def getCPUSpeedString():
if getMachineBuild() in ('vusolo4k','vuultimo4k'):
return "1,5 GHz"
elif getMachineBuild() in ('formuler1', 'triplex'):
return "1,3 GHz"
elif getMachineBuild() in ('vuuno4k','dm900', 'gb7252', 'dags7252'):
return "1,7 GHz"
elif getMachineBuild() in ('hd51','hd52','sf4008','vs1500','et1x000','h7'):
try:
import binascii
f = open('/sys/firmware/devicetree/base/cpus/cpu@0/clock-frequency', 'rb')
clockfrequency = f.read()
f.close()
return "%s MHz" % str(round(int(binascii.hexlify(clockfrequency), 16)/1000000,1))
except:
return "1,7 GHz"
else:
try:
file = open('/proc/cpuinfo', 'r')
lines = file.readlines()
for x in lines:
splitted = x.split(': ')
if len(splitted) > 1:
splitted[1] = splitted[1].replace('\n','')
if splitted[0].startswith("cpu MHz"):
mhz = float(splitted[1].split(' ')[0])
if mhz and mhz >= 1000:
mhz = "%s GHz" % str(round(mhz/1000,1))
else:
mhz = "%s MHz" % str(round(mhz,1))
file.close()
return mhz
except IOError:
return "unavailable"
def __init__(self):
Renderer.__init__(self)
self.PicLoad = ePicLoad()
self.PicLoad.PictureData.get().append(self.updatePicon)
self.piconsize = (0,0)
self.pngname = ""
self.lastPath = None
if getBoxType() == 'vuultimo' or getMachineBuild() == "inihdp":
pngname = findLcdPicon("lcd_picon_default")
else:
pngname = findLcdPicon("picon_default")
self.defaultpngname = None
if not pngname:
if getBoxType() == 'vuultimo' or getMachineBuild() == "inihdp":
tmp = resolveFilename(SCOPE_ACTIVE_SKIN, "lcd_picon_default.png")
else:
tmp = resolveFilename(SCOPE_ACTIVE_SKIN, "picon_default.png")
if pathExists(tmp):
pngname = tmp
else:
if getBoxType() == 'vuultimo' or getMachineBuild() == "inihdp":
pngname = resolveFilename(SCOPE_ACTIVE_SKIN, "lcd_picon_default.png")
else:
pngname = resolveFilename(SCOPE_ACTIVE_SKIN, "picon_default.png")
if os.path.getsize(pngname):
self.defaultpngname = pngname
def updateList(self):
self.list = []
list2 = []
self.Console = Console()
self.Console.ePopen("sfdisk -l | grep swap | awk '{print $(NF-9)}' >/tmp/devices.tmp")
sleep(0.5)
f = open('/tmp/devices.tmp', 'r')
swapdevices = f.read()
f.close()
if path.exists('/tmp/devices.tmp'):
remove('/tmp/devices.tmp')
swapdevices = swapdevices.replace('\n','')
swapdevices = swapdevices.split('/')
f = open('/proc/partitions', 'r')
for line in f.readlines():
parts = line.strip().split()
if not parts:
continue
device = parts[3]
if not search('sd[a-z][1-9]',device) and not search('mmcblk[0-9]p[1-9]',device):
continue
if getMachineBuild() in ('gbmv200','multibox','h9combo','v8plus','hd60','hd61','vuduo4k','ustym4kpro','beyonwizv2','sf8008','cc1','dags72604','u51','u52','u53','u54','vuzero4k','u5','sf5008','et13000','et1x000','vuuno4k','vuuno4kse', 'vuultimo4k', 'vusolo4k', 'hd51', 'hd52', 'dm820', 'dm7080', 'sf4008', 'dm900', 'dm920', 'gb7252', 'dags7252', 'vs1500','h7','8100s') and search('mmcblk0p[1-9]',device):
continue
if getMachineBuild() in ('xc7439','osmio4k') and search('mmcblk1p[1-9]',device):
continue
if device in list2:
continue
if device in swapdevices:
continue
self.buildMy_rec(device)
list2.append(device)
f.close()
self['config'].list = self.list
self['config'].l.setList(self.list)
self['Linconn'].hide()
def updateList2(self):
self.activityTimer.stop()
self.list = []
list2 = []
f = open('/proc/partitions', 'r')
for line in f.readlines():
parts = line.strip().split()
if not parts:
continue
device = parts[3]
if not search('sd[a-z][1-9]',device) and not search('mmcblk[0-9]p[1-9]',device):
continue
if getMachineBuild() in ('vuzero4k','u5','sf5008','et13000','et1x000','vuuno4k','vuuno4kse', 'vuultimo4k', 'vusolo4k', 'hd51', 'hd52', 'dm820', 'dm7080', 'sf4008', 'dm900', 'dm920', 'gb7252', 'dags7252', 'vs1500','h7','8100s') and search('mmcblk0p[1-9]',device):
continue
if getMachineBuild() in ('xc7439') and search('mmcblk1p[1-9]',device):
continue
if getMachineBuild() in ('u5') and search('mmcblk1p[1]',device):
continue
if device in list2:
continue
self.buildMy_rec(device)
list2.append(device)
f.close()
self['list'].list = self.list
self['lab1'].hide()
def getBlockDevInfo(self, blockdev):
devpath = "/sys/block/" + blockdev
error = False
removable = False
BLACKLIST=[]
if getMachineBuild() in ('vuzero4k','et1x000','vuuno4k','vuuno4kse','vuultimo4k','vusolo4k','hd51','hd52','sf4008','dm900','dm7080','dm820', 'gb7252', 'dags7252', 'vs1500','h7','8100s','et13000','sf5008'):
BLACKLIST=["mmcblk0"]
elif getMachineBuild() in ('xc7439'):
BLACKLIST=["mmcblk1"]
elif getMachineBuild() in ('u5','u5pvr'):
BLACKLIST=["mmcblk0", "mmcblk1"]
blacklisted = False
if blockdev[:7] in BLACKLIST:
blacklisted = True
if blockdev.startswith("mmcblk") and (re.search(r"mmcblk\dboot", blockdev) or re.search(r"mmcblk\drpmb", blockdev)):
blacklisted = True
is_cdrom = False
partitions = []
try:
if os.path.exists(devpath + "/removable"):
removable = bool(int(readFile(devpath + "/removable")))
if os.path.exists(devpath + "/dev"):
dev = int(readFile(devpath + "/dev").split(':')[0])
else:
dev = None
devlist = [1, 7, 31, 253, 254] # ram, loop, mtdblock, romblock, ramzswap
if dev in devlist:
blacklisted = True
if blockdev[0:2] == 'sr':
is_cdrom = True
if blockdev[0:2] == 'hd':
try:
media = readFile("/proc/ide/%s/media" % blockdev)
if "cdrom" in media:
is_cdrom = True
except IOError:
error = True
# check for partitions
if not is_cdrom and os.path.exists(devpath):
for partition in os.listdir(devpath):
if partition[0:len(blockdev)] != blockdev:
continue
if dev == 179 and not re.search(r"mmcblk\dp\d+", partition):
continue
partitions.append(partition)
else:
self.cd = blockdev
except IOError:
error = True
# check for medium
medium_found = True
try:
if os.path.exists("/dev/" + blockdev):
open("/dev/" + blockdev).close()
except IOError, err:
if err.errno == 159: # no medium present
medium_found = False
def initDevice(self):
print "[BluetoothManager] initDevice"
cmd = "hciconfig hci0 up"
if getBoxType() in ("spycat4k","spycat4kcombo","osmio4k"):
cmd = "hciattach ttyS1 qca | hciconfig hci0 up"
if getMachineBuild() in ("xc7346") or getBoxType() in ("spycat4kmini"):
cmd = "hciattach ttyS1 rtk_h5 | hciconfig hci0 up"
if getMachineBuild() in ("xc7362") or getBoxType() in ("osnino"):
cmd = "hciattach ttyS2 rtk_h5 | hciconfig hci0 up"
self.taskManager.append(cmd, self.cbPrintAvailBTDev, self.cbRunNextTask)
cmd = "hcitool dev" ## check if hci0 is on the dev list, then make scan
self.taskManager.append(cmd, self.cbPrintAvailBTDev, self.cbStopDone)
self.taskManager.next()
def getChipSetString():
if getMachineBuild() in ('dm7080','dm820'):
return "7435"
elif getMachineBuild() in ('hd51'):
return "7251S"
else:
try:
f = open('/proc/stb/info/chipset', 'r')
chipset = f.read()
f.close()
return str(chipset.lower().replace('\n','').replace('bcm','').replace('brcm','').replace('sti',''))
except IOError:
return "unavailable"
def list_files(self, PATH):
files = []
if SystemInfo["HaveMultiBoot"]:
path = PATH
if getMachineBuild() in ("hd51","vs1500","h7"):
for name in os.listdir(path):
if name != 'bootname' and os.path.isfile(os.path.join(path, name)):
try:
cmdline = self.read_startup("/boot/" + name).split("=",3)[3].split(" ",1)[0]
except IndexError:
continue
cmdline_startup = self.read_startup("/boot/STARTUP").split("=",3)[3].split(" ",1)[0]
if (cmdline != cmdline_startup) and (name != "STARTUP"):
files.append(name)
files.insert(0,"STARTUP")
elif getMachineBuild() in ("8100s"):
for name in os.listdir(path):
if name != 'bootname' and os.path.isfile(os.path.join(path, name)):
try:
cmdline = self.read_startup("/boot/" + name).split("=",4)[4].split(" ",1)[0]
except IndexError:
continue
cmdline_startup = self.read_startup("/boot/STARTUP").split("=",4)[4].split(" ",1)[0]
if (cmdline != cmdline_startup) and (name != "STARTUP"):
files.append(name)
files.insert(0,"STARTUP")
elif getMachineBuild() in ("gb7252"):
for name in os.listdir(path):
if name != 'bootname' and os.path.isfile(os.path.join(path, name)):
try:
cmdline = self.read_startup("/boot/" + name).split("=",1)[1].split(" ",1)[0]
except IndexError:
continue
cmdline_startup = self.read_startup("/boot/STARTUP").split("=",1)[1].split(" ",1)[0]
if (cmdline != cmdline_startup) and (name != "STARTUP"):
files.append(name)
files.insert(0,"STARTUP")
else:
for name in os.listdir(path):
if name != 'bootname' and os.path.isfile(os.path.join(path, name)):
try:
cmdline = self.read_startup("/boot/" + name).split("=",1)[1].split(" ",1)[0]
except IndexError:
continue
cmdline_startup = self.read_startup("/boot/cmdline.txt").split("=",1)[1].split(" ",1)[0]
if (cmdline != cmdline_startup) and (name != "cmdline.txt"):
files.append(name)
files.insert(0,"cmdline.txt")
else:
files = "None"
return files
def doBackup1(self):
print '[ImageManager] Stage1: Creating tmp folders.', self.BackupDirectory
print '[ImageManager] Stage1: Creating backup Folders.'
if path.exists(self.WORKDIR):
rmtree(self.WORKDIR)
mkdir(self.WORKDIR, 0644)
print '[ImageManager] Stage1: Create root folder.'
if path.exists(self.TMPDIR + '/root') and path.ismount(self.TMPDIR + '/root'):
system('umount ' + self.TMPDIR + '/root')
elif path.exists(self.TMPDIR + '/root'):
rmtree(self.TMPDIR + '/root')
if path.exists(self.TMPDIR):
rmtree(self.TMPDIR)
makedirs(self.TMPDIR + '/root', 0644)
makedirs(self.MAINDESTROOT, 0644)
self.commands = []
print '[ImageManager] Stage1: Making Root Image.'
makedirs(self.MAINDEST, 0644)
if self.ROOTFSTYPE == 'jffs2':
print '[ImageManager] Stage1: JFFS2 Detected.'
if getMachineBuild() == 'vuuno':
JFFS2OPTIONS = " --disable-compressor=lzo -126976 -l -p125829120"
if getMachineBuild() in ('dm800', 'dm800se','dm500hd'):
JFFS2OPTIONS = " --eraseblock=0x4000 -n -l"
else:
JFFS2OPTIONS = " --disable-compressor=lzo --eraseblock=0x20000 -n -l"
self.commands.append('mount --bind / ' + self.TMPDIR + '/root')
self.commands.append('mount -t jffs2 /dev/mtdblock/2 ' + self.TMPDIR + '/boot')
self.commands.append('mkfs.jffs2 --root=' + self.TMPDIR + '/root --faketime --output=' + self.WORKDIR + '/root.jffs2' + JFFS2OPTIONS)
if getMachineBuild() in ('dm800', 'dm800se', 'dm500hd'):
self.commands.append('mkfs.jffs2 --root=' + self.TMPDIR + '/boot --faketime --output=' + self.WORKDIR + '/boot.jffs2' + JFFS2OPTIONS)
else:
print '[ImageManager] Stage1: UBIFS Detected.'
UBINIZE = 'ubinize'
UBINIZE_ARGS = getMachineUBINIZE()
MKUBIFS_ARGS = getMachineMKUBIFS()
output = open(self.WORKDIR + '/ubinize.cfg', 'w')
output.write('[ubifs]\n')
output.write('mode=ubi\n')
output.write('image=' + self.WORKDIR + '/root.ubi\n')
output.write('vol_id=0\n')
output.write('vol_type=dynamic\n')
output.write('vol_name=rootfs\n')
output.write('vol_flags=autoresize\n')
output.close()
self.commands.append('mount --bind / ' + self.TMPDIR + '/root')
self.commands.append('touch ' + self.WORKDIR + '/root.ubi')
self.commands.append('mkfs.ubifs -r ' + self.TMPDIR + '/root -o ' + self.WORKDIR + '/root.ubi ' + MKUBIFS_ARGS)
self.commands.append('ubinize -o ' + self.WORKDIR + '/root.ubifs ' + UBINIZE_ARGS + ' ' + self.WORKDIR + '/ubinize.cfg')
self.Console.eBatch(self.commands, self.Stage1Complete, debug=False)
def getChipSetString():
if getMachineBuild() in ("dm7080", "dm820"):
return "7435"
elif getBoxType() == "blackbox7405":
return "7413"
elif getMachineBuild() in ("hd51"):
return "7251S"
else:
try:
f = open("/proc/stb/info/chipset", "r")
chipset = f.read()
f.close()
return str(chipset.lower().replace("\n", "").replace("bcm", "").replace("brcm", "").replace("sti", ""))
except IOError:
return "unavailable"
def Start_Flashing(self):
print "Start Flashing"
cmdlist = []
if os.path.exists(ofgwritePath):
text = _("Flashing: ")
if self.simulate:
text += _("Simulate (no write)")
if SystemInfo["HaveMultiBoot"]:
cmdlist.append("%s -n -r -k -m%s %s > /dev/null 2>&1" % (ofgwritePath, self.multi, flashTmp))
elif getMachineBuild() in ("u5","u5pvr"):
cmdlist.append("%s -n -r%s -k%s %s > /dev/null 2>&1" % (ofgwritePath, MTDROOTFS, MTDKERNEL, flashTmp))
else:
cmdlist.append("%s -n -r -k %s > /dev/null 2>&1" % (ofgwritePath, flashTmp))
self.close()
message = "echo -e '\n"
message += _('Show only found image and mtd partitions.\n')
message += "'"
else:
text += _("root and kernel")
if SystemInfo["HaveMultiBoot"]:
if self.List not in ("STARTUP","cmdline.txt"):
os.system('mkfs.ext4 -F ' + self.devrootfs)
cmdlist.append("%s -r -k -m%s %s > /dev/null 2>&1" % (ofgwritePath, self.multi, flashTmp))
if self.List not in ("STARTUP","cmdline.txt"):
cmdlist.append("umount -fl /oldroot_bind")
cmdlist.append("umount -fl /newroot")
elif getMachineBuild() in ("u5","u5pvr"):
cmdlist.append("%s -r%s -k%s %s > /dev/null 2>&1" % (ofgwritePath, MTDROOTFS, MTDKERNEL, flashTmp))
else:
cmdlist.append("%s -r -k %s > /dev/null 2>&1" % (ofgwritePath, flashTmp))
message = "echo -e '\n"
if self.List not in ("STARTUP","cmdline.txt") and SystemInfo["HaveMultiBoot"]:
message += _('ofgwrite flashing ready.\n')
message += _('please press exit to go back to the menu.\n')
else:
message += _('ofgwrite will stop enigma2 now to run the flash.\n')
message += _('Your STB will freeze during the flashing process.\n')
message += _('Please: DO NOT reboot your STB and turn off the power.\n')
message += _('The image or kernel will be flashing and auto booted in few minutes.\n')
if self.box() == 'gb800solo':
message += _('GB800SOLO takes about 20 mins !!\n')
message += "'"
cmdlist.append(message)
self.session.open(Console, title = text, cmdlist = cmdlist, finishedCallback = self.quit, closeOnSuccess = False)
if not self.simulate:
fbClass.getInstance().lock()
if self.List not in ("STARTUP","cmdline.txt"):
self.close()
def __init__(self):
Renderer.__init__(self)
self.PicLoad = ePicLoad()
self.PicLoad.PictureData.get().append(self.updatePicon)
self.piconsize = (0, 0)
self.pngname = ''
self.lastPath = None
if getBoxType() in ('vuultimo', 'et10000', 'mutant2400', 'quadbox2400') or getMachineBuild() in 'inihdp':
pngname = findLcdPicon('lcd_picon_default')
else:
pngname = findLcdPicon('picon_default')
self.defaultpngname = None
if not pngname:
if getBoxType() in ('vuultimo', 'et10000', 'mutant2400', 'quadbox2400') or getMachineBuild() in 'inihdp':
tmp = resolveFilename(SCOPE_ACTIVE_SKIN, 'lcd_picon_default.png')
else:
tmp = resolveFilename(SCOPE_ACTIVE_SKIN, 'picon_default.png')
if pathExists(tmp):
pngname = tmp
elif getBoxType() in ('vuultimo', 'et10000', 'mutant2400', 'quadbox2400') or getMachineBuild() in 'inihdp':
pngname = resolveFilename(SCOPE_ACTIVE_SKIN, 'lcd_picon_default.png')
else:
pngname = resolveFilename(SCOPE_ACTIVE_SKIN, 'picon_default.png')
if os.path.getsize(pngname):
self.defaultpngname = pngname
return
def profile(id):
now = time.time() - profile_start
if profile_file:
profile_file.write("%7.3f\t%s\n" % (now, id))
if id in profile_data:
t = profile_data[id]
if total_time:
perc = t * (PERCENTAGE_END - PERCENTAGE_START) / total_time + PERCENTAGE_START
else:
perc = PERCENTAGE_START
try:
if getBoxType() in ("classm", "axodin", "axodinc", "starsatlx", "evo", "genius", "galaxym6" ):
f = open("/dev/dbox/oled0", "w")
f.write("%d" % perc)
elif getBoxType() in ('gb800solo', 'gb800se', 'gb800seplus'):
f = open("/dev/mcu", "w")
f.write("%d \n" % perc)
elif getBoxType() in ("mixosf5", "gi9196m"):
f = open("/proc/progress", "w")
f.write("%d" % perc)
elif getMachineBuild() in ("inihdp", "inihdx"):
f = open("/proc/vfd", "w")
f.write("Loading %d%%" % perc)
else:
f = open("/proc/progress", "w")
f.write("%d \n" % perc)
f.close()
except IOError:
pass
def profile(id):
global profile_file
now = time.time() - profile_start
if profile_file:
profile_file.write('%7.3f\t%s\n' % (now, id))
if id in profile_data:
t = profile_data[id]
if total_time:
perc = t * (PERCENTAGE_END - PERCENTAGE_START) / total_time + PERCENTAGE_START
else:
perc = PERCENTAGE_START
try:
if boxtype in ('classm', 'axodin', 'axodinc', 'starsatlx', 'evo', 'genius', 'galaxym6'):
f = open('/dev/dbox/oled0', 'w')
f.write('%d' % perc)
elif boxtype in ('gb800solo', 'gb800se', 'gb800seplus', 'gbultrase'):
f = open('/dev/mcu', 'w')
f.write('%d \n' % perc)
elif boxtype in ('mixosf5', 'gi9196m'):
f = open('/proc/progress', 'w')
f.write('%d' % perc)
elif getMachineBuild() in ('inihdp', 'inihde2', 'inihde', 'inihdx'):
f = open('/proc/vfd', 'w')
f.write('Loading %d %%' % perc)
elif boxtype in ('amikomini', 'amiko8900', 'sognorevolution', 'arguspingulux', 'arguspinguluxmini', 'sparkreloaded', 'sabsolo', 'sparklx', 'gis8120'):
f = open('/proc/vfd', 'w')
f.write('%d \n' % perc)
else:
f = open('/proc/progress', 'w')
f.write('%d \n' % perc)
f.close()
except IOError:
pass
def updateList(self):
self.list = []
list2 = []
self.Console = Console()
self.Console.ePopen("sfdisk -l | grep swap | awk '{print $(NF-9)}' >/tmp/devices.tmp")
sleep(0.5)
f = open('/tmp/devices.tmp', 'r')
swapdevices = f.read()
f.close()
if path.exists('/tmp/devices.tmp'):
remove('/tmp/devices.tmp')
swapdevices = swapdevices.replace('\n','')
swapdevices = swapdevices.split('/')
f = open('/proc/partitions', 'r')
for line in f.readlines():
parts = line.strip().split()
if not parts:
continue
device = parts[3]
if not search('sd[a-z][1-9]',device) and not search('mmcblk[0-9]p[1-9]',device):
continue
if getMachineBuild() in ('et1x000','vuuno4k', 'vuultimo4k', 'vusolo4k', 'hd51', 'hd52', 'dm820', 'dm7080', 'sf4008', 'dm900', 'gb7252', 'dags7252', 'vs1500','h7') and search('mmcblk0p[1-9]',device):
continue
if device in list2:
continue
if device in swapdevices:
continue
self.buildMy_rec(device)
list2.append(device)
f.close()
self['config'].list = self.list
self['config'].l.setList(self.list)
self['Linconn'].hide()
def __init__(self):
Renderer.__init__(self)
VariableText.__init__(self)
if getMachineBuild() == 'inihdp':
self.stringlength = 25
else:
self.stringlength = 16
def kernelMismatch():
# returns True if a kernal mismatch is found. i.e. STB kernel does not match feeds kernel
import zlib
import re
kernelversion = about.getKernelVersionString().strip()
if kernelversion == "unknown":
print '[OnlineVersionCheck][kernelMismatch] unable to retrieve kernel version from STB'
return False
uri = "%s/%s/Packages.gz" % (getFeedsUrl(), getMachineBuild())
try:
req = urllib2.Request(uri)
d = urllib2.urlopen(req)
gz_data = d.read()
except:
print '[OnlineVersionCheck][kernelMismatch] error fetching %s' % uri
return False
try:
packages = zlib.decompress(gz_data, 16+zlib.MAX_WBITS)
except:
print '[OnlineVersionCheck][kernelMismatch] failed to decompress gz_data'
return False
pattern = "kernel-([0-9]+[.][0-9]+[.][0-9]+)"
matches = re.findall(pattern, packages)
if matches:
match = sorted(matches,key=lambda s: list(map(int, s.split('.'))))[-1]
if match != kernelversion:
print '[OnlineVersionCheck][kernelMismatch] kernel mismatch found. STB kernel=%s, feeds kernel=%s' % (kernelversion, match)
return True
print '[OnlineVersionCheck][kernelMismatch] no kernel mismatch found'
return False
def createTransCodingConfig(encoder):
if fileExists(getProcPath(encoder ,"bitrate")):
if getBoxType() in ('vusolo2') or getMachineBuild() in ('dags3', 'dags4'):
choice = ConfigSelection(default = "400000", choices=[("-1", "Auto"), ("50000", "50 Kbits"), ("100000", "100 Kbits"), ("150000", "150 Kbits"), ("200000", "200 Kbits"), ("250000", "250 Kbits"), ("300000", "300 Kbits"), ("350000", "350 Kbits"), ("400000", "400 Kbits"), ("450000", "450 Kbits"), ("500000", "500 Kbits"), ("600000", "600 Kbits"), ("700000", "700 Kbits"), ("800000", "800 Kbits"), ("900000", "900 Kbits"), ("1000000", "1 Mbits")])
elif getBoxType() in ('gbquad', 'gbquadplus'):
choice = ConfigSelection(default = "-1", choices=[("-1", "Auto"), ("50000", "50 Kbits"), ("100000", "100 Kbits"), ("150000", "150 Kbits"), ("200000", "200 Kbits"), ("250000", "250 Kbits"), ("300000", "300 Kbits"), ("350000", "350 Kbits"), ("400000", "400 Kbits"), ("450000", "450 Kbits"), ("500000", "500 Kbits"), ("600000", "600 Kbits"), ("700000", "700 Kbits"), ("800000", "800 Kbits"), ("900000", "900 Kbits"), ("1000000", "1 Mbits")])
else:
choice = ConfigSelection(default = "2000000", choices=[("-1", "Auto"), ("100000", "100 Kbits"), ("150000", "150 Kbits"), ("200000", "200 Kbits"), ("250000", "250 Kbits"), ("300000", "300 Kbits"), ("350000", "350 Kbits"), ("400000", "400 Kbits"), ("450000", "450 Kbits"), ("500000", "500 Kbits"), ("750000", "750 Kbits"), ("1000000", "1 Mbits"), ("1500000", "1.5 Mbits"), ("2000000", "2 Mbits"), ("2500000", "2.5 Mbits"), ("3000000", "3 Mbits"), ("3500000", "3.5 Mbits"), ("4000000", "4 Mbits"), ("4500000", "4.5 Mbits"), ("5000000", "5 Mbits"), ("10000000", "10 Mbits")])
config.plugins.transcodingsetup.encoder[int(encoder)].bitrate = choice
if fileExists(getProcPath(encoder ,"framerate")):
if getBoxType() in ('gbquad', 'gbquadplus'):
choice = ConfigSelection(default = "-1", choices = [("-1", "Auto"), ("23976", "23.976 fps"), ("24000", "24 fps"), ("25000", "25 fps"), ("29970", "29.970 fps")])
else:
choice = ConfigSelection(default = "50000", choices = [("-1", "Auto"), ("23976", "23.976 fps"), ("24000", "24 fps"), ("25000", "25 fps"), ("29970", "29.970 fps"), ("30000", "30 fps"), ("50000", "50 fps"), ("59940", "59.940 fps"), ("60000", "60 fps")])
config.plugins.transcodingsetup.encoder[int(encoder)].framerate = choice
if checkSupportAdvanced():
if (hasattr(config.plugins.transcodingsetup.encoder[int(encoder)], "bitrate") or hasattr(config.plugins.transcodingsetup.encoder[int(encoder)], "framerate")):
choice = ConfigSelection(default = "Off", choices = [ ("On", _("On")), ("Off", _("Off")) ])
config.plugins.transcodingsetup.encoder[int(encoder)].automode = choice
if fileExists(getProcPath(encoder, "resolution")):
resolution_choices = [("480p", _("480p")), ("576p", _("576p")), ("720p", _("720p")), ("320x240", _("320x240")), ("160x120", _("160x120"))]
if getBoxType() in ("vusolo4k"):
resolution_choices.insert(3, ("1080p", _("1080p")))
choice = ConfigSelection(default = "480p", choices=resolution_choices)
config.plugins.transcodingsetup.encoder[int(encoder)].resolution = choice
if fileExists(getProcPath(encoder, "aspectratio")):
choice = ConfigSelection(default = "2", choices = [ ("0", _("auto")), ("1", _("4x3")), ("2", _("16x9")) ])
config.plugins.transcodingsetup.encoder[int(encoder)].aspectratio = choice
if fileExists(getProcPath(encoder, "audiocodec")):
choice = ConfigSelection(default = "aac", choices = [("mpg", _("mpg")), ("mp3", _("mp3")), ("aac", _("aac")), ("aac+", _("aac+")), ("aac+loas", _("aac+loas")), ("aac+adts", _("aac+adts")), ("ac3", _("ac3"))])
config.plugins.transcodingsetup.encoder[int(encoder)].audiocodec = choice
if fileExists(getProcPath(encoder, "videocodec")):
choice = ConfigSelection(default = "h264", choices = [ ("h264", _("h264")) ])
config.plugins.transcodingsetup.encoder[int(encoder)].videocodec = choice
if fileExists(getProcPath(encoder, "gopframeb")):
choice = ConfigInteger(default = 0, limits = (0, 60))
config.plugins.transcodingsetup.encoder[int(encoder)].gopframeb = choice
if fileExists(getProcPath(encoder, "gopframep")):
choice = ConfigInteger(default = 29, limits = (0, 60))
config.plugins.transcodingsetup.encoder[int(encoder)].gopframep = choice
if fileExists(getProcPath(encoder, "level")):
choice = ConfigSelection(default = "3.1", choices = [("1.0", _("1.0")), ("2.0", _("2.0")),
("2.1", _("2.1")), ("2.2", _("2.2")), ("3.0", _("3.0")), ("3.1", _("3.1")),
("3.2", _("3.2")), ("4.0", _("4.0")), ("4.1", _("4.1")), ("4.2", _("4.2")),
("5.0", _("5.0")), ("low", _("low")), ("main", _("main")), ("high", _("high"))])
config.plugins.transcodingsetup.encoder[int(encoder)].level = choice
if fileExists(getProcPath(encoder, "profile")):
choice = ConfigSelection(default = "baseline", choices = [("baseline", _("baseline")), ("simple", _("simple")), ("main", _("main")), ("high", _("high")), ("advanced simple", _("advancedsimple"))])
config.plugins.transcodingsetup.encoder[int(encoder)].profile = choice
def keyBackup(self):
self.sel = self['list'].getCurrent()
if getMachineBuild() in ('vusolo4k','hd51','hd52'):
self.session.open(MessageBox, _("Sorry function not yet supported in this model"), MessageBox.TYPE_INFO, timeout=10)
elif self.sel:
message = _("Are you ready to create a backup image ?")
ybox = self.session.openWithCallback(self.doBackup, MessageBox, message, MessageBox.TYPE_YESNO)
ybox.setTitle(_("Backup Confirmation"))
def getlog(self):
global ocram
try:
sourcefile = 'http://feed.atemio4you.com/' + getImageVersion() + '/' + getMachineBuild() + '/' + self.logtype + '-git.log'
sourcefile,headers = urllib.urlretrieve(sourcefile)
rename(sourcefile,'/tmp/' + self.logtype + '-git.log')
fd = open('/tmp/' + self.logtype + '-git.log', 'r')
releasenotes = fd.read()
fd.close()
except:
releasenotes = '404 Not Found'
if '404 Not Found' not in releasenotes:
releasenotes = releasenotes.replace('[atemio] Release.', 'atemio: build 000')
releasenotes = releasenotes.replace('\natemio: build',"\n\natemio: build")
releasenotes = releasenotes.split('\n\n')
ver = -1
releasever = ""
viewrelease = ""
while not releasever.isdigit():
ver += 1
releasever = releasenotes[int(ver)].split('\n')
releasever = releasever[0].split(' ')
if len(releasever) > 2:
releasever = releasever[2].replace(':',"")
else:
releasever = releasever[0].replace(':',"")
if self.logtype == 'oe':
if int(getImageBuild()) == 1:
imagever = int(getImageBuild())-1
else:
imagever = int(getImageBuild())
else:
imagever = int(getImageBuild())+0
while int(releasever) > int(imagever):
if ocram:
viewrelease += releasenotes[int(ver)]+'\n'+ocram+'\n'
ocram = ""
else:
viewrelease += releasenotes[int(ver)]+'\n\n'
ver += 1
releasever = releasenotes[int(ver)].split('\n')
releasever = releasever[0].split(' ')
releasever = releasever[2].replace(':',"")
if not viewrelease and ocram:
viewrelease = ocram
ocram = ""
self["text"].setText(viewrelease)
summarytext = viewrelease.split(':\n')
try:
self['title_summary'].setText(summarytext[0]+':')
self['text_summary'].setText(summarytext[1])
except:
self['title_summary'].setText("")
self['text_summary'].setText(viewrelease)
else:
self['title_summary'].setText("")
self['text_summary'].setText(_("Error downloading change log."))
self['text'].setText(_("Error downloading change log."))
def getBlockDevInfo(self, blockdev):
devpath = "/sys/block/" + blockdev
error = False
removable = False
blacklisted = False
is_cdrom = False
partitions = []
try:
if os.path.exists(devpath + "/removable"):
removable = bool(int(readFile(devpath + "/removable")))
if os.path.exists(devpath + "/dev"):
dev = int(readFile(devpath + "/dev").split(":")[0])
else:
dev = None
if getMachineBuild() in (
"vuuno4k",
"vuultimo4k",
"vusolo4k",
"hd51",
"hd52",
"sf4008",
"dm900",
"dm7080",
"dm820",
):
devlist = [1, 7, 31, 253, 254, 179] # ram, loop, mtdblock, romblock, ramzswap, mmc
else:
devlist = [1, 7, 31, 253, 254] # ram, loop, mtdblock, romblock, ramzswap
if dev in devlist:
blacklisted = True
if blockdev[0:2] == "sr":
is_cdrom = True
if blockdev[0:2] == "hd":
try:
media = readFile("/proc/ide/%s/media" % blockdev)
if "cdrom" in media:
is_cdrom = True
except IOError:
error = True
# check for partitions
if not is_cdrom and os.path.exists(devpath):
for partition in os.listdir(devpath):
if partition[0 : len(blockdev)] != blockdev:
continue
partitions.append(partition)
else:
self.cd = blockdev
except IOError:
error = True
# check for medium
medium_found = True
try:
if os.path.exists("/dev/" + blockdev):
open("/dev/" + blockdev).close()
except IOError, err:
if err.errno == 159: # no medium present
medium_found = False
def __init__(self, session):
Screen.__init__(self, session)
self.session = session
self.selection = 0
if getMachineBuild() in ("hd51","vs1500","h7","8100s"):
self.devrootfs = "/dev/mmcblk0p3"
elif getMachineBuild() in ("gb7252"):
self.devrootfs = "/dev/mmcblk0p4"
else:
self.devrootfs = "/dev/mmcblk1p3"
self.multi = 1
self.list = self.list_files("/boot")
self.MTDKERNEL = getMachineMtdKernel()
self.MTDROOTFS = getMachineMtdRoot()
Screen.setTitle(self, _("Flash On the Fly"))
if SystemInfo["HaveMultiBoot"]:
self["key_blue"] = Button(_("Multiboot Select"))
self.read_current_multiboot()
else:
self["key_blue"] = Button(_(" "))
self["key_green"] = Button(_("Online"))
self["key_red"] = Button(_("Exit"))
self["key_yellow"] = Button(_("Local"))
self["info-local"] = Label(_("Local = Flash a image from local path /hdd/images"))
self["info-online"] = Label(_("Online = Download a image and flash it"))
self["actions"] = ActionMap(["OkCancelActions", "ColorActions"],
{
"blue": self.blue,
"yellow": self.yellow,
"green": self.green,
"red": self.quit,
"cancel": self.quit,
}, -2)
if SystemInfo["HaveMultiBoot"]:
if SystemInfo["HasRootSubdir"]:
self.multi = self.find_rootfssubdir(self.list[self.selection])
elif getMachineBuild() in ("gb7252"):
self.multi = self.read_startup("/boot/" + self.list[self.selection]).split(".",1)[1].split(":",1)[0]
else:
self.multi = self.read_startup("/boot/" + self.list[self.selection]).split(".",1)[1].split(" ",1)[0]
self.multi = self.multi[-1:]
print "[Flash Online] MULTI:",self.multi
def onMountpointRemoved(mountpoint):
if getBoxType() in ('vuultimo', 'et10000', 'mutant2400', 'quadbox2400') or getMachineBuild() in 'inihdp':
path = os.path.join(mountpoint, 'piconlcd') + '/'
else:
path = os.path.join(mountpoint, 'picon') + '/'
try:
searchPaths.remove(path)
print '[LcdPicon] removed path:', path
except:
pass
def keyResstore(self):
self.sel = self['list'].getCurrent()
if getMachineBuild() in ('vusolo4k','hd51','hd52'):
self.session.open(MessageBox, _("Sorry function not yet supported in this model - Try Image Flasher"), MessageBox.TYPE_INFO, timeout=10)
elif self.sel:
message = _("Are you sure you want to restore this image:\n ") + self.sel
ybox = self.session.openWithCallback(self.keyResstore2, MessageBox, message, MessageBox.TYPE_YESNO)
ybox.setTitle(_("Restore Confirmation"))
else:
self.session.open(MessageBox, _("You have no image to restore."), MessageBox.TYPE_INFO, timeout=10)
def backupRunning(self):
self.populate_List()
self.BackupRunning = False
for job in Components.Task.job_manager.getPendingJobs():
if job.name.startswith(_("Image Manager")):
self.BackupRunning = False
if getMachineBuild() in ('vusolo4k','hd51','hd52'):
self["key_green"].setText(_("Unavailable"))
else:
self["key_green"].setText(_("New Backup"))
self.activityTimer.startLongTimer(5)
def getChipSetString():
if getMachineBuild() in ('gb73625'):
return "BCM73625"
else:
try:
f = open('/proc/stb/info/chipset', 'r')
chipset = f.read()
f.close()
return str(chipset.lower().replace('\n','').replace('bcm','BCM').replace('brcm','BRCM').replace('sti',''))
except IOError:
return "unavailable"
def onMountpointRemoved(mountpoint): global searchPaths if getBoxType() == 'vuultimo' or getMachineBuild() == "inihdp": path = os.path.join(mountpoint, 'piconlcd') + '/' else: path = os.path.join(mountpoint, 'picon') + '/' try: searchPaths.remove(path) print "[LcdPicon] removed path:", path except: pass
def read_current_multiboot(self):
if getMachineBuild() in ("cc1","sf8008"):
if self.list[self.selection] == "Recovery":
cmdline = self.read_startup("/boot/STARTUP").split("=",1)[1].split(" ",1)[0]
else:
cmdline = self.read_startup("/boot/" + self.list[self.selection]).split("=",1)[1].split(" ",1)[0]
cmdline = cmdline.lstrip("/dev/")
self.MTDROOTFS = cmdline
self.MTDKERNEL = cmdline[:-1] + str(int(cmdline[-1:]) -1)
print "[Flash Online] kernel device: ",self.MTDKERNEL
print "[Flash Online] rootfsdevice: ",self.MTDROOTFS
def getCpuCoresString():
try:
file = open('/proc/cpuinfo', 'r')
lines = file.readlines()
for x in lines:
splitted = x.split(': ')
if len(splitted) > 1:
splitted[1] = splitted[1].replace('\n','')
if splitted[0].startswith("processor"):
if getMachineBuild() in ('u5','u51','u52','u53','u5pvr','h9','sf8008','sf8008s','sf8008t','hd60','hd61','i55plus'):
cores = 4
elif getMachineBuild() in ('u41','u42'):
cores = 2
elif int(splitted[1]) > 0:
cores = 2
else:
cores = 1
file.close()
return cores
except IOError:
return "unavailable"
def blue(self):
if SystemInfo["HaveMultiBoot"]:
self.selection = self.selection + 1
if self.selection == len(self.list):
self.selection = 0
self["key_blue"].setText(_(self.list[self.selection]))
if getMachineBuild() in ("gb7252"):
self.multi = self.read_startup("/boot/" + self.list[self.selection]).split(".",1)[1].split(":",1)[0]
self.multi = self.multi[-1:]
else:
self.multi = self.read_startup("/boot/" + self.list[self.selection]).split(".",1)[1].split(" ",1)[0]
self.multi = self.multi[-1:]
print "[Flash ESI-Online] MULTI:",self.multi
if getMachineBuild() in ("hd51","vs1500","h7"):
cmdline = self.read_startup("/boot/" + self.list[self.selection]).split("=",3)[3].split(" ",1)[0]
elif getMachineBuild() in ("8100s"):
cmdline = self.read_startup("/boot/" + self.list[self.selection]).split("=",4)[4].split(" ",1)[0]
else:
cmdline = self.read_startup("/boot/" + self.list[self.selection]).split("=",1)[1].split(" ",1)[0]
self.devrootfs = cmdline
print "[Flash ESI-Online] MULTI rootfs ", self.devrootfs
def getAboutText():
AboutText = ""
AboutText += _("Model:\t%s %s\n") % (getMachineBrand(), getMachineName())
AboutText += _("OEM Model:\t\t%s\n") % getMachineBuild()
bootloader = ""
if path.exists('/sys/firmware/devicetree/base/bolt/tag'):
f = open('/sys/firmware/devicetree/base/bolt/tag', 'r')
bootloader = f.readline().replace('\x00', '').replace('\n', '')
f.close()
AboutText += _("Bootloader:\t\t%s\n") % (bootloader)
if path.exists('/proc/stb/info/chipset'):
AboutText += _("Chipset:\t%s") % about.getChipSetString() + "\n"
cpuMHz = ""
if getMachineBuild() in ('vusolo4k', 'vuultimo4k', 'vuzero4k'):
cpuMHz = " (1,5 GHz)"
elif getMachineBuild() in ('formuler1tc', 'formuler1', 'triplex',
'tiviaraplus'):
cpuMHz = " (1,3 GHz)"
elif getMachineBuild() in ('u5', 'u53', 'u52', 'u5pvr', 'h9'):
cpuMHz = " (1,6 GHz)"
elif getMachineBuild() in ('vuuno4kse', 'vuuno4k', 'dm900', 'dm920',
'gb7252', 'dags7252', 'xc7439', '8100s'):
cpuMHz = " (1,7 GHz)"
elif getMachineBuild() in ('sf5008', 'et13000', 'et1x000', 'hd52', 'hd51',
'sf4008', 'vs1500', 'h7'):
try:
import binascii
f = open(
'/sys/firmware/devicetree/base/cpus/cpu@0/clock-frequency',
'rb')
clockfrequency = f.read()
f.close()
cpuMHz = " (%s MHz)" % str(
round(int(binascii.hexlify(clockfrequency), 16) / 1000000, 1))
except:
cpuMHz = " (1,7 GHz)"
else:
if path.exists('/proc/cpuinfo'):
f = open('/proc/cpuinfo', 'r')
temp = f.readlines()
f.close()
try:
for lines in temp:
lisp = lines.split(': ')
if lisp[0].startswith('cpu MHz'):
#cpuMHz = " (" + lisp[1].replace('\n', '') + " MHz)"
cpuMHz = " (" + str(
int(float(lisp[1].replace('\n', '')))) + " MHz)"
break
except:
pass
AboutText += _("CPU:\t%s") % about.getCPUString() + cpuMHz + "\n"
AboutText += _("Cores:\t%s") % about.getCpuCoresString() + "\n"
imagestarted = ""
bootname = ''
if path.exists('/boot/bootname'):
f = open('/boot/bootname', 'r')
bootname = f.readline().split('=')[1]
f.close()
if path.exists('/boot/STARTUP'):
f = open('/boot/STARTUP', 'r')
f.seek(22)
image = f.read(1)
f.close()
if bootname: bootname = " (%s)" % bootname
AboutText += _(
"Selected Image:\t%s") % "STARTUP_" + image + bootname + "\n"
elif path.exists('/boot/cmdline.txt'):
f = open('/boot/cmdline.txt', 'r')
f.seek(38)
image = f.read(1)
f.close()
if bootname: bootname = " (%s)" % bootname
AboutText += _(
"Selected Image:\t%s") % "STARTUP_" + image + bootname + "\n"
AboutText += _("Version:\t%s") % getImageVersion() + "\n"
AboutText += _("Build:\t%s") % getImageBuild() + "\n"
AboutText += _("Kernel:\t%s") % about.getKernelVersionString() + "\n"
string = getDriverDate()
year = string[0:4]
month = string[4:6]
day = string[6:8]
driversdate = '-'.join((year, month, day))
AboutText += _("Drivers:\t%s") % driversdate + "\n"
AboutText += _("GStreamer:\t%s") % about.getGStreamerVersionString() + "\n"
AboutText += _("Python:\t%s") % about.getPythonVersionString() + "\n"
if getMachineBuild() not in ('h9', 'vuzero4k', 'sf5008', 'et13000',
'et1x000', 'hd51', 'hd52', 'vusolo4k',
'vuuno4k', 'vuuno4kse', 'vuultimo4k',
'sf4008', 'dm820', 'dm7080', 'dm900', 'dm920',
'gb7252', 'dags7252', 'vs1500', 'h7',
'xc7439', '8100s', 'u5', 'u5pvr', 'u52',
'u53'):
AboutText += _("Installed:\t%s") % about.getFlashDateString() + "\n"
AboutText += _("Last update:\t%s") % getEnigmaVersionString() + "\n"
fp_version = getFPVersion()
if fp_version is None:
fp_version = ""
elif fp_version != 0:
fp_version = _("Frontprocessor version: %s") % fp_version
AboutText += fp_version + "\n"
tempinfo = ""
if path.exists('/proc/stb/sensors/temp0/value'):
f = open('/proc/stb/sensors/temp0/value', 'r')
tempinfo = f.read()
f.close()
elif path.exists('/proc/stb/fp/temp_sensor'):
f = open('/proc/stb/fp/temp_sensor', 'r')
tempinfo = f.read()
f.close()
elif path.exists('/proc/stb/sensors/temp/value'):
f = open('/proc/stb/sensors/temp/value', 'r')
tempinfo = f.read()
f.close()
if tempinfo and int(tempinfo.replace('\n', '')) > 0:
mark = str('\xc2\xb0')
AboutText += _("System temperature:\t%s") % tempinfo.replace(
'\n', '').replace(' ', '') + mark + "C\n"
tempinfo = ""
if path.exists('/proc/stb/fp/temp_sensor_avs'):
f = open('/proc/stb/fp/temp_sensor_avs', 'r')
tempinfo = f.read()
f.close()
elif path.exists('/sys/devices/virtual/thermal/thermal_zone0/temp'):
try:
f = open('/sys/devices/virtual/thermal/thermal_zone0/temp', 'r')
tempinfo = f.read()
tempinfo = tempinfo[:-4]
f.close()
except:
tempinfo = ""
if tempinfo and int(tempinfo.replace('\n', '')) > 0:
mark = str('\xc2\xb0')
AboutText += _("Processor temperature:\t%s") % tempinfo.replace(
'\n', '').replace(' ', '') + mark + "C\n"
AboutLcdText = AboutText.replace('\t', ' ')
return AboutText, AboutLcdText
def getBlockDevInfo(self, blockdev):
devpath = "/sys/block/" + blockdev
error = False
removable = False
BLACKLIST = []
if getMachineBuild() in ('gbmv200', 'gb7252', 'gb72604'):
BLACKLIST = ["mmcblk0"]
elif getMachineBuild() in ('dummy', ):
BLACKLIST = ["mmcblk1"]
blacklisted = False
if blockdev[:7] in BLACKLIST:
blacklisted = True
if blockdev.startswith("mmcblk") and (
re.search(r"mmcblk\dboot", blockdev)
or re.search(r"mmcblk\drpmb", blockdev)):
blacklisted = True
is_cdrom = False
bootdevice = None
partitions = []
try:
if os.path.exists('/dev/root'):
bootdevice = os.readlink('/dev/root')
if os.path.exists(devpath + "/removable"):
removable = bool(int(readFile(devpath + "/removable")))
if os.path.exists(devpath + "/dev"):
dev = readFile(devpath + "/dev")
subdev = int(dev.split(':')[1])
dev = int(dev.split(':')[0])
else:
dev = None
subdev = None
# blacklist ram, loop, mtdblock, romblock, ramzswap
blacklisted = dev in [1, 7, 31, 253, 254]
# blacklist non-root eMMC devices
if not blacklisted and dev == 179:
if subdev != 0:
blacklisted = True
elif bootdevice.startswith(blockdev):
blacklisted = True
if blockdev[0:2] == 'sr':
is_cdrom = True
if blockdev[0:2] == 'hd':
try:
media = readFile("/proc/ide/%s/media" % blockdev)
if "cdrom" in media:
is_cdrom = True
except IOError:
error = True
# check for partitions
if not is_cdrom and os.path.exists(devpath):
for partition in os.listdir(devpath):
if partition[0:len(blockdev)] != blockdev:
continue
if dev == 179 and not re.search(r"mmcblk\dp\d+",
partition):
continue
partitions.append(partition)
else:
self.cd = blockdev
except IOError:
error = True
# check for medium
medium_found = True
try:
if os.path.exists("/dev/" + blockdev):
open("/dev/" + blockdev).close()
except IOError, err:
if err.errno == 159: # no medium present
medium_found = False
from Components.Label import Label
from Components.ActionMap import ActionMap
from Components.About import about
from Components import Harddisk
from Screens.Console import Console
from Screens.MessageBox import MessageBox
from time import time, strftime, localtime
from os import path, system, makedirs, listdir, walk, statvfs, remove
import commands
import datetime
from boxbranding import getBoxType, getMachineBrand, getMachineName, getDriverDate, getImageVersion, getImageBuild, getBrandOEM, getMachineBuild, getImageFolder, getMachineUBINIZE, getMachineMKUBIFS, getMachineMtdKernel, getMachineMtdRoot, getMachineKernelFile, getMachineRootFile, getImageFileSystem
VERSION = "Version 6.2 openATV"
HaveGZkernel = True
if getMachineBuild() in ('ustym4kpro', 'hd60', 'i55plus', 'osmio4k', 'sf8008',
'cc1', 'dags72604', 'u51', 'u52', 'u53', 'h9',
'vuzero4k', 'u5', 'u5pvr', 'sf5008', 'et13000',
'et1x000', "vuuno4k", "vuuno4kse", "vuultimo4k",
"vusolo4k", "spark", "spark7162", "hd51", "hd52",
"sf4008", "dags7252", "gb7252", "vs1500", "h7",
'xc7439', '8100s'):
HaveGZkernel = False
def Freespace(dev):
statdev = statvfs(dev)
space = (statdev.f_bavail * statdev.f_frsize) / 1024
print "[FULL BACKUP] Free space on %s = %i kilobytes" % (dev, space)
return space
def doFullBackup(self, DIRECTORY):
self.DIRECTORY = DIRECTORY
self.TITLE = _("Fullbackup on %s") % (self.DIRECTORY)
self.START = time()
self.DATE = strftime("%Y%m%d_%H%M", localtime(self.START))
self.IMAGEVERSION = self.imageInfo()
if "ubi" in self.ROOTFSTYPE.split():
self.MKFS = "/usr/sbin/mkfs.ubifs"
elif "tar.bz2" in self.ROOTFSTYPE.split(
) or SystemInfo["HasMultiBootGB"]:
self.MKFS = "/bin/tar"
self.BZIP2 = "/usr/bin/bzip2"
else:
self.MKFS = "/usr/sbin/mkfs.jffs2"
self.UBINIZE = "/usr/sbin/ubinize"
self.NANDDUMP = "/usr/sbin/nanddump"
self.WORKDIR = "%s/bi" % self.DIRECTORY
self.TARGET = "XX"
## TESTING IF ALL THE TOOLS FOR THE BUILDING PROCESS ARE PRESENT
if not path.exists(self.MKFS):
text = "%s not found !!" % self.MKFS
self.session.open(MessageBox, _(text), type=MessageBox.TYPE_ERROR)
return
if not path.exists(self.NANDDUMP):
text = "%s not found !!" % self.NANDDUMP
self.session.open(MessageBox, _(text), type=MessageBox.TYPE_ERROR)
return
self.SHOWNAME = "%s %s" % (self.MACHINEBRAND, self.MODEL)
self.MAINDESTOLD = "%s/%s" % (self.DIRECTORY, self.MODEL)
self.MAINDEST = "%s/%s" % (self.DIRECTORY, self.IMAGEFOLDER)
self.EXTRA = "%s/fullbackup_%s/%s/%s" % (self.DIRECTORY, self.MODEL,
self.DATE, self.IMAGEFOLDER)
self.EXTRAOLD = "%s/fullbackup_%s/%s/%s" % (self.DIRECTORY, self.MODEL,
self.DATE, self.MODEL)
print "[ImageBackup] SHOWNAME: ", self.SHOWNAME
print "[ImageBackup] MAINDESTOLD: ", self.MAINDESTOLD
print "[ImageBackup] EXTRA: ", self.EXTRA
print "[ImageBackup] EXTRAOLD: ", self.EXTRAOLD
self.message = "echo -e '\n"
self.message += (_("Fullback for %s\n" % self.SHOWNAME)).upper()
self.message += VERSION + '\n'
self.message += "____________________________________________________\n"
self.message += _(
"Please be patient, a fullbackup will now be created.\n")
if self.ROOTFSTYPE == "ubi":
self.message += _("Due to the used filesystem, the fullbackup\n")
self.message += _(
"will take about 3-12 minutes for this system.\n")
elif SystemInfo["HasMultiBoot"] and self.list[
self.selection] == "Recovery":
self.message += _("because of the used filesystem the backup\n")
self.message += _("will take about 30 minutes for this system.\n")
elif "tar.bz2" in self.ROOTFSTYPE.split(
) or SystemInfo["HasMultiBootGB"]:
self.message += _("because of the used filesystem the backup\n")
self.message += _("will take about 1-4 minutes for this system.\n")
else:
self.message += _(
"This will take about 2-9 minutes for this system.\n")
self.message += "____________________________________________________\n"
self.message += "'"
## PREPARING THE BUILDING ENVIRONMENT
system("rm -rf %s" % self.WORKDIR)
if not path.exists(self.WORKDIR):
makedirs(self.WORKDIR)
if not path.exists("/tmp/bi/root"):
makedirs("/tmp/bi/root")
system("sync")
if SystemInfo["HasMultiBootGB"]:
system("mount /dev/%s /tmp/bi/root" % self.MTDROOTFS)
else:
system("mount --bind / /tmp/bi/root")
if "jffs2" in self.ROOTFSTYPE.split():
cmd1 = "%s --root=/tmp/bi/root --faketime --output=%s/root.jffs2 %s" % (
self.MKFS, self.WORKDIR, self.MKUBIFS_ARGS)
cmd2 = None
cmd3 = None
print "[ImageBackup] jffs2 cmd1: ", cmd1
print "[ImageBackup] jffs2 cmd2: ", cmd2
print "[ImageBackup] jffs2 cmd3: ", cmd3
elif "tar.bz2" in self.ROOTFSTYPE.split(
) or SystemInfo["HasMultiBootGB"]:
cmd1 = "%s -cf %s/rootfs.tar -C /tmp/bi/root --exclude=/var/nmbd/* ." % (
self.MKFS, self.WORKDIR)
cmd2 = "%s %s/rootfs.tar" % (self.BZIP2, self.WORKDIR)
cmd3 = None
print "[ImageBackup] tar.bz2 cmd1: ", cmd1
print "[ImageBackup] tar.bz2 cmd2: ", cmd2
print "[ImageBackup] tar.bz2 cmd3: ", cmd3
else:
f = open("%s/ubinize.cfg" % self.WORKDIR, "w")
f.write("[ubifs]\n")
f.write("mode=ubi\n")
f.write("image=%s/root.ubi\n" % self.WORKDIR)
f.write("vol_id=0\n")
f.write("vol_type=dynamic\n")
f.write("vol_name=rootfs\n")
f.write("vol_flags=autoresize\n")
f.close()
ff = open("%s/root.ubi" % self.WORKDIR, "w")
ff.close()
cmd1 = "%s -r /tmp/bi/root -o %s/root.ubi %s" % (
self.MKFS, self.WORKDIR, self.MKUBIFS_ARGS)
cmd2 = "%s -o %s/root.ubifs %s %s/ubinize.cfg" % (
self.UBINIZE, self.WORKDIR, self.UBINIZE_ARGS, self.WORKDIR)
cmd3 = "mv %s/root.ubifs %s/root.%s" % (self.WORKDIR, self.WORKDIR,
self.ROOTFSTYPE)
print "[ImageBackup] ubifs cmd1: ", cmd1
print "[ImageBackup] ubifs cmd2: ", cmd2
print "[ImageBackup] ubifs cmd3: ", cmd3
cmdlist = []
cmdlist.append(self.message)
cmdlist.append('echo "Create: rootfs dump %s\n"' % self.ROOTFSTYPE)
cmdlist.append(cmd1)
if cmd2:
cmdlist.append(cmd2)
if cmd3:
cmdlist.append(cmd3)
if self.ROOTFSBIN == "rootfs.tar.bz2":
cmdlist.append("chmod 644 %s/rootfs.%s" %
(self.WORKDIR, self.ROOTFSTYPE))
else:
cmdlist.append("chmod 644 %s/root.%s" %
(self.WORKDIR, self.ROOTFSTYPE))
if self.MODEL in ("gbquad4k", "gbue4k"):
cmdlist.append('echo " "')
cmdlist.append('echo "Create: boot dump boot.bin"')
cmdlist.append('echo " "')
cmdlist.append("dd if=/dev/mmcblk0p1 of=%s/boot.bin" %
self.WORKDIR)
cmdlist.append('echo " "')
cmdlist.append('echo "Create: rescue dump rescue.bin"')
cmdlist.append('echo " "')
cmdlist.append("dd if=/dev/mmcblk0p3 of=%s/rescue.bin" %
self.WORKDIR)
cmdlist.append('echo " "')
cmdlist.append('echo "Create: kernel dump"')
cmdlist.append('echo " "')
if SystemInfo["HasMultiBootGB"]:
cmdlist.append("dd if=/dev/%s of=%s/kernel.bin" %
(self.MTDKERNEL, self.WORKDIR))
elif self.MTDKERNEL == "mmcblk0p1" or self.MTDKERNEL == "mmcblk0p3":
cmdlist.append("dd if=/dev/%s of=%s/%s" %
(self.MTDKERNEL, self.WORKDIR, self.KERNELBIN))
else:
cmdlist.append("nanddump -a -f %s/vmlinux.gz /dev/%s" %
(self.WORKDIR, self.MTDKERNEL))
cmdlist.append('echo " "')
if HaveGZkernel:
cmdlist.append('echo "Check: kerneldump"')
cmdlist.append("sync")
if SystemInfo["HasMultiBoot"] and self.list[
self.selection] == "Recovery":
GPT_OFFSET = 0
GPT_SIZE = 1024
BOOT_PARTITION_OFFSET = int(GPT_OFFSET) + int(GPT_SIZE)
BOOT_PARTITION_SIZE = 3072
KERNEL_PARTITION_OFFSET = int(BOOT_PARTITION_OFFSET) + int(
BOOT_PARTITION_SIZE)
KERNEL_PARTITION_SIZE = 8192
ROOTFS_PARTITION_OFFSET = int(KERNEL_PARTITION_OFFSET) + int(
KERNEL_PARTITION_SIZE)
ROOTFS_PARTITION_SIZE = 819200
SECOND_KERNEL_PARTITION_OFFSET = int(
ROOTFS_PARTITION_OFFSET) + int(ROOTFS_PARTITION_SIZE)
SECOND_ROOTFS_PARTITION_OFFSET = int(
SECOND_KERNEL_PARTITION_OFFSET) + int(KERNEL_PARTITION_SIZE)
THRID_KERNEL_PARTITION_OFFSET = int(
SECOND_ROOTFS_PARTITION_OFFSET) + int(ROOTFS_PARTITION_SIZE)
THRID_ROOTFS_PARTITION_OFFSET = int(
THRID_KERNEL_PARTITION_OFFSET) + int(KERNEL_PARTITION_SIZE)
FOURTH_KERNEL_PARTITION_OFFSET = int(
THRID_ROOTFS_PARTITION_OFFSET) + int(ROOTFS_PARTITION_SIZE)
FOURTH_ROOTFS_PARTITION_OFFSET = int(
FOURTH_KERNEL_PARTITION_OFFSET) + int(KERNEL_PARTITION_SIZE)
SWAP_PARTITION_OFFSET = int(FOURTH_ROOTFS_PARTITION_OFFSET) + int(
ROOTFS_PARTITION_SIZE)
EMMC_IMAGE = "%s/disk.img" % self.WORKDIR
EMMC_IMAGE_SIZE = 3817472
IMAGE_ROOTFS_SIZE = 196608
cmdlist.append('echo " "')
cmdlist.append('echo "Create: Recovery Fullbackup disk.img"')
cmdlist.append('echo " "')
cmdlist.append('dd if=/dev/zero of=%s bs=1024 count=0 seek=%s' %
(EMMC_IMAGE, EMMC_IMAGE_SIZE))
cmdlist.append('parted -s %s mklabel gpt' % EMMC_IMAGE)
PARTED_END_BOOT = int(BOOT_PARTITION_OFFSET) + int(
BOOT_PARTITION_SIZE)
cmdlist.append(
'parted -s %s unit KiB mkpart boot fat16 %s %s' %
(EMMC_IMAGE, BOOT_PARTITION_OFFSET, PARTED_END_BOOT))
PARTED_END_KERNEL1 = int(KERNEL_PARTITION_OFFSET) + int(
KERNEL_PARTITION_SIZE)
cmdlist.append(
'parted -s %s unit KiB mkpart kernel1 %s %s' %
(EMMC_IMAGE, KERNEL_PARTITION_OFFSET, PARTED_END_KERNEL1))
PARTED_END_ROOTFS1 = int(ROOTFS_PARTITION_OFFSET) + int(
ROOTFS_PARTITION_SIZE)
cmdlist.append(
'parted -s %s unit KiB mkpart rootfs1 ext2 %s %s' %
(EMMC_IMAGE, ROOTFS_PARTITION_OFFSET, PARTED_END_ROOTFS1))
PARTED_END_KERNEL2 = int(SECOND_KERNEL_PARTITION_OFFSET) + int(
KERNEL_PARTITION_SIZE)
cmdlist.append('parted -s %s unit KiB mkpart kernel2 %s %s' %
(EMMC_IMAGE, SECOND_KERNEL_PARTITION_OFFSET,
PARTED_END_KERNEL2))
PARTED_END_ROOTFS2 = int(SECOND_ROOTFS_PARTITION_OFFSET) + int(
ROOTFS_PARTITION_SIZE)
cmdlist.append('parted -s %s unit KiB mkpart rootfs2 ext2 %s %s' %
(EMMC_IMAGE, SECOND_ROOTFS_PARTITION_OFFSET,
PARTED_END_ROOTFS2))
PARTED_END_KERNEL3 = int(THRID_KERNEL_PARTITION_OFFSET) + int(
KERNEL_PARTITION_SIZE)
cmdlist.append('parted -s %s unit KiB mkpart kernel3 %s %s' %
(EMMC_IMAGE, THRID_KERNEL_PARTITION_OFFSET,
PARTED_END_KERNEL3))
PARTED_END_ROOTFS3 = int(THRID_ROOTFS_PARTITION_OFFSET) + int(
ROOTFS_PARTITION_SIZE)
cmdlist.append('parted -s %s unit KiB mkpart rootfs3 ext2 %s %s' %
(EMMC_IMAGE, THRID_ROOTFS_PARTITION_OFFSET,
PARTED_END_ROOTFS3))
PARTED_END_KERNEL4 = int(FOURTH_KERNEL_PARTITION_OFFSET) + int(
KERNEL_PARTITION_SIZE)
cmdlist.append('parted -s %s unit KiB mkpart kernel4 %s %s' %
(EMMC_IMAGE, FOURTH_KERNEL_PARTITION_OFFSET,
PARTED_END_KERNEL4))
PARTED_END_ROOTFS4 = int(FOURTH_ROOTFS_PARTITION_OFFSET) + int(
ROOTFS_PARTITION_SIZE)
cmdlist.append('parted -s %s unit KiB mkpart rootfs4 ext2 %s %s' %
(EMMC_IMAGE, FOURTH_ROOTFS_PARTITION_OFFSET,
PARTED_END_ROOTFS4))
PARTED_END_SWAP = int(EMMC_IMAGE_SIZE) - 1024
cmdlist.append(
'parted -s %s unit KiB mkpart swap linux-swap %s %s' %
(EMMC_IMAGE, SWAP_PARTITION_OFFSET, PARTED_END_SWAP))
cmdlist.append('dd if=/dev/zero of=%s/boot.img bs=1024 count=%s' %
(self.WORKDIR, BOOT_PARTITION_SIZE))
cmdlist.append('mkfs.msdos -S 512 %s/boot.img' % self.WORKDIR)
cmdlist.append(
"echo \"boot emmcflash0.kernel1 \'brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p3 rw rootwait %s_4.boxmode=1\'\" > %s/STARTUP"
% (getMachineBuild(), self.WORKDIR))
cmdlist.append(
"echo \"boot emmcflash0.kernel1 \'brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p3 rw rootwait %s_4.boxmode=1\'\" > %s/STARTUP_1"
% (getMachineBuild(), self.WORKDIR))
cmdlist.append(
"echo \"boot emmcflash0.kernel2 \'brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p5 rw rootwait %s_4.boxmode=1\'\" > %s/STARTUP_2"
% (getMachineBuild(), self.WORKDIR))
cmdlist.append(
"echo \"boot emmcflash0.kernel3 \'brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p7 rw rootwait %s_4.boxmode=1\'\" > %s/STARTUP_3"
% (getMachineBuild(), self.WORKDIR))
cmdlist.append(
"echo \"boot emmcflash0.kernel4 \'brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p9 rw rootwait %s_4.boxmode=1\'\" > %s/STARTUP_4"
% (getMachineBuild(), self.WORKDIR))
cmdlist.append('mcopy -i %s/boot.img -v %s/STARTUP ::' %
(self.WORKDIR, self.WORKDIR))
cmdlist.append('mcopy -i %s/boot.img -v %s/STARTUP_1 ::' %
(self.WORKDIR, self.WORKDIR))
cmdlist.append('mcopy -i %s/boot.img -v %s/STARTUP_2 ::' %
(self.WORKDIR, self.WORKDIR))
cmdlist.append('mcopy -i %s/boot.img -v %s/STARTUP_3 ::' %
(self.WORKDIR, self.WORKDIR))
cmdlist.append('mcopy -i %s/boot.img -v %s/STARTUP_4 ::' %
(self.WORKDIR, self.WORKDIR))
cmdlist.append(
'dd conv=notrunc if=%s/boot.img of=%s bs=1024 seek=%s' %
(self.WORKDIR, EMMC_IMAGE, BOOT_PARTITION_OFFSET))
cmdlist.append(
'dd conv=notrunc if=/dev/%s of=%s bs=1024 seek=%s' %
(self.MTDKERNEL, EMMC_IMAGE, KERNEL_PARTITION_OFFSET))
cmdlist.append(
'dd if=/dev/%s of=%s bs=1024 seek=%s' %
(self.MTDROOTFS, EMMC_IMAGE, ROOTFS_PARTITION_OFFSET))
self.session.open(Console,
title=self.TITLE,
cmdlist=cmdlist,
finishedCallback=self.doFullBackupCB,
closeOnSuccess=True)
class AVSwitch:
hw_type = HardwareInfo().get_device_name()
has_rca = getHaveRCA() in ('True',)
has_dvi = getHaveDVI() in ('True',)
has_jack = getHaveAVJACK() in ('True',)
has_scart = getHaveSCART() in ('True',)
print "SystemInfo", "MachineBuild", getMachineBuild()
print "SystemInfo", "BoxType", getBoxType()
print "SystemInfo", "BrandOEM", getBrandOEM()
print "SystemInfo", "DisplayType", getDisplayType()
print "SystemInfo", "HaveRCA", getHaveRCA()
print "SystemInfo", "getHaveDVI", getHaveDVI()
print "SystemInfo", "HaveYUV", getHaveYUV()
print "SystemInfo", "HaveSCART", getHaveSCART()
print "SystemInfo", "HaveAVJACK", getHaveAVJACK()
print "SystemInfo", "HaveSCARTYUV", getHaveSCARTYUV()
print "SystemInfo", "HaveHDMI", getHaveHDMI()
print "SystemInfo", "MachineMtdRoot", getMachineMtdRoot()
print "VideoWizard", "has_dvi", has_dvi
print "VideoWizard", "has_rca", has_rca
print "VideoWizard", "has_jack", has_jack
print "VideoWizard", "has_scart", has_scart
print "AVSwitch", "Scart-YPbPr", SystemInfo["Scart-YPbPr"]
print "AVSwitch", "no_YPbPr", SystemInfo["no_YPbPr"]
print "AVSwitch", "yellow_RCA_no_scart", SystemInfo["yellow_RCA_no_scart"]
print "AVSwitch", "no_yellow_RCA__no_scart", SystemInfo["no_yellow_RCA__no_scart"]
rates = { } # high-level, use selectable modes.
modes = { } # a list of (high-level) modes for a certain port.
rates["PAL"] = { "50Hz": { 50: "pal" },
"60Hz": { 60: "pal60" },
"multi": { 50: "pal", 60: "pal60" } }
rates["NTSC"] = { "60Hz": { 60: "ntsc" } }
rates["Multi"] = { "multi": { 50: "pal", 60: "ntsc" } }
rates["480i"] = { "60Hz": { 60: "480i" } }
rates["576i"] = { "50Hz": { 50: "576i" } }
rates["480p"] = { "60Hz": { 60: "480p" } }
rates["576p"] = { "50Hz": { 50: "576p" } }
rates["720p"] = { "50Hz": { 50: "720p50" },
"60Hz": { 60: "720p" },
"multi": { 50: "720p50", 60: "720p" } }
rates["1080i"] = { "50Hz": { 50: "1080i50" },
"60Hz": { 60: "1080i" },
"multi": { 50: "1080i50", 60: "1080i" } }
rates["1080p"] = { "50Hz": { 50: "1080p50" },
"60Hz": { 60: "1080p" },
"multi": { 50: "1080p50", 60: "1080p" } }
rates["2160p"] = { "50Hz": { 50: "2160p50" },
"60Hz": { 60: "2160p" },
"multi": { 50: "2160p50", 60: "2160p" } }
rates["2160p30"] = { "multi": { 50: "2160p25", 60: "2160p30" } }
rates["PC"] = {
"1024x768": { 60: "1024x768" }, # not possible on DM7025
"800x600" : { 60: "800x600" }, # also not possible
"720x480" : { 60: "720x480" },
"720x576" : { 60: "720x576" },
"1280x720": { 60: "1280x720" },
"1280x720 multi": { 50: "1280x720_50", 60: "1280x720" },
"1920x1080": { 60: "1920x1080"},
"1920x1080 multi": { 50: "1920x1080", 60: "1920x1080_50" },
"1280x1024" : { 60: "1280x1024"},
"1366x768" : { 60: "1366x768"},
"1366x768 multi" : { 50: "1366x768", 60: "1366x768_50" },
"1280x768": { 60: "1280x768" },
"640x480" : { 60: "640x480" }
}
modes["Scart"] = ["PAL", "NTSC", "Multi"]
# modes["DVI-PC"] = ["PC"]
modes["HDMI"] = SystemInfo["VideoModes"][0]
widescreen_modes = SystemInfo["VideoModes"][1]
modes["YPbPr"] = modes["HDMI"]
if getBoxType() in ('dm500hd', 'dm800', 'vuuno', 'vusolo', 'vusolo2', 'vuultimo', 'vuduo', 'vuduo2'):
if SystemInfo["Scart-YPbPr"]:
modes["Scart-YPbPr"] = modes["HDMI"]
# if "DVI-PC" in modes and not getModeList("DVI-PC"):
# print "[VideoHardware] remove DVI-PC because of not existing modes"
# del modes["DVI-PC"]
if "YPbPr" in modes and SystemInfo["no_YPbPr"]:
del modes["YPbPr"]
if "Scart" in modes and SystemInfo["yellow_RCA_no_scart"]:
modes["RCA"] = modes["Scart"]
del modes["Scart"]
if "Scart" in modes and SystemInfo["no_yellow_RCA__no_scart"]:
del modes["Scart"]
def __init__(self):
self.last_modes_preferred = [ ]
self.on_hotplug = CList()
self.current_mode = None
self.current_port = None
self.readAvailableModes()
self.createConfig()
self.readPreferredModes()
def readAvailableModes(self):
try:
f = open("/proc/stb/video/videomode_choices")
modes = f.read()[:-1]
f.close()
except IOError:
print "[VideoHardware] couldn't read available videomodes."
modes = [ ]
return modes
return modes.split(' ')
def readPreferredModes(self):
try:
f = open("/proc/stb/video/videomode_preferred")
modes = f.read()[:-1]
f.close()
self.modes_preferred = modes.split(' ')
except IOError:
print "[VideoHardware] reading preferred modes failed, using all modes"
self.modes_preferred = self.readAvailableModes()
if self.modes_preferred != self.last_modes_preferred:
self.last_modes_preferred = self.modes_preferred
self.on_hotplug("HDMI") # must be HDMI
# check if a high-level mode with a given rate is available.
def isModeAvailable(self, port, mode, rate):
rate = self.rates[mode][rate]
for mode in rate.values():
if mode not in self.readAvailableModes():
return False
return True
def isWidescreenMode(self, port, mode):
return mode in self.widescreen_modes
def setMode(self, port, mode, rate, force = None):
print "[VideoHardware] setMode - port: %s, mode: %s, rate: %s" % (port, mode, rate)
# config.av.videoport.setValue(port)
# we can ignore "port"
self.current_mode = mode
self.current_port = port
modes = self.rates[mode][rate]
mode_50 = modes.get(50)
mode_60 = modes.get(60)
if mode_50 is None or force == 60:
mode_50 = mode_60
if mode_60 is None or force == 50:
mode_60 = mode_50
if os.path.exists('/proc/stb/video/videomode_50hz') and getBoxType() not in (''):
f = open("/proc/stb/video/videomode_50hz", "w")
f.write(mode_50)
f.close()
if os.path.exists('/proc/stb/video/videomode_60hz') and getBoxType() not in (''):
f = open("/proc/stb/video/videomode_60hz", "w")
f.write(mode_60)
f.close()
try:
set_mode = modes.get(int(rate[:2]))
except: # not support 50Hz, 60Hz for 1080p
set_mode = mode_50
f = open("/proc/stb/video/videomode", "w")
f.write(set_mode)
f.close()
map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3}
self.setColorFormat(map[config.av.colorformat.value])
def saveMode(self, port, mode, rate):
config.av.videoport.setValue(port)
config.av.videoport.save()
if port in config.av.videomode:
config.av.videomode[port].setValue(mode)
config.av.videomode[port].save()
if mode in config.av.videorate:
config.av.videorate[mode].setValue(rate)
config.av.videorate[mode].save()
def isPortAvailable(self, port):
# fixme
return True
def isPortUsed(self, port):
if port == "HDMI":
self.readPreferredModes()
return len(self.modes_preferred) != 0
else:
return True
def getPortList(self):
return [port for port in self.modes if self.isPortAvailable(port)]
# get a list with all modes, with all rates, for a given port.
def getModeList(self, port):
res = [ ]
for mode in self.modes[port]:
# list all rates which are completely valid
rates = [rate for rate in self.rates[mode] if self.isModeAvailable(port, mode, rate)]
# if at least one rate is ok, add this mode
if len(rates):
res.append( (mode, rates) )
return res
def createConfig(self, *args):
hw_type = HardwareInfo().get_device_name()
has_hdmi = HardwareInfo().has_hdmi()
lst = []
config.av.videomode = ConfigSubDict()
config.av.videorate = ConfigSubDict()
# create list of output ports
portlist = self.getPortList()
for port in portlist:
descr = port
if 'HDMI' in port:
lst.insert(0, (port, descr))
else:
lst.append((port, descr))
modes = self.getModeList(port)
if len(modes):
config.av.videomode[port] = ConfigSelection(choices = [mode for (mode, rates) in modes])
for (mode, rates) in modes:
config.av.videorate[mode] = ConfigSelection(choices = rates)
config.av.videoport = ConfigSelection(choices = lst)
def setInput(self, input):
INPUT = { "ENCODER": 0, "SCART": 1, "AUX": 2 }
eAVSwitch.getInstance().setInput(INPUT[input])
def setColorFormat(self, value):
if not self.current_port:
self.current_port = config.av.videoport.value
if self.current_port in ("YPbPr", "Scart-YPbPr"):
eAVSwitch.getInstance().setColorFormat(3)
elif self.current_port in ("RCA"):
eAVSwitch.getInstance().setColorFormat(0)
else:
eAVSwitch.getInstance().setColorFormat(value)
def setConfiguredMode(self):
port = config.av.videoport.value
if port not in config.av.videomode:
print "[VideoHardware] current port not available, not setting videomode"
return
mode = config.av.videomode[port].value
if mode not in config.av.videorate:
print "[VideoHardware] current mode not available, not setting videomode"
return
rate = config.av.videorate[mode].value
self.setMode(port, mode, rate)
def setAspect(self, cfgelement):
print "[VideoHardware] setting aspect: %s" % cfgelement.value
f = open("/proc/stb/video/aspect", "w")
f.write(cfgelement.value)
f.close()
def setWss(self, cfgelement):
if not cfgelement.value:
wss = "auto(4:3_off)"
else:
wss = "auto"
print "[VideoHardware] setting wss: %s" % wss
f = open("/proc/stb/denc/0/wss", "w")
f.write(wss)
f.close()
def setPolicy43(self, cfgelement):
print "[VideoHardware] setting policy: %s" % cfgelement.value
f = open("/proc/stb/video/policy", "w")
f.write(cfgelement.value)
f.close()
def setPolicy169(self, cfgelement):
if os.path.exists("/proc/stb/video/policy2"):
print "[VideoHardware] setting policy2: %s" % cfgelement.value
f = open("/proc/stb/video/policy2", "w")
f.write(cfgelement.value)
f.close()
def getOutputAspect(self):
ret = (16,9)
port = config.av.videoport.value
if port not in config.av.videomode:
print "[VideoHardware] current port not available in getOutputAspect!!! force 16:9"
else:
mode = config.av.videomode[port].value
force_widescreen = self.isWidescreenMode(port, mode)
is_widescreen = force_widescreen or config.av.aspect.value in ("16:9", "16:10")
is_auto = config.av.aspect.value == "auto"
if is_widescreen:
if force_widescreen:
pass
else:
aspect = {"16:9": "16:9", "16:10": "16:10"}[config.av.aspect.value]
if aspect == "16:10":
ret = (16,10)
elif is_auto:
try:
aspect_str = open("/proc/stb/vmpeg/0/aspect", "r").read()
if aspect_str == "1": # 4:3
ret = (4,3)
except IOError:
pass
else: # 4:3
ret = (4,3)
return ret
def getFramebufferScale(self):
aspect = self.getOutputAspect()
fb_size = getDesktop(0).size()
return aspect[0] * fb_size.height(), aspect[1] * fb_size.width()
def getAspectRatioSetting(self):
valstr = config.av.aspectratio.value
if valstr == "4_3_letterbox":
val = 0
elif valstr == "4_3_panscan":
val = 1
elif valstr == "16_9":
val = 2
elif valstr == "16_9_always":
val = 3
elif valstr == "16_10_letterbox":
val = 4
elif valstr == "16_10_panscan":
val = 5
elif valstr == "16_9_letterbox":
val = 6
return val
iAVSwitch = AVSwitch()
def InitAVSwitch():
config.av.yuvenabled = ConfigBoolean(default=True)
colorformat_choices = {"cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video")}
# when YUV is not enabled, don't let the user select it
if config.av.yuvenabled.value:
colorformat_choices["yuv"] = _("YPbPr")
config.av.autores = ConfigSelection(choices={"disabled": _("Disabled"), "all": _("All resolutions"), "hd": _("only HD")}, default="disabled")
choicelist = []
for i in range(5, 16):
choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i))
config.av.autores_label_timeout = ConfigSelection(default = "5", choices = [("0", _("Not Shown"))] + choicelist)
config.av.autores_delay = ConfigSelectionNumber(min = 0, max = 15000, stepwidth = 500, default = 500, wraparound = True)
config.av.autores_deinterlace = ConfigYesNo(default=False)
config.av.autores_sd = ConfigSelection(choices={"720p": _("720p"), "1080i": _("1080i")}, default="720p")
config.av.autores_480p24 = ConfigSelection(choices={"480p24": _("480p 24Hz"), "720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz")}, default="1080p24")
config.av.autores_720p24 = ConfigSelection(choices={"720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz")}, default="1080p24")
config.av.autores_1080p24 = ConfigSelection(choices={"1080p24": _("1080p 24Hz"), "1080p25": _("1080p 25Hz")}, default="1080p24")
config.av.autores_1080p25 = ConfigSelection(choices={"1080p25": _("1080p 25Hz"), "1080p50": _("1080p 50Hz")}, default="1080p25")
config.av.autores_1080p30 = ConfigSelection(choices={"1080p30": _("1080p 30Hz"), "1080p60": _("1080p 60Hz")}, default="1080p30")
config.av.autores_2160p24 = ConfigSelection(choices={"2160p24": _("2160p 24Hz"), "2160p25": _("2160p 25Hz"), "2160p30": _("2160p 30Hz")}, default="2160p24")
config.av.autores_2160p25 = ConfigSelection(choices={"2160p25": _("2160p 25Hz"), "2160p50": _("2160p 50Hz")}, default="2160p25")
config.av.autores_2160p30 = ConfigSelection(choices={"2160p30": _("2160p 30Hz"), "2160p60": _("2160p 60Hz")}, default="2160p30")
config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb")
config.av.aspectratio = ConfigSelection(choices={
"4_3_letterbox": _("4:3 Letterbox"),
"4_3_panscan": _("4:3 PanScan"),
"16_9": _("16:9"),
"16_9_always": _("16:9 always"),
"16_10_letterbox": _("16:10 Letterbox"),
"16_10_panscan": _("16:10 PanScan"),
"16_9_letterbox": _("16:9 Letterbox")},
default = "16_9")
config.av.aspect = ConfigSelection(choices={
"4:3": _("4:3"),
"16:9": _("16:9"),
"16:10": _("16:10"),
"auto": _("Automatic")},
default = "16:9")
policy2_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term.
"letterbox": _("Letterbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"panscan": _("Pan&scan"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect)
"scale": _("Just scale")}
if os.path.exists("/proc/stb/video/policy2_choices"):
f = open("/proc/stb/video/policy2_choices")
if "auto" in f.readline():
# TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect.
policy2_choices.update({"auto": _("Auto")})
f.close()
config.av.policy_169 = ConfigSelection(choices=policy2_choices, default = "letterbox")
policy_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term.
"panscan": _("Pillarbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"letterbox": _("Pan&scan"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right)
# "nonlinear": _("Nonlinear"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect)
"bestfit": _("Just scale")}
if os.path.exists("/proc/stb/video/policy_choices"):
f = open("/proc/stb/video/policy_choices")
if "auto" in f.readline():
# TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect.
policy_choices.update({"auto": _("Auto")})
f.close()
config.av.policy_43 = ConfigSelection(choices=policy_choices, default = "panscan")
config.av.tvsystem = ConfigSelection(choices = {"pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm")}, default="pal")
config.av.wss = ConfigEnableDisable(default = True)
config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default = 0)
config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default = 0)
config.av.vcrswitch = ConfigEnableDisable(default = False)
config.av.aspect.setValue('16:9')
config.av.aspect.addNotifier(iAVSwitch.setAspect)
config.av.wss.addNotifier(iAVSwitch.setWss)
config.av.policy_43.addNotifier(iAVSwitch.setPolicy43)
config.av.policy_169.addNotifier(iAVSwitch.setPolicy169)
def setColorFormat(configElement):
if config.av.videoport and config.av.videoport.value in ("YPbPr", "Scart-YPbPr"):
iAVSwitch.setColorFormat(3)
elif config.av.videoport and config.av.videoport.value in ("RCA"):
iAVSwitch.setColorFormat(0)
else:
map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3}
iAVSwitch.setColorFormat(map[configElement.value])
config.av.colorformat.addNotifier(setColorFormat)
def setAspectRatio(configElement):
map = {"4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox" : 6}
iAVSwitch.setAspectRatio(map[configElement.value])
iAVSwitch.setInput("ENCODER") # init on startup
SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch()
if SystemInfo["Canedidchecking"]:
def setEDIDBypass(configElement):
try:
f = open("/proc/stb/hdmi/bypass_edid_checking", "w")
f.write(configElement.value)
f.close()
except:
pass
config.av.bypass_edid_checking = ConfigSelection(choices={
"00000000": _("off"),
"00000001": _("on")},
default = "00000000")
config.av.bypass_edid_checking.addNotifier(setEDIDBypass)
else:
config.av.bypass_edid_checking = ConfigNothing()
if SystemInfo["havecolorspace"]:
def setHDMIColorspace(configElement):
try:
f = open("/proc/stb/video/hdmi_colorspace", "w")
f.write(configElement.value)
f.close()
except:
pass
if getBoxType() in ('vuzero4k','vusolo4k','vuuno4k','vuuno4kse','vuultimo4k'):
config.av.hdmicolorspace = ConfigSelection(choices={
"Edid(Auto)": _("Auto"),
"Hdmi_Rgb": _("RGB"),
"444": _("YCbCr444"),
"422": _("YCbCr422"),
"420": _("YCbCr420")},
default = "Edid(Auto)")
else:
config.av.hdmicolorspace = ConfigSelection(choices={
"auto": _("auto"),
"rgb": _("rgb"),
"420": _("420"),
"422": _("422"),
"444": _("444")},
default = "auto")
config.av.hdmicolorspace.addNotifier(setHDMIColorspace)
else:
config.av.hdmicolorspace = ConfigNothing()
if SystemInfo["havecolorimetry"]:
def setHDMIColorimetry(configElement):
try:
f = open("/proc/stb/video/hdmi_colorimetry", "w")
f.write(configElement.value)
f.close()
except:
pass
config.av.hdmicolorimetry = ConfigSelection(choices={
"Auto": _("Auto"),
"bt2020ncl": _("BT 2020 NCL"),
"bt2020cl": _("BT 2020 CL"),
"bt709": _("BT 709")},
default = "Auto")
config.av.hdmicolorimetry.addNotifier(setHDMIColorimetry)
else:
config.av.hdmicolorimetry = ConfigNothing()
if SystemInfo["haveboxmode"]:
def setBoxmode(configElement):
try:
f = open("/proc/stb/info/boxmode", "w")
f.write(configElement.value)
f.close()
except:
pass
config.av.boxmode = ConfigSelection(choices={
"12": _("PIP enabled, no HDR"),
"1": _("HDR, 12bit 4:2:0/4:2:2, no PIP")},
default = "12")
config.av.boxmode.addNotifier(setBoxmode)
else:
config.av.boxmode = ConfigNothing()
if SystemInfo["havehdmicolordepth"]:
def setHdmiColordepth(configElement):
try:
f = open("/proc/stb/video/hdmi_colordepth", "w")
f.write(configElement.value)
f.close()
except:
pass
config.av.hdmicolordepth = ConfigSelection(choices={
"auto": _("Auto"),
"8bit": _("8bit"),
"10bit": _("10bit"),
"12bit": _("12bit")},
default = "auto")
config.av.hdmicolordepth.addNotifier(setHdmiColordepth)
else:
config.av.hdmicolordepth = ConfigNothing()
if SystemInfo["Canaudiosource"]:
def setAudioSource(configElement):
try:
f = open("/proc/stb/hdmi/audio_source", "w")
f.write(configElement.value)
f.close()
except:
pass
config.av.audio_source = ConfigSelection(choices={
"pcm": _("PCM"),
"spdif": _("SPDIF")},
default="pcm")
config.av.audio_source.addNotifier(setAudioSource)
else:
config.av.audio_source = ConfigNothing()
if SystemInfo["Can3DSurround"]:
def set3DSurround(configElement):
f = open("/proc/stb/audio/3d_surround", "w")
f.write(configElement.value)
f.close()
choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))]
config.av.surround_3d = ConfigSelection(choices = choice_list, default = "none")
config.av.surround_3d.addNotifier(set3DSurround)
else:
config.av.surround_3d = ConfigNothing()
if SystemInfo["Can3DSpeaker"]:
def set3DSurroundSpeaker(configElement):
f = open("/proc/stb/audio/3d_surround_speaker_position", "w")
f.write(configElement.value)
f.close()
choice_list = [("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))]
config.av.surround_3d_speaker = ConfigSelection(choices = choice_list, default = "center")
config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker)
else:
config.av.surround_3d_speaker = ConfigNothing()
if SystemInfo["CanAutoVolume"]:
def setAutoVolume(configElement):
f = open("/proc/stb/audio/avl", "w")
f.write(configElement.value)
f.close()
choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))]
config.av.autovolume = ConfigSelection(choices = choice_list, default = "none")
config.av.autovolume.addNotifier(setAutoVolume)
else:
config.av.autovolume = ConfigNothing()
if SystemInfo["supportPcmMultichannel"]:
def setPCMMultichannel(configElement):
open("/proc/stb/audio/multichannel_pcm", "w").write(configElement.value and "enable" or "disable")
config.av.pcm_multichannel = ConfigYesNo(default = False)
config.av.pcm_multichannel.addNotifier(setPCMMultichannel)
if SystemInfo["CanDownmixAC3"]:
def setAC3Downmix(configElement):
open("/proc/stb/audio/ac3", "w").write(configElement.value and "downmix" or "passthrough")
if SystemInfo.get("supportPcmMultichannel", False) and not configElement.value:
SystemInfo["CanPcmMultichannel"] = True
else:
SystemInfo["CanPcmMultichannel"] = False
if SystemInfo["supportPcmMultichannel"]:
config.av.pcm_multichannel.setValue(False)
config.av.downmix_ac3 = ConfigYesNo(default = True)
config.av.downmix_ac3.addNotifier(setAC3Downmix)
if SystemInfo["CanDownmixDTS"]:
def setDTSDownmix(configElement):
open("/proc/stb/audio/dts", "w").write(configElement.value and "downmix" or "passthrough")
config.av.downmix_dts = ConfigYesNo(default = True)
config.av.downmix_dts.addNotifier(setDTSDownmix)
if SystemInfo["CanDownmixAAC"]:
def setAACDownmix(configElement):
open("/proc/stb/audio/aac", "w").write(configElement.value and "downmix" or "passthrough")
config.av.downmix_aac = ConfigYesNo(default = True)
config.av.downmix_aac.addNotifier(setAACDownmix)
if SystemInfo["CanAACTranscode"]:
def setAACTranscode(configElement):
open("/proc/stb/audio/aac_transcode", "w").write(configElement.value)
config.av.transcodeaac = ConfigSelection(default = "off", choices = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))])
config.av.transcodeaac.addNotifier(setAACTranscode)
else:
config.av.transcodeaac = ConfigNothing()
if SystemInfo["HasScaler_sharpness"]:
def setScaler_sharpness(config):
myval = int(config.value)
try:
print "[VideoHardware] setting scaler_sharpness to: %0.8X" % myval
f = open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w")
f.write("%0.8X" % myval)
f.close()
f = open("/proc/stb/vmpeg/0/pep_apply", "w")
f.write("1")
f.close()
except IOError:
print "[VideoHardware] couldn't write pep_scaler_sharpness"
if getBoxType() in ('gbquad', 'gbquadplus'):
config.av.scaler_sharpness = ConfigSlider(default=5, limits=(0,26))
else:
config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0,26))
config.av.scaler_sharpness.addNotifier(setScaler_sharpness)
else:
config.av.scaler_sharpness = NoSave(ConfigNothing())
config.av.edid_override = ConfigYesNo(default = False)
iAVSwitch.setConfiguredMode()
class VideomodeHotplug:
def __init__(self):
pass
def start(self):
iAVSwitch.on_hotplug.append(self.hotplug)
def stop(self):
iAVSwitch.on_hotplug.remove(self.hotplug)
def hotplug(self, what):
print "[VideoHardware] hotplug detected on port '%s'" % what
port = config.av.videoport.value
mode = config.av.videomode[port].value
rate = config.av.videorate[mode].value
if not iAVSwitch.isModeAvailable(port, mode, rate):
print "[VideoHardware] mode %s/%s/%s went away!" % (port, mode, rate)
modelist = iAVSwitch.getModeList(port)
if not len(modelist):
print "[VideoHardware] sorry, no other mode is available (unplug?). Doing nothing."
return
mode = modelist[0][0]
rate = modelist[0][1]
print "[VideoHardware] setting %s/%s/%s" % (port, mode, rate)
iAVSwitch.setMode(port, mode, rate)
hotplug = None
def startHotplug():
global hotplug
hotplug = VideomodeHotplug()
hotplug.start()
def stopHotplug():
global hotplug
hotplug.stop()
def InitiVideomodeHotplug(**kwargs):
startHotplug()
from boxbranding import getBoxType, getMachineBrand, getMachineBuild, getBrandOEM
from Tools.StbHardware import getFPVersion
import os
boxtype = getBoxType()
machinebuild = getMachineBuild()
machinebrand = getMachineBrand()
brandoem = getBrandOEM()
class RcModelOE:
def __init__(self):
pass
def rcIsDefault(self):
if self.getRcFolder() != 'dmm0':
return False
return True
def readFile(self, target):
fp = open(target, 'r')
out = fp.read()
fp.close()
return out.split()[0]
def process(self, line):
if line.lower().startswith('config.usage.rc_model='):
parts = line.split('=')
folder = parts[-1].rstrip()
if os.path.isfile('/usr/share/enigma2/rc_models/' + folder +
'/rc.png') and os.path.isfile(
def runScreenTest():
config.misc.startCounter.value += 1
config.misc.startCounter.save()
profile("readPluginList")
plugins.readPluginList(resolveFilename(SCOPE_PLUGINS))
profile("Init:Session")
nav = Navigation(config.misc.isNextRecordTimerAfterEventActionAuto.value, config.misc.isNextPowerTimerAfterEventActionAuto.value)
session = Session(desktop=enigma.getDesktop(0), summary_desktop=enigma.getDesktop(1), navigation=nav)
CiHandler.setSession(session)
screensToRun = [p.__call__ for p in plugins.getPlugins(PluginDescriptor.WHERE_WIZARD)]
profile("wizards")
screensToRun += wizardManager.getWizards()
screensToRun.append((100, InfoBar.InfoBar))
screensToRun.sort()
enigma.ePythonConfigQuery.setQueryFunc(configfile.getResolvedKey)
def runNextScreen(session, screensToRun, *result):
if result:
enigma.quitMainloop(*result)
return
screen = screensToRun[0][1]
args = screensToRun[0][2:]
if screensToRun:
session.openWithCallback(boundFunction(runNextScreen, session, screensToRun[1:]), screen, *args)
else: # FIXME: This is patently wrong. Getting screen/args would have caused an exception, if screensToRun was false
session.open(screen, *args) # FIXME: Both lines can probably be deleted.
runNextScreen(session, screensToRun)
profile("Init:VolumeControl")
vol = VolumeControl(session)
profile("Init:PowerKey")
global Screens
Screens.Standby.powerKey = power = PowerKey(session)
profile("Init:VideoResolutionKey")
resolution = VideoResolutionKey(session)
if getBoxType() in ('mixosf5', 'mixosf7', 'mixoslumi', 'gi9196m', 'maram9', 'ixussone', 'ixussone') or getMachineBuild() in ('inihde', 'inihdx'):
profile("VFDSYMBOLS")
import Components.VfdSymbols
Components.VfdSymbols.SymbolsCheck(session)
# we need session.scart to access it from within menu.xml
session.scart = AutoScartControl(session)
profile("Init:Trashcan")
import Tools.Trashcan
Tools.Trashcan.init(session)
profile("Init:AutoVideoMode")
import Screens.VideoMode
Screens.VideoMode.autostart(session)
profile("RunReactor")
profile_final()
runReactor()
profile("wakeup")
# get currentTime
nowTime = time()
if not config.misc.SyncTimeUsing.getValue() == "0" or getBoxType().startswith('gb') or getMachineProcModel().startswith('ini'):
print "dvb time sync disabled... so set RTC now to current linux time!", strftime("%a %d %b %Y %H:%M", localtime(nowTime))
setRTCtime(nowTime)
wakeupList = [
x for x in (
(session.nav.RecordTimer.getNextRecordingTime(), 0, session.nav.RecordTimer.isNextRecordAfterEventActionAuto()),
(session.nav.RecordTimer.getNextZapTime(), 1),
(plugins.getNextWakeupTime(), 2),
(session.nav.PowerTimer.getNextPowerManagerTime(), 3, session.nav.PowerTimer.isNextPowerManagerAfterEventActionAuto())
)
if x[0] != -1
]
wakeupList.sort()
recordTimerWakeupAuto = False
if wakeupList and wakeupList[0][1] != 3:
startTime = wakeupList[0]
if (startTime[0] - nowTime) < 270: # no time to switch box back on
wptime = nowTime + 30 # so switch back on in 30 seconds
else:
if getBoxType().startswith("gb"):
wptime = startTime[0] - 120 # Gigaboxes already start 2 min. before wakeup time
else:
wptime = startTime[0] - 240
# if not config.misc.SyncTimeUsing.value == "0" or getBrandOEM() == 'gigablue':
# print "dvb time sync disabled... so set RTC now to current linux time!", strftime("%a %d %b %Y %H:%M", localtime(nowTime))
# setRTCtime(nowTime)
print "set wakeup time to", strftime("%a %d %b %Y %H:%M", localtime(wptime))
setFPWakeuptime(wptime)
recordTimerWakeupAuto = startTime[1] == 0 and startTime[2]
print 'recordTimerWakeupAuto', recordTimerWakeupAuto
config.misc.isNextRecordTimerAfterEventActionAuto.value = recordTimerWakeupAuto
config.misc.isNextRecordTimerAfterEventActionAuto.save()
PowerTimerWakeupAuto = False
if wakeupList and wakeupList[0][1] == 3:
startTime = wakeupList[0]
if (startTime[0] - nowTime) < 60: # no time to switch box back on
wptime = nowTime + 30 # so switch back on in 30 seconds
else:
if getBoxType().startswith("gb"):
wptime = startTime[0] + 120 # Gigaboxes already start 2 min. before wakeup time
else:
wptime = startTime[0]
# if not config.misc.SyncTimeUsing.value == "0" or getBrandOEM() == 'gigablue':
# print "dvb time sync disabled... so set RTC now to current linux time!", strftime("%a %d %b %Y %H:%M", localtime(nowTime))
# setRTCtime(nowTime)
print "set wakeup time to", strftime("%a %d %b %Y %H:%M", localtime(wptime + 60))
setFPWakeuptime(wptime)
PowerTimerWakeupAuto = startTime[1] == 3 and startTime[2]
print 'PowerTimerWakeupAuto', PowerTimerWakeupAuto
config.misc.isNextPowerTimerAfterEventActionAuto.value = PowerTimerWakeupAuto
config.misc.isNextPowerTimerAfterEventActionAuto.save()
profile("stopService")
session.nav.stopService()
profile("nav shutdown")
session.nav.shutdown()
profile("configfile.save")
configfile.save()
from Screens import InfoBarGenerics
InfoBarGenerics.saveResumePoints()
return 0
from __future__ import print_function
import boxbranding
print("getMachineBuild=%s<" % boxbranding.getMachineBuild())
print("getMachineMake=%s<" % boxbranding.getMachineMake())
print("getMachineProcModel=%s<" % boxbranding.getMachineProcModel())
print("getMachineBrand=%s<" % boxbranding.getMachineBrand())
print("getMachineName=%s<" % boxbranding.getMachineName())
print("getMachineMtdKernel=%s<" % boxbranding.getMachineMtdKernel())
print("getMachineKernelFile=%s<" % boxbranding.getMachineKernelFile())
print("getMachineMtdRoot=%s<" % boxbranding.getMachineMtdRoot())
print("getMachineRootFile=%s<" % boxbranding.getMachineRootFile())
print("getMachineMKUBIFS=%s<" % boxbranding.getMachineMKUBIFS())
print("getMachineUBINIZE=%s<" % boxbranding.getMachineUBINIZE())
print("getBoxType=%s<" % boxbranding.getBoxType())
print("getBrandOEM=%s<" % boxbranding.getBrandOEM())
print("getOEVersion=%s<" % boxbranding.getOEVersion())
print("getDriverDate=%s<" % boxbranding.getDriverDate())
print("getImageVersion=%s<" % boxbranding.getImageVersion())
print("getImageBuild=%s<" % boxbranding.getImageBuild())
print("getImageDevBuild=%s<" % boxbranding.getImageDevBuild())
print("getImageType=%s<" % boxbranding.getImageType())
print("getImageDistro=%s<" % boxbranding.getImageDistro())
print("getImageFolder=%s<" % boxbranding.getImageFolder())
print("getImageFileSystem=%s<" % boxbranding.getImageFileSystem())
print("getImageDevBuild=%s<" % boxbranding.getImageDevBuild())
print("getImageType=%s<" % boxbranding.getImageType())
print("getMachineMake=%s<" % boxbranding.getMachineMake())
print("getImageArch=%s<" % boxbranding.getImageArch())
print("getFeedsUrl=%s<" % boxbranding.getFeedsUrl())
print("getDisplayType=%s<" % boxbranding.getDisplayType())
print("getHaveHDMI=%s<" % boxbranding.getHaveHDMI())
def __init__(self, session):
Screen.__init__(self, session)
self.setTitle(_("About"))
hddsplit = skin.parameters.get("AboutHddSplit", 0)
model = getBoxType()
procmodel = getBoxProc()
stbplatform = boxbranding.getMachineBuild()
AboutText = _("Hardware: ") + model + "\n"
if stbplatform != model:
AboutText += _("Platform: ") + stbplatform + "\n"
if procmodel != model:
AboutText += _("Proc model: ") + procmodel + "\n"
procmodeltype = getBoxProcType()
if procmodeltype is not None and procmodeltype != "unknown":
AboutText += _("Hardware type: ") + procmodeltype + "\n"
hwserial = getHWSerial()
if hwserial is not None and hwserial != "unknown":
AboutText += _("Hardware serial: ") + hwserial + "\n"
if hwserial is not None and hwserial == "unknown":
AboutText += _("Hardware serial: ") + about.getCPUSerial() + "\n"
AboutText += _("Brand/Meta: ") + getBoxBrand() + "\n"
AboutText += "\n"
cpu = about.getCPUInfoString()
AboutText += _("CPU: ") + cpu + "\n"
AboutText += _("CPU brand: ") + about.getCPUBrand() + "\n"
socfamily = boxbranding.getSoCFamily()
if socfamily is not None:
AboutText += _("SoC family: ") + socfamily + "\n"
AboutText += _("CPU architecture: ") + about.getCPUArch() + "\n"
if not boxbranding.getDisplayType().startswith(' '):
AboutText += "\n"
AboutText += _("Display type: ") + boxbranding.getDisplayType() + "\n"
# [WanWizard] Removed until we find a reliable way to determine the installation date
# AboutText += _("Installed: ") + about.getFlashDateString() + "\n"
EnigmaVersion = about.getEnigmaVersionString()
EnigmaVersion = EnigmaVersion.rsplit("-", EnigmaVersion.count("-") - 2)
if len(EnigmaVersion) == 3:
EnigmaVersion = EnigmaVersion[0] + " (" + EnigmaVersion[2] + "-" + EnigmaVersion[1] + ")"
else:
EnigmaVersion = EnigmaVersion[0] + " (" + EnigmaVersion[1] + ")"
EnigmaVersion = _("Enigma2 version: ") + EnigmaVersion
self["EnigmaVersion"] = StaticText(EnigmaVersion)
AboutText += "\n" + EnigmaVersion + "\n"
AboutText += _("Last update: ") + about.getUpdateDateString() + "\n"
AboutText += _("Enigma2 (re)starts: %d\n") % config.misc.startCounter.value
AboutText += _("Enigma2 debug level: %d\n") % eGetEnigmaDebugLvl()
if fileExists("/etc/openvision/mediaservice"):
mediaservice = open("/etc/openvision/mediaservice", "r").read().strip()
AboutText += _("Media service: ") + mediaservice.replace("enigma2-plugin-systemplugins-","") + "\n"
AboutText += "\n"
AboutText += _("Drivers version: ") + about.getDriverInstalledDate() + "\n"
AboutText += _("Kernel version: ") + boxbranding.getKernelVersion() + "\n"
GStreamerVersion = _("GStreamer version: ") + about.getGStreamerVersionString(cpu).replace("GStreamer","")
self["GStreamerVersion"] = StaticText(GStreamerVersion)
AboutText += "\n" + GStreamerVersion + "\n"
FFmpegVersion = _("FFmpeg version: ") + about.getFFmpegVersionString()
self["FFmpegVersion"] = StaticText(FFmpegVersion)
AboutText += FFmpegVersion + "\n"
AboutText += "\n"
AboutText += _("Python version: ") + about.getPythonVersionString() + "\n"
AboutText += "\n"
fp_version = getFPVersion()
if fp_version is None:
fp_version = ""
else:
fp_version = _("Frontprocessor version: %s") % fp_version
AboutText += fp_version + "\n"
self["FPVersion"] = StaticText(fp_version)
AboutText += _('Skin & Resolution: %s (%sx%s)\n') % (config.skin.primary_skin.value.split('/')[0], getDesktop(0).size().width(), getDesktop(0).size().height())
self["TunerHeader"] = StaticText(_("Detected NIMs:"))
AboutText += "\n"
AboutText += _("Detected NIMs:") + "\n"
nims = nimmanager.nimListCompressed()
for count in range(len(nims)):
if count < 4:
self["Tuner" + str(count)] = StaticText(nims[count])
else:
self["Tuner" + str(count)] = StaticText("")
AboutText += nims[count] + "\n"
self["HDDHeader"] = StaticText(_("Detected HDD:"))
AboutText += "\n"
AboutText += _("Detected HDD:") + "\n"
hddlist = harddiskmanager.HDDList()
hddinfo = ""
if hddlist:
formatstring = hddsplit and "%s:%s, %.1f %sB %s" or "%s\n(%s, %.1f %sB %s)"
for count in range(len(hddlist)):
if hddinfo:
hddinfo += "\n"
hdd = hddlist[count][1]
if int(hdd.free()) > 1024:
hddinfo += formatstring % (hdd.model(), hdd.capacity(), hdd.Totalfree()/1024.0, "G", _("free"))
else:
hddinfo += formatstring % (hdd.model(), hdd.capacity(), hdd.Totalfree(), "M", _("free"))
else:
hddinfo = _("none")
self["hddA"] = StaticText(hddinfo)
AboutText += hddinfo + "\n\n" + _("Network Info:")
for x in about.GetIPsFromNetworkInterfaces():
AboutText += "\n" + x[0] + ": " + x[1]
AboutText += '\n\n' + _("Uptime") + ": " + about.getBoxUptime()
self["AboutScrollLabel"] = ScrollLabel(AboutText)
self["key_green"] = Button(_("Translations"))
self["key_red"] = Button(_("Latest Commits"))
self["key_yellow"] = Button(_("Troubleshoot"))
self["key_blue"] = Button(_("Memory Info"))
self["actions"] = ActionMap(["ColorActions", "SetupActions", "DirectionActions"],
{
"cancel": self.close,
"ok": self.close,
"red": self.showCommits,
"green": self.showTranslationInfo,
"blue": self.showMemoryInfo,
"yellow": self.showTroubleshoot,
"up": self["AboutScrollLabel"].pageUp,
"down": self["AboutScrollLabel"].pageDown
})
def erase(self):
self.currentSelected = self["config"].l.getCurrentSelection()
if self.currentSelected[0][1] != "Queued":
if SystemInfo["HasRootSubdir"]:
message = _("Removal of this slot will not show in %s Gui. Are you sure you want to delete image slot %s ?") %(getMachineBuild(), self.currentSelected[0][1])
ybox = self.session.openWithCallback(self.doErase, MessageBox, message, MessageBox.TYPE_YESNO, default=True)
ybox.setTitle(_("Remove confirmation"))
else:
message = _("Are you sure you want to delete image slot %s ?") %self.currentSelected[0][1]
ybox = self.session.openWithCallback(self.doErase, MessageBox, message, MessageBox.TYPE_YESNO, default=True)
ybox.setTitle(_("Remove confirmation"))
self.startit()
SystemInfo["OledDisplay"] = fileExists("/dev/dbox/oled0") or getBoxType() in ('osminiplus')
SystemInfo["LcdDisplay"] = fileExists("/dev/dbox/lcd0")
SystemInfo["FBLCDDisplay"] = fileCheck("/proc/stb/fb/sd_detach")
SystemInfo["DeepstandbySupport"] = HardwareInfo().has_deepstandby()
SystemInfo["Fan"] = fileCheck("/proc/stb/fp/fan")
SystemInfo["FanPWM"] = SystemInfo["Fan"] and fileCheck("/proc/stb/fp/fan_pwm")
SystemInfo["StandbyPowerLed"] = fileExists("/proc/stb/power/standbyled")
SystemInfo["LEDButtons"] = getBoxType() == 'vuultimo'
SystemInfo["WakeOnLAN"] = fileCheck("/proc/stb/power/wol") or fileCheck("/proc/stb/fp/wol")
SystemInfo["HDMICEC"] = (fileExists("/dev/hdmi_cec") or fileExists("/dev/misc/hdmi_cec0")) and fileExists("/usr/lib/enigma2/python/Plugins/SystemPlugins/HdmiCEC/plugin.pyo")
SystemInfo["SABSetup"] = fileExists("/usr/lib/enigma2/python/Plugins/SystemPlugins/SABnzbd/plugin.pyo")
SystemInfo["SeekStatePlay"] = False
SystemInfo["GraphicLCD"] = getBoxType() in ('vuultimo', 'xpeedlx3', 'et10000', 'mutant2400', 'quadbox2400', 'sezammarvel', 'atemionemesis', 'mbultra', 'beyonwizt4')
SystemInfo["Blindscan"] = fileExists("/usr/lib/enigma2/python/Plugins/SystemPlugins/Blindscan/plugin.pyo")
SystemInfo["Satfinder"] = fileExists("/usr/lib/enigma2/python/Plugins/SystemPlugins/Satfinder/plugin.pyo")
SystemInfo["HasExternalPIP"] = getMachineBuild() not in ('et9x00', 'et6x00', 'et5x00') and fileCheck("/proc/stb/vmpeg/1/external")
SystemInfo["hasPIPVisibleProc"] = fileCheck("/proc/stb/vmpeg/1/visible")
SystemInfo["VideoDestinationConfigurable"] = fileExists("/proc/stb/vmpeg/0/dst_left")
SystemInfo["GBWOL"] = fileExists("/usr/bin/gigablue_wol")
SystemInfo["LCDSKINSetup"] = path.exists("/usr/share/enigma2/display")
SystemInfo["VFD_scroll_repeats"] = fileCheck("/proc/stb/lcd/scroll_repeats")
SystemInfo["VFD_scroll_delay"] = fileCheck("/proc/stb/lcd/scroll_delay")
SystemInfo["VFD_initial_scroll_delay"] = fileCheck("/proc/stb/lcd/initial_scroll_delay")
SystemInfo["VFD_final_scroll_delay"] = fileCheck("/proc/stb/lcd/final_scroll_delay")
SystemInfo["LCDMiniTV"] = fileExists("/proc/stb/lcd/mode")
SystemInfo["LCDMiniTVPiP"] = SystemInfo["LCDMiniTV"] and getBoxType() != 'gb800ueplus'
SystemInfo["LcdLiveTV"] = fileCheck("/proc/stb/fb/sd_detach") or fileCheck("/proc/stb/lcd/live_enable")
SystemInfo["LcdLiveTVPiP"] = fileCheck("/proc/stb/lcd/live_decoder")
SystemInfo["MiniTV"] = fileCheck("/proc/stb/fb/sd_detach") or fileCheck("/proc/stb/lcd/live_enable")
SystemInfo["FastChannelChange"] = False
SystemInfo["CIHelper"] = fileExists("/usr/bin/cihelper")
or fileExists("/dev/misc/hdmi_cec0")) and fileExists(
"/usr/lib/enigma2/python/Plugins/SystemPlugins/HdmiCEC/plugin.pyo")
SystemInfo["SABSetup"] = fileExists(
"/usr/lib/enigma2/python/Plugins/SystemPlugins/SABnzbd/plugin.pyo")
SystemInfo["SeekStatePlay"] = False
SystemInfo["StatePlayPause"] = False
SystemInfo["StandbyState"] = False
SystemInfo["GraphicLCD"] = getBoxType() in ('vuultimo', 'xpeedlx3', 'et10000',
'mutant2400', 'quadbox2400',
'sezammarvel', 'atemionemesis',
'mbultra', 'beyonwizt4')
SystemInfo["Blindscan"] = fileExists(
"/usr/lib/enigma2/python/Plugins/SystemPlugins/Blindscan/plugin.pyo")
SystemInfo["Satfinder"] = fileExists(
"/usr/lib/enigma2/python/Plugins/SystemPlugins/Satfinder/plugin.pyo")
SystemInfo["HasExternalPIP"] = getMachineBuild() not in (
'et9x00', 'et6x00', 'et5x00') and fileCheck("/proc/stb/vmpeg/1/external")
SystemInfo["hasPIPVisibleProc"] = fileCheck("/proc/stb/vmpeg/1/visible")
SystemInfo["VideoDestinationConfigurable"] = fileExists(
"/proc/stb/vmpeg/0/dst_left")
SystemInfo["GBWOL"] = fileExists("/usr/bin/gigablue_wol")
SystemInfo["LCDSKINSetup"] = path.exists("/usr/share/enigma2/display")
SystemInfo["7segment"] = getDisplayType() in ('7segment')
SystemInfo["grautec"] = fileExists("/tmp/usbtft")
SystemInfo["isGBIPBOX"] = fileExists("/usr/lib/enigma2/python/gbipbox.so")
SystemInfo["CIHelper"] = fileExists("/usr/bin/cihelper")
SystemInfo["3DMode"] = fileCheck("/proc/stb/fb/3dmode") or fileCheck(
"/proc/stb/fb/primary/3d")
SystemInfo["3DZNorm"] = fileCheck("/proc/stb/fb/znorm") or fileCheck(
"/proc/stb/fb/primary/zoffset")
SystemInfo["CanUse3DModeChoices"] = fileExists(
or model.startswith('et7')) and pathExists('/proc/stb/ir/rc/type')
SystemInfo["HasFullHDSkinSupport"] = model not in ("et4000", "et5000", "sh1",
"hd500c", "hd1100",
"xp1000", "lc", "sf8")
SystemInfo["HasBypassEdidChecking"] = fileCheck(
"/proc/stb/hdmi/bypass_edid_checking")
SystemInfo["HasColorspace"] = fileCheck("/proc/stb/video/hdmi_colorspace")
SystemInfo["HasColorspaceSimple"] = SystemInfo[
"HasColorspace"] and model in "vusolo4k"
SystemInfo["HasMultichannelPCM"] = fileCheck(
"/proc/stb/audio/multichannel_pcm")
SystemInfo["HasMMC"] = "root" in cmdline and cmdline["root"].startswith(
"/dev/mmcblk")
SystemInfo["HaveMultiBoot"] = (fileCheck("/boot/STARTUP")
or fileCheck("/boot/cmdline.txt"))
SystemInfo["HaveMultiBootDS"] = fileCheck("/boot/STARTUP") and getMachineBuild(
) in ('cc1', 'sf8008') and fileCheck("/dev/sda")
SystemInfo["CommonInterfaceCIDelay"] = fileCheck("/proc/stb/tsmux/rmx_delay")
SystemInfo["HasTranscoding"] = pathExists("/proc/stb/encoder/0") or fileCheck(
"/dev/bcm_enc0")
SystemInfo["HasH265Encoder"] = fileHas("/proc/stb/encoder/0/vcodec_choices",
"h265")
SystemInfo["CanNotDoSimultaneousTranscodeAndPIP"] = model in "vusolo4k"
SystemInfo["HasColordepth"] = fileCheck("/proc/stb/video/hdmi_colordepth")
SystemInfo["HasFrontDisplayPicon"] = model in ("vusolo4k", "et8500")
SystemInfo["Has24hz"] = fileCheck("/proc/stb/video/videomode_24hz")
SystemInfo["Has2160p"] = fileHas("/proc/stb/video/videomode_preferred",
"2160p50")
SystemInfo["HasHDMIpreemphasis"] = fileCheck("/proc/stb/hdmi/preemphasis")
SystemInfo["HasColorimetry"] = fileCheck("/proc/stb/video/hdmi_colorimetry")
SystemInfo["HasHdrType"] = fileCheck("/proc/stb/video/hdmi_hdrtype")
SystemInfo["HasHDMI-CEC"] = HardwareInfo().has_hdmi() and fileExists(
def __init__(self, session):
Screen.__init__(self, session)
self.skinName = "Standby"
self.avswitch = AVSwitch()
print "[Standby] enter standby"
SystemInfo["StandbyState"] = True
self["actions"] = ActionMap(
["StandbyActions"], {
"power": self.Power,
"power_make": self.Power_make,
"power_break": self.Power_break,
"power_long": self.Power_long,
"power_repeat": self.Power_repeat,
"discrete_on": self.Power
}, -1)
globalActionMap.setEnabled(False)
self.ignoreKeyBreakTimer = eTimer()
self.standbyStopServiceTimer = eTimer()
self.standbyStopServiceTimer.callback.append(self.stopService)
self.timeHandler = None
#mute adc
self.setMute()
if SystemInfo["Display"] and SystemInfo["LCDMiniTV"]:
# set LCDminiTV off
setLCDModeMinitTV("0")
self.paused_service = None
self.prev_running_service = None
self.prev_running_service = self.session.nav.getCurrentlyPlayingServiceOrGroup(
)
service = self.prev_running_service and self.prev_running_service.toString(
)
if service:
if service.startswith("1:") and service.rsplit(
":", 1)[1].startswith("/"):
self.paused_service = self.session.current_dialog
self.paused_service.pauseService()
if not self.paused_service:
self.timeHandler = eDVBLocalTimeHandler.getInstance()
if self.timeHandler.ready():
if self.session.nav.getCurrentlyPlayingServiceOrGroup():
self.stopService()
else:
self.standbyStopServiceTimer.startLongTimer(5)
self.timeHandler = None
else:
self.timeHandler.m_timeUpdated.get().append(self.stopService)
if self.session.pipshown:
from Screens.InfoBar import InfoBar
InfoBar.instance and hasattr(
InfoBar.instance, "showPiP") and InfoBar.instance.showPiP()
#set input to vcr scart
if SystemInfo["ScartSwitch"]:
self.avswitch.setInput("SCART")
else:
self.avswitch.setInput("AUX")
if (getBrandOEM() in ('fulan', 'clap', 'dinobot') or getMachineBuild()
in ('gbmv200', 'sf8008', 'sf8008m', 'ustym4kpro', 'beyonwizv2',
'viper4k')):
try:
open("/proc/stb/hdmi/output", "w").write("off")
except:
pass
if int(
config.usage.hdd_standby_in_standby.value
) != -1: # HDD standby timer value (box in standby) / -1 = same as when box is active
for hdd in harddiskmanager.HDDList():
hdd[1].setIdleTime(
int(config.usage.hdd_standby_in_standby.value))
self.onFirstExecBegin.append(self.__onFirstExecBegin)
self.onClose.append(self.__onClose)
def save(self):
print "[MultiBootStartup] select new startup: ", self.list[
self.selection]
ret = system("cp -f '/boot/%s' /boot/STARTUP" %
self.list[self.selection])
if ret:
self.session.open(
MessageBox,
_("File '/boot/%s' copy to '/boot/STARTUP' failed!") %
self.list[self.selection], MessageBox.TYPE_ERROR)
self.getCurrent()
return
writeoption = already = failboot = False
newboot = boot = self.readlineFile('/boot/STARTUP')
if self.checkBootEntry(boot):
failboot = True
elif self.option_enabled:
for x in self.optionsList:
if (x[0] + "'" in boot or x[0] + " "
in boot) and x[0] != self.optionsList[self.option][0]:
newboot = boot.replace(x[0],
self.optionsList[self.option][0])
if self.optionsList[self.option][0] == "boxmode=1":
newboot = newboot.replace("520M@248M", "440M@328M")
newboot = newboot.replace("200M@768M", "192M@768M")
elif self.optionsList[self.option][0] == "boxmode=12":
newboot = newboot.replace("440M@328M", "520M@248M")
newboot = newboot.replace("192M@768M", "200M@768M")
writeoption = True
break
elif (x[0] + "'" in boot or x[0] + " "
in boot) and x[0] == self.optionsList[self.option][0]:
already = True
break
if not (writeoption or already):
if "boxmode" in boot:
failboot = True
elif self.option:
newboot = boot.replace(
"rootwait", "rootwait %s_4.%s" %
(getMachineBuild(), self.optionsList[self.option][0]))
if self.optionsList[self.option][0] == "boxmode=1":
newboot = newboot.replace("520M@248M", "440M@328M")
newboot = newboot.replace("200M@768M", "192M@768M")
elif self.optionsList[self.option][0] == "boxmode=12":
newboot = newboot.replace("440M@328M", "520M@248M")
newboot = newboot.replace("192M@768M", "200M@768M")
writeoption = True
if self.enable_bootnamefile:
if failboot:
self.writeFile('/boot/bootname', 'STARTUP_1=STARTUP_1')
else:
self.writeFile(
'/boot/bootname',
'%s=%s' % ('STARTUP_%s' % getMachineBuild(), boot[22:23],
self.list[self.selection]))
message = _("Do you want to reboot now with selected image?")
if failboot:
print "[MultiBootStartup] wrong bootsettings: " + boot
if '/dev/mmcblk0p3' in Harddisk.getextdevices("ext4"):
if self.writeFile(
'/boot/STARTUP',
"boot emmcflash0.kernel1 'brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p3 rw rootwait'"
):
txt = _("Next boot will start from Image 1.")
else:
txt = _("Can not repair file %s") % (
"'/boot/STARTUP'") + "\n" + _(
"Caution, next boot is starts with these settings!"
) + "\n"
else:
txt = _(
"Alternative Image 1 partition for boot repair not found."
) + "\n" + _(
"Caution, next boot is starts with these settings!") + "\n"
message = _("Wrong Bootsettings detected!") + "\n\n%s\n\n%s\n" % (
boot, txt) + _("Do you want to reboot now?")
elif writeoption:
if not self.writeFile('/boot/STARTUP', newboot):
txt = _("Can not write file %s") % (
"'/boot/STARTUP'") + "\n" + _(
"Caution, next boot is starts with these settings!"
) + "\n"
message = _("Write error!") + "\n\n%s\n\n%s\n" % (
boot, txt) + _("Do you want to reboot now?")
#verify boot
if failboot or writeoption:
boot = self.readlineFile('/boot/STARTUP')
if self.checkBootEntry(boot):
txt = _("Error in file %s") % ("'/boot/STARTUP'") + "\n" + _(
"Caution, next boot is starts with these settings!") + "\n"
message = _("Command line error!") + "\n\n%s\n\n%s\n" % (
boot, txt) + _("Do you want to reboot now?")
self.session.openWithCallback(self.restartBOX, MessageBox, message,
MessageBox.TYPE_YESNO)
def runScreenTest():
config.misc.startCounter.value += 1
profile("readPluginList")
plugins.readPluginList(resolveFilename(SCOPE_PLUGINS))
profile("Init:Session")
nav = Navigation(config.misc.nextWakeup.value)
#nav = Navigation(config.misc.isNextRecordTimerAfterEventActionAuto.value, config.misc.isNextPowerTimerAfterEventActionAuto.value)
session = Session(desktop=enigma.getDesktop(0),
summary_desktop=enigma.getDesktop(1),
navigation=nav)
CiHandler.setSession(session)
profile("wizards")
screensToRun = []
RestoreSettings = None
if os.path.exists("/media/hdd/images/config/settings"
) and config.misc.firstrun.value:
if autorestoreLoop():
RestoreSettings = True
from Plugins.SystemPlugins.SoftwareManager.BackupRestore import RestoreScreen
os.system("rm /media/hdd/images/config/settings")
session.open(RestoreScreen, runRestore=True)
else:
os.system("rm /media/hdd/images/config/settings")
screensToRun = [
p.__call__
for p in plugins.getPlugins(PluginDescriptor.WHERE_WIZARD)
]
screensToRun += wizardManager.getWizards()
else:
if os.path.exists("/media/hdd/images/config/autorestore"):
os.system('rm -f /media/hdd/images/config/autorestore')
screensToRun = [
p.__call__
for p in plugins.getPlugins(PluginDescriptor.WHERE_WIZARD)
]
screensToRun += wizardManager.getWizards()
screensToRun.append((100, InfoBar.InfoBar))
screensToRun.sort()
print screensToRun
enigma.ePythonConfigQuery.setQueryFunc(configfile.getResolvedKey)
def runNextScreen(session, screensToRun, *result):
config.easysetup = ConfigSubsection()
config.easysetup.restart = ConfigBoolean(default=False)
if config.easysetup.restart.value == True:
print "restart after Wizard2"
config.easysetup.restart.setValue(False)
config.easysetup.restart.save()
enigma.quitMainloop(3)
if result:
print "[mytest.py] quitMainloop #3"
enigma.quitMainloop(*result)
return
screen = screensToRun[0][1]
args = screensToRun[0][2:]
if screensToRun:
session.openWithCallback(
boundFunction(runNextScreen, session, screensToRun[1:]),
screen, *args)
else:
session.open(screen, *args)
if not RestoreSettings:
runNextScreen(session, screensToRun)
profile("Init:VolumeControl")
vol = VolumeControl(session)
profile("Init:PowerKey")
power = PowerKey(session)
power.timerstdby()
if boxtype in (
'alien5', 'osninopro', 'osnino', 'osninoplus', 'alphatriple',
'spycat4kmini', 'tmtwin4k', 'mbmicrov2', 'revo4k', 'force3uhd',
'wetekplay', 'wetekplay2', 'wetekhub', 'dm7020hd', 'dm7020hdv2',
'osminiplus', 'osmega', 'sf3038', 'spycat', 'e4hd', 'e4hdhybrid',
'mbmicro', 'et7500', 'mixosf5', 'mixosf7', 'mixoslumi', 'gi9196m',
'maram9', 'ixussone', 'ixusszero', 'uniboxhd1', 'uniboxhd2',
'uniboxhd3', 'sezam5000hd', 'mbtwin', 'sezam1000hd', 'mbmini',
'atemio5x00', 'beyonwizt3', '9910lx', '9911lx',
'9920lx') or getBrandOEM() in ('fulan') or getMachineBuild() in (
'u41', 'dags7362', 'dags73625', 'dags5', 'ustym4kpro',
'sf8008', 'sf8008m', 'cc1', 'gbmv200'):
profile("VFDSYMBOLS")
import Components.VfdSymbols
Components.VfdSymbols.SymbolsCheck(session)
# we need session.scart to access it from within menu.xml
session.scart = AutoScartControl(session)
profile("Init:Trashcan")
import Tools.Trashcan
Tools.Trashcan.init(session)
profile("Init:AutoVideoMode")
import Screens.VideoMode
Screens.VideoMode.autostart(session)
profile("RunReactor")
profile_final()
if boxtype in ('sf8', 'classm', 'axodin', 'axodinc', 'starsatlx', 'genius',
'evo'):
f = open("/dev/dbox/oled0", "w")
f.write('-E2-')
f.close()
print "lastshutdown=%s (True = last shutdown was OK)" % config.usage.shutdownOK.value
print "NOK shutdown action=%s" % config.usage.shutdownNOK_action.value
print "bootup action=%s" % config.usage.boot_action.value
if not config.usage.shutdownOK.value and not config.usage.shutdownNOK_action.value == 'normal' or not config.usage.boot_action.value == 'normal':
print "last shutdown = %s" % config.usage.shutdownOK.value
import Screens.PowerLost
Screens.PowerLost.PowerLost(session)
config.usage.shutdownOK.setValue(False)
config.usage.shutdownOK.save()
if not RestoreSettings:
configfile.save()
# kill showiframe if it is running (sh4 hack...)
if getMachineBuild() in ('spark', 'spark7162'):
os.system("killall -9 showiframe")
runReactor()
print "[mytest.py] normal shutdown"
config.misc.startCounter.save()
config.usage.shutdownOK.setValue(True)
config.usage.shutdownOK.save()
profile("wakeup")
#get currentTime
nowTime = time()
if not config.misc.SyncTimeUsing.value == "0" or getBoxType().startswith(
'gb') or getMachineProcModel().startswith('ini'):
print "dvb time sync disabled... so set RTC now to current linux time!", strftime(
"%Y/%m/%d %H:%M", localtime(nowTime))
setRTCtime(nowTime)
wakeupList = [
x for x in (
(session.nav.RecordTimer.getNextRecordingTime(), 0,
session.nav.RecordTimer.isNextRecordAfterEventActionAuto()),
(session.nav.RecordTimer.getNextZapTime(),
1), (plugins.getNextWakeupTime(), 2),
(session.nav.PowerTimer.getNextPowerManagerTime(), 3,
session.nav.PowerTimer.isNextPowerManagerAfterEventActionAuto()))
if x[0] != -1
]
wakeupList.sort()
recordTimerWakeupAuto = False
if wakeupList and wakeupList[0][1] != 3:
startTime = wakeupList[0]
if (startTime[0] - nowTime) < 270: # no time to switch box back on
wptime = nowTime + 30 # so switch back on in 30 seconds
else:
if getBoxType().startswith("gb"):
wptime = startTime[
0] - 120 # Gigaboxes already starts 2 min. before wakeup time
else:
wptime = startTime[0] - 240
if startTime[1] == 3:
nextPluginName = " (%s)" % nextPluginName
#if not config.misc.SyncTimeUsing.value == "0" or getBoxType().startswith('gb'):
# print "dvb time sync disabled... so set RTC now to current linux time!", strftime("%Y/%m/%d %H:%M", localtime(nowTime))
# setRTCtime(nowTime)
print "set wakeup time to", strftime("%Y/%m/%d %H:%M",
localtime(wptime))
setFPWakeuptime(wptime)
recordTimerWakeupAuto = startTime[1] == 0 and startTime[2]
print 'recordTimerWakeupAuto', recordTimerWakeupAuto
config.misc.isNextRecordTimerAfterEventActionAuto.value = recordTimerWakeupAuto
config.misc.isNextRecordTimerAfterEventActionAuto.save()
PowerTimerWakeupAuto = False
if wakeupList and wakeupList[0][1] == 3:
startTime = wakeupList[0]
if (startTime[0] - nowTime) < 60: # no time to switch box back on
wptime = nowTime + 30 # so switch back on in 30 seconds
else:
if getBoxType().startswith("gb"):
wptime = startTime[
0] + 120 # Gigaboxes already starts 2 min. before wakeup time
else:
wptime = startTime[0]
#if not config.misc.SyncTimeUsing.value == "0" or getBoxType().startswith('gb'):
# print "dvb time sync disabled... so set RTC now to current linux time!", strftime("%Y/%m/%d %H:%M", localtime(nowTime))
# setRTCtime(nowTime)
print "set wakeup time to", strftime("%Y/%m/%d %H:%M",
localtime(wptime + 60))
setFPWakeuptime(wptime)
PowerTimerWakeupAuto = startTime[1] == 3 and startTime[2]
print 'PowerTimerWakeupAuto', PowerTimerWakeupAuto
config.misc.isNextPowerTimerAfterEventActionAuto.value = PowerTimerWakeupAuto
config.misc.isNextPowerTimerAfterEventActionAuto.save()
profile("stopService")
session.nav.stopService()
profile("nav shutdown")
session.nav.shutdown()
profile("configfile.save")
configfile.save()
from Screens import InfoBarGenerics
InfoBarGenerics.saveResumePoints()
return 0
from Components.Label import Label
from Components.ActionMap import ActionMap
from Components.About import about
from Components import Harddisk
from Screens.Console import Console
from Screens.MessageBox import MessageBox
from time import time, strftime, localtime
from os import path, system, makedirs, listdir, walk, statvfs, remove
import commands
import datetime
from boxbranding import getBoxType, getMachineBrand, getMachineName, getDriverDate, getImageVersion, getImageBuild, getBrandOEM, getMachineBuild, getImageFolder, getMachineUBINIZE, getMachineMKUBIFS, getMachineMtdKernel, getMachineMtdRoot, getMachineKernelFile, getMachineRootFile, getImageFileSystem
VERSION = _("Version") + " 6.2 openATV"
HaveGZkernel = True
if getMachineBuild() in ('multibox', 'vuduo4k', 'v8plus', 'ustym4kpro', 'hd60',
'hd61', 'i55plus', 'osmio4k', 'sf8008', 'sf8008s',
'sf8008t', 'cc1', 'dags72604', 'u51', 'u52', 'u53',
'u54', 'u55', 'h9', 'h9combo', 'vuzero4k', 'u5',
'u5pvr', 'sf5008', 'et13000', 'et1x000', "vuuno4k",
"vuuno4kse", "vuultimo4k", "vusolo4k", "spark",
"spark7162", "hd51", "hd52", "sf4008", "dags7252",
"gb7252", "vs1500", "h7", 'xc7439', '8100s'):
HaveGZkernel = False
def Freespace(dev):
statdev = statvfs(dev)
space = (statdev.f_bavail * statdev.f_frsize) / 1024
print "[FULL BACKUP] Free space on %s = %i kilobytes" % (dev, space)
return space
from Components.Label import Label
from Components.ActionMap import ActionMap
from Components.About import about
from Components import Harddisk
from Screens.Console import Console
from Screens.MessageBox import MessageBox
from time import time, strftime, localtime
from os import path, system, makedirs, listdir, walk, statvfs
import commands
import datetime
from boxbranding import getBoxType, getMachineBrand, getMachineName, getDriverDate, getImageVersion, getImageBuild, getBrandOEM, getMachineBuild, getImageFolder, getMachineUBINIZE, getMachineMKUBIFS, getMachineMtdKernel, getMachineMtdRoot, getMachineKernelFile, getMachineRootFile, getImageFileSystem
VERSION = "Version 1.0 teamBlue"
HaveGZkernel = True
if getMachineBuild() in ("vusolo4k", "spark", "spark7162", "hd51", "hd52",
"gb7252"):
HaveGZkernel = False
def Freespace(dev):
statdev = statvfs(dev)
space = (statdev.f_bavail * statdev.f_frsize) / 1024
print "[ImageBackup] Free space on %s = %i kilobytes" % (dev, space)
return space
class ImageBackup(Screen):
skin = """
<screen position="center,center" size="560,400" title="Image Backup">
<ePixmap position="0,360" zPosition="1" size="140,40" pixmap="skin_default/buttons/red.png" transparent="1" alphatest="on" />
def getAboutText():
AboutText = ""
AboutText += _("Model:\t\t%s %s\n") % (getMachineBrand(), getMachineName())
AboutText += _("OEM Model:\t\t%s\n") % getMachineBuild()
bootloader = ""
if path.exists('/sys/firmware/devicetree/base/bolt/tag'):
f = open('/sys/firmware/devicetree/base/bolt/tag', 'r')
bootloader = f.readline().replace('\x00', '').replace('\n', '')
f.close()
AboutText += _("Bootloader:\t\t%s\n") % (bootloader)
if path.exists('/proc/stb/info/chipset'):
AboutText += _("Chipset:\t\t%s") % about.getChipSetString() + "\n"
cpuMHz = ""
if getMachineBuild() in ('u41', 'u42', 'u43'):
cpuMHz = _(" (1.0 GHz)")
elif getMachineBuild() in ('dags72604', 'vusolo4k', 'vuultimo4k',
'vuzero4k', 'gb72604'):
cpuMHz = _(" (1.5 GHz)")
elif getMachineBuild() in ('formuler1tc', 'formuler1', 'triplex',
'tiviaraplus'):
cpuMHz = _(" (1.3 GHz)")
elif getMachineBuild() in ('gbmv200', 'u51', 'u5', 'u53', 'u532', 'u533',
'u52', 'u54', 'u55', 'u56', 'u5pvr', 'h9',
'h9combo', 'h10', 'cc1', 'sf8008', 'sf8008m',
'hd60', 'hd61', 'i55plus', 'ustym4kpro',
'beyonwizv2', 'viper4k', 'v8plus', 'multibox'):
cpuMHz = _(" (1.6 GHz)")
elif getMachineBuild() in ('vuuno4kse', 'vuuno4k', 'dm900', 'dm920',
'gb7252', 'dags7252', 'xc7439', '8100s'):
cpuMHz = _(" (1.7 GHz)")
elif getMachineBuild() in ('alien5', ):
cpuMHz = _(" (2.0 GHz)")
elif getMachineBuild() in ('vuduo4k', ):
cpuMHz = _(" (2.1 GHz)")
elif getMachineBuild() in ('sf5008', 'et13000', 'et1x000', 'hd52', 'hd51',
'sf4008', 'vs1500', 'h7', 'osmio4k',
'osmio4kplus', 'osmini4k'):
try:
import binascii
f = open(
'/sys/firmware/devicetree/base/cpus/cpu@0/clock-frequency',
'rb')
clockfrequency = f.read()
f.close()
cpuMHz = _(" (%s MHz)") % str(
round(int(binascii.hexlify(clockfrequency), 16) / 1000000, 1))
except:
cpuMHz = _(" (1.7 GHz)")
else:
if path.exists('/proc/cpuinfo'):
f = open('/proc/cpuinfo', 'r')
temp = f.readlines()
f.close()
try:
for lines in temp:
lisp = lines.split(': ')
if lisp[0].startswith('cpu MHz'):
#cpuMHz = " (" + lisp[1].replace('\n', '') + " MHz)"
cpuMHz = " (" + str(
int(float(lisp[1].replace('\n', '')))) + " MHz)"
break
except:
pass
AboutText += _("CPU:\t\t%s") % about.getCPUString() + cpuMHz + "\n"
AboutText += _("Cores:\t\t%s") % about.getCpuCoresString() + "\n"
imagestarted = ""
bootname = ''
if path.exists('/boot/bootname'):
f = open('/boot/bootname', 'r')
bootname = f.readline().split('=')[1]
f.close()
if SystemInfo["canMultiBoot"]:
slot = image = GetCurrentImage()
bootmode = ""
part = _("eMMC slot %s") % slot
if SystemInfo["canMode12"]:
bootmode = _("bootmode = %s") % GetCurrentImageMode()
if SystemInfo["HasHiSi"] and "sda" in SystemInfo["canMultiBoot"][slot][
'device']:
if slot > 4:
image -= 4
else:
image -= 1
part = "SDcard slot %s (%s) " % (
image, SystemInfo["canMultiBoot"][slot]['device'])
AboutText += _("Selected Image:\t\t%s") % _("STARTUP_") + str(
slot) + " " + part + " " + bootmode + "\n"
AboutText += _("Version:\t\t%s") % getImageVersion() + "\n"
AboutText += _("Build:\t\t%s") % getImageBuild() + "\n"
AboutText += _("Kernel:\t\t%s") % about.getKernelVersionString() + "\n"
string = getDriverDate()
year = string[0:4]
month = string[4:6]
day = string[6:8]
driversdate = '-'.join((year, month, day))
AboutText += _("Drivers:\t\t%s") % MyDateConverter(driversdate) + "\n"
AboutText += _(
"GStreamer:\t\t%s") % about.getGStreamerVersionString() + "\n"
AboutText += _("Python:\t\t%s") % about.getPythonVersionString() + "\n"
MyFlashDate = about.getFlashDateString()
if MyFlashDate != _("unknown"):
AboutText += _("Installed:\t\t%s") % MyFlashDate + "\n"
AboutText += _("Last update:\t\t%s") % MyDateConverter(
getEnigmaVersionString()) + "\n"
fp_version = getFPVersion()
if fp_version is None:
fp_version = ""
elif fp_version != 0:
fp_version = _("Frontprocessor version: %s") % fp_version
AboutText += fp_version + "\n"
tempinfo = ""
if path.exists('/proc/stb/sensors/temp0/value'):
f = open('/proc/stb/sensors/temp0/value', 'r')
tempinfo = f.read()
f.close()
elif path.exists('/proc/stb/fp/temp_sensor'):
f = open('/proc/stb/fp/temp_sensor', 'r')
tempinfo = f.read()
f.close()
elif path.exists('/proc/stb/sensors/temp/value'):
f = open('/proc/stb/sensors/temp/value', 'r')
tempinfo = f.read()
f.close()
if tempinfo and int(tempinfo.replace('\n', '')) > 0:
mark = str('\xc2\xb0')
AboutText += _("System temperature:\t%s") % tempinfo.replace(
'\n', '').replace(' ', '') + mark + "C\n"
tempinfo = ""
if path.exists('/proc/stb/fp/temp_sensor_avs'):
f = open('/proc/stb/fp/temp_sensor_avs', 'r')
tempinfo = f.read()
f.close()
elif path.exists('/proc/stb/power/avs'):
f = open('/proc/stb/power/avs', 'r')
tempinfo = f.read()
f.close()
elif path.exists('/sys/devices/virtual/thermal/thermal_zone0/temp'):
try:
f = open('/sys/devices/virtual/thermal/thermal_zone0/temp', 'r')
tempinfo = f.read()
tempinfo = tempinfo[:-4]
f.close()
except:
tempinfo = ""
elif path.exists('/proc/hisi/msp/pm_cpu'):
try:
for line in open('/proc/hisi/msp/pm_cpu').readlines():
line = [x.strip() for x in line.strip().split(":")]
if line[0] in ("Tsensor"):
temp = line[1].split("=")
temp = line[1].split(" ")
tempinfo = temp[2]
if getMachineBuild() in ('u41', 'u42', 'u43'):
tempinfo = str(int(tempinfo) - 15)
except:
tempinfo = ""
if tempinfo and int(tempinfo.replace('\n', '')) > 0:
mark = str('\xc2\xb0')
AboutText += _("Processor temperature:\t%s") % tempinfo.replace(
'\n', '').replace(' ', '') + mark + "C\n"
AboutLcdText = AboutText.replace('\t', ' ')
return AboutText, AboutLcdText
from Components.Label import Label
from Components.ActionMap import ActionMap
from Components.About import about
from Components import Harddisk
from Screens.Console import Console
from Screens.MessageBox import MessageBox
from time import time, strftime, localtime
from os import path, system, makedirs, listdir, walk, statvfs, remove
import commands
import datetime
from boxbranding import getBoxType, getMachineBrand, getMachineName, getDriverDate, getImageVersion, getImageBuild, getBrandOEM, getMachineBuild, getImageFolder, getMachineUBINIZE, getMachineMKUBIFS, getMachineMtdKernel, getMachineMtdRoot, getMachineKernelFile, getMachineRootFile, getImageFileSystem
VERSION = "Version 6.1 SFteam"
HaveGZkernel = True
if getMachineBuild() in ('h9', 'vuzero4k', 'u5', 'u5pvr', 'sf5008', 'et13000',
'et1x000', "vuuno4k", "vuuno4kse", "vuultimo4k",
"vusolo4k", "spark", "spark7162", "hd51", "hd52",
"sf4008", "dags7252", "gb7252", "vs1500", "h7",
'xc7439', '8100s'):
HaveGZkernel = False
def Freespace(dev):
statdev = statvfs(dev)
space = (statdev.f_bavail * statdev.f_frsize) / 1024
print "[FULL BACKUP] Free space on %s = %i kilobytes" % (dev, space)
return space
class ImageBackup(Screen):
