def __init__(self):
super().__init__()
# Properties
self.title = "Sequence Manager"
# Layout
self.resize(640, 480)
self._sequence_tree = ui.Tree(header=("Name", "Filename"),
indentation=0,
selected=self.on_sequence_tree_selected)
self._add_button = ui.Button(text="&Add", clicked=self.on_add_sequence)
self._remove_button = ui.Button(text="&Remove",
enabled=False,
clicked=self.on_remove_sequence)
self._preview_tree = ui.Tree(header=["Key", "Value"])
self.layout = ui.Column(ui.Row(ui.Column(self._sequence_tree,
self._preview_tree,
stretch=(4, 3)),
ui.Column(self._add_button,
self._remove_button,
ui.Spacer()),
stretch=(1, 0)),
ui.DialogButtonBox(buttons=("ok", "cancel"),
accepted=self.accept,
rejected=self.reject),
stretch=(1, 0))
def __init__(self, *args, **kwargs):
super().__init__(*args, **kwargs)
self.title = "IV Ramp"
self.register_vsource()
self.register_environment()
self.plot = ui.Plot(height=300, legend="right")
self.plot.add_axis("x", align="bottom", text="Voltage [V] (abs)")
self.plot.add_axis("y", align="right", text="Current [uA]")
self.plot.add_series("hvsrc", "x", "y", text="HV Source", color="red")
self.plot.add_series("xfit", "x", "y", text="Fit", color="magenta")
self.data_tabs.insert(0, ui.Tab(title="IV Curve", layout=self.plot))
self.voltage_start = ui.Number(decimals=3, suffix="V")
self.voltage_stop = ui.Number(decimals=3, suffix="V")
self.voltage_step = ui.Number(minimum=0, maximum=200, decimals=3, suffix="V")
self.waiting_time = ui.Number(minimum=0, decimals=2, suffix="s")
self.hvsrc_current_compliance = ui.Metric(minimum=0, decimals=3, prefixes='mun', unit="A")
self.bind("voltage_start", self.voltage_start, 0, unit="V")
self.bind("voltage_stop", self.voltage_stop, 100, unit="V")
self.bind("voltage_step", self.voltage_step, 1, unit="V")
self.bind("waiting_time", self.waiting_time, 1, unit="s")
self.bind("hvsrc_current_compliance", self.hvsrc_current_compliance, 0, unit="A")
self.general_tab.layout = ui.Row(
ui.GroupBox(
title="Ramp",
layout=ui.Column(
ui.Label(text="Start"),
self.voltage_start,
ui.Label(text="Stop"),
self.voltage_stop,
ui.Label(text="Step"),
self.voltage_step,
ui.Label(text="Waiting Time"),
self.waiting_time,
ui.Spacer()
)
),
ui.GroupBox(
title="HV Source",
layout=ui.Column(
ui.Label(text="Compliance"),
self.hvsrc_current_compliance,
ui.Spacer()
)
),
ui.Spacer(),
stretch=(1, 1, 1)
)
ampere = comet.ureg('A')
volt = comet.ureg('V')
self.series_transform['hvsrc'] = lambda x, y: ((x * volt).to('V').m, (y * ampere).to('uA').m)
self.series_transform['xfit'] = self.series_transform.get('hvsrc')
def __init__(self):
super().__init__(title="Webserver")
self._enabled_checkbox = ui.CheckBox(
text="Enable Server"
)
self._host_text = ui.Text()
self._port_number = ui.Number(
minimum=0,
maximum=99999,
step=1
)
self.layout = ui.Column(
ui.GroupBox(
title="JSON API",
layout=ui.Column(
self._enabled_checkbox,
ui.Row(
ui.Column(
ui.Label("Host"),
ui.Label("Port"),
),
ui.Column(
self._host_text,
self._port_number,
),
ui.Spacer()
),
ui.Spacer(),
stretch=(0, 0, 1)
)
),
ui.Spacer(),
stretch=(0, 1)
)
def __init__(self, *args, **kwargs):
super().__init__(*args, **kwargs)
self._bindings = {}
self.state_handlers = []
self.data_panel = ui.Column()
self.general_tab = ui.Tab(title="General", layout=ui.Row())
self.control_tabs = ui.Tabs(self.general_tab)
self.status_panel = ui.Column()
self.control_panel = ui.Row(self.control_tabs,
ui.Column(self.status_panel,
ui.Spacer(horizontal=False)),
stretch=(3, 1))
self.layout.insert(2, self.data_panel)
self.layout.insert(3, self.control_panel)
self.layout.stretch = 0, 0, 0, 0, 1
self.measurement = None
self.data_tabs = ui.Tabs()
self.data_panel.append(self.data_tabs)
# Add analysis tab
self.analysis_tree = ui.Tree(header=["Parameter", "Value"])
self.data_tabs.insert(
0, ui.Tab(title="Analysis", layout=self.analysis_tree))
# Plots
self.series_transform = {}
self.series_transform_default = lambda x, y: (x, y)
def __init__(self, *args, **kwargs):
super().__init__(*args, **kwargs)
self.matrix_enable = ui.CheckBox(text="Enable Switching")
self.matrix_channels = MatrixChannelsText(
tool_tip="Matrix card switching channels, comma separated list."
)
self.bind("matrix_enable", self.matrix_enable, False)
self.bind("matrix_channels", self.matrix_channels, [])
self.control_tabs.append(ui.Tab(
title="Matrix",
layout=ui.Column(
ui.GroupBox(
title="Matrix",
layout=ui.Column(
self.matrix_enable,
ui.Label(text="Channels"),
ui.Row(
self.matrix_channels,
# ui.Button(text="Load from Matrix", clicked=self.load_matrix_channels)
)
)
),
ui.Spacer(),
stretch=(0, 1)
)
))
def __init__(self, sample_changed=None, **kwargs):
super().__init__(**kwargs)
# Properties
self.title = "Sample"
# Callbacks
self.sample_changed = sample_changed
# Layout
self._sample_name_prefix_text = ui.Text(
tool_tip="Sample name prefix",
clearable=True,
editing_finished=self.on_sample_name_edited)
self._sample_name_infix_text = ui.Text(
tool_tip="Sample name",
clearable=True,
editing_finished=self.on_sample_name_edited)
self._sample_name_suffix_text = ui.Text(
tool_tip="Sample name suffix",
clearable=True,
editing_finished=self.on_sample_name_edited)
self._sample_type_text = ui.Text(
tool_tip="Sample type",
clearable=True,
editing_finished=self.on_sample_name_edited)
self._sample_position_text = ui.Text(
tool_tip="Sample position on the chuck",
clearable=True,
editing_finished=self.on_sample_position_edited)
self._sequence_text = ui.Text(readonly=True)
self._sample_comment_text = ui.Text(
tool_tip="Sample comment (optional)",
clearable=True,
editing_finished=self.on_sample_comment_edited)
self._reload_button = ui.ToolButton(
icon=make_path('assets', 'icons', 'reload.svg'),
tool_tip="Reload sequence configuration from file.",
clicked=self.on_reload_clicked)
self._sequence_manager_button = ui.ToolButton(
icon=make_path('assets', 'icons', 'gear.svg'),
tool_tip="Open sequence manager",
clicked=self.on_sequence_manager_clicked)
self._sample_groupbox = ui.GroupBox(
title="Sample",
layout=ui.Row(ui.Column(ui.Label("Name"), ui.Label("Type"),
ui.Label("Position"), ui.Label("Comment"),
ui.Label("Sequence")),
ui.Column(
ui.Row(self._sample_name_prefix_text,
self._sample_name_infix_text,
self._sample_name_suffix_text,
stretch=(3, 7, 3)),
self._sample_type_text,
self._sample_position_text,
self._sample_comment_text,
ui.Row(self._sequence_text,
self._reload_button,
self._sequence_manager_button,
stretch=(1, 0))),
stretch=(0, 1)))
self.layout.insert(2, self._sample_groupbox)
def __init__(self):
super().__init__(title="Options")
self._png_plots_checkbox = ui.CheckBox("Save plots as PNG")
self._points_in_plots_checkbox = ui.CheckBox("Show points in plots")
self._png_analysis_checkbox = ui.CheckBox(
"Add analysis preview to PNG")
self._export_json_checkbox = ui.CheckBox("Write JSON data (*.json)")
self._export_txt_checkbox = ui.CheckBox(
"Write plain text data (*.txt)")
self._write_logfiles_checkbox = ui.CheckBox(
"Write measurement log files (*.log)")
self._vsrc_instrument_combobox = ui.ComboBox(
["K2410", "K2470", "K2657A"])
self._hvsrc_instrument_combobox = ui.ComboBox(
["K2410", "K2470", "K2657A"])
self._retry_measurement_number = ui.Number(
minimum=0,
suffix="x",
tool_tip="Number of retries for measurements with failed analysis."
)
self._retry_contact_number = ui.Number(
minimum=0,
suffix="x",
tool_tip=
"Number of re-contact retries for measurements with failed analysis."
)
self.layout = ui.Column(
ui.Row(ui.GroupBox(title="Plots",
layout=ui.Column(
self._png_plots_checkbox,
self._points_in_plots_checkbox,
)),
ui.GroupBox(title="Analysis",
layout=ui.Column(self._png_analysis_checkbox,
ui.Spacer())),
stretch=(0, 1)),
ui.Row(ui.GroupBox(title="Formats",
layout=ui.Column(self._export_json_checkbox,
self._export_txt_checkbox)),
ui.GroupBox(title="Log files",
layout=ui.Column(self._write_logfiles_checkbox,
ui.Spacer())),
stretch=(0, 1)),
ui.GroupBox(title="Instruments",
layout=ui.Row(ui.Column(ui.Label("V Source"),
ui.Label("HV Source")),
ui.Column(
self._vsrc_instrument_combobox,
self._hvsrc_instrument_combobox),
ui.Spacer(vertical=False),
stretch=(0, 0, 1))),
ui.GroupBox(title="Auto Retry",
layout=ui.Row(
ui.Column(ui.Label("Retry Measurements"),
ui.Label("Retry Contact")),
ui.Column(self._retry_measurement_number,
self._retry_contact_number),
ui.Spacer())),
ui.Spacer(),
stretch=(0, 0, 0, 0, 1))
def __init__(self, reload=None):
super().__init__(title="Status")
self.reload = reload
self.matrix_model_text = ui.Text(readonly=True)
self.matrix_channels_text = ui.Text(readonly=True)
self.hvsrc_model_text = ui.Text(readonly=True)
self.vsrc_model_text = ui.Text(readonly=True)
self.lcr_model_text = ui.Text(readonly=True)
self.elm_model_text = ui.Text(readonly=True)
self.table_model_text = ui.Text(readonly=True)
self.table_state_text = ui.Text(readonly=True)
self.env_model_text = ui.Text(readonly=True)
self.reload_status_button = ui.Button("&Reload",
clicked=self.on_reload)
self.layout = ui.Column(
ui.GroupBox(title="Matrix",
layout=ui.Column(
ui.Row(ui.Label("Model:"),
self.matrix_model_text,
stretch=(1, 7)),
ui.Row(ui.Label("Closed channels:"),
self.matrix_channels_text,
stretch=(1, 7)))),
ui.GroupBox(title="HVSource",
layout=ui.Row(ui.Label("Model:"),
self.hvsrc_model_text,
stretch=(1, 7))),
ui.GroupBox(title="VSource",
layout=ui.Row(ui.Label("Model:"),
self.vsrc_model_text,
stretch=(1, 7))),
ui.GroupBox(title="LCRMeter",
layout=ui.Row(ui.Label("Model:"),
self.lcr_model_text,
stretch=(1, 7))),
ui.GroupBox(title="Electrometer",
layout=ui.Row(ui.Label("Model:"),
self.elm_model_text,
stretch=(1, 7))),
ui.GroupBox(title="Table",
layout=ui.Column(
ui.Row(ui.Label("Model:"),
self.table_model_text,
stretch=(1, 7)),
ui.Row(ui.Label("State:"),
self.table_state_text,
stretch=(1, 7)))),
ui.GroupBox(title="Environment Box",
layout=ui.Column(
ui.Row(ui.Label("Model:"),
self.env_model_text,
stretch=(1, 7)))), ui.Spacer(),
self.reload_status_button)
def __init__(self, **kwargs):
super().__init__(**kwargs)
self.title = "Position"
self._pos_x_label = PositionLabel()
self._pos_y_label = PositionLabel()
self._pos_z_label = PositionLabel()
self.layout = ui.Row(ui.Column(
ui.Label(text="X", tool_tip="X axis position."),
ui.Label(text="Y", tool_tip="Y axis position."),
ui.Label(text="Z", tool_tip="Z axis position.")),
ui.Column(self._pos_x_label, self._pos_y_label,
self._pos_z_label),
stretch=(1, 1))
def __init__(self, joystick_toggled=None, control_clicked=None, **kwargs):
super().__init__(**kwargs)
self.title = "Table"
self.checkable = True
self._joystick_button = ToggleButton(text="Joystick",
tool_tip="Toggle table joystick",
checkable=True,
toggled=self.on_joystick_toggled)
self._position_widget = PositionWidget()
self._calibration_widget = CalibrationWidget()
self._control_button = ui.Button(
text="Control...",
tool_tip="Open table controls dialog.",
clicked=self.on_control_clicked)
self.layout = ui.Row(self._position_widget,
self._calibration_widget,
ui.Spacer(),
ui.Column(ui.Spacer(), self._control_button,
self._joystick_button, ui.Spacer()),
stretch=(0, 0, 1, 0))
# Callbacks
self.joystick_toggled = joystick_toggled
self.control_clicked = control_clicked
self._joystick_limits = [0, 0, 0]
self.calibration_valid = False
def __init__(self, position_picked=None, absolute_move=None):
super().__init__()
self.position_picked = position_picked
self.absolute_move = absolute_move
self.positions_tree = ui.Tree(
header=("Name", "X", "Y", "Z", "Comment"),
root_is_decorated=False,
selected=self.on_position_selected,
double_clicked=self.on_position_double_clicked)
self.pick_button = ui.Button(
text="Assign &Position",
tool_tip="Assign current table position to selected position item",
clicked=self.on_pick_position,
enabled=False)
self.add_button = ui.Button(text="&Add",
tool_tip="Add new position item",
clicked=self.on_add_position)
self.edit_button = ui.Button(text="&Edit",
tool_tip="Edit selected position item",
clicked=self.on_edit_position,
enabled=False)
self.remove_button = ui.Button(
text="&Remove",
tool_tip="Remove selected position item",
clicked=self.on_remove_position,
enabled=False)
self.move_button = ui.Button(text="&Move",
tool_tip="Move to selected position",
clicked=self.on_move,
enabled=False)
self.append(self.positions_tree)
self.append(
ui.Column(self.pick_button, self.move_button, ui.Spacer(),
self.add_button, self.edit_button, self.remove_button))
self.stretch = 1, 0
def __init__(self, *args, **kwargs):
super().__init__(*args, **kwargs)
self.name_text = ui.Text(value="Unnamed")
self.x_number = ui.Number(value=0.,
minimum=0.,
maximum=1000.,
decimals=3,
suffix="mm")
self.y_number = ui.Number(value=0.,
minimum=0.,
maximum=1000.,
decimals=3,
suffix="mm")
self.z_number = ui.Number(value=0.,
minimum=0.,
maximum=1000.,
decimals=3,
suffix="mm")
self.comment_text = ui.Text()
self.button_box = ui.DialogButtonBox(buttons=("ok", "cancel"),
accepted=self.accept,
rejected=self.reject)
self.layout = ui.Column(
ui.Label("Name", tool_tip="Position name"), self.name_text,
ui.Label("X", tool_tip="Position X coordinate"), self.x_number,
ui.Label("Y", tool_tip="Position Y coordinate"), self.y_number,
ui.Label("Z", tool_tip="Position Z coordinate"), self.z_number,
ui.Label("Comment", tool_tip="Optional position comment"),
self.comment_text, self.button_box)
def __init__(self, position_picked=None, absolute_move=None):
super().__init__()
self.position_picked = position_picked
self.absolute_move = absolute_move
self.contacts_tree = ui.Tree(header=("Contact", "X", "Y", "Z", None),
selected=self.on_contacts_selected)
self.contacts_tree.fit()
self.pick_button = ui.Button(
text="Assign &Position",
tool_tip="Assign current table position to selected position item",
clicked=self.on_pick_position,
enabled=False)
self.calculate_button = ui.Button(text="&Calculate",
clicked=self.on_calculate,
enabled=False)
self.move_button = ui.Button(text="&Move",
tool_tip="Move to selected position",
clicked=self.on_move,
enabled=False)
self.reset_button = ui.Button(text="&Reset",
clicked=self.on_reset,
enabled=False)
self.reset_all_button = ui.Button(text="Reset &All",
clicked=self.on_reset_all)
self.append(self.contacts_tree)
self.append(
ui.Column(self.pick_button, self.move_button,
self.calculate_button, ui.Spacer(), self.reset_button,
self.reset_all_button))
self.stretch = 1, 0
def __init__(self, *args, table_move=None, table_contact=None, **kwargs):
super().__init__(*args, **kwargs)
self.table_move = table_move
self.table_contact = table_contact
self.use_table = False
self._position_valid = False
self.title = "Contact"
self._position_widget = PositionWidget()
self._position_widget.title = "Contact Position"
self._move_button = ui.Button(
text="Move",
tool_tip="Move table to position with safe Z position.",
clicked=self.on_move,
enabled=False)
self._contact_button = ui.Button(
text="Contact",
tool_tip="Move table to position and contact with sample.",
clicked=self.on_contact,
enabled=False)
self.layout.insert(
2,
ui.Row(self._position_widget,
ui.GroupBox(title="Table Control",
layout=ui.Column(self._move_button,
self._contact_button,
ui.Spacer())),
ui.Spacer(vertical=False),
stretch=(0, 0, 1)))
self.layout.insert(3, ui.Spacer())
self.layout.stretch = 0, 0, 0, 1
def __init__(self, *args, **kwargs):
super().__init__(*args, **kwargs)
self._step_size_number = ui.Number(value=0.,
minimum=0.,
maximum=1000.,
decimals=3,
suffix="mm")
self._z_limit_number = ui.Number(value=0.,
minimum=0.,
maximum=1000.,
decimals=3,
suffix="mm",
visible=False)
self._step_color_text = ui.Text()
self._button_box = ui.DialogButtonBox(buttons=("ok", "cancel"),
accepted=self.accept,
rejected=self.reject)
self.layout = ui.Column(
ui.Label("Size", tool_tip="Step size in millimeters"),
self._step_size_number,
ui.Label("Z-Limit",
tool_tip="Z-Limit in millimeters",
visible=False), self._z_limit_number,
ui.Label("Color", tool_tip="Color code for step"),
self._step_color_text, self._button_box)
def __init__(self):
super().__init__(title="Environment")
# Data series
self.box_temperature_series = []
self.chuck_temperature_series = []
self.box_humidity_series = []
# Plot
self.plot = ui.Plot(legend="right")
self.plot.add_axis("x", align="bottom", type="datetime")
self.plot.add_axis("y1",
align="left",
text="Temperature [°C]",
color="red")
self.plot.add_axis("y2",
align="right",
text="Humidity [%rH]",
color="blue")
self.plot.add_series("box_temperature",
"x",
"y1",
text="Box Temperature",
color="red")
self.plot.add_series("chuck_temperature",
"x",
"y1",
text="Chuck Temperature",
color="magenta")
self.plot.add_series("box_humidity",
"x",
"y2",
text="Box Humidity",
color="blue")
# Inputs
self.box_temperature_number = ui.Number(suffix="°C",
decimals=1,
readonly=True)
self.box_humidity_number = ui.Number(suffix="%rH",
decimals=1,
readonly=True)
self.chuck_temperature_number = ui.Number(suffix="°C",
decimals=1,
readonly=True)
self.box_lux_number = ui.Number(suffix="Lux",
decimals=1,
readonly=True)
self.box_light_text = ui.Text(readonly=True)
self.box_door_text = ui.Text(readonly=True)
# Layout
self.layout = ui.Column(
self.plot,
ui.Label("Box Temperature"), self.box_temperature_number,
ui.Label("Box Humidity"), self.box_humidity_number,
ui.Label("Chuck Temperature"), self.chuck_temperature_number,
ui.Label("Box Light"), self.box_lux_number,
ui.Label("Box Light State"), self.box_light_text,
ui.Label("Box Door State"), self.box_door_text, ui.Spacer())
def __init__(self, *args, **kwargs):
super().__init__(*args, **kwargs)
self.title_label = ui.Label(
stylesheet="font-size: 16px; font-weight: bold; height: 32px;")
self.title_label.qt.setTextFormat(QtCore.Qt.RichText)
self.description_label = ui.Label()
self.layout = ui.Column(self.title_label, self.description_label,
ui.Spacer())
def __init__(self, *args, table_move_to=None, table_contact=None, **kwargs):
super().__init__(*args, **kwargs)
self.table_move_to = table_move_to
self.table_contact = table_contact
self.title = "Contact"
self.pos_x_label = PositionLabel()
self.pos_y_label = PositionLabel()
self.pos_z_label = PositionLabel()
# self.move_to_button = ui.Button(
# text="Move to",
# tool_tip="Move table to position with safe Z distance.",
# clicked=self.on_move_to,
# enabled=False
# )
self.contact_button = ui.Button(
text="Contact",
tool_tip="Move table to position and contact.",
clicked=self.on_contact,
enabled=False
)
self.layout.insert(2, ui.Row(
ui.GroupBox(
title="Position",
layout=ui.Row(
ui.Column(
ui.Label("X"),
ui.Label("Y"),
ui.Label("Z")
),
ui.Column(
self.pos_x_label,
self.pos_y_label,
self.pos_z_label,
)
)
),
ui.GroupBox(
title="Table Actions",
layout=ui.Column(
# self.move_to_button,
self.contact_button
)
),
ui.Spacer(vertical=False),
))
def __init__(self, **kwargs):
super().__init__(**kwargs)
self.title = "Calibration"
self._cal_x_label = CalibrationLabel("cal")
self._cal_y_label = CalibrationLabel("cal")
self._cal_z_label = CalibrationLabel("cal")
self._rm_x_label = CalibrationLabel("rm")
self._rm_y_label = CalibrationLabel("rm")
self._rm_z_label = CalibrationLabel("rm")
self.layout = ui.Row(ui.Column(
ui.Label(text="X", tool_tip="X axis calibration state."),
ui.Label(text="Y", tool_tip="Y axis calibration state."),
ui.Label(text="Z", tool_tip="Z axis calibration state.")),
ui.Column(self._cal_x_label, self._cal_y_label,
self._cal_z_label),
ui.Column(self._rm_x_label, self._rm_y_label,
self._rm_z_label),
stretch=(1, 1, 1))
def __init__(self, position_picked=None, **kwargs):
super().__init__(**kwargs)
self.position_picked = position_picked
self._name_text = ui.Text(value="Unnamed")
self._x_number = ui.Number(value=0.,
minimum=0.,
maximum=1000.,
decimals=3,
suffix="mm")
self._y_number = ui.Number(value=0.,
minimum=0.,
maximum=1000.,
decimals=3,
suffix="mm")
self._z_number = ui.Number(value=0.,
minimum=0.,
maximum=1000.,
decimals=3,
suffix="mm")
self._comment_text = ui.Text()
self._assign_button = ui.Button(
text="Assign Position",
tool_tip="Assign current table position.",
clicked=self.on_assign_clicked)
self._button_box = ui.DialogButtonBox(buttons=("ok", "cancel"),
accepted=self.accept,
rejected=self.reject)
self.layout = ui.Column(
ui.Label("Name", tool_tip="Position name"), self._name_text,
ui.Row(
ui.Column(ui.Label("X", tool_tip="Position X coordinate"),
self._x_number),
ui.Column(ui.Label("Y", tool_tip="Position Y coordinate"),
self._y_number),
ui.Column(ui.Label("Z", tool_tip="Position Z coordinate"),
self._z_number),
ui.Column(
ui.Spacer(),
self._assign_button,
)), ui.Label("Comment", tool_tip="Optional position comment"),
self._comment_text, ui.Spacer(), self._button_box)
def register_environment(self):
self.status_env_chuck_temperature = ui.Text(value=NO_VALUE,
readonly=True)
self.status_env_box_temperature = ui.Text(value=NO_VALUE,
readonly=True)
self.status_env_box_humidity = ui.Text(value=NO_VALUE, readonly=True)
self.bind("status_env_chuck_temperature",
self.status_env_chuck_temperature, NO_VALUE)
self.bind("status_env_box_temperature",
self.status_env_box_temperature, NO_VALUE)
self.bind("status_env_box_humidity", self.status_env_box_humidity,
NO_VALUE)
self.status_panel.append(
ui.GroupBox(title="Environment Status",
layout=ui.Column(
ui.Row(
ui.Column(ui.Label("Chuck temp."),
self.status_env_chuck_temperature),
ui.Column(ui.Label("Box temp."),
self.status_env_box_temperature),
ui.Column(ui.Label("Box humid."),
self.status_env_box_humidity)))))
def handler(state):
if 'env_chuck_temperature' in state:
value = state.get('env_chuck_temperature', )
self.status_env_chuck_temperature.value = format_metric(
value, "°C", decimals=2)
if 'env_box_temperature' in state:
value = state.get('env_box_temperature')
self.status_env_box_temperature.value = format_metric(
value, "°C", decimals=2)
if 'env_box_humidity' in state:
value = state.get('env_box_humidity')
self.status_env_box_humidity.value = format_metric(value,
"%rH",
decimals=2)
self.state_handlers.append(handler)
def main():
app = comet.Application()
app.title = "Measurement"
def on_finish():
start_button.enabled = True
stop_button.enabled = False
current_number.value = 0
def on_reading(value):
print(value)
current_number.value = value
def on_start():
start_button.enabled = False
stop_button.enabled = True
process = app.processes.get("measure")
process.start()
def on_stop():
start_button.enabled = False
stop_button.enabled = False
process = app.processes.get("measure")
process.stop()
def on_voltage(value):
process = app.processes.get("measure")
process.set('voltage', value)
process = comet.Process(target=measure)
process.finished = on_finish
process.failed = ui.show_exception
process.reading = on_reading
app.processes.add("measure", process)
voltage_number = ui.Number(value=0, minimum=0, maximum=1000, decimals=1, suffix="V", changed=on_voltage)
current_number = ui.Number(readonly=True, value=0, decimals=3, suffix="mA", stylesheet="color: red")
start_button = ui.Button(text="Start", clicked=on_start)
stop_button = ui.Button(text="Stop", enabled=False, clicked=on_stop)
l = ui.Column(
ui.Label("Voltage"),
voltage_number,
ui.Label("Current"),
current_number,
start_button,
stop_button,
ui.Spacer()
)
app.layout = l
return app.run()
def __init__(self, context, table_enabled):
super().__init__()
self.title = "Start Sequence"
self._contact_checkbox = ui.CheckBox(
text="Move table and contact with Probe Card",
checked=True,
enabled=table_enabled)
self._position_checkbox = ui.CheckBox(
text="Move table after measurements",
checked=False,
enabled=table_enabled,
changed=self.on_position_checkbox_toggled)
self._positions_combobox = PositionsComboBox(enabled=False)
self._operator_combobox = OperatorWidget()
self._output_combobox = WorkingDirectoryWidget()
self._button_box = ui.DialogButtonBox(buttons=("yes", "no"),
accepted=self.accept,
rejected=self.reject)
self._button_box.qt.button(
self._button_box.QtClass.Yes).setAutoDefault(False)
self._button_box.qt.button(
self._button_box.QtClass.No).setDefault(True)
self.layout = ui.Column(
ui.Label(text=self._create_message(context)),
ui.GroupBox(title="Table",
layout=ui.Column(
self._contact_checkbox,
ui.Row(self._position_checkbox,
self._positions_combobox), ui.Spacer())),
ui.Row(ui.GroupBox(title="Operator",
layout=self._operator_combobox),
ui.GroupBox(title="Working Directory",
layout=self._output_combobox),
stretch=(2, 3)),
self._button_box,
stretch=(1, 0, 0, 0))
def __init__(self, restore=None):
super().__init__(title="Measurement")
self.restore = restore
self.panels = PanelStack()
self.measure_restore_button = ui.Button(
text="Restore Defaults",
tool_tip="Restore default measurement parameters.",
clicked=self.on_measure_restore
)
self.measure_controls = ui.Row(
self.measure_restore_button,
ui.Spacer(),
visible=False
)
self.layout = ui.Column(
self.panels,
self.measure_controls,
stretch=(1, 0)
)
def main():
app = comet.Application()
app.title = "Plot"
app.about = "An example plot application."
def on_reset():
for series in plot.series.values():
series.clear()
plot.fit()
def on_reading(value):
time, temp, humid = value
plot.series.get("temp").append(time, temp)
plot.series.get("humid").append(time, humid)
if plot.zoomed:
plot.update("x")
else:
plot.fit()
plot = ui.Plot(legend="bottom")
plot.add_axis("x", align="bottom", type="datetime")
plot.add_axis("y1", align="left", text="Temperature [°C]", color="red")
plot.add_axis("y2", align="right", text="Humidity [%rH]", color="blue")
plot.add_series("temp", "x", "y1", text="Temperature", color="red")
plot.add_series("humid", "x", "y2", text="Humidity", color="blue")
reset_button = ui.Button(text="Reset", clicked=on_reset)
app.layout = ui.Column(plot, reset_button)
process = comet.Process(target=fake_data)
process.reading = on_reading
process.failed = ui.show_exception
process.start()
app.processes.add("process", process)
return app.run()
def __init__(self):
super().__init__(title="Table")
self.temporary_z_limit_changed = None
self._steps_tree = ui.Tree(header=("Size", "Z-Limit", "Color"),
root_is_decorated=False)
# Hide Z-Limit column
self._steps_tree.qt.setColumnHidden(1, True)
self._steps_tree.selected = self.on_position_selected
self._steps_tree.double_clicked = self.on_steps_tree_double_clicked
self._steps_tree.qt.setItemDelegateForColumn(
0, ItemDelegate(self._steps_tree.qt))
self._steps_tree.qt.setItemDelegateForColumn(
1, ItemDelegate(self._steps_tree.qt))
self._add_step_button = ui.Button(text="&Add",
tool_tip="Add table step",
clicked=self.on_add_step_clicked)
self._edit_step_button = ui.Button(text="&Edit",
tool_tip="Edit selected table step",
enabled=False,
clicked=self.on_edit_step_clicked)
self._remove_step_button = ui.Button(
text="&Remove",
tool_tip="Remove selected table step",
enabled=False,
clicked=self.on_remove_step_clicked)
self._z_limit_movement_number = ui.Number(
minimum=0,
maximum=128.0,
decimals=3,
suffix="mm",
changed=self.on_z_limit_movement_changed)
def create_number():
return ui.Number(minimum=0,
maximum=1000.0,
decimals=3,
suffix="mm")
self._probecard_limit_x_maximum_number = create_number()
self._probecard_limit_y_maximum_number = create_number()
self._probecard_limit_z_maximum_number = create_number()
self._probecard_limit_z_maximum_checkbox = ui.CheckBox(
text="Temporary Z-Limit",
tool_tip="Select to show temporary Z-Limit notice.")
self._joystick_limit_x_maximum_number = create_number()
self._joystick_limit_y_maximum_number = create_number()
self._joystick_limit_z_maximum_number = create_number()
self._probecard_contact_delay_number = ui.Number(minimum=0,
maximum=3600,
decimals=2,
step=.1,
suffix="s")
self._recontact_overdrive_number = ui.Number(minimum=0,
maximum=0.025,
decimals=3,
step=.001,
suffix="mm")
self.layout = ui.Column(
ui.GroupBox(title="Control Steps (mm)",
layout=ui.Row(self._steps_tree,
ui.Column(self._add_step_button,
self._edit_step_button,
self._remove_step_button,
ui.Spacer()),
stretch=(1, 0))),
ui.GroupBox(title="Movement Z-Limit",
layout=ui.Column(self._z_limit_movement_number)),
ui.GroupBox(title="Probe Card Limts",
layout=ui.Row(
ui.Column(ui.Label("X"),
self._probecard_limit_x_maximum_number),
ui.Column(ui.Label("Y"),
self._probecard_limit_y_maximum_number),
ui.Column(ui.Label("Z"),
self._probecard_limit_z_maximum_number),
ui.Column(
ui.Label(),
ui.Label("Maximum"),
), ui.Spacer(),
ui.Column(
ui.Label(),
self._probecard_limit_z_maximum_checkbox,
))),
ui.GroupBox(title="Joystick Limits",
layout=ui.Row(
ui.Column(ui.Label("X"),
self._joystick_limit_x_maximum_number),
ui.Column(ui.Label("Y"),
self._joystick_limit_y_maximum_number),
ui.Column(ui.Label("Z"),
self._joystick_limit_z_maximum_number),
ui.Column(
ui.Label(),
ui.Label("Maximum"),
), ui.Spacer())),
ui.Row(ui.GroupBox(title="Probecard Contact Delay",
layout=ui.Row(
self._probecard_contact_delay_number)),
ui.GroupBox(title="Re-Contact Z-Overdrive (1x)",
layout=ui.Row(
self._recontact_overdrive_number)),
stretch=(0, 1)),
stretch=(1, 0, 0, 0, 0))
def __init__(self, *args, **kwargs):
super().__init__(*args, **kwargs)
self.title = "Frequency Scan"
self.register_vsource()
self.register_lcr()
self.register_environment()
self.plot = ui.Plot(height=300, legend="right")
self.plot.add_axis("x", align="bottom", text="Voltage [V] (abs)")
self.plot.add_axis("y", align="right", text="Capacitance [pF]")
self.plot.add_series("lcr", "x", "y", text="LCR", color="blue")
self.data_tabs.insert(0, ui.Tab(title="CV Curve", layout=self.plot))
self.bias_voltage = ui.Number(decimals=3, suffix="V")
self.hvsrc_current_compliance = ui.Number(decimals=3, suffix="uA")
self.lcr_frequency_start = ui.Number(minimum=0,
decimals=3,
suffix="Hz")
self.lcr_frequency_stop = ui.Number(minimum=0,
decimals=3,
suffix="MHz")
self.lcr_frequency_steps = ui.Number(minimum=1,
maximum=1000,
decimals=0)
self.lcr_amplitude = ui.Number(minimum=0, decimals=3, suffix="mV")
self.bind("bias_voltage", self.bias_voltage, 0, unit="V")
self.bind("hvsrc_current_compliance",
self.hvsrc_current_compliance,
0,
unit="uA")
self.bind("lcr_frequency_start",
self.lcr_frequency_start,
0,
unit="Hz")
self.bind("lcr_frequency_stop", self.lcr_frequency_stop, 0, unit="MHz")
self.bind("lcr_frequency_steps", self.lcr_frequency_steps, 1)
self.bind("lcr_amplitude", self.lcr_amplitude, 0, unit="mV")
self.general_tab.layout = ui.Row(
ui.GroupBox(title="HV Source",
layout=ui.Column(ui.Label(text="Bias Voltage"),
self.bias_voltage,
ui.Label(text="Current Compliance"),
self.hvsrc_current_compliance,
ui.Spacer())),
ui.GroupBox(title="LCR",
layout=ui.Column(
ui.Label(text="AC Frequency Start"),
self.lcr_frequency_start,
ui.Label(text="AC Frequency Stop"),
self.lcr_frequency_stop,
ui.Label(text="AC Frequency Steps (log10)"),
self.lcr_frequency_steps,
ui.Label(text="AC Amplitude"), self.lcr_amplitude,
ui.Spacer())),
ui.Spacer(),
stretch=(1, 1, 1))
fahrad = comet.ureg('F')
volt = comet.ureg('V')
self.series_transform['lcr'] = lambda x, y: ((x * volt).to('V').m,
(y * fahrad).to('pF').m)
self.series_transform['xfit'] = self.series_transform.get('lcr')
def __init__(self, *args, **kwargs):
super().__init__(*args, **kwargs)
self.title = "CV Ramp (V Source)"
self.register_hvsource()
self.register_lcr()
self.register_environment()
self.plot = ui.Plot(height=300, legend="right")
self.plot.add_axis("x", align="bottom", text="Voltage [V] (abs)")
self.plot.add_axis("y", align="right", text="Capacitance [pF]")
self.plot.add_series("lcr", "x", "y", text="LCR Cp", color="blue")
self.data_tabs.insert(0, ui.Tab(title="CV Curve", layout=self.plot))
self.plot2 = ui.Plot(height=300, legend="right")
self.plot2.add_axis("x", align="bottom", text="Voltage [V] (abs)")
self.plot2.add_axis("y", align="right", text="1/Capacitance² [1/F²]")
self.plot2.axes.get("y").qt.setLabelFormat("%G")
self.plot2.add_series("lcr2", "x", "y", text="LCR Cp", color="blue")
self.data_tabs.insert(1, ui.Tab(title="1/C² Curve", layout=self.plot2))
self.voltage_start = ui.Number(decimals=3, suffix="V")
self.voltage_stop = ui.Number(decimals=3, suffix="V")
self.voltage_step = ui.Number(minimum=0,
maximum=200,
decimals=3,
suffix="V")
self.waiting_time = ui.Number(minimum=0, decimals=2, suffix="s")
self.vsrc_current_compliance = ui.Number(decimals=3, suffix="uA")
self.lcr_frequency = ui.Number(value=1,
minimum=0.020,
maximum=20e3,
decimals=3,
suffix="kHz")
self.lcr_amplitude = ui.Number(minimum=0, decimals=3, suffix="mV")
self.bind("bias_voltage_start", self.voltage_start, 0, unit="V")
self.bind("bias_voltage_stop", self.voltage_stop, 100, unit="V")
self.bind("bias_voltage_step", self.voltage_step, 1, unit="V")
self.bind("waiting_time", self.waiting_time, 1, unit="s")
self.bind("vsrc_current_compliance",
self.vsrc_current_compliance,
0,
unit="uA")
self.bind("lcr_frequency", self.lcr_frequency, 1.0, unit="kHz")
self.bind("lcr_amplitude", self.lcr_amplitude, 250, unit="mV")
self.general_tab.layout = ui.Row(
ui.GroupBox(title="V Source Ramp",
layout=ui.Column(ui.Label(text="Start"),
self.voltage_start,
ui.Label(text="Stop"),
self.voltage_stop,
ui.Label(text="Step"),
self.voltage_step,
ui.Label(text="Waiting Time"),
self.waiting_time, ui.Spacer())),
ui.GroupBox(title="V Source",
layout=ui.Column(ui.Label(text="Compliance"),
self.vsrc_current_compliance,
ui.Spacer())),
ui.GroupBox(title="LCR",
layout=ui.Column(ui.Label(text="AC Frequency"),
self.lcr_frequency,
ui.Label(text="AC Amplitude"),
self.lcr_amplitude, ui.Spacer())),
stretch=(1, 1, 1))
fahrad = comet.ureg('F')
volt = comet.ureg('V')
self.series_transform['lcr'] = lambda x, y: ((x * volt).to('V').m,
(y * fahrad).to('pF').m)
def __init__(self, *args, **kwargs):
super().__init__(*args, **kwargs)
self.title = "IV Ramp Bias Elm"
self.register_vsource()
self.register_hvsource()
self.register_electrometer()
self.register_environment()
self.plot = ui.Plot(height=300, legend="right")
self.plot.add_axis("x", align="bottom", text="Voltage [V]")
self.plot.add_axis("y", align="right", text="Current [uA]")
self.plot.add_series("elm",
"x",
"y",
text="Electrometer",
color="blue")
self.plot.add_series("xfit", "x", "y", text="Fit", color="magenta")
self.data_tabs.insert(0, ui.Tab(title="IV Curve", layout=self.plot))
self.voltage_start = ui.Number(decimals=3, suffix="V")
self.voltage_stop = ui.Number(decimals=3, suffix="V")
self.voltage_step = ui.Number(minimum=0,
maximum=200,
decimals=3,
suffix="V")
self.waiting_time = ui.Number(minimum=0, decimals=2, suffix="s")
self.bias_voltage = ui.Number(decimals=3, suffix="V")
self.bias_mode = ui.ComboBox(["constant", "offset"])
self.hvsrc_current_compliance = ui.Number(decimals=3, suffix="uA")
self.hvsrc_accept_compliance = ui.CheckBox("Accept Compliance")
self.vsrc_current_compliance = ui.Number(decimals=3, suffix="uA")
self.vsrc_accept_compliance = ui.CheckBox("Accept Compliance")
self.bind("voltage_start", self.voltage_start, 0, unit="V")
self.bind("voltage_stop", self.voltage_stop, 0, unit="V")
self.bind("voltage_step", self.voltage_step, 0, unit="V")
self.bind("waiting_time", self.waiting_time, 1, unit="s")
self.bind("bias_voltage", self.bias_voltage, 0, unit="V")
self.bind("bias_mode", self.bias_mode, "constant")
self.bind("hvsrc_current_compliance",
self.hvsrc_current_compliance,
0,
unit="uA")
self.bind("hvsrc_accept_compliance", self.hvsrc_accept_compliance,
False)
self.bind("vsrc_current_compliance",
self.vsrc_current_compliance,
0,
unit="uA")
self.bind("vsrc_accept_compliance", self.vsrc_accept_compliance, False)
self.general_tab.layout = ui.Row(
ui.GroupBox(title="HV Source Ramp",
layout=ui.Column(ui.Label(text="Start"),
self.voltage_start,
ui.Label(text="Stop"),
self.voltage_stop,
ui.Label(text="Step"),
self.voltage_step,
ui.Label(text="Waiting Time"),
self.waiting_time, ui.Spacer())),
ui.GroupBox(title="V Source Bias",
layout=ui.Column(ui.Label(text="Bias Voltage"),
self.bias_voltage,
ui.Label(text="Bias Compliance"),
self.vsrc_current_compliance,
self.vsrc_accept_compliance,
ui.Label(text="Bias Mode"),
self.bias_mode, ui.Spacer())),
ui.GroupBox(title="HV Source",
layout=ui.Column(ui.Label(text="Compliance"),
self.hvsrc_current_compliance,
self.hvsrc_accept_compliance,
ui.Spacer())),
stretch=(1, 1, 1))
ampere = comet.ureg('A')
volt = comet.ureg('V')
self.series_transform['elm'] = lambda x, y: ((x * volt).to('V').m,
(y * ampere).to('uA').m)
self.series_transform['xfit'] = self.series_transform.get('elm')
def main():
app = comet.Application()
def on_activated(item):
ui.show_info(text=format(item.value))
def on_selected(item):
print("Item", format(item.value))
table = ui.Table()
table.header = "Name", "Status", "HV", "Current", "Temp.", "Calib."
table.stretch = True
table.activated = on_activated
table.selected = on_selected
for i in range(10):
table.append([
f"Unnamed{i}", "OK", "", "n/a", "n/a",
f"{random.random()*1000:.0f} ohm"
])
# First column user checkable
table[i][0].checkable = True
table[i][0].checked = random.choice([True, False])
# First column editabled
table[i][0].readonly = False
table.qt.setCurrentItem(table[0][0].qt)
table.fit()
def on_activated(index, item):
ui.show_info(text=format(item[index].value))
def on_selected(item):
print("Item", format(item[0].value))
tree = ui.Tree()
tree.header = "Measurement", "Status"
tree.activated = on_activated
tree.selected = on_selected
tree.append(["Flute 1", "OK"])
tree.clear()
tree.append(["Flute 2", "OK"])
tree.insert(0, ["Flute 3", "Meas..."])
tree[0][0].checked = True
tree[0][1].color = "red"
tree[0][1].background = "blue"
#tree[0][1].color = None
tree[0][1].background = None
tree.append(["Flute 4", "OK"])
tree.append(["Flute 5", "OK"])
tree.append(["Flute 6"])
tree.qt.setCurrentItem(tree[2].qt)
tree.remove(tree[3])
for i, item in enumerate(tree):
if i == 1:
item.expanded = True
item[0].checked = True
item.append(["Test 1", "OK"])
item.append(["Test 2", "OK"])
item.insert(0, ["Test 3", "OK"])
item.children[0][0].checked = True
item.children[1][0].checked = False
item.children[2][0].checked = True
for item in tree:
print(item[0].checked)
for item in item.children:
print(item[0].checked)
def measure(process):
while process.running:
for i in range(10):
value = random.choice([True, False])
process.emit('hv', i, value)
value = random.uniform(22., 24.)
process.emit('temp', i, value)
for i in range(2):
value = random.choice(["OK", "FAIL"])
process.emit('status', i, value)
time.sleep(1)
def on_hv(i, value):
item = table[i][2]
if table[i][0].checked:
item.value = {True: "ON", False: "OFF"}[value]
item.color = {True: "green", False: "red"}[value]
item.bold = not value
else:
item.value = None
def on_temp(i, value):
item = table[i][4]
if table[i][0].checked:
item.value = value
item.color = "green"
if item.value < 22.5:
item.color = "red"
else:
item.value = None
def on_status(i, value):
color = {"OK": "green", "FAIL": "red"}[value]
tree[i][1].value = value
tree[i][1].color = color
tree[i][1].bold = value == "FAIL"
for item in tree[i].children:
if item[0].checked:
item[1].value = value
item[1].color = color
item[1].bold = value == "FAIL"
else:
item[1].value = None
app.layout = ui.Column(table, tree)
process = comet.Process(target=measure)
process.hv = on_hv
process.temp = on_temp
process.status = on_status
app.processes.add("process", process)
process.start()
return app.run()
