Python BluefruitSPI.command_check_OK示例

示例#1

文件： bluefruitspi_simpletest.py 项目： mbaaba/solar_panel

import time
import busio
import board
from digitalio import DigitalInOut
from adafruit_bluefruitspi import BluefruitSPI

spi_bus = busio.SPI(board.SCK, MOSI=board.MOSI, MISO=board.MISO)
cs = DigitalInOut(board.D8)
irq = DigitalInOut(board.D7)
rst = DigitalInOut(board.D4)
bluefruit = BluefruitSPI(spi_bus, cs, irq, rst, debug=False)

# Initialize the device and perform a factory reset
print("Initializing the Bluefruit LE SPI Friend module")
bluefruit.init()
bluefruit.command_check_OK(b'AT+FACTORYRESET', delay=1)

# Print the response to 'ATI' (info request) as a string
print(str(bluefruit.command_check_OK(b'ATI'), 'utf-8'))

# Change advertised name
bluefruit.command_check_OK(b'AT+GAPDEVNAME=BlinkaBLE')

while True:
    print("Waiting for a connection to Bluefruit LE Connect ...")
    # Wait for a connection ...
    dotcount = 0
    while not bluefruit.connected:
        print(".", end="")
        dotcount = (dotcount + 1) % 80
        if dotcount == 79:

示例#2

文件： RFM69_Bluetooth_LSM303_NXP.py 项目： hybotics/MeshNetwork

#	Initialize the I2C bus
i2c = busio.I2C(board.SCL, board.SDA)

#   Initialize the SPI bus
spi = busio.SPI(SPI_SCK, MOSI=SPI_MOSI, MISO=SPI_MISO)

print()
print("{0} v{1:1.1f}".format(BLUEFRUIT_DEV_NAME, SCRIPT_VERSION))

#   Initialize the Bluefruit LE SPI Friend and perform a factory reset
bluefruit = BluefruitSPI(spi, cs=BLUEFRUIT_CS, irq=BLUEFRUIT_IRQ, reset=BLUEFRUIT_RST)

print()
print("Initializing Bluetooth")
bluefruit.init()
bluefruit.command_check_OK(b'AT+FACTORYRESET', delay=1)

#   Print the response to 'ATI' (info request) as a string
print(str(bluefruit.command_check_OK(b'ATI'), 'utf-8'))

#   Change advertised name
bluefruit.command_check_OK(b'AT+GAPDEVNAME=' + BLUEFRUIT_DEV_NAME)

#   Set the name of the beacon
##BLUEFRUIT_BEACON_NAME = "FrankBLE"
##bluefruit.command_check_OK(b'AT+BLEURIBEACON=' BLUEFRUIT_BEACON_NAME) 

#   Initialze RFM69 radio
print("Initializing the RFM69 radio")
rfm69 = adafruit_rfm69.RFM69(spi, RFM69_CS, RFM69_RST, RFM69_RADIO_FREQ_MHZ)

示例#3

import time
import busio
import board
from digitalio import DigitalInOut
from adafruit_bluefruitspi import BluefruitSPI

spi_bus = busio.SPI(board.SCK, MOSI=board.MOSI, MISO=board.MISO)
cs = DigitalInOut(board.D8)
irq = DigitalInOut(board.D7)
rst = DigitalInOut(board.D4)
bluefruit = BluefruitSPI(spi_bus, cs, irq, rst, debug=False)

# Initialize the device and perform a factory reset
print("Initializing the Bluefruit LE SPI Friend module")
bluefruit.init()
bluefruit.command_check_OK(b"AT+FACTORYRESET", delay=1)

# Print the response to 'ATI' (info request) as a string
print(str(bluefruit.command_check_OK(b"ATI"), "utf-8"))

# Change advertised name
bluefruit.command_check_OK(b"AT+GAPDEVNAME=BlinkaBLE")

while True:
    print("Waiting for a connection to Bluefruit LE Connect ...")
    # Wait for a connection ...
    dotcount = 0
    while not bluefruit.connected:
        print(".", end="")
        dotcount = (dotcount + 1) % 80
        if dotcount == 79:

示例#4

文件： bluefruitspi_simpletest.py 项目： eiselekd/hw

import time
import busio
import board
from digitalio import DigitalInOut
from adafruit_bluefruitspi import BluefruitSPI

spi_bus = busio.SPI(board.SCK, MOSI=board.MOSI, MISO=board.MISO)
cs = DigitalInOut(board.D8)
irq = DigitalInOut(board.D7)
rst = DigitalInOut(board.D4)
bluefruit = BluefruitSPI(spi_bus, cs, irq, rst, debug=False)

# Initialize the device and perform a factory reset
print("Initializing the Bluefruit LE SPI Friend module")
bluefruit.init()
bluefruit.command_check_OK(b'AT+FACTORYRESET', delay=1)

# Print the response to 'ATI' (info request) as a string
print(str(bluefruit.command_check_OK(b'ATI'), 'utf-8'))

# Change advertised name
bluefruit.command_check_OK(b'AT+GAPDEVNAME=BlinkaBLE')

while True:
    print("Waiting for a connection to Bluefruit LE Connect ...")
    # Wait for a connection ...
    dotcount = 0
    while not bluefruit.connected:
        print(".", end="")
        dotcount = (dotcount + 1) % 80
        if dotcount == 79: