def restore_image(self):
""" """
if is_mounted(self.target_device):
raise DeviceIsMounted("Please umount first")
self.active = True
information = Information(self.image_path)
information.load()
if self.partitions:
information.set_partitions(self.partitions)
image_name = information.get_image_name()
compressor_level = information.get_image_compressor_level()
partitions = information.get_partitions()
# Get total size
total_bytes = 0
for part in partitions:
total_bytes += part.size
self.total_blocks = long(math.ceil(total_bytes / float(BLOCK_SIZE)))
device = Device(self.target_device)
if device.is_disk() != \
information.get_image_is_disk():
log.error("Invalid target device %s" % device.path)
raise ErrorRestoringImage("Invalid target device")
try:
disk = Disk(device)
except _ped.DiskLabelException:
try:
device.fix_disk_label()
disk = Disk(device)
except:
log.error("Unrecognized disk label")
raise ErrorRestoringImage("Unrecognized disk label")
if information.get_image_is_disk():
log.info("Restoring MBR and Disk Layout")
mbr = Mbr(self.image_path)
mbr.restore_from_file(self.target_device)
dlm = DiskLayoutManager(self.image_path)
dlm.restore_from_file(disk, self.expand)
self.timer.start()
for part in partitions:
if not self.active: break
if information.get_image_is_disk():
partition = disk.get_partition_by_number(
part.number, part.type)
else:
parent_path = get_parent_path(self.target_device)
parent_device = Device(parent_path)
parent_disk = Disk(parent_device)
partition = parent_disk.get_partition_by_path(
self.target_device, part.type)
log.info("Restoring partition {0}".format(partition.get_path()))
if partition is None:
raise ErrorRestoringImage("No valid partitions found")
if hasattr(part, "uuid"):
partition.filesystem.open_to_write(part.uuid)
else:
partition.filesystem.open_to_write()
if hasattr(part, "label"):
partition.filesystem.write_label(part.label)
if partition.filesystem.is_swap():
continue
pattern = FILE_PATTERN.format(name=image_name,
partition=part.number,
volume="{volume}")
volumes = 1
if hasattr(part, "volumes"):
volumes = part.volumes
image_reader = ImageReaderFactory(self.image_path, pattern,
volumes, compressor_level,
self.notify_status)
extract_callback = None
if compressor_level:
compressor = Compressor(compressor_level)
extract_callback = compressor.extract
self.buffer_manager = BufferManagerFactory(image_reader.read_block,
extract_callback)
# open the file after instantiating BufferManager, cause of a
# problem on multiprocessing module, FD_CLOEXE doesn't work
# (I don't want to dup the file descriptor).
image_reader.open()
self.buffer_manager.start()
buffer = self.buffer_manager.output_buffer
while self.active:
try:
data = buffer.get()
except IOError, e:
if e.errno == errno.EINTR:
self.cancel()
break
if data == EOF:
break
try:
partition.filesystem.write_block(data)
except ErrorWritingToDevice, e:
if not self.canceled:
self.stop()
raise e
self.processed_blocks += 1
def restore_image(self):
""" """
invalid_partitions = False
if is_mounted(self.target_device):
log.error("The partition {0} is mounted, please umount first, and try again".format(self.target_device))
self.notify_status("mounted_partition_error",{"mounted_partition_error":self.target_device})
raise DeviceIsMounted("Please umount first")
self.active = True
information = Information(self.image_path)
information.load()
if self.partitions:
information.set_partitions(self.partitions)
image_name = information.get_image_name()
compressor_level = information.get_image_compressor_level()
partitions = information.get_partitions()
# Get total size
total_bytes = 0
for part in partitions:
total_bytes += part.size
self.total_blocks = long(math.ceil(total_bytes/float(BLOCK_SIZE)))
device = Device(self.target_device)
if device.is_disk() != \
information.get_image_is_disk():
log.error("Invalid target device %s" % device.path)
self.notify_status("write_error", \
{"write_error":device_path})
raise ErrorRestoringImage("Invalid target device")
try:
disk = Disk(device)
except _ped.DiskLabelException:
try:
device.fix_disk_label()
disk = Disk(device)
except:
log.error("Unrecognized disk label")
raise ErrorRestoringImage("Unrecognized disk label")
if information.get_image_is_disk():
if ("msdos" not in disk.getPedDisk().type.name):
#se a tabela nao for msdos, recria ela como msdos para nao haver problemas
d = disk_new_fresh(device.getPedDevice(), _ped.disk_type_get("msdos"))
d.commit_to_dev()
disk = Disk(device)
#Get total disk target size
disk_size = get_disk_size(self.target_device)
if (total_bytes > disk_size):
log.info("Total size of image is {0}".format(total_bytes))
log.info("Total size of {0} is {1}".format(self.target_device,disk_size))
log.error("The size of {0} is {1}, is not enough to apply the selected image".format(self.target_device, disk_size))
disk_space_info = []
disk_space_info.append(total_bytes)
disk_space_info.append(disk_size)
self.notify_status("no_enough_space", {"disk_minimum_size":disk_space_info})
raise ErrorRestoringImage("No enough space on disk")
log.info("Restoring MBR and Disk Layout")
mbr = Mbr(self.image_path)
try:
mbr.restore_from_file(self.target_device)
except Exception as e:
log.error("Error to restore the Mbr file")
image_path = self.image_path.split("/")[3] + "/mbr.bin"
self.notify_status("file_not_found",{"file_not_found":image_path})
raise ErrorFileNotFound("File not Found {0}".format(image_path))
dlm = DiskLayoutManager(self.image_path)
#try:
if self.expand != 2:
dlm.restore_from_file(disk, True)
else:
dlm.restore_from_file(disk, False)
#except Exception as e:
# log.error("Error to restore the disk.dl file")
# image_path = self.image_path.split("/")[3] + "/disk.dl"
# self.notify_status("file_not_found",{"file_not_found":image_path})
# raise ErrorFileNotFound("File not found {0}".format(image_path))
else:
parent_path = get_parent_path(self.target_device)
parent_device = Device(parent_path)
parent_disk = Disk(parent_device)
partition = parent_disk.get_partition_by_path(
self.target_device,
part.type)
part_size = partition.getSize('b')
if (total_bytes > part_size):
part_space_info = []
part_space_info.append(total_bytes)
part_space_info.append(part_size)
log.error("The partition selected is smaller than the image")
self.notify_status("no_enough_space_part", {"disk_minimum_size":part_space_info})
raise ErrorRestoringImage("No enought space on partition")
self.timer.start()
total_partitions = len(partitions)
for part in partitions:
total_partitions -= 1
if not self.active: break
if (self.expand == 3) and (total_partitions == 0): break
if information.get_image_is_disk():
partition = disk.get_partition_by_number(part.number,
part.type)
else:
parent_path = get_parent_path(self.target_device)
parent_device = Device(parent_path)
parent_disk = Disk(parent_device)
partition = parent_disk.get_partition_by_path(
self.target_device,
part.type)
if partition is None:
invalid_partitions = True
continue
log.info("Restoring partition {0}".format(partition.get_path()))
self.notify_status("restore_partition",\
{"restoring_partition":partition.get_path()})
invalid_partitions = False
if hasattr(part, "uuid"):
partition.filesystem.open_to_write(part.uuid)
else:
partition.filesystem.open_to_write()
if hasattr(part, "label"):
partition.filesystem.write_label(part.label)
if partition.filesystem.is_swap():
continue
pattern = FILE_PATTERN.format(name=image_name,
partition=part.number,
volume="{volume}")
volumes = 1
if hasattr(part, "volumes"):
volumes = part.volumes
try:
image_reader = ImageReaderFactory(self.image_path, pattern,
volumes, compressor_level,
self.notify_status)
except Exception as e:
log.info(e)
extract_callback = None
if compressor_level:
compressor = Compressor(compressor_level)
extract_callback = compressor.extract
self.buffer_manager = BufferManagerFactory(image_reader.read_block,
self.notify_status,
extract_callback)
# open the file after instantiating BufferManager, cause of a
# problem on multiprocessing module, FD_CLOEXE doesn't work
# (I don't want to dup the file descriptor).
image_reader.open()
self.buffer_manager.start()
buffer = self.buffer_manager.output_buffer
while self.active:
try:
data = buffer.get()
except IOError, e:
if e.errno == errno.EINTR:
self.notify_status("read_buffer_error",{"read_buffer_error":str(e)})
data = ""
self.cancel()
raise ErrorReadingFromDevice(e)
break
if data == EOF:
break
try:
partition.filesystem.write_block(data)
except ErrorWritingToDevice, e:
self.notify_status("write_partition_error")
if not self.canceled:
self.stop()
raise e
self.processed_blocks += 1
def restore_image(self):
""" """
if is_mounted(self.target_device):
raise DeviceIsMounted("Please umount first")
self.active = True
information = Information(self.image_path)
information.load()
if self.partitions:
information.set_partitions(self.partitions)
image_name = information.get_image_name()
compressor_level = information.get_image_compressor_level()
partitions = information.get_partitions()
# Get total size
total_bytes = 0
for part in partitions:
total_bytes += part.size
self.total_blocks = long(math.ceil(total_bytes/float(BLOCK_SIZE)))
device = Device(self.target_device)
if device.is_disk() != \
information.get_image_is_disk():
log.error("Invalid target device %s" % device.path)
raise ErrorRestoringImage("Invalid target device")
try:
disk = Disk(device)
except _ped.DiskLabelException:
try:
device.fix_disk_label()
disk = Disk(device)
except:
log.error("Unrecognized disk label")
raise ErrorRestoringImage("Unrecognized disk label")
if information.get_image_is_disk():
log.info("Restoring MBR and Disk Layout")
mbr = Mbr(self.image_path)
mbr.restore_from_file(self.target_device)
dlm = DiskLayoutManager(self.image_path)
dlm.restore_from_file(disk, self.expand)
self.timer.start()
for part in partitions:
if not self.active: break
if information.get_image_is_disk():
partition = disk.get_partition_by_number(part.number,
part.type)
else:
parent_path = get_parent_path(self.target_device)
parent_device = Device(parent_path)
parent_disk = Disk(parent_device)
partition = parent_disk.get_partition_by_path(
self.target_device,
part.type)
log.info("Restoring partition {0}".format(partition.get_path()))
if partition is None:
raise ErrorRestoringImage("No valid partitions found")
if hasattr(part, "uuid"):
partition.filesystem.open_to_write(part.uuid)
else:
partition.filesystem.open_to_write()
if hasattr(part, "label"):
partition.filesystem.write_label(part.label)
if partition.filesystem.is_swap():
continue
pattern = FILE_PATTERN.format(name=image_name,
partition=part.number,
volume="{volume}")
volumes = 1
if hasattr(part, "volumes"):
volumes = part.volumes
image_reader = ImageReaderFactory(self.image_path, pattern,
volumes, compressor_level,
self.notify_status)
extract_callback = None
if compressor_level:
compressor = Compressor(compressor_level)
extract_callback = compressor.extract
self.buffer_manager = BufferManagerFactory(image_reader.read_block,
extract_callback)
# open the file after instantiating BufferManager, cause of a
# problem on multiprocessing module, FD_CLOEXE doesn't work
# (I don't want to dup the file descriptor).
image_reader.open()
self.buffer_manager.start()
buffer = self.buffer_manager.output_buffer
while self.active:
try:
data = buffer.get()
except IOError, e:
if e.errno == errno.EINTR:
self.cancel()
break
if data == EOF:
break
try:
partition.filesystem.write_block(data)
except ErrorWritingToDevice, e:
if not self.canceled:
self.stop()
raise e
self.processed_blocks += 1
def create_image(self):
""" """
if is_mounted(self.device_path):
raise DeviceIsMounted("Please umount first")
self.active = True
device = Device(self.device_path)
disk = Disk(device)
if device.is_disk():
mbr = Mbr(self.target_path)
mbr.save_to_file(self.device_path)
dlm = DiskLayoutManager(self.target_path)
dlm.save_to_file(disk)
partition_list = disk.get_valid_partitions(self.raw)
if not partition_list:
raise ErrorCreatingImage("Partition(s) hasn't a " +\
"valid filesystem")
# check partitions filesystem
if not self.raw:
for part in partition_list:
log.info("Checking filesystem of {0}".format(part.get_path()))
self.notify_status("checking_filesystem",
{"device": part.get_path()})
if not part.filesystem.check():
log.error("{0} Filesystem is not clean".\
format(part.get_path()))
raise ErrorCreatingImage("{0} Filesystem is not clean".\
format(part.get_path()))
# fill partitions with zeroes
if self.raw and self.fill_with_zeros:
for part in partition_list:
log.info("{0} Filling with zeros".format(part.get_path()))
self.notify_status("filling_with_zeros", {"device":
part.get_path()})
part.filesystem.fill_with_zeros()
# get total size
total_bytes = 0
for part in partition_list:
total_bytes += part.filesystem.get_used_size()
self.total_blocks = long(math.ceil(total_bytes/float(BLOCK_SIZE)))
information = Information(self.target_path)
information.set_image_is_disk(device.is_disk())
information.set_image_name(self.image_name)
information.set_image_compressor_level(self.compressor_level)
# TODO: Abstract this whole part, when creating isos,
# splitting in files, etc...
self.timer.start()
remaining_size = self.split_size
if self.create_iso:
remaining_size -= BASE_SYSTEM_SIZE
slices = dict() # Used when creating iso
iso_volume = 1 # Used when creating iso
for part in partition_list:
if not self.active: break
log.info("Creating image of {0}".format(part.get_path()))
number = part.get_number()
uuid = part.filesystem.uuid()
label = part.filesystem.read_label()
type = part.filesystem.type
part.filesystem.open_to_read()
compact_callback = None
if self.compressor_level:
compressor = Compressor(self.compressor_level)
compact_callback = compressor.compact
self.buffer_manager = BufferManagerFactory(
part.filesystem.read_block,
compact_callback)
self.buffer_manager.start()
buffer = self.buffer_manager.output_buffer
volumes = 1
while self.active:
total_written = 0 # Used to help splitting the file
pattern = FILE_PATTERN.format(name=self.image_name,
partition=number,
volume=volumes)
file_path = self.target_path + pattern
fd = open(file_path, "wb")
next_partition = False
while self.active:
try:
data = buffer.get()
except IOError, e:
if e.errno == errno.EINTR:
self.cancel()
break
if data == EOF:
next_partition = True
if self.create_iso:
remaining_size -= total_written
if not slices.has_key(iso_volume):
slices[iso_volume] = list()
slices[iso_volume].append(file_path)
break
fd.write(data)
self.processed_blocks += 1
if self.split_size:
bytes_written = len(data)
total_written += bytes_written
if (total_written + bytes_written) >= remaining_size:
volumes += 1
remaining_size = self.split_size
if self.create_iso:
if not slices.has_key(iso_volume):
slices[iso_volume] = list()
slices[iso_volume].append(file_path)
iso_volume += 1
break
fd.close()
if next_partition: break
self.buffer_manager.join()
part.filesystem.close()
information.add_partition(number, type, volumes,
part.filesystem.get_used_size(),
uuid, label)
class ImageCreator:
def __init__(self, source_device, output_folder,
status_callback, image_name="image", compressor_level=6,
raw=False, split_size=0, create_iso=False,
fill_with_zeros=False):
assert check_if_root(), "You need to run this application as root"
assert os.path.isdir(output_folder), "{0} folder is invalid".\
format(output_folder)
self.image_name = image_name
self.device_path = source_device
self.target_path = adjust_path(output_folder)
self.notify_status = status_callback
self.compressor_level = compressor_level
self.raw = raw
self.split_size = split_size
self.create_iso = create_iso
self.fill_with_zeros = fill_with_zeros
self.timer = Timer(self.notify_percent)
self.total_blocks = 0
self.processed_blocks = 0
self.current_percent = -1
self.active = False
self.canceled = False
def notify_percent(self):
percent = (self.processed_blocks/float(self.total_blocks)) * 100
if percent > self.current_percent:
self.current_percent = percent
self.notify_status("progress", {"percent": percent})
def create_image(self):
""" """
if is_mounted(self.device_path):
raise DeviceIsMounted("Please umount first")
self.active = True
device = Device(self.device_path)
disk = Disk(device)
if device.is_disk():
mbr = Mbr(self.target_path)
mbr.save_to_file(self.device_path)
dlm = DiskLayoutManager(self.target_path)
dlm.save_to_file(disk)
partition_list = disk.get_valid_partitions(self.raw)
if not partition_list:
raise ErrorCreatingImage("Partition(s) hasn't a " +\
"valid filesystem")
# check partitions filesystem
if not self.raw:
for part in partition_list:
log.info("Checking filesystem of {0}".format(part.get_path()))
self.notify_status("checking_filesystem",
{"device": part.get_path()})
if not part.filesystem.check():
log.error("{0} Filesystem is not clean".\
format(part.get_path()))
raise ErrorCreatingImage("{0} Filesystem is not clean".\
format(part.get_path()))
# fill partitions with zeroes
if self.raw and self.fill_with_zeros:
for part in partition_list:
log.info("{0} Filling with zeros".format(part.get_path()))
self.notify_status("filling_with_zeros", {"device":
part.get_path()})
part.filesystem.fill_with_zeros()
# get total size
total_bytes = 0
for part in partition_list:
total_bytes += part.filesystem.get_used_size()
self.total_blocks = long(math.ceil(total_bytes/float(BLOCK_SIZE)))
information = Information(self.target_path)
information.set_image_is_disk(device.is_disk())
information.set_image_name(self.image_name)
information.set_image_compressor_level(self.compressor_level)
# TODO: Abstract this whole part, when creating isos,
# splitting in files, etc...
self.timer.start()
remaining_size = self.split_size
if self.create_iso:
remaining_size -= BASE_SYSTEM_SIZE
slices = dict() # Used when creating iso
iso_volume = 1 # Used when creating iso
for part in partition_list:
if not self.active: break
log.info("Creating image of {0}".format(part.get_path()))
number = part.get_number()
uuid = part.filesystem.uuid()
label = part.filesystem.read_label()
type = part.filesystem.type
part.filesystem.open_to_read()
compact_callback = None
if self.compressor_level:
compressor = Compressor(self.compressor_level)
compact_callback = compressor.compact
self.buffer_manager = BufferManagerFactory(
part.filesystem.read_block,
compact_callback)
self.buffer_manager.start()
buffer = self.buffer_manager.output_buffer
volumes = 1
while self.active:
total_written = 0 # Used to help splitting the file
pattern = FILE_PATTERN.format(name=self.image_name,
partition=number,
volume=volumes)
file_path = self.target_path + pattern
fd = open(file_path, "wb")
next_partition = False
while self.active:
try:
data = buffer.get()
except IOError, e:
if e.errno == errno.EINTR:
self.cancel()
break
if data == EOF:
next_partition = True
if self.create_iso:
remaining_size -= total_written
if not slices.has_key(iso_volume):
slices[iso_volume] = list()
slices[iso_volume].append(file_path)
break
fd.write(data)
self.processed_blocks += 1
if self.split_size:
bytes_written = len(data)
total_written += bytes_written
if (total_written + bytes_written) >= remaining_size:
volumes += 1
remaining_size = self.split_size
if self.create_iso:
if not slices.has_key(iso_volume):
slices[iso_volume] = list()
slices[iso_volume].append(file_path)
iso_volume += 1
break
fd.close()
if next_partition: break
self.buffer_manager.join()
part.filesystem.close()
information.add_partition(number, type, volumes,
part.filesystem.get_used_size(),
uuid, label)
# We dont need to save the data of the swap partition
# we just copy the informations and re-create when
# restoring
swap = disk.get_swap_partition()
if swap is not None:
log.info("Swap path {0}".format(swap.get_path()))
number = swap.get_number()
uuid = swap.filesystem.uuid()
type = swap.filesystem.type
information.add_partition(number, type, 0, 0, uuid)
information.save()
self.stop()
if self.create_iso:
log.info("Starting create ISO operation")
iso_creator = IsoCreator(self.target_path, slices,
self.image_name,
self.notify_status,
device.is_disk())
iso_creator.run()
if self.canceled:
self.notify_status("canceled", {"operation":
"Create image"})
else:
self.notify_status("finish")
log.info("Creation finished")
class ImageCreator:
def __init__(self, source_device, output_folder,
status_callback, image_name="image", compressor_level=6,
raw=False, split_size=0, create_iso=False,
fill_with_zeros=False):
self.image_name = image_name
self.device_path = source_device
self.target_path = adjust_path(output_folder)
self.notify_status = status_callback
self.compressor_level = compressor_level
self.raw = raw
self.split_size = split_size
self.create_iso = create_iso
self.fill_with_zeros = fill_with_zeros
self.timer = Timer(self.notify_percent)
self.total_blocks = 0
self.processed_blocks = 0
self.current_percent = -1
self.active = False
self.canceled = False
self.partclone_stderr = None
self.partclone_sucess = False
self.data_is_eof = False
if not check_if_root():
log.info("You need to run this application as root")
self.notify_status("not_root", \
{"not_root":"You dont't have permission"})
if not os.path.isdir(output_folder):
try:
os.mkdir(output_folder)
except Exception as e:
log.info("The folder is invalid. {0}".format(e))
self.notify_status("invalid_folder",\
{"invalid_folder":output_folder})
raise InvalidFolder("Invalid folder {0}".format(output_folder))
def notify_percent(self):
#refresh the interface percentage
percent = (self.processed_blocks/float(self.total_blocks)) * 100
if percent > self.current_percent:
self.current_percent = percent
self.notify_status("progress", {"percent": percent})
#verify stderr from partclone
if self.partclone_stderr != None:
partclone_status = self.partclone_stderr.readline()
if partclone_status.startswith("Partclone successfully cloned the device"):
self.partclone_sucess = True
else:
if self.data_is_eof:
part_list = partclone_status.split()
if part_list[0] == "current":
if len(part_list) >= 13:
try:
status = partclone_status.split()[13].split(",")[0]
status2 = status.split("%")[0]
self.notify_status("waiting_partclone",{"partclone_percent":float(status2)})
except Exception as e:
log.info(e)
raise ErrorCreatingImage("Create image wasn't made with success")
def create_image(self):
""" """
if is_mounted(self.device_path):
log.error("The partition {0} is mounted, please umount first, and try again".format(self.device_path))
self.notify_status("mounted_partition_error",{"mounted_partition_error":self.device_path})
raise DeviceIsMounted("Please umount first")
self.active = True
device = Device(self.device_path)
disk = Disk(device)
if device.is_disk():
try:
mbr = Mbr(self.target_path)
mbr.save_to_file(self.device_path)
dlm = DiskLayoutManager(self.target_path)
dlm.save_to_file(disk)
except Exception as e:
log.info(e)
self.notify_status("write_error", \
{"write_error":self.target_path})
raise ErrorWritingToDevice("Write error in {0}".format(self.target_path))
partition_list = disk.get_valid_partitions(self.raw)
if not partition_list:
raise ErrorCreatingImage("Partition(s) hasn't a " +\
"valid filesystem")
# check partitions filesystem
if not self.raw:
for part in partition_list:
log.info("Checking filesystem of {0}".format(part.get_path()))
self.notify_status("checking_filesystem",
{"device": part.get_path()})
if not part.filesystem.check():
log.error("{0} Filesystem is not clean".\
format(part.get_path()))
raise ErrorCreatingImage("{0} Filesystem is not clean".\
format(part.get_path()))
# fill partitions with zeroes
if self.raw and self.fill_with_zeros:
for part in partition_list:
log.info("{0} Filling with zeros".format(part.get_path()))
self.notify_status("filling_with_zeros", {"device":
part.get_path()})
part.filesystem.fill_with_zeros()
# get total size
total_bytes = 0
for part in partition_list:
total_bytes += part.filesystem.get_used_size()
self.total_blocks = long(math.ceil(total_bytes/float(BLOCK_SIZE)))
information = Information(self.target_path)
information.set_image_is_disk(device.is_disk())
information.set_image_name(self.image_name)
information.set_image_compressor_level(self.compressor_level)
if device.is_disk():
disk_info = DiskInfo()
disk_dict = disk_info.formated_disk(self.device_path)
information.set_disk_size(disk_dict["size"])
# TODO: Abstract this whole part, when creating isos,
# splitting in files, etc...
self.timer.start()
remaining_size = self.split_size
if self.create_iso:
remaining_size -= BASE_SYSTEM_SIZE
slices = dict() # Used when creating iso
iso_volume = 1 # Used when creating iso
for part in partition_list:
if not self.active: break
log.info("Creating image of {0}".format(part.get_path()))
self.notify_status("image_creator", \
{"image_creator ": part.get_path()})
number = part.get_number()
uuid = part.filesystem.uuid()
label = part.filesystem.read_label()
type = part.filesystem.type
part.filesystem.open_to_read()
#check if partclone is running
if type in ("ext2","ext3","ext4"):
self.partclone_stderr = part.filesystem.get_error_ext()
compact_callback = None
if self.compressor_level:
compressor = Compressor(self.compressor_level)
compact_callback = compressor.compact
self.buffer_manager = BufferManagerFactory(
part.filesystem.read_block,
self.notify_status,
compact_callback)
self.buffer_manager.start()
buffer = self.buffer_manager.output_buffer
volumes = 1
while self.active:
total_written = 0 # Used to help splitting the file
pattern = FILE_PATTERN.format(name=self.image_name,
partition=number,
volume=volumes)
file_path = self.target_path + pattern
try:
fd = open(file_path, "wb")
except Exception as e:
log.info(e)
self.notify_status("open_file", \
{"open_file":file_path})
raise ImageNotFound("The file wasn't found {0}". \
format(file_path))
next_partition = False
while self.active:
try:
data = buffer.get()
except IOError, e:
#self.notify_status("read_buffer_error", \
# {"read_buffer_error":str(e)})
if e.errno == errno.EINTR:
self.notify_status("read_buffer_error", \
{"read_buffer_error":str(e)})
data = ""
self.cancel()
raise ErrorReadingFromDevice(e)
break
if data == EOF:
if (self.partclone_stderr != None):
self.data_is_eof = True
while self.partclone_sucess == False:
pass
self.partclone_stderr = None
self.partclone_sucess = False
self.data_is_eof = False
next_partition = True
if self.create_iso:
remaining_size -= total_written
if not slices.has_key(iso_volume):
slices[iso_volume] = list()
slices[iso_volume].append(file_path)
break
try:
fd.write(data)
except Exception as e:
log.info("{0}".format(e))
self.notify_status("disk_full")
self.cancel()
raise ErrorWritingToDevice("Error in write file {0}".\
format(file_path))
self.processed_blocks += 1
if self.split_size:
bytes_written = len(data)
total_written += bytes_written
if (total_written + bytes_written) >= remaining_size:
volumes += 1
remaining_size = self.split_size
if self.create_iso:
if not slices.has_key(iso_volume):
slices[iso_volume] = list()
slices[iso_volume].append(file_path)
iso_volume += 1
break
try:
fd.close()
except Exception as e:
log.info(e)
self.notify_status("write_error",{"write_error":e})
raise ErrorCloseToWrite("Close Error {0}".format(e))
if next_partition: break
self.buffer_manager.join()
part.filesystem.close()
information.add_partition(number, type, volumes,
part.filesystem.get_used_size(),
uuid, label)
# We dont need to save the data of the swap partition
# we just copy the informations and re-create when
# restoring
swap = disk.get_swap_partition()
if swap is not None:
log.info("Swap path {0}".format(swap.get_path()))
number = swap.get_number()
uuid = swap.filesystem.uuid()
type = swap.filesystem.type
information.add_partition(number, type, 0, 0, uuid)
try:
information.save()
except Exception as e:
log.info(e)
self.notify_status("write_error",{"write_error":e})
raise ErrorWritingToDevice("Write Error {0}".format(e))
self.stop()
if self.create_iso:
log.info("Starting create ISO operation")
self.notify_status("create_iso", \
{"create_iso":self.create_iso})
iso_creator = IsoCreator(self.target_path, slices,
self.image_name,
self.notify_status,
device.is_disk())
iso_creator.run()
if self.canceled:
log.info("Creation canceled")
self.notify_status("canceled", {"operation":
"Create image"})
else:
self.notify_status("finish")
log.info("Creation finished")
def create_image(self):
""" """
if is_mounted(self.device_path):
log.error("The partition {0} is mounted, please umount first, and try again".format(self.device_path))
self.notify_status("mounted_partition_error",{"mounted_partition_error":self.device_path})
raise DeviceIsMounted("Please umount first")
self.active = True
device = Device(self.device_path)
disk = Disk(device)
if device.is_disk():
try:
mbr = Mbr(self.target_path)
mbr.save_to_file(self.device_path)
dlm = DiskLayoutManager(self.target_path)
dlm.save_to_file(disk)
except Exception as e:
log.info(e)
self.notify_status("write_error", \
{"write_error":self.target_path})
raise ErrorWritingToDevice("Write error in {0}".format(self.target_path))
partition_list = disk.get_valid_partitions(self.raw)
if not partition_list:
raise ErrorCreatingImage("Partition(s) hasn't a " +\
"valid filesystem")
# check partitions filesystem
if not self.raw:
for part in partition_list:
log.info("Checking filesystem of {0}".format(part.get_path()))
self.notify_status("checking_filesystem",
{"device": part.get_path()})
if not part.filesystem.check():
log.error("{0} Filesystem is not clean".\
format(part.get_path()))
raise ErrorCreatingImage("{0} Filesystem is not clean".\
format(part.get_path()))
# fill partitions with zeroes
if self.raw and self.fill_with_zeros:
for part in partition_list:
log.info("{0} Filling with zeros".format(part.get_path()))
self.notify_status("filling_with_zeros", {"device":
part.get_path()})
part.filesystem.fill_with_zeros()
# get total size
total_bytes = 0
for part in partition_list:
total_bytes += part.filesystem.get_used_size()
self.total_blocks = long(math.ceil(total_bytes/float(BLOCK_SIZE)))
information = Information(self.target_path)
information.set_image_is_disk(device.is_disk())
information.set_image_name(self.image_name)
information.set_image_compressor_level(self.compressor_level)
if device.is_disk():
disk_info = DiskInfo()
disk_dict = disk_info.formated_disk(self.device_path)
information.set_disk_size(disk_dict["size"])
# TODO: Abstract this whole part, when creating isos,
# splitting in files, etc...
self.timer.start()
remaining_size = self.split_size
if self.create_iso:
remaining_size -= BASE_SYSTEM_SIZE
slices = dict() # Used when creating iso
iso_volume = 1 # Used when creating iso
for part in partition_list:
if not self.active: break
log.info("Creating image of {0}".format(part.get_path()))
self.notify_status("image_creator", \
{"image_creator ": part.get_path()})
number = part.get_number()
uuid = part.filesystem.uuid()
label = part.filesystem.read_label()
type = part.filesystem.type
part.filesystem.open_to_read()
#check if partclone is running
if type in ("ext2","ext3","ext4"):
self.partclone_stderr = part.filesystem.get_error_ext()
compact_callback = None
if self.compressor_level:
compressor = Compressor(self.compressor_level)
compact_callback = compressor.compact
self.buffer_manager = BufferManagerFactory(
part.filesystem.read_block,
self.notify_status,
compact_callback)
self.buffer_manager.start()
buffer = self.buffer_manager.output_buffer
volumes = 1
while self.active:
total_written = 0 # Used to help splitting the file
pattern = FILE_PATTERN.format(name=self.image_name,
partition=number,
volume=volumes)
file_path = self.target_path + pattern
try:
fd = open(file_path, "wb")
except Exception as e:
log.info(e)
self.notify_status("open_file", \
{"open_file":file_path})
raise ImageNotFound("The file wasn't found {0}". \
format(file_path))
next_partition = False
while self.active:
try:
data = buffer.get()
except IOError, e:
#self.notify_status("read_buffer_error", \
# {"read_buffer_error":str(e)})
if e.errno == errno.EINTR:
self.notify_status("read_buffer_error", \
{"read_buffer_error":str(e)})
data = ""
self.cancel()
raise ErrorReadingFromDevice(e)
break
if data == EOF:
if (self.partclone_stderr != None):
self.data_is_eof = True
while self.partclone_sucess == False:
pass
self.partclone_stderr = None
self.partclone_sucess = False
self.data_is_eof = False
next_partition = True
if self.create_iso:
remaining_size -= total_written
if not slices.has_key(iso_volume):
slices[iso_volume] = list()
slices[iso_volume].append(file_path)
break
try:
fd.write(data)
except Exception as e:
log.info("{0}".format(e))
self.notify_status("disk_full")
self.cancel()
raise ErrorWritingToDevice("Error in write file {0}".\
format(file_path))
self.processed_blocks += 1
if self.split_size:
bytes_written = len(data)
total_written += bytes_written
if (total_written + bytes_written) >= remaining_size:
volumes += 1
remaining_size = self.split_size
if self.create_iso:
if not slices.has_key(iso_volume):
slices[iso_volume] = list()
slices[iso_volume].append(file_path)
iso_volume += 1
break
try:
fd.close()
except Exception as e:
log.info(e)
self.notify_status("write_error",{"write_error":e})
raise ErrorCloseToWrite("Close Error {0}".format(e))
if next_partition: break
self.buffer_manager.join()
part.filesystem.close()
information.add_partition(number, type, volumes,
part.filesystem.get_used_size(),
uuid, label)