def OnButtonPTT(self, event):
btn = event.GetEventObject()
if btn.GetValue():
QS.set_PTT(1)
QS.set_key_down(1)
else:
QS.set_PTT(0)
QS.set_key_down(0)
def OnButtonPTT(self, event):
btn = event.GetEventObject()
if btn.GetValue(): # Turn the software key bit on or off
self.button_PTT = 1
else:
self.button_PTT = 0
QS.set_key_down(self.button_PTT)
self.NewUdpStatus()
def OnPTT(self, ptt):
if self.key_thread:
self.key_thread.OnPTT(ptt)
elif self.usb_dev:
QS.set_key_down(ptt)
try:
self.usb_dev.ctrl_transfer(IN, 0x50, ptt, 0, 3)
except usb.core.USBError:
QS.set_key_down(0)
if DEBUG: traceback.print_exc()
def OnPTT(self, ptt):
if self.key_thread:
self.key_thread.OnPTT(ptt)
elif self.usb_dev:
QS.set_key_down(ptt)
try:
self.usb_dev.ctrl_transfer(IN, 0x50, ptt, 0, 3)
except usb.core.USBError:
QS.set_key_down(0)
if DEBUG: traceback.print_exc()
def OnButtonPTT(self, event=None):
self.ptt_button=0
if event:
if event.GetEventObject().GetValue():
self.ptt_button = 1
if DEBUG: print('PTT pressed')
else:
if DEBUG: print('PTT released')
self.ptt_button = 0
self.receiver.set_ptt(Hamlib.RIG_VFO_CURR,self.ptt_button)
QS.set_key_down(self.ptt_button)
def OnButtonPTT(self, event=None):
if event:
if event.GetEventObject().GetValue():
cmdstr='*x1\r'
if DEBUG: print('PTT pressed')
else:
if DEBUG: print('PTT released')
cmdstr='*x0\r'
if serialport.isOpen():
if DEBUG == 1:
print("Setting ptt, pttstring: ", cmdstr)
serialport.write(cmdstr.encode())
QS.set_key_down(event.GetEventObject().GetValue())
def OnButtonPTT(self, event=None):
if event:
if event.GetEventObject().GetValue():
self.ptt_button = 1
message = "set ptt on"
else:
self.ptt_button = 0
message = "set ptt off"
#srsock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
#srsock.settimeout(1)
#srsock.sendto(message, (self.usbsr_ip_address, self.usbsr_port))
#data, addr = srsock.recvfrom(1024) # buffer size is 1024 bytes
#srsock.close()
#print (data)
#if data == "ok":
QS.set_key_down(self.ptt_button)
def run(self):
while not self.doQuit.isSet():
try:
if self.ptt:
key_down = 1
else: # read key state
ret = self.usb_dev.ctrl_transfer(IN, 0x51, 0, 0, 1)
# bit 0x20 is the tip, bit 0x02 is the ring
if ret[0] & 0x20: # Tip: key is up
key_down = 0
else: # key is down
key_down = 1
if key_down != self.key_down:
self.key_down = key_down
self.usb_dev.ctrl_transfer(IN, 0x50, key_down, 0, 3)
QS.set_key_down(key_down)
except usb.core.USBError:
QS.set_key_down(0)
if DEBUG: traceback.print_exc()
time.sleep(self.poll_secs)
def OnButtonPTT(self, event=None):
if event:
if event.GetEventObject().GetValue():
self.ptt_button = 1
message = "set ptt on"
else:
self.ptt_button = 0
message = "set ptt off"
srsock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
srsock.settimeout(1)
srsock.sendto(message, (self.usbsr_ip_address, self.usbsr_port))
data, addr = srsock.recvfrom(1024) # buffer size is 1024 bytes
srsock.close()
print (data)
if data == "ok":
QS.set_key_down(self.ptt_button)
else:
print ('error doing', message)
text = "error setting ptt on or off!"
self.config_text = text
def OnButtonPTT(self, event=None):
if event:
if event.GetEventObject().GetValue():
self.ptt_button = 1
message = "set ptt on"
else:
self.ptt_button = 0
message = "set ptt off"
srsock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
srsock.settimeout(1)
srsock.sendto(message, (self.usbsr_ip_address, self.usbsr_port))
data, addr = srsock.recvfrom(1024) # buffer size is 1024 bytes
srsock.close()
print(data)
if data == "ok":
QS.set_key_down(self.ptt_button)
else:
print('error doing', message)
text = "error setting ptt on or off!"
self.config_text = text
def run(self):
while not self.doQuit.isSet():
try:
if self.ptt:
key_down = 1
else: # read key state
ret = self.usb_dev.ctrl_transfer(IN, 0x51, 0, 0, 1)
# bit 0x20 is the tip, bit 0x02 is the ring
if ret[0] & 0x20: # Tip: key is up
key_down = 0
else: # key is down
key_down = 1
if key_down != self.key_down:
self.key_down = key_down
self.usb_dev.ctrl_transfer(IN, 0x50, key_down, 0, 3)
QS.set_key_down(key_down)
except usb.core.USBError:
QS.set_key_down(0)
if DEBUG: traceback.print_exc()
time.sleep(self.poll_secs)
def OnButtonPTT(self, event=None):
if event:
if event.GetEventObject().GetValue():
self.ptt_button = 1
else:
self.ptt_button = 0
if self.key_thread:
self.key_thread.OnPTT(self.ptt_button)
elif self.usb_dev:
if self.is_cw:
QS.set_key_down(0)
QS.set_transmit_mode(self.ptt_button)
else:
QS.set_key_down(self.ptt_button)
try:
self.usb_dev.ctrl_transfer(IN, 0x50, self.ptt_button, 0, 3)
except usb.core.USBError:
if DEBUG: traceback.print_exc()
try:
self.usb_dev.ctrl_transfer(IN, 0x50, self.ptt_button, 0, 3)
except usb.core.USBError:
if DEBUG: traceback.print_exc()
def OnButtonPTT(self, event=None):
if event:
if event.GetEventObject().GetValue():
self.ptt_button = 1
else:
self.ptt_button = 0
if self.key_thread:
self.key_thread.OnPTT(self.ptt_button)
elif self.usb_dev:
if self.is_cw:
QS.set_key_down(0)
QS.set_transmit_mode(self.ptt_button)
else:
QS.set_key_down(self.ptt_button)
try:
self.usb_dev.ctrl_transfer(IN, 0x50, self.ptt_button, 0, 3)
except usb.core.USBError:
if DEBUG: traceback.print_exc()
try:
self.usb_dev.ctrl_transfer(IN, 0x50, self.ptt_button, 0, 3)
except usb.core.USBError:
if DEBUG: traceback.print_exc()
def run(self):
while not self.doQuit.isSet():
try: # Test key up/down state
ret = self.usb_dev.ctrl_transfer(IN, 0x51, 0, 0, 1)
except usb.core.USBError:
key_down = None
if DEBUG: traceback.print_exc()
else:
# bit 0x20 is the tip, bit 0x02 is the ring (ring not used)
if ret[0] & 0x20 == 0: # Tip: key is down
key_down = True
else: # key is up
key_down = False
if self.is_cw:
if self.spot_level >= 0 or key_down: # key is down
QS.set_key_down(1)
self.key_transmit = 1
self.key_timer = time.time()
else: # key is up
QS.set_key_down(0)
if self.key_transmit and time.time(
) - self.key_timer > self.key_hang_time:
self.key_transmit = 0
if self.key_transmit != self.currently_in_tx:
try:
self.usb_dev.ctrl_transfer(IN, 0x50, self.key_transmit,
0, 3)
except usb.core.USBError:
if DEBUG: traceback.print_exc()
else:
self.currently_in_tx = self.key_transmit # success
QS.set_transmit_mode(self.key_transmit)
if DEBUG:
print("Change CW currently_in_tx",
self.currently_in_tx)
else:
if key_down or self.ptt_button:
self.key_transmit = 1
else:
self.key_transmit = 0
if self.key_transmit != self.currently_in_tx:
QS.set_key_down(self.key_transmit)
try:
self.usb_dev.ctrl_transfer(IN, 0x50, self.key_transmit,
0, 3)
except usb.core.USBError:
if DEBUG: traceback.print_exc()
else:
self.currently_in_tx = self.key_transmit # success
if DEBUG:
print("Change currently_in_tx",
self.currently_in_tx)
time.sleep(self.poll_secs)
def run(self):
while not self.doQuit.isSet():
try: # Test key up/down state
ret = self.usb_dev.ctrl_transfer(IN, 0x51, 0, 0, 1)
except usb.core.USBError:
key_down = None
if DEBUG: traceback.print_exc()
else:
# bit 0x20 is the tip, bit 0x02 is the ring (ring not used)
if ret[0] & 0x20 == 0: # Tip: key is down
key_down = True
else: # key is up
key_down = False
if self.is_cw:
if self.spot_level >= 0 or key_down: # key is down
QS.set_key_down(1)
self.key_transmit = 1
self.key_timer = time.time()
else: # key is up
QS.set_key_down(0)
if self.key_transmit and time.time() - self.key_timer > self.key_hang_time:
self.key_transmit = 0
if self.key_transmit != self.currently_in_tx:
try:
self.usb_dev.ctrl_transfer(IN, 0x50, self.key_transmit, 0, 3)
except usb.core.USBError:
if DEBUG: traceback.print_exc()
else:
self.currently_in_tx = self.key_transmit # success
QS.set_transmit_mode(self.key_transmit)
if DEBUG: print ("Change CW currently_in_tx", self.currently_in_tx)
else:
if key_down or self.ptt_button:
self.key_transmit = 1
else:
self.key_transmit = 0
if self.key_transmit != self.currently_in_tx:
QS.set_key_down(self.key_transmit)
try:
self.usb_dev.ctrl_transfer(IN, 0x50, self.key_transmit, 0, 3)
except usb.core.USBError:
if DEBUG: traceback.print_exc()
else:
self.currently_in_tx = self.key_transmit # success
if DEBUG: print ("Change currently_in_tx", self.currently_in_tx)
time.sleep(self.poll_secs)
def run(self):
while not self.doQuit.isSet():
if DEBUG:
if not self.text == "":
print("DeBug: self.text: %s" % self.text)
self.text = ""
try: # Test key up/down state
#ret = self.usb_dev.ctrl_transfer(IN, 0x51, 0, 0, 1)
if self.serial: ##JMH 20190909 ADDED to support keying SSMicro via external key
chars = self.serial.read(1024)
if chars:
if (self.HrdwrTalk): print("SSMicro: %s" % chars)
if (chars[0:6] == "KEYDWN"):
self.key_down = True
self.stateChng = True
self.stateChng1 = True
if (chars[0:5] == "KEYUP"):
self.key_down = False
self.stateChng = True
self.stateChng1 = True
except usb.core.USBError:
if DEBUG: traceback.print_exc()
if self.is_cw:
if self.stateChng:
if self.spot_level >= 0 or self.key_down: # key is down
QS.set_key_down(1)
self.key_transmit = 1
#self.key_timer = time.time()
else: # key is up
QS.set_key_down(0)
## if self.key_transmit and time.time() - self.key_timer > self.key_hang_time:
## self.key_transmit = 0
self.stateChng = False
if self.spot_level >= 0 or self.key_down: # key is down
self.key_timer = time.time()
else:
if self.key_transmit and time.time(
) - self.key_timer > self.key_hang_time:
self.key_transmit = 0
if self.key_transmit != self.currently_in_tx:
QS.set_transmit_mode(self.key_transmit)
#wx.CallAfter(self.application.OnButtonPTT(None))
#self.application.pttButton.SetValue(0, self.key_transmit)
#self.ptt_button = self.key_transmit
self.currently_in_tx = self.key_transmit # success
## try:
## #self.usb_dev.ctrl_transfer(IN, 0x50, self.key_transmit, 0, 3)
## print("key_transmit state %d" %self.key_transmit)
## except usb.core.USBError:
## if DEBUG: traceback.print_exc()
## else:
## self.currently_in_tx = self.key_transmit # success
## QS.set_transmit_mode(self.key_transmit)
## if DEBUG: print ("Change CW currently_in_tx", self.currently_in_tx)
## else: #weare not in the CW mode
## if self.key_down or self.ptt_button:
## self.key_transmit = 1
## else:
## self.key_transmit = 0
## if self.key_transmit != self.currently_in_tx:
## QS.set_key_down(self.key_transmit)
## try:
## #self.usb_dev.ctrl_transfer(IN, 0x50, self.key_transmit, 0, 3)
## print("key_transmit state %d" %self.key_transmit)
## except usb.core.USBError:
## if DEBUG: traceback.print_exc()
## else:
## self.currently_in_tx = self.key_transmit # success
## if DEBUG: print ("Change currently_in_tx", self.currently_in_tx)
time.sleep(self.poll_secs)
def OnButtonPTT(self, event):
if event.GetEventObject().GetValue():
QS.set_key_down(1)
else:
QS.set_key_down(0)
def OnButtonPTT(self, event):
if event.GetEventObject().GetValue():
QS.set_key_down(1)
else:
QS.set_key_down(0)
