def ApplySurfaceToText(self, surface, surfaces_written):
if not surface in surfaces_written:
surfaces_written[surface] = True
tris = geom.Stl()
for solid in surface.solids:
o = cad.GetObjectFromId(cad.OBJECT_TYPE_STL_SOLID, solid)
tris += o.GetTris(surface.tolerance)
# name the stl file
import tempfile
temp_filename = tempfile.gettempdir(
) + '/surface%d.stl' % self.number_for_stl_file
self.number_for_stl_file += 1
# write stl file
tris.WriteStl(temp_filename)
import attach
import ocl_funcs
attach.units = self.units
attach.attach_begin()
import nc.nc
nc.nc.creator.stl = ocl_funcs.STLSurfFromFile(temp_filename)
nc.nc.creator.minz = -10000.0
nc.nc.creator.material_allowance = surface.material_allowance
wx.GetApp().attached_to_surface = surface
def MakeGCode(self):
wx.GetApp().attached_to_surface = None
self.number_for_stl_file = 1
wx.GetApp().tool_number = 0
# import the relevant machine
machine_module = __import__('nc.' + self.machine.post,
fromlist=['dummy'])
import importlib
importlib.reload(machine_module)
output(self.GetOutputFileName())
program_begin(self.GetID(), self.GetTitle())
absolute()
if self.units > 25.0:
imperial()
else:
metric()
set_plane(0)
if self.path_control_mode != PATH_CONTROL_UNDEFINED:
set_path_control_mode(self.path_control_mode,
self.motion_blending_tolerance,
self.naive_cam_tolerance)
for tool in self.tools.GetChildren():
tool.DoGCodeCalls()
surfaces_written = {}
patterns_written = {}
for op in self.operations.GetChildren():
if op.active:
surface = cad.GetObjectFromId(Surface.type, op.surface)
if surface != None: import attach
surface_apply_before_pattern = (
surface !=
None) and not surface.same_for_each_pattern_position
surface_apply_after_pattern = (
surface != None) and surface.same_for_each_pattern_position
if surface_apply_before_pattern:
self.ApplySurfaceToText(surface, surfaces_written)
tranform_begun = self.ApplyPatternToText(
op.pattern, patterns_written)
if surface_apply_after_pattern:
self.ApplySurfaceToText(surface, surfaces_written)
failure = op.DoGCodeCalls()
if surface_apply_after_pattern: attach.attach_end()
if tranform_begun: transform.transform_end()
if surface_apply_before_pattern: attach.attach_end()
wx.GetApp().attached_to_surface = None
if failure:
wx.MessageBox(failure)
cad.Select(op)
return
program_end()
def GetBoxWithInvisibles(self):
self.box = geom.Box3D()
# return the box around all the solids
for solid in self.solids:
object = cad.GetObjectFromId(cad.OBJECT_TYPE_STL_SOLID, solid)
if object:
self.box.InsertBox(object.GetBox())
return self.box
def ApplyPatternToText(self, p, patterns_written):
pattern = cad.GetObjectFromId(Pattern.type, p)
if pattern != None:
# write a transform redirector
import transform
transform.transform_begin(pattern.GetMatrices())
return True
return False
def OnGlCommands(self, select, marked, no_color):
if marked and not select:
tool = Tool.FindTool(self.tool_number)
if tool == None:
return
radius = tool.CuttingRadius(True)
global circle_sketch
global arc1
global arc2
# get 3d position from the point objects, sorted by distance from camera
forwards = wx.GetApp(
).frame.graphics_canvas.viewport.view_point.Forwards()
lens_point = wx.GetApp(
).frame.graphics_canvas.viewport.view_point.lens_point
posns = []
for point in self.points:
object = cad.GetObjectFromId(cad.OBJECT_TYPE_POINT, point)
if object == None:
continue
pos = object.GetStartPoint()
dotp = (lens_point - pos) * forwards
posns.append(DotpAndPos(dotp, pos))
posns = sorted(posns)
for dotp_and_pos in posns:
pos = dotp_and_pos.pos
p0 = pos + geom.Point3D(-radius, 0, 0)
p1 = pos + geom.Point3D(radius, 0, 0)
if circle_sketch == None:
circle_sketch = cad.NewSketch()
arc1 = cad.NewArc(p0, p1, geom.Point3D(0, 0, 1), pos)
arc2 = cad.NewArc(p1, p0, geom.Point3D(0, 0, 1), pos)
circle_sketch.Add(arc1)
circle_sketch.Add(arc2)
else:
arc1.SetStartPoint(p0)
arc1.SetEndPoint(p1)
arc1.SetCentrePoint(pos)
arc2.SetStartPoint(p1)
arc2.SetEndPoint(p0)
arc2.SetCentrePoint(pos)
cad.Material(cad.Color(255, 255, 0)).glMaterial(1.0)
cad.DrawEnableLighting()
cad.DrawDisableDepthTesting()
cad.DrawEnableCullFace()
cad.Sketch.RenderAsExtrusion(circle_sketch, self.start_depth,
self.final_depth)
cad.DrawDisableCullFace()
cad.DrawEnableDepthTesting()
cad.DrawDisableLighting()
def OnGlCommands(self, select, marked, no_color):
if marked and not select:
object = cad.GetObjectFromId(cad.OBJECT_TYPE_SKETCH, self.sketch)
if object != None:
cad.Material(cad.Color(255, 255, 0)).glMaterial(1.0)
cad.DrawEnableLighting()
#cad.DrawDisableDepthTesting()
cad.DrawEnableCullFace()
cad.Sketch.RenderAsExtrusion(object, self.start_depth, self.final_depth)
cad.DrawDisableCullFace()
#cad.DrawEnableDepthTesting()
cad.DrawDisableLighting()
def SetSketchOrderAndCombo(self, s):
self.order = cad.SketchOrderType.SketchOrderTypeUnknown
sketch = cad.GetObjectFromId(cad.OBJECT_TYPE_SKETCH, s)
if sketch and sketch.GetType() == cad.OBJECT_TYPE_SKETCH:
self.order = sketch.GetSketchOrder()
if self.order == cad.SketchOrderType.SketchOrderTypeOpen:
self.cmbToolOnSide.SetString(0, 'Left')
self.cmbToolOnSide.SetString(1, 'Right')
elif self.order == cad.SketchOrderType.SketchOrderTypeCloseCW or self.order == cad.SketchOrderType.SketchOrderTypeCloseCCW:
self.cmbToolOnSide.SetString(0, 'Outside')
self.cmbToolOnSide.SetString(1, 'Inside')
else:
self.cmbToolOnSide.SetString(0, 'Outside or Left')
self.cmbToolOnSide.SetString(1, 'Inside or Right')
def GetCurveFromSketch(sketch_id):
sketch_file_path = tempfile.gettempdir() + '/sketch.dxf'
sketch = cad.GetObjectFromId(cad.OBJECT_TYPE_SKETCH, sketch_id)
if sketch == None:
return
else:
sketch.WriteDxf(sketch_file_path)
area = geom.AreaFromDxf(sketch_file_path)
curves = area.GetCurves()
if len(curves) > 0:
curve = curves[0]
if curve.NumVertices() > 1:
if curve.FirstVertex().p.x > curve.LastVertex().p.x:
curve.Reverse()
return curve
return None
def DoEachSketch(self, callback, data):
# data is a tuple, whatever you want to pass on
# callback gets called for each separate sketch
object = cad.GetObjectFromId(cad.OBJECT_TYPE_SKETCH, self.sketch)
if object != None:
if object.GetType() == cad.OBJECT_TYPE_SKETCH:
re_ordered_sketch = None
sketch_order = object.GetSketchOrder()
if sketch_order == cad.SketchOrderType.SketchOrderTypeBad:
re_ordered_sketch = object.MakeACopy()
re_ordered_sketch.ReOrderSketch(cad.SketchOrderType.SketchOrderTypeReOrder)
object = re_ordered_sketch
sketch_order = object.GetSketchOrder()
if (sketch_order == cad.SketchOrderType.SketchOrderTypeMultipleCurves) or (sketch_order == cad.SketchOrderType.SketchOrderHasCircles):
new_separate_sketches = object.Split()
for one_curve_sketch in new_separate_sketches:
callback(one_curve_sketch, data)
else:
callback(object, data)
def DoGCodeCalls(self):
failure = self.CheckToolExists()
if failure: return failure
tool = Tool.FindTool(self.tool_number)
depth_params = self.GetDepthParams()
tool_diameter = tool.CuttingRadius(True) * 2.0
SpeedOp.DoGCodeCalls(self)
for point in self.points:
object = cad.GetObjectFromId(cad.OBJECT_TYPE_POINT, point)
pos = object.GetEndPoint()
drill(x=pos.x / wx.GetApp().program.units,
y=pos.y / wx.GetApp().program.units,
dwell=self.dwell,
depthparams=depth_params,
retract_mode=self.retract_mode,
spindle_mode=self.spindle_mode,
internal_coolant_on=self.internal_coolant_on,
rapid_to_clearance=self.rapid_to_clearance)
end_canned_cycle()
def GetProperties(self):
properties = []
sketch_order = cad.SketchOrderType.SketchOrderTypeUnknown
sketch_object = cad.GetObjectFromId(cad.OBJECT_TYPE_SKETCH,
self.sketch)
if sketch_object != None:
sketch_order = sketch_object.GetSketchOrder()
choices = []
if sketch_order == cad.SketchOrderType.SketchOrderTypeOpen:
choices.append('Left')
choices.append('Right')
elif sketch_order == cad.SketchOrderType.SketchOrderTypeCloseCW or sketch_order == cad.SketchOrderType.SketchOrderTypeCloseCCW:
choices.append('Outside')
choices.append('Inside')
else:
choices.append('Outside or Left')
choices.append('Inside or Right')
choices.append('On')
choice = 0
if self.tool_on_side == PROFILE_RIGHT_OR_INSIDE:
choice = 1
elif self.tool_on_side == PROFILE_LEFT_OR_OUTSIDE:
choice = 2
properties.append(
PyChoiceProperty("Tool On Side",
'tool_on_side',
choices,
self,
alternative_values=[
PROFILE_LEFT_OR_OUTSIDE,
PROFILE_RIGHT_OR_INSIDE, PROFILE_ON
]))
properties.append(
PyChoiceProperty("Cut Mode", 'cut_mode', ['Conventional', 'Climb'],
self))
properties.append(PyProperty("Auto Roll On", 'auto_roll_on', self))
properties.append(PyProperty("Roll On Point", 'roll_on_point', self))
properties.append(PyProperty("Auto Roll Off", 'auto_roll_off', self))
properties.append(PyProperty("Roll Off Point", 'roll_off_point', self))
properties.append(
PyPropertyLength("Roll Radius", 'auto_roll_radius', self))
properties.append(PyProperty("Use Start Point", 'start_given', self))
properties.append(PyProperty("Start Point", 'start', self))
properties.append(PyProperty("Use End Point", 'end_given', self))
properties.append(PyProperty("End Point", 'end', self))
properties.append(
PyProperty("End Beyond Full Profile", 'end_beyond_full_profile',
self))
properties.append(
PyPropertyLength("Extend Before Start", 'extend_at_start', self))
properties.append(
PyPropertyLength("Extend Past End", 'extend_at_end', self))
properties.append(
PyPropertyLength("Lead In Line Length", 'lead_in_line_len', self))
properties.append(
PyPropertyLength("Lead Out Line Length", 'lead_out_line_len',
self))
properties.append(
PyPropertyLength("Offset Extra", 'offset_extra', self))
properties.append(
PyProperty("Do Finishing Pass", 'do_finishing_pass', self))
properties.append(
PyProperty("Only Finishing Pass", 'only_finishing_pass', self))
properties.append(
PyProperty("Finishing Feed Rate", 'finishing_h_feed_rate', self))
properties.append(
PyChoiceProperty("Finish Cut Mode", 'finishing_cut_mode',
['Conventional', 'Climb'], self))
properties.append(
PyPropertyLength("Finishing Step Down", 'finishing_step_down',
self))
properties += SketchOp.GetProperties(self)
return properties