def testPlutoADC(self):
# See if we can get non-zero data from Pluto
sdr = Pluto()
data = sdr.rx()
s = np.sum(np.abs(data))
del sdr
self.assertGreater(s, 0, "check non-zero data")
def testPlutoCyclicBuffersException(self):
sdr = Pluto()
fs = int(sdr.sample_rate)
fc = -3000000
N = 1024
ts = 1 / float(fs)
t = np.arange(0, N * ts, ts)
i = np.cos(2 * np.pi * t * fc) * 2**14
q = np.sin(2 * np.pi * t * fc) * 2**14
iq = i + 1j * q
sdr.tx_cyclic_buffer = True
try:
sdr.tx(iq)
sdr.tx(iq)
except Exception as e:
if ("TX buffer has been submitted in cyclic mode. \
To push more data the tx buffer must be destroyed first."
not in str(e)):
fail = True
msg = "Wrong exception raised, message was: " + str(e)
else:
fail = False
else:
fail = True
msg = "ExpectedException not raised"
# Cleanly end
del sdr
if fail:
self.fail(msg)
def testPlutoCyclicBuffers(self):
sdr = Pluto()
fs = int(sdr.sample_rate)
fc = -3000000
N = 1024
ts = 1 / float(fs)
t = np.arange(0, N * ts, ts)
i = np.cos(2 * np.pi * t * fc) * 2**14
q = np.sin(2 * np.pi * t * fc) * 2**14
iq = i + 1j * q
sdr.tx_cyclic_buffer = True
sdr.tx(iq)
sdr.tx_destroy_buffer()
sdr.tx(iq)
def testPlutoDMA(self):
# Test DMA
sdr = Pluto()
sdr.loopback = 1
sdr.tx_cyclic_buffer = True
# Create a ramp signal with different values for I and Q
start = 0
tx_data = np.array(range(start, 2**11), dtype=np.int16)
tx_data = tx_data << 4
tx_data = tx_data + 1j * (tx_data * -1 - 1)
sdr.rx_buffer_size = len(tx_data) * 2
sdr.tx(tx_data)
# Flush buffers
for _ in range(100):
data = sdr.rx()
# Turn off loopback (for other tests)
sdr.loopback = 0
del sdr
# Check data
offset = 0
for i in range(len(data)):
if np.real(data[i]) == start:
for d in range(len(tx_data)):
# print(str(data[i+offset])+" "+str(d+start))
self.assertEqual(
np.real(data[i + offset]),
d + start,
"Loopback validation failed for I",
)
self.assertEqual(
np.imag(data[i + offset]),
(d + start) * -1 - 1,
"Loopback validation failed for Q",
)
offset = offset + 1
break
def testPlutoDDS(self):
# See if we can tone from Pluto using DMAs
sdr = Pluto()
sdr.tx_lo = 1000000000
sdr.rx_lo = 1000000000
sdr.tx_cyclic_buffer = True
sdr.tx_hardwaregain = -30
sdr.gain_control_mode = "slow_attack"
sdr.rx_buffer_size = 2 ** 20
sdr.sample_rate = 4000000
sdr.loopback = 1
# Create a sinewave waveform
RXFS = int(sdr.sample_rate)
sdr.dds_enabled = [1, 1, 1, 1]
fc = 2000
sdr.dds_frequencies = [fc, 0, fc, 0]
sdr.dds_scales = [1, 0, 1, 0]
sdr.dds_phases = [90000, 0, 0, 0]
# Pass through SDR
for _ in range(5):
data = sdr.rx()
# Turn off loopback (for other tests)
sdr.loopback = 0
tone_freq = self.freq_est(data, RXFS)
# if self.do_plots:
# import matplotlib.pyplot as plt
#
# reals = np.real(data)
# plt.plot(reals)
# imags = np.imag(data)
# plt.plot(imags)
# plt.xlabel("Samples")
# plt.ylabel("Amplitude [dbFS]")
# plt.show()
diff = np.abs(tone_freq - fc)
self.assertGreater(fc * 0.01, diff, "Frequency offset")
