def test_policy_modify_vn_policy(self):
""" Configure policies based on topology;
"""
###
# Get config for test from topology
# very simple topo will do, one vn, one vm, one policy, 3 rules
topology_class_name = sdn_single_vm_policy_topology.sdn_single_vm_policy_config
self.logger.info("Scenario for the test used is: %s" %
(topology_class_name))
# set project name
try:
# provided by wrapper module if run in parallel test env
topo = topology_class_name(project=self.project.project_name,
username=self.project.username,
password=self.project.password)
except NameError:
topo = topology_class_name()
###
# Test setup: Configure policy, VN, & VM
# return {'result':result, 'msg': err_msg, 'data': [self.topo, config_topo]}
# Returned topo is of following format:
# config_topo= {'policy': policy_fixt, 'vn': vn_fixture, 'vm': vm_fixture}
setup_obj = self.useFixture(sdnTopoSetupFixture(
self.connections, topo))
out = setup_obj.topo_setup()
assertEqual(out['result'], True, out['msg'])
if out['result']:
topo, config_topo = out['data']
###
# Verify [and assert on fail] after setup
# Calling system policy verification, pick any policy fixture to
# access fixture verification
policy_name = topo.policy_list[0]
system_vna_verify_policy(self, config_topo['policy'][policy_name],
topo, 'setup')
###
# Test procedure:
# Test adding new policy to VN's exiting policy list
state = "add policy: "
test_vm = topo.vmc_list[0]
test_vn = topo.vn_of_vm[test_vm]
# Init test data, take backup of current topology
initial_vn_policy_list = copy.copy(topo.vn_policy[test_vn])
new_policy_to_add = policy_test_utils.get_policy_not_in_vn(
initial_vn_policy_list, topo.policy_list)
if not new_policy_to_add:
result = 'False'
msg = "test %s cannot be run as required config not available in topology; aborting test"
self.logger.info(msg)
assertEqual(result, True, msg)
initial_policy_vn_list = copy.copy(topo.policy_vn[new_policy_to_add])
new_vn_policy_list = copy.copy(initial_vn_policy_list)
new_policy_vn_list = copy.copy(initial_policy_vn_list)
new_vn_policy_list.append(new_policy_to_add)
new_policy_vn_list.append(test_vn)
test_vn_fix = config_topo['vn'][test_vn]
test_vn_id = test_vn_fix.vn_id
# configure new policy
config_topo['policy'][new_policy_to_add] = self.useFixture(
PolicyFixture(policy_name=new_policy_to_add,
rules_list=topo.rules[new_policy_to_add],
inputs=self.inputs,
connections=self.connections))
# get new policy_set to be pushed for the vn
test_policy_fq_names = []
for policy in new_vn_policy_list:
name = config_topo['policy'][policy].policy_fq_name
test_policy_fq_names.append(name)
self.logger.info("adding policy %s to vn %s" %
(new_policy_to_add, test_vn))
test_vn_fix.bind_policies(test_policy_fq_names, test_vn_id)
# wait for tables update before checking after making changes to system
time.sleep(5)
self.logger.info("New policy list of VN %s is %s" %
(test_vn, new_vn_policy_list))
# update expected topology with this new info for verification
topo.vn_policy[test_vn] = new_vn_policy_list
topo.policy_vn[new_policy_to_add] = new_policy_vn_list
system_vna_verify_policy(self,
config_topo['policy'][new_policy_to_add],
topo, state)
# Test unbinding all policies from VN
state = "unbinding all policies"
test_vn_fix.unbind_policies(test_vn_id)
# wait for tables update before checking after making changes to system
time.sleep(5)
current_vn_policy_list = new_vn_policy_list
new_vn_policy_list = []
self.logger.info("New policy list of VN %s is %s" %
(test_vn, new_vn_policy_list))
# update expected topology with this new info for verification
topo.vn_policy[test_vn] = new_vn_policy_list
for policy in current_vn_policy_list:
topo.policy_vn[policy].remove(test_vn)
system_vna_verify_policy(self,
config_topo['policy'][new_policy_to_add],
topo, state)
return True
def test_policy_modify_vn_policy(self):
""" Configure policies based on topology;
"""
###
# Get config for test from topology
# very simple topo will do, one vn, one vm, one policy, 3 rules
topology_class_name = sdn_single_vm_policy_topology.sdn_single_vm_policy_config
self.logger.info("Scenario for the test used is: %s" % (topology_class_name))
# set project name
try:
# provided by wrapper module if run in parallel test env
topo = topology_class_name(
project=self.project.project_name, username=self.project.username, password=self.project.password
)
except NameError:
topo = topology_class_name()
###
# Test setup: Configure policy, VN, & VM
# return {'result':result, 'msg': err_msg, 'data': [self.topo, config_topo]}
# Returned topo is of following format:
# config_topo= {'policy': policy_fixt, 'vn': vn_fixture, 'vm': vm_fixture}
setup_obj = self.useFixture(sdnTopoSetupFixture(self.connections, topo))
out = setup_obj.topo_setup()
assertEqual(out["result"], True, out["msg"])
if out["result"]:
topo, config_topo = out["data"]
###
# Verify [and assert on fail] after setup
# Calling system policy verification, pick any policy fixture to
# access fixture verification
policy_name = topo.policy_list[0]
system_vna_verify_policy(self, config_topo["policy"][policy_name], topo, "setup")
###
# Test procedure:
# Test adding new policy to VN's exiting policy list
state = "add policy: "
test_vm = topo.vmc_list[0]
test_vn = topo.vn_of_vm[test_vm]
# Init test data, take backup of current topology
initial_vn_policy_list = copy.copy(topo.vn_policy[test_vn])
new_policy_to_add = policy_test_utils.get_policy_not_in_vn(initial_vn_policy_list, topo.policy_list)
if not new_policy_to_add:
result = "False"
msg = "test %s cannot be run as required config not available in topology; aborting test"
self.logger.info(msg)
assertEqual(result, True, msg)
initial_policy_vn_list = copy.copy(topo.policy_vn[new_policy_to_add])
new_vn_policy_list = copy.copy(initial_vn_policy_list)
new_policy_vn_list = copy.copy(initial_policy_vn_list)
new_vn_policy_list.append(new_policy_to_add)
new_policy_vn_list.append(test_vn)
test_vn_fix = config_topo["vn"][test_vn]
test_vn_id = test_vn_fix.vn_id
# configure new policy
config_topo["policy"][new_policy_to_add] = self.useFixture(
PolicyFixture(
policy_name=new_policy_to_add,
rules_list=topo.rules[new_policy_to_add],
inputs=self.inputs,
connections=self.connections,
)
)
# get new policy_set to be pushed for the vn
test_policy_fq_names = []
for policy in new_vn_policy_list:
name = config_topo["policy"][policy].policy_fq_name
test_policy_fq_names.append(name)
self.logger.info("adding policy %s to vn %s" % (new_policy_to_add, test_vn))
test_vn_fix.bind_policies(test_policy_fq_names, test_vn_id)
# wait for tables update before checking after making changes to system
time.sleep(5)
self.logger.info("New policy list of VN %s is %s" % (test_vn, new_vn_policy_list))
# update expected topology with this new info for verification
topo.vn_policy[test_vn] = new_vn_policy_list
topo.policy_vn[new_policy_to_add] = new_policy_vn_list
system_vna_verify_policy(self, config_topo["policy"][new_policy_to_add], topo, state)
# Test unbinding all policies from VN
state = "unbinding all policies"
test_vn_fix.unbind_policies(test_vn_id)
# wait for tables update before checking after making changes to system
time.sleep(5)
current_vn_policy_list = new_vn_policy_list
new_vn_policy_list = []
self.logger.info("New policy list of VN %s is %s" % (test_vn, new_vn_policy_list))
# update expected topology with this new info for verification
topo.vn_policy[test_vn] = new_vn_policy_list
for policy in current_vn_policy_list:
topo.policy_vn[policy].remove(test_vn)
system_vna_verify_policy(self, config_topo["policy"][new_policy_to_add], topo, state)
return True
