def run(self):
vehicle_bus = Bus(channel=settings.CAN_VEHICLE_CHANNEL,
bustype=settings.CAN_BUS_TYPE)
last_gps_odom = None
while True:
message = vehicle_bus.recv()
if message.arbitration_id == 0x5D7:
new_odometer_value = self.decode_odometer_value(message.data)
logging.info('CanManager : odometer received = ' +
str(new_odometer_value))
self.odometer.value = new_odometer_value
if last_gps_odom is None or (new_odometer_value -
last_gps_odom) >= 1:
try:
self.session_manager.add_gps_point()
except AutoReportException:
pass
else:
last_gps_odom = new_odometer_value
logging.info('CanManager : gps_point requested')
elif message.arbitration_id == 0x69F:
logging.info('CanManager : vin received = ' +
str(self.decode_vin_value(message.data)))
try:
self.vin.put_nowait(self.decode_vin_value(message.data))
except queue.Full:
pass
def read_canbus(filename=None):
if filename is None:
bus = Bus()
listener = can.BufferedReader()
while True:
msg = bus.recv(timeout=1)
listener.on_message_received(msg=msg)
tmp_msg = listener.get_message(timeout=0.1)
if tmp_msg:
nmea_msg = NmeaMessage(tmp_msg.timestamp,
tmp_msg.arbitration_id,
tmp_msg.dlc,
tmp_msg.data)
print(nmea_msg.convert_to_actisense())
else:
with open(filename) as test_file:
for line in test_file:
print(line)
def run(self):
mabx_bus = Bus(channel=settings.CAN_MABX_CHANNEL,
bustype=settings.CAN_BUS_TYPE)
mode = None
while True:
message = mabx_bus.recv()
if message.arbitration_id == 0xC1:
new_mode = self.decode_mode_value(message.data)
logging.info('CanManager : mode received = ' + str(new_mode))
if mode != new_mode and new_mode != settings.MODE.UNKNOWN:
if mode is None:
if self.odometer.value == 0:
continue
self.session_manager.start_session(mode=new_mode,
car=self.vin.get())
mode = new_mode
else:
self.session_manager.change_mode(new_mode)
mode = new_mode
log_file_name = os.path.abspath(os.path.join("log_result", log_file_name))
log_file = open(log_file_name, "w")
# inizializzare con i nodi a partire dai quali calcolare la probabilità a posteriori
# se i nodi cambiano ad ogni ciclo reinizializzare la lista ad ogni ciclo
list_evidence_node = ['steer', 'abs_steer', 'throttle', 'speed', 'brake']
status_buf = StatusBuffer(bg.nodes_list)
msg_cont = 0
ids_msg = can.Message(arbitration_id=0, data=[255])
cont_bayes = 0 #numero di volte che viene richiamata la rete bayesiana
flag_16 = 0
attack_index = bg.nodes_list.index('attack')
try:
while (True):
msg = bus.recv()
timestamp = msg.timestamp
print(str(msg_cont) + str(msg), file=log_file)
msg_cont += 1
if msg.arbitration_id < 5:
rec_msg = messageCodec(db, msg=msg).get_data()
"""Ricezione del messaggio"""
if rec_msg[0] == db.get_message_by_name("Steer").frame_id:
degree_read = (rec_msg[1]["Degree"] - num_section_steer)
steer = degree_read / num_section_steer
elif rec_msg[0] == db.get_message_by_name("Pedal").frame_id:
throttle_read = (rec_msg[1]["Throttle"])
brake_read = (rec_msg[1]["Brake"])
throttle = (throttle_read / num_section_pedals) / 2
brake = (brake_read / num_section_pedals) / 2
# Global variables here
CAN_INTERFACE = 'socketcan' # Set CAN Bus interface support type
CAN_CHANNEL = 'can0' # Set CAN Bus interface channel name
CAN_BITRATE = 500000 # Set CAN Bus interface channel bitrate
# Setting up can bus interface
can.rc['interface'] = CAN_INTERFACE # Initiate can interface
can.rc['channel'] = CAN_CHANNEL # Initiate can channel
can.rc['bitrate'] = CAN_BITRATE # Initiate can bitrate
bus = Bus() # Initiate CAN Bus
#
# Configuring Ford Fiesta CAN ID 0x201 to carry the following information:
#
# - Engine revolutions per minute: 870 (0x366) [combustion engine ON at minimum rpms]
# - Leave all other data bytes to their CAN Bus recordings detected value
#
msg = Message(extended_id=False, arbitration_id=0x201, data=[0x3, 0x66, 0x40, 0x0, 0x0, 0x0, 0x0, 0x80])
# Set message delay in seconds
msg_delay = 0.09 # Message delay is 90ms
disc_tout = 0.01 # CAN Bus activity discovery timeout is 10ms
while True: # Loops forever until application is stopped
if bus.recv(disc_tout) != None: # Waits 'disc_tout' seconds to see if monitored CAN Bus channel is active
can_send_msg(bus, msg, msg_delay) # If it is active send 'msg' on the monitored CAN Bus channel
# and wait for "msg_delay' seconds
class XCPFlash:
"""A Tool for flashing devices like electronic control units via the xcp-protocol."""
BYTE_ORDER_LE = 0
BYTE_ORDER_BE = 1
def __init__(self,
tx_id: int,
rx_id: int,
connection_mode: int = 0,
**kwargs):
"""Sets up a CAN bus instance with a filter and a notifier.
:param tx_id:
Id for outgoing messages
:param rx_id:
Id for incoming messages
:param connection_mode:
Connection mode for the xcp-protocol. Only set if a custom mode is needed.
"""
self._tx_id = tx_id
self._rx_id = rx_id
self._ag = 1
self._ag_override = False
self._byte_order = XCPFlash.BYTE_ORDER_LE
self._queue_size = 0
self._max_block_size = 0
self._conn_mode = connection_mode
self._initial_comm_mode = connection_mode
self._extended_id = False
self._master_block_mode_supported = False
self._master_block_mode_supported_override = False
self._min_separation_time_us = 0
self._base_delay_ms = max(kwargs.get("base_delay_ms", 0), 0)
interface = kwargs.get("interface", "")
channel = kwargs.get("channel", "")
bus_kwargs = kwargs.get("bus_kwargs", {})
self._extended_id = kwargs.get("extended_id", False)
ag = kwargs.get("ag", 0)
if ag <= 0:
self._ag_override = False
else:
self._ag_override = True
self._ag = ag
mbm = kwargs.get("master_block_mode", -1)
if mbm < 0:
self._master_block_mode_supported_override = False
else:
self._master_block_mode_supported_override = True
self._master_block_mode_supported = mbm != 0
from can.interface import Bus
if None is not interface and "" != interface:
self._bus = Bus(channel=channel, interface=interface, **bus_kwargs)
else:
self._bus = Bus(channel=channel, **bus_kwargs)
self._bus.set_filters([{
"can_id": rx_id,
"can_mask": rx_id,
"extended": self._extended_id
}])
@staticmethod
def sys_byte_order():
return XCPFlash.BYTE_ORDER_LE if sys.byteorder == 'little' else XCPFlash.BYTE_ORDER_BE
@staticmethod
def swap16(value: int):
value &= 0xffff # ensure 16 bit
i0 = (value >> 8) & 0xff
i1 = value & 0xff
return i0 | (i1 << 8)
@staticmethod
def swap32(value: int):
value &= 0xffffffff # ensure 32 bit
i0 = (value >> 24) & 0xff
i1 = (value >> 16) & 0xff
i2 = (value >> 8) & 0xff
i3 = value & 0xff
return i0 | (i1 << 8) | (i2 << 16) | (i3 << 24)
@staticmethod
def print_progress_bar(iteration,
total,
prefix='',
suffix='',
decimals=1,
length=50,
fill='█'):
"""Print a progress bar to the console.
:param iteration:
Actual iteration of the task
:param total:
Total iteration for completing the task
:param prefix:
Text before the progress bar
:param suffix:
Text after the progress bar
:param decimals:
Number of decimal places for displaying the percentage
:param length:
Line length for the progress bar
:param fill:
Char to fill the bar
"""
percent = ("{0:." + str(decimals) + "f}").format(
100 * (iteration / float(total)))
filled_length = int(length * iteration // total)
bar = fill * filled_length + '-' * (length - filled_length)
sys.stdout.write('\r{} |{}| {}% {}'.format(prefix, bar, percent,
suffix))
if iteration == total:
sys.stdout.write('\n')
def _drain_bus(self):
rx_msgs = []
while True:
received = self._bus.recv(0)
if received is None:
break
if received.arbitration_id == self._rx_id:
rx_msgs.append(received)
return rx_msgs
def _wait_for_rx(self, timeout_s: float):
time_left = timeout_s
while time_left >= 0:
start = time.perf_counter()
received = self._bus.recv(time_left)
stop = time.perf_counter()
time_left -= stop - start
if received is not None and received.arbitration_id == self._rx_id:
return received
return None
def _timeout_s(self, no: int):
return 1e-3 * (self._base_delay_ms + xcp_timeout_ms(no))
@staticmethod
def _is_can_device_tx_queue_full(e: CanError) -> bool:
if XCP_HOST_IS_LINUX:
return XCPFlash._is_linux_enobufs(e)
return False
@staticmethod
def _is_linux_enobufs(e: CanError) -> bool:
# Unfortunately, CanError doesn't pass the error code the base
# so we can't check the errno attribute :/
#
# Failed to transmit: [Errno 105] No buffer space available
return e.args[0].find(str(LinuxErrors.ENOBUFS.value)) >= 0
def program(self, data):
"""Program the device
Program the device with the given firmware
:param data:
the firmware as byte-array
"""
# 0 BYTE Command Code = 0xD0
# 1 Number of data elements [AG] [1..(MAX_CTO-2)/AG]
# 2..AG-1 BYTE Used for alignment, only if AG >2
# AG=1: 2..MAX_CTO-2 AG>1: AG MAX_CTO-AG ELEMENT Data elements
# The MASTER_BLOCK_MODE flag indicates whether the Master Block Mode is available.
# If the master device block mode is supported,
# MAX_BS indicates the maximum allowed block size as the number of
# consecutive command packets (DOWNLOAD_NEXT or PROGRAM_NEXT) in a block sequence.
# MIN_ST indicates the required minimum separation time between the packets of a block
# transfer from the master device to the slave device in units of 100 microseconds.
data_elements_per_message = int((self._max_cto - 2) / self._ag)
bytes_per_message = data_elements_per_message * self._ag
offset = 0
data_offset_start = 4 if self._ag == 4 else 2
msg = Message(arbitration_id=self._tx_id,
is_extended_id=self._extended_id,
data=bytes(8))
count = 0
if self._master_block_mode_supported:
max_bytes_per_block = self._max_block_size * bytes_per_message
block_count = int(ceil(len(data) / max_bytes_per_block))
iteration = 0
bytes_left_in_block = 0
while offset < len(data):
if bytes_left_in_block:
msg.data[0] = XCPCommands.PROGRAM_NEXT.value
else:
bytes_left_in_block = min(max_bytes_per_block,
len(data) - offset)
msg.data[0] = XCPCommands.PROGRAM.value
this_block_bytes = bytes_left_in_block
XCPFlash.print_progress_bar(iteration, block_count,
'flashing')
iteration += 1
msg_bytes = min(bytes_left_in_block, bytes_per_message)
msg.data[1] = bytes_left_in_block
bytes_left_in_block -= msg_bytes
msg.data[data_offset_start:data_offset_start +
msg_bytes] = data[offset:offset + msg_bytes]
offset += msg_bytes
rx_msgs = self._drain_bus()
for response in rx_msgs:
if response.data[0] == XCPResponses.ERROR.value:
if response.data[1] == XCPErrors.ERR_CMD_BUSY:
timeout_s = self._timeout_s(7)
count = 0
else:
message = 'fix me'
if XCPErrors.ERR_SEQUENCE == response.data[1]:
message = 'invalid sequence error'
else:
message = f'0x{response.data[1]:02x}'
raise ConnectionError(
f'{"PROGRAM" if msg.data[0] == XCPCommands.PROGRAM.value else "PROGRAM_NEXT"} failed with {message} (0x{response.data[1]:02x})'
)
while True:
try:
self._bus.send(msg)
break
except CanError as e:
if XCPFlash._is_can_device_tx_queue_full(e):
time.sleep(self._timeout_s(1))
else:
raise e
if 0 == bytes_left_in_block:
response = self._wait_for_rx(self._timeout_s(5))
if None is response:
offset -= this_block_bytes
if count >= 3:
raise ConnectionError(
f'PROGRAM_NEXT failed timeout')
else:
self._sync_or_die()
count += 1
continue
elif response.data[0] == XCPResponses.ERROR.value:
if response.data[1] == XCPErrors.ERR_CMD_BUSY:
timeout_s = self._timeout_s(7)
continue
else:
raise ConnectionError(
f'PROGRAM failed with error code: 0x{response.data[1]:02x}'
)
# wait
if self._min_separation_time_us > 0:
time.sleep(self._min_separation_time_us * 1e-6)
XCPFlash.print_progress_bar(block_count, block_count, 'flashing')
else:
raise NotImplementedError('PROGRAM path not implemented')
msg.data[0] = XCPCommands.PROGRAM.value
msg.data[1] = data_elements_per_message
steps = int(len(data) / bytes_per_message)
for i in range(0, steps):
msg.data[data_offset_start:data_offset_start +
bytes_per_message] = data[offset:offset +
bytes_per_message]
offset += bytes_per_message
self.send_can_msg(msg)
def _sync_or_die(self):
msg = Message(arbitration_id=self._tx_id,
is_extended_id=self._extended_id,
data=bytes(8))
msg.data[0] = XCPCommands.SYNCH.value
self._drain_bus()
self._bus.send(msg)
response = self._wait_for_rx(self._timeout_s(7))
if None is response:
raise ConnectionError("timeout SYNCH")
if response.data[0] == XCPResponses.ERROR.value:
if response.data[1] != XCPErrors.ERR_CMD_SYNCH:
raise ConnectionAbortedError(response.data[1])
def program_start(self):
msg = Message(arbitration_id=self._tx_id,
is_extended_id=self._extended_id,
data=bytes(8))
msg.data[0] = XCPCommands.PROGRAM_START.value
timeout_s = self._timeout_s(1)
count = 0
while True:
self._drain_bus()
self._bus.send(msg)
response = self._wait_for_rx(timeout_s)
if None is response:
if count >= 3:
raise ConnectionError(f'PROGRAM_START failed timeout')
else:
self._sync_or_die()
count += 1
continue
if response.data[0] == XCPResponses.ERROR.value:
if response.data[1] == XCPErrors.ERR_CMD_BUSY:
timeout_s = self._timeout_s(7)
count = 0
continue
else:
raise ConnectionError(
f'PROGRAM_START failed with error code: 0x{response.data[1]:02x}'
)
break
prog_comm_mode = response.data[2]
# if prog_comm_mode != self._conn_mode:
# if self._initial_comm_mode != self._conn_mode:
# # prevent a ring around the rosy situation
# raise ConnectionError(f'communication mode already switch once from {self._initial_comm_mode} to {self._conn_mode} with new request for {prog_comm_mode}')
# self._conn_mode = prog_comm_mode
# # fix me: do this automatically
# raise ConnectionError(f'device requires comm mode 0x{prog_comm_mode:02x} for programming')
self._max_block_size = response.data[4]
self._max_cto = response.data[3]
if self._max_cto == 0 or self._max_cto % self._ag:
raise ConnectionError(
f'inconsistent device params: MAX_CTO_PGM={self._max_cto}, ADDRESS_GRANULARITY={self._ag}'
)
self._queue_size = response.data[6]
self._min_separation_time_us = 100 * response.data[5]
if not self._master_block_mode_supported_override:
self._master_block_mode_supported = (response.data[2] & 1) == 1
def set_mta(self, addr: int, addr_ext: int = 0):
msg = Message(arbitration_id=self._tx_id,
is_extended_id=self._extended_id,
data=bytes(8))
msg.data[0] = XCPCommands.SET_MTA.value
addr = self._swap32(addr)
msg.data[3] = addr_ext
msg.data[4] = addr & 0xff
msg.data[5] = (addr >> 8) & 0xff
msg.data[6] = (addr >> 16) & 0xff
msg.data[7] = (addr >> 24) & 0xff
timeout_s = self._timeout_s(1)
count = 0
while True:
self._drain_bus()
self._bus.send(msg)
response = self._wait_for_rx(timeout_s)
if None is response:
if count >= 3:
raise ConnectionError(f'SET_MTA failed timeout')
else:
self._sync_or_die()
count += 1
continue
if response.data[0] == XCPResponses.ERROR.value:
if response.data[1] == XCPErrors.ERR_CMD_BUSY:
timeout_s = self._timeout_s(7)
count = 0
continue
if response.data[1] == XCPErrors.ERR_PGM_ACTIVE:
timeout_s = self._timeout_s(7)
continue
else:
raise ConnectionError(
f'SET_MTA failed with error code: 0x{response.data[1]:02x}'
)
break
def program_clear(self, range: int):
msg = Message(arbitration_id=self._tx_id,
is_extended_id=self._extended_id,
data=bytes(8))
msg.data[0] = XCPCommands.PROGRAM_CLEAR.value
range = self._swap32(range)
msg.data[1] = 0 # absolute address
msg.data[2] = 0 # reserved
msg.data[3] = 0 # reserved
msg.data[4] = range & 0xff
msg.data[5] = (range >> 8) & 0xff
msg.data[6] = (range >> 16) & 0xff
msg.data[7] = (range >> 24) & 0xff
timeout_s = self._timeout_s(1)
count = 0
while True:
self._drain_bus()
self._bus.send(msg)
response = self._wait_for_rx(timeout_s)
if None is response:
if count >= 3:
raise ConnectionError(f'PROGRAM_CLEAR failed timeout')
else:
self._sync_or_die()
count += 1
continue
if response.data[0] == XCPResponses.ERROR.value:
if response.data[0] == XCPErrors.ERR_CMD_BUSY:
timeout_s = self._timeout_s(7)
count = 0
continue
else:
raise ConnectionError(
f'PROGRAM_CLEAR failed with error code: 0x{response.data[1]:02x}'
)
break
def program_reset(self):
msg = Message(arbitration_id=self._tx_id,
is_extended_id=self._extended_id,
data=bytes(8))
msg.data[0] = XCPCommands.PROGRAM_RESET.value
timeout_s = self._timeout_s(5)
count = 0
while True:
self._drain_bus()
self._bus.send(msg)
response = self._wait_for_rx(timeout_s)
if None is response:
if count >= 3:
raise ConnectionError(f'PROGRAM_CLEAR failed timeout')
else:
self._sync_or_die()
count += 1
continue
if response.data[0] == XCPResponses.ERROR.value:
if response.data[0] == XCPErrors.ERR_CMD_BUSY:
timeout_s = self._timeout_s(7)
count = 0
continue
if response.data[0] == XCPErrors.ERR_PGM_ACTIVE:
timeout_s = self._timeout_s(7)
continue
if response.data[0] == XCPErrors.ERR_CMD_UNKNOWN:
break
else:
raise ConnectionError(
f'PROGRAM_CLEAR failed with error code: 0x{response.data[1]:02x}'
)
break
def connect(self):
"""Connect to the device"""
msg = Message(arbitration_id=self._tx_id,
is_extended_id=self._extended_id,
data=bytes(8))
msg.data[0] = XCPCommands.CONNECT.value
msg.data[1] = self._conn_mode
# spec, p138
if self._conn_mode == 0:
timeout_s = xcp_timeout_s(
1) # some bootloader require fast startup
else:
timeout_s = self._timeout_s(7)
while True:
self._drain_bus()
try:
self._bus.send(msg)
response = self._wait_for_rx(timeout_s)
except CanError as e:
if not XCPFlash._is_can_device_tx_queue_full(e):
raise e
response = None
time.sleep(self._timeout_s(7))
if None is response:
continue
if response.data[0] == XCPResponses.ERROR.value:
raise ConnectionAbortedError(response.data[1])
break
self._pgm = (response.data[1] & 0b00010000) != 0
self._stm = (response.data[1] & 0b00001000) != 0
self._daq = (response.data[1] & 0b00000100) != 0
self._cal_pag = (response.data[1] & 0b00000001) != 0
if not self._pgm:
raise ConnectionError(
"Flash programming not supported by the connected device")
self._max_data = response.data[4] << 8
self._max_data += response.data[5]
self._byte_order = response.data[2] & 1
if not self._ag_override:
self._ag = 1 << ((response.data[2] >> 1) & 0x3)
if self._byte_order == self.sys_byte_order():
self._swap16 = lambda x: x & 0xffff
self._swap32 = lambda x: x & 0xffffffff
else:
self._swap16 = self.swap16
self._swap32 = self.swap32
def disconnect(self, ignore_timeout: bool):
"""Disconnect from the device"""
msg = Message(arbitration_id=self._tx_id,
is_extended_id=self._extended_id,
data=bytes(8))
msg.data[0] = XCPCommands.DISCONNECT.value
timeout_s = self._timeout_s(1)
count = 0
while True:
self._drain_bus()
self._bus.send(msg)
response = self._wait_for_rx(timeout_s)
if None is response:
if ignore_timeout:
break
if count >= 3:
raise ConnectionError(f'PROGRAM_CLEAR failed timeout')
else:
self._sync_or_die()
count += 1
continue
if response.data[0] == XCPResponses.ERROR.value:
if response.data[0] == XCPErrors.ERR_CMD_BUSY:
timeout_s = self._timeout_s(7)
count = 0
continue
if response.data[0] == XCPErrors.ERR_PGM_ACTIVE:
timeout_s = self._timeout_s(7)
count = 0
continue
if response.data[0] == XCPErrors.ERR_CMD_UNKNOWN:
break
else:
raise ConnectionError(
f'PROGRAM_CLEAR failed with error code: 0x{response.data[1]:02x}'
)
break
def __call__(self, start_addr, data):
"""Flash the device
Do all the necessary steps for flashing, including connecting to the device and clearing the memory.
:param start_addr:
Start address for the firmware
:param data:
The firmware as byte-array
"""
try:
logger.info("connecting...")
self.connect()
logger.info("connected")
logger.info("start of programming")
self.program_start()
logger.info(f"set MTA to {start_addr:08x}")
self.set_mta(start_addr)
logger.info(f"clear range {len(data):08x}")
self.program_clear(len(data))
logger.info(f"program data")
self.program(data)
logger.info(f"reset")
self.program_reset()
logger.info(f"disconnect")
self.disconnect(True)
except ConnectionAbortedError as err:
if err.args[0] == "Timeout":
logger.error("\nConnection aborted: Timeout")
else:
logging.error("\nConnection aborted: {}".format(
logger.error_messages[err.args[0]]))
except ConnectionError as err:
logger.error("\nConnection error: {}".format(err))
except OSError as err:
logger.error(err)
# Setting up can bus interface
can.rc['interface'] = CAN_INTERFACE # Initiate can interface
can.rc['channel'] = CAN_CHANNEL # Initiate can channel
can.rc['bitrate'] = CAN_BITRATE # Initiate can bitrate
bus = Bus() # Initiate CAN Bus
#
# Configuring Ford Fiesta CAN ID 0x201 to carry the following information:
#
# - Engine revolutions per minute: 870 (0x366) [combustion engine ON at minimum rpms]
# - Leave all other data bytes to their CAN Bus recordings detected value
#
msg = Message(extended_id=False,
arbitration_id=0x201,
data=[0x3, 0x66, 0x40, 0x0, 0x0, 0x0, 0x0, 0x80])
# Set message delay in seconds
msg_delay = 0.09 # Message delay is 90ms
disc_tout = 0.01 # CAN Bus activity discovery timeout is 10ms
while True: # Loops forever until application is stopped
if bus.recv(
disc_tout
) != None: # Waits 'disc_tout' seconds to see if monitored CAN Bus channel is active
can_send_msg(
bus, msg, msg_delay
) # If it is active send 'msg' on the monitored CAN Bus channel
# and wait for "msg_delay' seconds
sock_pi = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
sock_pi.bind(bb_pi_addr)
sock_pi.settimeout(0.0001)
i = 0
flag = True
msg_rec = False
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
can_list = []
bus = Bus('can1', bustype='socketcan', fd=False)
print("While Loop")
# start_timer = timer()
while True:
msg = bus.recv(timeout=0.001)
if msg is not None:
# msg.timestamp = timer() - start_timer
print(msg)
try:
data = sock_pi.recv(2048)
except KeyboardInterrupt:
raise
except:
data = None
if data is not None:
can_list.append(decode_udp_msg(data.decode().split("*")))
# print(data)
for msg_pi in can_list: