def thermald_thread():
# prevent LEECO from undervoltage
BATT_PERC_OFF = 100 #10 if LEON else 3
health_timeout = int(1000 * 2.5 * DT_TRML) # 2.5x the expected health frequency
# now loop
thermal_sock = messaging.pub_sock('thermal')
health_sock = messaging.sub_sock('health', timeout=health_timeout)
location_sock = messaging.sub_sock('gpsLocation')
ignition = False
fan_speed = 0
count = 0
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
thermal_status_prev = ThermalStatus.green
usb_power = True
usb_power_prev = True
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
health_prev = None
fw_version_match_prev = True
time_valid_prev = True
should_start_prev = False
handle_fan = None
is_uno = False
has_relay = False
params = Params()
pm = PowerMonitoring()
no_panda_cnt = 0
IsOpenpilotViewEnabled = 0
do_uninstall = 0
accepted_terms = 0
completed_training = 0
panda_signature = 0
ts_last_ip = 0
ip_addr = '255.255.255.255'
# sound trigger
sound_trigger = 1
env = dict(os.environ)
env['LD_LIBRARY_PATH'] = mediaplayer
getoff_alert = Params().get('OpkrEnableGetoffAlert') == b'1'
OpkrAutoShutdown = params.get_OpkrAutoShutdown()
while 1:
ts = sec_since_boot()
health = messaging.recv_sock(health_sock, wait=True)
location = messaging.recv_sock(location_sock)
location = location.gpsLocation if location else None
msg = read_thermal()
if health is not None:
usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client
# If we lose connection to the panda, wait 5 seconds before going offroad
if health.health.hwType == log.HealthData.HwType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if ignition:
cloudlog.error("Lost panda connection while onroad")
ignition = False
else:
no_panda_cnt = 0
ignition = health.health.ignitionLine or health.health.ignitionCan
# Setup fan handler on first connect to panda
if handle_fan is None and health.health.hwType != log.HealthData.HwType.unknown:
is_uno = health.health.hwType == log.HealthData.HwType.uno
has_relay = health.health.hwType in [log.HealthData.HwType.blackPanda, log.HealthData.HwType.uno, log.HealthData.HwType.dos]
if is_uno or not ANDROID:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if health_prev is not None:
if health.health.hwType == log.HealthData.HwType.unknown and \
health_prev.health.hwType != log.HealthData.HwType.unknown:
params.panda_disconnect()
health_prev = health
elif ignition == False or IsOpenpilotViewEnabled:
IsOpenpilotViewEnabled = int( params.get("IsOpenpilotViewEnabled") )
ignition = IsOpenpilotViewEnabled
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = get_network_type()
network_strength = get_network_strength(network_type)
except Exception:
cloudlog.exception("Error getting network status")
msg.thermal.freeSpace = get_available_percent(default=100.0) / 100.0
msg.thermal.memUsedPercent = int(round(psutil.virtual_memory().percent))
msg.thermal.cpuPerc = int(round(psutil.cpu_percent()))
msg.thermal.networkType = network_type
msg.thermal.networkStrength = network_strength
msg.thermal.batteryPercent = get_battery_capacity()
msg.thermal.batteryStatus = get_battery_status()
msg.thermal.batteryCurrent = get_battery_current()
msg.thermal.batteryVoltage = get_battery_voltage()
msg.thermal.usbOnline = get_usb_present()
# Fake battery levels on uno for frame
if is_uno:
msg.thermal.batteryPercent = 100
msg.thermal.batteryStatus = "Charging"
# update ip every 10 seconds
ts = sec_since_boot()
if ts - ts_last_ip >= 10.:
try:
result = subprocess.check_output(["ifconfig", "wlan0"], encoding='utf8') # pylint: disable=unexpected-keyword-arg
ip_addr = re.findall(r"inet addr:((\d+\.){3}\d+)", result)[0][0]
except:
ip_addr = 'N/A'
ts_last_ip = ts
msg.thermal.ipAddr = ip_addr
current_filter.update(msg.thermal.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = cpu_temp_filter.update(
max(msg.thermal.cpu0,
msg.thermal.cpu1,
msg.thermal.cpu2,
msg.thermal.cpu3) / 10.0)
max_comp_temp = max(max_cpu_temp, msg.thermal.mem / 10., msg.thermal.gpu / 10.)
bat_temp = msg.thermal.bat / 1000.
if handle_fan is not None:
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed, ignition)
msg.thermal.fanSpeed = fan_speed
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
# We only do this if there is a relay that prevents the car from faulting
if max_cpu_temp > 107. or bat_temp >= 63. or (has_relay and (started_ts is None) and max_cpu_temp > 70.0):
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 96.0 or bat_temp > 60.:
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red, ThermalStatus.danger)
elif max_cpu_temp > 94.0:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow, ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green, ThermalStatus.yellow)
else:
# all good
thermal_status = ThermalStatus.green
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
time_valid = now.year >= 2019
if time_valid and not time_valid_prev:
params.delete("Offroad_InvalidTime")
if not time_valid and time_valid_prev:
put_nonblocking("Offroad_InvalidTime", json.dumps(OFFROAD_ALERTS["Offroad_InvalidTime"]))
time_valid_prev = time_valid
# Show update prompt
"""
try:
last_update = datetime.datetime.fromisoformat(params.get("LastUpdateTime", encoding='utf8'))
except (TypeError, ValueError):
last_update = now
dt = now - last_update
update_failed_count = params.get("UpdateFailedCount")
update_failed_count = 0 if update_failed_count is None else int(update_failed_count)
if dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
if current_connectivity_alert != "expired":
current_connectivity_alert = "expired"
params.delete("Offroad_ConnectivityNeededPrompt")
put_nonblocking("Offroad_ConnectivityNeeded", json.dumps(OFFROAD_ALERTS["Offroad_ConnectivityNeeded"]))
elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
if current_connectivity_alert != "prompt" + remaining_time:
current_connectivity_alert = "prompt" + remaining_time
alert_connectivity_prompt = copy.copy(OFFROAD_ALERTS["Offroad_ConnectivityNeededPrompt"])
alert_connectivity_prompt["text"] += remaining_time + " days."
params.delete("Offroad_ConnectivityNeeded")
put_nonblocking("Offroad_ConnectivityNeededPrompt", json.dumps(alert_connectivity_prompt))
elif current_connectivity_alert is not None:
current_connectivity_alert = None
params.delete("Offroad_ConnectivityNeeded")
params.delete("Offroad_ConnectivityNeededPrompt")
"""
do_uninstall = params.get("DoUninstall") == b"1"
accepted_terms = params.get("HasAcceptedTerms") == terms_version
completed_training = params.get("CompletedTrainingVersion") == training_version
panda_signature = params.get("PandaFirmware")
fw_version_match = (panda_signature is None) or (panda_signature == FW_SIGNATURE) # don't show alert is no panda is connected (None)
should_start = ignition
# with 2% left, we killall, otherwise the phone will take a long time to boot
should_start = should_start and msg.thermal.freeSpace > 0.02
# confirm we have completed training and aren't uninstalling
should_start = should_start and accepted_terms and completed_training and (not do_uninstall)
# check for firmware mismatch
should_start = should_start and fw_version_match
# check if system time is valid
should_start = should_start and time_valid
# don't start while taking snapshot
if not should_start_prev:
is_viewing_driver = params.get("IsDriverViewEnabled") == b"1"
is_taking_snapshot = params.get("IsTakingSnapshot") == b"1"
should_start = should_start and (not is_taking_snapshot) and (not is_viewing_driver)
if fw_version_match and not fw_version_match_prev:
params.delete("Offroad_PandaFirmwareMismatch")
if not fw_version_match and fw_version_match_prev:
put_nonblocking("Offroad_PandaFirmwareMismatch", json.dumps(OFFROAD_ALERTS["Offroad_PandaFirmwareMismatch"]))
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
if thermal_status >= ThermalStatus.danger:
should_start = False
if thermal_status_prev < ThermalStatus.danger:
put_nonblocking("Offroad_TemperatureTooHigh", json.dumps(OFFROAD_ALERTS["Offroad_TemperatureTooHigh"]))
else:
if thermal_status_prev >= ThermalStatus.danger:
params.delete("Offroad_TemperatureTooHigh")
if should_start:
if not should_start_prev:
params.delete("IsOffroad")
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
os.system('echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor')
else:
if should_start_prev or (count == 0):
put_nonblocking("IsOffroad", "1")
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
os.system('echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor')
if sound_trigger == 1 and msg.thermal.batteryStatus == "Discharging" and started_seen and (sec_since_boot() - off_ts) > 1 and getoff_alert:
subprocess.Popen([mediaplayer + 'mediaplayer', '/data/openpilot/selfdrive/assets/sounds/eondetach.wav'], shell = False, stdin=None, stdout=None, stderr=None, env = env, close_fds=True)
sound_trigger = 0
# shutdown if the battery gets lower than 3%, it's discharging, we aren't running for
# more than a minute but we were running
if msg.thermal.batteryPercent <= BATT_PERC_OFF and msg.thermal.batteryStatus == "Discharging" and \
started_seen and OpkrAutoShutdown and (sec_since_boot() - off_ts) > OpkrAutoShutdown:
os.system('LD_LIBRARY_PATH="" svc power shutdown')
prebuiltlet = Params().get('PutPrebuiltOn') == b'1'
if not os.path.isfile(prebuiltfile) and prebuiltlet:
os.system("cd /data/openpilot; touch prebuilt")
elif os.path.isfile(prebuiltfile) and not prebuiltlet:
os.system("cd /data/openpilot; rm -f prebuilt")
# Offroad power monitoring
pm.calculate(health, msg)
msg.thermal.offroadPowerUsage = pm.get_power_used()
msg.thermal.chargingError = current_filter.x > 0. and msg.thermal.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.thermal.started = started_ts is not None
msg.thermal.startedTs = int(1e9*(started_ts or 0))
msg.thermal.thermalStatus = thermal_status
thermal_sock.send(msg.to_bytes())
if usb_power_prev and not usb_power:
put_nonblocking("Offroad_ChargeDisabled", json.dumps(OFFROAD_ALERTS["Offroad_ChargeDisabled"]))
elif usb_power and not usb_power_prev:
params.delete("Offroad_ChargeDisabled")
thermal_status_prev = thermal_status
usb_power_prev = usb_power
fw_version_match_prev = fw_version_match
should_start_prev = should_start
if usb_power:
pm.charging_ctrl( msg, ts, 80, 70 )
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
cloudlog.event("STATUS_PACKET",
count=count,
health=(health.to_dict() if health else None),
location=(location.to_dict() if location else None),
thermal=msg.to_dict())
count += 1
def thermald_thread():
# prevent LEECO from undervoltage
BATT_PERC_OFF = 90 #10 if LEON else 3
health_timeout = int(1000 * 2.5 *
DT_TRML) # 2.5x the expected health frequency
# now loop
thermal_sock = messaging.pub_sock('thermal')
health_sock = messaging.sub_sock('health', timeout=health_timeout)
location_sock = messaging.sub_sock('gpsLocation')
ignition = False
fan_speed = 0
count = 0
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
thermal_status_prev = ThermalStatus.green
usb_power = True
usb_power_prev = True
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
health_prev = None
fw_version_match_prev = True
current_connectivity_alert = None
time_valid_prev = True
should_start_prev = False
handle_fan = None
is_uno = False
params = Params()
pm = PowerMonitoring()
no_panda_cnt = 0
IsOpenpilotViewEnabled = 0
OpkrLoadStep = 0
OpkrAutoShutdown = 0
do_uninstall = 0
accepted_terms = 0
completed_training = 0
panda_signature = 0
while 1:
OpkrLoadStep += 1
if OpkrLoadStep == 1:
OpkrAutoShutdown = params.get_OpkrAutoShutdown()
elif OpkrLoadStep == 2:
do_uninstall = params.get("DoUninstall") == b"1"
elif OpkrLoadStep == 3:
accepted_terms = params.get("HasAcceptedTerms") == terms_version
elif OpkrLoadStep == 4:
completed_training = params.get(
"CompletedTrainingVersion") == training_version
elif OpkrLoadStep == 5:
panda_signature = params.get("PandaFirmware")
else:
OpkrLoadStep = 0
ts = sec_since_boot()
health = messaging.recv_sock(health_sock, wait=True)
location = messaging.recv_sock(location_sock)
location = location.gpsLocation if location else None
msg = read_thermal()
if health is not None:
usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client
# If we lose connection to the panda, wait 5 seconds before going offroad
if health.health.hwType == log.HealthData.HwType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if ignition:
cloudlog.error("Lost panda connection while onroad")
ignition = False
else:
no_panda_cnt = 0
ignition = health.health.ignitionLine or health.health.ignitionCan
# Setup fan handler on first connect to panda
if handle_fan is None and health.health.hwType != log.HealthData.HwType.unknown:
is_uno = health.health.hwType == log.HealthData.HwType.uno
if is_uno or not ANDROID:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if health_prev is not None:
if health.health.hwType == log.HealthData.HwType.unknown and \
health_prev.health.hwType != log.HealthData.HwType.unknown:
params.panda_disconnect()
health_prev = health
elif ignition == False or IsOpenpilotViewEnabled:
IsOpenpilotViewEnabled = int(params.get("IsOpenpilotViewEnabled"))
ignition = IsOpenpilotViewEnabled
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = get_network_type()
network_strength = get_network_strength(network_type)
except Exception:
cloudlog.exception("Error getting network status")
msg.thermal.freeSpace = get_available_percent(default=100.0) / 100.0
msg.thermal.memUsedPercent = int(round(
psutil.virtual_memory().percent))
msg.thermal.cpuPerc = int(round(psutil.cpu_percent()))
msg.thermal.networkType = network_type
msg.thermal.networkStrength = network_strength
msg.thermal.batteryPercent = get_battery_capacity()
msg.thermal.batteryStatus = get_battery_status()
msg.thermal.batteryCurrent = get_battery_current()
msg.thermal.batteryVoltage = get_battery_voltage()
msg.thermal.usbOnline = get_usb_present()
# Fake battery levels on uno for frame
if is_uno:
msg.thermal.batteryPercent = 100
msg.thermal.batteryStatus = "Charging"
current_filter.update(msg.thermal.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = cpu_temp_filter.update(
max(msg.thermal.cpu0, msg.thermal.cpu1, msg.thermal.cpu2,
msg.thermal.cpu3) / 10.0)
max_comp_temp = max(max_cpu_temp, msg.thermal.mem / 10.,
msg.thermal.gpu / 10.)
bat_temp = msg.thermal.bat / 1000.
if handle_fan is not None:
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed, ignition)
msg.thermal.fanSpeed = fan_speed
# thermal logic with hysterisis
if max_cpu_temp > 107. or bat_temp >= 63.:
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 92.5 or bat_temp > 60.: # CPU throttling starts around ~90C
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red,
ThermalStatus.danger)
elif max_cpu_temp > 87.5:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow,
ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green,
ThermalStatus.yellow)
else:
# all good
thermal_status = ThermalStatus.green
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
time_valid = now.year >= 2019
if time_valid and not time_valid_prev:
params.delete("Offroad_InvalidTime")
if not time_valid and time_valid_prev:
put_nonblocking("Offroad_InvalidTime",
json.dumps(OFFROAD_ALERTS["Offroad_InvalidTime"]))
time_valid_prev = time_valid
# Show update prompt
"""
try:
last_update = datetime.datetime.fromisoformat(params.get("LastUpdateTime", encoding='utf8'))
except (TypeError, ValueError):
last_update = now
dt = now - last_update
update_failed_count = params.get("UpdateFailedCount")
update_failed_count = 0 if update_failed_count is None else int(update_failed_count)
if dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
if current_connectivity_alert != "expired":
current_connectivity_alert = "expired"
params.delete("Offroad_ConnectivityNeededPrompt")
put_nonblocking("Offroad_ConnectivityNeeded", json.dumps(OFFROAD_ALERTS["Offroad_ConnectivityNeeded"]))
elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
if current_connectivity_alert != "prompt" + remaining_time:
current_connectivity_alert = "prompt" + remaining_time
alert_connectivity_prompt = copy.copy(OFFROAD_ALERTS["Offroad_ConnectivityNeededPrompt"])
alert_connectivity_prompt["text"] += remaining_time + " days."
params.delete("Offroad_ConnectivityNeeded")
put_nonblocking("Offroad_ConnectivityNeededPrompt", json.dumps(alert_connectivity_prompt))
elif current_connectivity_alert is not None:
current_connectivity_alert = None
params.delete("Offroad_ConnectivityNeeded")
params.delete("Offroad_ConnectivityNeededPrompt")
"""
#accepted_terms = params.get("HasAcceptedTerms") == terms_version
#completed_training = params.get("CompletedTrainingVersion") == training_version
#panda_signature = params.get("PandaFirmware")
fw_version_match = (panda_signature is None) or (
panda_signature == FW_SIGNATURE
) # don't show alert is no panda is connected (None)
#ignition = True # 영상보기.
should_start = ignition
# with 2% left, we killall, otherwise the phone will take a long time to boot
should_start = should_start and msg.thermal.freeSpace > 0.02
# confirm we have completed training and aren't uninstalling
should_start = should_start and accepted_terms and completed_training and (
not do_uninstall)
# check for firmware mismatch
should_start = should_start and fw_version_match
# check if system time is valid
should_start = should_start and time_valid
# don't start while taking snapshot
if not should_start_prev:
is_viewing_driver = params.get("IsDriverViewEnabled") == b"1"
is_taking_snapshot = params.get("IsTakingSnapshot") == b"1"
should_start = should_start and (not is_taking_snapshot) and (
not is_viewing_driver)
if fw_version_match and not fw_version_match_prev:
params.delete("Offroad_PandaFirmwareMismatch")
if not fw_version_match and fw_version_match_prev:
put_nonblocking(
"Offroad_PandaFirmwareMismatch",
json.dumps(OFFROAD_ALERTS["Offroad_PandaFirmwareMismatch"]))
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
if thermal_status >= ThermalStatus.danger:
should_start = False
if thermal_status_prev < ThermalStatus.danger:
put_nonblocking(
"Offroad_TemperatureTooHigh",
json.dumps(OFFROAD_ALERTS["Offroad_TemperatureTooHigh"]))
else:
if thermal_status_prev >= ThermalStatus.danger:
params.delete("Offroad_TemperatureTooHigh")
current_ts = sec_since_boot()
if should_start:
if not should_start_prev:
params.delete("IsOffroad")
off_ts = None
if started_ts is None:
started_ts = current_ts
started_seen = True
os.system(
'echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor'
)
else:
if should_start_prev or (count == 0):
put_nonblocking("IsOffroad", "1")
started_ts = None
if off_ts is None:
off_ts = current_ts
os.system(
'echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor'
)
# shutdown if the battery gets lower than 3%, it's discharging, we aren't running for
# more than a minute but we were running
power_shutdown = False
if msg.thermal.batteryStatus == "Discharging":
delta_ts = current_ts - off_ts
if started_seen:
if msg.thermal.batteryPercent <= BATT_PERC_OFF and (
OpkrAutoShutdown and delta_ts > OpkrAutoShutdown):
power_shutdown = True
elif delta_ts > 240 and msg.thermal.batteryPercent < 10:
power_shutdown = True
if power_shutdown:
os.system('LD_LIBRARY_PATH="" svc power shutdown')
print('power_shutdown batterypercent={} should_start={}'.
format(msg.thermal.batteryPercent, should_start))
else:
off_ts = current_ts
#print( 'OpkrAutoShutdown = {}'.format( OpkrAutoShutdown ) )
#if msg.thermal.batteryPercent < BATT_PERC_OFF and msg.thermal.batteryStatus == "Discharging" and \
# started_seen and (current_ts - off_ts) > 60:
# os.system('LD_LIBRARY_PATH="" svc power shutdown')
# print( 'batterypercent={} should_start={}'.format(msg.thermal.batteryPercent, should_start) )
# Offroad power monitoring
pm.calculate(health, msg)
msg.thermal.offroadPowerUsage = pm.get_power_used()
msg.thermal.chargingError = current_filter.x > 0. and msg.thermal.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.thermal.started = started_ts is not None
msg.thermal.startedTs = int(1e9 * (started_ts or 0))
msg.thermal.thermalStatus = thermal_status
thermal_sock.send(msg.to_bytes())
if usb_power_prev and not usb_power:
put_nonblocking(
"Offroad_ChargeDisabled",
json.dumps(OFFROAD_ALERTS["Offroad_ChargeDisabled"]))
elif usb_power and not usb_power_prev:
params.delete("Offroad_ChargeDisabled")
thermal_status_prev = thermal_status
usb_power_prev = usb_power
fw_version_match_prev = fw_version_match
should_start_prev = should_start
if usb_power:
pm.charging_ctrl(msg, ts, 60, 40)
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
cloudlog.event("STATUS_PACKET",
count=count,
health=(health.to_dict() if health else None),
location=(location.to_dict() if location else None),
thermal=msg.to_dict())
count += 1
