def loadSchedules():
"""load schedules from config file"""
global allSchedules, timeSchedules
#create members
allSchedules = SortedCollection([], itemgetter(0))
timeSchedules = SortedCollection([], itemgetter(0))
#get schedules from confif file
schedules = agoclient.getConfigOption("agoscheduler", "all", "[]")
schedules = json.loads(schedules)
#and store them in sorted collection
for schedule in schedules:
addSchedule(schedule)
logging.info('Loaded %d schedules' % len(allSchedules))
def loadSchedules():
"""load schedules from config file"""
global allSchedules, timeSchedules
#create members
allSchedules = SortedCollection([], itemgetter(0))
timeSchedules = SortedCollection([], itemgetter(0))
#get schedules from confif file
schedules = agoclient.getConfigOption("agoscheduler", "all", "[]")
schedules = json.loads(schedules)
#and store them in sorted collection
for schedule in schedules:
addSchedule(schedule)
logging.info('Loaded %d schedules' % len(allSchedules))
# devicename=androidphone,iphone
# wait_time=15
# check_time=15
#
# *NOTE* First phone address (MAC Address) matches first devicename, second matches second, etc
# wait_time is the maximum time (minutes) a device can be inactive before being marked as away
# check_time is the time (seconds) between each check
import agoclient
import threading
import time
import os
import sys
readPhoneaddress = agoclient.getConfigOption("wifi_device_detect","phoneaddress","00:00:00:00:00:00, FF:FF:FF:FF:FF:FF")
phoneaddress = map(str, readPhoneaddress.split(','))
readDevicename = agoclient.getConfigOption("wifi_device_detect","devicename","androidphone, iphone")
devicename = map(str, readDevicename.split(','))
client = agoclient.AgoConnection("Wifi_Device_Detect")
for name in devicename:
client.addDevice(name, "binarysensor")
wifidevices = dict(zip(phoneaddress, devicename))
last_seen = {}
for address in phoneaddress:
last_seen[address] = 0
urllib2.install_opener(opener)
u = urllib2.urlopen(url)
else:
u = urllib2.urlopen(url)
buffer = u.read()
result["image"] = base64.b64encode(buffer)
result["result"] = 0;
except urllib2.URLError, e:
print ('Error opening URL %s' % (url) + ' - Reason: ' + e.reason)
return result
client.addHandler(messageHandler)
devicelist=agoclient.getConfigOption("webcam", "devices", "")
try:
devices = map(str, devicelist.split(','))
except:
print "error reading device list"
else:
for device in devices:
print "announcing device", device
if "rtsp://" in device:
client.addDevice(device, "onvifnvt")
else:
client.addDevice(device, "camera")
client.run()
# Squeezebox client
#
# copyright (c) 2013 James Roberts <*****@*****.**>
# Using agoclient sample code as guidance!
import agoclient
import squeezeboxserver
import threading
import time
client = agoclient.AgoConnection("squeezebox")
# if you need to fetch any settings from config.ini, use the getConfigOption call. The first parameter is the section name in the file (should be yor instance name)
# the second one is the parameter name, and the third one is the default value for the case when nothing is set in the config.ini
server = agoclient.getConfigOption("squeezebox", "server", "127.0.0.1:9000")
print "Server: " + server
squeezebox = squeezeboxserver.SqueezeboxServer(server)
# the messageHandler method will be called by the client library when a message comes in that is destined for one of the child devices you're handling
# the first parameter is your internal id (all the mapping from ago control uuids to the internal ids is handled transparently for you)
# the second parameter is a dict with the message content
def messageHandler(internalid, content):
if "command" in content:
if content["command"] == "on":
print "switching on: " + internalid
squeezebox.power(internalid, content["command"])
# change=0.2 # temperature change between reports
#
import agoclient
import threading
import time
import os
import sys
import syslog
os.system('modprobe w1-gpio')
os.system('modprobe w1-therm')
client = agoclient.AgoConnection("raspi1wGPIO")
readInterval = agoclient.getConfigOption("raspi1wGPIO", "interval", "600")
interval = int(readInterval)
change = float(agoclient.getConfigOption("raspi1wGPIO", "change", "0.2"))
try:
readDevices = (line.rstrip('\n') for line in open('/sys/bus/w1/devices/w1_bus_master1/w1_master_slaves'))
except IOError:
syslog.syslog(syslog.LOG_ERR, 'No devices exiting')
sys.exit()
devices = []
sensordata = {}
client.emitEvent(internalid, "event.device.statechanged", "255",
"")
if content["command"] == "off":
print "switching off: " + internalid
client.emitEvent(internalid, "event.device.statechanged", "0", "")
# specify our message handler method
client.addHandler(messageHandler)
# if you need to fetch any settings from config.ini, use the getConfigOption call. The first parameter is the section name in the file (should be yor instance name)
# the second one is the parameter name, and the third one is the default value for the case when nothing is set in the config.ini
print agoclient.getConfigOption("example", "parameter", "0")
# of course you need to tell the client library about the devices you provide. The addDevice call expects a internal id and a device type (you can find all valid types
# in the schema.yaml configuration file). The internal id is whatever you're using in your code to distinct your devices. Or the pin number of some GPIO output. Or
# the IP of a networked device. Whatever fits your device specific stuff. The persistent translation to a ago control uuid will be done by the client library. The
# mapping is stored as a json file in /etc/opt/agocontrol/uuidmap/<instance name>.json
# you don't need to worry at all about this, when the messageHandler is called, you'll be passed the internalid for the device that you did specifiy when using addDevice()
# we add a switch and a dimmer
client.addDevice("123", "dimmer")
client.addDevice("124", "switch")
# for our threading example in the next section we also add a binary sensor:
client.addDevice("125", "binarysensor")
# then we add a background thread. This is not required and just shows how to send events from a separate thread. This might be handy when you have to poll something
# in the background or need to handle some other communication. If you don't need one or if you want to keep things simple at the moment just skip this section.
#
# Create /etc/opt/agocontrol/conf.d/weather.conf
# [weather]
# locations_ID=ITLM2916
# tempunits = f
# waittime = 30
#
import agoclient
import time
import threading
import pywapi
import string
import time
readID = agoclient.getConfigOption("weather","locations_ID","90210")
readTempUnits = agoclient.getConfigOption("weather","tempunits","f")
readWaitTime = int(agoclient.getConfigOption("weather","waittime","300"))
rain = "rain"
ex_temp = "ex_temp"
ex_umidity = "ex_umidity"
client = agoclient.AgoConnection("Weather")
client.addDevice(rain, "binarysensor")
client.addDevice(ex_temp, "temperaturesensor")
client.addDevice(ex_umidity, "multilevelsensor")
class testEvent(threading.Thread):
def __init__(self,):
threading.Thread.__init__(self)
client.emitEvent(internalid, "event.device.statechanged", str(STATE_OFF),
"")
def emit_stream(internalid):
client.emitEvent(internalid, "event.device.mediastatechanged",
str(STATE_STREAM), "")
#init
try:
#connect agoclient
client = agoclient.AgoConnection("squeezebox")
#read configuration
host = agoclient.getConfigOption("squeezebox", "host", "127.0.0.1")
port = int(agoclient.getConfigOption("squeezebox", "port", "9090"))
login = agoclient.getConfigOption("squeezebox", "login", "")
passwd = agoclient.getConfigOption("squeezebox", "password", "")
logging.info("Config: %s@%s:%d" % (login, host, port))
#connect to squeezebox server
logging.info('Creating LMSServer...')
server = pylmsserver.LMSServer(host, port, login, passwd)
server.connect()
#connect to notifications server
logging.info('Creating LMSPlaylist...')
library = pylmslibrary.LMSLibrary(host, port, login, passwd)
playlist = pylmsplaylist.LMSPlaylist(library, host, port, login, passwd)
#play, pause, stop, on, off, add, del, move, reload
# tempF = 9.0/5.0 * tempC + 32.0
# client.emitEvent(str(devId), "event.environment.temperaturechanged", tempF, "degF")
# else:
# client.emitEvent(str(devId), "event.environment.temperaturechanged", tempC, "degC")
if "humidity" in model and dataType & t.TELLSTICK_HUMIDITY == t.TELLSTICK_HUMIDITY:
emitHumidityChanged(devId, float(value))
#client.emitEvent(str(devId), "event.environment.humiditychanged", float(value), "%")
info("+------------------------------------------------------------")
info("+ Tellstick.py startup. Version=" + AGO_TELLSTICK_VERSION)
info("+------------------------------------------------------------")
client = agoclient.AgoConnection("tellstick")
#device = (agoclient.getConfigOption("tellstick", "device", "/dev/usbxxxx")
if (agoclient.getConfigOption("tellstick", "debug",
"false").lower() == "true"):
debug = True
config = ConfigObj("/etc/opt/agocontrol/conf.d/tellstick.conf")
#config = ConfigObj("./tellstick.conf")
try:
general_delay = float(config['EventDevices']['Delay']) / 1000
except:
general_delay = 0.5
#section = config['EventDevices']
SensorPollDelay = 300.0 # 5 minutes
try:
if 'SensorPollDelay' in config['tellstick']:
SensorPollDelay = config['tellstick']['SensorPollDelay']
except KeyError:
client.emitEvent(internalid, "event.mediaplayer.statechanged", "pause", "")
client.emitEvent(internalid, "event.device.mediastatechanged", str(STATE_PAUSE), "")
def emit_on(internalid):
client.emitEvent(internalid, "event.device.statechanged", str(STATE_ON), "")
def emit_off(internalid):
client.emitEvent(internalid, "event.device.statechanged", str(STATE_OFF), "")
def emit_stream(internalid):
client.emitEvent(internalid, "event.device.mediastatechanged", str(STATE_STREAM), "")
#init
try:
#connect agoclient
client = agoclient.AgoConnection("squeezebox")
#read configuration
host = agoclient.getConfigOption("squeezebox", "host", "127.0.0.1")
port = int(agoclient.getConfigOption("squeezebox", "port", "9090"))
login = agoclient.getConfigOption("squeezebox", "login", "")
passwd = agoclient.getConfigOption("squeezebox", "password", "")
logging.info("Config: %s@%s:%d" % (login, host, port))
#connect to squeezebox server
logging.info('Creating LMSServer...')
server = pylmsserver.LMSServer(host, port, login, passwd)
server.connect()
#connect to notifications server
logging.info('Creating LMSPlaylist...')
library = pylmslibrary.LMSLibrary(host, port, login, passwd)
playlist = pylmsplaylist.LMSPlaylist(library, host, port, login, passwd)
#play, pause, stop, on, off, add, del, move, reload
# interval=600
# change=0.1
#
import agoclient
import threading
import time
import subprocess
import re
import string
from time import gmtime, strftime
import RPi.GPIO as GPIO
client = agoclient.AgoConnection("raspiMCP3xxxGPIO")
SPIMOSI = int(agoclient.getConfigOption("raspiMCP3xxxGPIO", "SPIMOSI", "10"))
SPIMISO = int(agoclient.getConfigOption("raspiMCP3xxxGPIO", "SPIMISO", "9"))
SPICLK = int(agoclient.getConfigOption("raspiMCP3xxxGPIO", "SPICLK", "11"))
SPICS = int(agoclient.getConfigOption("raspiMCP3xxxGPIO", "SPICS", "8"))
vDiv = float(
agoclient.getConfigOption("raspiMCP3xxxGPIO", "voltage_divider", "1"))
readInputs = agoclient.getConfigOption("raspiMCP3xxxGPIO", "inputs", "0,1")
interval = int(agoclient.getConfigOption("raspiMCP3xxxGPIO", "interval", "60"))
change = float(agoclient.getConfigOption("raspiMCP3xxxGPIO", "change", "0.1"))
inputs = map(int, readInputs.split(','))
deviceconfig = {}
for adcCh in inputs:
deviceconfig[(adcCh, 'value')] = 0
import serial
import json
state = {"state": "", "AirTemperature": "", "AirHumidity": ""}
variables = {
"AirHumidity.low": "",
"AirHumidity.high": "",
"AirTemperature.low": "",
"AirTemperature.high": "",
"AirCircInterval": ""
}
sensors = {"AirTemperature": "", "AirHumidity": ""}
client = agoclient.AgoConnection("MushroomControl")
myport = agoclient.getConfigOption("MushroomControl", "device", "0")
s0 = serial.Serial(myport, 9600)
def inventory():
s0.write('{"content": {"command":"inventory"}}')
def messageHandler(internalid, content):
if "command" in content:
if content["command"] == "setvariable":
try:
myvalue = ""
if "templow" in content:
print "templow on " + internalid + " set to " + content[
# change=0.1
#
import agoclient
import threading
import time
import subprocess
import re
import string
from time import gmtime, strftime
import RPi.GPIO as GPIO
client = agoclient.AgoConnection("raspiMCP3xxxGPIO")
SPIMOSI = int(agoclient.getConfigOption("raspiMCP3xxxGPIO", "SPIMOSI", "10"))
SPIMISO = int(agoclient.getConfigOption("raspiMCP3xxxGPIO", "SPIMISO", "9"))
SPICLK = int(agoclient.getConfigOption("raspiMCP3xxxGPIO", "SPICLK", "11"))
SPICS = int(agoclient.getConfigOption("raspiMCP3xxxGPIO", "SPICS", "8"))
vDiv = float(agoclient.getConfigOption("raspiMCP3xxxGPIO", "voltage_divider", "1"))
readInputs = agoclient.getConfigOption("raspiMCP3xxxGPIO", "inputs", "0,1")
interval = int(agoclient.getConfigOption("raspiMCP3xxxGPIO", "interval", "60"))
change = float(agoclient.getConfigOption("raspiMCP3xxxGPIO", "change", "0.1"))
inputs = map(int, readInputs.split(','))
deviceconfig = {}
for adcCh in inputs:
deviceconfig[(adcCh, 'value')] = 0
deviceconfig[(adcCh, 'lastreporttime')] = time.time()
if tempC <> self.lastTempC:
self.lastTempC = tempC
if (TempUnits == 'f' or TempUnits == 'F'):
tempF = 9.0/5.0 * tempC + 32.0
client.emitEvent(devId, "event.environment.temperaturechanged", tempF, "degF")
else:
client.emitEvent(devId, "event.environment.temperaturechanged", tempC, "degC")
time.sleep (readWaitTime)
info( "+------------------------------------------------------------")
info( "+ temperaturnu.py startup. Version=" + AGO_TEMPERATURNU_VERSION)
info( "+------------------------------------------------------------")
client = agoclient.AgoConnection("temperaturnu")
if (agoclient.getConfigOption("temperaturnu", "debug", "false").lower() == "true"):
debug = True
lat = agoclient.getConfigOption("system","lat","0")
lon = agoclient.getConfigOption("system","lon","0")
mailadress = agoclient.getConfigOption("system","mailadress","none")
units = agoclient.getConfigOption("system","units","SI")
TempUnits = "C"
if units.lower() == "us":
TempUnits = "F"
readWaitTime = int(agoclient.getConfigOption("temperaturnu","waittime","300"))
if readWaitTime < 300: #Used to guarantie minumum 5 minutes between API calls
readWaitTime = 300
# tempF = 9.0/5.0 * tempC + 32.0
# client.emitEvent(str(devId), "event.environment.temperaturechanged", tempF, "degF")
# else:
# client.emitEvent(str(devId), "event.environment.temperaturechanged", tempC, "degC")
if "humidity" in model and dataType & t.TELLSTICK_HUMIDITY == t.TELLSTICK_HUMIDITY:
emitHumidityChanged(devId, float(value))
#client.emitEvent(str(devId), "event.environment.humiditychanged", float(value), "%")
info( "+------------------------------------------------------------")
info( "+ Tellstick.py startup. Version=" + AGO_TELLSTICK_VERSION)
info( "+------------------------------------------------------------")
client = agoclient.AgoConnection("tellstick")
#device = (agoclient.getConfigOption("tellstick", "device", "/dev/usbxxxx")
if (agoclient.getConfigOption("tellstick", "debug", "false").lower() == "true"):
debug = True
config = ConfigObj("/etc/opt/agocontrol/conf.d/tellstick.conf")
#config = ConfigObj("./tellstick.conf")
try:
general_delay = float(config['EventDevices']['Delay'])/1000
except:
general_delay = 0.5
#section = config['EventDevices']
SensorPollDelay = 300.0 # 5 minutes
try:
if 'SensorPollDelay' in config['tellstick']:
SensorPollDelay = config['tellstick']['SensorPollDelay']
except KeyError:
from pysnmp.entity.rfc3413.oneliner import cmdgen
from pysnmp.proto import rfc1902
import threading
import time
import agoclient
client = agoclient.AgoConnection("apc")
OIDOutletCount = "1,3,6,1,4,1,318,1,1,4,5,1,0" # sPDUOutletConfigTableSize
OIDStatus = "1,3,6,1,4,1,318,1,1,4,4,2,1,3" # sPDUOutletCtl
OIDName = "1,3,6,1,4,1,318,1,1,4,5,2,1,3" # sPDUOutletName
OIDLoad = "1,3,6,1,4,1,318,1,1,12,2,3,1,1,2,1" # rPDULoadStatusLoad
loadOID = (1, 3, 6, 1, 4, 1, 318, 1, 1, 12, 2, 3, 1, 1, 2, 1)
apchost = agoclient.getConfigOption("apc", "host", "192.168.1.13")
apcport = int(agoclient.getConfigOption("apc", "port", "161"))
apcvoltage = int(agoclient.getConfigOption("apc", "voltage", "220"))
apccommunityro = agoclient.getConfigOption("apc", "community_readonly",
"public")
apccommunityrw = agoclient.getConfigOption("apc", "community_readwrite",
"private")
# route stderr to syslog
class LogErr:
def write(self, data):
syslog.syslog(syslog.LOG_ERR, data)
syslog.openlog(sys.argv[0], syslog.LOG_PID, syslog.LOG_DAEMON)
#outputs=0
#
# Interface for security panels from INIM: http://www.inim.biz
#
# the terminals connected to the control unit can be up to 100
# the base unit without expansion has 10
#
import agoclient
import time
import threading
import serial
client = agoclient.AgoConnection("INIM")
port = agoclient.getConfigOption("INIM", "port", "/dev/ttyS0")
terminal = int(agoclient.getConfigOption("INIM", "terminal", "10"))
outputs = agoclient.getConfigOption("INIM", "outputs", "3")
# add devices for terminals
for i in range(terminal):
id = i + 1
client.addDevice("%d" % (id), "binarysensor")
ser = serial.Serial(port,
57600,
parity=serial.PARITY_EVEN,
stopbits=1,
timeout=1)
try:
mPowerDevice.SetDevice(internalid, 0)
except ValueError as e:
needs_connection = True
except URLError as e:
print "Device could not be reached due to %s" % (e.reason)
print "Needs reconnect ..."
needs_connection = True
# specify our message handler method
client.addHandler(messageHandler)
# get config parameters
host = agoclient.getConfigOption("mPower", "host", "127.0.0.1")
username = agoclient.getConfigOption("mPower", "username", "ubnt")
password = agoclient.getConfigOption("mPower", "password", "ubnt")
# initial call to mPower device
mPowerDevice = pyubnt.Device(host, username, password)
# add the devices of the mPower
content = mPowerDevice.GetDevices()
i = 1
for item in content["value"]:
if "relay" in item:
client.addDevice(str(i), "switch")
i = i + 1
from pysnmp.entity.rfc3413.oneliner import cmdgen
from pysnmp.proto import rfc1902
import threading
import time
import agoclient
client = agoclient.AgoConnection("apc")
OIDOutletCount = "1,3,6,1,4,1,318,1,1,4,5,1,0" # sPDUOutletConfigTableSize
OIDStatus = "1,3,6,1,4,1,318,1,1,4,4,2,1,3" # sPDUOutletCtl
OIDName = "1,3,6,1,4,1,318,1,1,4,5,2,1,3" # sPDUOutletName
OIDLoad = "1,3,6,1,4,1,318,1,1,12,2,3,1,1,2,1" # rPDULoadStatusLoad
loadOID = (1,3,6,1,4,1,318,1,1,12,2,3,1,1,2,1)
apchost = agoclient.getConfigOption("apc", "host", "192.168.1.13")
apcport = int(agoclient.getConfigOption("apc", "port", "161") )
apcvoltage = int(agoclient.getConfigOption("apc", "voltage", "220") )
apccommunityro = agoclient.getConfigOption("apc", "community_readonly", "public")
apccommunityrw = agoclient.getConfigOption("apc", "community_readwrite", "private")
# route stderr to syslog
class LogErr:
def write(self, data):
syslog.syslog(syslog.LOG_ERR, data)
syslog.openlog(sys.argv[0], syslog.LOG_PID, syslog.LOG_DAEMON)
# sys.stderr = LogErr()
#!/usr/bin/python
import agoclient
import threading
import time
import logging
readInterface = agoclient.getConfigOption("x10","interface","CM11")
readPort = agoclient.getConfigOption("x10", "device", "/dev/ttyUSB1")
if (readInterface == "CM11"):
from x10.controllers.cm11 import CM11
dev = CM11(readPort)
elif (readInterface == "CM15"):
from x10.controllers.cm15 import CM15
dev = CM15(readPort)
elif (readInterface == "CM17a"):
from x10.controllers.cm17a import CM17a
dev = CM17A(readPort)
dev.open()
# Dictionaries to decrypt hex values sent from CM11A to house/device codes as well as function on/off
# Other functions exist but on/off are the only ones handled. All other functions are ignored
# Functions are displayed as decimal values ON = 255 and OFF = 0
# See http://www.smarthome.com/manuals/protocol.txt for details
x10_house = {'6': 'A', 'e': 'B', '2': 'C', 'a': 'D', '1': 'E', '9': 'F', '5': 'G', 'd': 'H', '7': 'I', 'f': 'J', '3': 'K', 'b': 'L', '0': 'M', '8': 'N', '4': 'O', 'c': 'P'}
x10_device = {'6': '1', 'e': '2', '2': '3', 'a': '4', '1': '5', '9': '6', '5': '7', 'd': '8', '7': '9', 'f': '10', '3': '11', 'b': '12', '0': '13', '8': '14', '4': '15', 'c': '16'}
x10_funct = {'2': '255', '3': '0'}
if hosts[x] != "":
res = ping(hosts[x])
if res == True:
client.emitEvent(x, "event.device.statechanged", "255", "")
else:
client.emitEvent(x, "event.device.statechanged", "0", "")
time.sleep(float(self.sleep))
info("+------------------------------------------------------------")
info("+ wake_on_lan.py startup. Version=" + AGO_WOL_VERSION)
info("+------------------------------------------------------------")
debug = False
client = agoclient.AgoConnection("wake_on_lan")
if agoclient.getConfigOption("wake_on_lan", "debug", "false").lower() == "true":
debug = True
config = ConfigObj("/etc/opt/agocontrol/conf.d/wake_on_lan.conf")
try:
pingsleep = config["wake_on_lan"]["polltime"]
except:
pingsleep = 300
section = config["Computers"]
computers = {}
hosts = {}
for y in section:
client.addDevice(config["Computers"][y]["name"], "computer")
computers[config["Computers"][y]["name"]] = config["Computers"][y]["mac"]
client.emitEvent(
devId, "event.environment.temperaturechanged",
tempF, "degF")
else:
client.emitEvent(
devId, "event.environment.temperaturechanged",
tempC, "degC")
time.sleep(readWaitTime)
info("+------------------------------------------------------------")
info("+ temperaturnu.py startup. Version=" + AGO_TEMPERATURNU_VERSION)
info("+------------------------------------------------------------")
client = agoclient.AgoConnection("temperaturnu")
if (agoclient.getConfigOption("temperaturnu", "debug",
"false").lower() == "true"):
debug = True
lat = agoclient.getConfigOption("system", "lat", "0")
lon = agoclient.getConfigOption("system", "lon", "0")
mailadress = agoclient.getConfigOption("system", "mailadress", "none")
units = agoclient.getConfigOption("system", "units", "SI")
TempUnits = "C"
if units.lower() == "us":
TempUnits = "F"
readWaitTime = int(agoclient.getConfigOption("temperaturnu", "waittime",
"300"))
if readWaitTime < 300: #Used to guarantie minumum 5 minutes between API calls
# change=0.2 # temperature change between reports
#
import agoclient
import threading
import time
import os
import sys
import syslog
os.system("modprobe w1-gpio")
os.system("modprobe w1-therm")
client = agoclient.AgoConnection("raspi1wGPIO")
readInterval = agoclient.getConfigOption("raspi1wGPIO", "interval", "600")
interval = int(readInterval)
change = float(agoclient.getConfigOption("raspi1wGPIO", "change", "0.2"))
try:
readDevices = (line.rstrip("\n") for line in open("/sys/bus/w1/devices/w1_bus_master1/w1_master_slaves"))
except IOError:
syslog.syslog(syslog.LOG_ERR, "No devices exiting")
sys.exit()
devices = []
sensordata = {}
for device in readDevices:
try:
mPowerDevice.SetDevice(internalid, 0)
except ValueError as e:
needs_connection = True
except URLError as e:
print "Device could not be reached due to %s" % (e.reason)
print "Needs reconnect ..."
needs_connection = True
# specify our message handler method
client.addHandler(messageHandler)
# get config parameters
host = agoclient.getConfigOption("mPower", "host", "127.0.0.1")
username = agoclient.getConfigOption("mPower", "username", "ubnt")
password = agoclient.getConfigOption("mPower", "password", "ubnt")
# initial call to mPower device
mPowerDevice = pyubnt.Device(host, username, password)
# add the devices of the mPower
content = mPowerDevice.GetDevices()
i = 1
for item in content["value"]:
if "relay" in item:
client.addDevice(str(i), "switch")
i = i + 1
class mPowerEvent(threading.Thread):
t.setCoolPoint(float(content["temperature"]))
client.emitEvent(internalid, "event.environment.temperaturechanged", content["temperature"], "")
if content["command"] == "setthermostatmode":
print "set thermostat mode: " + internalid
#client.emitEvent(internalid, "event.device.statechanged", "0", "")
if content["command"] == "setthermostatfanmode":
print "set radio thermostat fan mode: " + internalid
if content["command"] == "setthermostathold":
print "set radio thermostat hold: " + internalid
# specify our message handler method
client.addHandler(messageHandler)
ipAddress = agoclient.getConfigOption("radiothermostat", "ipaddress", "0.0.0.0")
tempUnit = agoclient.getConfigOption("system", "units", "SI")
#print "IP: ", ipAddress
#print "UNIT: ", tempUnit
t = TStat(ipAddress)
t.setCacheExpiry(15)
client.addDevice(ipAddress, "thermostat")
#TODO implement thread here for polling
# in the background or need to handle some other communication. If you don't need one or if you want to keep things simple at the moment just skip this section.
class readThermostat(threading.Thread):
#def cToF(tempC):
#retval = float((float(tempC) * (9.0/5/0)) + 32)
#return retval
if uuid and uuid in client.uuids:
#uuid belongs to this handler
#TODO manage events here
pass
#=================================
#main
#=================================
#init
try:
#connect agoclient
client = agoclient.AgoConnection('alert')
#load config
configMailSmtp = agoclient.getConfigOption("mail", "smtp", "", 'alert')
configMailSender = agoclient.getConfigOption("mail", "sender", "", 'alert')
configMailLogin = agoclient.getConfigOption("mail", "login", "", 'alert')
configMailPassword = agoclient.getConfigOption("mail", "password", "", 'alert')
configMailTls = agoclient.getConfigOption("mail", "tls", "", 'alert')
configTwitterKey = agoclient.getConfigOption("twitter", "key", "", 'alert')
configTwitterSecret = agoclient.getConfigOption("twitter", "secret", "", 'alert')
configGTalkUsername = agoclient.getConfigOption("gtalk", "username", "", 'alert')
configGTalkPassword = agoclient.getConfigOption("gtalk", "password", "", 'alert')
configSmsUsername = agoclient.getConfigOption("12voip", "username", "", 'alert')
configSmsPassword = agoclient.getConfigOption("12voip", "password", "", 'alert')
configPushProvider = agoclient.getConfigOption('push', 'provider', '', 'alert')
configPushbulletApikey = agoclient.getConfigOption('pushbullet', 'apikey', '', 'alert')
configPushbulletDevices = agoclient.getConfigOption('pushbullet', 'devices', '', 'alert')
configPushoverUserid = agoclient.getConfigOption('pushover', 'userid', '', 'alert')
configNotifymyandroidApikeys = agoclient.getConfigOption('notifymyandroid', 'apikeys', '', 'alert')
#
import agoclient
import threading
import time
import serial
import json
state = {"state":"","AirTemperature":"","AirHumidity":""}
variables = {"AirHumidity.low":"","AirHumidity.high":"","AirTemperature.low":"","AirTemperature.high":"","AirCircInterval":""}
sensors = {"AirTemperature":"","AirHumidity":""}
client = agoclient.AgoConnection("MushroomControl")
myport = agoclient.getConfigOption("MushroomControl", "device", "0")
s0 = serial.Serial(myport, 9600)
def inventory ():
s0.write('{"content": {"command":"inventory"}}')
def messageHandler(internalid, content):
if "command" in content:
if content["command"] == "setvariable":
try:
myvalue = ""
if "templow" in content:
print "templow on " + internalid + " set to " + content["templow"]
s0.write('{"content": { "variable":"AirTemperature.low", "value": "%s"}}' % int(content["templow"]))
import socket
import traceback
import syslog
remote = 'python remote'
app = 'agocontrol'
tvmodel = "LE32C650"
client = agoclient.AgoConnection("TvSamsung")
def log_exception(exc):
for line in exc.split('\n'):
if len(line):
syslog.syslog(syslog.LOG_ERR, line)
hostsconfig = agoclient.getConfigOption("tvsamsung", "hosts", "192.168.14.50")
tvs={}
hosts=[]
try:
hosts = map(str, hostsconfig.split(','))
except:
syslog.syslog(syslog.LOG_ERR, 'Error when reading hosts TVs')
else:
for host in hosts:
try :
if os.system('ping -c 2 ' + host):
syslog.syslog(syslog.LOG_WARNING, 'No response to ping from %s'%host)
else :
pid = Popen(["/usr/sbin/arp", "-n", host], stdout=PIPE)
s = pid.communicate()[0]
macaddress = re.search(r"(([a-f\d]{1,2}\:){5}[a-f\d]{1,2})", s).groups()[0]
#!/usr/bin/env python
import socket
import agoclient
client = agoclient.AgoConnection("wifi370")
COMMAND_ON="\xcc\x23\x33"
COMMAND_OFF="\xcc\x24\x33"
# COMMAND_RGB="\x56\xRR\xGG\xBB\xaa"
COMMAND_STATUS="\xef\x01\x77"
try:
deviceconfig = agoclient.getConfigOption("wifi370", "devices", "192.168.80.44:5577")
devices = map(str, deviceconfig.split(','))
except e:
devices = None
print "Error, no devices:" + e
else:
for device in devices:
client.addDevice(device, "dimmerrgb")
def sendcmd(host, port, command):
try:
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect((host, port))
s.send(command)
s.close()
except socket.error as msg:
print "Socket error: ", msg
def getstatus(host, port):
if uuid and uuid in client.uuids:
#uuid belongs to this handler
#TODO manage events here
pass
#=================================
#main
#=================================
#init
try:
#connect agoclient
client = agoclient.AgoConnection('alert')
#load config
configMailSmtp = agoclient.getConfigOption("mail", "smtp", "", 'alert')
configMailSender = agoclient.getConfigOption("mail", "sender", "", 'alert')
configMailLogin = agoclient.getConfigOption("mail", "login", "", 'alert')
configMailPassword = agoclient.getConfigOption("mail", "password", "", 'alert')
configMailTls = agoclient.getConfigOption("mail", "tls", "", 'alert')
configTwitterKey = agoclient.getConfigOption("twitter", "key", "", 'alert')
configTwitterSecret = agoclient.getConfigOption("twitter", "secret", "", 'alert')
configGTalkUsername = agoclient.getConfigOption("gtalk", "username", "", 'alert')
configGTalkPassword = agoclient.getConfigOption("gtalk", "password", "", 'alert')
configSmsUsername = agoclient.getConfigOption("12voip", "username", "", 'alert')
configSmsPassword = agoclient.getConfigOption("12voip", "password", "", 'alert')
configPushProvider = agoclient.getConfigOption('push', 'provider', '', 'alert')
configPushbulletApikey = agoclient.getConfigOption('pushbullet', 'apikey', '', 'alert')
configPushbulletDevices = agoclient.getConfigOption('pushbullet', 'devices', '', 'alert')
configPushoverUserid = agoclient.getConfigOption('pushover', 'userid', '', 'alert')
configNotifymyandroidApikeys = agoclient.getConfigOption('notifymyandroid', 'apikeys', '', 'alert')
# ago Weather device
# Copyright (c) 2013 by rages
#
# Create /etc/opt/agocontrol/conf.d/weather.conf
# [weather]
# locations_ID=ITLM2916
# tempunits = f
# waittime = 30
#
import agoclient
import time
import threading
import pywapi
import string
readID = agoclient.getConfigOption("weather", "locations_ID", "00000")
readTempUnits = agoclient.getConfigOption("weather", "tempunits", "f")
readWaitTime = int(agoclient.getConfigOption("weather", "waittime", "30"))
rain = "rain"
ex_temp = "ex_temp"
ex_umidity = "ex_umidity"
client = agoclient.AgoConnection("Weather")
client.addDevice(rain, "binarysensor")
client.addDevice(ex_temp, "temperaturesensor")
client.addDevice(ex_umidity, "multilevelsensor")
class testEvent(threading.Thread):
def __init__(self, ):
#!/usr/bin/python
# copyright (c) 2013 Harald Klein <*****@*****.**>
#
import agoclient
import smtplib
import string
client = agoclient.AgoConnection("smtp")
smtpserver = agoclient.getConfigOption("smtp", "server", "mx.mail.com")
smtpport = agoclient.getConfigOption("smtp", "port", "25")
smtpfrom = agoclient.getConfigOption("smtp", "from", "*****@*****.**")
smtpauthrequired = agoclient.getConfigOption("smtp", "authrequired", "0")
smtpuser = agoclient.getConfigOption("smtp", "user", "")
smtppassword = agoclient.getConfigOption("smtp", "password", "")
def messageHandler(internalid, content):
if "command" in content:
if content["command"] == "sendmail" and "to" in content:
print "sending email"
subject = "mail from agoman"
if "subject" in content:
subject = content["subject"]
body = "no text"
if "body" in content:
body = content["body"]
body = string.join((
"From: %s" % smtpfrom,
"To: %s" % content["to"],
"Subject: %s" % subject ,
#/etc/opt/agocontrol/config.ini
#
#[raspiGPIO]
#inputs=18,23
#outputs=22,24,25
#
import agoclient
import threading
import time
import RPi.GPIO as GPIO
import syslog
client = agoclient.AgoConnection("raspiGPIO")
readInputs = agoclient.getConfigOption("raspiGPIO", "inputs", "")
readOutputs = agoclient.getConfigOption("raspiGPIO", "outputs", "")
reverse = agoclient.getConfigOption("raspiGPIO", "reverse", "0")
GPIO.setmode(GPIO.BCM)
try:
inputs = map(int, readInputs.split(','))
except:
syslog.syslog(syslog.LOG_ERR, 'no valid inputs')
inputs = None
else:
for pin in inputs:
#print pin
GPIO.setup(pin, GPIO.IN)
client.addDevice(pin, "binarysensor")
else:
u = urllib2.urlopen(url)
buffer = u.read()
result["image"] = base64.b64encode(buffer)
result["result"] = 0
except urllib2.URLError, e:
print('Error opening URL %s' % (url) + ' - Reason: ' +
e.reason)
return result
client.addHandler(messageHandler)
devicelist = agoclient.getConfigOption("webcam", "devices", "")
try:
devices = map(str, devicelist.split(','))
except:
print "error reading device list"
else:
for device in devices:
print "announcing device", device
if "rtsp://" in device:
client.addDevice(device, "onvifnvt")
else:
client.addDevice(device, "camera")
client.run()
# Squeezebox client
#
# copyright (c) 2013 James Roberts <*****@*****.**>
# Using agoclient sample code as guidance!
import agoclient
import squeezeboxserver
import threading
import time
client = agoclient.AgoConnection("squeezebox")
# if you need to fetch any settings from config.ini, use the getConfigOption call. The first parameter is the section name in the file (should be yor instance name)
# the second one is the parameter name, and the third one is the default value for the case when nothing is set in the config.ini
server = agoclient.getConfigOption("squeezebox", "server", "127.0.0.1:9000")
print "Server: " + server
squeezebox = squeezeboxserver.SqueezeboxServer(server)
# the messageHandler method will be called by the client library when a message comes in that is destined for one of the child devices you're handling
# the first parameter is your internal id (all the mapping from ago control uuids to the internal ids is handled transparently for you)
# the second parameter is a dict with the message content
def messageHandler(internalid, content):
if "command" in content:
if content["command"] == "on":
print "switching on: " + internalid
squeezebox.power(internalid, content["command"])
# route stderr to syslog
class LogErr:
def write(self, data):
syslog.syslog(syslog.LOG_ERR, data)
syslog.openlog(sys.argv[0], syslog.LOG_PID, syslog.LOG_DAEMON)
# sys.stderr = LogErr()
client = agoclient.AgoConnection("enigma2")
syslog.syslog(syslog.LOG_NOTICE, "agoenigma2.py startup")
hostsconfig = agoclient.getConfigOption("enigma2", "hosts", "")
try:
hosts = map(str, hostsconfig.split(','))
except:
syslog.syslog(syslog.LOG_NOTICE, 'no static hosts defined')
else:
for host in hosts:
client.addDevice(host, "settopbox")
syslog.syslog(syslog.LOG_NOTICE, "discovering devices")
def mycallback(name, host, port):
if "dm500hd" in name or "dm600pvr" in name:
# print "callback %s %s %s\n" % (name, host, port)
import agoclient
# route stderr to syslog
class LogErr:
def write(self, data):
syslog.syslog(syslog.LOG_ERR, data)
syslog.openlog(sys.argv[0], syslog.LOG_PID, syslog.LOG_DAEMON)
# sys.stderr = LogErr()
client = agoclient.AgoConnection("enigma2")
syslog.syslog(syslog.LOG_NOTICE, "agoenigma2.py startup")
hostsconfig = agoclient.getConfigOption("enigma2", "hosts", "")
try:
hosts = map(str, hostsconfig.split(','))
except:
syslog.syslog(syslog.LOG_NOTICE, 'no static hosts defined')
else:
for host in hosts:
client.addDevice(host, "settopbox")
syslog.syslog(syslog.LOG_NOTICE, "discovering devices")
def mycallback(name, host, port):
if "dm500hd" in name or "dm600pvr" in name:
# print "callback %s %s %s\n" % (name, host, port)
try:
'''
self._tdlib.tdStop(c_int(deviceid))
def methods(self, deviceid, methods):
'''
Stop the shutter.
Test if the device support the up command
If not try to manage it supporting the on command
@param deviceid : id of the module
'''
#int methods = tdMethods(id, TELLSTICK_TURNON | \
# TELLSTICK_TURNOFF | TELLSTICK_BELL);
return self._tdlib.tdMethods(c_int(deviceid), methods)
client = agoclient.AgoConnection("tellstick")
device = agoclient.getConfigOption("tellstick", "device", "/dev/tellstick")
delay_rf = float(agoclient.getConfigOption("tellstick", "delay_rf", "400"))
lib = Telldusd()
sensor_func = SENSORFUNC(sensor_callback)
device_func = DEVICEFUNC(device_callback)
raw_func = RAWFUNC(raw_callback)
lib.register_sensor_event(sensor_func)
lib.register_device_event(device_func)
lib.register_device_change_event(raw_func)
devices=lib.get_devices()
for dev in devices.keys() :
if lib.is_dimmer(dev) :
client.addDevice(lib.make_device_id(dev), "dimmer")
#! /usr/bin/env python
import sys
import syslog
import ow
import time
import threading
import agoclient
client = agoclient.AgoConnection("owfs")
device = agoclient.getConfigOption("owfs", "device", "/dev/usbowfs")
# route stderr to syslog
class LogErr:
def write(self, data):
syslog.syslog(syslog.LOG_ERR, data)
syslog.openlog(sys.argv[0], syslog.LOG_PID, syslog.LOG_DAEMON)
# sys.stderr = LogErr()
sensors = {}
syslog.syslog(syslog.LOG_NOTICE, "agoowfs.py startup")
try:
ow.init( device )
except ow.exNoController:
syslog.syslog(syslog.LOG_ERROR, "can't open one wire device, aborting")
time.sleep(5)
exit(-1)
client.emitEvent(internalid,
"event.environment.temperaturechanged",
content["temperature"], "")
if content["command"] == "setthermostatmode":
print "set thermostat mode: " + internalid
#client.emitEvent(internalid, "event.device.statechanged", "0", "")
if content["command"] == "setthermostatfanmode":
print "set radio thermostat fan mode: " + internalid
if content["command"] == "setthermostathold":
print "set radio thermostat hold: " + internalid
# specify our message handler method
client.addHandler(messageHandler)
ipAddress = agoclient.getConfigOption("radiothermostat", "ipaddress",
"0.0.0.0")
tempUnit = agoclient.getConfigOption("system", "units", "SI")
#print "IP: ", ipAddress
#print "UNIT: ", tempUnit
t = TStat(ipAddress)
t.setCacheExpiry(15)
client.addDevice(ipAddress, "thermostat")
#TODO implement thread here for polling
# in the background or need to handle some other communication. If you don't need one or if you want to keep things simple at the moment just skip this section.
class readThermostat(threading.Thread):
#def cToF(tempC):
#retval = float((float(tempC) * (9.0/5/0)) + 32)
ex_humidity = "%s-humidity-%s"
ex_pressure = "%s-pressure-%s"
ex_windspeed = "%s-windspeed-%s"
ex_windangle = "%s-windangle-%s"
ex_rain3h = "%s-rain3h-%s"
ex_cloud = "%s-cloud-%s"
ex_snow3h = "%s-snow3h-%s"
def log_exception(exc):
for line in exc.split('\n'):
if len(line):
syslog.syslog(syslog.LOG_ERR, line)
client = agoclient.AgoConnection("Weather")
weatherconfig = agoclient.getConfigOption("weather","locations","Dijon,France")
locations=[]
fails={}
try:
locations = map(str, weatherconfig.split(','))
except:
syslog.syslog(syslog.LOG_ERR, 'Error when reading weather locations')
else:
if '' in locations :
locations.remove('')
for loc in locations:
try :
client.addDevice(ex_rain%(loc,0), "binarysensor")
client.addDevice(ex_temp%(loc,0), "temperaturesensor")
client.addDevice(ex_humidity%(loc,0), "multilevelsensor")
client.addDevice(ex_pressure%(loc,0), "multilevelsensor")
if hosts[x] != '':
res = ping (hosts[x])
if res==True:
client.emitEvent(x, "event.device.statechanged", "255", "")
else:
client.emitEvent(x, "event.device.statechanged", "0", "")
time.sleep (float(self.sleep))
info( "+------------------------------------------------------------")
info( "+ wake_on_lan.py startup. Version=" + AGO_WOL_VERSION)
info( "+------------------------------------------------------------")
debug=False
client = agoclient.AgoConnection("wake_on_lan")
if (agoclient.getConfigOption("wake_on_lan", "debug", "false").lower() == "true"):
debug = True
config = ConfigObj("/etc/opt/agocontrol/conf.d/wake_on_lan.conf")
try:
pingsleep = config['wake_on_lan']['polltime']
except:
pingsleep = 300
section = config['Computers']
computers={}
hosts={}
for y in section:
client.addDevice(config['Computers'][y]['name'], "computer")
computers[config['Computers'][y]['name']] = config['Computers'][y]['mac']
import agoclient
import time
import traceback
import bluetooth
import threading
from threading import Timer
import syslog
client = agoclient.AgoConnection("Bluescan")
def log_exception(exc):
for line in exc.split('\n'):
if len(line):
syslog.syslog(syslog.LOG_ERR, line)
method = agoclient.getConfigOption("bluescan","method","lookup")
scan_delay = int(agoclient.getConfigOption("bluescan","delay-scan","30"))
error_delay = int(agoclient.getConfigOption("bluescan","delay-error","450"))
hysteresis = int(agoclient.getConfigOption("bluescan","hysteresis","3"))
phoneconfig = agoclient.getConfigOption("bluescan","phones","D0:B3:3F:BC:0E:21")
sphones=[]
phones={}
ex_bluescan="bluescan-%s"
try:
sphones = map(str, phoneconfig.split(','))
except:
syslog.syslog(syslog.LOG_NOTICE, 'no phone defined')
else:
for phon in sphones:
try :
#!/usr/bin/python
import agoclient
import threading
import time
import logging
readInterface = agoclient.getConfigOption("x10", "interface", "CM11")
readPort = agoclient.getConfigOption("x10", "device", "/dev/ttyUSB1")
if (readInterface == "CM11"):
from x10.controllers.cm11 import CM11
dev = CM11(readPort)
elif (readInterface == "CM15"):
from x10.controllers.cm15 import CM15
dev = CM15(readPort)
elif (readInterface == "CM17a"):
from x10.controllers.cm17a import CM17a
dev = CM17A(readPort)
dev.open()
# Dictionaries to decrypt hex values sent from CM11A to house/device codes as well as function on/off
# Other functions exist but on/off are the only ones handled. All other functions are ignored
# Functions are displayed as decimal values ON = 255 and OFF = 0
# See http://www.smarthome.com/manuals/protocol.txt for details
x10_house = {
'6': 'A',
'e': 'B',
'2': 'C',
#/etc/opt/agocontrol/config.ini
#
#[raspiGPIO]
#inputs=18,23
#outputs=22,24,25
#
import agoclient
import threading
import time
import RPi.GPIO as GPIO
import syslog
client = agoclient.AgoConnection("raspiGPIO")
readInputs = agoclient.getConfigOption("raspiGPIO", "inputs", "")
readOutputs = agoclient.getConfigOption("raspiGPIO", "outputs", "")
reverse = agoclient.getConfigOption("raspiGPIO", "reverse", "0")
GPIO.setmode(GPIO.BCM)
try:
inputs = map(int, readInputs.split(','))
except:
syslog.syslog(syslog.LOG_ERR, 'no valid inputs')
inputs = None
else:
for pin in inputs:
#print pin
GPIO.setup(pin, GPIO.IN)
client.addDevice(pin, "binarysensor")
#!/usr/bin/env python
import socket
import agoclient
client = agoclient.AgoConnection("wifi370")
COMMAND_ON = "\xcc\x23\x33"
COMMAND_OFF = "\xcc\x24\x33"
# COMMAND_RGB="\x56\xRR\xGG\xBB\xaa"
COMMAND_STATUS = "\xef\x01\x77"
try:
deviceconfig = agoclient.getConfigOption("wifi370", "devices",
"192.168.80.44:5577")
devices = map(str, deviceconfig.split(','))
except e:
devices = None
print "Error, no devices:" + e
else:
for device in devices:
client.addDevice(device, "dimmerrgb")
def sendcmd(host, port, command):
try:
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect((host, port))
s.send(command)
s.close()
except socket.error as msg:
print "Socket error: ", msg
