------------------------------------------------------------
# original there is a loop but it is not used --> removed
p = spirouImage.FiberParams(p, p['FIBER'], merge=True)
# get localisation fit coefficients
p, loc = spirouLOCOR.GetCoeffs(p, hdr, loc)
# ------------------------------------------------------------------
# Calculating the tilt
# ------------------------------------------------------------------
# get the tilt by extracting the AB fibers and correlating them
loc = spirouImage.GetTilt(p, loc, data2)
# fit the tilt with a polynomial
loc = spirouImage.FitTilt(p, loc)
# log the tilt dispersion
wmsg = 'Tilt dispersion = {0:.3f} deg'
WLOG(p, 'info', wmsg.format(loc['RMS_TILT']))
# ------------------------------------------------------------------
# Plotting
# ------------------------------------------------------------------
if p['DRS_PLOT'] > 0:
# plots setup: start interactive plot
sPlt.start_interactive_session(p)
# plot image with selected order shown
sPlt.slit_sorder_plot(p, loc, data2)
# plot slit tilt angle and fit
sPlt.slit_tilt_angle_and_fit_plot(p, loc)
# end interactive section
sPlt.end_interactive_session(p)
# ------------------------------------------------------------------
# Replace tilt by the global fit
# ------------------------------------------------------------------
loc['TILT'] = loc['YFIT_TILT']
oldsource = loc.get_source('tilt')
loc.set_source('TILT', oldsource + '+{0}/main()'.format(__NAME__))
# ----------------------------------------------------------------------
# Quality control
# ----------------------------------------------------------------------
# set passed variable and fail message list
passed, fail_msg = True, []
qc_values, qc_names, qc_logic, qc_pass = [], [], [], []
# check that tilt rms is below required
if loc['RMS_TILT'] > p['QC_SLIT_RMS']:
# add failed message to fail message list
fmsg = 'abnormal RMS of SLIT angle ({0:.2f} > {1:.2f} deg)'
fail_msg.append(fmsg.format(loc['RMS_TILT'], p['QC_SLIT_RMS']))
passed = False
qc_pass.append(0)
else:
qc_pass.append(1)
# add to qc header lists
qc_values.append(loc['RMS_TILT'])
qc_names.append('RMS_TILT')
qc_logic.append('RMS_TILT > {0:.2f}'.format(p['QC_SLIT_RMS']))
# ----------------------------------------------------------------------
# check that tilt is less than max tilt required
max_tilt = np.max(loc['TILT'])
if max_tilt > p['QC_SLIT_MAX']:
# add failed message to fail message list
fmsg = 'abnormal SLIT angle ({0:.2f} > {1:.2f} deg)'
fail_msg.append(fmsg.format(max_tilt, p['QC_SLIT_MAX']))
passed = False
qc_pass.append(0)
else:
qc_pass.append(1)
# add to qc header lists
qc_values.append(max_tilt)
qc_names.append('max_tilt')
qc_logic.append('max_tilt > {0:.2f}'.format(p['QC_SLIT_MAX']))
# ----------------------------------------------------------------------
# check that tilt is greater than min tilt required
min_tilt = np.min(loc['TILT'])
if min_tilt < p['QC_SLIT_MIN']:
# add failed message to fail message list
fmsg = 'abnormal SLIT angle ({0:.2f} < {1:.2f} deg)'
fail_msg.append(fmsg.format(max_tilt, p['QC_SLIT_MIN']))
passed = False
qc_pass.append(0)
else:
qc_pass.append(1)
# add to qc header lists
qc_values.append(min_tilt)
qc_names.append('min_tilt')
qc_logic.append('min_tilt > {0:.2f}'.format(p['QC_SLIT_MIN']))
# ----------------------------------------------------------------------
# finally log the failed messages and set QC = 1 if we pass the
# quality control QC = 0 if we fail quality control
if passed:
WLOG(p, 'info', 'QUALITY CONTROL SUCCESSFUL - Well Done -')
p['QC'] = 1
p.set_source('QC', __NAME__ + '/main()')
else:
for farg in fail_msg:
wmsg = 'QUALITY CONTROL FAILED: {0}'
WLOG(p, 'warning', wmsg.format(farg))
p['QC'] = 0
p.set_source('QC', __NAME__ + '/main()')
# store in qc_params
qc_params = [qc_names, qc_values, qc_logic, qc_pass]
# ----------------------------------------------------------------------
# Save and record of tilt table
# ----------------------------------------------------------------------
# copy the tilt along the orders
tiltima = np.ones((int(loc['NUMBER_ORDERS']/2), data2.shape[1]))
tiltima *= loc['TILT'][:, None]
# get the raw tilt file name
raw_tilt_file = os.path.basename(p['FITSFILENAME'])
# construct file name and path
tiltfits, tag = spirouConfig.Constants.SLIT_TILT_FILE(p)
tiltfitsname = os.path.basename(tiltfits)
# Log that we are saving tilt file
wmsg = 'Saving tilt information in file: {0}'
WLOG(p, '', wmsg.format(tiltfitsname))
# Copy keys from fits file
hdict = spirouImage.CopyOriginalKeys(hdr)
# add version number
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_DATE'], value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DATE_NOW'], value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_PID'], value=p['PID'])
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag)
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBDARK'],
value=p['DARKFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBBAD'],
value=p['BADPFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBLOCO'], value=p['LOCOFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBBACK'],
value=p['BKGRDFILE'])
hdict = spirouImage.AddKey1DList(p, hdict, p['KW_INFILE1'], dim1name='file',
values=p['ARG_FILE_NAMES'])
# add qc parameters
# add qc parameters
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_QC'], value=p['QC'])
hdict = spirouImage.AddQCKeys(p, hdict, qc_params)
# add tilt parameters as 1d list
hdict = spirouImage.AddKey1DList(p, hdict, p['KW_TILT'], values=loc['TILT'])
# write tilt file to file
p = spirouImage.WriteImage(p, tiltfits, tiltima, hdict)
# ----------------------------------------------------------------------
# Update the calibration data base
# ----------------------------------------------------------------------
if p['QC']:
keydb = 'TILT'
# copy localisation file to the calibDB folder
spirouDB.PutCalibFile(p, tiltfits)
# update the master calib DB file with new key
spirouDB.UpdateCalibMaster(p, keydb, tiltfitsname, hdr)
# ----------------------------------------------------------------------
# End Message
# ----------------------------------------------------------------------
p = spirouStartup.End(p)
# return a copy of locally defined variables in the memory
return dict(locals())
def dark_setup(night_name, files):
# ----------------------------------------------------------------------
# Set up
# ----------------------------------------------------------------------
# get parameters from config files/run time args/load paths + calibdb
p = spirouStartup.Begin(recipe=__NAME__)
p = spirouStartup.LoadArguments(p, night_name, files)
p = spirouStartup.InitialFileSetup(p)
# ----------------------------------------------------------------------
# Read image file
# ----------------------------------------------------------------------
# read the image data
p, data, hdr = spirouImage.ReadImageAndCombine(p, framemath='average')
# ----------------------------------------------------------------------
# fix for un-preprocessed files
# ----------------------------------------------------------------------
data = spirouImage.FixNonPreProcess(p, data)
# ----------------------------------------------------------------------
# Get basic image properties
# ----------------------------------------------------------------------
# get sig det value
p = spirouImage.GetSigdet(p, hdr, name='sigdet')
# get exposure time
p = spirouImage.GetExpTime(p, hdr, name='exptime')
# get gain
p = spirouImage.GetGain(p, hdr, name='gain')
# ----------------------------------------------------------------------
# Dark exposure time check
# ----------------------------------------------------------------------
# log the Dark exposure time
WLOG(p, 'info', 'Dark Time = {0:.3f} s'.format(p['EXPTIME']))
# Quality control: make sure the exposure time is longer than qc_dark_time
if p['EXPTIME'] < p['QC_DARK_TIME']:
emsg = 'Dark exposure time too short (< {0:.1f} s)'
WLOG(p, 'error', emsg.format(p['QC_DARK_TIME']))
# ----------------------------------------------------------------------
# Resize image
# ----------------------------------------------------------------------
# # rotate the image and conver from ADU/s to e-
# data = data[::-1, ::-1] * p['exptime'] * p['gain']
# convert NaN to zeros
nanmask = ~np.isfinite(data)
data = np.where(nanmask, np.zeros_like(data), data)
# resize blue image
bkwargs = dict(xlow=p['IC_CCDX_BLUE_LOW'],
xhigh=p['IC_CCDX_BLUE_HIGH'],
ylow=p['IC_CCDY_BLUE_LOW'],
yhigh=p['IC_CCDY_BLUE_HIGH'])
datablue, nx2, ny2 = spirouImage.ResizeImage(p, data, **bkwargs)
# Make sure we have data in the blue image
if nx2 == 0 or ny2 == 0:
WLOG(p, 'error', ('IC_CCD(X/Y)_BLUE_(LOW/HIGH) remove '
'all pixels from image.'))
# resize red image
rkwargs = dict(xlow=p['IC_CCDX_RED_LOW'],
xhigh=p['IC_CCDX_RED_HIGH'],
ylow=p['IC_CCDY_RED_LOW'],
yhigh=p['IC_CCDY_RED_HIGH'])
datared, nx3, ny3 = spirouImage.ResizeImage(p, data, **rkwargs)
# Make sure we have data in the red image
if nx3 == 0 or ny3 == 0:
WLOG(p, 'error', ('IC_CCD(X/Y)_RED_(LOW/HIGH) remove '
'all pixels from image.'))
# ----------------------------------------------------------------------
# Dark Measurement
# ----------------------------------------------------------------------
# Log that we are doing dark measurement
WLOG(p, '', 'Doing Dark measurement')
# measure dark for whole frame
p = spirouImage.MeasureDark(p, data, 'Whole det', 'full')
# measure dark for blue part
p = spirouImage.MeasureDark(p, datablue, 'Blue part', 'blue')
# measure dark for rede part
p = spirouImage.MeasureDark(p, datared, 'Red part', 'red')
# get stats
stats1 = [
data.size,
np.nansum(~np.isfinite(data)),
np.nanmedian(data),
np.nansum(~np.isfinite(data)) * 100 / np.product(data.shape),
p['DADEAD_FULL'], datablue.size,
np.nansum(~np.isfinite(datablue)),
np.nanmedian(datablue),
np.nansum(~np.isfinite(datablue)) * 100 / np.product(datablue.shape),
p['DADEAD_BLUE'], datared.size,
np.nansum(~np.isfinite(datared)),
np.nanmedian(datared),
np.nansum(~np.isfinite(datared)) * 100 / np.product(datared.shape),
p['DADEAD_RED']
]
return stats1
def main(night_name=None, files=None):
"""
cal_loc_RAW_spirou.py main function, if night_name and files are None uses
arguments from run time i.e.:
cal_loc_RAW_spirou.py [night_name] [files]
:param night_name: string or None, the folder within data raw directory
containing files (also reduced directory) i.e.
/data/raw/20170710 would be "20170710" but
/data/raw/AT5/20180409 would be "AT5/20180409"
:param files: string, list or None, the list of files to use for
arg_file_names and fitsfilename
(if None assumes arg_file_names was set from run time)
:return ll: dictionary, containing all the local variables defined in
main
"""
# ----------------------------------------------------------------------
# Set up
# ----------------------------------------------------------------------
# get parameters from config files/run time args/load paths + calibdb
p = spirouStartup.Begin(recipe=__NAME__)
p = spirouStartup.LoadArguments(p, night_name, files)
p = spirouStartup.InitialFileSetup(p, calibdb=True)
# ----------------------------------------------------------------------
# Read image file
# ----------------------------------------------------------------------
# read the image data
p, data, hdr = spirouImage.ReadImageAndCombine(p, framemath='add')
# ----------------------------------------------------------------------
# fix for un-preprocessed files
# ----------------------------------------------------------------------
data = spirouImage.FixNonPreProcess(p, data)
# ----------------------------------------------------------------------
# Get basic image properties
# ----------------------------------------------------------------------
# get sig det value
p = spirouImage.GetSigdet(p, hdr, name='sigdet')
# get exposure time
p = spirouImage.GetExpTime(p, hdr, name='exptime')
# get gain
p = spirouImage.GetGain(p, hdr, name='gain')
# ----------------------------------------------------------------------
# Correction of DARK
# ----------------------------------------------------------------------
p, datac = spirouImage.CorrectForDark(p, data, hdr)
# ----------------------------------------------------------------------
# Interpolation over bad regions (to fill in the holes)
# ----------------------------------------------------------------------
# log process
# wmsg = 'Interpolating over bad regions'
# WLOG(p, '', wmsg)
# run interpolation
# datac = spirouImage.InterpolateBadRegions(p, datac)
# ----------------------------------------------------------------------
# Resize image
# ----------------------------------------------------------------------
# rotate the image and convert from ADU/s to e-
data = spirouImage.ConvertToE(spirouImage.FlipImage(p, datac), p=p)
# convert NaN to zeros
data0 = np.where(~np.isfinite(data), np.zeros_like(data), data)
# resize image
bkwargs = dict(xlow=p['IC_CCDX_LOW'],
xhigh=p['IC_CCDX_HIGH'],
ylow=p['IC_CCDY_LOW'],
yhigh=p['IC_CCDY_HIGH'],
getshape=False)
data2 = spirouImage.ResizeImage(p, data0, **bkwargs)
# log change in data size
WLOG(p, '', ('Image format changed to ' '{0}x{1}').format(*data2.shape))
# ----------------------------------------------------------------------
# Correct for the BADPIX mask (set all bad pixels to zero)
# ----------------------------------------------------------------------
p, data2 = spirouImage.CorrectForBadPix(p, data2, hdr)
# ----------------------------------------------------------------------
# Background computation
# ----------------------------------------------------------------------
if p['IC_DO_BKGR_SUBTRACTION']:
# log that we are doing background measurement
WLOG(p, '', 'Doing background measurement on raw frame')
# get the bkgr measurement
bargs = [p, data2, hdr]
# background, xc, yc, minlevel = spirouBACK.MeasureBackgroundFF(*bargs)
p, background = spirouBACK.MeasureBackgroundMap(*bargs)
else:
background = np.zeros_like(data2)
p['BKGRDFILE'] = 'None'
p.set_source('BKGRDFILE', __NAME__ + '.main()')
# apply background correction to data
data2 = data2 - background
# ----------------------------------------------------------------------
# Construct image order_profile
# ----------------------------------------------------------------------
# log that we are doing background measurement
WLOG(p, '', 'Creating Order Profile')
order_profile = spirouLOCOR.BoxSmoothedImage(data2, p['LOC_BOX_SIZE'])
# data 2 is now set to the order profile
data2o = data2.copy()
data2 = order_profile.copy()
# ----------------------------------------------------------------------
# Write image order_profile to file
# ----------------------------------------------------------------------
# Construct folder and filename
rawfits, tag1 = spirouConfig.Constants.LOC_ORDER_PROFILE_FILE(p)
rawfitsname = os.path.split(rawfits)[-1]
# log saving order profile
wmsg = 'Saving processed raw frame in {0}'
WLOG(p, '', wmsg.format(rawfitsname))
# add keys from original header file
hdict = spirouImage.CopyOriginalKeys(hdr)
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_DATE'], value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DATE_NOW'], value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag1)
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBDARK'], value=p['DARKFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBBAD'], value=p['BADPFILE'])
# write to file
p = spirouImage.WriteImage(p, rawfits, order_profile, hdict)
# ----------------------------------------------------------------------
# Move order_profile to calibDB and update calibDB
# ----------------------------------------------------------------------
# set key for calibDB
keydb = 'ORDER_PROFILE_{0}'.format(p['FIBER'])
# copy dark fits file to the calibDB folder
spirouDB.PutCalibFile(p, rawfits)
# update the master calib DB file with new key
spirouDB.UpdateCalibMaster(p, keydb, rawfitsname, hdr)
# ######################################################################
# Localization of orders on central column
# ######################################################################
# storage dictionary for localization parameters
loc = ParamDict()
# Plots setup: start interactive plot
if p['DRS_PLOT'] > 0:
sPlt.start_interactive_session(p)
# ----------------------------------------------------------------------
# Measurement and correction of background on the central column
# ----------------------------------------------------------------------
loc = spirouBACK.MeasureBkgrdGetCentPixs(p, loc, data2)
# ----------------------------------------------------------------------
# Search for order center on the central column - quick estimation
# ----------------------------------------------------------------------
# log progress
WLOG(p, '', 'Searching order center on central column')
# plot the minimum of ycc and ic_locseuil if in debug and plot mode
if p['DRS_DEBUG'] > 0 and p['DRS_PLOT']:
sPlt.debug_locplot_min_ycc_loc_threshold(p, loc['YCC'])
# find the central positions of the orders in the central
posc_all = spirouLOCOR.FindPosCentCol(loc['YCC'], p['IC_LOCSEUIL'])
# depending on the fiber type we may need to skip some pixels and also
# we need to add back on the ic_offset applied
start = p['IC_FIRST_ORDER_JUMP']
posc = posc_all[start:] + p['IC_OFFSET']
# work out the number of orders to use (minimum of ic_locnbmaxo and number
# of orders found in 'LocateCentralOrderPositions')
number_of_orders = np.min([p['IC_LOCNBMAXO'], len(posc)])
# log the number of orders than have been detected
wargs = [p['FIBER'], int(number_of_orders / p['NBFIB']), p['NBFIB']]
WLOG(p, 'info', ('On fiber {0} {1} orders have been detected '
'on {2} fiber(s)').format(*wargs))
# ----------------------------------------------------------------------
# Search for order center and profile on specific columns
# ----------------------------------------------------------------------
# get fit polynomial orders for position and width
fitpos, fitwid = p['IC_LOCDFITC'], p['IC_LOCDFITW']
# Create arrays to store position and width of order for each order
loc['CTRO'] = np.zeros((number_of_orders, data2.shape[1]), dtype=float)
loc['SIGO'] = np.zeros((number_of_orders, data2.shape[1]), dtype=float)
# Create arrays to store coefficients for position and width
loc['ACC'] = np.zeros((number_of_orders, fitpos + 1))
loc['ASS'] = np.zeros((number_of_orders, fitpos + 1))
# Create arrays to store rms values for position and width
loc['RMS_CENTER'] = np.zeros(number_of_orders)
loc['RMS_FWHM'] = np.zeros(number_of_orders)
# Create arrays to store point to point max value for position and width
loc['MAX_PTP_CENTER'] = np.zeros(number_of_orders)
loc['MAX_PTP_FRACCENTER'] = np.zeros(number_of_orders)
loc['MAX_PTP_FWHM'] = np.zeros(number_of_orders)
loc['MAX_PTP_FRACFWHM'] = np.zeros(number_of_orders)
# Create arrays to store rejected points
loc['MAX_RMPTS_POS'] = np.zeros(number_of_orders)
loc['MAX_RMPTS_WID'] = np.zeros(number_of_orders)
# set the central col centers in the cpos_orders array
loc['CTRO'][:, p['IC_CENT_COL']] = posc[0:number_of_orders]
# set source for all locs
loc.set_all_sources(__NAME__ + '/main()')
# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
# storage for plotting
loc['XPLOT'], loc['YPLOT'] = [], []
# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
# loop around each order
rorder_num = 0
for order_num in range(number_of_orders):
# find the row centers of the columns
loc = spirouLOCOR.FindOrderCtrs(p, data2, loc, order_num)
# only keep the orders with non-zero width
mask = loc['SIGO'][order_num, :] != 0
loc['X'] = np.arange(data2.shape[1])[mask]
loc.set_source('X', __NAME__ + '/main()')
# check that we have enough data points to fit data
if len(loc['X']) > (fitpos + 1):
# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
# initial fit params
iofargs = [p, loc, mask, rorder_num]
# initial fit for center positions for this order
loc, cf_data = spirouLOCOR.InitialOrderFit(*iofargs, kind='center')
# initial fit for widths for this order
loc, wf_data = spirouLOCOR.InitialOrderFit(*iofargs, kind='fwhm')
# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
# Log order number and fit at central pixel and width and rms
wargs = [
rorder_num, cf_data['cfitval'], wf_data['cfitval'],
cf_data['rms']
]
WLOG(p, '', ('ORDER: {0} center at pixel {1:.1f} width '
'{2:.1f} rms {3:.3f}').format(*wargs))
# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
# sigma fit params
sigfargs = [p, loc, cf_data, mask, order_num, rorder_num]
# sigma clip fit for center positions for this order
cf_data = spirouLOCOR.SigClipOrderFit(*sigfargs, kind='center')
# load results into storage arrags for this order
loc['ACC'][rorder_num] = cf_data['a']
loc['RMS_CENTER'][rorder_num] = cf_data['rms']
loc['MAX_PTP_CENTER'][rorder_num] = cf_data['max_ptp']
loc['MAX_PTP_FRACCENTER'][rorder_num] = cf_data['max_ptp_frac']
loc['MAX_RMPTS_POS'][rorder_num] = cf_data['max_rmpts']
# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
# sigma fit params
sigfargs = [p, loc, wf_data, mask, order_num, rorder_num]
# sigma clip fit for width positions for this order
wf_data = spirouLOCOR.SigClipOrderFit(*sigfargs, kind='fwhm')
# load results into storage arrags for this order
loc['ASS'][rorder_num] = wf_data['a']
loc['RMS_FWHM'][rorder_num] = wf_data['rms']
loc['MAX_PTP_FWHM'][rorder_num] = wf_data['max_ptp']
loc['MAX_PTP_FRACFWHM'][rorder_num] = wf_data['max_ptp_frac']
loc['MAX_RMPTS_WID'][rorder_num] = wf_data['max_rmpts']
# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
# increase the roder_num iterator
rorder_num += 1
# else log that the order is unusable
else:
WLOG(p, '', 'Order found too much incomplete, discarded')
# ----------------------------------------------------------------------
# Plot the image (ready for fit points to be overplotted later)
if p['DRS_PLOT'] > 0:
# get saturation threshold
satseuil = p['IC_SATSEUIL'] * p['GAIN'] * p['NBFRAMES']
# plot image above saturation threshold
sPlt.locplot_im_sat_threshold(p, loc, data2, satseuil)
# ----------------------------------------------------------------------
# Log that order geometry has been measured
WLOG(p, 'info', ('On fiber {0} {1} orders geometry have been '
'measured').format(p['FIBER'], rorder_num))
# Get mean rms
mean_rms_center = np.nansum(
loc['RMS_CENTER'][:rorder_num]) * 1000 / rorder_num
mean_rms_fwhm = np.nansum(loc['RMS_FWHM'][:rorder_num]) * 1000 / rorder_num
# Log mean rms values
wmsg = 'Average uncertainty on {0}: {1:.2f} [mpix]'
WLOG(p, 'info', wmsg.format('position', mean_rms_center))
WLOG(p, 'info', wmsg.format('width', mean_rms_fwhm))
# ----------------------------------------------------------------------
# Plot of RMS for positions and widths
# ----------------------------------------------------------------------
if p['DRS_PLOT'] > 0:
sPlt.locplot_order_number_against_rms(p, loc, rorder_num)
# ----------------------------------------------------------------------
# Quality control
# ----------------------------------------------------------------------
passed, fail_msg = True, []
qc_values, qc_names, qc_logic, qc_pass = [], [], [], []
# ----------------------------------------------------------------------
# check that max number of points rejected in center fit is below threshold
if np.nansum(loc['MAX_RMPTS_POS']) > p['QC_LOC_MAXLOCFIT_REMOVED_CTR']:
fmsg = 'abnormal points rejection during ctr fit ({0:.2f} > {1:.2f})'
fail_msg.append(
fmsg.format(np.nansum(loc['MAX_RMPTS_POS']),
p['QC_LOC_MAXLOCFIT_REMOVED_CTR']))
passed = False
qc_pass.append(0)
else:
qc_pass.append(1)
# add to qc header lists
qc_values.append(np.nansum(loc['MAX_RMPTS_POS']))
qc_names.append('sum(MAX_RMPTS_POS)')
qc_logic.append('sum(MAX_RMPTS_POS) > {0:.2f}'
''.format(p['QC_LOC_MAXLOCFIT_REMOVED_CTR']))
# ----------------------------------------------------------------------
# check that max number of points rejected in width fit is below threshold
if np.nansum(loc['MAX_RMPTS_WID']) > p['QC_LOC_MAXLOCFIT_REMOVED_WID']:
fmsg = 'abnormal points rejection during width fit ({0:.2f} > {1:.2f})'
fail_msg.append(
fmsg.format(np.nansum(loc['MAX_RMPTS_WID']),
p['QC_LOC_MAXLOCFIT_REMOVED_WID']))
passed = False
qc_pass.append(0)
else:
qc_pass.append(1)
# add to qc header lists
qc_values.append(np.nansum(loc['MAX_RMPTS_WID']))
qc_names.append('sum(MAX_RMPTS_WID)')
qc_logic.append('sum(MAX_RMPTS_WID) > {0:.2f}'
''.format(p['QC_LOC_MAXLOCFIT_REMOVED_WID']))
# ----------------------------------------------------------------------
# check that the rms in center fit is lower than qc threshold
if mean_rms_center > p['QC_LOC_RMSMAX_CENTER']:
fmsg = 'too high rms on center fitting ({0:.2f} > {1:.2f})'
fail_msg.append(fmsg.format(mean_rms_center,
p['QC_LOC_RMSMAX_CENTER']))
passed = False
qc_pass.append(0)
else:
qc_pass.append(1)
# add to qc header lists
qc_values.append(mean_rms_center)
qc_names.append('mean_rms_center')
qc_logic.append('mean_rms_center > {0:.2f}'
''.format(p['QC_LOC_RMSMAX_CENTER']))
# ----------------------------------------------------------------------
# check that the rms in center fit is lower than qc threshold
if mean_rms_fwhm > p['QC_LOC_RMSMAX_FWHM']:
fmsg = 'too high rms on profile fwhm fitting ({0:.2f} > {1:.2f})'
fail_msg.append(fmsg.format(mean_rms_fwhm, p['QC_LOC_RMSMAX_CENTER']))
passed = False
qc_pass.append(0)
else:
qc_pass.append(1)
# add to qc header lists
qc_values.append(mean_rms_fwhm)
qc_names.append('mean_rms_fwhm')
qc_logic.append('mean_rms_fwhm > {0:.2f}'
''.format(p['QC_LOC_RMSMAX_CENTER']))
# ----------------------------------------------------------------------
# check for abnormal number of identified orders
if rorder_num != p['QC_LOC_NBO']:
fmsg = ('abnormal number of identified orders (found {0:.2f} '
'expected {1:.2f})')
fail_msg.append(fmsg.format(rorder_num, p['QC_LOC_NBO']))
passed = False
qc_pass.append(0)
else:
qc_pass.append(1)
# add to qc header lists
qc_values.append(rorder_num)
qc_names.append('rorder_num')
qc_logic.append('rorder_num != {0:.2f}'.format(p['QC_LOC_NBO']))
# ----------------------------------------------------------------------
# finally log the failed messages and set QC = 1 if we pass the
# quality control QC = 0 if we fail quality control
if passed:
WLOG(p, 'info', 'QUALITY CONTROL SUCCESSFUL - Well Done -')
p['QC'] = 1
p.set_source('QC', __NAME__ + '/main()')
else:
for farg in fail_msg:
wmsg = 'QUALITY CONTROL FAILED: {0}'
WLOG(p, 'warning', wmsg.format(farg))
p['QC'] = 0
p.set_source('QC', __NAME__ + '/main()')
# store in qc_params
qc_params = [qc_names, qc_values, qc_logic, qc_pass]
# ----------------------------------------------------------------------
# Save and record of image of localization with order center and keywords
# ----------------------------------------------------------------------
raw_loco_file = os.path.basename(p['FITSFILENAME'])
# construct filename
locofits, tag2 = spirouConfig.Constants.LOC_LOCO_FILE(p)
locofitsname = os.path.split(locofits)[-1]
# log that we are saving localization file
WLOG(p, '', ('Saving localization information '
'in file: {0}').format(locofitsname))
# add keys from original header file
hdict = spirouImage.CopyOriginalKeys(hdr)
# define new keys to add
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_DATE'], value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DATE_NOW'], value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_PID'], value=p['PID'])
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag2)
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBDARK'], value=p['DARKFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBBAD'], value=p['BADPFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBLOCO'], value=raw_loco_file)
hdict = spirouImage.AddKey(p, hdict, p['KW_CCD_SIGDET'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CCD_CONAD'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_LOCO_BCKGRD'],
value=loc['MEAN_BACKGRD'])
hdict = spirouImage.AddKey(p, hdict, p['KW_LOCO_NBO'], value=rorder_num)
hdict = spirouImage.AddKey(p,
hdict,
p['KW_LOCO_DEG_C'],
value=p['IC_LOCDFITC'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_LOCO_DEG_W'],
value=p['IC_LOCDFITW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_LOCO_DEG_E'])
hdict = spirouImage.AddKey(p, hdict, p['KW_LOCO_DELTA'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_LOC_MAXFLX'],
value=float(loc['MAX_SIGNAL']))
hdict = spirouImage.AddKey(p,
hdict,
p['KW_LOC_SMAXPTS_CTR'],
value=np.nansum(loc['MAX_RMPTS_POS']))
hdict = spirouImage.AddKey(p,
hdict,
p['KW_LOC_SMAXPTS_WID'],
value=np.nansum(loc['MAX_RMPTS_WID']))
hdict = spirouImage.AddKey(p,
hdict,
p['KW_LOC_RMS_CTR'],
value=mean_rms_center)
hdict = spirouImage.AddKey(p,
hdict,
p['KW_LOC_RMS_WID'],
value=mean_rms_fwhm)
# write 2D list of position fit coefficients
hdict = spirouImage.AddKey2DList(p,
hdict,
p['KW_LOCO_CTR_COEFF'],
values=loc['ACC'][0:rorder_num])
# write 2D list of width fit coefficients
hdict = spirouImage.AddKey2DList(p,
hdict,
p['KW_LOCO_FWHM_COEFF'],
values=loc['ASS'][0:rorder_num])
# add qc parameters
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_QC'], value=p['QC'])
hdict = spirouImage.AddQCKeys(p, hdict, qc_params)
# write center fits and add header keys (via hdict)
center_fits = spirouLOCOR.CalcLocoFits(loc['ACC'], data2.shape[1])
p = spirouImage.WriteImage(p, locofits, center_fits, hdict)
# ----------------------------------------------------------------------
# Save and record of image of sigma
# ----------------------------------------------------------------------
# construct filename
locofits2, tag3 = spirouConfig.Constants.LOC_LOCO_FILE2(p)
locofits2name = os.path.split(locofits2)[-1]
# log that we are saving localization file
wmsg = 'Saving FWHM information in file: {0}'
WLOG(p, '', wmsg.format(locofits2name))
# add keys from original header file
hdict = spirouImage.CopyOriginalKeys(hdr)
# define new keys to add
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_DATE'], value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DATE_NOW'], value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag3)
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBDARK'], value=p['DARKFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBBAD'], value=p['BADPFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBBACK'], value=p['BKGRDFILE'])
hdict = spirouImage.AddKey1DList(p,
hdict,
p['KW_INFILE1'],
dim1name='file',
values=p['ARG_FILE_NAMES'])
# add outputs
hdict = spirouImage.AddKey(p, hdict, p['KW_CCD_SIGDET'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CCD_CONAD'])
hdict = spirouImage.AddKey(p, hdict, p['KW_LOCO_NBO'], value=rorder_num)
hdict = spirouImage.AddKey(p,
hdict,
p['KW_LOCO_DEG_C'],
value=p['IC_LOCDFITC'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_LOCO_DEG_W'],
value=p['IC_LOCDFITW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_LOCO_DEG_E'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_LOC_MAXFLX'],
value=float(loc['MAX_SIGNAL']))
hdict = spirouImage.AddKey(p,
hdict,
p['KW_LOC_SMAXPTS_CTR'],
value=np.nansum(loc['MAX_RMPTS_POS']))
hdict = spirouImage.AddKey(p,
hdict,
p['KW_LOC_SMAXPTS_WID'],
value=np.nansum(loc['MAX_RMPTS_WID']))
hdict = spirouImage.AddKey(p,
hdict,
p['KW_LOC_RMS_CTR'],
value=mean_rms_center)
hdict = spirouImage.AddKey(p,
hdict,
p['KW_LOC_RMS_WID'],
value=mean_rms_fwhm)
# write 2D list of position fit coefficients
hdict = spirouImage.AddKey2DList(p,
hdict,
p['KW_LOCO_CTR_COEFF'],
values=loc['ACC'][0:rorder_num])
# write 2D list of width fit coefficients
hdict = spirouImage.AddKey2DList(p,
hdict,
p['KW_LOCO_FWHM_COEFF'],
values=loc['ASS'][0:rorder_num])
# add quality control
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_QC'], value=p['QC'])
# write image and add header keys (via hdict)
width_fits = spirouLOCOR.CalcLocoFits(loc['ASS'], data2.shape[1])
p = spirouImage.WriteImage(p, locofits2, width_fits, hdict)
# ----------------------------------------------------------------------
# Save and Record of image of localization
# ----------------------------------------------------------------------
if p['IC_LOCOPT1']:
# construct filename
locofits3, tag4 = spirouConfig.Constants.LOC_LOCO_FILE3(p)
locofits3name = os.path.split(locofits3)[-1]
# log that we are saving localization file
wmsg1 = 'Saving localization image with superposition of orders in '
wmsg2 = 'file: {0}'.format(locofits3name)
WLOG(p, '', [wmsg1, wmsg2])
# superpose zeros over the fit in the image
data4 = spirouLOCOR.ImageLocSuperimp(data2o, loc['ACC'][0:rorder_num])
# save this image to file
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DRS_DATE'],
value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DATE_NOW'],
value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_FIBER'], value=p['FIBER'])
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag4)
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBDARK'],
value=p['DARKFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBBAD'],
value=p['BADPFILE'])
p = spirouImage.WriteImage(p, locofits3, data4, hdict)
# ----------------------------------------------------------------------
# Update the calibration database
# ----------------------------------------------------------------------
if p['QC'] == 1:
keydb = 'LOC_' + p['FIBER']
# copy localisation file to the calibDB folder
spirouDB.PutCalibFile(p, locofits)
# update the master calib DB file with new key
spirouDB.UpdateCalibMaster(p, keydb, locofitsname, hdr)
# ----------------------------------------------------------------------
# End Message
# ----------------------------------------------------------------------
p = spirouStartup.End(p)
# return a copy of locally defined variables in the memory
return dict(locals())
def main(night_name=None, files=None):
"""
cal_DARK_spirou.py main function, if night_name and files are None uses
arguments from run time i.e.:
cal_DARK_spirou.py [night_directory] [fitsfilename]
:param night_name: string or None, the folder within data raw directory
containing files (also reduced directory) i.e.
/data/raw/20170710 would be "20170710" but
/data/raw/AT5/20180409 would be "AT5/20180409"
:param files: string, list or None, the list of files to use for
arg_file_names and fitsfilename
(if None assumes arg_file_names was set from run time)
:return ll: dictionary, containing all the local variables defined in
main
"""
# ----------------------------------------------------------------------
# Set up
# ----------------------------------------------------------------------
# get parameters from config files/run time args/load paths + calibdb
p = spirouStartup.Begin(recipe=__NAME__)
p = spirouStartup.LoadArguments(p, night_name, files)
p = spirouStartup.InitialFileSetup(p)
# ----------------------------------------------------------------------
# Read image file
# ----------------------------------------------------------------------
# read the image data
p, data, hdr = spirouImage.ReadImageAndCombine(p, framemath='average')
# ----------------------------------------------------------------------
# fix for un-preprocessed files
# ----------------------------------------------------------------------
data = spirouImage.FixNonPreProcess(p, data)
# ----------------------------------------------------------------------
# Get basic image properties
# ----------------------------------------------------------------------
# get sig det value
p = spirouImage.GetSigdet(p, hdr, name='sigdet')
# get exposure time
p = spirouImage.GetExpTime(p, hdr, name='exptime')
# get gain
p = spirouImage.GetGain(p, hdr, name='gain')
# ----------------------------------------------------------------------
# Dark exposure time check
# ----------------------------------------------------------------------
# log the Dark exposure time
WLOG(p, 'info', 'Dark Time = {0:.3f} s'.format(p['EXPTIME']))
# Quality control: make sure the exposure time is longer than qc_dark_time
if p['EXPTIME'] < p['QC_DARK_TIME']:
emsg = 'Dark exposure time too short (< {0:.1f} s)'
WLOG(p, 'error', emsg.format(p['QC_DARK_TIME']))
# ----------------------------------------------------------------------
# Resize image
# ----------------------------------------------------------------------
# # rotate the image and conver from ADU/s to e-
# data = data[::-1, ::-1] * p['exptime'] * p['gain']
# convert NaN to zeros
nanmask = ~np.isfinite(data)
data0 = np.where(nanmask, np.zeros_like(data), data)
# resize blue image
bkwargs = dict(xlow=p['IC_CCDX_BLUE_LOW'],
xhigh=p['IC_CCDX_BLUE_HIGH'],
ylow=p['IC_CCDY_BLUE_LOW'],
yhigh=p['IC_CCDY_BLUE_HIGH'])
datablue, nx2, ny2 = spirouImage.ResizeImage(p, data, **bkwargs)
# Make sure we have data in the blue image
if nx2 == 0 or ny2 == 0:
WLOG(p, 'error', ('IC_CCD(X/Y)_BLUE_(LOW/HIGH) remove '
'all pixels from image.'))
# resize red image
rkwargs = dict(xlow=p['IC_CCDX_RED_LOW'],
xhigh=p['IC_CCDX_RED_HIGH'],
ylow=p['IC_CCDY_RED_LOW'],
yhigh=p['IC_CCDY_RED_HIGH'])
datared, nx3, ny3 = spirouImage.ResizeImage(p, data, **rkwargs)
# Make sure we have data in the red image
if nx3 == 0 or ny3 == 0:
WLOG(p, 'error', ('IC_CCD(X/Y)_RED_(LOW/HIGH) remove '
'all pixels from image.'))
# ----------------------------------------------------------------------
# Dark Measurement
# ----------------------------------------------------------------------
# Log that we are doing dark measurement
WLOG(p, '', 'Doing Dark measurement')
# measure dark for whole frame
p = spirouImage.MeasureDark(p, data, 'Whole det', 'full')
# measure dark for blue part
p = spirouImage.MeasureDark(p, datablue, 'Blue part', 'blue')
# measure dark for rede part
p = spirouImage.MeasureDark(p, datared, 'Red part', 'red')
# ----------------------------------------------------------------------
# Identification of bad pixels
# ----------------------------------------------------------------------
# get number of bad dark pixels (as a fraction of total pixels)
with warnings.catch_warnings(record=True) as w:
baddark = 100.0 * np.sum(data0 > p['DARK_CUTLIMIT'])
baddark /= np.product(data0.shape)
# log the fraction of bad dark pixels
wmsg = 'Frac pixels with DARK > {0:.2f} ADU/s = {1:.3f} %'
WLOG(p, 'info', wmsg.format(p['DARK_CUTLIMIT'], baddark))
# define mask for values above cut limit or NaN
with warnings.catch_warnings(record=True) as w:
datacutmask = ~((data0 > p['DARK_CUTLIMIT']) | (~np.isfinite(data)))
spirouCore.spirouLog.warninglogger(p, w)
# get number of pixels above cut limit or NaN
n_bad_pix = np.product(data.shape) - np.nansum(datacutmask)
# work out fraction of dead pixels + dark > cut, as percentage
p['DADEADALL'] = n_bad_pix * 100 / np.product(data.shape)
p.set_source('DADEADALL', __NAME__ + '/main()')
# log fraction of dead pixels + dark > cut
logargs = [p['DARK_CUTLIMIT'], p['DADEADALL']]
WLOG(p, 'info', ('Total Frac dead pixels (N.A.N) + DARK > '
'{0:.2f} ADU/s = {1:.3f} %').format(*logargs))
# ----------------------------------------------------------------------
# Plots
# ----------------------------------------------------------------------
if p['DRS_PLOT'] > 0:
# start interactive plot
sPlt.start_interactive_session(p)
# plot the image with blue and red regions
sPlt.darkplot_image_and_regions(p, data)
# plot histograms
sPlt.darkplot_histograms(p)
# end interactive session
sPlt.end_interactive_session(p)
# ----------------------------------------------------------------------
# Quality control
# ----------------------------------------------------------------------
# set passed variable and fail message list
passed, fail_msg = True, []
qc_values, qc_names, qc_logic, qc_pass = [], [], [], []
# ----------------------------------------------------------------------
# check that med < qc_max_darklevel
if p['MED_FULL'] > p['QC_MAX_DARKLEVEL']:
# add failed message to fail message list
fmsg = 'Unexpected Median Dark level ({0:5.2f} > {1:5.2f} ADU/s)'
fail_msg.append(fmsg.format(p['MED_FULL'], p['QC_MAX_DARKLEVEL']))
passed = False
qc_pass.append(0)
else:
qc_pass.append(1)
# add to qc header lists
qc_values.append(p['MED_FULL'])
qc_names.append('MED_FULL')
qc_logic.append('MED_FULL > {0:.2f}'.format(p['QC_MAX_DARKLEVEL']))
# ----------------------------------------------------------------------
# check that fraction of dead pixels < qc_max_dead
if p['DADEADALL'] > p['QC_MAX_DEAD']:
# add failed message to fail message list
fmsg = 'Unexpected Fraction of dead pixels ({0:5.2f} > {1:5.2f} %)'
fail_msg.append(fmsg.format(p['DADEADALL'], p['QC_MAX_DEAD']))
passed = False
qc_pass.append(0)
else:
qc_pass.append(1)
# add to qc header lists
qc_values.append(p['DADEADALL'])
qc_names.append('DADEADALL')
qc_logic.append('DADEADALL > {0:.2f}'.format(p['QC_MAX_DEAD']))
# ----------------------------------------------------------------------
# checl that the precentage of dark pixels < qc_max_dark
if baddark > p['QC_MAX_DARK']:
fmsg = ('Unexpected Fraction of dark pixels > {0:.2f} ADU/s '
'({1:.2f} > {2:.2f}')
fail_msg.append(
fmsg.format(p['DARK_CUTLIMIT'], baddark, p['QC_MAX_DARK']))
passed = False
qc_pass.append(0)
else:
qc_pass.append(1)
# add to qc header lists
qc_values.append(baddark)
qc_names.append('baddark')
qc_logic.append('baddark > {0:.2f}'.format(p['QC_MAX_DARK']))
# ----------------------------------------------------------------------
# finally log the failed messages and set QC = 1 if we pass the
# quality control QC = 0 if we fail quality control
if passed:
WLOG(p, 'info', 'QUALITY CONTROL SUCCESSFUL - Well Done -')
p['QC'] = 1
p.set_source('QC', __NAME__ + '/main()')
else:
for farg in fail_msg:
wmsg = 'QUALITY CONTROL FAILED: {0}'
WLOG(p, 'warning', wmsg.format(farg))
p['QC'] = 0
p.set_source('QC', __NAME__ + '/main()')
# store in qc_params
qc_params = [qc_names, qc_values, qc_logic, qc_pass]
# ----------------------------------------------------------------------
# Save dark to file
# ----------------------------------------------------------------------
# get raw dark filename
rawdarkfile = os.path.basename(p['FITSFILENAME'])
# construct folder and filename
darkfits, tag = spirouConfig.Constants.DARK_FILE(p)
darkfitsname = os.path.basename(darkfits)
# log saving dark frame
WLOG(p, '', 'Saving Dark frame in ' + darkfitsname)
# add keys from original header file
hdict = spirouImage.CopyOriginalKeys(hdr)
# define new keys to add
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_DATE'], value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DATE_NOW'], value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_PID'], value=p['PID'])
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag)
hdict = spirouImage.AddKey1DList(p,
hdict,
p['KW_INFILE1'],
dim1name='file',
values=p['ARG_FILE_NAMES'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DARK_DEAD'],
value=p['DADEAD_FULL'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DARK_MED'], value=p['MED_FULL'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DARK_B_DEAD'],
value=p['DADEAD_BLUE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DARK_B_MED'],
value=p['MED_BLUE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DARK_R_DEAD'],
value=p['DADEAD_RED'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DARK_R_MED'],
value=p['MED_RED'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DARK_CUT'],
value=p['DARK_CUTLIMIT'])
# add qc parameters
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_QC'], value=p['QC'])
hdict = spirouImage.AddQCKeys(p, hdict, qc_params)
# Set to zero dark value > dark_cutlimit
cutmask = data0 > p['DARK_CUTLIMIT']
data0c = np.where(cutmask, np.zeros_like(data0), data0)
# write image and add header keys (via hdict)
p = spirouImage.WriteImage(p, darkfits, data0c, hdict)
# ----------------------------------------------------------------------
# Save bad pixel mask
# ----------------------------------------------------------------------
# construct bad pixel file name
badpixelfits, tag = spirouConfig.Constants.DARK_BADPIX_FILE(p)
badpixelfitsname = os.path.split(badpixelfits)[-1]
# log that we are saving bad pixel map in dir
WLOG(p, '', 'Saving Bad Pixel Map in ' + badpixelfitsname)
# add keys from original header file
hdict = spirouImage.CopyOriginalKeys(hdr)
# define new keys to add
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_DATE'], value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DATE_NOW'], value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_PID'], value=p['PID'])
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag)
# add qc parameters
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_QC'], value=p['QC'])
hdict = spirouImage.AddQCKeys(p, hdict, qc_params)
hdict['DACUT'] = (p['DARK_CUTLIMIT'],
'Threshold of dark level retain [ADU/s]')
# write to file
datacutmask = np.array(datacutmask, dtype=float)
p = spirouImage.WriteImage(p,
badpixelfits,
datacutmask,
hdict,
dtype='float64')
# ----------------------------------------------------------------------
# Move to calibDB and update calibDB
# ----------------------------------------------------------------------
if p['QC']:
# set dark key
if p['DPRTYPE'] == 'DARK_DARK':
keydb = 'DARK'
elif p['USE_SKYDARK_CORRECTION']:
keydb = 'SKYDARK'
else:
emsg = 'Error: Currently {0} only supports DARK_DARK and OBJ_DARK'
WLOG(p, 'error', emsg.format(__NAME__))
# copy dark fits file to the calibDB folder
spirouDB.PutCalibFile(p, darkfits)
# update the master calib DB file with new key
spirouDB.UpdateCalibMaster(p, keydb, darkfitsname, hdr)
# # set badpix key
# keydb = 'BADPIX_OLD'
# # copy badpix fits file to calibDB folder
# spirouDB.PutCalibFile(p, badpixelfits)
# # update the master calib DB file with new key
# spirouDB.UpdateCalibMaster(p, keydb, badpixelfitsname, hdr)
# ----------------------------------------------------------------------
# End Message
# ----------------------------------------------------------------------
p = spirouStartup.End(p)
# return a copy of locally defined variables in the memory
return dict(locals())
def main(night_name=None, files=None):
"""
cal_SLIT_spirou.py main function, if night_name and files are None uses
arguments from run time i.e.:
cal_SLIT_spirou.py [night_directory] [files]
:param night_name: string or None, the folder within data raw directory
containing files (also reduced directory) i.e.
/data/raw/20170710 would be "20170710" but
/data/raw/AT5/20180409 would be "AT5/20180409"
:param files: string, list or None, the list of files to use for
arg_file_names and fitsfilename
(if None assumes arg_file_names was set from run time)
:return ll: dictionary, containing all the local variables defined in
main
"""
# ----------------------------------------------------------------------
# Set up
# ----------------------------------------------------------------------
# get parameters from config files/run time args/load paths + calibdb
p = spirouStartup.Begin(recipe=__NAME__)
p = spirouStartup.LoadArguments(p, night_name, files)
p = spirouStartup.InitialFileSetup(p, calibdb=True)
# set the fiber type
p['FIBER'] = 'AB'
p.set_source('FIBER', __NAME__ + '/main()')
# ----------------------------------------------------------------------
# Read image file
# ----------------------------------------------------------------------
# read the image data
p, data, hdr = spirouImage.ReadImageAndCombine(p, framemath='add')
# ----------------------------------------------------------------------
# fix for un-preprocessed files
# ----------------------------------------------------------------------
data = spirouImage.FixNonPreProcess(p, data)
# ----------------------------------------------------------------------
# Get basic image properties
# ----------------------------------------------------------------------
# get sig det value
p = spirouImage.GetSigdet(p, hdr, name='sigdet')
# get exposure time
p = spirouImage.GetExpTime(p, hdr, name='exptime')
# get gain
p = spirouImage.GetGain(p, hdr, name='gain')
# ----------------------------------------------------------------------
# Correction of DARK
# ----------------------------------------------------------------------
p, datac = spirouImage.CorrectForDark(p, data, hdr)
datac = data
# ----------------------------------------------------------------------
# Resize image
# ----------------------------------------------------------------------
# rotate the image and convert from ADU/s to e-
data = spirouImage.ConvertToE(spirouImage.FlipImage(p, datac), p=p)
# convert NaN to zeros
data0 = np.where(~np.isfinite(data), np.zeros_like(data), data)
# resize image
bkwargs = dict(xlow=p['IC_CCDX_LOW'], xhigh=p['IC_CCDX_HIGH'],
ylow=p['IC_CCDY_LOW'], yhigh=p['IC_CCDY_HIGH'],
getshape=False)
data2 = spirouImage.ResizeImage(p, data0, **bkwargs)
# log change in data size
WLOG(p, '', ('Image format changed to '
'{0}x{1}').format(*data2.shape))
# ----------------------------------------------------------------------
# Correct for the BADPIX mask (set all bad pixels to zero)
# ----------------------------------------------------------------------
p, data2 = spirouImage.CorrectForBadPix(p, data2, hdr)
p, badpixmap = spirouImage.CorrectForBadPix(p, data2, hdr, return_map=True)
# ----------------------------------------------------------------------
# Background computation
# ----------------------------------------------------------------------
if p['IC_DO_BKGR_SUBTRACTION']:
# log that we are doing background measurement
WLOG(p, '', 'Doing background measurement on raw frame')
# get the bkgr measurement
bargs = [p, data2, hdr, badpixmap]
# background, xc, yc, minlevel = spirouBACK.MeasureBackgroundFF(*bargs)
p, background = spirouBACK.MeasureBackgroundMap(*bargs)
else:
background = np.zeros_like(data2)
p['BKGRDFILE'] = 'None'
p.set_source('BKGRDFILE', __NAME__ + '.main()')
# apply background correction to data
data2 = data2 - background
# save data to loc
loc = ParamDict()
loc['DATA'] = data2
loc.set_source('DATA', __NAME__ + '/main()')
# ----------------------------------------------------------------------
# Log the number of dead pixels
# ----------------------------------------------------------------------
# get the number of bad pixels
n_bad_pix = np.nansum(data2 <= 0)
n_bad_pix_frac = n_bad_pix * 100 / np.product(data2.shape)
# Log number
wmsg = 'Nb dead pixels = {0} / {1:.2f} %'
WLOG(p, 'info', wmsg.format(int(n_bad_pix), n_bad_pix_frac))
# ------------------------------------------------------------------
# Get localisation coefficients
# ------------------------------------------------------------------
# original there is a loop but it is not used --> removed
p = spirouImage.FiberParams(p, p['FIBER'], merge=True)
# get localisation fit coefficients
p, loc = spirouLOCOR.GetCoeffs(p, hdr, loc)
# ------------------------------------------------------------------
# Calculate shape map
# ------------------------------------------------------------------
loc = spirouImage.GetShapeMap(p, loc)
# ------------------------------------------------------------------
# Plotting
# ------------------------------------------------------------------
if p['DRS_PLOT'] > 0:
# plots setup: start interactive plot
sPlt.start_interactive_session(p)
# plot the shape process for each order
sPlt.slit_shape_angle_plot(p, loc)
# end interactive section
sPlt.end_interactive_session(p)
# ------------------------------------------------------------------
# Writing to file
# ------------------------------------------------------------------
# get the raw tilt file name
raw_shape_file = os.path.basename(p['FITSFILENAME'])
# construct file name and path
shapefits, tag = spirouConfig.Constants.SLIT_XSHAPE_FILE(p)
shapefitsname = os.path.basename(shapefits)
# Log that we are saving tilt file
wmsg = 'Saving shape information in file: {0}'
WLOG(p, '', wmsg.format(shapefitsname))
# Copy keys from fits file
# Copy keys from fits file
hdict = spirouImage.CopyOriginalKeys(hdr)
# add version number
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_DATE'], value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DATE_NOW'], value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag)
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBDARK'], value=p['DARKFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBBAD'], value=p['BADPFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBLOCO'], value=p['LOCOFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBSHAPE'], value=raw_shape_file)
# write tilt file to file
p = spirouImage.WriteImage(p, shapefits, loc['DXMAP'], hdict)
# ----------------------------------------------------------------------
# Quality control
# ----------------------------------------------------------------------
# TODO: Decide on some quality control criteria?
# set passed variable and fail message list
passed, fail_msg = True, []
# finally log the failed messages and set QC = 1 if we pass the
# quality control QC = 0 if we fail quality control
if passed:
WLOG(p, 'info', 'QUALITY CONTROL SUCCESSFUL - Well Done -')
p['QC'] = 1
p.set_source('QC', __NAME__ + '/main()')
else:
for farg in fail_msg:
wmsg = 'QUALITY CONTROL FAILED: {0}'
WLOG(p, 'warning', wmsg.format(farg))
p['QC'] = 0
p.set_source('QC', __NAME__ + '/main()')
# ----------------------------------------------------------------------
# Move to calibDB and update calibDB
# ----------------------------------------------------------------------
if p['QC']:
keydb = 'SHAPE'
# copy shape file to the calibDB folder
spirouDB.PutCalibFile(p, shapefits)
# update the master calib DB file with new key
spirouDB.UpdateCalibMaster(p, keydb, shapefitsname, hdr)
# ----------------------------------------------------------------------
# End Message
# ----------------------------------------------------------------------
p = spirouStartup.End(p)
# return a copy of locally defined variables in the memory
return dict(locals())
def main(night_name=None, hcfile=None, fpfiles=None):
"""
cal_SLIT_spirou.py main function, if night_name and files are None uses
arguments from run time i.e.:
cal_SLIT_spirou.py [night_directory] [files]
:param night_name: string or None, the folder within data raw directory
containing files (also reduced directory) i.e.
/data/raw/20170710 would be "20170710" but
/data/raw/AT5/20180409 would be "AT5/20180409"
:param files: string, list or None, the list of files to use for
arg_file_names and fitsfilename
(if None assumes arg_file_names was set from run time)
:return ll: dictionary, containing all the local variables defined in
main
"""
# ----------------------------------------------------------------------
# Set up
# ----------------------------------------------------------------------
# get parameters from config files/run time args/load paths + calibdb
p = spirouStartup.Begin(recipe=__NAME__)
if hcfile is None or fpfiles is None:
names, types = ['hcfile', 'fpfiles'], [str, str]
customargs = spirouStartup.GetCustomFromRuntime(p, [0, 1],
types,
names,
last_multi=True)
else:
customargs = dict(hcfile=hcfile, fpfiles=fpfiles)
# get parameters from configuration files and run time arguments
p = spirouStartup.LoadArguments(p,
night_name,
customargs=customargs,
mainfitsfile='fpfiles')
# ----------------------------------------------------------------------
# Construct reference filename and get fiber type
# ----------------------------------------------------------------------
p, hcfitsfilename = spirouStartup.SingleFileSetup(p, filename=p['HCFILE'])
p, fpfilenames = spirouStartup.MultiFileSetup(p, files=p['FPFILES'])
# set fiber (it doesn't matter with the 2D image but we need this to get
# the lamp type for FPFILES and HCFILES, AB == C
p['FIBER'] = 'AB'
p['FIB_TYP'] = [p['FIBER']]
fsource = __NAME__ + '/main()'
p.set_sources(['FIBER', 'FIB_TYP'], fsource)
# set the hcfilename to the first hcfilenames
fpfitsfilename = fpfilenames[0]
# ----------------------------------------------------------------------
# Once we have checked the e2dsfile we can load calibDB
# ----------------------------------------------------------------------
# as we have custom arguments need to load the calibration database
p = spirouStartup.LoadCalibDB(p)
# add a force plot off
p['PLOT_PER_ORDER'] = PLOT_PER_ORDER
p.set_source('PLOT_PER_ORDER', __NAME__ + '.main()')
# ----------------------------------------------------------------------
# Read FP and HC files
# ----------------------------------------------------------------------
# read and combine all FP files except the first (fpfitsfilename)
rargs = [p, 'add', fpfitsfilename, fpfilenames[1:]]
p, fpdata, fphdr = spirouImage.ReadImageAndCombine(*rargs)
# read first file (hcfitsfilename)
hcdata, hchdr, _, _ = spirouImage.ReadImage(p, hcfitsfilename)
# add data and hdr to loc
loc = ParamDict()
loc['HCDATA'], loc['HCHDR'] = hcdata, hchdr
loc['FPDATA'], loc['FPHDR'] = fpdata, fphdr
# set the source
sources = ['HCDATA', 'HCHDR']
loc.set_sources(sources, 'spirouImage.ReadImageAndCombine()')
sources = ['FPDATA', 'FPHDR']
loc.set_sources(sources, 'spirouImage.ReadImage()')
# ---------------------------------------------------------------------
# fix for un-preprocessed files
# ----------------------------------------------------------------------
hcdata = spirouImage.FixNonPreProcess(p, hcdata)
fpdata = spirouImage.FixNonPreProcess(p, fpdata)
# ----------------------------------------------------------------------
# Get basic image properties for reference file
# ----------------------------------------------------------------------
# get sig det value
p = spirouImage.GetSigdet(p, fphdr, name='sigdet')
# get exposure time
p = spirouImage.GetExpTime(p, fphdr, name='exptime')
# get gain
p = spirouImage.GetGain(p, fphdr, name='gain')
# get lamp parameters
p = spirouTHORCA.GetLampParams(p, hchdr)
# ----------------------------------------------------------------------
# Correction of DARK
# ----------------------------------------------------------------------
# p, hcdatac = spirouImage.CorrectForDark(p, hcdata, hchdr)
hcdatac = hcdata
p['DARKFILE'] = 'None'
# p, fpdatac = spirouImage.CorrectForDark(p, fpdata, fphdr)
fpdatac = fpdata
# ----------------------------------------------------------------------
# Resize hc data
# ----------------------------------------------------------------------
# rotate the image and convert from ADU/s to e-
hcdata = spirouImage.ConvertToE(spirouImage.FlipImage(p, hcdatac), p=p)
# convert NaN to zeros
hcdata0 = np.where(~np.isfinite(hcdata), np.zeros_like(hcdata), hcdata)
# resize image
bkwargs = dict(xlow=p['IC_CCDX_LOW'],
xhigh=p['IC_CCDX_HIGH'],
ylow=p['IC_CCDY_LOW'],
yhigh=p['IC_CCDY_HIGH'],
getshape=False)
hcdata2 = spirouImage.ResizeImage(p, hcdata0, **bkwargs)
# log change in data size
WLOG(p, '', ('HC Image format changed to '
'{0}x{1}').format(*hcdata2.shape))
# ----------------------------------------------------------------------
# Resize fp data
# ----------------------------------------------------------------------
# rotate the image and convert from ADU/s to e-
fpdata = spirouImage.ConvertToE(spirouImage.FlipImage(p, fpdatac), p=p)
# convert NaN to zeros
fpdata0 = np.where(~np.isfinite(fpdata), np.zeros_like(fpdata), fpdata)
# resize image
bkwargs = dict(xlow=p['IC_CCDX_LOW'],
xhigh=p['IC_CCDX_HIGH'],
ylow=p['IC_CCDY_LOW'],
yhigh=p['IC_CCDY_HIGH'],
getshape=False)
fpdata2 = spirouImage.ResizeImage(p, fpdata0, **bkwargs)
# log change in data size
WLOG(p, '', ('FP Image format changed to '
'{0}x{1}').format(*fpdata2.shape))
# ----------------------------------------------------------------------
# Correct for the BADPIX mask (set all bad pixels to zero)
# ----------------------------------------------------------------------
# p, hcdata2 = spirouImage.CorrectForBadPix(p, hcdata2, hchdr)
# p, fpdata2 = spirouImage.CorrectForBadPix(p, fpdata2, fphdr)
p['BADPFILE'] = 'None'
# save data to loc
loc['HCDATA'] = hcdata2
loc.set_source('HCDATA', __NAME__ + '/main()')
# save data to loc
loc['FPDATA'] = fpdata2
loc.set_source('FPDATA', __NAME__ + '/main()')
# ----------------------------------------------------------------------
# Log the number of dead pixels
# ----------------------------------------------------------------------
# get the number of bad pixels
n_bad_pix = np.nansum(hcdata2 <= 0)
n_bad_pix_frac = n_bad_pix * 100 / np.product(hcdata2.shape)
# Log number
wmsg = 'Nb HC dead pixels = {0} / {1:.2f} %'
WLOG(p, 'info', wmsg.format(int(n_bad_pix), n_bad_pix_frac))
# ----------------------------------------------------------------------
# Log the number of dead pixels
# ----------------------------------------------------------------------
# get the number of bad pixels
n_bad_pix = np.nansum(fpdata2 <= 0)
n_bad_pix_frac = n_bad_pix * 100 / np.product(fpdata2.shape)
# Log number
wmsg = 'Nb FP dead pixels = {0} / {1:.2f} %'
WLOG(p, 'info', wmsg.format(int(n_bad_pix), n_bad_pix_frac))
# ------------------------------------------------------------------
# Get localisation coefficients
# ------------------------------------------------------------------
# original there is a loop but it is not used --> removed
p = spirouImage.FiberParams(p, p['FIBER'], merge=True)
# get localisation fit coefficients
p, loc = spirouLOCOR.GetCoeffs(p, fphdr, loc)
# ------------------------------------------------------------------
# Get master wave solution map
# ------------------------------------------------------------------
# get master wave map
masterwavefile = spirouDB.GetDatabaseMasterWave(p)
# log process
wmsg1 = 'Getting master wavelength grid'
wmsg2 = '\tFile = {0}'.format(os.path.basename(masterwavefile))
WLOG(p, '', [wmsg1, wmsg2])
# Force A and B to AB solution
if p['FIBER'] in ['A', 'B']:
wave_fiber = 'AB'
else:
wave_fiber = p['FIBER']
# read master wave map
wout = spirouImage.GetWaveSolution(p,
filename=masterwavefile,
return_wavemap=True,
quiet=True,
return_header=True,
fiber=wave_fiber)
loc['MASTERWAVEP'], loc['MASTERWAVE'] = wout[:2]
loc['MASTERWAVEHDR'], loc['WSOURCE'] = wout[2:]
# set sources
wsource = ['MASTERWAVEP', 'MASTERWAVE', 'MASTERWAVEHDR']
loc.set_sources(wsource, 'spirouImage.GetWaveSolution()')
# ----------------------------------------------------------------------
# Read UNe solution
# ----------------------------------------------------------------------
wave_u_ne, amp_u_ne = spirouImage.ReadLineList(p)
loc['LL_LINE'], loc['AMPL_LINE'] = wave_u_ne, amp_u_ne
source = __NAME__ + '.main() + spirouImage.ReadLineList()'
loc.set_sources(['LL_LINE', 'AMPL_LINE'], source)
# ----------------------------------------------------------------------
# Read cavity length file
# ----------------------------------------------------------------------
loc['CAVITY_LEN_COEFFS'] = spirouImage.ReadCavityLength(p)
source = __NAME__ + '.main() + spirouImage.ReadCavityLength()'
loc.set_source('CAVITY_LEN_COEFFS', source)
# ------------------------------------------------------------------
# Calculate shape map
# ------------------------------------------------------------------
loc = spirouImage.GetShapeMap(p, loc)
# ------------------------------------------------------------------
# Plotting
# ------------------------------------------------------------------
if p['DRS_PLOT'] > 0:
# plots setup: start interactive plot
sPlt.start_interactive_session(p)
# plot the shape process for one order
sPlt.slit_shape_angle_plot(p, loc)
# end interactive section
sPlt.end_interactive_session(p)
# ----------------------------------------------------------------------
# Quality control
# ----------------------------------------------------------------------
# TODO: Decide on some quality control criteria?
# set passed variable and fail message list
passed, fail_msg = True, []
qc_values, qc_names, qc_logic, qc_pass = [], [], [], []
# finally log the failed messages and set QC = 1 if we pass the
# quality control QC = 0 if we fail quality control
if passed:
WLOG(p, 'info', 'QUALITY CONTROL SUCCESSFUL - Well Done -')
p['QC'] = 1
p.set_source('QC', __NAME__ + '/main()')
else:
for farg in fail_msg:
wmsg = 'QUALITY CONTROL FAILED: {0}'
WLOG(p, 'warning', wmsg.format(farg))
p['QC'] = 0
p.set_source('QC', __NAME__ + '/main()')
# add to qc header lists
qc_values.append('None')
qc_names.append('None')
qc_logic.append('None')
qc_pass.append(1)
# store in qc_params
qc_params = [qc_names, qc_values, qc_logic, qc_pass]
# ------------------------------------------------------------------
# Writing DXMAP to file
# ------------------------------------------------------------------
# get the raw tilt file name
raw_shape_file = os.path.basename(p['FITSFILENAME'])
# construct file name and path
shapefits, tag = spirouConfig.Constants.SLIT_XSHAPE_FILE(p)
shapefitsname = os.path.basename(shapefits)
# Log that we are saving tilt file
wmsg = 'Saving shape information in file: {0}'
WLOG(p, '', wmsg.format(shapefitsname))
# Copy keys from fits file
hdict = spirouImage.CopyOriginalKeys(fphdr)
# add version number
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_DATE'], value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DATE_NOW'], value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_PID'], value=p['PID'])
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag)
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBDARK'], value=p['DARKFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBBAD'], value=p['BADPFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBLOCO'], value=p['LOCOFILE'])
hdict = spirouImage.AddKey1DList(p,
hdict,
p['KW_INFILE1'],
dim1name='hcfile',
values=p['HCFILE'])
hdict = spirouImage.AddKey1DList(p,
hdict,
p['KW_INFILE2'],
dim1name='fpfile',
values=p['FPFILES'])
# add qc parameters
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_QC'], value=p['QC'])
hdict = spirouImage.AddQCKeys(p, hdict, qc_params)
# write tilt file to file
p = spirouImage.WriteImage(p, shapefits, loc['DXMAP'], hdict)
# ------------------------------------------------------------------
# Writing sanity check files
# ------------------------------------------------------------------
if p['SHAPE_DEBUG_OUTPUTS']:
# log
WLOG(p, '', 'Saving debug sanity check files')
# construct file names
input_fp_file, tag1 = spirouConfig.Constants.SLIT_SHAPE_IN_FP_FILE(p)
output_fp_file, tag2 = spirouConfig.Constants.SLIT_SHAPE_OUT_FP_FILE(p)
input_hc_file, tag3 = spirouConfig.Constants.SLIT_SHAPE_IN_HC_FILE(p)
output_hc_file, tag4 = spirouConfig.Constants.SLIT_SHAPE_OUT_HC_FILE(p)
overlap_file, tag5 = spirouConfig.Constants.SLIT_SHAPE_OVERLAP_FILE(p)
# write input fp file
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag1)
p = spirouImage.WriteImage(p, input_fp_file, loc['FPDATA'], hdict)
# write output fp file
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag2)
p = spirouImage.WriteImage(p, output_fp_file, loc['FPDATA2'], hdict)
# write input fp file
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag3)
p = spirouImage.WriteImage(p, input_hc_file, loc['HCDATA'], hdict)
# write output fp file
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag4)
p = spirouImage.WriteImage(p, output_hc_file, loc['HCDATA2'], hdict)
# write overlap file
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag5)
p = spirouImage.WriteImage(p, overlap_file, loc['ORDER_OVERLAP'],
hdict)
# ----------------------------------------------------------------------
# Move to calibDB and update calibDB
# ----------------------------------------------------------------------
if p['QC']:
keydb = 'SHAPE'
# copy shape file to the calibDB folder
spirouDB.PutCalibFile(p, shapefits)
# update the master calib DB file with new key
spirouDB.UpdateCalibMaster(p, keydb, shapefitsname, fphdr)
# ----------------------------------------------------------------------
# End Message
# ----------------------------------------------------------------------
p = spirouStartup.End(p)
# return a copy of locally defined variables in the memory
return dict(locals())
def main(night_name=None, hcfile=None, fpfiles=None):
"""
cal_SLIT_spirou.py main function, if night_name and files are None uses
arguments from run time i.e.:
cal_SLIT_spirou.py [night_directory] [files]
:param night_name: string or None, the folder within data raw directory
containing files (also reduced directory) i.e.
/data/raw/20170710 would be "20170710" but
/data/raw/AT5/20180409 would be "AT5/20180409"
:param files: string, list or None, the list of files to use for
arg_file_names and fitsfilename
(if None assumes arg_file_names was set from run time)
:return ll: dictionary, containing all the local variables defined in
main
"""
# ----------------------------------------------------------------------
# Set up
# ----------------------------------------------------------------------
# get parameters from config files/run time args/load paths + calibdb
p = spirouStartup.Begin(recipe=__NAME__)
if hcfile is None or fpfiles is None:
names, types = ['hcfile', 'fpfiles'], [str, str]
customargs = spirouStartup.GetCustomFromRuntime(p, [0, 1],
types,
names,
last_multi=True)
else:
customargs = dict(hcfile=hcfile, fpfile=fpfiles)
# get parameters from configuration files and run time arguments
p = spirouStartup.LoadArguments(p,
night_name,
customargs=customargs,
mainfitsfile='fpfiles')
# ----------------------------------------------------------------------
# Construct reference filename and get fiber type
# ----------------------------------------------------------------------
p, hcfitsfilename = spirouStartup.SingleFileSetup(p, filename=p['HCFILE'])
p, fpfitsfiles = spirouStartup.MultiFileSetup(p, files=p['FPFILES'])
# set fiber (it doesn't matter with the 2D image but we need this to get
# the lamp type for FPFILES and HCFILES, AB == C
p['FIBER'] = 'AB'
p['FIB_TYP'] = [p['FIBER']]
fsource = __NAME__ + '/main()'
p.set_sources(['FIBER', 'FIB_TYP'], fsource)
# ----------------------------------------------------------------------
# Once we have checked the e2dsfile we can load calibDB
# ----------------------------------------------------------------------
# as we have custom arguments need to load the calibration database
p = spirouStartup.LoadCalibDB(p)
# add a force plot off
p['PLOT_PER_ORDER'] = PLOT_PER_ORDER
p.set_source('PLOT_PER_ORDER', __NAME__ + '.main()')
# ----------------------------------------------------------------------
# Read FP and HC files
# ----------------------------------------------------------------------
# read input fp and hc data
rkwargs = dict(filename=fpfitsfiles[0],
filenames=fpfitsfiles[1:],
framemath='add')
p, fpdata, fphdr = spirouImage.ReadImageAndCombine(p, **rkwargs)
hcdata, hchdr, _, _ = spirouImage.ReadImage(p, hcfitsfilename)
# add data and hdr to loc
loc = ParamDict()
loc['HCDATA'], loc['HCHDR'] = hcdata, hchdr
loc['FPDATA'], loc['FPHDR'] = fpdata, fphdr
# set the source
sources = ['HCDATA', 'HCHDR']
loc.set_sources(sources, 'spirouImage.ReadImage()')
sources = ['FPDATA', 'FPHDR']
loc.set_sources(sources, 'spirouImage.ReadImage()')
# ---------------------------------------------------------------------
# fix for un-preprocessed files
# ----------------------------------------------------------------------
hcdata = spirouImage.FixNonPreProcess(p, hcdata)
fpdata = spirouImage.FixNonPreProcess(p, fpdata)
# ----------------------------------------------------------------------
# Once we have checked the e2dsfile we can load calibDB
# ----------------------------------------------------------------------
# as we have custom arguments need to load the calibration database
p = spirouStartup.LoadCalibDB(p)
# add a force plot off
p['PLOT_PER_ORDER'] = PLOT_PER_ORDER
p.set_source('PLOT_PER_ORDER', __NAME__ + '.main()')
# ----------------------------------------------------------------------
# Get basic image properties for reference file
# ----------------------------------------------------------------------
# get sig det value
p = spirouImage.GetSigdet(p, fphdr, name='sigdet')
# get exposure time
p = spirouImage.GetExpTime(p, fphdr, name='exptime')
# get gain
p = spirouImage.GetGain(p, fphdr, name='gain')
# get lamp parameters
p = spirouTHORCA.GetLampParams(p, hchdr)
# get FP_FP DPRTYPE
p = spirouImage.ReadParam(p, fphdr, 'KW_DPRTYPE', 'DPRTYPE', dtype=str)
# ----------------------------------------------------------------------
# Correction of reference FP
# ----------------------------------------------------------------------
# set the number of frames
p['NBFRAMES'] = len(fpfitsfiles)
p.set_source('NBFRAMES', __NAME__ + '.main()')
# Correction of DARK
p, fpdatac = spirouImage.CorrectForDark(p, fpdata, fphdr)
# Resize hc data
# rotate the image and convert from ADU/s to e-
fpdata = spirouImage.ConvertToE(spirouImage.FlipImage(p, fpdatac), p=p)
# resize image
bkwargs = dict(xlow=p['IC_CCDX_LOW'],
xhigh=p['IC_CCDX_HIGH'],
ylow=p['IC_CCDY_LOW'],
yhigh=p['IC_CCDY_HIGH'],
getshape=False)
fpdata1 = spirouImage.ResizeImage(p, fpdata, **bkwargs)
# log change in data size
WLOG(p, '',
('FPref Image format changed to {0}x{1}').format(*fpdata1.shape))
# Correct for the BADPIX mask (set all bad pixels to zero)
bargs = [p, fpdata1, fphdr]
p, fpdata1 = spirouImage.CorrectForBadPix(*bargs)
p, badpixmask = spirouImage.CorrectForBadPix(*bargs, return_map=True)
# log progress
WLOG(p, '', 'Cleaning FPref hot pixels')
# correct hot pixels
fpdata1 = spirouEXTOR.CleanHotpix(fpdata1, badpixmask)
# add to loc
loc['FPDATA1'] = fpdata1
loc.set_source('FPDATA1', __NAME__ + '.main()')
# Log the number of dead pixels
# get the number of bad pixels
with warnings.catch_warnings(record=True) as _:
n_bad_pix = np.nansum(fpdata1 <= 0)
n_bad_pix_frac = n_bad_pix * 100 / np.product(fpdata1.shape)
# Log number
wmsg = 'Nb FPref dead pixels = {0} / {1:.2f} %'
WLOG(p, 'info', wmsg.format(int(n_bad_pix), n_bad_pix_frac))
# ----------------------------------------------------------------------
# Correction of HC
# ----------------------------------------------------------------------
# set the number of frames
p['NBFRAMES'] = 1
p.set_source('NBFRAMES', __NAME__ + '.main()')
# Correction of DARK
p, hcdatac = spirouImage.CorrectForDark(p, hcdata, hchdr)
# Resize hc data
# rotate the image and convert from ADU/s to e-
hcdata = spirouImage.ConvertToE(spirouImage.FlipImage(p, hcdatac), p=p)
# resize image
bkwargs = dict(xlow=p['IC_CCDX_LOW'],
xhigh=p['IC_CCDX_HIGH'],
ylow=p['IC_CCDY_LOW'],
yhigh=p['IC_CCDY_HIGH'],
getshape=False)
hcdata1 = spirouImage.ResizeImage(p, hcdata, **bkwargs)
# log change in data size
WLOG(p, '', ('HC Image format changed to {0}x{1}').format(*hcdata1.shape))
# Correct for the BADPIX mask (set all bad pixels to zero)
bargs = [p, hcdata1, hchdr]
p, hcdata1 = spirouImage.CorrectForBadPix(*bargs)
p, badpixmask = spirouImage.CorrectForBadPix(*bargs, return_map=True)
# log progress
WLOG(p, '', 'Cleaning HC hot pixels')
# correct hot pixels
hcdata1 = spirouEXTOR.CleanHotpix(hcdata1, badpixmask)
# add to loc
loc['HCDATA1'] = hcdata1
loc.set_source('HCDATA1', __NAME__ + '.main()')
# Log the number of dead pixels
# get the number of bad pixels
with warnings.catch_warnings(record=True) as _:
n_bad_pix = np.nansum(hcdata1 <= 0)
n_bad_pix_frac = n_bad_pix * 100 / np.product(hcdata1.shape)
# Log number
wmsg = 'Nb HC dead pixels = {0} / {1:.2f} %'
WLOG(p, 'info', wmsg.format(int(n_bad_pix), n_bad_pix_frac))
# -------------------------------------------------------------------------
# get all FP_FP files
# -------------------------------------------------------------------------
fpfilenames = spirouImage.FindFiles(p,
filetype=p['DPRTYPE'],
allowedtypes=p['ALLOWED_FP_TYPES'])
# convert filenames to a numpy array
fpfilenames = np.array(fpfilenames)
# julian date to know which file we need to
# process together
fp_time = np.zeros(len(fpfilenames))
basenames, fp_exp, fp_pp_version, nightnames = [], [], [], []
# log progress
WLOG(p, '', 'Reading all fp file headers')
# looping through the file headers
for it in range(len(fpfilenames)):
# log progress
wmsg = '\tReading file {0} / {1}'
WLOG(p, 'info', wmsg.format(it + 1, len(fpfilenames)))
# get fp filename
fpfilename = fpfilenames[it]
# get night name
night_name = os.path.dirname(fpfilenames[it]).split(p['TMP_DIR'])[-1]
# read data
data_it, hdr_it, _, _ = spirouImage.ReadImage(p, fpfilename)
# get header
hdr = spirouImage.ReadHeader(p, filepath=fpfilenames[it])
# add MJDATE to dark times
fp_time[it] = float(hdr[p['KW_ACQTIME'][0]])
# add other keys (for tabular output)
basenames.append(os.path.basename(fpfilenames[it]))
nightnames.append(night_name)
fp_exp.append(float(hdr[p['KW_EXPTIME'][0]]))
fp_pp_version.append(hdr[p['KW_PPVERSION'][0]])
# -------------------------------------------------------------------------
# match files by date
# -------------------------------------------------------------------------
# log progress
wmsg = 'Matching FP files by observation time (+/- {0} hrs)'
WLOG(p, '', wmsg.format(p['DARK_MASTER_MATCH_TIME']))
# get the time threshold
time_thres = p['FP_MASTER_MATCH_TIME']
# get items grouped by time
matched_id = spirouImage.GroupFilesByTime(p, fp_time, time_thres)
# -------------------------------------------------------------------------
# construct the master fp file (+ correct for dark/badpix)
# -------------------------------------------------------------------------
cargs = [fpdata1, fpfilenames, matched_id]
fpcube, transforms = spirouImage.ConstructMasterFP(p, *cargs)
# log process
wmsg1 = 'Master FP construction complete.'
wmsg2 = '\tAdding {0} group images to form FP master image'
WLOG(p, 'info', [wmsg1, wmsg2.format(len(fpcube))])
# sum the cube to make fp data
masterfp = np.sum(fpcube, axis=0)
# add to loc
loc['MASTERFP'] = masterfp
loc.set_source('MASTERFP', __NAME__ + '.main()')
# ------------------------------------------------------------------
# Get localisation coefficients
# ------------------------------------------------------------------
# original there is a loop but it is not used --> removed
p = spirouImage.FiberParams(p, p['FIBER'], merge=True)
# get localisation fit coefficients
p, loc = spirouLOCOR.GetCoeffs(p, fphdr, loc)
# ------------------------------------------------------------------
# Get master wave solution map
# ------------------------------------------------------------------
# get master wave map
masterwavefile = spirouDB.GetDatabaseMasterWave(p)
# log process
wmsg1 = 'Getting master wavelength grid'
wmsg2 = '\tFile = {0}'.format(os.path.basename(masterwavefile))
WLOG(p, '', [wmsg1, wmsg2])
# Force A and B to AB solution
if p['FIBER'] in ['A', 'B']:
wave_fiber = 'AB'
else:
wave_fiber = p['FIBER']
# read master wave map
wout = spirouImage.GetWaveSolution(p,
filename=masterwavefile,
return_wavemap=True,
quiet=True,
return_header=True,
fiber=wave_fiber)
loc['MASTERWAVEP'], loc['MASTERWAVE'] = wout[:2]
loc['MASTERWAVEHDR'], loc['WSOURCE'] = wout[2:]
# set sources
wsource = ['MASTERWAVEP', 'MASTERWAVE', 'MASTERWAVEHDR']
loc.set_sources(wsource, 'spirouImage.GetWaveSolution()')
# ----------------------------------------------------------------------
# Read UNe solution
# ----------------------------------------------------------------------
wave_u_ne, amp_u_ne = spirouImage.ReadLineList(p)
loc['LL_LINE'], loc['AMPL_LINE'] = wave_u_ne, amp_u_ne
source = __NAME__ + '.main() + spirouImage.ReadLineList()'
loc.set_sources(['LL_LINE', 'AMPL_LINE'], source)
# ----------------------------------------------------------------------
# Read cavity length file
# ----------------------------------------------------------------------
loc['CAVITY_LEN_COEFFS'] = spirouImage.ReadCavityLength(p)
source = __NAME__ + '.main() + spirouImage.ReadCavityLength()'
loc.set_source('CAVITY_LEN_COEFFS', source)
# ----------------------------------------------------------------------
# Calculate shape map
# ----------------------------------------------------------------------
# calculate dx map
loc = spirouImage.GetXShapeMap(p, loc)
# if dx map is None we shouldn't continue
if loc['DXMAP'] is None:
fargs = [
loc['MAXDXMAPINFO'][0], loc['MAXDXMAPINFO'][1], loc['MAXDXMAPSTD'],
p['SHAPE_QC_DXMAP_STD']
]
fmsg = ('The std of the dxmap for order {0} y-pixel {1} is too large.'
' std = {2} (limit = {3})'.format(*fargs))
wmsg = 'QUALITY CONTROL FAILED: {0}'
WLOG(p, 'warning', wmsg.format(fmsg))
WLOG(p, 'warning', 'Cannot continue. Exiting.')
# End Message
p = spirouStartup.End(p)
# return a copy of locally defined variables in the memory
return dict(locals())
# calculate dymap
loc = spirouImage.GetYShapeMap(p, loc, fphdr)
# ------------------------------------------------------------------
# Need to straighten the dxmap
# ------------------------------------------------------------------
# copy it first
loc['DXMAP0'] = np.array(loc['DXMAP'])
# straighten it
loc['DXMAP'] = spirouImage.EATransform(loc['DXMAP'], dymap=loc['DYMAP'])
# ------------------------------------------------------------------
# Need to straighten the hc data and fp data for debug
# ------------------------------------------------------------------
# log progress
WLOG(p, '', 'Shape finding complete. Applying transforms.')
# apply very last update of the debananafication
tkwargs = dict(dxmap=loc['DXMAP'], dymap=loc['DYMAP'])
loc['HCDATA2'] = spirouImage.EATransform(loc['HCDATA1'], **tkwargs)
loc['FPDATA2'] = spirouImage.EATransform(loc['FPDATA1'], **tkwargs)
loc.set_sources(['HCDATA2', 'FPDATA2'], __NAME__ + '.main()')
# ------------------------------------------------------------------
# Plotting
# ------------------------------------------------------------------
if p['DRS_PLOT'] > 0:
# plots setup: start interactive plot
sPlt.start_interactive_session(p)
# plot the shape process for one order
sPlt.slit_shape_angle_plot(p, loc)
# end interactive section
sPlt.end_interactive_session(p)
# ----------------------------------------------------------------------
# Quality control
# ----------------------------------------------------------------------
# TODO: Decide on some quality control criteria?
# set passed variable and fail message list
passed, fail_msg = True, []
qc_values, qc_names, qc_logic, qc_pass = [], [], [], []
# finally log the failed messages and set QC = 1 if we pass the
# quality control QC = 0 if we fail quality control
if passed:
WLOG(p, 'info', 'QUALITY CONTROL SUCCESSFUL - Well Done -')
p['QC'] = 1
p.set_source('QC', __NAME__ + '/main()')
else:
for farg in fail_msg:
wmsg = 'QUALITY CONTROL FAILED: {0}'
WLOG(p, 'warning', wmsg.format(farg))
p['QC'] = 0
p.set_source('QC', __NAME__ + '/main()')
# add to qc header lists
qc_values.append(loc['MAXDXMAPSTD'])
qc_names.append('DXMAP STD')
qc_logic.append('DXMAP STD < {0}'.format(p['SHAPE_QC_DXMAP_STD']))
qc_pass.append(1)
# store in qc_params
qc_params = [qc_names, qc_values, qc_logic, qc_pass]
# ------------------------------------------------------------------
# Writing FP big table
# ------------------------------------------------------------------
# construct big fp table
colnames = [
'FILENAME', 'NIGHT', 'MJDATE', 'EXPTIME', 'PVERSION', 'GROUPID',
'DXREF', 'DYREF', 'A', 'B', 'C', 'D'
]
values = [
basenames, nightnames, fp_time, fp_exp, fp_pp_version, matched_id,
transforms[:, 0], transforms[:, 1], transforms[:, 2], transforms[:, 3],
transforms[:, 4], transforms[:, 5]
]
fptable = spirouImage.MakeTable(p, colnames, values)
# ------------------------------------------------------------------
# Writing DXMAP to file
# ------------------------------------------------------------------
# get the raw tilt file name
raw_shape_file = os.path.basename(p['FITSFILENAME'])
# construct file name and path
shapexfits, tag = spirouConfig.Constants.SLIT_XSHAPE_FILE(p)
shapexfitsname = os.path.basename(shapexfits)
# Log that we are saving tilt file
wmsg = 'Saving shape x information in file: {0}'
WLOG(p, '', wmsg.format(shapexfitsname))
# Copy keys from fits file
hdict = spirouImage.CopyOriginalKeys(fphdr)
# add version number
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_DATE'], value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DATE_NOW'], value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_PID'], value=p['PID'])
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag)
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBDARK'], value=p['DARKFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBBAD'], value=p['BADPFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBLOCO'], value=p['LOCOFILE'])
hdict = spirouImage.AddKey1DList(p,
hdict,
p['KW_INFILE1'],
dim1name='hcfile',
values=p['HCFILE'])
hdict = spirouImage.AddKey1DList(p,
hdict,
p['KW_INFILE2'],
dim1name='fpfile',
values=p['FPFILES'])
# add qc parameters
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_QC'], value=p['QC'])
hdict = spirouImage.AddQCKeys(p, hdict, qc_params)
# write tilt file to file
p = spirouImage.WriteImageTable(p,
shapexfits,
image=loc['DXMAP'],
table=fptable,
hdict=hdict)
# ------------------------------------------------------------------
# Writing DYMAP to file
# ------------------------------------------------------------------
# get the raw tilt file name
raw_shape_file = os.path.basename(p['FITSFILENAME'])
# construct file name and path
shapeyfits, tag = spirouConfig.Constants.SLIT_YSHAPE_FILE(p)
shapeyfitsname = os.path.basename(shapeyfits)
# Log that we are saving tilt file
wmsg = 'Saving shape y information in file: {0}'
WLOG(p, '', wmsg.format(shapeyfitsname))
# Copy keys from fits file
hdict = spirouImage.CopyOriginalKeys(fphdr)
# add version number
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_DATE'], value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DATE_NOW'], value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_PID'], value=p['PID'])
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag)
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBDARK'], value=p['DARKFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBBAD'], value=p['BADPFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBLOCO'], value=p['LOCOFILE'])
hdict = spirouImage.AddKey1DList(p,
hdict,
p['KW_INFILE1'],
dim1name='hcfile',
values=p['HCFILE'])
hdict = spirouImage.AddKey1DList(p,
hdict,
p['KW_INFILE2'],
dim1name='fpfile',
values=p['FPFILES'])
# add qc parameters
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_QC'], value=p['QC'])
hdict = spirouImage.AddQCKeys(p, hdict, qc_params)
# write tilt file to file
p = spirouImage.WriteImageTable(p,
shapeyfits,
image=loc['DYMAP'],
table=fptable,
hdict=hdict)
# ------------------------------------------------------------------
# Writing Master FP to file
# ------------------------------------------------------------------
# get the raw tilt file name
raw_shape_file = os.path.basename(p['FITSFILENAME'])
# construct file name and path
fpmasterfits, tag = spirouConfig.Constants.SLIT_MASTER_FP_FILE(p)
fpmasterfitsname = os.path.basename(fpmasterfits)
# Log that we are saving tilt file
wmsg = 'Saving master FP file: {0}'
WLOG(p, '', wmsg.format(fpmasterfitsname))
# Copy keys from fits file
hdict = spirouImage.CopyOriginalKeys(fphdr)
# add version number
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_DATE'], value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DATE_NOW'], value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_PID'], value=p['PID'])
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag)
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBDARK'], value=p['DARKFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBBAD'], value=p['BADPFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBLOCO'], value=p['LOCOFILE'])
hdict = spirouImage.AddKey1DList(p,
hdict,
p['KW_INFILE1'],
dim1name='hcfile',
values=p['HCFILE'])
hdict = spirouImage.AddKey1DList(p,
hdict,
p['KW_INFILE2'],
dim1name='fpfile',
values=p['FPFILES'])
# add qc parameters
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_QC'], value=p['QC'])
hdict = spirouImage.AddQCKeys(p, hdict, qc_params)
# write tilt file to file
p = spirouImage.WriteImageTable(p,
fpmasterfits,
image=masterfp,
table=fptable,
hdict=hdict)
# ------------------------------------------------------------------
# Writing sanity check files
# ------------------------------------------------------------------
if p['SHAPE_DEBUG_OUTPUTS']:
# log
WLOG(p, '', 'Saving debug sanity check files')
# construct file names
input_fp_file, tag1 = spirouConfig.Constants.SLIT_SHAPE_IN_FP_FILE(p)
output_fp_file, tag2 = spirouConfig.Constants.SLIT_SHAPE_OUT_FP_FILE(p)
input_hc_file, tag3 = spirouConfig.Constants.SLIT_SHAPE_IN_HC_FILE(p)
output_hc_file, tag4 = spirouConfig.Constants.SLIT_SHAPE_OUT_HC_FILE(p)
bdxmap_file, tag5 = spirouConfig.Constants.SLIT_SHAPE_BDXMAP_FILE(p)
# write input fp file
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag1)
p = spirouImage.WriteImage(p, input_fp_file, loc['FPDATA1'], hdict)
# write output fp file
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag2)
p = spirouImage.WriteImage(p, output_fp_file, loc['FPDATA2'], hdict)
# write input fp file
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag3)
p = spirouImage.WriteImage(p, input_hc_file, loc['HCDATA1'], hdict)
# write output fp file
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag4)
p = spirouImage.WriteImage(p, output_hc_file, loc['HCDATA2'], hdict)
# write overlap file
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag5)
p = spirouImage.WriteImage(p, bdxmap_file, loc['DXMAP0'], hdict)
# ----------------------------------------------------------------------
# Move to calibDB and update calibDB
# ----------------------------------------------------------------------
if p['QC']:
# add shape x
keydb = 'SHAPEX'
# copy shape file to the calibDB folder
spirouDB.PutCalibFile(p, shapexfits)
# update the master calib DB file with new key
spirouDB.UpdateCalibMaster(p, keydb, shapexfitsname, fphdr)
# add shape y
keydb = 'SHAPEY'
# copy shape file to the calibDB folder
spirouDB.PutCalibFile(p, shapeyfits)
# update the master calib DB file with new key
spirouDB.UpdateCalibMaster(p, keydb, shapeyfitsname, fphdr)
# add fp master
keydb = 'FPMASTER'
# copy shape file to the calibDB folder
spirouDB.PutCalibFile(p, fpmasterfits)
# update the master calib DB file with new key
spirouDB.UpdateCalibMaster(p, keydb, fpmasterfitsname, fphdr)
# ----------------------------------------------------------------------
# End Message
# ----------------------------------------------------------------------
p = spirouStartup.End(p)
# return a copy of locally defined variables in the memory
return dict(locals())
def main(night_name=None, flatfile=None):
# ----------------------------------------------------------------------
# Set up
# ----------------------------------------------------------------------
# get parameters from config files/run time args/load paths + calibdb
p = spirouStartup.Begin(recipe=__NAME__)
# deal with arguments being None (i.e. get from sys.argv)
name, lname = ['flatfile'], ['Reference file']
req, call, call_priority = [True], [flatfile], [True]
# now get custom arguments
customargs = spirouStartup.GetCustomFromRuntime(p, [0], [str], name, req,
call, call_priority, lname)
# get parameters from configuration files and run time arguments
p = spirouStartup.LoadArguments(p,
night_name,
customargs=customargs,
mainfitsfile='flatfile')
# ----------------------------------------------------------------------
# Construct reference filename and get fiber type
# ----------------------------------------------------------------------
p, reffile = spirouStartup.SingleFileSetup(p, filename=p['FLATFILE'])
# ----------------------------------------------------------------------
# Once we have checked the e2dsfile we can load calibDB
# ----------------------------------------------------------------------
# as we have custom arguments need to load the calibration database
p = spirouStartup.LoadCalibDB(p)
# ----------------------------------------------------------------------
# Get the required fiber type from the constants file
# ----------------------------------------------------------------------
# get the fiber type (set to AB)
p['FIBER'] = p['EM_FIB_TYPE']
p['FIBER_TYPES'] = [p['EM_FIB_TYPE']]
# ----------------------------------------------------------------------
# Read flat image file
# ----------------------------------------------------------------------
# read the image data (for the header only)
image, hdr, ny, nx = spirouImage.ReadData(p, reffile)
# ----------------------------------------------------------------------
# fix for un-preprocessed files
# ----------------------------------------------------------------------
image = spirouImage.FixNonPreProcess(p, image)
# ----------------------------------------------------------------------
# Get basic image properties
# ----------------------------------------------------------------------
# create loc
loc = ParamDict()
# get sig det value
p = spirouImage.GetSigdet(p, hdr, name='sigdet')
# get exposure time
p = spirouImage.GetExpTime(p, hdr, name='exptime')
# get gain
p = spirouImage.GetGain(p, hdr, name='gain')
# ----------------------------------------------------------------------
# Resize flat image
# ----------------------------------------------------------------------
# rotate the image and convert from ADU/s to e-
image2 = spirouImage.ConvertToE(spirouImage.FlipImage(p, image), p=p)
# convert NaN to zeros
image2 = np.where(~np.isfinite(image2), np.zeros_like(image2), image2)
# resize image
bkwargs = dict(xlow=p['IC_CCDX_LOW'],
xhigh=p['IC_CCDX_HIGH'],
ylow=p['IC_CCDY_LOW'],
yhigh=p['IC_CCDY_HIGH'],
getshape=False)
image2 = spirouImage.ResizeImage(p, image2, **bkwargs)
# save flat to to loc and set source
loc['IMAGE'] = image2
loc.set_sources(['image'], __NAME__ + '/main()')
# log change in data size
wmsg = 'Image format changed to {0}x{1}'
WLOG(p, '', wmsg.format(*image2.shape))
# ----------------------------------------------------------------------
# Read shape or tilt slit angle
# ----------------------------------------------------------------------
# set source of tilt file
tsource = __NAME__ + '/main() + /spirouImage.ReadTiltFile'
if p['IC_EXTRACT_TYPE'] in EXTRACT_SHAPE_TYPES:
# log progress
WLOG(p, '', 'Debananafying (straightening) image')
# get the shape map
p, loc['SHAPE'] = spirouImage.ReadShapeMap(p, hdr)
loc.set_source('SHAPE', tsource)
else:
# get tilts
p, loc['TILT'] = spirouImage.ReadTiltFile(p, hdr)
loc.set_source('TILT', tsource)
# ----------------------------------------------------------------------
# Read blaze
# ----------------------------------------------------------------------
# get tilts
p, loc['BLAZE'] = spirouImage.ReadBlazeFile(p, hdr)
loc.set_source('BLAZE', __NAME__ + '/main() + /spirouImage.ReadBlazeFile')
# set number of orders from blaze file
loc['NBO'] = loc['BLAZE'].shape[0]
loc.set_source('NBO', __NAME__ + '/main()')
# ------------------------------------------------------------------
# Read wavelength solution
# ------------------------------------------------------------------
# set source of wave file
wsource = __NAME__ + '/main() + /spirouImage.GetWaveSolution'
# Force A and B to AB solution
if p['FIBER'] in ['A', 'B']:
wave_fiber = 'AB'
else:
wave_fiber = p['FIBER']
# get wave image
wout = spirouImage.GetWaveSolution(p,
hdr=hdr,
return_wavemap=True,
return_filename=True,
fiber=wave_fiber)
loc['WAVEPARAMS'], loc['WAVE'], loc['WAVEFILE'], loc['WSOURCE'] = wout
loc.set_sources(['WAVEPARAMS', 'WAVE', 'WAVEFILE', 'WSOURCE'], wsource)
# ------------------------------------------------------------------
# Get localisation coefficients
# ------------------------------------------------------------------
# storage for fiber parameters
loc['ALL_ACC'] = OrderedDict()
loc['ALL_ASS'] = OrderedDict()
# get this fibers parameters
for fiber in p['FIBER_TYPES']:
p = spirouImage.FiberParams(p, fiber, merge=True)
# get localisation fit coefficients
p, loc = spirouLOCOR.GetCoeffs(p, hdr, loc=loc)
# save all fibers
loc['ALL_ACC'][fiber] = loc['ACC']
loc['ALL_ASS'][fiber] = loc['ASS']
# ------------------------------------------------------------------
# Get telluric and telluric mask and add to loc
# ------------------------------------------------------------------
# log process
wmsg = 'Loading telluric model and locating "good" tranmission'
WLOG(p, '', wmsg)
# load telluric and get mask (add to loc)
loc = spirouExM.get_telluric(p, loc)
# ------------------------------------------------------------------
# Make 2D map of orders
# ------------------------------------------------------------------
# log progress
WLOG(p, '', 'Making 2D map of order locations')
# make the 2D wave-image
loc = spirouExM.order_profile(p, loc)
# ------------------------------------------------------------------
# Make 2D map of wavelengths accounting for shape / tilt
# ------------------------------------------------------------------
# log progress
WLOG(p, '', 'Mapping pixels on to wavelength grid')
# make the 2D map of wavelength
loc = spirouExM.create_wavelength_image(p, loc)
# ------------------------------------------------------------------
# Use spectra wavelength to create 2D image from wave-image
# ------------------------------------------------------------------
if p['EM_SAVE_MASK_MAP'] or p['EM_SAVE_TELL_SPEC']:
# log progress
WLOG(p, '', 'Creating image from wave-image interpolation')
# create image from waveimage
wkwargs = dict(x=loc['TELL_X'], y=loc['TELL_Y'])
loc = spirouExM.create_image_from_waveimage(loc, **wkwargs)
else:
loc['SPE'] = np.zeros_like(image2).astype(float)
# ------------------------------------------------------------------
# Create 2D mask (min to max lambda + transmission threshold)
# ------------------------------------------------------------------
if p['EM_SAVE_MASK_MAP']:
# log progress
WLOG(p, '', 'Creating wavelength/tranmission mask')
# create mask
loc = spirouExM.create_mask(p, loc)
else:
loc['TELL_MASK_2D'] = np.zeros_like(image2).astype(bool)
# ----------------------------------------------------------------------
# Quality control
# ----------------------------------------------------------------------
# set passed variable and fail message list
passed, fail_msg = True, []
qc_values, qc_names, qc_logic, qc_pass = [], [], [], []
# TODO: Needs doing
# finally log the failed messages and set QC = 1 if we pass the
# quality control QC = 0 if we fail quality control
if passed:
WLOG(p, 'info', 'QUALITY CONTROL SUCCESSFUL - Well Done -')
p['QC'] = 1
p.set_source('QC', __NAME__ + '/main()')
else:
for farg in fail_msg:
wmsg = 'QUALITY CONTROL FAILED: {0}'
WLOG(p, 'warning', wmsg.format(farg))
p['QC'] = 0
p.set_source('QC', __NAME__ + '/main()')
# add to qc header lists
qc_values.append('None')
qc_names.append('None')
qc_logic.append('None')
qc_pass.append(1)
# store in qc_params
qc_params = [qc_names, qc_values, qc_logic, qc_pass]
# ------------------------------------------------------------------
# Construct parameters for header
# ------------------------------------------------------------------
hdict = OrderedDict()
# set the version
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_DATE'], value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_DATE_NOW'], value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_PID'], value=p['PID'])
# set the input files
if loc['SHAPE'] is not None:
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBSHAPE'],
value=p['SHAPFILE'])
else:
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBTILT'],
value=p['TILTFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBBLAZE'], value=p['BLAZFILE'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBLOCO'], value=p['LOCOFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBWAVE'],
value=loc['WAVEFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_WAVESOURCE'],
value=loc['WSOURCE'])
hdict = spirouImage.AddKey1DList(p,
hdict,
p['KW_INFILE1'],
dim1name='file',
values=p['FLATFILE'])
# add name of the TAPAS y data
hdict = spirouImage.AddKey(p,
hdict,
p['KW_EM_TELLY'],
value=loc['TELLSPE'])
# add name of the localisation fits file used
hfile = os.path.basename(loc['LOCO_CTR_FILE'])
hdict = spirouImage.AddKey(p, hdict, p['kw_EM_LOCFILE'], value=hfile)
# add the max and min wavelength threshold
hdict = spirouImage.AddKey(p,
hdict,
p['kw_EM_MINWAVE'],
value=p['EM_MIN_LAMBDA'])
hdict = spirouImage.AddKey(p,
hdict,
p['kw_EM_MAXWAVE'],
value=p['EM_MAX_LAMBDA'])
# add qc parameters
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_QC'], value=p['QC'])
hdict = spirouImage.AddQCKeys(p, hdict, qc_params)
# add the transmission cut
hdict = spirouImage.AddKey(p,
hdict,
p['kw_EM_TRASCUT'],
value=p['EM_TELL_THRESHOLD'])
# ------------------------------------------------------------------
# Deal with output preferences
# ------------------------------------------------------------------
# add bad pixel map (if required)
if p['EM_COMBINED_BADPIX']:
# get bad pix mask (True where bad)
badpixmask, bhdr, badfile = spirouImage.GetBadPixMap(p, hdr)
goodpixels = badpixmask == 0
# apply mask (multiply)
loc['TELL_MASK_2D'] = loc['TELL_MASK_2D'] & goodpixels.astype(bool)
else:
badfile = 'None'
# add to hdict
hdict = spirouImage.AddKey(p, hdict, p['KW_CDBBAD'], value=badfile)
# convert waveimage mask into float array
loc['TELL_MASK_2D'] = loc['TELL_MASK_2D'].astype('float')
# check EM_OUTPUT_TYPE and deal with set to "all"
if p['EM_OUTPUT_TYPE'] not in ["drs", "raw", "preprocess", "all"]:
emsg1 = '"EM_OUTPUT_TYPE" not understood'
emsg2 = ' must be either "drs", "raw" or "preprocess"'
emsg3 = ' currently EM_OUTPUT_TYPE="{0}"'.format(p['EM_OUTPUT_TYPE'])
WLOG(p, 'error', [emsg1, emsg2, emsg3])
outputs = []
elif p['EM_OUTPUT_TYPE'] != 'all':
outputs = [str(p['EM_OUTPUT_TYPE'])]
else:
outputs = ["drs", "raw", "preprocess"]
# ----------------------------------------------------------------------
# loop around output types
# ----------------------------------------------------------------------
for output in outputs:
# log progress
WLOG(p, '', 'Processing {0} outputs'.format(output))
# change EM_OUTPUT_TYPE
p['EM_OUTPUT_TYPE'] = output
# copy arrays
out_spe = np.array(loc['SPE'])
out_wave = np.array(loc['WAVEIMAGE'])
out_mask = np.array(loc['TELL_MASK_2D'])
# change image size if needed
if output in ["raw", "preprocess"]:
kk = dict(xsize=image.shape[1], ysize=image.shape[0])
if p['EM_SAVE_TELL_SPEC']:
WLOG(p, '', 'Resizing/Flipping SPE')
out_spe = spirouExM.unresize(p, out_spe, **kk)
WLOG(p, '', 'Rescaling SPE')
out_spe = out_spe / (p['GAIN'] * p['EXPTIME'])
if p['EM_SAVE_WAVE_MAP']:
WLOG(p, '', 'Resizing/Flipping WAVEIMAGE')
out_wave = spirouExM.unresize(p, out_wave, **kk)
if p['EM_SAVE_MASK_MAP']:
WLOG(p, '', 'Resizing/Flipping TELL_MASK_2D')
out_mask = spirouExM.unresize(p, out_mask, **kk)
# if raw need to rotate (undo pre-processing)
if output == "raw":
if p['EM_SAVE_TELL_SPEC']:
WLOG(p, '', 'Rotating SPE')
out_spe = np.rot90(out_spe, 1)
if p['EM_SAVE_WAVE_MAP']:
WLOG(p, '', 'Rotating WAVEIMAGE')
out_wave = np.rot90(out_wave, 1)
if p['EM_SAVE_MASK_MAP']:
WLOG(p, '', 'Rotating TELL_MASK_2D')
out_mask = np.rot90(out_mask, 1)
# ----------------------------------------------------------------------
# save 2D spectrum, wavelength image and mask to file
# ----------------------------------------------------------------------
# save telluric spectrum
if p['EM_SAVE_TELL_SPEC']:
# construct spectrum filename
specfitsfile, tag = spirouConfig.Constants.EM_SPE_FILE(p)
specfilename = os.path.split(specfitsfile)[-1]
# set the version
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DRS_DATE'],
value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DATE_NOW'],
value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag)
# log progress
wmsg = 'Writing spectrum to file {0}'
WLOG(p, '', wmsg.format(specfilename))
# write to file
p = spirouImage.WriteImage(p, specfitsfile, out_spe, hdict=hdict)
# ----------------------------------------------------------------------
# save wave map
if p['EM_SAVE_WAVE_MAP']:
# construct waveimage filename
wavefitsfile, tag = spirouConfig.Constants.EM_WAVE_FILE(p)
wavefilename = os.path.split(wavefitsfile)[-1]
# set the version
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DRS_DATE'],
value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DATE_NOW'],
value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag)
# log progress
wmsg = 'Writing wave image to file {0}'
WLOG(p, '', wmsg.format(wavefilename))
# write to file
p = spirouImage.WriteImage(p, wavefitsfile, out_wave, hdict=hdict)
# ----------------------------------------------------------------------
# save mask file
if p['EM_SAVE_MASK_MAP']:
# construct tell mask 2D filename
maskfitsfile, tag = spirouConfig.Constants.EM_MASK_FILE(p)
maskfilename = os.path.split(maskfitsfile)[-1]
# set the version
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DRS_DATE'],
value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DATE_NOW'],
value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag)
# log progress
wmsg = 'Writing telluric mask to file {0}'
WLOG(p, '', wmsg.format(maskfilename))
# convert boolean mask to integers
writablemask = np.array(out_mask, dtype=float)
# write to file
p = spirouImage.WriteImage(p,
maskfitsfile,
writablemask,
hdict=hdict)
# ----------------------------------------------------------------------
# End Message
# ----------------------------------------------------------------------
p = spirouStartup.End(p)
# return a copy of locally defined variables in the memory
return dict(locals())
def main(night_name=None, files=None):
"""
cal_FF_RAW_spirou.py main function, if night_name and files are None uses
arguments from run time i.e.:
cal_FF_RAW_spirou.py [night_directory] [files]
:param night_name: string or None, the folder within data raw directory
containing files (also reduced directory) i.e.
/data/raw/20170710 would be "20170710" but
/data/raw/AT5/20180409 would be "AT5/20180409"
:param files: string, list or None, the list of files to use for
arg_file_names and fitsfilename
(if None assumes arg_file_names was set from run time)
:return ll: dictionary, containing all the local variables defined in
main
"""
# ----------------------------------------------------------------------
# Set up
# ----------------------------------------------------------------------
# get parameters from config files/run time args/load paths + calibdb
p = spirouStartup.Begin(recipe=__NAME__)
p = spirouStartup.LoadArguments(p, night_name, files)
p = spirouStartup.InitialFileSetup(p, calibdb=True)
# run specific start up
p['FIB_TYPE'] = p['FIBER_TYPES']
p.set_source('FIB_TYPE', __NAME__ + '__main__()')
# ----------------------------------------------------------------------
# Read image file
# ----------------------------------------------------------------------
# read the image data
p, data, hdr = spirouImage.ReadImageAndCombine(p, framemath='add')
# ----------------------------------------------------------------------
# fix for un-preprocessed files
# ----------------------------------------------------------------------
data = spirouImage.FixNonPreProcess(p, data)
# ----------------------------------------------------------------------
# Get basic image properties
# ----------------------------------------------------------------------
# get sig det value
p = spirouImage.GetSigdet(p, hdr, name='sigdet')
# get exposure time
p = spirouImage.GetExpTime(p, hdr, name='exptime')
# get gain
p = spirouImage.GetGain(p, hdr, name='gain')
# set sigdet and conad keywords (sigdet is changed later)
p['KW_CCD_SIGDET'][1] = p['SIGDET']
p['KW_CCD_CONAD'][1] = p['GAIN']
# ----------------------------------------------------------------------
# Correction of DARK
# ----------------------------------------------------------------------
p, datac = spirouImage.CorrectForDark(p, data, hdr)
# ----------------------------------------------------------------------
# Resize image
# ----------------------------------------------------------------------
# rotate the image and convert from ADU/s to e-
data = spirouImage.ConvertToADU(spirouImage.FlipImage(p, datac), p=p)
# convert NaN to zeros
data0 = np.where(~np.isfinite(data), np.zeros_like(data), data)
# resize image
bkwargs = dict(xlow=p['IC_CCDX_LOW'],
xhigh=p['IC_CCDX_HIGH'],
ylow=p['IC_CCDY_LOW'],
yhigh=p['IC_CCDY_HIGH'],
getshape=False)
data1 = spirouImage.ResizeImage(p, data0, **bkwargs)
# log change in data size
WLOG(p, '', ('Image format changed to '
'{0}x{1}').format(*data1.shape[::-1]))
# ----------------------------------------------------------------------
# Correct for the BADPIX mask (set all bad pixels to zero)
# ----------------------------------------------------------------------
p, data1 = spirouImage.CorrectForBadPix(p, data1, hdr)
# ----------------------------------------------------------------------
# Log the number of dead pixels
# ----------------------------------------------------------------------
# get the number of bad pixels
n_bad_pix = np.sum(~np.isfinite(data1))
n_bad_pix_frac = n_bad_pix * 100 / np.product(data1.shape)
# Log number
wmsg = 'Nb dead pixels = {0} / {1:.4f} %'
WLOG(p, 'info', wmsg.format(int(n_bad_pix), n_bad_pix_frac))
# ----------------------------------------------------------------------
# Get the miny, maxy and max_signal for the central column
# ----------------------------------------------------------------------
# get the central column
y = data1[p['IC_CENT_COL'], :]
# get the min max and max signal using box smoothed approach
miny, maxy, max_signal, diff_maxmin = spirouBACK.MeasureMinMaxSignal(p, y)
# Log max average flux/pixel
wmsg = ('Maximum average flux (95th percentile) /pixel in the spectrum: '
'{0:.1f} [ADU]')
WLOG(p, 'info', wmsg.format(max_signal / p['NBFRAMES']))
# ----------------------------------------------------------------------
# Background computation
# ----------------------------------------------------------------------
# p['ic_bkgr_percent'] = 3.0
if p['IC_DO_BKGR_SUBTRACTION']:
# log that we are doing background measurement
WLOG(p, '', 'Doing background measurement on raw frame')
# get the bkgr measurement
bargs = [p, data1, hdr]
# background, xc, yc, minlevel = spirouBACK.MeasureBackgroundFF(*bargs)
p, background = spirouBACK.MeasureBackgroundMap(*bargs)
else:
background = np.zeros_like(data1)
p['BKGRDFILE'] = 'None'
p.set_source('BKGRDFILE', __NAME__ + '.main()')
# apply background correction to data
data1 = data1 - background
# ----------------------------------------------------------------------
# Read tilt slit angle
# ----------------------------------------------------------------------
# define loc storage parameter dictionary
loc = ParamDict()
# get tilts
if p['IC_FF_EXTRACT_TYPE'] not in EXTRACT_SHAPE_TYPES:
p, loc['TILT'] = spirouImage.ReadTiltFile(p, hdr)
else:
loc['TILT'] = None
loc.set_source('TILT', __NAME__ + '/main()')
# ----------------------------------------------------------------------
# Get all fiber data (for all fibers)
# ----------------------------------------------------------------------
# TODO: This is temp solution for options 5a and 5b
loc_fibers = spirouLOCOR.GetFiberData(p, hdr)
# ------------------------------------------------------------------
# Deal with debananafication
# ------------------------------------------------------------------
# if mode 4a or 4b we need to straighten in x only
if p['IC_FF_EXTRACT_TYPE'] in ['4a', '4b']:
# get the shape parameters
p, shapem_x = spirouImage.GetShapeX(p, hdr)
p, shape_local = spirouImage.GetShapeLocal(p, hdr)
# log progress
WLOG(p, '', 'Debananafying (straightening) image')
# apply shape transforms
targs = dict(lin_transform_vect=shape_local, dxmap=shapem_x)
data2 = spirouImage.EATransform(data1, **targs)
# if mode 5a or 5b we need to straighten in x and y using the
# polynomial fits for location
elif p['IC_FF_EXTRACT_TYPE'] in ['5a', '5b']:
# get the shape parameters
p, shapem_x = spirouImage.GetShapeX(p, hdr)
p, shapem_y = spirouImage.GetShapeY(p, hdr)
p, shape_local = spirouImage.GetShapeLocal(p, hdr)
p, fpmaster = spirouImage.GetFPMaster(p, hdr)
# get the bad pixel map
bkwargs = dict(return_map=True, quiet=True)
p, badpix = spirouImage.CorrectForBadPix(p, data1, hdr, **bkwargs)
# log progress
WLOG(p, '', 'Cleaning image')
# clean the image
data1 = spirouEXTOR.CleanHotpix(data1, badpix)
# log progress
WLOG(p, '', 'Debananafying (straightening) image')
# apply shape transforms
targs = dict(lin_transform_vect=shape_local,
dxmap=shapem_x,
dymap=shapem_y)
data2 = spirouImage.EATransform(data1, **targs)
# in any other mode we do not straighten
else:
data2 = np.array(data1)
# ----------------------------------------------------------------------
# Fiber loop
# ----------------------------------------------------------------------
# loop around fiber types
for fiber in p['FIB_TYPE']:
# set fiber in p
p['FIBER'] = fiber
p.set_source('FIBER', __NAME__ + '/main()')
# get fiber parameters
params2add = spirouImage.FiberParams(p, p['FIBER'])
for param in params2add:
p[param] = params2add[param]
p.set_source(param, __NAME__ + '.main()')
# ------------------------------------------------------------------
# Get fiber specific parameters from loc_fibers
# ------------------------------------------------------------------
# get this fibers parameters
p = spirouImage.FiberParams(p, p['FIBER'], merge=True)
# get localisation parameters
for key in loc_fibers[fiber]:
loc[key] = loc_fibers[fiber][key]
loc.set_source(key, loc_fibers[fiber].sources[key])
# get locofile source
p['LOCOFILE'] = loc['LOCOFILE']
p.set_source('LOCOFILE', loc.sources['LOCOFILE'])
# get the order_profile
order_profile = loc_fibers[fiber]['ORDER_PROFILE']
# ------------------------------------------------------------------
# Set up Extract storage
# ------------------------------------------------------------------
# Create array to store extraction (for each order and each pixel
# along order)
loc['E2DS'] = np.zeros((loc['NUMBER_ORDERS'], data2.shape[1]))
loc['E2DSLL'] = []
# Create array to store the blaze (for each order and at each pixel
# along order)
loc['BLAZE'] = np.zeros((loc['NUMBER_ORDERS'], data2.shape[1]))
# Create array to store the flat (for each order and at each pixel
# along order)
loc['FLAT'] = np.zeros((loc['NUMBER_ORDERS'], data2.shape[1]))
# Create array to store the signal to noise ratios for each order
loc['SNR'] = np.zeros(loc['NUMBER_ORDERS'])
# Create array to store the rms for each order
loc['RMS'] = np.zeros(loc['NUMBER_ORDERS'])
# Manually set the sigdet to be used in extraction weighting
if p['IC_FF_SIGDET'] > 0:
p['SIGDET'] = float(p['IC_FF_SIGDET'])
# ------------------------------------------------------------------
# Extract orders
# old code time: 1 loop, best of 3: 22.3 s per loop
# new code time: 3.16 s ± 237 ms per loop
# ------------------------------------------------------------------
# get limits of order extraction
valid_orders = spirouFLAT.GetValidOrders(p, loc)
# loop around each order
for order_num in valid_orders:
# extract this order
eargs = [p, loc, data2, order_num]
ekwargs = dict(mode=p['IC_FF_EXTRACT_TYPE'],
order_profile=order_profile)
with warnings.catch_warnings(record=True) as w:
eout = spirouEXTOR.Extraction(*eargs, **ekwargs)
# deal with different return
if p['IC_FF_EXTRACT_TYPE'] in EXTRACT_LL_TYPES:
e2ds, e2dsll, cpt = eout
else:
e2ds, cpt = eout
e2dsll = None
# calculate the noise
range1, range2 = p['IC_EXT_RANGE1'], p['IC_EXT_RANGE2']
noise = p['SIGDET'] * np.sqrt(range1 + range2)
# get window size
blaze_win1 = int(data2.shape[1] / 2) - p['IC_EXTFBLAZ']
blaze_win2 = int(data2.shape[1] / 2) + p['IC_EXTFBLAZ']
# get average flux per pixel
flux = np.nansum(
e2ds[blaze_win1:blaze_win2]) / (2 * p['IC_EXTFBLAZ'])
# calculate signal to noise ratio = flux/sqrt(flux + noise^2)
snr = flux / np.sqrt(flux + noise**2)
# remove edge of orders at low S/N
with warnings.catch_warnings(record=True) as _:
blazemask = e2ds < (flux / p['IC_FRACMINBLAZE'])
e2ds = np.where(blazemask, np.nan, e2ds)
# e2ds = np.where(e2ds < p['IC_MINBLAZE'], 0., e2ds)
# calcualte the blaze function
blaze = spirouFLAT.MeasureBlazeForOrder(p, e2ds)
# calculate the flat
flat = e2ds / blaze
# calculate the rms
rms = np.nanstd(flat)
# log the SNR RMS
wmsg = 'On fiber {0} order {1}: S/N= {2:.1f} - FF rms={3:.2f} %'
wargs = [fiber, order_num, snr, rms * 100.0]
WLOG(p, '', wmsg.format(*wargs))
# add calculations to storage
loc['E2DS'][order_num] = e2ds
loc['SNR'][order_num] = snr
loc['RMS'][order_num] = rms
loc['BLAZE'][order_num] = blaze
loc['FLAT'][order_num] = flat
# save the longfile
if p['IC_FF_EXTRACT_TYPE'] in EXTRACT_LL_TYPES:
loc['E2DSLL'].append(e2dsll)
# set sources
source = __NAME__ + '/main()()'
loc.set_sources(['e2ds', 'SNR', 'RMS', 'blaze', 'flat'], source)
# Log if saturation level reached
satvalue = (flux / p['GAIN']) / (range1 + range2)
if satvalue > (p['QC_LOC_FLUMAX'] * p['NBFRAMES']):
wmsg = 'SATURATION LEVEL REACHED on Fiber {0} order={1}'
WLOG(p, 'warning', wmsg.format(fiber, order_num))
# ----------------------------------------------------------------------
# Plots
# ----------------------------------------------------------------------
if p['DRS_PLOT'] > 0:
# start interactive session if needed
sPlt.start_interactive_session(p)
# plot all orders or one order
if p['IC_FF_PLOT_ALL_ORDERS']:
# plot image with all order fits (slower)
sPlt.ff_aorder_fit_edges(p, loc, data1)
else:
# plot image with selected order fit and edge fit (faster)
sPlt.ff_sorder_fit_edges(p, loc, data1)
# plot tilt adjusted e2ds and blaze for selected order
sPlt.ff_sorder_tiltadj_e2ds_blaze(p, loc)
# plot flat for selected order
sPlt.ff_sorder_flat(p, loc)
# plot the RMS for all but skipped orders
# sPlt.ff_rms_plot(p, loc)
if p['IC_FF_EXTRACT_TYPE'] in EXTRACT_SHAPE_TYPES:
sPlt.ff_debanana_plot(p, loc, data2)
# ------------------------------------------------------------------
# Quality control
# ------------------------------------------------------------------
passed, fail_msg = True, []
qc_values, qc_names, qc_logic, qc_pass = [], [], [], []
# saturation check: check that the max_signal is lower than
# qc_max_signal
# if max_signal > (p['QC_MAX_SIGNAL'] * p['nbframes']):
# fmsg = 'Too much flux in the image (max authorized={0})'
# fail_msg.append(fmsg.format(p['QC_MAX_SIGNAL'] * p['nbframes']))
# passed = False
# # For some reason this test is ignored in old code
# passed = True
# WLOG(p, 'info', fail_msg[-1])
# get mask for removing certain orders in the RMS calculation
remove_orders = np.array(p['FF_RMS_PLOT_SKIP_ORDERS'])
mask = np.in1d(np.arange(len(loc['RMS'])), remove_orders)
# apply mask and calculate the maximum RMS
max_rms = np.nanmax(loc['RMS'][~mask])
# apply the quality control based on the new RMS
if max_rms > p['QC_FF_RMS']:
fmsg = 'abnormal RMS of FF ({0:.3f} > {1:.3f})'
fail_msg.append(fmsg.format(max_rms, p['QC_FF_RMS']))
passed = False
qc_pass.append(0)
else:
qc_pass.append(1)
# add to qc header lists
qc_values.append(max_rms)
qc_names.append('max_rms')
qc_logic.append('max_rms > {0:.3f}'.format(p['QC_FF_RMS']))
# finally log the failed messages and set QC = 1 if we pass the
# quality control QC = 0 if we fail quality control
if passed:
wmsg = 'QUALITY CONTROL SUCCESSFUL - Well Done -'
WLOG(p, 'info', wmsg)
p['QC'] = 1
p.set_source('QC', __NAME__ + '/main()')
else:
for farg in fail_msg:
wmsg = 'QUALITY CONTROL FAILED: {0}'
WLOG(p, 'warning', wmsg.format(farg))
p['QC'] = 0
p.set_source('QC', __NAME__ + '/main()')
# store in qc_params
qc_params = [qc_names, qc_values, qc_logic, qc_pass]
# ----------------------------------------------------------------------
# Store Blaze in file
# ----------------------------------------------------------------------
# get raw flat filename
raw_flat_file = os.path.basename(p['FITSFILENAME'])
e2dsllfits, tag4 = spirouConfig.Constants.EXTRACT_E2DSLL_FILE(p)
# get extraction method and function
efout = spirouEXTOR.GetExtMethod(p, p['IC_FF_EXTRACT_TYPE'])
extmethod, extfunc = efout
# construct filename
blazefits, tag1 = spirouConfig.Constants.FF_BLAZE_FILE(p)
blazefitsname = os.path.split(blazefits)[-1]
# log that we are saving blaze file
wmsg = 'Saving blaze spectrum for fiber: {0} in {1}'
WLOG(p, '', wmsg.format(fiber, blazefitsname))
# add keys from original header file
hdict = spirouImage.CopyOriginalKeys(hdr)
# define new keys to add
hdict = spirouImage.AddKey(p, hdict, p['KW_VERSION'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DRS_DATE'],
value=p['DRS_DATE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_DATE_NOW'],
value=p['DATE_NOW'])
hdict = spirouImage.AddKey(p, hdict, p['KW_PID'], value=p['PID'])
hdict = spirouImage.AddKey(p, hdict, p['KW_FIBER'], value=p['FIBER'])
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag1)
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBDARK'],
value=p['DARKFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBBAD'],
value=p['BADPFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBLOCO'],
value=p['LOCOFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBBACK'],
value=p['BKGRDFILE'])
if p['IC_FF_EXTRACT_TYPE'] not in EXTRACT_SHAPE_TYPES:
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBTILT'],
value=p['TILTFILE'])
if p['IC_FF_EXTRACT_TYPE'] in EXTRACT_SHAPE_TYPES:
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBSHAPEX'],
value=p['SHAPEXFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBSHAPEY'],
value=p['SHAPEYFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBSHAPE'],
value=p['SHAPEFILE'])
hdict = spirouImage.AddKey(p,
hdict,
p['KW_CDBFPMASTER'],
value=p['FPMASTERFILE'])
hdict = spirouImage.AddKey1DList(p,
hdict,
p['KW_INFILE1'],
dim1name='file',
values=p['ARG_FILE_NAMES'])
# add some properties back
hdict = spirouImage.AddKey(p, hdict, p['KW_CCD_SIGDET'])
hdict = spirouImage.AddKey(p, hdict, p['KW_CCD_CONAD'])
# add qc parameters
hdict = spirouImage.AddKey(p, hdict, p['KW_DRS_QC'], value=p['QC'])
hdict = spirouImage.AddQCKeys(p, hdict, qc_params)
# copy extraction method and function to header
# (for reproducibility)
hdict = spirouImage.AddKey(p,
hdict,
p['KW_E2DS_EXTM'],
value=extmethod)
hdict = spirouImage.AddKey(p, hdict, p['KW_E2DS_FUNC'], value=extfunc)
# output keys
hdict = spirouImage.AddKey(p,
hdict,
p['KW_EXT_TYPE'],
value=p['DPRTYPE'])
# write 1D list of the SNR
hdict = spirouImage.AddKey1DList(p,
hdict,
p['KW_EXTRA_SN'],
values=loc['SNR'])
# write center fits and add header keys (via hdict)
p = spirouImage.WriteImage(p, blazefits, loc['BLAZE'], hdict)
# ----------------------------------------------------------------------
# Store Flat-field in file
# ----------------------------------------------------------------------
# construct filename
flatfits, tag2 = spirouConfig.Constants.FF_FLAT_FILE(p)
flatfitsname = os.path.split(flatfits)[-1]
# log that we are saving blaze file
wmsg = 'Saving FF spectrum for fiber: {0} in {1}'
WLOG(p, '', wmsg.format(fiber, flatfitsname))
# write 1D list of the RMS (add to hdict from blaze)
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag2)
hdict = spirouImage.AddKey1DList(p,
hdict,
p['KW_FLAT_RMS'],
values=loc['RMS'])
# write center fits and add header keys (via same hdict as blaze)
p = spirouImage.WriteImage(p, flatfits, loc['FLAT'], hdict)
# Save E2DSLL file
hdict = spirouImage.AddKey(p, hdict, p['KW_OUTPUT'], value=tag4)
hdict = spirouImage.AddKey(p,
hdict,
p['KW_EXT_TYPE'],
value=p['DPRTYPE'])
if p['IC_FF_EXTRACT_TYPE'] in EXTRACT_LL_TYPES:
llstack = np.vstack(loc['E2DSLL'])
p = spirouImage.WriteImage(p, e2dsllfits, llstack, hdict)
# ------------------------------------------------------------------
# Update the calibration database
# ------------------------------------------------------------------
if p['QC'] == 1:
# copy flatfits to calibdb
keydb = 'FLAT_' + p['FIBER']
# copy localisation file to the calibDB folder
spirouDB.PutCalibFile(p, flatfits)
# update the master calib DB file with new key
spirouDB.UpdateCalibMaster(p, keydb, flatfitsname, hdr)
# copy blazefits to calibdb
keydb = 'BLAZE_' + p['FIBER']
# copy localisation file to the calibDB folder
spirouDB.PutCalibFile(p, blazefits)
# update the master calib DB file with new key
spirouDB.UpdateCalibMaster(p, keydb, blazefitsname, hdr)
# ----------------------------------------------------------------------
# End Message
# ----------------------------------------------------------------------
p = spirouStartup.End(p)
# return a copy of locally defined variables in the memory
return dict(locals())