def bar(width, thick, diameter, tolerance, amount=0, stem=1, twist=False, tneck=0.5, tthick=0.01, twist_keep=False,
twist_line=False, twist_line_amount=2, which='MF'):
# width = length of the bar
# thick = thickness of the bar
# diameter = diameter of the tool for joint creation
# tolerance = Tolerance in the joint
# amount = amount of fingers in the joint 0 means auto generate
# stem = amount of radius the stem or neck of the joint will have
# twist = twist lock addition
# tneck = percentage the twist neck will have compared to thick
# tthick = thicknest of the twist material
# Which M,F, MF, MM, FF
global DT
if amount == 0:
amount = round(thick / ((4 + 2 * (stem - 1)) * diameter * DT)) - 1
bpy.ops.curve.simple(align='WORLD', location=(0, 0, 0), rotation=(0, 0, 0), Simple_Type='Rectangle',
Simple_width=width, Simple_length=thick, use_cyclic_u=True, edit_mode=False)
simple.active_name('tmprect')
fingers(diameter, tolerance, amount, stem=stem)
if which == 'MM' or which == 'M' or which == 'MF':
simple.rename('fingers', '_tmpfingers')
simple.rotate(-math.pi / 2)
simple.move(x=width / 2)
simple.rename('tmprect', '_tmprect')
simple.union('_tmp')
simple.active_name("tmprect")
twistm('tmprect', thick, diameter, tolerance, twist, tneck, tthick, -math.pi / 2,
x=width / 2, twist_keep=twist_keep)
twistf('receptacle', thick, diameter, tolerance, twist, tneck, tthick, twist_keep=twist_keep)
simple.rename('receptacle', '_tmpreceptacle')
if which == 'FF' or which == 'F' or which == 'MF':
simple.rotate(-math.pi / 2)
simple.move(x=-width / 2)
simple.rename('tmprect', '_tmprect')
simple.difference('_tmp', '_tmprect')
simple.active_name("tmprect")
if twist_keep:
simple.make_active('twist_keep_f')
simple.rotate(-math.pi / 2)
simple.move(x=-width / 2)
simple.remove_multiple("_") # Remove temporary base and holes
simple.remove_multiple("fingers") # Remove temporary base and holes
if twist_line:
joinery.twist_line(thick, tthick, tolerance, tneck, twist_line_amount, width)
if twist_keep:
simple.duplicate()
simple.active_name('tmptwist')
simple.difference('tmp', 'tmprect')
simple.rename('tmprect', 'Puzzle_bar')
simple.remove_multiple("tmp") # Remove temporary base and holes
simple.make_active('Puzzle_bar')
def arcbararc(length, radius, thick, angle, angleb, diameter, tolerance, amount=0, stem=1, twist=False,
tneck=0.5, tthick=0.01, which='MF', twist_keep=False, twist_line=False, twist_line_amount=2):
# length is the total width of the segments including 2 * radius and thick
# radius = radius of the curve
# thick = thickness of the bar
# angle = angle of the female part
# angleb = angle of the male part
# diameter = diameter of the tool for joint creation
# tolerance = Tolerance in the joint
# amount = amount of fingers in the joint 0 means auto generate
# stem = amount of radius the stem or neck of the joint will have
# twist = twist lock addition
# tneck = percentage the twist neck will have compared to thick
# tthick = thicknest of the twist material
# which = which joint to generate, Male Female MaleFemale M, F, MF
length -= (radius * 2 + thick) # adjust length to include 2x radius + thick
# generate base rectangle
bpy.ops.curve.simple(align='WORLD', location=(0, 0, 0), rotation=(0, 0, 0), Simple_Type='Rectangle',
Simple_width=length * 1.005, Simple_length=thick, use_cyclic_u=True, edit_mode=False)
simple.active_name("tmprect")
# Generate male section and join to the base
if which == 'M' or which == 'MF':
arc(radius, thick, angleb, diameter, tolerance, amount=amount, stem=stem, twist=twist, tneck=tneck,
tthick=tthick, which='M')
simple.move(x=length / 2)
simple.active_name('tmp_male')
simple.select_multiple('tmp')
bpy.ops.object.curve_boolean(boolean_type='UNION')
simple.active_name('male')
simple.remove_multiple('tmp')
simple.rename('male', 'tmprect')
# Generate female section and join to base
if which == 'F' or which == 'MF':
arc(radius, thick, angle, diameter, tolerance, amount=amount, stem=stem, twist=twist, tneck=tneck,
tthick=tthick, which='F')
simple.move(x=-length / 2)
simple.active_name('tmp_receptacle')
simple.union('tmp')
simple.active_name('tmprect')
if twist_line:
joinery.twist_line(thick, tthick, tolerance, tneck, twist_line_amount, length)
if twist_keep:
simple.duplicate()
simple.active_name('tmptwist')
simple.difference('tmp', 'tmprect')
simple.active_name('arcBarArc')
simple.make_active('arcBarArc')
def finger(diameter, stem=2):
# diameter = diameter of the tool for joint creation
# DT = Bit diameter tolerance
# stem = amount of radius the stem or neck of the joint will have
global DT
RESOLUTION = 12 # Data resolution
cube_sx = diameter * DT * (2 + stem - 1)
cube_ty = diameter * DT
cube_sy = 2 * diameter * DT
circle_radius = diameter * DT / 2
c1x = cube_sx / 2
c2x = cube_sx / 2
c2y = 3 * circle_radius
c1y = circle_radius
bpy.ops.curve.simple(align='WORLD', location=(0, cube_ty, 0), rotation=(0, 0, 0), Simple_Type='Rectangle',
Simple_width=cube_sx, Simple_length=cube_sy, use_cyclic_u=True, edit_mode=False)
bpy.context.active_object.name = "ftmprect"
bpy.ops.curve.simple(align='WORLD', location=(c2x, c2y, 0), rotation=(0, 0, 0), Simple_Type='Ellipse',
Simple_a=circle_radius,
Simple_b=circle_radius, Simple_sides=4, use_cyclic_u=True, edit_mode=False, shape='3D')
bpy.context.active_object.name = "ftmpcirc_add"
bpy.context.object.data.resolution_u = RESOLUTION
bpy.ops.object.origin_set(type='ORIGIN_CURSOR', center='MEDIAN')
simple.duplicate()
simple.mirrorx()
simple.union('ftmp')
simple.rename('ftmp', '_sum')
rc1 = circle_radius
bpy.ops.curve.simple(align='WORLD', location=(c1x, c1y, 0), rotation=(0, 0, 0), Simple_Type='Ellipse',
Simple_a=circle_radius, Simple_b=rc1, Simple_sides=4, use_cyclic_u=True, edit_mode=False,
shape='3D')
bpy.context.active_object.name = "_circ_delete"
bpy.context.object.data.resolution_u = RESOLUTION
bpy.ops.object.origin_set(type='ORIGIN_CURSOR', center='MEDIAN')
simple.duplicate()
simple.mirrorx()
simple.union('_circ')
simple.difference('_', '_sum')
bpy.ops.object.curve_remove_doubles()
simple.rename('_sum', "_puzzle")
def t(length, thick, diameter, tolerance, amount=0, stem=1, twist=False, tneck=0.5, tthick=0.01, combination='MF',
base_gender='M', corner=False):
if corner:
if combination == 'MF':
base_gender = 'M'
combination = 'f'
elif combination == 'F':
base_gender = 'F'
combination = 'f'
elif combination == 'M':
base_gender = 'M'
combination = 'm'
bar(length, thick, diameter, tolerance, amount=amount, stem=stem, twist=twist, tneck=tneck,
tthick=tthick, which=base_gender)
simple.active_name('tmp')
fingers(diameter, tolerance, amount=amount, stem=stem)
if combination == 'MF' or combination == 'M' or combination == 'm':
simple.make_active('fingers')
simple.move(y=thick / 2)
simple.duplicate()
simple.active_name('tmp')
simple.union('tmp')
if combination == 'M':
simple.make_active('fingers')
simple.mirrory()
simple.active_name('tmp')
simple.union('tmp')
if combination == 'MF' or combination == 'F' or combination == 'f':
simple.make_active('receptacle')
simple.move(y=-thick / 2)
simple.duplicate()
simple.active_name('tmp')
simple.difference('tmp', 'tmp')
if combination == 'F':
simple.make_active('receptacle')
simple.mirrory()
simple.active_name('tmp')
simple.difference('tmp', 'tmp')
simple.remove_multiple('receptacle')
simple.remove_multiple('fingers')
simple.rename('tmp', 't')
simple.make_active('t')
def tile(diameter, tolerance, tile_x_amount, tile_y_amount, stem=1):
global DT
diameter = diameter * DT
# diameter * DT * (2 + stem - 1)
(4 + 2 * (stem - 1)) * diameter
width = (tile_x_amount) * (4 + 2 * (stem - 1)) * diameter + diameter
height = (tile_y_amount) * (4 + 2 * (stem - 1)) * diameter + diameter
print('size:', width, height)
fingers(diameter, tolerance, amount=tile_x_amount+2, stem=stem)
simple.add_rectangle(width, height)
simple.active_name('_base')
simple.make_active('fingers')
simple.active_name('_fingers')
simple.intersect('_')
simple.remove_multiple('_fingers')
simple.rename('intersection', '_fingers')
simple.move(y=height/2)
simple.union('_')
simple.active_name('_base')
simple.remove_doubles()
simple.rename('receptacle', '_receptacle')
simple.move(y=-height/2)
simple.difference('_', '_base')
simple.active_name('base')
fingers(diameter, tolerance, amount=tile_y_amount, stem=stem)
simple.rename('base', '_base')
simple.remove_doubles()
simple.rename('fingers', '_fingers')
simple.rotate(math.pi/2)
simple.move(x=-width/2)
simple.union('_')
simple.active_name('_base')
simple.rename('receptacle', '_receptacle')
simple.rotate(math.pi/2)
simple.move(x=width/2)
simple.difference('_', '_base')
simple.active_name('tile_ ' + str(tile_x_amount) + '_' + str(tile_y_amount))
def open_curve(line, thick, diameter, tolerance, amount=0, stem=1, twist=False, t_neck=0.5, t_thick=0.01,
twist_amount=1, which='MF', twist_keep=False):
# puts puzzle connectors at the end of an open curve
# optionally puts twist lock connectors at the puzzle connection
# optionally puts twist lock connectors along the open curve
# line = shapely linestring
# thick = thickness of the bar
# diameter = diameter of the tool for joint creation
# tolerance = Tolerance in the joint
# amount = amount of fingers in the joint 0 means auto generate
# stem = amount of radius the stem or neck of the joint will have
# twist = twist lock addition
# twist_amount = twist amount distributed on the curve not counting the joint twist locks
# tneck = percentage the twist neck will have compared to thick
# tthick = thicknest of the twist material
# Which M,F, MF, MM, FF
coords = list(line.coords)
start_angle = joinery.angle(coords[0], coords[1]) + math.pi/2
end_angle = joinery.angle(coords[-1], coords[-2]) + math.pi/2
p_start = coords[0]
p_end = coords[-1]
print('start angle', start_angle)
print('end angle', end_angle)
bpy.ops.curve.simple(align='WORLD', location=(0, 0, 0), rotation=(0, 0, 0), Simple_Type='Rectangle',
Simple_width=thick*2, Simple_length=thick * 2, use_cyclic_u=True, edit_mode=False, shape='3D')
simple.active_name('tmprect')
simple.move(y=thick)
simple.duplicate()
simple.rotate(start_angle)
simple.move(x=p_start[0], y=p_start[1])
simple.make_active('tmprect')
simple.rotate(end_angle)
simple.move(x=p_end[0], y=p_end[1])
simple.union('tmprect')
dilated = line.buffer(thick/2) # expand shapely object to thickness
utils.shapelyToCurve('tmp_curve', dilated, 0.0)
simple.difference('tmp', 'tmp_curve') # truncate curve at both ends with the rectangles
fingers(diameter, tolerance, amount, stem=stem)
simple.make_active('fingers')
simple.rotate(end_angle)
simple.move(x=p_end[0], y=p_end[1])
simple.active_name('tmp_fingers')
simple.union('tmp_')
simple.active_name('tmp_curve')
twistm('tmp_curve', thick, diameter, tolerance, twist, t_neck, t_thick, end_angle, x=p_end[0], y=p_end[1],
twist_keep=twist_keep)
twistf('receptacle', thick, diameter, tolerance, twist, t_neck, t_thick, twist_keep=twist_keep)
simple.rename('receptacle', 'tmp')
simple.rotate(start_angle+math.pi)
simple.move(x=p_start[0], y=p_start[1])
simple.difference('tmp', 'tmp_curve')
if twist_keep:
simple.make_active('twist_keep_f')
simple.rotate(start_angle + math.pi)
simple.move(x=p_start[0], y=p_start[1])
if twist_amount > 0 and twist:
twist_start = line.length / (twist_amount+1)
joinery.distributed_interlock(line, line.length, thick, t_thick, tolerance, twist_amount,
tangent=math.pi/2, fixed_angle=0, start=twist_start, end=twist_start,
closed=False, type='TWIST', twist_percentage=t_neck)
if twist_keep:
simple.duplicate()
simple.active_name('twist_keep')
simple.join_multiple('twist_keep')
simple.make_active('interlock')
simple.active_name('tmp_twist')
simple.difference('tmp', 'tmp_curve')
simple.active_name('puzzle_curve')
def mitre(length, thick, angle, angleb, diameter, tolerance, amount=0, stem=1, twist=False,
tneck=0.5, tthick=0.01, which='MF'):
# length is the total width of the segments including 2 * radius and thick
# radius = radius of the curve
# thick = thickness of the bar
# angle = angle of the female part
# angleb = angle of the male part
# diameter = diameter of the tool for joint creation
# tolerance = Tolerance in the joint
# amount = amount of fingers in the joint 0 means auto generate
# stem = amount of radius the stem or neck of the joint will have
# twist = twist lock addition
# tneck = percentage the twist neck will have compared to thick
# tthick = thicknest of the twist material
# which = which joint to generate, Male Female MaleFemale M, F, MF
# generate base rectangle
bpy.ops.curve.simple(align='WORLD', location=(0, -thick / 2, 0), rotation=(0, 0, 0), Simple_Type='Rectangle',
Simple_width=length * 1.005 + 4 * thick, Simple_length=thick, use_cyclic_u=True,
edit_mode=False,
shape='3D')
simple.active_name("tmprect")
# generate cutout shapes
bpy.ops.curve.simple(align='WORLD', location=(0, 0, 0), rotation=(0, 0, 0), Simple_Type='Rectangle',
Simple_width=4 * thick, Simple_length=6 * thick, use_cyclic_u=True, edit_mode=False,
shape='3D')
simple.move(x=2 * thick)
simple.rotate(angle)
simple.move(x=length / 2)
simple.active_name('tmpmitreright')
bpy.ops.curve.simple(align='WORLD', location=(0, 0, 0), rotation=(0, 0, 0), Simple_Type='Rectangle',
Simple_width=4 * thick, Simple_length=6 * thick, use_cyclic_u=True, edit_mode=False,
shape='3D')
simple.move(x=2 * thick)
simple.rotate(angleb)
simple.move(x=length / 2)
simple.mirrorx()
simple.active_name('tmpmitreleft')
simple.difference('tmp', 'tmprect')
simple.make_active('tmprect')
fingers(diameter, tolerance, amount, stem=stem)
# Generate male section and join to the base
if which == 'M' or which == 'MF':
simple.make_active('fingers')
simple.duplicate()
simple.active_name('tmpfingers')
simple.rotate(angle - math.pi / 2)
h = thick / math.cos(angle)
h /= 2
simple.move(x=length / 2 + h * math.sin(angle), y=-thick / 2)
if which == 'M':
simple.rename('fingers', 'tmpfingers')
simple.rotate(angleb - math.pi / 2)
h = thick / math.cos(angleb)
h /= 2
simple.move(x=length / 2 + h * math.sin(angleb), y=-thick / 2)
simple.mirrorx()
simple.union('tmp')
simple.active_name('tmprect')
# Generate female section and join to base
if which == 'MF' or which == 'F':
simple.make_active('receptacle')
simple.mirrory()
simple.duplicate()
simple.active_name('tmpreceptacle')
simple.rotate(angleb - math.pi / 2)
h = thick / math.cos(angleb)
h /= 2
simple.move(x=length / 2 + h * math.sin(angleb), y=-thick / 2)
simple.mirrorx()
if which == 'F':
simple.rename('receptacle', 'tmpreceptacle2')
simple.rotate(angle - math.pi / 2)
h = thick / math.cos(angle)
h /= 2
simple.move(x=length / 2 + h * math.sin(angle), y=-thick / 2)
simple.difference('tmp', 'tmprect')
simple.remove_multiple('receptacle')
simple.remove_multiple('fingers')
simple.rename('tmprect', 'mitre')
def arc(radius, thick, angle, diameter, tolerance, amount=0, stem=1, twist=False, tneck=0.5, tthick=0.01,
twist_keep=False, which='MF'):
# radius = radius of the curve
# thick = thickness of the bar
# angle = angle of the arc
# diameter = diameter of the tool for joint creation
# tolerance = Tolerance in the joint
# amount = amount of fingers in the joint 0 means auto generate
# stem = amount of radius the stem or neck of the joint will have
# twist = twist lock addition
# tneck = percentage the twist neck will have compared to thick
# tthick = thicknest of the twist material
# which = which joint to generate, Male Female MaleFemale M, F, MF
global DT # diameter tolerance for diameter of finger creation
if angle == 0: # angle cannot be 0
angle = 0.01
negative = False
if angle < 0: # if angle < 0 then negative is true
angle = -angle
negative = True
if amount == 0:
amount = round(thick / ((4 + 2 * (stem - 1)) * diameter * DT)) - 1
fingers(diameter, tolerance, amount, stem=stem)
twistf('receptacle', thick, diameter, tolerance, twist, tneck, tthick, twist_keep=twist_keep)
# generate arc
bpy.ops.curve.simple(align='WORLD', location=(0, 0, 0), rotation=(0, 0, 0), Simple_Type='Segment',
Simple_a=radius - thick / 2,
Simple_b=radius + thick / 2, Simple_startangle=-0.0001, Simple_endangle=math.degrees(angle),
Simple_radius=radius, use_cyclic_u=False, edit_mode=False)
bpy.context.active_object.name = "tmparc"
simple.rename('fingers', '_tmpfingers')
simple.rotate(math.pi)
simple.move(x=radius)
bpy.ops.object.origin_set(type='ORIGIN_CURSOR', center='MEDIAN')
simple.rename('tmparc', '_tmparc')
if which == 'MF' or which == 'M':
simple.union('_tmp')
simple.active_name("base")
twistm('base', thick, diameter, tolerance, twist, tneck, tthick, math.pi, x=radius)
simple.rename('base', '_tmparc')
simple.rename('receptacle', '_tmpreceptacle')
simple.mirrory()
simple.move(x=radius)
bpy.ops.object.origin_set(type='ORIGIN_CURSOR', center='MEDIAN')
simple.rotate(angle)
simple.make_active('_tmparc')
if which == 'MF' or which == 'F':
simple.difference('_tmp', '_tmparc')
bpy.context.active_object.name = "PUZZLE_arc"
bpy.ops.object.curve_remove_doubles()
simple.remove_multiple("_") # Remove temporary base and holes
simple.make_active('PUZZLE_arc')
if which == 'M':
simple.rotate(-angle)
simple.mirrory()
bpy.ops.object.transform_apply(location=True, rotation=True, scale=False)
simple.rotate(-math.pi / 2)
simple.move(y=radius)
simple.rename('PUZZLE_arc', 'PUZZLE_arc_male')
elif which == 'F':
simple.mirrorx()
simple.move(x=radius)
simple.rotate(math.pi / 2)
simple.rename('PUZZLE_arc', 'PUZZLE_arc_receptacle')
else:
simple.move(x=-radius)
# bpy.ops.object.transform_apply(location=True, rotation=False, scale=False, properties=False)
#
if negative: # mirror if angle is negative
simple.mirrory()