def read(self, SIO):
if not self.bme680:
i2c = busio.I2C(board.SCL, board.SDA)
self.bme680 = adafruit_bme680.Adafruit_BME680_I2C(i2c)
self.bme680.temperature_oversample = 16
self.bme680.pressure_oversample = 16
self.bme680.humidity_oversampe = 16
try:
T = self.bme680.temperature
RH = self.bme680.humidity
P = self.bme680.pressure
VOC = 1000. / self.bme680.gas
except:
traceback.print_exc()
self.bme680 = None
return
self.t = time.time()
print("BME680 at t =", self.t, ":\n\t", "%.3f C\n\t" % T,
"%.3f mbar\n\t" % P, "%.2f %% humidity\n\t" % RH,
"%.3g millimho VOC\n" % VOC)
SIO.log_readout(self.T_id, T, self.t)
SIO.log_readout(self.P_id, P, self.t)
SIO.log_readout(self.RH_id, RH, self.t)
SIO.log_readout(self.VOC_id, VOC, self.t)
def get_data():
i2c = busio.I2C(
board.SCL,
board.SDA) # Erstellen eines Objektes zum Nutzen des I2C Busses
sensor = adafruit_bme680.Adafruit_BME680_I2C(
i2c) # Erstellen eines Objektes unseren Sensors inklusive der Daten
return sensor.humidity, sensor.pressure, sensor.temperature # Rueckgabe der aktuellen Sensordaten
def sensor_filt(selected_meas, filt_pts, filt_int):
"""filter the measured values"""
sensor_polls = []
for i in range(0, filt_pts):
try:
sensor = adafruit_bme680.Adafruit_BME680_I2C(i2c)
command = {
"temp": sensor.temperature,
"humidity": sensor.humidity,
"gas": sensor.gas,
"pressure": sensor.pressure
}
cur_poll = command[selected_meas]
except:
print("UNKNOWN: sensor polling error")
sys.exit(3)
sensor_polls.append(cur_poll)
sensor = None
time.sleep(filt_int) # sleep for input number of seconds
filt_val = statistics.median(sensor_polls)
return filt_val, sensor_polls
def __init__(self):
"""
connects to bme680 sensor via I2C
"""
# load bme settings
self.i2c = I2C(board.SCL, board.SDA)
self.bme680 = adabme.Adafruit_BME680_I2C(self.i2c, debug=False)
self.bme680.sea_level_pressure = 978.33 #estimated pressure of germany
self.ErrorMsg = False
def __init__(self, i2c: I2C, config: Config):
super().__init__(self.__class__.__name__, config)
try:
self.i2c = i2c
self.sensor = adafruit_bme680.Adafruit_BME680_I2C(self.i2c)
self.sensor.sea_level_pressure = self.config.pressure
self.enabled = True
except:
self.enabled = False
def init():
"""
init bme680 sensor via I2C
:return:
"""
global bme680
i2c = I2C(board.SCL, board.SDA)
bme680 = adabme.Adafruit_BME680_I2C(i2c, debug=False)
bme680.sea_level_pressure = 953.25
def init():
global i2c
global sensor
global start_time
i2c = busio.I2C(board.SCL, board.SDA)
sensor = adafruit_bme680.Adafruit_BME680_I2C(i2c)
start_time = time.time()
sensor.sea_level_pressure = 1013.25 # Avg sea-level pressure
return sensor
def __init__(self):
#global i2c
#global bme680
# Create library object using our Bus I2C port
self._i2c = I2C(board.SCL, board.SDA)
self._bme680 = adafruit_bme680.Adafruit_BME680_I2C(self._i2c)
# change this to match the location's pressure (hPa) at sea level
self._bme680.sea_level_pressure = 1013.25
def __init__(self,
i2c_bus,
name="sns_thg",
interval=SENSOR_UPDATE_INTERVAL,
*args,
**kwargs):
Device.__init__(self, name=name, interval=interval, *args, **kwargs)
import adafruit_bme680
self.sensor = adafruit_bme680.Adafruit_BME680_I2C(i2c_bus)
def init(self):
""" Connect to the device """
self.i2c = I2C(board.SCL, board.SDA)
self._sensor = adafruit_bme680.Adafruit_BME680_I2C(
self.i2c, address=self.config['address'], debug=False)
# Change this to match the location's pressure (hPa) at sea level
self._sensor.sea_level_pressure = self.config.get(
'calibration_pressure', 1013.25)
return True
def bme680_data():
i2c = I2C(board.SCL, board.SDA)
bme680 = adafruit_bme680.Adafruit_BME680_I2C(i2c)
return {
'temperature': bme680.temperature,
'gas': bme680.gas,
'humidity': bme680.humidity,
'pressure': bme680.pressure,
'altitude': bme680.altitude
}
def __init__(self, feed_name):
self.feed_name = feed_name
# Create library object using our Bus I2C port
self.i2c = I2C(board.SCL, board.SDA)
self.bme680 = adafruit_bme680.Adafruit_BME680_I2C(self.i2c,
debug=False)
# change this to match the location's pressure (hPa) at sea level
self.bme680.sea_level_pressure = 1013.25 # Raleigh value
def show_air_readings(air_temp, air_gas, air_humid, air_pressure):
bme680 = adafruit_bme680.Adafruit_BME680_I2C(i2c, debug=False)
# change this to match the location's pressure (hPa) at sea level
bme680.sea_level_pressure = 1013.25
air_temp = bme680.temperature
air_gas = bme680.gas
air_humid = bme680.humidity
air_pressure = bme680.pressure
return(air_temp, air_gas, air_humid, air_pressure)
class bme680:
_i2c = busio.I2C(board.SCL, board.SDA)
_sensor = adafruit_bme680.Adafruit_BME680_I2C(_i2c)
POST_URL = "http://127.0.0.1:5000/api/v1/bme680/{}".format(ESP8266_ID)
@classmethod
def get_reading(cls):
return {
"tempature": cls._sensor.temperature,
"gas": cls._sensor.gas,
"humidity": cls._sensor.humidity,
"pressure": cls._sensor.pressure,
}
def bme680():
print(colored("BME680 started. . .", 'green'))
bme680 = adafruit_bme680.Adafruit_BME680_I2C(i2c, debug=False)
bme680.sea_level_pressure = 101325 / 100
gas_baseline, hum_baseline, hum_weighting = gas_warmup(bme680, 0)
while True:
temp = round(bme680.temperature, 2)
humidity = round(bme680.humidity, 2)
pressure = round(bme680.pressure, 2)
altitude = round(bme680.altitude, 2)
with lock:
database.create_record(conn, "Measurements", ("temp", temp))
# client.publish("greenhouse/temperature", temp)
database.create_record(conn, "Measurements", ("humidity", humidity))
# client.publish("greenhouse/humidity", humidity)
database.create_record(conn, "Measurements", ("pressure", pressure))
# client.publish("greenhouse/pressure", pressure)
database.create_record(conn, "Measurements", ("altitude", altitude))
# client.publish("greenhouse/altitude", altitude)
gas = bme680.gas
gas_offset = gas_baseline - gas
hum = humidity
hum_offset = hum - hum_baseline
# Calculate hum_score as the distance from the hum_baseline.
if hum_offset > 0:
hum_score = (100 - hum_baseline - hum_offset)
hum_score /= (100 - hum_baseline)
hum_score *= (hum_weighting * 100)
else:
hum_score = (hum_baseline + hum_offset)
hum_score /= hum_baseline
hum_score *= (hum_weighting * 100)
# Calculate gas_score as the distance from the gas_baseline.
if gas_offset > 0:
gas_score = (gas / gas_baseline)
gas_score *= (100 - (hum_weighting * 100))
else:
gas_score = 100 - (hum_weighting * 100)
# Calculate air_quality_score.
air_quality_score = round(hum_score + gas_score, 2)
with lock:
database.create_record(conn, "Measurements", ("gas", air_quality_score))
# client.publish("greenhouse/gas", air_quality_score)
# print(temp, "°C, ", hum, "%, ", pressure, "hPa, ", altitude, "m, ", air_quality_score)
time.sleep(measurement_interval)
def initialize(self):
import adafruit_bme680
from adafruit_extended_bus import ExtendedI2C
self.sensor = adafruit_bme680.Adafruit_BME680_I2C(
ExtendedI2C(self.input_dev.i2c_bus),
address=int(str(self.input_dev.i2c_location), 16))
# Set oversampling settings (can be tweaked to balance accuracy and noise in data
self.sensor.humidity_oversample = int(self.humidity_oversample)
self.sensor.temperature_oversample = int(self.temperature_oversample)
self.sensor.pressure_oversample = int(self.pressure_oversample)
self.sensor.filter_size = int(self.iir_filter)
self.sensor.sea_level_pressure = self.sea_level_pressure_ha
def get_sensor_values_function(sensor_str):
# print ('sensor_str =', sensor_str)
if False:
pass
# elif sensor_str == 'DHT22':
# import Adafruit_DHT
# DHT_TYPE = Adafruit_DHT.DHT22
# DHT_PIN = sys.argv[3]
# return Adafruit_DHT.read_retry
# DHT11, DHT22
# pip3 install Adafruit-DHT
elif sensor_str == 'BME280':
import adafruit_bme280
i2c = busio.I2C(board.SCL, board.SDA)
bme280 = adafruit_bme280.Adafruit_BME280_I2C(i2c, address=0x76)
bme280.sea_level_pressure = 1013.25
def get_bme280_values():
vals = (bme280.temperature,
bme280.relative_humidity,
bme280.pressure,
bme280.altitude)
# print (vals)
return vals
return get_bme280_values # KEINE KLAMMERN! => Funktion wird zurückgegeben !
elif sensor_str == 'BME680':
import adafruit_bme680
i2c = busio.I2C(board.SCL, board.SDA)
# print ('i2c = ', i2c)
bme680 = adafruit_bme680.Adafruit_BME680_I2C(i2c, debug=False, address=0x76)
# bme680 = adafruit_bme680.Adafruit_BME680_I2C(i2c, debug=False)
bme680.sea_level_pressure = 1013.25
def get_bme680_values():
vals = (bme680.temperature,
bme680.relative_humidity,
bme680.pressure,
bme680.altitude,
bme680.gas)
# print (vals)
return vals
return get_bme680_values # KEINE KLAMMERN! => Funktion wird zurückgegeben !
else:
raise ValueError("\ndef get_sensor_values: Keine Sensorfunktion gefunden \n")
return
def update_obd_values(times, temp_vals, gas_vals, hum_vals, pres_vals):
i2c = busio.I2C(board.SCL, board.SDA)
sensor = adafruit_bme680.Adafruit_BME680_I2C(i2c)
times.append(time.time())
temp_vals.append(sensor.temperature)
gas_vals.append(sensor.gas)
hum_vals.append(sensor.humidity)
pres_vals.append(sensor.pressure)
tot_time.append(times[-1])
tot_temp.append(temp_vals[-1])
tot_gas.append(gas_vals[-1])
tot_hum.append(hum_vals[-1])
tot_pres.append(pres_vals[-1])
return times, temp_vals, gas_vals, hum_vals, pres_vals
def enable(self):
# Use virtual to test iot functionality on computers without busio / sensors.
if not self.island.virtual and not hasattr(self, 'bme680'):
from busio import I2C
import adafruit_bme680
import board
# Create library object using our Bus I2C port
i2c = I2C(board.SCL, board.SDA)
self.bme680 = adafruit_bme680.Adafruit_BME680_I2C(i2c, debug=False)
# change this to match the location's pressure (hPa) at sea level
# this could be dynamically updated from, e.g.,
# https://forecast.weather.gov/MapClick.php?x=266&y=134&site=sew&zmx=&zmy=&map_x=266&mapy=134#.X2jtB2hKiUk
self.bme680.sea_level_pressure = 1013.89
# Start the scheduled work
self.schedule(self.publishResults, 60)
def __init__(self, interval=0, temp_in_f=False, pressure_in_inches=False):
"""
```
interval
How long in seconds to sleep between returning records.
temp_in_f
Return temperature in Farenheit
pressure_in_inches
Return pressure in inches of mercury
```
"""
self.interval = interval # seconds between records
self.temp_in_f = temp_in_f
self.pressure_in_inches = pressure_in_inches
self.last_record = 0 # timestamp at our last record
# Create sensor object, communicating over the board's default I2C bus
self.i2c = board.I2C() # uses board.SCL and board.SDA
self.bme680 = adafruit_bme680.Adafruit_BME680_I2C(self.i2c)
def Read_data():
ts = time.strftime("%H%M%S")
file.write(str(ts) + "\t")
# Fusion / Gyroscope data
x, y, z = imu.getFusionData()
x = round(math.degrees(x),2)
y = round(math.degrees(y),2)
z = round(math.degrees(z),2)
file.write(str(x) + "\t"+ str(y) + "\t" + str(z)+ "\t")
#resetfusion
imu.getGyro
# Acceleration data, accely is spin, accelz is acceleration,
accelx, accely, accelz = imu.getAccel()
accelx = round(accelx,2)
accely = round(accely,2)
accelz = round(accelz,2)
file.write(str(accelx) + "\t" + str(accely) + "\t" + str(accelz) + "\t" )
# Compass data
compx, compy, compz = imu.getIMUData()['compass']
compx = round(compx,2)
compy = round(compy,2)
compz = round(compz,2)
file.write(str(compx) + "\t" + str(compy) + "\t" + str(compz) + "\t")
#time.sleep(poll_interval*1.0/1000.0)
i2c = busio.I2C(board.SCL, board.SDA)
bme680 = adafruit_bme680.Adafruit_BME680_I2C(i2c)
bme680.sea_level_pressure = 1018
temp = bme680.temperature
humidity = bme680.humidity
altitude = bme680.altitude
pressure = bme680.pressure
gas = bme680.gas
file.write(str(temp) + "\t" + str(humidity) + "\t" + str(altitude) + "\t" + str(pressure) + '\t' + str(gas) + "\t")
mcp = adafruit_mcp9808.MCP9808(i2c)
ptemp = mcp.temperature #deg celsius
file.write(str(ptemp) + "\t")
def __init__(self, use_sps30=True, use_bme680=True):
self.use_sps30 = use_sps30
self.use_bme680 = use_bme680
if self.use_bme680:
i2c = I2C(board.SCL, board.SDA)
self.bme680 = adafruit_bme680.Adafruit_BME680_I2C(i2c, debug=False)
self.bme680.sea_level_pressure = 1013.25
else:
self.bme680 = None
if self.use_sps30:
self.sps30 = SPS30()
self.sps30.readArticleCode() or exit(1)
self.sps30.reset()
time.sleep(0.1) # note: needed after reset
self.sps30.readSerialNr()
self.sps30.readCleaningInterval()
self.sps30.initialize()
def run(ctx, param, value):
if not value or ctx.resilient_parsing:
return
click.secho('Start running the AzatAI Techno Console:', fg='green')
click.secho("AzatAI Techno Console Started!", fg='green')
click.secho("Please Press Cntrl + Z to stop! \n WARN: Running code too much time may cause hardware problem!",
fg='yellow')
click.secho('INFO: The default see level pressure is: 1013.25', fg='blue')
while True:
i2c = I2C(SCL, SDA)
orientation_sensor = adafruit_bno055.BNO055(i2c)
light_sensor = SI1145.SI1145()
gc.collect()
bme680 = adafruit_bme680.Adafruit_BME680_I2C(i2c)
# change this to match the location's pressure (hPa) at sea level
bme680.sea_level_pressure = 1013.25
print(time.strftime("%Y-%m-%d %H:%M:%S", time.localtime()))
click.secho('BME680:', fg='blue')
print("\nTemperature: %0.1f C" % bme680.temperature)
print("Gas: %d ohm" % bme680.gas)
print("Humidity: %0.1f %%" % bme680.humidity)
print("Pressure: %0.3f hPa" % bme680.pressure)
print("Altitude = %0.2f meters" % bme680.altitude)
click.secho('BNO055', fg='blue')
print(orientation_sensor.temperature)
print(orientation_sensor.euler)
print(orientation_sensor.gravity)
click.secho('SI1145', fg='blue')
vis = light_sensor.readVisible()
_IR = light_sensor.readIR()
_UV = light_sensor.readUV()
uvindex = _UV / 100.0
print('Vis:'+str(vis))
print("IR"+str(_IR))
print("UV Index"+str(uvindex))
time.sleep(3)
ctx.exit()
# Import Dependencies
import sqlite3
import time
import board
from busio import I2C
import adafruit_bme680
import datetime
# Create library object using our Bus I2C port
i2c = I2C(board.SCL, board.SDA)
bme680 = adafruit_bme680.Adafruit_BME680_I2C(i2c, debug=False)
# change this to match the location's pressure (hPa) at sea level
bme680.sea_level_pressure = 1013.25
# Define database name to which data will be stored
dbname = 'Sensors.db'
# Using while loop capture the data in variables and store it in database
while True:
# Create the now variable to capture the current moment
now = datetime.datetime.now()
TEMPERATURE = round(bme680.temperature, 1)
GAS = round(bme680.gas, 1)
HUMIDITY = round(bme680.humidity, 1)
PRESSURE = round(bme680.pressure, 1)
ALTITUDE = round(bme680.altitude, 1)
TIME_STAMP = (now)
conn = sqlite3.connect(dbname)
curs = conn.cursor()
curs.execute(
"INSERT INTO BME_DATA (TIME_STAMP, TEMPERATURE, GAS, HUMIDITY, PRESSURE, ALTITUDE) values(?,?,?,?,?,?)",
(TIME_STAMP, TEMPERATURE, GAS, HUMIDITY, PRESSURE, ALTITUDE))
conn.commit()
def __init__(self):
self.i2c = busio.I2C(board.SCL, board.SDA)
self.sensor = adafruit_bme680.Adafruit_BME680_I2C(self.i2c)
print("BME680 I2C initialized!")
self.read_data()
# # Valid I2C ports: ((3, 3, 2), (1, 3, 2), (0, 1, 0))
# # i2c = I2C(6, 70)
# print(board.SCL)
# print(board.SDA)
i2c = I2C(board.SCL, board.SDA)
# Lock the I2C device before we try to scan
while not i2c.try_lock():
pass
# Print the addresses found once
print("I2C addresses found:",
[hex(device_address) for device_address in i2c.scan()])
# Unlock I2C now that we're done scanning.
i2c.unlock()
print(i2c._i2c.__dict__)
bme680 = adafruit_bme680.Adafruit_BME680_I2C(i2c)
# change this to match the location's pressure (hPa) at sea level
bme680.sea_level_pressure = 1013.25
while True:
print("\nTemperature: %0.1f C" % bme680.temperature)
print("Gas: %d ohm" % bme680.gas)
print("Humidity: %0.1f %%" % bme680.humidity)
print("Pressure: %0.3f hPa" % bme680.pressure)
print("Altitude = %0.2f meters" % bme680.altitude)
time.sleep(2)
def configure_bme680():
i2c = board.I2C()
return adafruit_bme680.Adafruit_BME680_I2C(i2c) # address=int(0x77)
# Create an instance of the REST client.
aio = Client(ADAFRUIT_IO_USERNAME, ADAFRUIT_IO_KEY)
# Set up Adafruit IO Feeds.
temperature_feed = aio.feeds('temperature')
humidity_feed = aio.feeds('humidity')
pressure_feed = aio.feeds('pressure')
#TODO: altitude_feed = aio.feeds('altitude')
gas_feed = aio.feeds('gas')
# setup environment sensor
# Set up BME680 Sensor at I2C
i2c = I2C(board.SCL, board.SDA)
BME680_I2CADDRESS = 0x77 # BME280: 0x76
env_sensor = adafruit_bme680.Adafruit_BME680_I2C(i2c, BME680_I2CADDRESS)
def calibrate(value):
print(f"... BME680 sensor calibrating for sea level pressure: {value}")
env_sensor.sea_level_pressure = value
assert env_sensor.sea_level_pressure == value
"""
location's pressure (hPa) at sea level from:
https://www.weatheronline.co.uk/weather/maps/current?LANG=en&CONT=euro®ION=0003&LAND=NL&LEVEL=4&R=310&CEL=C&ART=tabelle&TYP=druck
The value changes the Alt-value!
I use 'Amsterdam/Schiphol' sea level value
"""
calibrate(1025) # 10 Nov 2020 19:00
from secrets import secrets
import wifi
RED = (16, 0, 0)
GREEN = (0, 16, 0)
pixel = neopixel.NeoPixel(board.NEOPIXEL_POWER, 1, auto_write=True)
pixel.fill(GREEN)
pixel.show()
pixels = neopixel.NeoPixel(board.NEOPIXEL, 4, auto_write=True)
pixels.fill(GREEN)
pixels.show()
print('Setting up sensors')
i2c = busio.I2C(board.SCL, board.SDA)
bme680_sensor = adafruit_bme680.Adafruit_BME680_I2C(i2c)
sgp30_sensor = adafruit_sgp30.Adafruit_SGP30(i2c)
print('Setting up display')
display = board.DISPLAY
group = displayio.Group(max_size=20)
# background
rect1 = Rect(0, 0, 199, 90, fill=0xFFFFFF)
rect2 = Rect(200, 0, 296, 90, fill=0xBBBBBB)
rect3 = Rect(0, 91, 296, 128, fill=0x444444)
# Create fonts
print("Loading fonts")
big_font = bitmap_font.load_font("/Exo-Bold-42.bdf")
medium_font = bitmap_font.load_font("/Exo-SemiBold-18.bdf")
import time
import board
from busio import I2C
import adafruit_bme680
# Create library object using our Bus I2C port
i2c = I2C(board.SCL, board.SDA)
bme680 = adafruit_bme680.Adafruit_BME680_I2C(i2c, address=118, debug=False)
# change this to match the location's pressure (hPa) at sea level
bme680.sea_level_pressure = 1013.25
while True:
print("\nTemperature: %0.1f C" % bme680.temperature)
print("Gas: %d ohm" % bme680.gas)
print("Humidity: %0.1f %%" % bme680.humidity)
print("Pressure: %0.3f hPa" % bme680.pressure)
print("Altitude = %0.2f meters" % bme680.altitude)
time.sleep(1)