def fload(self,buf="",parent=None,package=None):
self.pname = os.path.split(self.fname)[1]
f = None
if buf == "":
offset = 0
f = open(self.fname,"rb")
buf = f.read()
if buf[0:7] == "\0\0IIXPR" or buf[0:7] == "\0\0MMXPR":
self.type = qxp.open(self, buf, parent)
return 0
if buf[:8] == "\x89PNG\x0d\x0a\x1a\x0a":
self.type = pngot.open(self, buf, parent)
return 0
if buf[0:6] == "\x1aWLF10":
self.type = vfb.open(self, buf, parent)
return 0
if buf[0:6] == "<?xml " or buf[0:14] == "\xff\xfe<\0?\0x\0m\0l\0 \0" or buf[0:14] == "\xfe\xff\0<\0?\0x\0m\0l\0 ":
self.type = otxml.open(buf, self, parent)
return 0
if buf[0:8] == "CPT9FILE":
self.type = cpt.open(buf, self, parent)
return 0
if buf[0:8] == "VjCD0100":
self.type = chdraw.open(self, buf, parent)
return 0
if buf[0:4] == "EVHD":
self.type = yep.parse(self, buf, parent)
return 0
if buf[0:4] == "XPIH":
self.type = yep.parse_ppi(self, buf, parent)
return 0
if buf[0:5].lower() == "{\\rtf":
self.type = rtf.open(buf, self, parent)
return 0
if buf[0:8] == "\xd0\xcf\x11\xe0\xa1\xb1\x1a\xe1":
self.type = ole.ole_open(buf, self, parent)
return 0
if buf[0:18] == "Visio (TM) Drawing":
self.type = vsd.parse(self, buf, parent)
return 0
if buf[0:2] == "\x50\xc3":
self.type = "CLP"
clp.open (buf,self, parent)
return 0
if buf[0:6] == "VCLMTF":
self.type = "SVM"
svm.open (buf,self, parent)
return 0
if buf[:4] == "\x12\x90\xa8\x7f":
nki.open(self,buf,parent)
return 0
# This one should be before CDR to properly handle v17
if parent != None:
parname = self.model.get_value(parent,0)
if parname == "[content]/dataFileList.dat":
print "Found XMLish CDR version"
self.wtable = self.model.get_value(parent,3).split("\n")
#elif ("[content/" in parname or "[font]/" in parname) and ".dat" in parname:
elif ".dat" in parname:
if self.wdata == None:
self.wdata = {}
p = parname.rfind("/")
self.wdata[parname[p+1:]] = parent
if buf[0:4] == "RIFF" and buf[8:11].lower() == "cdr":
self.type = "CDR%x"%(ord(buf[11])-0x30)
print ('Probably CDR')
cdr.cdr_open(buf,self, parent)
print (self.version)
return 0
if buf[0:4] == "RIFF" and buf[8:11] == "CMX":
self.type = "CMX"
cdr.cdr_open(buf,self, parent,"cmx")
return 0
if buf[0:2] == "WL":
self.type = "CDR2"
wld.open (buf,self, parent)
return 0
if buf[0:2] == "\xcc\xdc":
self.type = "CPL"
cpl.open (buf,self, parent)
return 0
if buf[0:4] == "8BGR":
self.type = "BGR"
abr.abr_open(buf,self, parent,"bgr")
return 0
if buf[4:8] == "8BIM":
self.type = "ABR"
abr.abr_open(buf,self, parent,"abr")
return 0
if buf[0:4] == "\xd7\xcd\xc6\x9a":
self.type = "APWMF"
mf.mf_open(buf,self, parent)
print ("Aldus Placeable WMF")
return 0
if buf[0:8] == "\x4c\x00\x52\x00\x46\x00\x00\x00":
self.type = "LRF"
lrf.open(buf, self, parent)
print ("LRF")
return 0
if buf[0:6] == "\x01\x00\x09\x00\x00\x03":
self.type = "WMF"
print ("Probably WMF")
mf.mf_open(buf,self, parent)
return 0
if buf[40:44] == "\x20\x45\x4d\x46":
self.type = "EMF"
print ("Probably EMF")
mf.mf_open(buf,self, parent)
return 0
if buf[0:2] =="KF" and buf[2] != "\x00":
self.type = "CDW"
print ("Probably CDW")
cdw.open(buf,self, parent)
return 0
if buf[0:4] == "CAT " and buf[0x8:0xc] == "REX2":
self.type = "REX2"
print ("Probably REX2")
rx2.open(buf,self, parent)
return 0
if buf[0:20] == "Kaydara FBX Binary ":
self.type = "FBX"
print ("Probably FBX")
fbx.open(buf,self, parent)
return 0
if buf[4:19] == "Standard Jet DB" or buf[4:19] == "Standard ACE DB":
self.type = "MDB"
print ("Probably MDB")
mdb.parse (buf,self, parent)
return 0
if buf[0:4] == "\x50\x4b\x03\x04":
self.type = "PKZIP"
print ("Probably PK-ZIP")
if f:
f.close()
pkzip.open (self.fname,self, parent)
return 0
palmtype = buf[0x3c:0x44]
if palmtype in palm.palm_types.keys():
self.type = "PALM"
print ("Probably Palm e-book")
palm.open(buf, self, parent, palmtype)
return 0
if buf[2:10] == 'BOOKDOUG':
self.type = 'IMP'
print ('Probably SoftBook e-book')
sbimp.open(buf, self, parent)
return 0
if buf[0:8] == 'ITOLITLS':
self.type = 'LIT'
print ('Probably LIT')
lit.open(buf,self,parent)
return 0
if buf[0:6] == 'bplist':
self.type = 'PLIST'
print ('Probably PLIST')
plist.open(buf,self,parent)
return 0
fh_off = buf.find('FreeHand')
if buf[0:3] == 'AGD':
agd_off = 0
agd_ver = ord(buf[agd_off+3])
try:
self.type = "FH"
print ("Probably Freehand")
fh.fh_open(buf,self)
return 0
except:
print ("Check for Freehand failed...")
elif fh_off != -1:
agd_off = buf.find('AGD')
if agd_off > fh_off:
agd_ver = ord(buf[agd_off+3])
try:
self.type = "FH"
print ("Probably Freehand 9+")
fh.fh_open(buf,self, parent)
return 0
except:
print ("Check for Freehand 9+ failed...")
if buf[0:4] == "FHD2" or buf[0:4] == "acf3":
self.type = "FH12"
fh12.fh_open(buf, self, parent, 0)
return 0
if buf[0:2] == "FH":
fh_off = buf.find('FHDocHeader')
if fh_off != -1:
try:
self.type = "FH"
print ("Probably Freehand <5")
fh.fh_open(buf, self, parent, 0)
return 0
except:
print ("Check for Freehand <5 failed...")
if buf[8:11] == 'xV4':
self.type = 'ZMF'
print ('Probably Zoner Draw 4+')
zmf.zmf4_open(buf, self, parent)
return 0
# NOTE: 0x29a is 666 in decimal .-)
if buf[0:2] == '\x9a\x02' and buf[2:4] in ['\01\0', '\02\0', '\03\0', '\04\0']:
self.type = 'ZBR'
print ('Probably Zebra Metafile')
zbr.open(buf, self, parent)
return 0
if buf[0:9] == 'ZonerBMIa':
self.type = 'BMI'
print ('Probably Zoner Bitmap')
bmi.open(buf, self, parent)
return 0
size = (ord(buf[1]) | (ord(buf[2]) << 8)) + 4
if buf[0] == '\0' and (size == len(buf) or (size < len(buf) and buf[4:7] == "\x80\x80\x04")):
self.type = 'IWA'
if not self.subtype:
self.subtype = iwa.detect(package)
print('Probably Apple iWork file')
iwa.open(buf, self, parent, self.subtype)
return 0
if buf[0:0x17] == 'Software602\r\nCalc602 v.' and (buf[0x1c:0x24] == 'Tabulka\x1a' or buf[0x1c:0x21] == 'Graf\x1a'):
self.type = 'C602'
print('Probably C602 file')
if buf[0x1c] == 'T':
c602.parse_spreadsheet(buf, self, parent)
else:
c602.parse_chart(buf, self, parent)
return 0
if re.match('@[A-Z]{2} .*?\\r\\n', buf) and buf[-1] == '\x1a':
self.type = 'T602'
print('Probably T602 file')
t602.parse(buf, self, parent)
return 0
if buf[0:4] == "\0\0\x02\0":
if (buf[4]=='\x20' or buf[4]=='\x21') and buf[5]=='\x51':
self.type = 'QUWQ'
print('Probably Quattro Wq file')
quattro_wq.wq_open(self, buf, parent)
return 0
# QuarkXPress 1.x data fork
if buf[0:4] == '\x00\x1c\x00\x1c' or buf[0:4] == '\x00\x20\x00\x20':
try:
qxp.open_v1(self,buf,parent)
self.type = 'QXP5'
return 0
except:
print ("Failed after attempt to parse as QXP1...")
if buf[0:4] == '\x00\x26\x00\x26':
try:
qxp.open_v2(self,buf,parent)
self.type = 'QXP5'
return 0
except:
print ("Failed after attempt to parse as QXP2...")
if parent == None:
parent = add_pgiter(self, "File", "file","unknown",buf)
# Likely false detection for DRW
if buf[0:3] == "\x01\xff\x02":
try:
drw.open(self,buf,parent)
self.model.set_value(parent, 0, "DRW")
except:
print ("Failed after attempt to parse as DRW...")
if buf[0:4] == "\xe7\xac\x2c\x00":
self.type = 'pub1'
print('Probably publisher 1 file')
publisher1.publisher_open(self, buf, parent)
return 0
def parse (cmd, entry, page):
if cmd[0] == "$":
pos = cmd.find("@")
if pos != -1:
chtype = cmd[1:pos]
chaddr = cmd[pos+1:]
else:
chtype = cmd[1:]
chaddr = "0"
print "Command: ",chtype,chaddr
treeSelection = page.view.get_selection()
model, iter1 = treeSelection.get_selected()
if iter1 == None:
page.view.set_cursor_on_cell(0)
treeSelection = page.view.get_selection()
model, iter1 = treeSelection.get_selected()
buf = model.get_value(iter1,3)
if "ole" == chtype.lower():
if buf[int(chaddr,16):int(chaddr,16)+8] == "\xd0\xcf\x11\xe0\xa1\xb1\x1a\xe1":
ole.ole_open (buf[int(chaddr,16):],page,iter1)
else:
print "OLE stream not found at ",chaddr
elif "bmp" == chtype.lower():
#try:
if 1:
addr,bpp,w,h = chaddr.split(":")
dib_data = "\x28\x00\x00\x00"+struct.pack("<I",int(w))+struct.pack("<I",int(h))+"\x01\x00"
dib_data += struct.pack("<H",int(bpp))+"\x00"*8+struct.pack("<I",160)*2+"\x00"*8
dib_data += buf[int(addr,16):]
iter2 = add_pgiter (page,"[BMP]","escher","Blip",dib2bmp(dib_data),iter1)
model.set_value(iter2,1,("escher","odraw","Blip"))
#except:
# print 'Failed to construct DIB data'
elif "b64" == chtype.lower():
b64decode (page,buf[int(chaddr,16):],iter1)
elif "cvx" == chtype.lower():
cvx.parse (page,buf[int(chaddr,16):],iter1)
elif "esc" == chtype.lower():
escher.parse (model,buf[int(chaddr,16):],iter1)
elif "cmx" == chtype.lower():
cdr.cdr_open (buf[int(chaddr,16):],page,iter1)
elif "icc" == chtype.lower():
icc.parse (page,buf[int(chaddr,16):],iter1)
elif "cdx" == chtype.lower():
chdraw.open (page,buf[int(chaddr,16):],iter1)
elif "yep" == chtype.lower():
yep.parse (page,buf[int(chaddr,16):],iter1)
elif "yep0" == chtype.lower():
yep.parse (page,buf[int(chaddr,16):],iter1,0)
elif "emf" == chtype.lower():
pt = page.type
page.type = "EMF"
mf.mf_open (buf[int(chaddr,16):],page,iter1)
page.type = pt
elif "pix" == chtype.lower():
# try:
off = int(chaddr,16)
ntype = model.get_value(iter1,1)
if off:
iter2 = add_pgiter(page,"Picture","escher","Blip",buf[off:],iter1)
model.set_value(iter2,1,("escher","odraw","Blip"))
else:
model.set_value(iter1,1,("escher","odraw","Blip"))
page.hd.hv.parent.on_row_activated(page.hd.hv,model.get_path(iter1),None)
# except:
# print "Failed to add as a picture"
elif "dump" == chtype.lower():
dlg = gtk.FileChooserDialog('Save...', action=gtk.FILE_CHOOSER_ACTION_SAVE, buttons=(gtk.STOCK_OK,gtk.RESPONSE_OK,gtk.STOCK_CANCEL,gtk.RESPONSE_CANCEL))
dlg.set_local_only(True)
resp = dlg.run()
fname = dlg.get_filename()
dlg.hide()
if resp != gtk.RESPONSE_CANCEL:
nlen = model.get_value(iter1,2)
if chaddr != 0:
pos = chaddr.find(":")
if pos != -1:
endaddr = chaddr[pos+1:]
chaddr = chaddr[:pos]
value = model.get_value(iter1,3)[int(chaddr,16):int(endaddr,16)]
else:
value = model.get_value(iter1,3)[int(chaddr,16):]
else:
value = model.get_value(iter1,3)[int(chaddr,16):]
if nlen != None:
f = open(fname,'wb')
f.write(value)
f.close()
else:
print "Nothing to save"
elif "wmf" == chtype.lower() or "apwmf" == chtype.lower():
pt = page.type
page.type = chtype.upper()
mf.mf_open (buf[int(chaddr,16):],page,iter1)
page.type = pt
elif "xls" == chtype.lower():
ch2 = chaddr[1]
if ch2.isdigit():
coladdr = ord(chaddr[0].lower()) - 97
rowaddr = int(chaddr[1:]) - 1
else:
coladdr = 26*(ord(chaddr[0].lower()) - 96)+ ord(chaddr[1].lower()) - 97
rowaddr = int(chaddr[2:]) - 1
page.search = gtk.TreeStore(gobject.TYPE_STRING, gobject.TYPE_INT, gobject.TYPE_STRING, gobject.TYPE_INT)
model.foreach(xlsfind,(page,rowaddr,coladdr))
page.show_search("XLS: cell %s"%chaddr)
elif "rx2" == chtype.lower():
newL = struct.unpack('>I', buf[int(chaddr,16)+4:int(chaddr,16)+8])[0]
rx2.parse (model,buf[int(chaddr,16):int(chaddr,16)+newL],0,iter1)
elif "dib" == chtype.lower():
iter2 = add_pgiter (page,"[BMP]","",0,dib2bmp(buf[int(chaddr,16):]),iter1)
model.set_value(iter2,1,("escher","odraw","Blip"))
elif "pct" == chtype.lower():
pict.parse (page,buf,iter1)
elif "pm6" == chtype.lower():
off = int(chaddr,16)
pm6.open (page,buf,iter1,off)
elif "vba" == chtype.lower():
# off = int(chaddr,16)
vba.parse (page,buf,iter1)
elif "zip" == chtype.lower():
try:
print int(chaddr,16)
decobj = zlib.decompressobj()
output = decobj.decompress(buf[int(chaddr,16):])
add_pgiter (page,"[Decompressed data]","",0,output,iter1)
tail = decobj.unused_data
if len(tail) > 0:
add_pgiter (page,"[Tail]","",0,tail,iter1)
except:
print "Failed to decompress"
elif cmd[0] == "?":
ctype = cmd[1]
carg = cmd[2:]
# convert line to hex or unicode if required
data = arg_conv(ctype,carg)
model = page.view.get_model()
page.search = gtk.TreeStore(gobject.TYPE_STRING, gobject.TYPE_INT, gobject.TYPE_STRING, gobject.TYPE_INT)
if ctype == 'r' or ctype == 'R':
model.foreach(recfind,(page,data))
else:
model.foreach(cmdfind,(page,data))
page.show_search(carg)
def parse (cmd, entry, page):
if cmd[0] == "$":
pos = cmd.find("@")
if pos != -1:
chtype = cmd[1:pos]
chaddr = cmd[pos+1:]
else:
chtype = cmd[1:]
chaddr = "0"
print("Command: ",chtype,chaddr)
treeSelection = page.view.get_selection()
model, iter1 = treeSelection.get_selected()
if iter1 == None:
page.view.set_cursor_on_cell(0)
treeSelection = page.view.get_selection()
model, iter1 = treeSelection.get_selected()
buf = model.get_value(iter1,3)
if "ole" == chtype.lower():
if buf[int(chaddr,16):int(chaddr,16)+8] == "\xd0\xcf\x11\xe0\xa1\xb1\x1a\xe1":
ole.ole_open (buf[int(chaddr,16):],page,iter1)
else:
print("OLE stream not found at ",chaddr)
elif "bmp" == chtype.lower():
#try:
if 1:
addr,bpp,w,h = chaddr.split(":")
dib_data = "\x28\x00\x00\x00"+struct.pack("<I",int(w))+struct.pack("<I",int(h))+"\x01\x00"
dib_data += struct.pack("<H",int(bpp))+"\x00"*8+struct.pack("<I",160)*2+"\x00"*8
dib_data += buf[int(addr,16):]
iter2 = add_pgiter (page,"[BMP]","escher","Blip",dib2bmp(dib_data),iter1)
model.set_value(iter2,1,("escher","odraw","Blip"))
#except:
# print 'Failed to construct DIB data'
elif "b64" == chtype.lower():
b64decode (page,buf[int(chaddr,16):],iter1)
elif "cvx" == chtype.lower():
cvx.parse (page,buf[int(chaddr,16):],iter1)
elif "esc" == chtype.lower():
escher.parse (model,buf[int(chaddr,16):],iter1)
elif "cmx" == chtype.lower():
cdr.cdr_open (buf[int(chaddr,16):],page,iter1)
elif "icc" == chtype.lower():
icc.parse (page,buf[int(chaddr,16):],iter1)
elif "cdx" == chtype.lower():
chdraw.open (page,buf[int(chaddr,16):],iter1)
elif "yep" == chtype.lower():
yep.parse (page,buf[int(chaddr,16):],iter1)
elif "yep0" == chtype.lower():
yep.parse (page,buf[int(chaddr,16):],iter1,0)
elif "emf" == chtype.lower():
pt = page.type
page.type = "EMF"
mf.mf_open (buf[int(chaddr,16):],page,iter1)
page.type = pt
elif "pix" == chtype.lower():
# try:
off = int(chaddr,16)
ntype = model.get_value(iter1,1)
if off:
iter2 = add_pgiter(page,"Picture","escher","Blip",buf[off:],iter1)
model.set_value(iter2,1,("escher","odraw","Blip"))
else:
model.set_value(iter1,1,("escher","odraw","Blip"))
page.hd.hv.parent.on_row_activated(page.hd.hv,model.get_path(iter1),None)
# except:
# print "Failed to add as a picture"
elif "dump" == chtype.lower():
dlg = gtk.FileChooserDialog('Save...', action=gtk.FILE_CHOOSER_ACTION_SAVE, buttons=(gtk.STOCK_OK,gtk.RESPONSE_OK,gtk.STOCK_CANCEL,gtk.RESPONSE_CANCEL))
dlg.set_local_only(True)
resp = dlg.run()
fname = dlg.get_filename()
dlg.hide()
if resp != gtk.RESPONSE_CANCEL:
nlen = model.get_value(iter1,2)
if chaddr != 0:
pos = chaddr.find(":")
if pos != -1:
endaddr = chaddr[pos+1:]
chaddr = chaddr[:pos]
value = model.get_value(iter1,3)[int(chaddr,16):int(endaddr,16)]
else:
value = model.get_value(iter1,3)[int(chaddr,16):]
else:
value = model.get_value(iter1,3)[int(chaddr,16):]
if nlen != None:
f = open(fname,'wb')
f.write(value)
f.close()
else:
print("Nothing to save")
elif "wmf" == chtype.lower() or "apwmf" == chtype.lower():
pt = page.type
page.type = chtype.upper()
mf.mf_open (buf[int(chaddr,16):],page,iter1)
page.type = pt
elif "xls" == chtype.lower():
ch2 = chaddr[1]
if ch2.isdigit():
coladdr = ord(chaddr[0].lower()) - 97
rowaddr = int(chaddr[1:]) - 1
else:
coladdr = 26*(ord(chaddr[0].lower()) - 96)+ ord(chaddr[1].lower()) - 97
rowaddr = int(chaddr[2:]) - 1
page.search = gtk.TreeStore(gobject.TYPE_STRING, gobject.TYPE_INT, gobject.TYPE_STRING, gobject.TYPE_INT)
model.foreach(xlsfind,(page,rowaddr,coladdr))
page.show_search("XLS: cell %s"%chaddr)
elif "rx2" == chtype.lower():
newL = struct.unpack('>I', buf[int(chaddr,16)+4:int(chaddr,16)+8])[0]
rx2.parse (model,buf[int(chaddr,16):int(chaddr,16)+newL],0,iter1)
elif "dib" == chtype.lower():
iter2 = add_pgiter (page,"[BMP]","",0,dib2bmp(buf[int(chaddr,16):]),iter1)
model.set_value(iter2,1,("escher","odraw","Blip"))
elif "pct" == chtype.lower():
pict.parse (page,buf,iter1)
elif "pm6" == chtype.lower():
off = int(chaddr,16)
pm6.open (page,buf,iter1,off)
elif "vba" == chtype.lower():
# off = int(chaddr,16)
vba.parse (page,buf,iter1)
elif "zip" == chtype.lower():
try:
print(int(chaddr,16))
decobj = zlib.decompressobj()
output = decobj.decompress(buf[int(chaddr,16):])
add_pgiter (page,"[Decompressed data]","",0,output,iter1)
tail = decobj.unused_data
if len(tail) > 0:
add_pgiter (page,"[Tail]","",0,tail,iter1)
except:
print("Failed to decompress as zlib")
try:
f = StringIO.StringIO(buf[int(chaddr,16):])
pkzip.open(f, page, iter1)
f.close()
except:
print("Failed to decompress as pkzip")
elif cmd[0] == "?":
ctype = cmd[1]
carg = cmd[2:]
# convert line to hex or unicode if required
data = arg_conv(ctype,carg)
model = page.view.get_model()
page.search = gtk.TreeStore(gobject.TYPE_STRING, gobject.TYPE_INT, gobject.TYPE_STRING, gobject.TYPE_INT)
if ctype == 'r' or ctype == 'R':
model.foreach(recfind,(page,data))
else:
model.foreach(cmdfind,(page,data))
page.show_search(carg)
def fload(self,buf="",parent=None,package=None):
self.pname = os.path.split(self.fname)[1]
if buf == "":
offset = 0
f = open(self.fname,"rb")
buf = f.read()
if buf[2:8] == "IIXPR3":
self.type = qxp.open(self, buf, parent)
return 0
if buf[:8] == "\x89PNG\x0d\x0a\x1a\x0a":
self.type = pngot.open(self, buf, parent)
return 0
if buf[0:6] == "\x1aWLF10":
self.type = vfb.open(self, buf, parent)
return 0
if buf[0:6] == "<?xml " or buf[0:14] == "\xff\xfe<\0?\0x\0m\0l\0 \0" or buf[0:14] == "\xfe\xff\0<\0?\0x\0m\0l\0 ":
self.type = otxml.open(buf, self, parent)
return 0
if buf[0:8] == "CPT9FILE":
self.type = cpt.open(buf, self, parent)
return 0
if buf[0:8] == "VjCD0100":
self.type = chdraw.open(self, buf, parent)
return 0
if buf[0:4] == "EVHD":
self.type = yep.parse(self, buf, parent)
return 0
if buf[0:4] == "XPIH":
self.type = yep.parse_ppi(self, buf, parent)
return 0
if buf[0:5].lower() == "{\\rtf":
self.type = rtf.open(buf, self, parent)
return 0
if buf[0:8] == "\xd0\xcf\x11\xe0\xa1\xb1\x1a\xe1":
self.type = ole.ole_open(buf, self, parent)
return 0
if buf[0:18] == "Visio (TM) Drawing":
self.type = vsd.parse(self, buf, parent)
return 0
if buf[0:2] == "\x50\xc3":
self.type = "CLP"
clp.open (buf,self, parent)
return 0
if buf[0:6] == "VCLMTF":
self.type = "SVM"
svm.open (buf,self, parent)
return 0
if buf[:4] == "\x12\x90\xa8\x7f":
nki.open(self,buf,parent)
return 0
# This one should be before CDR to properly handle v17
if parent != None:
parname = self.model.get_value(parent,0)
if parname == "[content]/dataFileList.dat":
print "Found XMLish CDR version"
self.wtable = self.model.get_value(parent,3).split("\n")
elif "[content]/" in parname and ".dat" in parname:
if self.wdata == None:
self.wdata = {}
p = parname.rfind("/")
self.wdata[parname[p+1:]] = parent
if buf[0:4] == "RIFF" and buf[8:11].lower() == "cdr":
self.type = "CDR%x"%(ord(buf[11])-0x30)
print 'Probably CDR',
cdr.cdr_open(buf,self, parent)
print self.version
return 0
if buf[0:4] == "RIFF" and buf[8:11] == "CMX":
self.type = "CMX"
cdr.cdr_open(buf,self, parent,"cmx")
return 0
if buf[0:2] == "WL":
self.type = "CDR2"
wld.open (buf,self, parent)
return 0
if buf[0:2] == "\xcc\xdc":
self.type = "CPL"
cpl.open (buf,self, parent)
return 0
if buf[0:4] == "8BGR":
self.type = "BGR"
abr.abr_open(buf,self, parent,"bgr")
return 0
if buf[4:8] == "8BIM":
self.type = "ABR"
abr.abr_open(buf,self, parent,"abr")
return 0
if buf[0:4] == "\xd7\xcd\xc6\x9a":
self.type = "APWMF"
mf.mf_open(buf,self, parent)
print "Aldus Placeable WMF"
return 0
if buf[0:8] == "\x4c\x00\x52\x00\x46\x00\x00\x00":
self.type = "LRF"
lrf.open(buf, self, parent)
print "LRF"
return 0
if buf[0:6] == "\x01\x00\x09\x00\x00\x03":
self.type = "WMF"
print "Probably WMF"
mf.mf_open(buf,self, parent)
return 0
if buf[40:44] == "\x20\x45\x4d\x46":
self.type = "EMF"
print "Probably EMF"
mf.mf_open(buf,self, parent)
return 0
if buf[0:2] =="KF" and buf[2] != "\x00":
self.type = "CDW"
print "Probably CDW"
cdw.open(buf,self, parent)
return 0
if buf[0:4] == "CAT " and buf[0x8:0xc] == "REX2":
self.type = "REX2"
print "Probably REX2"
rx2.open(buf,self, parent)
return 0
if buf[0:20] == "Kaydara FBX Binary ":
self.type = "FBX"
print "Probably FBX"
fbx.open(buf,self, parent)
return 0
if buf[4:19] == "Standard Jet DB" or buf[4:19] == "Standard ACE DB":
self.type = "MDB"
print "Probably MDB"
mdb.parse (buf,self, parent)
return 0
if buf[0:4] == "\x50\x4b\x03\x04":
self.type = "PKZIP"
print "Probably PK-ZIP"
f.close()
pkzip.open (self.fname,self, parent)
return 0
pdbtype = buf[0x3c:0x44]
if pdbtype in pdb.pdb_types.keys():
self.type = "PDB"
print "Probably Palm e-book"
pdb.open(buf, self, parent, pdbtype)
return 0
if buf[2:10] == 'BOOKDOUG':
self.type = 'IMP'
print 'Probably SoftBook e-book'
sbimp.open(buf, self, parent)
return 0
if buf[0:8] == 'ITOLITLS':
self.type = 'LIT'
print 'Probably LIT'
lit.open(buf,self,parent)
return 0
if buf[0:6] == 'bplist':
self.type = 'PLIST'
print 'Probably PLIST'
plist.open(buf,self,parent)
return 0
fh_off = buf.find('FreeHand')
if buf[0:3] == 'AGD':
agd_off = 0
agd_ver = ord(buf[agd_off+3])
try:
self.type = "FH"
print "Probably Freehand"
fh.fh_open(buf,self)
return 0
except:
print "Check for Freehand failed..."
elif fh_off != -1:
agd_off = buf.find('AGD')
if agd_off > fh_off:
agd_ver = ord(buf[agd_off+3])
try:
self.type = "FH"
print "Probably Freehand 9+"
fh.fh_open(buf,self, parent)
return 0
except:
print "Check for Freehand 9+ failed..."
else:
fh_off = buf.find('FHDocHeader')
if fh_off != -1:
if buf[0:2] == "FH":
self.type = "FH"
print "Probably Freehand <5"
fh.fh_open(buf, self, parent, 0)
return 0
if buf[0:4] == "FHD2" or buf[0:4] == "acf3":
self.type = "FH12"
fh12.fh_open(buf, self, parent, 0)
return 0
if buf[8:11] == 'xV4':
self.type = 'ZMF'
print 'Probably Zoner Draw 4+'
zmf.zmf4_open(buf, self, parent)
return 0
# NOTE: 0x29a is 666 in decimal .-)
if buf[0:2] == '\x9a\x02' and buf[2:4] in ['\01\0', '\02\0', '\03\0', '\04\0']:
self.type = 'ZBR'
print 'Probably Zebra Metafile'
zbr.open(buf, self, parent)
return 0
size = (ord(buf[1]) | (ord(buf[2]) << 8)) + 4
if buf[0] == '\0' and (size == len(buf) or (size < len(buf) and buf[4:7] == "\x80\x80\x04")):
self.type = 'IWA'
if not self.subtype:
self.subtype = iwa.detect(package)
print('Probably Apple iWork file')
iwa.open(buf, self, parent, self.subtype)
return 0
if buf[0:0x17] == 'Software602\r\nCalc602 v.' and (buf[0x1c:0x24] == 'Tabulka\x1a' or buf[0x1c:0x21] == 'Graf\x1a'):
self.type = 'C602'
print('Probably C602 file')
if buf[0x1c] == 'T':
c602.parse_spreadsheet(buf, self, parent)
else:
c602.parse_chart(buf, self, parent)
return 0
if parent == None:
parent = add_pgiter(self, "File", "file","unknown",buf)
# Likely false detection for DRW
if buf[0:3] == "\x01\xff\x02":
try:
drw.open(self,buf,parent)
self.model.set_value(parent, 0, "DRW")
except:
print "Failed after attempt to parse as DRW..."
return 0