class sms:
def __init__(self, rx, tx):
self._uart = UART(baudrate=9600, rx=rx, tx=tx)
# Perform self check
if not self._check():
... # TODO replace this with a buzz or something
self._report()
# TODO indicate sim setup complete
def _send(self, cmd: str) -> str:
self._uart.write(bytes((cmd+"\r\n").encode("ascii")))
sleep_ms(SEND_DELAY_MS)
resp = self._uart.read()
if resp is None:
return ""
return resp.decode("ascii")
def _check(self) -> bool:
if "ok" not in self._send("at"):
return False
if "error" in self._send("at+ccid"):
return False
if "error" in self._send("at+creg?"):
return False
return True
# Report will send commands to the sim800l and collect the responses.
# Then the responses will be sent via sms to the "owner"
def _report(self):
rep = ""
rep += self._send("at+csq") # signal strength
rep += self._send("AT+COPS?") # connected network
rep += self._send("AT+CBC") # lipo state
self.send_msg(rep)
def send_msg(self, msg: str):
self._send("AT+CMGF=1") # Text message mode
self._send(f"AT+CMGS=\"{OWNER_NUMBER}\"")
self._send(msg)
self._uart.write(bytes(chr(26)))
def recv_msg(self) -> str:
self._send("AT+CMGF=1") # Text message mode
self._send("AT+CNMI=1,2,0,0,0") # Send text message over uart
resp = ""
while resp == "" or "+CMT" not in resp:
resp = self._uart.read()
if resp == None:
resp = ""
msg = resp.decode("ascii")
words = msg.split("\r\n")
return words[2]
'''
https://circuitpython.readthedocs.io/en/2.x/shared-bindings/busio/UART.html
connect D3 and D4 to test
'''
import board
from busio import UART
uart = UART(board.D4, board.D3)
uart.write('test')
uart.read(4)
uart.write('test2\n')
uart.readline() # reads until a \n character
class sms:
def __init__(self, rx, tx):
self._uart = UART(baudrate=57600, rx=rx, tx=tx)
self.pkt_size = 0
def _send(self, cmd: str) -> str:
self._uart.write(bytes((cmd + "\r\n").encode("ascii")))
sleep_ms(SEND_DELAY_MS)
resp = self._uart.read()
if resp is None:
return ""
return resp.decode("ascii")
# Report will send commands to the sim800l and collect the responses.
# Then the responses will be sent via sms to the "owner"
def report(self):
rep = ""
rep += self._send("at")
rep += self._send("at+ccid")
rep += self._send("at+creg?")
rep += self._send("at+csq") # signal strength
rep += self._send("AT+COPS?") # connected network
rep += self._send("AT+CBC") # lipo state
self.send_msg(rep)
def send_msg(self, msg: str, number=OWNER_NUMBER):
self._send("AT+CMGF=1") # Text message mode
self._send(f"AT+CMGS=\"{number}\"")
self._send(msg)
self._uart.write(bytes(chr(26).encode("ascii")))
def send_msg_all(self, msg: str):
for num in NUMBERS:
self.send_msg(msg, num)
sleep_ms(5000)
def recv_msg(self, indicator=None) -> str:
self._send("AT+CMGF=1") # Text message mode
self._send("AT+CNMI=1,2,0,0,0") # Send text message over uart
resp = "\r\n\r\n"
while "+CMT" not in resp:
if indicator is not None:
indicator.toggle()
resp = self._uart.read()
if resp is None:
resp = "\r\n\r\n"
else:
indicator.on()
resp = resp.decode("ascii")
words = resp.split("\r\n")
return words[2]
def connect(self):
self._send("AT+CFUN=1")
self._send("AT+CSTT=\"wap.vodafone.co.uk\",\"wap\",\"wap\"")
self._send("AT+CIICR")
sleep_ms(200)
self._send("AT+CIFSR")
self._send("AT+CIPSTART=\"UDP\",35.229.97.111,8080")
sleep_ms(2000)
#Returns the number of milliseconds that need to be waited
#This will have some gaps though, especially when sending a new packet
def send_pkt(self, pkt: bytes) -> int:
if self.pkt_size == 0:
self._uart.write(
bytes((f"AT+CIPSEND={MAX_PKT_SIZE}\r\na").encode("ascii")))
return 4
self._uart.write(pkt)
self.pkt_size += len(pkt)
if self.pkt_size >= MAX_PKT_SIZE:
self._uart.write(bytes("\r\n".encode("ascii")))
return 3
return 1
def disconnect(self):
self._send("AT+CIPCLOSE")
self._send("AT+CIPSHUT")
import board
from busio import UART
import utime
FONA_BAUD = 4800
uart = UART(board.D0, board.D2,
baudrate=FONA_BAUD) # for UART2 on esp32 dev board, RX:16, TX:17
uart.init(FONA_BAUD)
# clear the buffer
for i in range(3):
uart.readline()
# check replies
for i in range(10):
message = "AT"
uart.write(message + '\r\n') # \r and \n seem necessary
print(">>\n" + message)
utime.sleep(.1)
response = uart.read().decode('ascii')
print("<<")
print(response.split())
utime.sleep(.1)