def __init__(master):
master = tk.Tk()
master.geometry("340x410")
master.title("Commander Pi")
bootloader_label = tk.Label( master, text=btl.bootloader_version, borderwidth=2, relief="groove", justify="center", wraplength="310")
bootloader_label.pack(fill=X)
link = tk.Label( master, text="Official bootloader documentation", cursor="hand2", fg="blue")
link.pack(fill=X)
mlink = 'https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711_bootloader_config.md'
link.bind("<Button-1>", lambda e: rs.cpi_open_url(mlink))
test = tk.Label(master, text=btl.read_bootloader(), borderwidth=2, relief="groove", justify="left")
test.pack(fill=X)
#button = Button(master, text="test")
#button.pack(side=RIGHT)
bind_label = tk.Label( master, text="Press Escape to close" )
bind_label.pack(side=BOTTOM)
master.bind('<Escape>', lambda e:killwindow(e, master))
master.mainloop()
def __init__(master):
master = tk.Tk()
master.geometry("430x550")
master.title("Commander Pi")
mainframe = Frame(master)
mainframe.pack(padx=10, pady=10)
titleframe = Frame(mainframe)
titleframe.pack(fill=X)
image = Image.open("/home/pi/CommanderPi/src/icons/Bootloaders.png")
photo = ImageTk.PhotoImage(image, master=titleframe)
title_label = tk.Label(titleframe,
text=" Bootloader",
font=("TkDefaultFont", 18, "bold"),
image=photo,
compound=LEFT,
anchor='w')
title_label.image = photo
title_label.pack(side=LEFT)
separator = ttk.Separator(mainframe, orient='horizontal')
separator.pack(fill=X, expand=True, pady=5)
versionx_label = tk.Label(mainframe,
text="Version information:",
font=("TkDefaultFont", 11, "bold"),
anchor='w')
versionx_label.pack(fill=X)
#310
bootloader_version_label = tk.Label(mainframe,
text=btl.bootloader_version,
justify="left",
wraplength="360",
anchor='w')
bootloader_version_label.pack(fill=X)
boot_frame = Frame(mainframe)
boot_frame.pack(fill=X)
bootloader_label = tk.Label(boot_frame,
text=btl.read_bootloader(),
justify="left",
anchor='w')
bootloader_label.grid(row=0, column=0, rowspan=11)
separator = ttk.Separator(mainframe, orient='horizontal')
separator.pack(fill=X, expand=True, pady=5)
setup_b = tk.Button(mainframe,
text="Setup config",
command=lambda: config_boot(),
font=("TkDefaultFont", 10, "bold"),
cursor="hand2")
setup_b.pack()
link = tk.Label(mainframe,
text="Official bootloader documentation",
cursor="hand2",
fg="#1D81DA")
link.pack(fill=X)
mlink = 'https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711_bootloader_config.md'
link.bind("<Button-1>", lambda e: rs.cpi_open_url(mlink))
bind_label = tk.Label(mainframe,
text="Press [Esc] to close",
font=("TkDefaultFont", 11, "bold"))
bind_label.pack(side=BOTTOM)
master.bind('<Escape>', lambda e: killwindow(e, master))
def config_boot():
msb.showwarning(
title="Warning",
message=
"This is only for advanced users!\nDo it on your own risk!")
#boot_frame.grid_forget()
setup_b.destroy()
bootloader_label.destroy()
config_stuff = "BOOT_UART:\nWAKE_ON_GPIO:\nPOWER_OFF_ON_HALT:\nDHCP_TIMEOUT:\nDHCP_REQ_TIMEOUT:\nTFTP_FILE_TIMEOUT:\nTFTP_IP:\nTFTP_PREFIX:\nBOOT_ORDER:\nSD_BOOT_MAX_RETRIES:\nNET_BOOT_MAX_RETRIES:\n"
#bootloader_label.config(text=config_stuff, font=("TkDefaultFont", 12))
#config_text_label = tk.Label(boot_frame, text=config_stuff, justify="left", anchor='w')
#config_text_label.grid(row=0, column=0, rowspan=11)
btl_label1 = tk.Label(boot_frame,
text="BOOT_UART:",
justify=LEFT,
width=25,
anchor='w')
btl_label1.grid(row=0, column=0)
BOOT_UART_entry = tk.Entry(boot_frame, justify=CENTER, width=10)
BOOT_UART_entry.grid(row=0, column=1, pady=0, sticky=N)
btl_label2 = tk.Label(boot_frame,
text="WAKE_ON_GPIO:",
justify=LEFT,
width=25,
anchor='w')
btl_label2.grid(row=1, column=0)
WAKE_ON_GPIO_entry = tk.Entry(boot_frame, justify=CENTER, width=10)
WAKE_ON_GPIO_entry.grid(row=1, column=1, pady=0, sticky=N)
btl_label3 = tk.Label(boot_frame,
text="POWER_OFF_ON_HALT:",
justify=LEFT,
width=25,
anchor='w')
btl_label3.grid(row=2, column=0)
POWER_OFF_ON_HALT_entry = tk.Entry(boot_frame,
justify=CENTER,
width=10)
POWER_OFF_ON_HALT_entry.grid(row=2, column=1, pady=0, sticky=N)
btl_label4 = tk.Label(boot_frame,
text="DHCP_TIMEOUT:",
justify=LEFT,
width=25,
anchor='w')
btl_label4.grid(row=3, column=0)
DHCP_TIMEOUT_entry = tk.Entry(boot_frame, justify=CENTER, width=10)
DHCP_TIMEOUT_entry.grid(row=3, column=1, pady=0, sticky=N)
btl_label5 = tk.Label(boot_frame,
text="DHCP_REQ_TIMEOUT:",
justify=LEFT,
width=25,
anchor='w')
btl_label5.grid(row=4, column=0)
DHCP_REQ_TIMEOUT_entry = tk.Entry(boot_frame,
justify=CENTER,
width=10)
DHCP_REQ_TIMEOUT_entry.grid(row=4, column=1, pady=0, sticky=N)
btl_label6 = tk.Label(boot_frame,
text="TFTP_FILE_TIMEOUT:",
justify=LEFT,
width=25,
anchor='w')
btl_label6.grid(row=5, column=0)
TFTP_FILE_TIMEOUT_entry = tk.Entry(boot_frame,
justify=CENTER,
width=10)
TFTP_FILE_TIMEOUT_entry.grid(row=5, column=1, pady=0, sticky=N)
btl_label7 = tk.Label(boot_frame,
text="TFTP_IP:",
justify=LEFT,
width=25,
anchor='w')
btl_label7.grid(row=6, column=0)
TFTP_IP_entry = tk.Entry(boot_frame, justify=CENTER, width=10)
TFTP_IP_entry.grid(row=6, column=1, pady=0, sticky=N)
btl_label8 = tk.Label(boot_frame,
text="TFTP_PREFIX:",
justify=LEFT,
width=25,
anchor='w')
btl_label8.grid(row=7, column=0)
TFTP_PREFIX_entry = tk.Entry(boot_frame, justify=CENTER, width=10)
TFTP_PREFIX_entry.grid(row=7, column=1, pady=0, sticky=N)
btl_label9 = tk.Label(boot_frame,
text="BOOT_ORDER",
justify=LEFT,
width=25,
anchor='w')
btl_label9.grid(row=8, column=0)
BOOT_ORDER_entry = tk.Entry(boot_frame, justify=CENTER, width=10)
BOOT_ORDER_entry.grid(row=8, column=1, pady=0, sticky=N)
btl_label10 = tk.Label(boot_frame,
text="SD_BOOT_MAX_RETRIES:",
justify=LEFT,
width=25,
anchor='w')
btl_label10.grid(row=9, column=0)
SD_BOOT_MAX_RETRIES_entry = tk.Entry(boot_frame,
justify=CENTER,
width=10)
SD_BOOT_MAX_RETRIES_entry.grid(row=9, column=1, pady=0, sticky=N)
btl_label11 = tk.Label(boot_frame,
text="NET_BOOT_MAX_RETRIES:",
justify=LEFT,
width=25,
anchor='w')
btl_label11.grid(row=10, column=0)
NET_BOOT_MAX_RETRIES_entry = tk.Entry(boot_frame,
justify=CENTER,
width=10)
NET_BOOT_MAX_RETRIES_entry.grid(row=10, column=1, pady=0, sticky=N)
btl_btn1 = tk.Button(boot_frame,
text="Apply and save",
font=("TkDefaultFont", 10, "bold"),
cursor="hand2",
command=lambda: push_config())
btl_btn1.grid(row=11, column=1)
btl_btn2 = tk.Button(boot_frame,
text="Cancel",
font=("TkDefaultFont", 10, "bold"),
cursor="hand2",
command=lambda: cancel())
btl_btn2.grid(row=11, column=0, sticky=W)
#BOOT_UART_entry.insert(END, btl.BOOT_UART[-2:-1])
#WAKE_ON_GPIO_entry.insert(END, btl.WAKE_ON_GPIO[-2:-1])
#POWER_OFF_ON_HALT_entry.insert(END, btl.POWER_OFF_ON_HALT[-2:-1])
#DHCP_TIMEOUT_entry.insert(END, btl.DHCP_TIMEOUT[-6:-1])
def push_config():
confirm_msgb = msb.askyesno(title=None,
message="Are you sure?")
if confirm_msgb == True:
btl.set_bootloader_value("BOOT_UART",
BOOT_UART_entry.get())
btl.set_bootloader_value("WAKE_ON_GPIO",
WAKE_ON_GPIO_entry.get())
btl.set_bootloader_value("POWER_OFF_ON_HALT",
POWER_OFF_ON_HALT_entry.get())
btl.set_bootloader_value("DHCP_TIMEOUT",
DHCP_TIMEOUT_entry.get())
btl.set_bootloader_value("DHCP_REQ_TIMEOUT",
DHCP_REQ_TIMEOUT_entry.get())
btl.set_bootloader_value("TFTP_FILE_TIMEOUT",
TFTP_FILE_TIMEOUT_entry.get())
btl.set_bootloader_value("TFTP_IP", TFTP_IP_entry.get())
btl.set_bootloader_value("TFTP_PREFIX",
TFTP_PREFIX_entry.get())
btl.set_bootloader_value("BOOT_ORDER",
BOOT_ORDER_entry.get())
btl.set_bootloader_value("SD_BOOT_MAX_RETRIES",
SD_BOOT_MAX_RETRIES_entry.get())
btl.set_bootloader_value("NET_BOOT_MAX_RETRIES",
NET_BOOT_MAX_RETRIES_entry.get())
btl.write_bootloader()
master.destroy()
msb.showinfo(title="", message="Now you need to reboot")
#rs.reboot()
def cancel():
importlib.reload(btl)
importlib.reload(rs)
master.destroy()
bopen(Bootloader_Info_Window)
master.mainloop()