def __init__(self,
text,
blackboxes,
warnings=False,
error_on_warning=False):
"""
Initializes a new transformer.
Parameters
----------
text: str
The netlist that the transformer will be used on, used for
error messages.
blackboxes: list of circuitgraph.BlackBox
The blackboxes present in the netlist that will be parsed.
warnings: bool
If True, warnings about unused nets will be printed.
error_on_warning: bool
If True, unused nets will cause raise `VerilogParsingWarning`
exceptions.
"""
self.c = Circuit()
self.text = text
self.blackboxes = blackboxes
self.warnings = warnings
self.error_on_warning = error_on_warning
self.tie0 = self.c.add("tie0", "0")
self.tie1 = self.c.add("tie1", "1")
self.io = set()
self.inputs = set()
self.outputs = set()
self.wires = set()
def copy(c):
"""
Returns copy of a circuit.
Parameters
----------
c : Circuit
Input circuit.
Returns
-------
Circuit
Circuit copy.
"""
return Circuit(graph=c.graph.copy(),
name=c.name,
blackboxes=c.blackboxes.copy())
def relabel(c, mapping):
"""
Builds copy with relabeled nodes.
Parameters
----------
c : Circuit
Input circuit.
mapping : dict of str:str
Relabeling of nodes.
Returns
-------
Circuit
Circuit with removed blackboxes.
"""
g = nx.relabel_nodes(c.graph, mapping)
return Circuit(graph=g, name=c.name, blackboxes=c.blackboxes.copy())
def strip_blackboxes(c, ignore_pins=None):
"""
Converts blackboxes to io.
Parameters
----------
c : Circuit
Input circuit.
ingnore_pins: str or list of str
Pins to not create io for, just disconnect and delete.
Returns
-------
Circuit
Circuit with removed blackboxes.
"""
if not ignore_pins:
ignore_pins = []
elif isinstance(ignore_pins, str):
ignore_pins = [ignore_pins]
g = c.graph.copy()
bb_pins = []
for n in c.filter_type("bb_input"):
if n.split(".")[-1] in ignore_pins:
g.remove_node(n)
else:
g.nodes[n]["type"] = "output"
bb_pins.append(n)
for n in c.filter_type("bb_output"):
if n.split(".")[-1] in ignore_pins:
g.remove_node(n)
else:
g.nodes[n]["type"] = "input"
bb_pins.append(n)
# rename nodes
mapping = {n: n.replace(".", "_") for n in bb_pins}
for k in mapping.values():
if k in g:
raise ValueError(f"Overlapping blackbox name: {k}")
nx.relabel_nodes(g, mapping, copy=False)
return Circuit(graph=g, name=c.name)
def strip_outputs(c):
"""
Removes a circuit's outputs for easy
instantiation.
Parameters
----------
c : Circuit
Input circuit.
Returns
-------
Circuit
Circuit with removed io
"""
g = c.graph.copy()
for o in c.outputs():
g.nodes[o]["type"] = "buf"
return Circuit(graph=g, name=c.name, blackboxes=c.blackboxes.copy())
def strip_inputs(c):
"""
Converts inputs to buffers for easy
instantiation.
Parameters
----------
c : Circuit
Input circuit.
Returns
-------
Circuit
Circuit with removed io
"""
g = c.graph.copy()
for i in c.inputs():
g.nodes[i]["type"] = "buf"
return Circuit(graph=g, name=c.name, blackboxes=c.blackboxes.copy())
def bench_to_circuit(bench, name):
"""
Creates a new Circuit from a bench string.
Parameters
----------
bench: str
bench code.
name: str
the module name.
Returns
-------
Circuit
the parsed circuit.
"""
# create circuit
c = Circuit(name=name)
# get inputs
in_regex = r"(?:INPUT|input)\s*\((.+?)\)"
for net_str in re.findall(in_regex, bench, re.DOTALL):
nets = net_str.replace(" ", "").replace("\n",
"").replace("\t",
"").split(",")
for n in nets:
c.add(n, "input")
# handle gates
regex = r"(\S+)\s*=\s*(NOT|OR|NOR|AND|NAND|XOR|XNOR|not|or|nor|and|nand|not|xor|xnor)\((.+?)\)"
for net, gate, input_str in re.findall(regex, bench):
# parse all nets
inputs = (input_str.replace(" ",
"").replace("\n",
"").replace("\t",
"").split(","))
# get outputs
in_regex = r"(?:OUTPUT|output)\s*\((.+?)\)"
for net_str in re.findall(in_regex, bench, re.DOTALL):
nets = net_str.replace(" ", "").replace("\n",
"").replace("\t",
"").split(",")
for n in nets:
c.set_output(n)
return c
def circuit_to_verilog(c):
"""
Generates a str of Verilog code from a `CircuitGraph`.
Parameters
----------
c: Circuit
the circuit to turn into Verilog.
Returns
-------
str
Verilog code.
"""
c = Circuit(graph=c.graph.copy(),
name=c.name,
blackboxes=c.blackboxes.copy())
# sanitize escaped nets
for node in c.nodes():
if node.startswith("\\"):
c.relabel({node: node + " "})
inputs = list(c.inputs())
outputs = list(c.outputs())
insts = []
wires = []
# remove outputs drivers
driver_mapping = dict()
for output in outputs:
if len(c.fanin(output)) > 1:
raise ValueError(f"Output {output} has multiple drivers.")
elif len(c.fanin(output)) == 1:
driver = c.fanin(output).pop()
if c.type(driver) in ["input", "1", "0"]:
driver = c.add(f"{output}_driver",
type="buf",
fanin=driver,
uid=True)
driver_mapping[driver] = output
c.remove(c.outputs())
c.relabel(driver_mapping)
# blackboxes
output_map = {}
for name, bb in c.blackboxes.items():
io = []
for n in bb.inputs():
driver = c.fanin(f"{name}.{n}").pop()
io += [f".{n}({driver})"]
for n in bb.outputs():
w = c.uid(f"{name}_{n}_load")
wires.append(w)
output_map[f"{name}.{n}"] = w
io += [f".{n}({w})"]
io_def = ", ".join(io)
insts.append(f"{bb.name} {name} ({io_def})")
# gates
for n in c.nodes():
if c.type(n) in [
"xor", "xnor", "buf", "not", "nor", "or", "and", "nand"
]:
fanin = [
output_map[f] if f in output_map else f for f in c.fanin(n)
]
fanin = ", ".join(fanin)
insts.append(f"{c.type(n)} g_{len(insts)} " f"({n}, {fanin})")
wires.append(n)
elif c.type(n) in ["0", "1"]:
insts.append(f"assign {n} = 1'b{c.type(n)}")
wires.append(n)
elif c.type(n) in ["input", "output", "bb_input", "bb_output"]:
pass
else:
raise ValueError(f"unknown gate type: {c.type(n)}")
verilog = f"module {c.name} ("
verilog += ", ".join(inputs + outputs)
verilog += ");\n"
verilog += "".join(f" input {inp};\n" for inp in inputs)
verilog += "\n"
verilog += "".join(f" output {out};\n" for out in outputs)
verilog += "\n"
verilog += "".join(f" wire {wire};\n" for wire in wires)
verilog += "\n"
verilog += "".join(f" {inst};\n" for inst in insts)
verilog += "endmodule\n"
return verilog
def xor_hash(n, m):
"""
Create a XOR hash function H_{xor}(n,m,3) as in:
Chakraborty, Supratik, Kuldeep S. Meel, and Moshe Y. Vardi. "A scalable approximate model counter." International Conference on Principles and Practice of Constraint Programming. Springer, Berlin, Heidelberg, 2013.
Each output of the hash is the xor/xnor of a random subset of the input.
Parameters
----------
n : int
Input width of the hash function.
m : int
Output width of the hash function.
Returns
-------
Circuit
XOR hash function.
"""
h = Circuit()
for i in range(n):
h.add(f"in_{i}", "input")
for o in range(m):
h.add(f"out_{o}", "output")
# select inputs
cons = [random() < 0.5 for i in range(n)]
if sum(cons) == 0:
# constant output
h.add(f"c_{o}", "1" if random() < 0.5 else "0", fanout=f"out_{o}")
else:
# choose between xor/xnor
h.add(f"xor_{o}", "xor", fanout=f"out_{o}")
h.add(f"c_{o}", "1" if random() < 0.5 else "0", fanout=f"xor_{o}")
for i, con in enumerate(cons):
if con:
h.connect(f"in_{i}", f"xor_{o}")
return h
class VerilogCircuitGraphTransformer(Transformer):
"""
A lark.Transformer that transforms a parsed verilog netlist into a
circuitgraph.Circuit.
"""
def __init__(self,
text,
blackboxes,
warnings=False,
error_on_warning=False):
"""
Initializes a new transformer.
Parameters
----------
text: str
The netlist that the transformer will be used on, used for
error messages.
blackboxes: list of circuitgraph.BlackBox
The blackboxes present in the netlist that will be parsed.
warnings: bool
If True, warnings about unused nets will be printed.
error_on_warning: bool
If True, unused nets will cause raise `VerilogParsingWarning`
exceptions.
"""
self.c = Circuit()
self.text = text
self.blackboxes = blackboxes
self.warnings = warnings
self.error_on_warning = error_on_warning
self.tie0 = self.c.add("tie0", "0")
self.tie1 = self.c.add("tie1", "1")
self.io = set()
self.inputs = set()
self.outputs = set()
self.wires = set()
# Helper functions
def add_node(self, n, node_type, fanin=[], fanout=[], uid=False):
"""So that nodes are of type `str`, not `lark.Token`"""
if type(fanin) not in [list, set]:
fanin = [fanin]
if type(fanout) not in [list, set]:
fanout = [fanout]
fanin = [str(i) for i in fanin]
fanout = [str(i) for i in fanout]
node_type = str(node_type)
for i in fanout + fanin:
if i not in self.c:
self.c.add(i, "buf")
return self.c.add(
str(n),
node_type,
fanin=fanin,
fanout=fanout,
uid=uid,
)
def add_blackbox(self, blackbox, name, connections=dict()):
formatted_connections = dict()
for key in connections:
formatted_connections[str(key)] = str(connections[key])
if str(connections[key]) not in self.c:
self.c.add(str(connections[key]), "buf")
self.c.add_blackbox(blackbox, str(name), formatted_connections)
def warn(self, message):
if self.error_on_warning:
raise VerilogParsingWarning(message)
else:
print(f"Warning: {message}")
def check_for_warnings(self):
for wire in self.wires:
if wire not in self.c.nodes():
self.warn(f"{wire} declared as wire but isn't connected.")
for n in self.c.nodes():
if self.c.type(n) not in ["output", "bb_input"
] and not self.c.fanout(n):
self.warn(f"{n} doesn't drive any nets.")
elif self.c.type(n) not in [
"input",
"0",
"1",
"bb_output",
] and not self.c.fanin(n):
self.warn(f"{n} doesn't have any drivers.")
# 1. Source text
def start(self, description):
return description
def module(self, module_name_and_list_of_ports_and_module_items):
self.c.name = str(module_name_and_list_of_ports_and_module_items[0])
# Check if ports list matches with inputs and outputs
if not self.inputs <= self.io:
i = (self.inputs - self.io).pop()
raise VerilogParsingError(
f"{i} declared as output but not in port list", i, self.text)
if not self.outputs <= self.io:
o = (self.outputs - self.io).pop()
raise VerilogParsingError(
f"{o} declared as output but not in port list", o, self.text)
if not self.io <= (self.inputs | self.outputs):
v = (self.io - (self.inputs | self.outputs)).pop()
raise VerilogParsingError(
f"{v} in port list but was not declared as input or output",
v,
self.text,
)
# Relabel outputs using drivers
for o in self.outputs:
o = str(o)
if self.c.fanin(o):
o_driver = f"{o}_driver"
while o_driver in self.c.nodes():
o_driver += "_0"
self.c.relabel({o: o_driver})
self.add_node(o, "output")
self.c.connect(o_driver, o)
# Remove tie0, tie1 if not used
if not self.c.fanout(self.tie0):
self.c.remove(self.tie0)
if not self.c.fanout(self.tie1):
self.c.remove(self.tie1)
# Check for warnings
if self.warnings:
self.check_for_warnings()
return self.c
def list_of_ports(self, ports):
for port in ports:
self.io.add(port)
# 2. Declarations
def input_declaration(self, list_of_variables):
[list_of_variables] = list_of_variables
self.inputs.update(list_of_variables)
for variable in list_of_variables:
self.add_node(variable, "input")
def output_declaration(self, list_of_variables):
[list_of_variables] = list_of_variables
self.outputs.update(list_of_variables)
for variable in list_of_variables:
self.add_node(variable, "output")
def net_declaration(self, list_of_variables):
[list_of_variables] = list_of_variables
self.wires.update(list_of_variables)
def list_of_variables(self, identifiers):
return identifiers
# 3. Primitive Instances
# These are merged with module isntantiations
# 4. Module Instantiations
def module_instantiation(self, name_of_module_and_module_instances):
name_of_module = name_of_module_and_module_instances[0]
module_instances = name_of_module_and_module_instances[1:]
# Check if this is a primitive gate
if name_of_module in addable_types:
for name, ports in module_instances:
if isinstance(ports, dict):
raise VerilogParsingError(
"Primitive gates cannot use named port connections",
name,
self.text,
)
self.add_node(ports[0],
name_of_module,
fanin=[p for p in ports[1:]])
# Check if this is a GTECH gate
elif name_of_module.startswith("GTECH_") and name_of_module.split("_")[
-1].rstrip(digits).lower() in addable_types + ["zero", "one"]:
gate = name_of_module.split("_")[-1].rstrip(digits).lower()
if gate == "zero":
gate = "0"
if gate == "one":
gate = "1"
for name, connections in module_instances:
if not isinstance(connections, dict):
raise VerilogParsingError(
"GTECH gates must use named port connections",
name,
self.text,
)
output = connections["Z"]
inputs = set(connections.values()) - {output}
self.add_node(output, gate, fanin=inputs)
# Otherwise, try to parse as blackbox
else:
try:
bb = {i.name: i for i in self.blackboxes}[name_of_module]
except KeyError:
raise VerilogParsingError(
f"Blackbox {name_of_module} not in list of defined blackboxes.",
name_of_module,
self.text,
)
for name, connections in module_instances:
if not isinstance(connections, dict):
raise VerilogParsingError(
"Blackbox instantiations must use named port connections",
name,
self.text,
)
for output in bb.outputs():
if output in connections:
self.add_node(connections[output], "buf")
self.add_blackbox(bb, name, connections)
def module_instance(self,
name_of_instance_and_list_of_module_connecetions):
(
name_of_instance,
list_of_module_connecetions,
) = name_of_instance_and_list_of_module_connecetions
return (name_of_instance, list_of_module_connecetions)
def list_of_module_connections(self, module_port_connections):
if isinstance(module_port_connections[0], dict):
d = dict()
for m in module_port_connections:
d.update(m)
return d
else:
return module_port_connections
def module_port_connection(self, expression):
return expression[0]
def named_port_connection(self, identifier_and_expression):
[identifier, expression] = identifier_and_expression
return {identifier: expression}
# 5. Behavioral Statements
def assignment(self, lvalue_and_expression):
[lvalue, expression] = lvalue_and_expression
if lvalue not in [self.tie0, self.tie1]:
self.add_node(lvalue, "buf", fanin=expression)
# 6. Specify Section
# 7. Expressions
def expression(self, s):
return s[0]
def constant_zero(self, value):
return self.tie0
def constant_one(self, value):
return self.tie1
def not_gate(self, items):
io = "_".join(items)
return self.add_node(f"not_{io}", "not", fanin=items[0], uid=True)
def xor_gate(self, items):
io = "_".join(items)
return self.add_node(f"xor_{io}",
"xor",
fanin=[items[0], items[1]],
uid=True)
def xnor_gate(self, items):
io = "_".join(items)
return self.add_node(f"xnor_{io}",
"xnor",
fanin=[items[0], items[1]],
uid=True)
def and_gate(self, items):
io = "_".join(items)
return self.add_node(f"and_{io}",
"and",
fanin=[items[0], items[1]],
uid=True)
def or_gate(self, items):
io = "_".join(items)
return self.add_node(f"or_{io}",
"or",
fanin=[items[0], items[1]],
uid=True)
def ternary(self, items):
io = "_".join(items)
n = self.add_node(f"mux_n_{io}", "not", fanin=items[0], uid=True)
a0 = self.add_node(f"mux_a0_{io}",
"and",
fanin=[n, items[2]],
uid=True)
a1 = self.add_node(f"mux_a1_{io}",
"and",
fanin=[items[0], items[1]],
uid=True)
return self.add_node(f"mux_o_{io}", "or", fanin=[a0, a1], uid=True)
def sensitivity_transform(c, n):
"""
Creates a circuit to compute sensitivity.
Parameters
----------
c : Circuit
Sequential circuit to unroll.
n : str
Node to compute sensitivity at.
Returns
-------
Circuit
Sensitivity circuit.
"""
# check for blackboxes
if c.blackboxes:
raise ValueError(f"{c.name} contains a blackbox")
# check for startpoints
startpoints = c.startpoints(n)
if len(startpoints) < 1:
raise ValueError(f"{n} has no startpoints")
# get input cone
fi_nodes = c.transitive_fanin(n) | set([n])
sub_c = Circuit(graph=c.graph.subgraph(fi_nodes).copy())
# create sensitivity circuit
sen = Circuit()
sen.add_subcircuit(sub_c, "orig")
for s in startpoints:
sen.add(s, "input", fanout=f"orig_{s}")
# add popcount
sen.add_subcircuit(popcount(len(startpoints)), "pc")
# add inverted input copies
for i, s0 in enumerate(startpoints):
sen.add_subcircuit(sub_c, f"inv_{s0}")
# connect inputs
for s1 in startpoints:
if s0 != s1:
sen.connect(s1, f"inv_{s0}_{s1}")
else:
# connect inverted input
sen.set_type(f"inv_{s0}_{s1}", "not")
sen.connect(s0, f"inv_{s0}_{s1}")
# compare to orig
sen.add(
f"dif_{s0}",
"xor",
fanin=[f"orig_{n}", f"inv_{s0}_{n}"],
fanout=f"pc_in_{i}",
)
sen.add(f"dif_out_{s0}", "output", fanin=f"dif_{s0}")
# instantiate population count
for o in range(clog2(len(startpoints) + 1)):
sen.add(f"sen_out_{o}", "output", fanin=f"pc_out_{o}")
return sen
def banyan(bw):
"""
Create a Banyan switching network
Parameters
----------
bw : int
Input/output width of the network.
Returns
-------
Circuit
Network circuit.
"""
b = Circuit()
# generate switch
m = mux(2)
s = Circuit(name="switch")
s.add_subcircuit(m, f"m0")
s.add_subcircuit(m, f"m1")
s.add("in_0", "buf", fanout=["m0_in_0", "m1_in_1"])
s.add("in_1", "buf", fanout=["m0_in_1", "m1_in_0"])
s.add("out_0", "buf", fanin="m0_out")
s.add("out_1", "buf", fanin="m1_out")
s.add("sel", "input", fanout=["m0_sel_0", "m1_sel_0"])
# generate banyan
I = int(2 * clog2(bw) - 2)
J = int(bw / 2)
# add switches
for i in range(I * J):
b.add_subcircuit(s, f"swb_{i}")
# make connections
swb_ins = [f"swb_{i//2}_in_{i%2}" for i in range(I * J * 2)]
swb_outs = [f"swb_{i//2}_out_{i%2}" for i in range(I * J * 2)]
# connect switches
for i in range(clog2(J)):
r = J / (2**i)
for j in range(J):
t = (j % r) >= (r / 2)
# straight
out_i = int((i * bw) + (2 * j) + t)
in_i = int((i * bw + bw) + (2 * j) + t)
b.connect(swb_outs[out_i], swb_ins[in_i])
# cross
out_i = int((i * bw) + (2 * j) + (1 - t) + ((r - 1) *
((1 - t) * 2 - 1)))
in_i = int((i * bw + bw) + (2 * j) + (1 - t))
b.connect(swb_outs[out_i], swb_ins[in_i])
if r > 2:
# straight
out_i = int(((I * J * 2) - ((2 + i) * bw)) + (2 * j) + t)
in_i = int(((I * J * 2) - ((1 + i) * bw)) + (2 * j) + t)
b.connect(swb_outs[out_i], swb_ins[in_i])
# cross
out_i = int(((I * J * 2) - ((2 + i) * bw)) + (2 * j) +
(1 - t) + ((r - 1) * ((1 - t) * 2 - 1)))
in_i = int(((I * J * 2) - ((1 + i) * bw)) + (2 * j) + (1 - t))
b.connect(swb_outs[out_i], swb_ins[in_i])
# create banyan io
net_ins = swb_ins[:bw]
net_outs = swb_outs[-bw:]
for i, net_in in enumerate(net_ins):
b.add(f"in_{i}", "input", fanout=net_in)
for i, net_out in enumerate(net_outs):
b.add(f"out_{i}", "output", fanin=net_out)
for i in range(I * J):
b.add(f"sel_{i}", "input", fanout=f"swb_{i}_sel")
return b
def miter(c0, c1=None, startpoints=None, endpoints=None):
"""
Creates a miter circuit
Parameters
----------
c0 : Circuit
First circuit.
c1 : Circuit
Optional second circuit, if None c0 is mitered with itself.
startpoints : set of str
Nodes to be tied together, must exist in both circuits.
endpoints : set of str
Nodes to be compared, must exist in both circuits.
Returns
-------
Circuit
Miter circuit.
"""
# check for blackboxes
if c0.blackboxes:
raise ValueError(f"{c0.name} contains a blackbox")
if c1 and c1.blackboxes:
raise ValueError(f"{c1.name} contains a blackbox")
# clean inputs
if not c1:
c1 = c0
if not startpoints:
startpoints = c0.startpoints() & c1.startpoints()
if not endpoints:
endpoints = c0.endpoints() & c1.endpoints()
# create miter, relabel
m = Circuit(name=f"miter_{c0.name}_{c1.name}")
m.add_subcircuit(c0, "c0")
m.add_subcircuit(c1, "c1")
# tie inputs
for n in startpoints:
m.add(n, "input", fanout=[f"c0_{n}", f"c1_{n}"])
# compare outputs
m.add("miter", "or")
m.add("sat", "output", fanin="miter")
for n in endpoints:
m.add(f"dif_{n}", "xor", fanin=[f"c0_{n}", f"c1_{n}"], fanout="miter")
return m
def influence_transform(c, n, s):
"""
Creates a circuit to compute sensitivity.
Parameters
----------
c : Circuit
Sequential circuit to unroll.
n : str
Node to compute influence at.
s : str
Startpoint to compute influence for.
Returns
-------
Circuit
Influence circuit.
"""
# check for blackboxes
if c.blackboxes:
raise ValueError(f"{c.name} contains a blackbox")
# check if s is in startpoints
sp = c.startpoints(n)
if s not in sp:
raise ValueError(f"{s} is not in startpoints of {n}")
# get input cone
fi_nodes = c.transitive_fanin(n) | set([n])
sub_c = Circuit("sub_cone", c.graph.subgraph(fi_nodes).copy())
# create two copies of sub circuit, share inputs except s
infl = Circuit(name=f"infl_{s}_on_{n}")
infl.add_subcircuit(sub_c, "c0")
infl.add_subcircuit(sub_c, "c1")
for g in sp:
if g != s:
infl.add(g, "input", fanout=[f"c0_{g}", f"c1_{g}"])
else:
infl.add(f"not_{g}", "not", fanout=f"c1_{s}")
infl.add(g, "input", fanout=[f"c0_{g}", f"not_{g}"])
infl.add("dif", "xor", fanin=[f"c0_{n}", f"c1_{n}"])
infl.add("sat", "output", fanin="dif")
return infl
def adder(w):
"""
Create an adder.
Parameters
----------
w: the width of the adder.
Returns
-------
a `CircuitGraph` addder.
"""
c = Circuit(name="adder")
carry = c.add("null", "0")
for i in range(w):
# sum
c.add(f"a_{i}", "input")
c.add(f"b_{i}", "input")
c.add(f"out_{i}",
"xor",
fanin=[f"a_{i}", f"b_{i}", carry],
output=True)
# carry
c.add(f"and_ab_{i}", "and", fanin=[f"a_{i}", f"b_{i}"])
c.add(f"and_ac_{i}", "and", fanin=[f"a_{i}", carry])
c.add(f"and_bc_{i}", "and", fanin=[f"b_{i}", carry])
carry = c.add(f"carry_{i}",
"or",
fanin=[
f"and_ab_{i}",
f"and_ac_{i}",
f"and_bc_{i}",
])
c.add(f"out_{w}", "buf", fanin=carry, output=True)
return c
def comb_ff():
lm = Circuit(name="ff")
# mux
m = mux(2).strip_io()
lm.extend(m.relabel({n: f"mux_{n}" for n in m.nodes()}))
# inputs
lm.add("si", "input", fanout="mux_in_0")
lm.add("d", "input", fanout="mux_in_1")
lm.add("clk", "input", fanout="mux_sel_0")
lm.add("r", "input")
lm.add("s", "input")
# logic
lm.add("r_b", "not", fanin="r")
lm.add("qr", "and", fanin=["mux_out", "r_b"])
lm.add("q", "or", fanin=["qr", "s"], output=True)
lm.add("so", "buf", fanin="q", output=True)
return lm
def fast_parse_verilog_netlist(netlist, blackboxes):
"""
A fast version of `parse_verilog_netlist` that can speed up parsing on
very large netlists by making a handful of assumptions. It is much
safer to use `parse_verilog_netlist`. This function should only be used
if necessary.
The input netlist must conform to the following rules:
- Only one module definition is present
- There are no comments
- Assign statements must have a single net as the LHS, and the RHS
must be a constant
- The only constants that may be used are `1'b0` and `1'b1` (or h/d)
- Primitive gates can only have one output
- Instantiations must be named.
- Only one instantation per line (e.g. `buf b1(a, b) b2(c, d);` is
not allowed)
- No expressions (e.g. `buf (a, b & c);` is not allowed)
- No escaped identifiers
The code does not overtly check that these rules are satisfied, and if
they are not this function may still return a malformed Circuit object.
It is up to the caller of the function to assure that these rules are
followed.
If an output is undriven, a driver for the output will still be added to
the circuit, which is a discrepancy with `parse_verilog_netlist` (in which
no output drive will be added).
Note that thorough error checking that is done in `parse_verilog_netlist`
is skipped in this function (e.g. checking if nets are declared as wires,
checking if the portlist matches the input/output declarations, etc.).
Note also that wires that are declared but not used will not be added to
the circuit.
Parameters
----------
netlist: str
Verilog code.
blackboxes: seq of BlackBox
Blackboxes in module.
Returns
-------
Circuit
Parsed circuit.
"""
regex = f"module\s+(.+?)\s*\(.*?\);"
m = re.search(regex, netlist, re.DOTALL)
name = m.group(1)
module = netlist[m.end():]
regex = f"endmodule"
m = re.search(regex, netlist, re.DOTALL)
module = module[:m.start()]
# create graph
g = nx.DiGraph()
# parse io
regex = "(input)\s(.+?);"
inputs = set()
for net_type, net_str in re.findall(regex, module, re.DOTALL):
nets = net_str.split(",")
for net in nets:
inputs.add(net.strip())
g.add_nodes_from(inputs, type="input")
regex = "(output)\s(.+?);"
outputs = set()
for net_type, net_str in re.findall(regex, module, re.DOTALL):
nets = net_str.split(",")
for net in nets:
outputs.add(net.strip())
g.add_nodes_from(outputs, type="output")
# create output drivers, ensure unique names
output_drivers = dict()
for o in outputs:
driver = f"{o}_driver"
while driver in g:
driver = f"{o}_driver_{random.randint(1111, 9999)}"
output_drivers[o] = driver
g.add_nodes_from(output_drivers.values(), type="wire")
g.add_edges_from((v, k) for k, v in output_drivers.items())
# create constants, (will be removed if unused)
tie_0 = "tie0"
while tie_0 in g:
tie_0 = "tie0_{random.randint(1111, 9999)}"
tie_1 = "tie1"
while tie_1 in g:
tie_1 = "tie1_{random.randint(1111, 9999)}"
g.add_node(tie_0, type="0")
g.add_node(tie_1, type="1")
# parse insts
regex = "([a-zA-Z][a-zA-Z\d_]*)\s+([a-zA-Z][a-zA-Z\d_]*)\s*\(([^;]+)\);"
all_nets = defaultdict(list)
all_edges = list()
blackboxes_to_add = dict()
for gate, inst, net_str in re.findall(regex, module, re.DOTALL):
# parse generics
if gate in addable_types:
# parse nets
nets = [n.strip() for n in net_str.split(",")]
# check for outputs, replace constants
nets = [
output_drivers[n] if n in output_drivers else
tie_0 if n == "1'b0" else tie_1 if n == "1'b1" else n
for n in nets
]
all_nets[gate].append(nets[0])
all_edges += [(i, nets[0]) for i in nets[1:]]
# parse non-generics
else:
# get blackbox definition
try:
bb = next(bb for bb in blackboxes if bb.name == gate)
except:
raise ValueError(f"blackbox {gate} not defined")
# parse pins
all_nets["bb_input"] += [f"{inst}.{n}" for n in bb.inputs()]
all_nets["bb_output"] += [f"{inst}.{n}" for n in bb.outputs()]
regex = "\.\s*(\S+)\s*\(\s*(\S+)\s*\)"
connections = {}
for pin, net in re.findall(regex, net_str):
# check for outputs
if net in output_drivers:
net = output_drivers[net]
elif net == "1'b1":
net = tie_1
elif net == "1'b0":
net = tie_0
if pin in bb.inputs():
all_edges.append((net, f"{inst}.{pin}"))
elif pin in bb.outputs():
# add intermediate net for outputs
all_nets["buf"].append(net)
all_edges.append((f"{inst}.{pin}", net))
else:
raise ValueError(
f"node {pin} not defined for blackbox {gate}")
blackboxes_to_add[inst] = bb
regex = "assign\s+([a-zA-Z][a-zA-Z\d_]*)\s*=\s*([a-zA-Z\d][a-zA-Z\d_']*)\s*;"
for n0, n1 in re.findall(regex, module):
if n0 in output_drivers:
n0 = output_drivers[n0]
if n1 in output_drivers:
n1 = output_drivers[n1]
all_nets["buf"].append(n0)
if n1 in ["1'b0", "1'h0", "1'd0"]:
all_edges.append((tie_0, n0))
elif n1 in ["1'b1", "1'h1", "1'd1"]:
all_edges.append((tie_1, n0))
else:
all_edges.append((n1, n0))
for k, v in all_nets.items():
g.add_nodes_from(v, type=k)
g.add_edges_from(all_edges)
try:
next(g.successors(tie_0))
except StopIteration:
g.remove_node(tie_0)
try:
next(g.successors(tie_1))
except StopIteration:
g.remove_node(tie_1)
return Circuit(name=name, graph=g, blackboxes=blackboxes_to_add)
def popcount(w):
"""
Create a population count circuit.
Parameters
----------
w: the width of the adder.
Returns
-------
a `CircuitGraph` addder.
"""
c = Circuit(name="popcount")
ps = [[c.add(f"in_{i}", "input")] for i in range(w)]
i = 0
while len(ps) > 1:
# get values
ns = ps.pop(0)
ms = ps.pop(0)
# pad
aw = max(len(ns), len(ms))
while len(ms) < aw:
ms += ["null"]
while len(ns) < aw:
ns += ["null"]
# instantiate and connect adder
a = adder(aw).strip_io()
c.extend(a.relabel({n: f"add_{i}_{n}" for n in a.nodes()}))
for j, (n, m) in enumerate(zip(ns, ms)):
c.connect(n, f"add_{i}_a_{j}")
c.connect(m, f"add_{i}_b_{j}")
# add adder outputs
ps.append([f"add_{i}_out_{j}" for j in range(aw + 1)])
i += 1
# connect outputs
for i, o in enumerate(ps[0]):
c.add(f"out_{i}", "buf", fanin=o, output=True)
if "null" in c:
c.set_type("null", "0")
c.set_output("null", False)
return c
def verilog_to_circuit(verilog, name, seq_types=None):
"""
Creates a new Circuit from a verilog file.
Parameters
----------
path: str
verilog code.
name: str
the module name.
seq_types: list of dicts of str:str
the sequential element types.
Returns
-------
Circuit
the parsed circuit.
"""
if seq_types is None:
seq_types = default_seq_types
c = Circuit(name=name)
with tempfile.TemporaryDirectory(prefix="circuitgraph") as d:
codeparser = VerilogParser(outputdir=d, debug=False)
ast = codeparser.parse(verilog, debug=False)
description = ast.children()[0]
module_def = [d for d in description.children() if d.name == name]
if not module_def:
raise ValueError(f"Module {name} not found")
module_def = module_def[0]
outputs = set()
widths = dict()
for child in module_def.children():
if type(child) == ast_types.Paramlist:
if child.children():
raise ValueError(
f"circuitgraph cannot parse parameters (line {child.lineno})"
)
# Parse portlist
elif type(child) == ast_types.Portlist:
for cip in [
i for i in child.children()
if type(i) == ast_types.Ioport
]:
for ci in cip.children():
parse_io(c, ci, outputs)
# Parse declarations
elif type(child) == ast_types.Decl:
if ast_types.Parameter in [type(i) for i in child.children()]:
raise ValueError(
f"circuitgraph cannot parse parameters (line {child.lineno})"
)
for ci in [
i for i in child.children()
if type(i) in [ast_types.Input, ast_types.Output]
]:
parse_io(c, ci, outputs)
# Parse instances
elif type(child) == ast_types.InstanceList:
for instance in child.instances:
if instance.module in [
"buf",
"not",
"and",
"nand",
"or",
"nor",
"xor",
"xnor",
]:
gate = instance.module
dest = parse_argument(instance.portlist[0].argname, c)
sources = [
parse_argument(i.argname, c)
for i in instance.portlist[1:]
]
c.add(dest,
gate,
fanin=sources,
output=dest in outputs)
elif instance.module in [i.name for i in seq_types]:
if instance.portlist[0].portname is None:
raise ValueError("circuitgraph can only parse "
"sequential instances declared "
"with port argument notation "
f"(line {instance.lineno})")
seq_type = [
i for i in seq_types if i.name == instance.module
][0]
ports = {
p.portname: parse_argument(p.argname, c)
for p in instance.portlist
}
c.add(
ports.get(seq_type.io.get("q")),
seq_type.seq_type,
fanin=ports.get(seq_type.io.get("d")),
clk=ports.get(seq_type.io.get("clk")),
r=ports.get(seq_type.io.get("r")),
s=ports.get(seq_type.io.get("s")),
output=ports.get(seq_type.io.get("q")) in outputs,
)
else:
raise ValueError(
"circuitgraph cannot parse instance of "
f"type {instance.module} (line "
f"{instance.lineno})")
# Parse assigns
elif type(child) == ast_types.Assign:
dest = child.left.var
dest = parse_argument(dest, c)
if type(child.right.var) == ast_types.IntConst:
c.add(
dest,
f"{child.right.var.value[-1]}",
output=dest in outputs,
)
elif issubclass(type(child.right.var), ast_types.Operator):
parse_operator(child.right.var, c, outputs, dest=dest)
elif issubclass(type(child.right.var), ast_types.Concat):
raise ValueError(
"circuitgraph cannot parse concatenations "
f"(line {child.right.var.lineno})")
else:
raise ValueError(
"circuitgraph cannot parse statements of type "
f"{type(child)} (line {child.lineno})")
return c
def bench_to_circuit(netlist, name):
"""
Creates a new Circuit from a netlist string.
Parameters
----------
netlist: str
netlist code.
name: str
the module name.
Returns
-------
Circuit
the parsed circuit.
"""
# create circuit
c = Circuit(name=name)
# get inputs
in_regex = r"(?:INPUT|input)\s*\(\s*([a-zA-Z][a-zA-Z\d_]*)\s*\)"
for net_str in re.findall(in_regex, netlist, re.DOTALL):
nets = net_str.replace(" ", "").replace("\n",
"").replace("\t",
"").split(",")
for n in nets:
c.add(n, "input")
# handle gates
regex = r"([a-zA-Z][a-zA-Z\d_]*)\s*=\s*(BUF|NOT|OR|NOR|AND|NAND|XOR|XNOR|buf|not|or|nor|and|nand|not|xor|xnor)\(([^\)]+)\)"
for net, gate, input_str in re.findall(regex, netlist):
# parse all nets
inputs = (input_str.replace(" ",
"").replace("\n",
"").replace("\t",
"").split(","))
c.add(net, gate.lower(), fanin=inputs)
# get outputs
in_regex = r"(?:OUTPUT|output)\s*\(\s*([a-zA-Z][a-zA-Z\d_]*)\s*\)"
for net_str in re.findall(in_regex, netlist, re.DOTALL):
nets = net_str.replace(" ", "").replace("\n",
"").replace("\t",
"").split(",")
for n in nets:
driver = c.uid(f"{n}_driver")
c.relabel({n: driver})
c.add(n, "output", fanin=driver)
return c
def popcount(w):
"""
Create a population count circuit.
Parameters
----------
w : int
Input width of the circuit.
Returns
-------
Circuit
Population count circuit.
"""
c = Circuit(name="popcount")
ps = [[c.add(f"in_{i}", "input")] for i in range(w)]
c.add("tie0", "0")
i = 0
while len(ps) > 1:
# get values
ns = ps.pop(0)
ms = ps.pop(0)
# pad
aw = max(len(ns), len(ms))
while len(ms) < aw:
ms += ["tie0"]
while len(ns) < aw:
ns += ["tie0"]
# instantiate and connect adder
c.add_subcircuit(adder(aw), f"add_{i}")
for j, (n, m) in enumerate(zip(ns, ms)):
c.connect(n, f"add_{i}_a_{j}")
c.connect(m, f"add_{i}_b_{j}")
# add adder outputs
ps.append([f"add_{i}_out_{j}" for j in range(aw + 1)])
i += 1
# connect outputs
for i, o in enumerate(ps[0]):
c.add(f"out_{i}", "output", fanin=o)
if not c.fanout("tie0"):
c.remove("tie0")
return c
def adder(w):
"""
Create an adder.
Parameters
----------
w : int
Input width of adder.
Returns
-------
Circuit
Adder circuit.
"""
c = Circuit(name="adder")
carry = c.add("null", "0")
for i in range(w):
# sum
c.add(f"a_{i}", "input")
c.add(f"b_{i}", "input")
c.add(f"sum_{i}", "xor", fanin=[f"a_{i}", f"b_{i}", carry])
c.add(f"out_{i}", "output", fanin=f"sum_{i}")
# carry
c.add(f"and_ab_{i}", "and", fanin=[f"a_{i}", f"b_{i}"])
c.add(f"and_ac_{i}", "and", fanin=[f"a_{i}", carry])
c.add(f"and_bc_{i}", "and", fanin=[f"b_{i}", carry])
carry = c.add(
f"carry_{i}",
"or",
fanin=[f"and_ab_{i}", f"and_ac_{i}", f"and_bc_{i}"],
)
c.add(f"out_{w}", "output", fanin=carry)
return c
def mux(w):
"""
Create a mux.
Parameters
----------
w : int
Input width of the mux.
Returns
-------
Circuit
Mux circuit.
"""
c = Circuit(name="mux")
# create inputs
for i in range(w):
c.add(f"in_{i}", "input")
sels = []
for i in range(clog2(w)):
c.add(f"sel_{i}", "input")
c.add(f"not_sel_{i}", "not", fanin=f"sel_{i}")
sels.append([f"not_sel_{i}", f"sel_{i}"])
# create output or
c.add("or", "or")
c.add("out", "output", fanin="or")
i = 0
for sel in product(*sels[::-1]):
c.add(f"and_{i}", "and", fanin=[*sel, f"in_{i}"], fanout="or")
i += 1
if i == w:
break
return c
