def test_simplestru_units(self):
pm = SimpleStru("ParametricModel")
elev = pm.Params.h - 0.4
offset_Y = 0.4
pipe1 = Pipe(
"Pipe1",
[
(0, offset_Y, elev),
(pm.Params.w + 0.4, offset_Y, elev),
(pm.Params.w + 0.4, pm.Params.l + 0.4, elev),
(pm.Params.w + 0.4, pm.Params.l + 0.4, 0.4),
(0, pm.Params.l + 0.4, 0.4),
],
Section("PSec1", "PIPE", r=0.1, wt=10e-3),
)
pipe2 = Pipe(
"Pipe2",
[
(0.5, offset_Y + 0.5, elev + 1.4),
(0.5, offset_Y + 0.5, elev),
(0.2 + pm.Params.w, offset_Y + 0.5, elev),
(0.2 + pm.Params.w, pm.Params.l + 0.4, elev),
(0.2 + pm.Params.w, pm.Params.l + 0.4, 0.6),
(0, pm.Params.l + 0.4, 0.6),
],
Section("PSec1", "PIPE", r=0.05, wt=5e-3),
)
a = Assembly("ParametricSite")
a.add_part(pm)
pm.add_pipe(pipe1)
pm.add_pipe(pipe2)
for p in pm.parts.values():
if type(p) is ReinforcedFloor:
p.penetration_check()
a.units = "mm"
a.to_ifc(test_folder / "my_simple_stru_mm.ifc")
def make_it_complex():
from ada import Assembly, Pipe, Section
a = Assembly("ParametricSite")
pm = SimpleStru("ParametricModel")
a.add_part(pm)
elev = pm.Params.h - 0.4
offset_Y = 0.4
pipe1 = Pipe(
"Pipe1",
[
(0, offset_Y, elev),
(pm.Params.w + 0.4, offset_Y, elev),
(pm.Params.w + 0.4, pm.Params.l + 0.4, elev),
(pm.Params.w + 0.4, pm.Params.l + 0.4, 0.4),
(0, pm.Params.l + 0.4, 0.4),
],
Section("PSec1", "PIPE", r=0.1, wt=10e-3),
)
pipe2 = Pipe(
"Pipe2",
[
(0.5, offset_Y + 0.5, elev + 1.4),
(0.5, offset_Y + 0.5, elev),
(0.2 + pm.Params.w, offset_Y + 0.5, elev),
(0.2 + pm.Params.w, pm.Params.l + 0.4, elev),
(0.2 + pm.Params.w, pm.Params.l + 0.4, 0.6),
(0, pm.Params.l + 0.4, 0.6),
],
Section("PSec1", "PIPE", r=0.05, wt=5e-3),
)
pm.add_pipe(pipe1)
pm.add_pipe(pipe2)
for p in pm.parts.values():
if type(p) is ReinforcedFloor:
p.penetration_check()
return a
def test_pipe_straight(self):
a = Assembly("MyTest")
p = Part("MyPart")
a.add_part(p)
z = 3.2
y0 = -200e-3
pipe1 = Pipe("Pipe1", [(0, y0, 0), (0, y0, z)],
Section("PSec", "PIPE", r=0.10, wt=5e-3))
p.add_pipe(pipe1)
a.to_ifc(test_folder / "pipe_straight.ifc")
a._repr_html_()
def test_pipe_straight(dummy_display):
a = Assembly("MyTest")
p = Part("MyPart")
a.add_part(p)
z = 3.2
y0 = -200e-3
pipe1 = Pipe("Pipe1", [(0, y0, 0), (0, y0, z)],
Section("PSec", "PIPE", r=0.10, wt=5e-3))
p.add_pipe(pipe1)
_ = a.to_ifc(test_dir / "pipe_straight.ifc", return_file_obj=True)
dummy_display(a)
def test_add_piping(self):
a = Assembly("ParametricSite")
pm = SimpleStru("ParametricModel")
a.add_part(pm)
elev = pm.Params.h - 0.4
offset_Y = 0.4
pipe1 = Pipe(
"Pipe1",
[
(0, offset_Y, elev),
(pm.Params.w + 0.4, offset_Y, elev),
(pm.Params.w + 0.4, pm.Params.l + 0.4, elev),
(pm.Params.w + 0.4, pm.Params.l + 0.4, 0.4),
(0, pm.Params.l + 0.4, 0.4),
],
Section("PSec1", "PIPE", r=0.1, wt=10e-3),
)
pipe2 = Pipe(
"Pipe2",
[
(0.5, offset_Y + 0.5, elev + 1.4),
(0.5, offset_Y + 0.5, elev),
(0.2 + pm.Params.w, offset_Y + 0.5, elev),
(0.2 + pm.Params.w, pm.Params.l + 0.4, elev),
(0.2 + pm.Params.w, pm.Params.l + 0.4, 0.6),
(0, pm.Params.l + 0.4, 0.6),
],
Section("PSec1", "PIPE", r=0.05, wt=5e-3),
)
pm.add_pipe(pipe1)
pm.add_pipe(pipe2)
for p in pm.parts.values():
if "floor" in p.name:
p.penetration_check()
a.to_ifc(test_folder / "my_simple_stru.ifc")
def simplestru_with_cutouts():
pm = SimpleStru("ParametricModel")
a = Assembly("ParametricSite") / pm
elev = pm.Params.h - 0.4
offset_y = 0.4
pipe1 = Pipe(
"Pipe1",
[
(0, offset_y, elev),
(pm.Params.w + 0.4, offset_y, elev),
(pm.Params.w + 0.4, pm.Params.l + 0.4, elev),
(pm.Params.w + 0.4, pm.Params.l + 0.4, 0.4),
(0, pm.Params.l + 0.4, 0.4),
],
Section("PSec1", "PIPE", r=0.1, wt=10e-3),
)
pipe2 = Pipe(
"Pipe2",
[
(0.5, offset_y + 0.5, elev + 1.4),
(0.5, offset_y + 0.5, elev),
(0.2 + pm.Params.w, offset_y + 0.5, elev),
(0.2 + pm.Params.w, pm.Params.l + 0.4, elev),
(0.2 + pm.Params.w, pm.Params.l + 0.4, 0.6),
(0, pm.Params.l + 0.4, 0.6),
],
Section("PSec2", "PIPE", r=0.05, wt=5e-3),
)
pm.add_part(Part("Piping") / [pipe1, pipe2])
for p in pm.parts.values():
if type(p) is ReinforcedFloor:
penetration_check(p)
return a
def test_pipe_bend(self):
a = Assembly("MyTest")
p = a.add_part(Part("MyPart"))
pipe1 = Pipe(
"Pipe1",
[
(0, y0, z),
(5 + x0, y0, z),
(5 + x0, y0 + 5, z),
(10, y0 + 5, z + 2),
(10, y0 + 5, z + 10),
],
Section("PSec", "PIPE", r=0.10, wt=5e-3),
)
p.add_pipe(pipe1)
a.to_ifc(test_folder / "pipe_bend.ifc")
def assembly() -> Assembly:
bm1 = Beam("bm1", (0, 0, 1), (1, 0, 1), "IPE300")
bm2 = Beam("bm2", (1.1, 0, 1), (2, 0, 1), "IPE300")
bm3 = Beam("bm3", (2.1, 0, 1), (3, 0, 1), "IPE300")
placement = Placement(origin=(1, 1, 1), xdir=(1, 0, 0), zdir=(0, 0, 1))
pl_points = [(0, 0), (1, 0), (1, 1), (0, 1)]
pl1 = Plate("pl1", pl_points, 10e-3, placement=placement)
pipe = Pipe("pipe", [(0, 0.5, 0), (1, 0.5, 0), (1.2, 0.7, 0.2),
(1.5, 0.7, 0.2)], "OD120x6")
p1, p2 = (1, -2, 0), (2, -1, 1)
shp1 = PrimBox("MyBox", p1, p2)
shp1.add_penetration(PrimSphere("MyCutout", p1, 0.5))
return Assembly() / (Part("MyFemObjects") /
[bm1, bm2, bm3, pl1, shp1, pipe])
def test_ifc_reimport():
# Model to be re-imported
a = Assembly("my_test_assembly") / SimpleStru("my_simple_stru")
fp = a.to_ifc(test_folder / "my_exported_param_model.ifc",
return_file_obj=True)
points = [(0, 0, 0), (5, 0, 0), (5, 5, 0)]
w = Wall("MyWall", points, 3, 0.15, offset="LEFT")
wi = Window("MyWindow1", 1.5, 1, 0.15)
wi2 = Window("MyWindow2", 2, 1, 0.15)
door = Door("Door1", 1.5, 2, 0.2)
w.add_insert(wi, 0, 1, 1.2)
w.add_insert(wi2, 1, 1, 1.2)
w.add_insert(door, 0, 3.25, 0)
p = Part("MyPart")
p.add_elements_from_ifc(fp)
p.add_wall(w)
z = 3.2
y0 = -200e-3
x0 = -y0
pipe1 = Pipe(
"Pipe1",
[
(0, y0, z),
(5 + x0, y0, z),
(5 + x0, y0 + 5, z),
(10, y0 + 5, z + 2),
(10, y0 + 5, z + 10),
],
Section("PSec1", "PIPE", r=0.10, wt=5e-3),
)
p.add_pipe(pipe1)
b = Assembly("MyTest") / p
b.units = "mm"
b.to_ifc(test_folder / "my_reimport_of_elements_mm.ifc")
# TODO: Re-import is still not supported. Should look into same approach as BlenderBIM by
# only communicating and updating the ifcopenshell file object.
b.units = "m"
def test_pipe_bend():
z = 3.2
y0 = -200e-3
x0 = -y0
pipe1 = Pipe(
"Pipe1",
[
(0, y0, z),
(5 + x0, y0, z),
(5 + x0, y0 + 5, z),
(10, y0 + 5, z + 2),
(10, y0 + 5, z + 10),
],
Section("PSec", "PIPE", r=0.10, wt=5e-3),
)
assert pipe1.segments[1].bend_radius == pytest.approx(0.195958125)
def test_pipe_bend(self):
a = Assembly("MyTest")
p = Part("MyPart")
a.add_part(p)
z = 3.2
y0 = -200e-3
x0 = -y0
pipe1 = Pipe(
"Pipe1",
[
(0, y0, z),
(5 + x0, y0, z),
(5 + x0, y0 + 5, z),
(10, y0 + 5, z + 2),
(10, y0 + 5, z + 10),
],
Section("PSec", "PIPE", r=0.10, wt=5e-3),
)
p.add_pipe(pipe1)
a.to_ifc(test_folder / "pipe_bend.ifc")
a._repr_html_()
def test_ifc_reimport(self):
# Model to be re-imported
a = Assembly("my_test_assembly") / SimpleStru("my_simple_stru")
a.to_ifc(test_folder / "my_exported_param_model.ifc")
points = [(0, 0, 0), (5, 0, 0), (5, 5, 0)]
w = Wall("MyWall", points, 3, 0.15, offset="LEFT")
wi = Window("MyWindow1", 1.5, 1, 0.15)
wi2 = Window("MyWindow2", 2, 1, 0.15)
door = Door("Door1", 1.5, 2, 0.2)
w.add_insert(wi, 0, 1, 1.2)
w.add_insert(wi2, 1, 1, 1.2)
w.add_insert(door, 0, 3.25, 0)
p = Part("MyPart")
p.add_elements_from_ifc(test_folder / "my_exported_param_model.ifc")
p.add_wall(w)
z = 3.2
y0 = -200e-3
x0 = -y0
pipe1 = Pipe(
"Pipe1",
[
(0, y0, z),
(5 + x0, y0, z),
(5 + x0, y0 + 5, z),
(10, y0 + 5, z + 2),
(10, y0 + 5, z + 10),
],
Section("PSec1", "PIPE", r=0.10, wt=5e-3),
)
p.add_pipe(pipe1)
b = Assembly("MyTest") / p
b.units = "mm"
b.to_ifc(test_folder / "my_reimport_of_elements_mm.ifc")