def checkResult(self):
# show return message
self.info = commons.show_return_msg(self.return_json)
# # if self.result == '0':
self.infos = json.loads(self.info)
result_status = commons.get_parameter_from_xls(self.infos, "success",
None)
# email = commons.get_value_from_return_json(self.info, 'member', 'email')
print(result_status)
self.assertEqual(result_status, self.result)
# print('第六步，記錄響應結果')
commons.Deposit_xls('caseforparame.xlsx', 'Repairshistory', self.info,
self.case_name)
def checkResult(self):
"""
check test result
:return:
"""
self.info = commons.show_return_msg(self.return_json)
# # if self.result == '0':
self.infos = json.loads(self.info)
result_status = commons.get_parameter_from_xls(self.infos, "success", None)
# email = commons.get_value_from_return_json(self.info, 'member', 'email')
print(result_status)
self.assertEqual(result_status, self.result)
# print('第六步，記錄響應結果')
commons.Deposit_xls('caseforparame.xlsx', 'DispatchingTags', self.info, self.case_name)
def test01_Itemsdetails(self):
# 依賴其他接口
get_xls_Addrepair = commons.get_xls("caseforparame.xlsx", "Addproject")
try:
xls_01 = get_xls_Addrepair[0]
xls_02 = get_xls_Addrepair[1]
except:
print("超出列表值")
xls_reponses_Addrepairs = get_xls_Addrepair[0][-1]
xls_reponses_Addrepair = json.loads(xls_reponses_Addrepairs)
# set url
self._testMethodDoc = self.case_name
self.url = commons.get_url_from_xml('Itemsdetails')
self.id_change = commons.get_parameter_from_xls(
xls_reponses_Addrepair, 'id', None)
self.url_last = self.url + "/" + str(self.id_change)
configHttp.set_url(self.url_last)
print("第一步：设置url " + self.url_last)
#set headers
Content_Type = localReadConfig.get_headers('Content-Type')
no_cache = localReadConfig.get_headers('Cache-Control')
header = {
"Content-Type": Content_Type,
'Authorization': Authorization_id,
'Cache-Control': no_cache
}
print('header%s ' % header)
configHttp.set_headers(header)
print("第二步：设置header等")
#set params
# data = {
# "attachmentId": self.attachmentId,
# "cnName":self.cnName,
# "employeeId":self.employeeId,
# "enName":self.enName,
# "isReleased":self.isReleased,
# "tel":self.tel
# }
#
# DATE = json.dumps(data)
# print('DATE%s' % DATE)
# configHttp.set_data(DATE)
print("第三步：设置发送请求的参数")
self.logger.info("********creater********")
# test interface
try:
self.return_json = configHttp.get()
except Exception as e:
print('e %s' % e)
method = str(self.return_json.request
)[int(str(self.return_json.request).find('[')) +
1:int(str(self.return_json.request).find(']'))]
print("第四步：发送请求\n\t\t请求方法：" + method)
print("第五步：检查结果")
self.checkResult()
return self.return_json
def test01_Dispatchingre(self):
#依賴其他接口參數
xls_reponses = commons.Deposit_xls_relyon("caseforparame.xlsx",
"Dispatchingre",
"Repairreapply",
self.case_name)
xls_reponse = json.loads(xls_reponses)
# set url
print('case ###############################################%s' %
self.case_name)
self._testMethodDoc = self.case_name
self.url = commons.get_url_from_xml('Dispatchingre')
self.id_change = commons.get_parameter_from_xls(
xls_reponse, "id", None)
self.url_new = self.url + "/" + str(self.id_change)
configHttp.set_url(self.url_new)
print("第一步：设置url " + self.url_new)
# get visitor token
# if self.token == '0':
# token = localReadConfig.get_headers("token_v")
# elif self.token == '1':
# token = None
#set headers
Content_Type = localReadConfig.get_headers('Content-Type')
no_cache = localReadConfig.get_headers('Cache-Control')
header = {
"Content-Type": Content_Type,
'Authorization': Authorization_id,
'Cache-Control': no_cache
}
print('header%s ' % header)
configHttp.set_headers(header)
print("第二步：设置header等")
# set params
data = {
"day": self.day,
"operation": self.operation,
"receiverCnName": self.receiverCnName,
"receiverEnName": self.receiverEnName,
"receiverId": self.receiverId,
"receiverIsoutsider": self.receiverIsoutsider,
"remarks": self.remarks
}
DATE = json.dumps(data)
print('DATE%s' % DATE)
configHttp.set_data(DATE)
print("第三步：设置发送请求的参数")
self.logger.info("********creater********")
# test interface
try:
self.return_json = configHttp.post()
except Exception as e:
print('e %s' % e)
method = str(self.return_json.request
)[int(str(self.return_json.request).find('[')) +
1:int(str(self.return_json.request).find(']'))]
print("第四步：发送请求\n\t\t请求方法：" + method)
print("第五步：检查结果")
self.checkResult()
return self.return_json
def test01_Repairreapply(self):
#依赖其他接口数据
get_xls_Addrepair = commons.get_xls("caseforparame.xlsx", "Addrepair")
try:
xls_02 = get_xls_Addrepair[4]
except:
print("超出列表值")
xls_reponses_Addrepairs = get_xls_Addrepair[4][-1]
xls_reponses_Addrepair = json.loads(xls_reponses_Addrepairs)
# set url
# pa = json.loads(self.relyon_response)
self.url = commons.get_url_from_xml('Repairreapply')
self.url_new = self.url.split("/")
self.id_change = commons.get_parameter_from_xls(
xls_reponses_Addrepair, 'id', None)
self.url_last = "/" + self.url_new[1] + "/" + str(
self.id_change) + "/" + self.url_new[2]
configHttp.set_url(self.url_last)
print("第一步：设置url " + self.url_last)
# get visitor token
# if self.token == '0':
# token = localReadConfig.get_headers("token_v")
# elif self.token == '1':
# token = None
#set headers
Content_Type = localReadConfig.get_headers('Content-Type')
no_cache = localReadConfig.get_headers('Cache-Control')
header = {
"Content-Type": Content_Type,
'Authorization': Authorization_id,
'Cache-Control': no_cache
}
print('header%s ' % header)
configHttp.set_headers(header)
print("第二步：设置header等")
#set params
data = {
"addr": self.addr,
"attachmentIds": [self.attachmentIds],
"id": self.id_change,
"itemCnName": self.itemCnName,
"itemEnName": self.itemEnName,
"itemId": self.itemId,
"landCnName": self.landCnName,
"landEnName": self.landEnName,
"landId": self.landId,
"remark": self.remark,
"roomCnName": self.roomCnName,
"roomEnName": self.roomEnName,
"roomId": self.roomId,
"roomTypeKey": self.roomTypeKey,
"tel": self.tel
}
DATE = json.dumps(data)
print('DATE%s' % DATE)
configHttp.set_data(DATE)
print("第三步：设置发送请求的参数")
self.logger.info("********creater********")
try:
self.return_json = configHttp.post()
except Exception as e:
print('e %s' % e)
method = str(self.return_json.request
)[int(str(self.return_json.request).find('[')) +
1:int(str(self.return_json.request).find(']'))]
print("第四步：发送请求\n\t\t请求方法：" + method)
print("第五步：检查结果")
self.checkResult()
return self.return_json
def test01_listRepairUsers(self):
#依賴其他接口參數
get_xls = commons.get_xls("caseforparame.xlsx", "Addrepair")
try:
xls_01 = get_xls[0]
xls_02 = get_xls[1]
except:
print("超出列表值")
xls_reponses = get_xls[0][-1]
xls_reponse = json.loads(xls_reponses)
localReadConfig = readConfig.ReadConfig()
configHttp = ConfigHttp.ConfigHttp()
info = {}
Authorization_id = commons.get_Authorization()
# set url
self.repairId = commons.get_parameter_from_xls(xls_reponse, "id", None)
self._testMethodDoc = self.case_name
self.url = commons.get_url_from_xml('listRepairUsers')
#+"keywords="+self.keywords+ "&"+"maxPageItems="+self.maxPageItems+"&"
self.url_new = self.url+"?"+"repairId="+str(self.repairId)
configHttp.set_url(self.url_new)
print("第一步：设置url "+self.url_new)
# get visitor token
# if self.token == '0':
# token = localReadConfig.get_headers("token_v")
# elif self.token == '1':
# token = None
#set headers
Content_Type = localReadConfig.get_headers('Content-Type')
no_cache = localReadConfig.get_headers('Cache-Control')
header = {'Authorization':Authorization_id,'Cache-Control':no_cache}
print('header%s ' % header )
configHttp.set_headers(header)
print("第二步：设置header等")
# set params
# data = {
# "keywords":self.keywords,
# "maxPageItems": self.maxPageItems,
# "offsetStart": self.offsetStart,
# "repairId ":self.repairId
# }
# DATE = json.dumps(data)
# print('DATE%s' % DATE)
# configHttp.set_params(DATE)
print("第三步：设置发送请求的参数")
self.logger.info("********creater********")
# test interface
try:
self.return_json = configHttp.get()
except Exception as e:
print('e %s' % e)
method = str(self.return_json.request)[int(str(self.return_json.request).find('['))+1:int(str(self.return_json.request).find(']'))]
print("第四步：发送请求\n\t\t请求方法："+method)
print("第五步：检查结果")
self.checkResult()
return self.return_json
def test01_Repaircomplete(self):
#依賴其他接口
get_xls_Addrepair = commons.get_xls("caseforparame.xlsx", "Addrepair")
try:
xls_01 = get_xls_Addrepair[0]
xls_02 = get_xls_Addrepair[1]
except:
print("超出列表值")
xls_reponses_Addrepairs = get_xls_Addrepair[0][-1]
xls_reponses_Addrepair = json.loads(xls_reponses_Addrepairs)
# set url
self.url = commons.get_url_from_xml('Repaircomplete')
self.url_new = self.url.split("/")
self.id_change = commons.get_parameter_from_xls(
xls_reponses_Addrepair, 'id', None)
self.url_last = "/" + self.url_new[1] + "/" + str(
self.id_change) + "/" + self.url_new[2]
configHttp.set_url(self.url_last)
print("第一步：设置url " + self.url_last)
# get visitor token
# if self.token == '0':
# token = localReadConfig.get_headers("token_v")
# elif self.token == '1':
# token = None
#set headers
Content_Type = localReadConfig.get_headers('Content-Type')
no_cache = localReadConfig.get_headers('Cache-Control')
header = {
"Content-Type": Content_Type,
'Authorization': Authorization_id,
'Cache-Control': no_cache
}
print('header%s ' % header)
configHttp.set_headers(header)
print("第二步：设置header等")
#set params
data = {
"option ": {
"serviceEvaluation": self.serviceEvaluation,
"serviceScore": self.serviceScore
}
}
DATE = json.dumps(data)
print('DATE%s' % DATE)
configHttp.set_data(DATE)
print("第三步：设置发送请求的参数")
self.logger.info("********creater********")
try:
self.return_json = configHttp.post()
except Exception as e:
print('e %s' % e)
method = str(self.return_json.request
)[int(str(self.return_json.request).find('[')) +
1:int(str(self.return_json.request).find(']'))]
print("第四步：发送请求\n\t\t请求方法：" + method)
print("第五步：检查结果")
self.checkResult()
return self.return_json
def test01_Groupsedit(self):
#依賴其他接口參數
Addproject_xls = commons.get_xls("caseforparame.xlsx", "AddGroups")
xls_01 = Addproject_xls[0]
xls_02 = Addproject_xls[1]
xls_reponses = Addproject_xls[0][-1]
xls_reponse = json.loads(xls_reponses)
# set url
print('case ###############################################%s' %
self.case_name)
self._testMethodDoc = self.case_name
self.url = commons.get_url_from_xml('Groupsedit')
self.id_change = commons.get_parameter_from_xls(
xls_reponse, "id", None)
self.url_new = self.url + str(self.id_change)
configHttp.set_url(self.url)
print("第一步：设置url " + self.url)
# get visitor token
# if self.token == '0':
# token = localReadConfig.get_headers("token_v")
# elif self.token == '1':
# token = None
#set headers
Content_Type = localReadConfig.get_headers('Content-Type')
no_cache = localReadConfig.get_headers('Cache-Control')
header = {
"Content-Type": Content_Type,
'Authorization': Authorization_id,
'Cache-Control': no_cache
}
print('header%s ' % header)
configHttp.set_headers(header)
print("第二步：设置header等")
#從上一個接口獲取項目id，名稱
# self.itemCnName = commons.get_parameter_from_xls(xls_reponse,"cnName",None)
# self.itemEnName = commons.get_parameter_from_xls(xls_reponse,"enName",None)
# self.itemId = commons.get_parameter_from_xls(xls_reponse,"id",None)
# set params
data = {
"areaId":
self.areaId,
"cnName":
self.cnName,
"enName":
self.enName,
"groupHasBuildingOptionList": [{
"landCnName": self.landCnName,
"landEnName": self.landEnName,
"landId": self.landId
}],
"groupHasItemOptionList": [{
"itemId": self.itemId
}],
"groupHasUserOptionList": [{
"isOutsider": self.isOutsider,
"key": self.key,
"thumb": self.thumb,
"userCnName": self.userCnName,
"userEnName": self.userEnName,
"userId": self.userId
}],
"isReleased":
self.isReleased,
"studentGroupHasDepartmentList": [{
"departmentCnName": "",
"departmentEnName": "",
"departmentId": ""
}],
"teacherGroupHasDepartmentList": [{
"departmentCnName": "",
"departmentEnName": "",
"departmentId": ""
}],
"type":
self.types
}
DATE = json.dumps(data)
print('DATE%s' % DATE)
configHttp.set_data(DATE)
print("第三步：设置发送请求的参数")
self.logger.info("********creater********")
# test interface
try:
self.return_json = configHttp.post()
except Exception as e:
print('e %s' % e)
method = str(self.return_json.request
)[int(str(self.return_json.request).find('[')) +
1:int(str(self.return_json.request).find(']'))]
print("第四步：发送请求\n\t\t请求方法：" + method)
print("第五步：检查结果")
self.checkResult()
return self.return_json
def test01_Itemsupdate(self):
get_xls_Addrepair = commons.get_xls("caseforparame.xlsx", "Addproject")
try:
xls_01 = get_xls_Addrepair[0]
xls_02 = get_xls_Addrepair[1]
except:
print("超出列表值")
xls_reponses_Addrepairs = get_xls_Addrepair[0][-1]
xls_reponses_Addrepair = json.loads(xls_reponses_Addrepairs)
# set url
self._testMethodDoc = self.case_name
self.url = commons.get_url_from_xml('Itemsupdate')
self.id_change = commons.get_parameter_from_xls(xls_reponses_Addrepair, 'id', None)
self.url_new = self.url + "/" + str(self.id_change)
configHttp.set_url(self.url_new)
print("第一步：设置url "+self.url_new)
#set headers
Content_Type = localReadConfig.get_headers('Content-Type')
no_cache = localReadConfig.get_headers('Cache-Control')
header = {"Content-Type": Content_Type,'Authorization':Authorization_id,'Cache-Control':no_cache}
print('header%s ' % header )
configHttp.set_headers(header)
print("第二步：设置header等")
# set params
data = {
"cnName":self.cnName,
"enName": self.enName ,
"isApplyToStudent":self.isApplyToStudent ,
"isApplyToTeacher": self.isApplyToTeacher,
"isNeedAuditStudent": self.isNeedAuditStudent,
"isNeedAuditTeacher": self.isNeedAuditTeacher,
"isReleased": self.isReleased,
"roomTypeList": [
{
"roomTypeCnName": self.roomTypeCnName,
"roomTypeEnName": self.roomTypeEnName,
"roomTypeId": self.roomTypeId,
"roomTypeKey": self.roomTypeKey
}
],
"sn": self.sn
}
DATE = json.dumps(data)
print('DATE%s' % DATE)
configHttp.set_data(DATE)
print("第三步：设置发送请求的参数")
self.logger.info("********creater********")
# test interface
try:
self.return_json = configHttp.post()
except Exception as e:
print('e %s' % e)
method = str(self.return_json.request)[int(str(self.return_json.request).find('['))+1:int(str(self.return_json.request).find(']'))]
print("第四步：发送请求\n\t\t请求方法："+method)
print("第五步：检查结果")
self.checkResult()
return self.return_json
def test01_Approvalsdetails(self):
#依賴其他接口參數
get_xls = commons.get_xls("caseforparame.xlsx", "Addrepair")
try:
xls_01 = get_xls[0]
xls_02 = get_xls[1]
except:
print("超出列表值")
xls_reponses = get_xls[0][-1]
xls_reponse = json.loads(xls_reponses)
# set url
self._testMethodDoc = self.case_name
self.url = commons.get_url_from_xml('Approvalsdetails')
self.id_change = commons.get_parameter_from_xls(
xls_reponse, "id", None)
self.url_new = self.url + "/" + str(self.id_change)
print(self.url_new)
configHttp.set_url(self.url_new)
print("第一步：设置url " + self.url_new)
# get visitor token
# if self.token == '0':
# token = localReadConfig.get_headers("token_v")
# elif self.token == '1':
# token = None
#set headers
Content_Type = localReadConfig.get_headers('Content-Type')
no_cache = localReadConfig.get_headers('Cache-Control')
header = {
"Content-Type": "text/plain",
'Authorization': Authorization_id,
'Cache-Control': no_cache
}
print('header%s ' % header)
configHttp.set_headers(header)
print("第二步：设置header等")
# set params
# data = {
# "operation": self.operation,
# "remarks": self.remarks
# }
# DATE = json.dumps(data)
# print('DATE%s' % DATE)
# configHttp.set_data(DATE)
print("第三步：设置发送请求的参数")
self.logger.info("********creater********")
# test interface
try:
self.return_json = configHttp.get()
except Exception as e:
print('e %s' % e)
method = str(self.return_json.request
)[int(str(self.return_json.request).find('[')) +
1:int(str(self.return_json.request).find(']'))]
print("第四步：发送请求\n\t\t请求方法：" + method)
print("第五步：检查结果")
self.checkResult()
return self.return_json
def test01_Addrepair(self):
#依賴其他接口參數
# Addproject_xls = commons.get_xls("caseforparame.xlsx", "Addproject")
# xls_01 = Addproject_xls[0]
# xls_02 = Addproject_xls[1]
# xls_reponses = Addproject_xls[0][-1]
# xls_reponse = json.loads(xls_reponses)
self.xls_response = commons.get_parameter_one("Addproject",1,-1)
self.itemEnName = commons.get_parameter_from_xls(self.xls_response,"cnName",None)
self.itemCnName = commons.get_parameter_from_xls(self.xls_response, "enName", None)
self.itemId = commons.get_parameter_from_xls(self.xls_response, "id", None)
# set url
print('case ###############################################%s' % self.case_name)
self._testMethodDoc = self.case_name
self.url = commons.get_url_from_xml('Addrepair')
configHttp.set_url(self.url)
print("第一步：设置url "+self.url)
# get visitor token
# if self.token == '0':
# token = localReadConfig.get_headers("token_v")
# elif self.token == '1':
# token = None
#set headers
Content_Type = localReadConfig.get_headers('Content-Type')
no_cache = localReadConfig.get_headers('Cache-Control')
header = {"Content-Type": Content_Type,'Authorization':Authorization_id,'Cache-Control':no_cache}
print('header%s ' % header )
configHttp.set_headers(header)
print("第二步：设置header等")
#從上一個接口獲取項目id，名稱
# self.itemCnName = commons.get_parameter_from_xls(xls_reponse,"cnName",None)
# self.itemEnName = commons.get_parameter_from_xls(xls_reponse,"enName",None)
# self.itemId = commons.get_parameter_from_xls(xls_reponse,"id",None)
# set params
data = {
"addr": self.addr,
"attachmentIds": [self.attachmentIds],
"id": self.id_change,
"itemCnName": self.itemCnName,
"itemEnName": self.itemEnName,
"itemId": self.itemId,
"landCnName": self.landCnName,
"landEnName": self.landEnName,
"landId": self.landId,
"remark": self.remark,
"roomCnName": self.roomCnName,
"roomEnName": self.roomEnName,
"roomId": self.roomId,
"roomTypeKey": self.roomTypeKey,
"tel": self.tel
}
DATE = json.dumps(data)
print('DATE%s' % DATE)
configHttp.set_data(DATE)
print("第三步：设置发送请求的参数")
self.logger.info("********creater********")
# test interface
try:
self.return_json = configHttp.post()
except Exception as e:
print('e %s' % e)
method = str(self.return_json.request)[int(str(self.return_json.request).find('['))+1:int(str(self.return_json.request).find(']'))]
print("第四步：发送请求\n\t\t请求方法："+method)
print("第五步：检查结果")
self.checkResult()
return self.return_json
def test01_Groupsgetdelete(self):
# set url
xls_reponses = commons.Deposit_xls_relyon("caseforparame.xlsx",
"Groupsgetdelete",
"AddGroups", self.case_name)
xls_reponse = json.loads(xls_reponses)
self._testMethodDoc = self.case_name
self.url = commons.get_url_from_xml('Groupsgetdelete')
self.url_new = self.url.split("/")
self.id_change = commons.get_parameter_from_xls(
xls_reponse, 'id', None)
self.url_last = "/" + self.url_new[1] + "/" + str(
self.id_change) + "/" + self.url_new[2]
configHttp.set_url(self.url_last)
print("第一步：设置url " + self.url_last)
# get visitor token
# if self.token == '0':
# token = localReadConfig.get_headers("token_v")
# elif self.token == '1':
# token = None
#set headers
Content_Type = localReadConfig.get_headers('Content-Type')
no_cache = localReadConfig.get_headers('Cache-Control')
header = {
"Content-Type": Content_Type,
'Authorization': Authorization_id,
'Cache-Control': no_cache
}
print('header%s ' % header)
configHttp.set_headers(header)
print("第二步：设置header等")
# set params
# data = {
# "attachmentIds":[self.attachmentIds],
# "costPrice":self.costPrice,
# "remarks": self.remarks
# }
# DATE = json.dumps(data)
# print('DATE%s' % DATE)
#
# configHttp.set_data(DATE)
print("第三步：设置发送请求的参数")
self.logger.info("********creater********")
try:
self.return_json = configHttp.post()
except Exception as e:
print('e %s' % e)
method = str(self.return_json.request
)[int(str(self.return_json.request).find('[')) +
1:int(str(self.return_json.request).find(']'))]
print("第四步：发送请求\n\t\t请求方法：" + method)
print("第五步：检查结果")
self.checkResult()
return self.return_json
