def initTopology(self, topo):
# Define the controller
self.controller = PySwitchController(version="pyswitch")
self.of_context.setController(self.controller)
# Define the switches
sw1 = OpenflowSwitchReal(name="s1", port_count=2, of_id=1, expire_entries=config.get("model.flow_entry_expiration"))
# Define the clients and thier addresses
mac1 = (0x00, 0x00, 0x00, 0x00, 0x01, 0x00)
mac2 = (0x00, 0x00, 0x00, 0x00, 0x01, 0x01)
cl1 = Arrival(name="h1", mymac=mac1, dstmac=mac2, \
pkts=config.get("pyswitch_model.pkts"), sequential=config.get("pyswitch_model.sequential"))
cl2 = Replier(name="h2", mymac=mac2)
# We want host mobility active on client 2
cl2.move_host = config.get("pyswitch_model.move_host")
#cl2.move_host_switch = (sw1, 1, 2)
# topology connections: sw1 port 0 is connected to port 0 of cl1, port 1 connected to port 0 of sw2
sw1.initTopology({0: (cl1, 0), 1: (cl2, 0)})
cl1.initTopology({0: (sw1, 0)})
cl2.initTopology({0: (sw1, 1)})
# Add clients and switches to the model list
self.clients.append(cl1)
self.clients.append(cl2)
self.switches.append(sw1)
self.switches_idx[sw1.getOpenflowID()] = sw1
# start callbacks
self.controller.start_callbacks.append(lambda: self.controller.install())
self.controller.start_callbacks.append(lambda: self.controller.addSwitch(sw1))
sw1.setRealSwitch(HpSwitch, "128.178.149.155", "eth0", {0 : 3, 1 : 4}, 0, ["eth1", "eth2"])
sw1.setRealSwitch(OpenFlowUserSwitch, "127.0.0.1", "lo", {0 : 1, 1 : 2})
sw1.setRealSwitch(OVSSwitch, "127.0.0.1", "lo", {0 : 1, 1 : 2})
def initTopology(self, topo):
""" 3 switch triangle topology """
self.controller = PySwitchController(version="pyswitch")
sw1 = OpenflowSwitch(name="s1", port_count=3, of_id=1)
sw2 = OpenflowSwitch(name="s2", port_count=3, of_id=2)
sw3 = OpenflowSwitch(name="s3", port_count=2, of_id=3)
cl1 = Arrival(name="h1", pkts=config.get("pyswitch_model.pkts"), sequential=config.get("pyswitch_model.sequential"))
cl2 = Replier(name="h2", mymac=(0x00, 0x01, 0x02, 0x03, 0x04, 0x05))
sw1.initTopology({0: (cl1, 0), 1: (sw2, 0), 2: (sw3, 0)})
sw2.initTopology({0: (sw1, 1), 1: (cl2, 0), 2: (sw3, 1)})
sw3.initTopology({0: (sw1, 2), 1: (sw2, 2)})
cl1.initTopology({0: (sw1, 0)})
cl2.initTopology({0: (sw2, 1)})
self.clients.append(cl1)
self.clients.append(cl2)
self.switches.append(sw1)
self.switches.append(sw2)
self.switches.append(sw3)
self.switches_idx[sw1.getOpenflowID()] = sw1
self.switches_idx[sw2.getOpenflowID()] = sw2
self.switches_idx[sw3.getOpenflowID()] = sw3
# start callbacks
self.controller.start_callbacks.append(lambda: self.controller.install())
self.controller.start_callbacks.append(lambda: self.controller.addSwitch(sw1))
self.controller.start_callbacks.append(lambda: self.controller.addSwitch(sw2))
self.controller.start_callbacks.append(lambda: self.controller.addSwitch(sw3))
def initTopology(self, topo):
""" 3 switch triangle topology """
self.controller = PySwitchController(version="pyswitch")
sw1 = OpenflowSwitch(name="s1", port_count=3, of_id=1)
sw2 = OpenflowSwitch(name="s2", port_count=3, of_id=2)
sw3 = OpenflowSwitch(name="s3", port_count=2, of_id=3)
cl1 = Arrival(name="h1",
pkts=config.get("pyswitch_model.pkts"),
sequential=config.get("pyswitch_model.sequential"))
cl2 = Replier(name="h2", mymac=(0x00, 0x01, 0x02, 0x03, 0x04, 0x05))
sw1.initTopology({0: (cl1, 0), 1: (sw2, 0), 2: (sw3, 0)})
sw2.initTopology({0: (sw1, 1), 1: (cl2, 0), 2: (sw3, 1)})
sw3.initTopology({0: (sw1, 2), 1: (sw2, 2)})
cl1.initTopology({0: (sw1, 0)})
cl2.initTopology({0: (sw2, 1)})
self.clients.append(cl1)
self.clients.append(cl2)
self.switches.append(sw1)
self.switches.append(sw2)
self.switches.append(sw3)
self.switches_idx[sw1.getOpenflowID()] = sw1
self.switches_idx[sw2.getOpenflowID()] = sw2
self.switches_idx[sw3.getOpenflowID()] = sw3
# start callbacks
self.controller.start_callbacks.append(
lambda: self.controller.install())
self.controller.start_callbacks.append(
lambda: self.controller.addSwitch(sw1))
self.controller.start_callbacks.append(
lambda: self.controller.addSwitch(sw2))
self.controller.start_callbacks.append(
lambda: self.controller.addSwitch(sw3))
def initTopology(self, topo):
self.controller = PySwitchController()
sw1 = OpenflowSwitch(
name="s1",
port_count=2,
of_id=1,
expire_entries=config.get("model.flow_entry_expiration"))
sw2 = OpenflowSwitch(
name="s2",
port_count=2,
of_id=2,
expire_entries=config.get("model.flow_entry_expiration"))
cl1 = SymExecSender(name="h1",
mymac=(0x00, 0xBA, 0xAD, 0xF0, 0x0D, 0x01),
max_pkts=config.get("nice_model.max_pkts"),
max_burst=config.get("nice_model.max_burst"))
cl2 = Replier(name="h2", mymac=(0x00, 0x01, 0x02, 0x03, 0x04, 0x05))
sw1.initTopology({0: (cl1, 0), 1: (sw2, 0)})
sw2.initTopology({0: (sw1, 1), 1: (cl2, 0)})
cl1.initTopology({0: (sw1, 0)})
cl2.initTopology({0: (sw2, 1)})
self.clients.append(cl1)
self.clients.append(cl2)
self.switches.append(sw1)
self.switches.append(sw2)
self.switches_idx[sw1.getOpenflowID()] = sw1
self.switches_idx[sw2.getOpenflowID()] = sw2
# start callbacks
self.controller.start_callbacks.append(
lambda: self.controller.install())
self.controller.start_callbacks.append(
lambda: self.controller.addSwitch(sw1))
self.controller.start_callbacks.append(
lambda: self.controller.addSwitch(sw2))
def initTopology(self, topo):
self.controller = None
cl1 = Arrival(name="h1", pkts=config.get("twohosts_model.pkts"))
cl2 = Replier(name="h2", mymac=(0x00, 0x01, 0x02, 0x03, 0x04, 0x05))
cl1.initTopology({0: (cl2, 0)})
cl2.initTopology({0: (cl1, 0)})
self.clients.append(cl1)
self.clients.append(cl2)
def initTopology(self, topo):
self.controller = None
cl1 = Arrival(name="h1", pkts=config.get("twohosts_model.pkts"))
cl2 = Replier(name="h2", mymac=(0x00, 0x01, 0x02, 0x03, 0x04, 0x05))
cl1.initTopology({0: (cl2, 0)})
cl2.initTopology({0: (cl1, 0)})
self.clients.append(cl1)
self.clients.append(cl2)
def initTopology(self, topo):
self.controller = PySwitchController()
sw1 = OpenflowSwitch(name="s1", port_count=2, of_id=1, expire_entries=config.get("model.flow_entry_expiration"))
sw2 = OpenflowSwitch(name="s2", port_count=2, of_id=2, expire_entries=config.get("model.flow_entry_expiration"))
cl1 = SymExecSender(name="h1", mymac=(0x00, 0xBA, 0xAD, 0xF0, 0x0D, 0x01), max_pkts=config.get("nice_model.max_pkts"), max_burst=config.get("nice_model.max_burst"))
cl2 = Replier(name="h2", mymac=(0x00, 0x01, 0x02, 0x03, 0x04, 0x05))
sw1.initTopology({0: (cl1, 0), 1: (sw2, 0)})
sw2.initTopology({0: (sw1, 1), 1: (cl2, 0)})
cl1.initTopology({0: (sw1, 0)})
cl2.initTopology({0: (sw2, 1)})
self.clients.append(cl1)
self.clients.append(cl2)
self.switches.append(sw1)
self.switches.append(sw2)
self.switches_idx[sw1.getOpenflowID()] = sw1
self.switches_idx[sw2.getOpenflowID()] = sw2
# start callbacks
self.controller.start_callbacks.append(lambda: self.controller.install())
self.controller.start_callbacks.append(lambda: self.controller.addSwitch(sw1))
self.controller.start_callbacks.append(lambda: self.controller.addSwitch(sw2))
def initTopology(self, topo):
# Define the controller
self.controller = PySwitchController(version="pyswitch")
self.of_context.setController(self.controller)
# Define the switches
sw1 = OpenflowSwitchReal(
name="s1",
port_count=2,
of_id=1,
expire_entries=config.get("model.flow_entry_expiration"))
# Define the clients and thier addresses
mac1 = (0x00, 0x00, 0x00, 0x00, 0x01, 0x00)
mac2 = (0x00, 0x00, 0x00, 0x00, 0x01, 0x01)
cl1 = Arrival(name="h1", mymac=mac1, dstmac=mac2, \
pkts=config.get("pyswitch_model.pkts"), sequential=config.get("pyswitch_model.sequential"))
cl2 = Replier(name="h2", mymac=mac2)
# We want host mobility active on client 2
cl2.move_host = config.get("pyswitch_model.move_host")
#cl2.move_host_switch = (sw1, 1, 2)
# topology connections: sw1 port 0 is connected to port 0 of cl1, port 1 connected to port 0 of sw2
sw1.initTopology({0: (cl1, 0), 1: (cl2, 0)})
cl1.initTopology({0: (sw1, 0)})
cl2.initTopology({0: (sw1, 1)})
# Add clients and switches to the model list
self.clients.append(cl1)
self.clients.append(cl2)
self.switches.append(sw1)
self.switches_idx[sw1.getOpenflowID()] = sw1
# start callbacks
self.controller.start_callbacks.append(
lambda: self.controller.install())
self.controller.start_callbacks.append(
lambda: self.controller.addSwitch(sw1))
sw1.setRealSwitch(HpSwitch, "128.178.149.155", "eth0", {
0: 3,
1: 4
}, 0, ["eth1", "eth2"])
sw1.setRealSwitch(OpenFlowUserSwitch, "127.0.0.1", "lo", {0: 1, 1: 2})
sw1.setRealSwitch(OVSSwitch, "127.0.0.1", "lo", {0: 1, 1: 2})
def initTopology(self, topo):
# Define the controller
self.controller = PySwitchController(version="pyswitch")
# Define the switches
sw1 = OpenflowSwitch(name="s1", port_count=2, of_id=1, expire_entries=config.get("model.flow_entry_expiration"))
sw2 = OpenflowSwitch(name="s2", port_count=3, of_id=2, expire_entries=config.get("model.flow_entry_expiration"))
# Define the clients and thier addresses
mac1 = (0x00, 0x01, 0x02, 0x03, 0x04, 0x00)
mac2 = (0x00, 0x01, 0x02, 0x03, 0x05, 0x05)
cl1 = Arrival(name="h1", mymac=mac1, dstmac=mac2, \
pkts=config.get("pyswitch_model.pkts"), sequential=config.get("pyswitch_model.sequential"))
cl2 = Replier(name="h2", mymac=mac2)
# We want host mobility active on client 2
cl2.move_host = config.get("pyswitch_model.move_host")
cl2.move_host_switch = (sw2, 1, 2)
if cl2.move_host:
self.invariants = [NoDropMobileInvariant]
else:
self.invariants = [NoLoopInvariant, StrictDirectRouteInvariant]
# topology connections: sw1 port 0 is connected to port 0 of cl1, port 1 connected to port 0 of sw2
sw1.initTopology({0: (cl1, 0), 1: (sw2, 0)})
sw2.initTopology({0: (sw1, 1), 1: (cl2, 0), 2: (None, None)})
cl1.initTopology({0: (sw1, 0)})
cl2.initTopology({0: (sw2, 1)})
# Add clients and switches to the model list
self.clients.append(cl1)
self.clients.append(cl2)
self.switches.append(sw1)
self.switches.append(sw2)
self.switches_idx[sw1.getOpenflowID()] = sw1
self.switches_idx[sw2.getOpenflowID()] = sw2
# start callbacks
self.controller.start_callbacks.append(lambda: self.controller.install())
self.controller.start_callbacks.append(lambda: self.controller.addSwitch(sw1))
self.controller.start_callbacks.append(lambda: self.controller.addSwitch(sw2))
def initTopology(self, topo):
self.controller = PySwitchController(version="pyswitch")
sw1 = OpenflowSwitch(name="s1", port_count=2, of_id=1, expire_entries=config.get("model.flow_entry_expiration"))
sw2 = OpenflowSwitch(name="s2", port_count=2, of_id=2, expire_entries=config.get("model.flow_entry_expiration"))
mac1 = (0x00, 0x01, 0x02, 0x03, 0x04, 0x00)
mac2 = (0x00, 0x01, 0x02, 0x03, 0x05, 0x05)
cl1 = Arrival(name="h1", mymac=mac1, dstmac=mac2, \
pkts=config.get("pyswitch_model.pkts"), sequential=config.get("pyswitch_model.sequential"))
cl2 = Replier(name="h2", mymac=mac2)
sw1.initTopology({0: (cl1, 0), 1: (sw2, 0)})
sw2.initTopology({0: (sw1, 1), 1: (cl2, 0)})
cl1.initTopology({0: (sw1, 0)})
cl2.initTopology({0: (sw2, 1)})
self.clients.append(cl1)
self.clients.append(cl2)
self.switches.append(sw1)
self.switches.append(sw2)
self.switches_idx[sw1.getOpenflowID()] = sw1
self.switches_idx[sw2.getOpenflowID()] = sw2
# start callbacks
self.controller.start_callbacks.append(lambda: self.controller.install())
self.controller.start_callbacks.append(lambda: self.controller.addSwitch(sw1))
self.controller.start_callbacks.append(lambda: self.controller.addSwitch(sw2))