def main():
""" main entry point for module execution
"""
argument_spec = dict(src=dict(required=True),
force=dict(default=False, type='bool'),
include_defaults=dict(default=False, type='bool'),
backup=dict(default=False, type='bool'),
replace=dict(default=False, type='bool'),
config=dict())
mutually_exclusive = [('config', 'backup'), ('config', 'force')]
module = NetworkModule(argument_spec=argument_spec,
mutually_exclusive=mutually_exclusive,
supports_check_mode=True)
replace = module.params['replace']
commands = list()
running = None
result = dict(changed=False)
candidate = NetworkConfig(contents=module.params['src'], indent=3)
if replace:
if module.params['transport'] == 'cli':
module.fail_json(msg='config replace is only supported over eapi')
commands = str(candidate).split('\n')
else:
contents = get_config(module)
if contents:
running = NetworkConfig(contents=contents, indent=3)
result['_backup'] = contents
if not module.params['force']:
commands = candidate.difference((running or list()))
commands = dumps(commands, 'commands').split('\n')
commands = [str(c) for c in commands if c]
else:
commands = str(candidate).split('\n')
commands = filter_exit(commands)
if commands:
if not module.check_mode:
response = module.config.load_config(commands,
replace=replace,
session='eos_template',
commit=True)
module.cli('no configure session eos_template')
result['responses'] = response
result['changed'] = True
result['updates'] = commands
module.exit_json(**result)
def main():
""" main entry point for module execution
"""
argument_spec = dict(
lines=dict(aliases=['commands'], type='list'),
parents=dict(type='list'),
src=dict(type='path'),
before=dict(type='list'),
after=dict(type='list'),
match=dict(default='line', choices=['line', 'strict', 'exact', 'none']),
replace=dict(default='line', choices=['line', 'block', 'config']),
# this argument is deprecated in favor of setting match: none
# it will be removed in a future version
force=dict(default=False, type='bool'),
backup=dict(type='bool', default=False),
config=dict(),
defaults=dict(type='bool', default=False),
save=dict(default=False, type='bool'),
)
mutually_exclusive = [('lines', 'src')]
required_if = [('match', 'strict', ['lines']),
('match', 'exact', ['lines']),
('replace', 'block', ['lines']),
('replace', 'config', ['src'])]
module = NetworkModule(argument_spec=argument_spec,
connect_on_load=False,
mutually_exclusive=mutually_exclusive,
required_if=required_if,
supports_check_mode=True)
if module.params['force'] is True:
module.params['match'] = 'none'
warnings = list()
check_args(module, warnings)
result = dict(changed=False, warnings=warnings)
if module.params['backup']:
result['__backup__'] = module.config.get_config()
try:
run(module, result)
except NetworkError:
exc = get_exception()
module.fail_json(msg=str(exc), **exc.kwargs)
module.exit_json(**result)
def main():
""" main entry point for module execution
"""
argument_spec = dict(
src=dict(type='path'),
lines=dict(aliases=['commands'], type='list'),
parents=dict(type='list'),
before=dict(type='list'),
after=dict(type='list'),
match=dict(default='line', choices=['line', 'strict', 'exact', 'none']),
replace=dict(default='line', choices=['line', 'block', 'config']),
# this argument is deprecated in favor of setting match: none
# it will be removed in a future version
force=dict(default=False, type='bool'),
config=dict(),
defaults=dict(type='bool', default=False),
backup=dict(type='bool', default=False),
save=dict(default=False, type='bool'),
)
mutually_exclusive = [('lines', 'src')]
required_if = [('match', 'strict', ['lines']),
('match', 'exact', ['lines']),
('replace', 'block', ['lines']),
('replace', 'config', ['src'])]
module = NetworkModule(argument_spec=argument_spec,
mutually_exclusive=mutually_exclusive,
required_if=required_if,
supports_check_mode=True)
if module.params['force'] is True:
module.params['match'] = 'none'
warnings = list()
check_args(module, warnings)
result = dict(changed=False, warnings=warnings)
if module.params['backup']:
result['__backup__'] = module.config.get_config()
try:
run(module, result)
except NetworkError:
exc = get_exception()
module.fail_json(msg=str(exc), **exc.kwargs)
module.exit_json(**result)
def main():
""" main entry point for module execution
"""
argument_spec = dict(
http=dict(aliases=['enable_http'],
default=False,
type='bool',
setter='set_protocol_http'),
http_port=dict(default=80, type='int', setter='set_protocol_http'),
https=dict(aliases=['enable_https'],
default=True,
type='bool',
setter='set_protocol_https'),
https_port=dict(default=443, type='int', setter='set_protocol_https'),
local_http=dict(aliases=['enable_local_http'],
default=False,
type='bool',
setter='set_local_http'),
local_http_port=dict(default=8080, type='int',
setter='set_local_http'),
socket=dict(aliases=['enable_socket'], default=False, type='bool'),
vrf=dict(default='default'),
qos=dict(default=0, type='int'),
config=dict(),
# Only allow use of transport cli when configuring eAPI
transport=dict(required=True, choices=['cli']),
state=dict(default='started', choices=['stopped', 'started']),
)
module = NetworkModule(argument_spec=argument_spec,
connect_on_load=False,
supports_check_mode=True)
state = module.params['state']
warnings = list()
result = dict(changed=False, warnings=warnings)
commands = list()
invoke(state, module, commands)
try:
load(module, commands, result)
except NetworkError:
exc = get_exception()
module.fail_json(msg=str(exc), **exc.kwargs)
collect_facts(module, result)
clean_result(result)
module.exit_json(**result)
def main():
spec = dict(
# { command: <str>, output: <str>, prompt: <str>, response: <str> }
commands=dict(type='list', required=True),
wait_for=dict(type='list', aliases=['waitfor']),
match=dict(default='all', choices=['all', 'any']),
retries=dict(default=10, type='int'),
interval=dict(default=1, type='int'))
module = NetworkModule(argument_spec=spec,
connect_on_load=False,
supports_check_mode=True)
commands = list(parse_commands(module))
conditionals = module.params['wait_for'] or list()
warnings = list()
runner = CommandRunner(module)
for cmd in commands:
if module.check_mode and not cmd['command'].startswith('show'):
warnings.append('only show commands are supported when using '
'check mode, not executing `%s`' % cmd['command'])
else:
if cmd['command'].startswith('conf'):
module.fail_json(msg='eos_command does not support running '
'config mode commands. Please use '
'eos_config instead')
try:
runner.add_command(**cmd)
except AddCommandError:
exc = get_exception()
warnings.append('duplicate command detected: %s' % cmd)
for item in conditionals:
runner.add_conditional(item)
runner.retries = module.params['retries']
runner.interval = module.params['interval']
runner.match = module.params['match']
try:
runner.run()
except FailedConditionsError:
exc = get_exception()
module.fail_json(msg=str(exc), failed_conditions=exc.failed_conditions)
except NetworkError:
exc = get_exception()
module.fail_json(msg=str(exc))
result = dict(changed=False, stdout=list())
for cmd in commands:
try:
output = runner.get_command(cmd['command'], cmd.get('output'))
except ValueError:
output = 'command not executed due to check_mode, see warnings'
result['stdout'].append(output)
result['warnings'] = warnings
result['stdout_lines'] = list(to_lines(result['stdout']))
module.exit_json(**result)
def main():
spec = dict(gather_subset=dict(default=['!config'], type='list'))
module = NetworkModule(argument_spec=spec, supports_check_mode=True)
gather_subset = module.params['gather_subset']
runable_subsets = set()
exclude_subsets = set()
for subset in gather_subset:
if subset == 'all':
runable_subsets.update(VALID_SUBSETS)
continue
if subset.startswith('!'):
subset = subset[1:]
if subset == 'all':
exclude_subsets.update(VALID_SUBSETS)
continue
exclude = True
else:
exclude = False
if subset not in VALID_SUBSETS:
module.fail_json(msg='Subset must be one of [%s], got %s' %
(', '.join(VALID_SUBSETS), subset))
if exclude:
exclude_subsets.add(subset)
else:
runable_subsets.add(subset)
if not runable_subsets:
runable_subsets.update(VALID_SUBSETS)
runable_subsets.difference_update(exclude_subsets)
runable_subsets.add('default')
facts = dict()
facts['gather_subset'] = list(runable_subsets)
runner = CommandRunner(module)
instances = list()
for key in runable_subsets:
instances.append(FACT_SUBSETS[key](runner))
runner.run()
try:
for inst in instances:
inst.populate()
facts.update(inst.facts)
except Exception:
module.exit_json(out=module.from_json(runner.items))
ansible_facts = dict()
for key, value in iteritems(facts):
key = 'ansible_net_%s' % key
ansible_facts[key] = value
module.exit_json(ansible_facts=ansible_facts)
def main():
spec = dict(
gather_subset=dict(default=['!config'], type='list')
)
module = NetworkModule(argument_spec=spec, supports_check_mode=True)
gather_subset = module.params['gather_subset']
runable_subsets = set()
exclude_subsets = set()
for subset in gather_subset:
if subset == 'all':
runable_subsets.update(VALID_SUBSETS)
continue
if subset.startswith('!'):
subset = subset[1:]
if subset == 'all':
exclude_subsets.update(VALID_SUBSETS)
continue
exclude = True
else:
exclude = False
if subset not in VALID_SUBSETS:
module.fail_json(msg='Subset must be one of [%s], got %s' %
(', '.join(VALID_SUBSETS), subset))
if exclude:
exclude_subsets.add(subset)
else:
runable_subsets.add(subset)
if not runable_subsets:
runable_subsets.update(VALID_SUBSETS)
runable_subsets.difference_update(exclude_subsets)
runable_subsets.add('default')
facts = dict()
facts['gather_subset'] = list(runable_subsets)
runner = CommandRunner(module)
instances = list()
for key in runable_subsets:
instances.append(FACT_SUBSETS[key](runner))
runner.run()
try:
for inst in instances:
inst.populate()
facts.update(inst.facts)
except Exception:
module.exit_json(out=module.from_json(runner.items))
ansible_facts = dict()
for key, value in iteritems(facts):
key = 'ansible_net_%s' % key
ansible_facts[key] = value
module.exit_json(ansible_facts=ansible_facts)
