def testCombinedReDigiRecoConfig(self):
"""
_testCombinedReDigiRecoConfig_
Verify that a ReDigi workflow that uses a single step one config
installs into WMBS correctly.
"""
defaultArguments = ReDigiWorkloadFactory.getTestArguments()
defaultArguments["CouchURL"] = os.environ["COUCHURL"]
defaultArguments["CouchDBName"] = "redigi_t"
configs = injectReDigiConfigs(self.configDatabase, combinedStepOne = True)
defaultArguments["StepOneConfigCacheID"] = configs[0]
defaultArguments["StepTwoConfigCacheID"] = configs[2]
defaultArguments["StepOneOutputModuleName"] = "RECODEBUGoutput"
factory = ReDigiWorkloadFactory()
testWorkload = factory.factoryWorkloadConstruction("TestWorkload", defaultArguments)
testWMBSHelper = WMBSHelper(testWorkload, "StepOneProc", "SomeBlock", cachepath = self.testInit.testDir)
testWMBSHelper.createTopLevelFileset()
testWMBSHelper._createSubscriptionsInWMBS(testWMBSHelper.topLevelTask, testWMBSHelper.topLevelFileset)
self.verifyDiscardRAW()
return
def testCombinedReDigiRecoConfig(self):
"""
_testCombinedReDigiRecoConfig_
Verify that a ReDigi workflow that uses a single step one config
installs into WMBS correctly.
"""
defaultArguments = ReDigiWorkloadFactory.getTestArguments()
defaultArguments["CouchURL"] = os.environ["COUCHURL"]
defaultArguments["CouchDBName"] = "redigi_t"
configs = injectReDigiConfigs(self.configDatabase, combinedStepOne = True)
defaultArguments["StepOneConfigCacheID"] = configs[0]
defaultArguments["StepTwoConfigCacheID"] = configs[2]
defaultArguments["StepOneOutputModuleName"] = "RECODEBUGoutput"
factory = ReDigiWorkloadFactory()
testWorkload = factory.factoryWorkloadConstruction("TestWorkload", defaultArguments)
testWMBSHelper = WMBSHelper(testWorkload, "StepOneProc", "SomeBlock", cachepath = self.testInit.testDir)
testWMBSHelper.createTopLevelFileset()
testWMBSHelper._createSubscriptionsInWMBS(testWMBSHelper.topLevelTask, testWMBSHelper.topLevelFileset)
self.verifyDiscardRAW()
return
def testChainedReDigi(self):
"""
_testChaninedReDigi_
Verify that a chained ReDigi workflow that discards RAW data can be
created and installed into WMBS correctly. This will only verify the
step one/step two information in WMBS as the step three information is
the same as the dependent workflow.
"""
defaultArguments = ReDigiWorkloadFactory.getTestArguments()
defaultArguments["CouchURL"] = os.environ["COUCHURL"]
defaultArguments["CouchDBName"] = "redigi_t"
configs = injectReDigiConfigs(self.configDatabase)
defaultArguments["StepOneConfigCacheID"] = configs[0]
defaultArguments["StepTwoConfigCacheID"] = configs[1]
defaultArguments["StepThreeConfigCacheID"] = configs[2]
defaultArguments["StepOneOutputModuleName"] = "RAWDEBUGoutput"
defaultArguments["StepTwoOutputModuleName"] = "RECODEBUGoutput"
defaultArguments["MCPileup"] = PILEUP_DATASET
defaultArguments["KeepStepOneOutput"] = False
factory = ReDigiWorkloadFactory()
testWorkload = factory.factoryWorkloadConstruction("TestWorkload", defaultArguments)
# Verify that pileup is configured for both of the cmsRun steps in the
# top level task.
topLevelTask = testWorkload.getTopLevelTask()[0]
cmsRun1Helper = topLevelTask.getStepHelper("cmsRun1")
cmsRun2Helper = topLevelTask.getStepHelper("cmsRun2")
cmsRun1PileupConfig = cmsRun1Helper.getPileup()
cmsRun2PileupConfig = cmsRun2Helper.getPileup()
self.assertTrue(cmsRun1PileupConfig.mc.dataset, "/some/cosmics/dataset")
self.assertTrue(cmsRun2PileupConfig.mc.dataset, "/some/cosmics/dataset")
testWMBSHelper = WMBSHelper(testWorkload, "StepOneProc", "SomeBlock", cachepath = self.testInit.testDir)
testWMBSHelper.createTopLevelFileset()
testWMBSHelper._createSubscriptionsInWMBS(testWMBSHelper.topLevelTask, testWMBSHelper.topLevelFileset)
self.verifyDiscardRAW()
return
def testChainedReDigi(self):
"""
_testChaninedReDigi_
Verify that a chained ReDigi workflow that discards RAW data can be
created and installed into WMBS correctly. This will only verify the
step one/step two information in WMBS as the step three information is
the same as the dependent workflow.
"""
defaultArguments = ReDigiWorkloadFactory.getTestArguments()
defaultArguments["CouchURL"] = os.environ["COUCHURL"]
defaultArguments["CouchDBName"] = "redigi_t"
configs = injectReDigiConfigs(self.configDatabase)
defaultArguments["StepOneConfigCacheID"] = configs[0]
defaultArguments["StepTwoConfigCacheID"] = configs[1]
defaultArguments["StepThreeConfigCacheID"] = configs[2]
defaultArguments["StepOneOutputModuleName"] = "RAWDEBUGoutput"
defaultArguments["StepTwoOutputModuleName"] = "RECODEBUGoutput"
defaultArguments["MCPileup"] = "/mixing/pileup/DATASET"
defaultArguments["KeepStepOneOutput"] = False
factory = ReDigiWorkloadFactory()
testWorkload = factory.factoryWorkloadConstruction("TestWorkload", defaultArguments)
# Verify that pileup is configured for both of the cmsRun steps in the
# top level task.
topLevelTask = testWorkload.getTopLevelTask()[0]
cmsRun1Helper = topLevelTask.getStepHelper("cmsRun1")
cmsRun2Helper = topLevelTask.getStepHelper("cmsRun2")
cmsRun1PileupConfig = cmsRun1Helper.getPileup()
cmsRun2PileupConfig = cmsRun2Helper.getPileup()
self.assertTrue(cmsRun1PileupConfig.mc.dataset, "/some/cosmics/dataset")
self.assertTrue(cmsRun2PileupConfig.mc.dataset, "/some/cosmics/dataset")
testWMBSHelper = WMBSHelper(testWorkload, "StepOneProc", "SomeBlock", cachepath = self.testInit.testDir)
testWMBSHelper.createTopLevelFileset()
testWMBSHelper._createSubscriptionsInWMBS(testWMBSHelper.topLevelTask, testWMBSHelper.topLevelFileset)
self.verifyDiscardRAW()
return
def testSingleStepReDigi(self):
"""
_testSingleStepReDigi_
Verify that a single step ReDigi workflow can be created and installed
correctly into WMBS.
"""
defaultArguments = ReDigiWorkloadFactory.getTestArguments()
defaultArguments["CouchURL"] = os.environ["COUCHURL"]
defaultArguments["CouchDBName"] = "redigi_t"
configs = injectReDigiConfigs(self.configDatabase)
defaultArguments["StepOneConfigCacheID"] = configs[2]
factory = ReDigiWorkloadFactory()
testWorkload = factory.factoryWorkloadConstruction("TestWorkload", defaultArguments)
testWMBSHelper = WMBSHelper(testWorkload, "StepOneProc", "SomeBlock", cachepath = self.testInit.testDir)
testWMBSHelper.createTopLevelFileset()
testWMBSHelper._createSubscriptionsInWMBS(testWMBSHelper.topLevelTask, testWMBSHelper.topLevelFileset)
self.verifyKeepAOD()
return
def testSingleStepReDigi(self):
"""
_testSingleStepReDigi_
Verify that a single step ReDigi workflow can be created and installed
correctly into WMBS.
"""
defaultArguments = ReDigiWorkloadFactory.getTestArguments()
defaultArguments["CouchURL"] = os.environ["COUCHURL"]
defaultArguments["CouchDBName"] = "redigi_t"
configs = injectReDigiConfigs(self.configDatabase)
defaultArguments["StepOneConfigCacheID"] = configs[2]
factory = ReDigiWorkloadFactory()
testWorkload = factory.factoryWorkloadConstruction("TestWorkload", defaultArguments)
testWMBSHelper = WMBSHelper(testWorkload, "StepOneProc", "SomeBlock", cachepath = self.testInit.testDir)
testWMBSHelper.createTopLevelFileset()
testWMBSHelper._createSubscriptionsInWMBS(testWMBSHelper.topLevelTask, testWMBSHelper.topLevelFileset)
self.verifyKeepAOD()
return
def testThreeStepChainedReDigi(self):
"""
_testThreeStepChaninedReDigi_
Verify that a chained ReDigi workflow that discards RAW and RECO data
can be created and installed into WMBS correctly.
"""
defaultArguments = ReDigiWorkloadFactory.getTestArguments()
defaultArguments["CouchURL"] = os.environ["COUCHURL"]
defaultArguments["CouchDBName"] = "redigi_t"
configs = injectReDigiConfigs(self.configDatabase)
defaultArguments["StepOneConfigCacheID"] = configs[0]
defaultArguments["StepTwoConfigCacheID"] = configs[1]
defaultArguments["StepThreeConfigCacheID"] = configs[2]
defaultArguments["KeepStepOneOutput"] = False
defaultArguments["KeepStepTwoOutput"] = False
defaultArguments["StepOneOutputModuleName"] = "RAWDEBUGoutput"
defaultArguments["StepTwoOutputModuleName"] = "RECODEBUGoutput"
factory = ReDigiWorkloadFactory()
testWorkload = factory.factoryWorkloadConstruction("TestWorkload", defaultArguments)
self.assertTrue(len(testWorkload.getTopLevelTask()) == 1,
"Error: Wrong number of top level tasks.")
topLevelTask = testWorkload.getTopLevelTask()[0]
topLevelStep = topLevelTask.steps()
cmsRun2Step = topLevelStep.getStep("cmsRun2").getTypeHelper()
self.assertTrue(len(cmsRun2Step.listOutputModules()) == 2,
"Error: Wrong number of output modules in cmsRun2.")
testWMBSHelper = WMBSHelper(testWorkload, "StepOneProc", "SomeBlock", cachepath = self.testInit.testDir)
testWMBSHelper.createTopLevelFileset()
testWMBSHelper._createSubscriptionsInWMBS(testWMBSHelper.topLevelTask, testWMBSHelper.topLevelFileset)
self.verifyKeepAOD()
return
def testThreeStepChainedReDigi(self):
"""
_testThreeStepChaninedReDigi_
Verify that a chained ReDigi workflow that discards RAW and RECO data
can be created and installed into WMBS correctly.
"""
defaultArguments = ReDigiWorkloadFactory.getTestArguments()
defaultArguments["CouchURL"] = os.environ["COUCHURL"]
defaultArguments["CouchDBName"] = "redigi_t"
configs = injectReDigiConfigs(self.configDatabase)
defaultArguments["StepOneConfigCacheID"] = configs[0]
defaultArguments["StepTwoConfigCacheID"] = configs[1]
defaultArguments["StepThreeConfigCacheID"] = configs[2]
defaultArguments["KeepStepOneOutput"] = False
defaultArguments["KeepStepTwoOutput"] = False
defaultArguments["StepOneOutputModuleName"] = "RAWDEBUGoutput"
defaultArguments["StepTwoOutputModuleName"] = "RECODEBUGoutput"
factory = ReDigiWorkloadFactory()
testWorkload = factory.factoryWorkloadConstruction("TestWorkload", defaultArguments)
self.assertTrue(len(testWorkload.getTopLevelTask()) == 1,
"Error: Wrong number of top level tasks.")
topLevelTask = testWorkload.getTopLevelTask()[0]
topLevelStep = topLevelTask.steps()
cmsRun2Step = topLevelStep.getStep("cmsRun2").getTypeHelper()
self.assertTrue(len(cmsRun2Step.listOutputModules()) == 2,
"Error: Wrong number of output modules in cmsRun2.")
testWMBSHelper = WMBSHelper(testWorkload, "StepOneProc", "SomeBlock", cachepath = self.testInit.testDir)
testWMBSHelper.createTopLevelFileset()
testWMBSHelper._createSubscriptionsInWMBS(testWMBSHelper.topLevelTask, testWMBSHelper.topLevelFileset)
self.verifyKeepAOD()
return
def testDependentReDigi(self):
"""
_testDependentReDigi_
Verfiy that a dependent ReDigi workflow that keeps stages out
RAW data is created and installed into WMBS correctly.
"""
defaultArguments = ReDigiWorkloadFactory.getTestArguments()
defaultArguments["CouchURL"] = os.environ["COUCHURL"]
defaultArguments["CouchDBName"] = "redigi_t"
configs = injectReDigiConfigs(self.configDatabase)
defaultArguments["StepOneConfigCacheID"] = configs[0]
defaultArguments["StepTwoConfigCacheID"] = configs[1]
defaultArguments["StepThreeConfigCacheID"] = configs[2]
defaultArguments["StepOneOutputModuleName"] = "RAWDEBUGoutput"
defaultArguments["StepTwoOutputModuleName"] = "RECODEBUGoutput"
factory = ReDigiWorkloadFactory()
testWorkload = factory.factoryWorkloadConstruction("TestWorkload", defaultArguments)
testWMBSHelper = WMBSHelper(testWorkload, "StepOneProc", "SomeBlock", cachepath = self.testInit.testDir)
testWMBSHelper.createTopLevelFileset()
testWMBSHelper._createSubscriptionsInWMBS(testWMBSHelper.topLevelTask, testWMBSHelper.topLevelFileset)
topLevelFileset = Fileset(name = "TestWorkload-StepOneProc-SomeBlock")
topLevelFileset.loadData()
stepOneUnmergedRAWFileset = Fileset(name = "/TestWorkload/StepOneProc/unmerged-RAWDEBUGoutput")
stepOneUnmergedRAWFileset.loadData()
stepOneMergedRAWFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/merged-Merged")
stepOneMergedRAWFileset.loadData()
stepOneLogArchiveFileset = Fileset(name = "/TestWorkload/StepOneProc/unmerged-logArchive")
stepOneLogArchiveFileset.loadData()
stepOneMergeLogArchiveFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/merged-logArchive")
stepOneMergeLogArchiveFileset.loadData()
stepTwoUnmergedDQMFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/unmerged-DQMoutput")
stepTwoUnmergedDQMFileset.loadData()
stepTwoUnmergedRECOFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/unmerged-RECODEBUGoutput")
stepTwoUnmergedRECOFileset.loadData()
stepTwoMergedDQMFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeDQMoutput/merged-Merged")
stepTwoMergedDQMFileset.loadData()
stepTwoMergedRECOFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/merged-Merged")
stepTwoMergedRECOFileset.loadData()
stepTwoLogArchiveFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/unmerged-logArchive")
stepTwoLogArchiveFileset.loadData()
stepTwoMergeDQMLogArchiveFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeDQMoutput/merged-logArchive")
stepTwoMergeDQMLogArchiveFileset.loadData()
stepTwoMergeRECOLogArchiveFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/merged-logArchive")
stepTwoMergeRECOLogArchiveFileset.loadData()
stepThreeUnmergedAODFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/StepThreeProc/unmerged-aodOutputModule")
stepThreeUnmergedAODFileset.loadData()
stepThreeMergedAODFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/StepThreeProc/StepThreeProcMergeaodOutputModule/merged-Merged")
stepThreeMergedAODFileset.loadData()
stepThreeLogArchiveFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/StepThreeProc/unmerged-logArchive")
stepThreeLogArchiveFileset.loadData()
stepThreeMergeLogArchiveFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/StepThreeProc/StepThreeProcMergeaodOutputModule/merged-logArchive")
stepThreeMergeLogArchiveFileset.loadData()
stepOneWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc")
stepOneWorkflow.load()
self.assertEqual(stepOneWorkflow.wfType, 'reprocessing')
self.assertTrue("logArchive" in stepOneWorkflow.outputMap.keys(),
"Error: Step one missing output module.")
self.assertTrue("RAWDEBUGoutput" in stepOneWorkflow.outputMap.keys(),
"Error: Step one missing output module.")
self.assertEqual(stepOneWorkflow.outputMap["logArchive"][0]["merged_output_fileset"].id, stepOneLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepOneWorkflow.outputMap["logArchive"][0]["output_fileset"].id, stepOneLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepOneWorkflow.outputMap["RAWDEBUGoutput"][0]["merged_output_fileset"].id, stepOneMergedRAWFileset.id,
"Error: RAWDEBUG output fileset is wrong.")
self.assertEqual(stepOneWorkflow.outputMap["RAWDEBUGoutput"][0]["output_fileset"].id, stepOneUnmergedRAWFileset.id,
"Error: RAWDEBUG output fileset is wrong.")
for outputMod in stepOneWorkflow.outputMap.keys():
self.assertTrue(len(stepOneWorkflow.outputMap[outputMod]) == 1,
"Error: more than one destination for output mod.")
stepOneSub = Subscription(workflow = stepOneWorkflow, fileset = topLevelFileset)
stepOneSub.loadData()
self.assertEqual(stepOneSub["type"], "Processing",
"Error: Step one sub has wrong type.")
stepOneCleanupWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcCleanupUnmergedRAWDEBUGoutput")
stepOneCleanupWorkflow.load()
self.assertEqual(len(stepOneCleanupWorkflow.outputMap.keys()), 0,
"Error: Cleanup should have no output.")
stepOneCleanupSub = Subscription(workflow = stepOneCleanupWorkflow, fileset = stepOneUnmergedRAWFileset)
stepOneCleanupSub.loadData()
self.assertEqual(stepOneCleanupSub["type"], "Cleanup",
"Error: Step one sub has wrong type.")
stepOneLogCollectWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/LogCollect")
stepOneLogCollectWorkflow.load()
self.assertEqual(len(stepOneLogCollectWorkflow.outputMap.keys()), 0,
"Error: LogCollect should have no output.")
stepOneLogCollectSub = Subscription(workflow = stepOneLogCollectWorkflow, fileset = stepOneLogArchiveFileset)
stepOneLogCollectSub.loadData()
self.assertEqual(stepOneLogCollectSub["type"], "LogCollect",
"Error: Step one sub has wrong type.")
stepOneMergeWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput")
stepOneMergeWorkflow.load()
self.assertTrue("Merged" in stepOneMergeWorkflow.outputMap.keys(),
"Error: Step one merge missing output module.")
self.assertTrue("logArchive" in stepOneMergeWorkflow.outputMap.keys(),
"Error: Step one merge missing output module.")
self.assertEqual(stepOneMergeWorkflow.outputMap["logArchive"][0]["merged_output_fileset"].id, stepOneMergeLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepOneMergeWorkflow.outputMap["logArchive"][0]["output_fileset"].id, stepOneMergeLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepOneMergeWorkflow.outputMap["Merged"][0]["merged_output_fileset"].id, stepOneMergedRAWFileset.id,
"Error: RAWDEBUG merge output fileset is wrong.")
self.assertEqual(stepOneMergeWorkflow.outputMap["Merged"][0]["output_fileset"].id, stepOneMergedRAWFileset.id,
"Error: RAWDEBUG merge output fileset is wrong.")
for outputMod in stepOneMergeWorkflow.outputMap.keys():
self.assertTrue(len(stepOneMergeWorkflow.outputMap[outputMod]) == 1,
"Error: more than one destination for output mod.")
stepOneMergeSub = Subscription(workflow = stepOneMergeWorkflow, fileset = stepOneUnmergedRAWFileset)
stepOneMergeSub.loadData()
self.assertEqual(stepOneMergeSub["type"], "Merge",
"Error: Step one sub has wrong type.")
stepTwoWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc")
stepTwoWorkflow.load()
self.assertTrue("RECODEBUGoutput" in stepTwoWorkflow.outputMap.keys(),
"Error: Step two missing output module.")
self.assertTrue("DQMoutput" in stepTwoWorkflow.outputMap.keys(),
"Error: Step two missing output module.")
self.assertEqual(stepTwoWorkflow.outputMap["logArchive"][0]["merged_output_fileset"].id, stepTwoLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepTwoWorkflow.outputMap["logArchive"][0]["output_fileset"].id, stepTwoLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepTwoWorkflow.outputMap["RECODEBUGoutput"][0]["merged_output_fileset"].id, stepTwoMergedRECOFileset.id,
"Error: RECODEBUG output fileset is wrong.")
self.assertEqual(stepTwoWorkflow.outputMap["RECODEBUGoutput"][0]["output_fileset"].id, stepTwoUnmergedRECOFileset.id,
"Error: RECODEBUG output fileset is wrong.")
self.assertEqual(stepTwoWorkflow.outputMap["DQMoutput"][0]["merged_output_fileset"].id, stepTwoMergedDQMFileset.id,
"Error: DQM output fileset is wrong.")
self.assertEqual(stepTwoWorkflow.outputMap["DQMoutput"][0]["output_fileset"].id, stepTwoUnmergedDQMFileset.id,
"Error: DQM output fileset is wrong.")
stepTwoSub = Subscription(workflow = stepTwoWorkflow, fileset = stepOneMergedRAWFileset)
stepTwoSub.loadData()
self.assertEqual(stepTwoSub["type"], "Processing",
"Error: Step two sub has wrong type.")
for outputMod in stepTwoWorkflow.outputMap.keys():
self.assertTrue(len(stepTwoWorkflow.outputMap[outputMod]) == 1,
"Error: more than one destination for output mod.")
stepTwoCleanupDQMWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcCleanupUnmergedDQMoutput")
stepTwoCleanupDQMWorkflow.load()
self.assertEqual(len(stepTwoCleanupDQMWorkflow.outputMap.keys()), 0,
"Error: Cleanup shouldn't have any output.")
stepTwoCleanupDQMSub = Subscription(workflow = stepTwoCleanupDQMWorkflow, fileset = stepTwoUnmergedDQMFileset)
stepTwoCleanupDQMSub.loadData()
self.assertEqual(stepTwoCleanupDQMSub["type"], "Cleanup",
"Error: Step two sub has wrong type.")
stepTwoCleanupRECOWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcCleanupUnmergedRECODEBUGoutput")
stepTwoCleanupRECOWorkflow.load()
self.assertEqual(len(stepTwoCleanupRECOWorkflow.outputMap.keys()), 0,
"Error: Cleanup shouldn't have any output.")
stepTwoCleanupRECOSub = Subscription(workflow = stepTwoCleanupRECOWorkflow, fileset = stepTwoUnmergedRECOFileset)
stepTwoCleanupRECOSub.loadData()
self.assertEqual(stepTwoCleanupRECOSub["type"], "Cleanup",
"Error: Step two sub has wrong type.")
stepTwoLogCollectWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcLogCollect")
stepTwoLogCollectWorkflow.load()
self.assertEqual(len(stepTwoLogCollectWorkflow.outputMap.keys()), 0,
"Error: LogCollect shouldn't have any output.")
stepTwoLogCollectSub = Subscription(workflow = stepTwoLogCollectWorkflow, fileset = stepTwoLogArchiveFileset)
stepTwoLogCollectSub.loadData()
self.assertEqual(stepTwoLogCollectSub["type"], "LogCollect",
"Error: Step two sub has wrong type.")
stepTwoMergeRECOWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput")
stepTwoMergeRECOWorkflow.load()
self.assertTrue("Merged" in stepTwoMergeRECOWorkflow.outputMap.keys(),
"Error: Step two merge missing output module.")
self.assertTrue("logArchive" in stepTwoMergeRECOWorkflow.outputMap.keys(),
"Error: Step two merge missing output module.")
self.assertEqual(stepTwoMergeRECOWorkflow.outputMap["logArchive"][0]["merged_output_fileset"].id, stepTwoMergeRECOLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepTwoMergeRECOWorkflow.outputMap["logArchive"][0]["output_fileset"].id, stepTwoMergeRECOLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepTwoMergeRECOWorkflow.outputMap["Merged"][0]["merged_output_fileset"].id, stepTwoMergedRECOFileset.id,
"Error: RECODEBUG merge output fileset is wrong.")
self.assertEqual(stepTwoMergeRECOWorkflow.outputMap["Merged"][0]["output_fileset"].id, stepTwoMergedRECOFileset.id,
"Error: RECODEBUG merge output fileset is wrong.")
stepTwoMergeRECOSub = Subscription(workflow = stepTwoMergeRECOWorkflow, fileset = stepTwoUnmergedRECOFileset)
stepTwoMergeRECOSub.loadData()
self.assertEqual(stepTwoMergeRECOSub["type"], "Merge",
"Error: Step two sub has wrong type.")
for outputMod in stepTwoMergeRECOWorkflow.outputMap.keys():
self.assertTrue(len(stepTwoMergeRECOWorkflow.outputMap[outputMod]) == 1,
"Error: more than one destination for output mod.")
stepTwoMergeDQMWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeDQMoutput")
stepTwoMergeDQMWorkflow.load()
self.assertTrue("Merged" in stepTwoMergeDQMWorkflow.outputMap.keys(),
"Error: Step two merge missing output module.")
self.assertTrue("logArchive" in stepTwoMergeDQMWorkflow.outputMap.keys(),
"Error: Step two merge missing output module.")
self.assertEqual(stepTwoMergeDQMWorkflow.outputMap["logArchive"][0]["merged_output_fileset"].id, stepTwoMergeDQMLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepTwoMergeDQMWorkflow.outputMap["logArchive"][0]["output_fileset"].id, stepTwoMergeDQMLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepTwoMergeDQMWorkflow.outputMap["Merged"][0]["merged_output_fileset"].id, stepTwoMergedDQMFileset.id,
"Error: DQM merge output fileset is wrong.")
self.assertEqual(stepTwoMergeDQMWorkflow.outputMap["Merged"][0]["output_fileset"].id, stepTwoMergedDQMFileset.id,
"Error: DQM merge output fileset is wrong.")
stepTwoMergeDQMSub = Subscription(workflow = stepTwoMergeDQMWorkflow, fileset = stepTwoUnmergedDQMFileset)
stepTwoMergeDQMSub.loadData()
self.assertEqual(stepTwoMergeDQMSub["type"], "Merge",
"Error: Step two sub has wrong type.")
for outputMod in stepTwoMergeDQMWorkflow.outputMap.keys():
self.assertTrue(len(stepTwoMergeDQMWorkflow.outputMap[outputMod]) == 1,
"Error: more than one destination for output mod.")
stepThreeWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/StepThreeProc")
stepThreeWorkflow.load()
self.assertTrue("aodOutputModule" in stepThreeWorkflow.outputMap.keys(),
"Error: Step three missing output module.")
self.assertTrue("logArchive" in stepThreeWorkflow.outputMap.keys(),
"Error: Step three missing output module.")
self.assertEqual(stepThreeWorkflow.outputMap["logArchive"][0]["merged_output_fileset"].id, stepThreeLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepThreeWorkflow.outputMap["logArchive"][0]["output_fileset"].id, stepThreeLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepThreeWorkflow.outputMap["aodOutputModule"][0]["merged_output_fileset"].id, stepThreeMergedAODFileset.id,
"Error: RECODEBUG output fileset is wrong.")
self.assertEqual(stepThreeWorkflow.outputMap["aodOutputModule"][0]["output_fileset"].id, stepThreeUnmergedAODFileset.id,
"Error: RECODEBUG output fileset is wrong.")
stepThreeSub = Subscription(workflow = stepThreeWorkflow, fileset = stepTwoMergedRECOFileset)
stepThreeSub.loadData()
self.assertEqual(stepThreeSub["type"], "Processing",
"Error: Step three sub has wrong type.")
for outputMod in stepThreeWorkflow.outputMap.keys():
self.assertTrue(len(stepThreeWorkflow.outputMap[outputMod]) == 1,
"Error: more than one destination for output mod.")
stepThreeCleanupWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/StepThreeProc/StepThreeProcCleanupUnmergedaodOutputModule")
stepThreeCleanupWorkflow.load()
self.assertEqual(len(stepThreeCleanupWorkflow.outputMap.keys()), 0,
"Error: Cleanup should have no output.")
stepThreeCleanupSub = Subscription(workflow = stepThreeCleanupWorkflow, fileset = stepThreeUnmergedAODFileset)
stepThreeCleanupSub.loadData()
self.assertEqual(stepThreeCleanupSub["type"], "Cleanup",
"Error: Step three sub has wrong type.")
stepThreeLogCollectWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/StepThreeProc/StepThreeProcLogCollect")
stepThreeLogCollectWorkflow.load()
self.assertEqual(len(stepThreeLogCollectWorkflow.outputMap.keys()), 0,
"Error: LogCollect should have no output.")
stepThreeLogCollectSub = Subscription(workflow = stepThreeLogCollectWorkflow, fileset = stepThreeLogArchiveFileset)
stepThreeLogCollectSub.loadData()
self.assertEqual(stepThreeLogCollectSub["type"], "LogCollect",
"Error: Step three sub has wrong type.")
stepThreeMergeWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/StepThreeProc/StepThreeProcMergeaodOutputModule")
stepThreeMergeWorkflow.load()
self.assertTrue("Merged" in stepThreeMergeWorkflow.outputMap.keys(),
"Error: Step three merge missing output module.")
self.assertTrue("logArchive" in stepThreeMergeWorkflow.outputMap.keys(),
"Error: Step three merge missing output module.")
self.assertEqual(stepThreeMergeWorkflow.outputMap["logArchive"][0]["merged_output_fileset"].id, stepThreeMergeLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepThreeMergeWorkflow.outputMap["logArchive"][0]["output_fileset"].id, stepThreeMergeLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepThreeMergeWorkflow.outputMap["Merged"][0]["merged_output_fileset"].id, stepThreeMergedAODFileset.id,
"Error: AOD merge output fileset is wrong.")
self.assertEqual(stepThreeMergeWorkflow.outputMap["Merged"][0]["output_fileset"].id, stepThreeMergedAODFileset.id,
"Error: AOD merge output fileset is wrong.")
stepThreeMergeSub = Subscription(workflow = stepThreeMergeWorkflow, fileset = stepThreeUnmergedAODFileset)
stepThreeMergeSub.loadData()
self.assertEqual(stepThreeMergeSub["type"], "Merge",
"Error: Step three sub has wrong type.")
for outputMod in stepThreeMergeWorkflow.outputMap.keys():
self.assertTrue(len(stepThreeMergeWorkflow.outputMap[outputMod]) == 1,
"Error: more than one destination for output mod.")
return
def testDependentReDigi(self):
"""
_testDependentReDigi_
Verfiy that a dependent ReDigi workflow that keeps stages out
RAW data is created and installed into WMBS correctly.
"""
defaultArguments = ReDigiWorkloadFactory.getTestArguments()
defaultArguments["CouchURL"] = os.environ["COUCHURL"]
defaultArguments["CouchDBName"] = "redigi_t"
configs = injectReDigiConfigs(self.configDatabase)
defaultArguments["StepOneConfigCacheID"] = configs[0]
defaultArguments["StepTwoConfigCacheID"] = configs[1]
defaultArguments["StepThreeConfigCacheID"] = configs[2]
defaultArguments["StepOneOutputModuleName"] = "RAWDEBUGoutput"
defaultArguments["StepTwoOutputModuleName"] = "RECODEBUGoutput"
factory = ReDigiWorkloadFactory()
testWorkload = factory.factoryWorkloadConstruction("TestWorkload", defaultArguments)
testWMBSHelper = WMBSHelper(testWorkload, "StepOneProc", "SomeBlock", cachepath = self.testInit.testDir)
testWMBSHelper.createTopLevelFileset()
testWMBSHelper._createSubscriptionsInWMBS(testWMBSHelper.topLevelTask, testWMBSHelper.topLevelFileset)
topLevelFileset = Fileset(name = "TestWorkload-StepOneProc-SomeBlock")
topLevelFileset.loadData()
stepOneUnmergedRAWFileset = Fileset(name = "/TestWorkload/StepOneProc/unmerged-RAWDEBUGoutput")
stepOneUnmergedRAWFileset.loadData()
stepOneMergedRAWFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/merged-Merged")
stepOneMergedRAWFileset.loadData()
stepOneLogArchiveFileset = Fileset(name = "/TestWorkload/StepOneProc/unmerged-logArchive")
stepOneLogArchiveFileset.loadData()
stepOneMergeLogArchiveFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/merged-logArchive")
stepOneMergeLogArchiveFileset.loadData()
stepTwoUnmergedDQMFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/unmerged-DQMoutput")
stepTwoUnmergedDQMFileset.loadData()
stepTwoUnmergedRECOFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/unmerged-RECODEBUGoutput")
stepTwoUnmergedRECOFileset.loadData()
stepTwoMergedDQMFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeDQMoutput/merged-Merged")
stepTwoMergedDQMFileset.loadData()
stepTwoMergedRECOFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/merged-Merged")
stepTwoMergedRECOFileset.loadData()
stepTwoLogArchiveFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/unmerged-logArchive")
stepTwoLogArchiveFileset.loadData()
stepTwoMergeDQMLogArchiveFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeDQMoutput/merged-logArchive")
stepTwoMergeDQMLogArchiveFileset.loadData()
stepTwoMergeRECOLogArchiveFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/merged-logArchive")
stepTwoMergeRECOLogArchiveFileset.loadData()
stepThreeUnmergedAODFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/StepThreeProc/unmerged-aodOutputModule")
stepThreeUnmergedAODFileset.loadData()
stepThreeMergedAODFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/StepThreeProc/StepThreeProcMergeaodOutputModule/merged-Merged")
stepThreeMergedAODFileset.loadData()
stepThreeLogArchiveFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/StepThreeProc/unmerged-logArchive")
stepThreeLogArchiveFileset.loadData()
stepThreeMergeLogArchiveFileset = Fileset(name = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/StepThreeProc/StepThreeProcMergeaodOutputModule/merged-logArchive")
stepThreeMergeLogArchiveFileset.loadData()
stepOneWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc")
stepOneWorkflow.load()
self.assertEqual(stepOneWorkflow.wfType, 'reprocessing')
self.assertTrue("logArchive" in stepOneWorkflow.outputMap.keys(),
"Error: Step one missing output module.")
self.assertTrue("RAWDEBUGoutput" in stepOneWorkflow.outputMap.keys(),
"Error: Step one missing output module.")
self.assertEqual(stepOneWorkflow.outputMap["logArchive"][0]["merged_output_fileset"].id, stepOneLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepOneWorkflow.outputMap["logArchive"][0]["output_fileset"].id, stepOneLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepOneWorkflow.outputMap["RAWDEBUGoutput"][0]["merged_output_fileset"].id, stepOneMergedRAWFileset.id,
"Error: RAWDEBUG output fileset is wrong.")
self.assertEqual(stepOneWorkflow.outputMap["RAWDEBUGoutput"][0]["output_fileset"].id, stepOneUnmergedRAWFileset.id,
"Error: RAWDEBUG output fileset is wrong.")
for outputMod in stepOneWorkflow.outputMap.keys():
self.assertTrue(len(stepOneWorkflow.outputMap[outputMod]) == 1,
"Error: more than one destination for output mod.")
stepOneSub = Subscription(workflow = stepOneWorkflow, fileset = topLevelFileset)
stepOneSub.loadData()
self.assertEqual(stepOneSub["type"], "Processing",
"Error: Step one sub has wrong type.")
stepOneCleanupWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcCleanupUnmergedRAWDEBUGoutput")
stepOneCleanupWorkflow.load()
self.assertEqual(len(stepOneCleanupWorkflow.outputMap.keys()), 0,
"Error: Cleanup should have no output.")
stepOneCleanupSub = Subscription(workflow = stepOneCleanupWorkflow, fileset = stepOneUnmergedRAWFileset)
stepOneCleanupSub.loadData()
self.assertEqual(stepOneCleanupSub["type"], "Cleanup",
"Error: Step one sub has wrong type.")
stepOneLogCollectWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/LogCollect")
stepOneLogCollectWorkflow.load()
self.assertEqual(len(stepOneLogCollectWorkflow.outputMap.keys()), 0,
"Error: LogCollect should have no output.")
stepOneLogCollectSub = Subscription(workflow = stepOneLogCollectWorkflow, fileset = stepOneLogArchiveFileset)
stepOneLogCollectSub.loadData()
self.assertEqual(stepOneLogCollectSub["type"], "LogCollect",
"Error: Step one sub has wrong type.")
stepOneMergeWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput")
stepOneMergeWorkflow.load()
self.assertTrue("Merged" in stepOneMergeWorkflow.outputMap.keys(),
"Error: Step one merge missing output module.")
self.assertTrue("logArchive" in stepOneMergeWorkflow.outputMap.keys(),
"Error: Step one merge missing output module.")
self.assertEqual(stepOneMergeWorkflow.outputMap["logArchive"][0]["merged_output_fileset"].id, stepOneMergeLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepOneMergeWorkflow.outputMap["logArchive"][0]["output_fileset"].id, stepOneMergeLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepOneMergeWorkflow.outputMap["Merged"][0]["merged_output_fileset"].id, stepOneMergedRAWFileset.id,
"Error: RAWDEBUG merge output fileset is wrong.")
self.assertEqual(stepOneMergeWorkflow.outputMap["Merged"][0]["output_fileset"].id, stepOneMergedRAWFileset.id,
"Error: RAWDEBUG merge output fileset is wrong.")
for outputMod in stepOneMergeWorkflow.outputMap.keys():
self.assertTrue(len(stepOneMergeWorkflow.outputMap[outputMod]) == 1,
"Error: more than one destination for output mod.")
stepOneMergeSub = Subscription(workflow = stepOneMergeWorkflow, fileset = stepOneUnmergedRAWFileset)
stepOneMergeSub.loadData()
self.assertEqual(stepOneMergeSub["type"], "Merge",
"Error: Step one sub has wrong type.")
stepTwoWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc")
stepTwoWorkflow.load()
self.assertTrue("RECODEBUGoutput" in stepTwoWorkflow.outputMap.keys(),
"Error: Step two missing output module.")
self.assertTrue("DQMoutput" in stepTwoWorkflow.outputMap.keys(),
"Error: Step two missing output module.")
self.assertEqual(stepTwoWorkflow.outputMap["logArchive"][0]["merged_output_fileset"].id, stepTwoLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepTwoWorkflow.outputMap["logArchive"][0]["output_fileset"].id, stepTwoLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepTwoWorkflow.outputMap["RECODEBUGoutput"][0]["merged_output_fileset"].id, stepTwoMergedRECOFileset.id,
"Error: RECODEBUG output fileset is wrong.")
self.assertEqual(stepTwoWorkflow.outputMap["RECODEBUGoutput"][0]["output_fileset"].id, stepTwoUnmergedRECOFileset.id,
"Error: RECODEBUG output fileset is wrong.")
self.assertEqual(stepTwoWorkflow.outputMap["DQMoutput"][0]["merged_output_fileset"].id, stepTwoMergedDQMFileset.id,
"Error: DQM output fileset is wrong.")
self.assertEqual(stepTwoWorkflow.outputMap["DQMoutput"][0]["output_fileset"].id, stepTwoUnmergedDQMFileset.id,
"Error: DQM output fileset is wrong.")
stepTwoSub = Subscription(workflow = stepTwoWorkflow, fileset = stepOneMergedRAWFileset)
stepTwoSub.loadData()
self.assertEqual(stepTwoSub["type"], "Processing",
"Error: Step two sub has wrong type.")
for outputMod in stepTwoWorkflow.outputMap.keys():
self.assertTrue(len(stepTwoWorkflow.outputMap[outputMod]) == 1,
"Error: more than one destination for output mod.")
stepTwoCleanupDQMWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcCleanupUnmergedDQMoutput")
stepTwoCleanupDQMWorkflow.load()
self.assertEqual(len(stepTwoCleanupDQMWorkflow.outputMap.keys()), 0,
"Error: Cleanup shouldn't have any output.")
stepTwoCleanupDQMSub = Subscription(workflow = stepTwoCleanupDQMWorkflow, fileset = stepTwoUnmergedDQMFileset)
stepTwoCleanupDQMSub.loadData()
self.assertEqual(stepTwoCleanupDQMSub["type"], "Cleanup",
"Error: Step two sub has wrong type.")
stepTwoCleanupRECOWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcCleanupUnmergedRECODEBUGoutput")
stepTwoCleanupRECOWorkflow.load()
self.assertEqual(len(stepTwoCleanupRECOWorkflow.outputMap.keys()), 0,
"Error: Cleanup shouldn't have any output.")
stepTwoCleanupRECOSub = Subscription(workflow = stepTwoCleanupRECOWorkflow, fileset = stepTwoUnmergedRECOFileset)
stepTwoCleanupRECOSub.loadData()
self.assertEqual(stepTwoCleanupRECOSub["type"], "Cleanup",
"Error: Step two sub has wrong type.")
stepTwoLogCollectWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcLogCollect")
stepTwoLogCollectWorkflow.load()
self.assertEqual(len(stepTwoLogCollectWorkflow.outputMap.keys()), 0,
"Error: LogCollect shouldn't have any output.")
stepTwoLogCollectSub = Subscription(workflow = stepTwoLogCollectWorkflow, fileset = stepTwoLogArchiveFileset)
stepTwoLogCollectSub.loadData()
self.assertEqual(stepTwoLogCollectSub["type"], "LogCollect",
"Error: Step two sub has wrong type.")
stepTwoMergeRECOWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput")
stepTwoMergeRECOWorkflow.load()
self.assertTrue("Merged" in stepTwoMergeRECOWorkflow.outputMap.keys(),
"Error: Step two merge missing output module.")
self.assertTrue("logArchive" in stepTwoMergeRECOWorkflow.outputMap.keys(),
"Error: Step two merge missing output module.")
self.assertEqual(stepTwoMergeRECOWorkflow.outputMap["logArchive"][0]["merged_output_fileset"].id, stepTwoMergeRECOLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepTwoMergeRECOWorkflow.outputMap["logArchive"][0]["output_fileset"].id, stepTwoMergeRECOLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepTwoMergeRECOWorkflow.outputMap["Merged"][0]["merged_output_fileset"].id, stepTwoMergedRECOFileset.id,
"Error: RECODEBUG merge output fileset is wrong.")
self.assertEqual(stepTwoMergeRECOWorkflow.outputMap["Merged"][0]["output_fileset"].id, stepTwoMergedRECOFileset.id,
"Error: RECODEBUG merge output fileset is wrong.")
stepTwoMergeRECOSub = Subscription(workflow = stepTwoMergeRECOWorkflow, fileset = stepTwoUnmergedRECOFileset)
stepTwoMergeRECOSub.loadData()
self.assertEqual(stepTwoMergeRECOSub["type"], "Merge",
"Error: Step two sub has wrong type.")
for outputMod in stepTwoMergeRECOWorkflow.outputMap.keys():
self.assertTrue(len(stepTwoMergeRECOWorkflow.outputMap[outputMod]) == 1,
"Error: more than one destination for output mod.")
stepTwoMergeDQMWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeDQMoutput")
stepTwoMergeDQMWorkflow.load()
self.assertTrue("Merged" in stepTwoMergeDQMWorkflow.outputMap.keys(),
"Error: Step two merge missing output module.")
self.assertTrue("logArchive" in stepTwoMergeDQMWorkflow.outputMap.keys(),
"Error: Step two merge missing output module.")
self.assertEqual(stepTwoMergeDQMWorkflow.outputMap["logArchive"][0]["merged_output_fileset"].id, stepTwoMergeDQMLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepTwoMergeDQMWorkflow.outputMap["logArchive"][0]["output_fileset"].id, stepTwoMergeDQMLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepTwoMergeDQMWorkflow.outputMap["Merged"][0]["merged_output_fileset"].id, stepTwoMergedDQMFileset.id,
"Error: DQM merge output fileset is wrong.")
self.assertEqual(stepTwoMergeDQMWorkflow.outputMap["Merged"][0]["output_fileset"].id, stepTwoMergedDQMFileset.id,
"Error: DQM merge output fileset is wrong.")
stepTwoMergeDQMSub = Subscription(workflow = stepTwoMergeDQMWorkflow, fileset = stepTwoUnmergedDQMFileset)
stepTwoMergeDQMSub.loadData()
self.assertEqual(stepTwoMergeDQMSub["type"], "Merge",
"Error: Step two sub has wrong type.")
for outputMod in stepTwoMergeDQMWorkflow.outputMap.keys():
self.assertTrue(len(stepTwoMergeDQMWorkflow.outputMap[outputMod]) == 1,
"Error: more than one destination for output mod.")
stepThreeWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/StepThreeProc")
stepThreeWorkflow.load()
self.assertTrue("aodOutputModule" in stepThreeWorkflow.outputMap.keys(),
"Error: Step three missing output module.")
self.assertTrue("logArchive" in stepThreeWorkflow.outputMap.keys(),
"Error: Step three missing output module.")
self.assertEqual(stepThreeWorkflow.outputMap["logArchive"][0]["merged_output_fileset"].id, stepThreeLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepThreeWorkflow.outputMap["logArchive"][0]["output_fileset"].id, stepThreeLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepThreeWorkflow.outputMap["aodOutputModule"][0]["merged_output_fileset"].id, stepThreeMergedAODFileset.id,
"Error: RECODEBUG output fileset is wrong.")
self.assertEqual(stepThreeWorkflow.outputMap["aodOutputModule"][0]["output_fileset"].id, stepThreeUnmergedAODFileset.id,
"Error: RECODEBUG output fileset is wrong.")
stepThreeSub = Subscription(workflow = stepThreeWorkflow, fileset = stepTwoMergedRECOFileset)
stepThreeSub.loadData()
self.assertEqual(stepThreeSub["type"], "Processing",
"Error: Step three sub has wrong type.")
for outputMod in stepThreeWorkflow.outputMap.keys():
self.assertTrue(len(stepThreeWorkflow.outputMap[outputMod]) == 1,
"Error: more than one destination for output mod.")
stepThreeCleanupWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/StepThreeProc/StepThreeProcCleanupUnmergedaodOutputModule")
stepThreeCleanupWorkflow.load()
self.assertEqual(len(stepThreeCleanupWorkflow.outputMap.keys()), 0,
"Error: Cleanup should have no output.")
stepThreeCleanupSub = Subscription(workflow = stepThreeCleanupWorkflow, fileset = stepThreeUnmergedAODFileset)
stepThreeCleanupSub.loadData()
self.assertEqual(stepThreeCleanupSub["type"], "Cleanup",
"Error: Step three sub has wrong type.")
stepThreeLogCollectWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/StepThreeProc/StepThreeProcLogCollect")
stepThreeLogCollectWorkflow.load()
self.assertEqual(len(stepThreeLogCollectWorkflow.outputMap.keys()), 0,
"Error: LogCollect should have no output.")
stepThreeLogCollectSub = Subscription(workflow = stepThreeLogCollectWorkflow, fileset = stepThreeLogArchiveFileset)
stepThreeLogCollectSub.loadData()
self.assertEqual(stepThreeLogCollectSub["type"], "LogCollect",
"Error: Step three sub has wrong type.")
stepThreeMergeWorkflow = Workflow(spec = "somespec", name = "TestWorkload",
task = "/TestWorkload/StepOneProc/StepOneProcMergeRAWDEBUGoutput/StepTwoProc/StepTwoProcMergeRECODEBUGoutput/StepThreeProc/StepThreeProcMergeaodOutputModule")
stepThreeMergeWorkflow.load()
self.assertTrue("Merged" in stepThreeMergeWorkflow.outputMap.keys(),
"Error: Step three merge missing output module.")
self.assertTrue("logArchive" in stepThreeMergeWorkflow.outputMap.keys(),
"Error: Step three merge missing output module.")
self.assertEqual(stepThreeMergeWorkflow.outputMap["logArchive"][0]["merged_output_fileset"].id, stepThreeMergeLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepThreeMergeWorkflow.outputMap["logArchive"][0]["output_fileset"].id, stepThreeMergeLogArchiveFileset.id,
"Error: logArchive fileset is wrong.")
self.assertEqual(stepThreeMergeWorkflow.outputMap["Merged"][0]["merged_output_fileset"].id, stepThreeMergedAODFileset.id,
"Error: AOD merge output fileset is wrong.")
self.assertEqual(stepThreeMergeWorkflow.outputMap["Merged"][0]["output_fileset"].id, stepThreeMergedAODFileset.id,
"Error: AOD merge output fileset is wrong.")
stepThreeMergeSub = Subscription(workflow = stepThreeMergeWorkflow, fileset = stepThreeUnmergedAODFileset)
stepThreeMergeSub.loadData()
self.assertEqual(stepThreeMergeSub["type"], "Merge",
"Error: Step three sub has wrong type.")
for outputMod in stepThreeMergeWorkflow.outputMap.keys():
self.assertTrue(len(stepThreeMergeWorkflow.outputMap[outputMod]) == 1,
"Error: more than one destination for output mod.")
return
