def pipeline_from_parsed_args(options, paired, pair_filter_mode,
is_interleaved_output):
"""
Setup a processing pipeline from parsed command-line options.
If there are any problems parsing the arguments, a CommandLineError is thrown.
Return an instance of Pipeline (SingleEndPipeline or PairedEndPipeline)
"""
if not paired:
if options.untrimmed_paired_output:
raise CommandLineError(
"Option --untrimmed-paired-output can only be used when "
"trimming paired-end reads (with option -p).")
if paired:
if not is_interleaved_output:
if not options.paired_output:
raise CommandLineError(
"When paired-end trimming is enabled via -A/-G/-B/-U, "
"a second output file needs to be specified via -p (--paired-output)."
)
if not options.output:
raise CommandLineError(
"When you use -p or --paired-output, you must also "
"use the -o option.")
if bool(options.untrimmed_output) != bool(
options.untrimmed_paired_output):
raise CommandLineError(
"When trimming paired-end reads, you must use either none "
"or both of the --untrimmed-output/--untrimmed-paired-output options."
)
if options.too_short_output and not options.too_short_paired_output:
raise CommandLineError(
"When using --too-short-output with paired-end "
"reads, you also need to use --too-short-paired-output")
if options.too_long_output and not options.too_long_paired_output:
raise CommandLineError(
"When using --too-long-output with paired-end "
"reads, you also need to use --too-long-paired-output")
if options.format is not None and options.format.lower() not in [
'fasta', 'fastq'
]:
raise CommandLineError(
"The input file format must be 'fasta' or 'fastq', "
"not '{}'.".format(options.format))
if not (0 <= options.error_rate <= 1.):
raise CommandLineError(
"The maximum error rate must be between 0 and 1.")
if options.overlap < 1:
raise CommandLineError("The overlap must be at least 1.")
if not (0 <= options.gc_content <= 100):
raise CommandLineError(
"GC content must be given as percentage between 0 and 100")
if options.action == 'none':
options.action = None
adapter_parser = AdapterParser(
max_error_rate=options.error_rate,
min_overlap=options.overlap,
read_wildcards=options.match_read_wildcards,
adapter_wildcards=options.match_adapter_wildcards,
indels=options.indels)
try:
adapters = adapter_parser.parse_multi(options.adapters,
options.anywhere, options.front)
adapters2 = adapter_parser.parse_multi(options.adapters2,
options.anywhere2,
options.front2)
except IOError as e:
if e.errno == errno.ENOENT:
raise CommandLineError(e)
raise
except ValueError as e:
raise CommandLineError(e)
if options.debug:
for adapter in adapters + adapters2:
adapter.enable_debug()
# Create the processing pipeline.
# If no second-read adapters were given (via -A/-G/-B/-U), we need to
# be backwards compatible and *no modifications* are done to the second read.
if paired:
pipeline = PairedEndPipeline(pair_filter_mode,
modify_first_read_only=paired == 'first')
else:
pipeline = SingleEndPipeline()
if options.cut:
if len(options.cut) > 2:
raise CommandLineError(
"You cannot remove bases from more than two ends.")
if len(options.cut) == 2 and options.cut[0] * options.cut[1] > 0:
raise CommandLineError(
"You cannot remove bases from the same end twice.")
for cut in options.cut:
if cut != 0:
pipeline.add1(UnconditionalCutter(cut))
if options.cut2:
if len(options.cut2) > 2:
raise CommandLineError(
"You cannot remove bases from more than two ends.")
if len(options.cut2) == 2 and options.cut2[0] * options.cut2[1] > 0:
raise CommandLineError(
"You cannot remove bases from the same end twice.")
for cut in options.cut2:
if cut != 0:
pipeline.add2(UnconditionalCutter(cut))
if options.nextseq_trim is not None:
pipeline.add(
NextseqQualityTrimmer(options.nextseq_trim, options.quality_base))
if options.quality_cutoff is not None:
cutoffs = parse_cutoffs(options.quality_cutoff)
pipeline.add(
QualityTrimmer(cutoffs[0], cutoffs[1], options.quality_base))
if adapters:
adapter_cutter = AdapterCutter(adapters, options.times, options.action)
pipeline.add1(adapter_cutter)
if adapters2:
adapter_cutter2 = AdapterCutter(adapters2, options.times,
options.action)
pipeline.add2(adapter_cutter2)
# Modifiers that apply to both reads of paired-end reads unless in legacy mode
if options.length is not None:
pipeline.add(Shortener(options.length))
if options.trim_n:
pipeline.add(NEndTrimmer())
if options.length_tag:
pipeline.add(LengthTagModifier(options.length_tag))
for suffix in options.strip_suffix:
pipeline.add(SuffixRemover(suffix))
if options.prefix or options.suffix:
pipeline.add(PrefixSuffixAdder(options.prefix, options.suffix))
if options.zero_cap:
pipeline.add(ZeroCapper(quality_base=options.quality_base))
# Set filtering parameters
# Minimum/maximum length
for attr in 'minimum_length', 'maximum_length':
param = getattr(options, attr)
if param is not None:
lengths = parse_lengths(param)
if not paired and len(lengths) == 2:
raise CommandLineError(
'Two minimum or maximum lengths given for single-end data')
if paired and len(lengths) == 1:
lengths = (lengths[0], lengths[0])
setattr(pipeline, attr, lengths)
pipeline.max_n = options.max_n
pipeline.discard_casava = options.discard_casava
pipeline.discard_trimmed = options.discard_trimmed
pipeline.discard_untrimmed = options.discard_untrimmed
return pipeline
def pipeline_from_parsed_args(options, paired, pair_filter_mode,
quality_filename, is_interleaved_output):
"""
Setup a processing pipeline from parsed command-line options.
If there are any problems parsing the arguments, a CommandlineError is thrown.
Return an instance of Pipeline (SingleEndPipeline or PairedEndPipeline)
"""
if not paired:
if options.untrimmed_paired_output:
raise CommandlineError(
"Option --untrimmed-paired-output can only be used when "
"trimming paired-end reads (with option -p).")
if paired:
if not is_interleaved_output:
if not options.paired_output:
raise CommandlineError(
"When paired-end trimming is enabled via -A/-G/-B/-U, "
"a second output file needs to be specified via -p (--paired-output)."
)
if not options.output:
raise CommandlineError(
"When you use -p or --paired-output, you must also "
"use the -o option.")
if bool(options.untrimmed_output) != bool(
options.untrimmed_paired_output):
raise CommandlineError(
"When trimming paired-end reads, you must use either none "
"or both of the --untrimmed-output/--untrimmed-paired-output options."
)
if options.too_short_output and not options.too_short_paired_output:
raise CommandlineError(
"When using --too-short-output with paired-end "
"reads, you also need to use --too-short-paired-output")
if options.too_long_output and not options.too_long_paired_output:
raise CommandlineError(
"When using --too-long-output with paired-end "
"reads, you also need to use --too-long-paired-output")
elif quality_filename is not None:
if options.format is not None:
raise CommandlineError(
'If a pair of .fasta and .qual files is given, the -f/--format '
'parameter cannot be used.')
if options.format is not None and options.format.lower() not in [
'fasta', 'fastq', 'sra-fastq'
]:
raise CommandlineError(
"The input file format must be either 'fasta', 'fastq' or "
"'sra-fastq' (not '{0}').".format(options.format))
if options.maq:
options.colorspace = True
options.double_encode = True
options.trim_primer = True
options.strip_suffix.append('_F3')
options.suffix = "/1"
if options.zero_cap is None:
options.zero_cap = options.colorspace
if options.trim_primer and not options.colorspace:
raise CommandlineError(
"Trimming the primer makes only sense in colorspace.")
if options.double_encode and not options.colorspace:
raise CommandlineError(
"Double-encoding makes only sense in colorspace.")
if options.anywhere and options.colorspace:
raise CommandlineError(
"Using --anywhere with colorspace reads is currently not supported "
"(if you think this may be useful, contact the author).")
if not (0 <= options.error_rate <= 1.):
raise CommandlineError(
"The maximum error rate must be between 0 and 1.")
if options.overlap < 1:
raise CommandlineError("The overlap must be at least 1.")
if not (0 <= options.gc_content <= 100):
raise CommandlineError(
"GC content must be given as percentage between 0 and 100")
if options.colorspace:
if options.match_read_wildcards:
raise CommandlineError(
'IUPAC wildcards not supported in colorspace')
options.match_adapter_wildcards = False
adapter_parser = AdapterParser(
colorspace=options.colorspace,
max_error_rate=options.error_rate,
min_overlap=options.overlap,
read_wildcards=options.match_read_wildcards,
adapter_wildcards=options.match_adapter_wildcards,
indels=options.indels)
try:
adapters = adapter_parser.parse_multi(options.adapters,
options.anywhere, options.front)
adapters2 = adapter_parser.parse_multi(options.adapters2,
options.anywhere2,
options.front2)
except IOError as e:
if e.errno == errno.ENOENT:
raise CommandlineError(e)
raise
except ValueError as e:
raise CommandlineError(e)
if options.debug:
for adapter in adapters + adapters2:
adapter.enable_debug()
# Create the processing pipeline.
# If no second-read adapters were given (via -A/-G/-B/-U), we need to
# be backwards compatible and *no modifications* are done to the second read.
if paired:
pipeline = PairedEndPipeline(pair_filter_mode,
modify_first_read_only=paired == 'first')
else:
pipeline = SingleEndPipeline()
if options.cut:
if len(options.cut) > 2:
raise CommandlineError(
"You cannot remove bases from more than two ends.")
if len(options.cut) == 2 and options.cut[0] * options.cut[1] > 0:
raise CommandlineError(
"You cannot remove bases from the same end twice.")
for cut in options.cut:
if cut != 0:
pipeline.add1(UnconditionalCutter(cut))
if options.cut2:
if len(options.cut2) > 2:
raise CommandlineError(
"You cannot remove bases from more than two ends.")
if len(options.cut2) == 2 and options.cut2[0] * options.cut2[1] > 0:
raise CommandlineError(
"You cannot remove bases from the same end twice.")
for cut in options.cut2:
if cut != 0:
pipeline.add2(UnconditionalCutter(cut))
if options.nextseq_trim is not None:
pipeline.add(
NextseqQualityTrimmer(options.nextseq_trim, options.quality_base))
if options.quality_cutoff is not None:
cutoffs = parse_cutoffs(options.quality_cutoff)
pipeline.add(
QualityTrimmer(cutoffs[0], cutoffs[1], options.quality_base))
if adapters:
adapter_cutter = AdapterCutter(adapters, options.times, options.action)
pipeline.add1(adapter_cutter)
pipeline.n_adapters += len(adapters)
if adapters2:
adapter_cutter2 = AdapterCutter(adapters2, options.times,
options.action)
pipeline.add2(adapter_cutter2)
pipeline.n_adapters += len(adapters2)
# Modifiers that apply to both reads of paired-end reads unless in legacy mode
if options.length is not None:
pipeline.add(Shortener(options.length))
if options.trim_n:
pipeline.add(NEndTrimmer())
if options.length_tag:
pipeline.add(LengthTagModifier(options.length_tag))
if options.strip_f3:
options.strip_suffix.append('_F3')
for suffix in options.strip_suffix:
pipeline.add(SuffixRemover(suffix))
if options.prefix or options.suffix:
pipeline.add(PrefixSuffixAdder(options.prefix, options.suffix))
if options.double_encode:
pipeline.add(DoubleEncoder())
if options.zero_cap:
pipeline.add(ZeroCapper(quality_base=options.quality_base))
if options.trim_primer:
pipeline.add(PrimerTrimmer)
return pipeline
def pipeline_from_parsed_args(options, args, default_outfile):
"""
Setup a processing pipeline from parsed command-line options.
If there are any problems parsing the arguments, a CommandlineError is thrown.
"""
if len(args) == 0:
raise CommandlineError("At least one parameter needed: name of a FASTA or FASTQ file.")
elif len(args) > 2:
raise CommandlineError("Too many parameters.")
input_filename = args[0]
if input_filename.endswith('.qual'):
raise CommandlineError("If a .qual file is given, it must be the second argument.")
# Find out which 'mode' we need to use.
# Default: single-read trimming (neither -p nor -A/-G/-B/-U/--interleaved given)
paired = False
if options.paired_output:
# Modify first read only, keep second in sync (-p given, but not -A/-G/-B/-U).
# This exists for backwards compatibility ('legacy mode').
paired = 'first'
# Any of these options switch off legacy mode
if (options.adapters2 or options.front2 or options.anywhere2 or
options.cut2 or options.interleaved or options.pair_filter or
options.too_short_paired_output or options.too_long_paired_output):
# Full paired-end trimming when both -p and -A/-G/-B/-U given
# Read modifications (such as quality trimming) are applied also to second read.
paired = 'both'
if paired and len(args) == 1 and not options.interleaved:
raise CommandlineError("When paired-end trimming is enabled via -A/-G/-B/-U/"
"--interleaved or -p, two input files are required.")
if not paired:
if options.untrimmed_paired_output:
raise CommandlineError("Option --untrimmed-paired-output can only be used when "
"trimming paired-end reads (with option -p).")
interleaved_input = False
interleaved_output = False
if options.interleaved:
interleaved_input = len(args) == 1
interleaved_output = not options.paired_output
if not interleaved_input and not interleaved_output:
raise CommandlineError("When --interleaved is used, you cannot provide both two input files and two output files")
# Assign input_paired_filename and quality_filename
input_paired_filename = None
quality_filename = None
if paired:
if not interleaved_input:
input_paired_filename = args[1]
if not interleaved_output:
if not options.paired_output:
raise CommandlineError("When paired-end trimming is enabled via -A/-G/-B/-U, "
"a second output file needs to be specified via -p (--paired-output).")
if not options.output:
raise CommandlineError("When you use -p or --paired-output, you must also "
"use the -o option.")
if bool(options.untrimmed_output) != bool(options.untrimmed_paired_output):
raise CommandlineError("When trimming paired-end reads, you must use either none "
"or both of the --untrimmed-output/--untrimmed-paired-output options.")
if options.too_short_output and not options.too_short_paired_output:
raise CommandlineError("When using --too-short-output with paired-end "
"reads, you also need to use --too-short-paired-output")
if options.too_long_output and not options.too_long_paired_output:
raise CommandlineError("When using --too-long-output with paired-end "
"reads, you also need to use --too-long-paired-output")
elif len(args) == 2:
quality_filename = args[1]
if options.format is not None:
raise CommandlineError("If a pair of .fasta and .qual files is given, the -f/--format parameter cannot be used.")
if options.format is not None and options.format.lower() not in ['fasta', 'fastq', 'sra-fastq']:
raise CommandlineError("The input file format must be either 'fasta', 'fastq' or "
"'sra-fastq' (not '{0}').".format(options.format))
# Open input file(s)
try:
reader = seqio.open(input_filename, file2=input_paired_filename,
qualfile=quality_filename, colorspace=options.colorspace,
fileformat=options.format, interleaved=interleaved_input)
except (seqio.UnknownFileType, IOError) as e:
raise CommandlineError(e)
if options.quality_cutoff is not None:
cutoffs = options.quality_cutoff.split(',')
if len(cutoffs) == 1:
try:
cutoffs = [0, int(cutoffs[0])]
except ValueError as e:
raise CommandlineError("Quality cutoff value not recognized: {0}".format(e))
elif len(cutoffs) == 2:
try:
cutoffs = [int(cutoffs[0]), int(cutoffs[1])]
except ValueError as e:
raise CommandlineError("Quality cutoff value not recognized: {0}".format(e))
else:
raise CommandlineError("Expected one value or two values separated by comma for the quality cutoff")
else:
cutoffs = None
open_writer = functools.partial(seqio.open, mode='w',
qualities=reader.delivers_qualities, colorspace=options.colorspace)
if options.pair_filter is None:
options.pair_filter = 'any'
min_affected = 2 if options.pair_filter == 'both' else 1
if not paired:
filter_wrapper = Redirector
elif paired == 'first':
filter_wrapper = LegacyPairedRedirector
elif paired == 'both':
filter_wrapper = functools.partial(PairedRedirector, min_affected=min_affected)
filters = []
# TODO open_files = []
too_short_writer = None # too short reads go here
# TODO pass file name to TooShortReadFilter, add a .close() method?
if options.minimum_length > 0:
if options.too_short_output:
too_short_writer = open_writer(options.too_short_output, options.too_short_paired_output)
filters.append(filter_wrapper(too_short_writer, TooShortReadFilter(options.minimum_length)))
too_long_writer = None # too long reads go here
if options.maximum_length < sys.maxsize:
if options.too_long_output is not None:
too_long_writer = open_writer(options.too_long_output, options.too_long_paired_output)
filters.append(filter_wrapper(too_long_writer, TooLongReadFilter(options.maximum_length)))
if options.max_n != -1:
filters.append(filter_wrapper(None, NContentFilter(options.max_n)))
if int(options.discard_trimmed) + int(options.discard_untrimmed) + int(options.untrimmed_output is not None) > 1:
raise CommandlineError("Only one of the --discard-trimmed, --discard-untrimmed "
"and --untrimmed-output options can be used at the same time.")
demultiplexer = None
untrimmed_writer = None
writer = None
if options.output is not None and '{name}' in options.output:
if options.discard_trimmed:
raise CommandlineError("Do not use --discard-trimmed when demultiplexing.")
if paired:
raise CommandlineError("Demultiplexing not supported for paired-end files, yet.")
untrimmed = options.output.replace('{name}', 'unknown')
if options.untrimmed_output:
untrimmed = options.untrimmed_output
if options.discard_untrimmed:
untrimmed = None
demultiplexer = Demultiplexer(options.output, untrimmed,
qualities=reader.delivers_qualities, colorspace=options.colorspace)
filters.append(demultiplexer)
else:
# Set up the remaining filters to deal with --discard-trimmed,
# --discard-untrimmed and --untrimmed-output. These options
# are mutually exclusive in order to avoid brain damage.
if options.discard_trimmed:
filters.append(filter_wrapper(None, DiscardTrimmedFilter()))
elif options.discard_untrimmed:
filters.append(filter_wrapper(None, DiscardUntrimmedFilter()))
elif options.untrimmed_output:
untrimmed_writer = open_writer(options.untrimmed_output,
options.untrimmed_paired_output)
filters.append(filter_wrapper(untrimmed_writer, DiscardUntrimmedFilter()))
# Finally, figure out where the reads that passed all the previous
# filters should go.
if options.output is not None:
writer = open_writer(options.output, options.paired_output, interleaved=interleaved_output)
else:
writer = open_writer(default_outfile, interleaved=interleaved_output)
if not paired:
filters.append(NoFilter(writer))
else:
filters.append(PairedNoFilter(writer))
if options.maq:
options.colorspace = True
options.double_encode = True
options.trim_primer = True
options.strip_suffix.append('_F3')
options.suffix = "/1"
if options.zero_cap is None:
options.zero_cap = options.colorspace
if options.trim_primer and not options.colorspace:
raise CommandlineError("Trimming the primer makes only sense in colorspace.")
if options.double_encode and not options.colorspace:
raise CommandlineError("Double-encoding makes only sense in colorspace.")
if options.anywhere and options.colorspace:
raise CommandlineError("Using --anywhere with colorspace reads is currently not supported (if you think this may be useful, contact the author).")
if not (0 <= options.error_rate <= 1.):
raise CommandlineError("The maximum error rate must be between 0 and 1.")
if options.overlap < 1:
raise CommandlineError("The overlap must be at least 1.")
if options.rest_file is not None:
options.rest_file = xopen(options.rest_file, 'w')
rest_writer = RestFileWriter(options.rest_file)
else:
rest_writer = None
if options.info_file is not None:
options.info_file = xopen(options.info_file, 'w')
if options.wildcard_file is not None:
options.wildcard_file = xopen(options.wildcard_file, 'w')
if options.colorspace:
if options.match_read_wildcards:
raise CommandlineError('IUPAC wildcards not supported in colorspace')
options.match_adapter_wildcards = False
adapter_parser = AdapterParser(
colorspace=options.colorspace,
max_error_rate=options.error_rate,
min_overlap=options.overlap,
read_wildcards=options.match_read_wildcards,
adapter_wildcards=options.match_adapter_wildcards,
indels=options.indels)
try:
adapters = adapter_parser.parse_multi(options.adapters, options.anywhere, options.front)
adapters2 = adapter_parser.parse_multi(options.adapters2, options.anywhere2, options.front2)
except IOError as e:
if e.errno == errno.ENOENT:
raise CommandlineError(e)
raise
except ValueError as e:
raise CommandlineError(e)
if options.debug:
for adapter in adapters + adapters2:
adapter.enable_debug()
# Create the single-end processing pipeline (a list of "modifiers")
modifiers = []
if options.cut:
if len(options.cut) > 2:
raise CommandlineError("You cannot remove bases from more than two ends.")
if len(options.cut) == 2 and options.cut[0] * options.cut[1] > 0:
raise CommandlineError("You cannot remove bases from the same end twice.")
for cut in options.cut:
if cut != 0:
modifiers.append(UnconditionalCutter(cut))
if options.nextseq_trim is not None:
modifiers.append(NextseqQualityTrimmer(options.nextseq_trim, options.quality_base))
if cutoffs:
modifiers.append(QualityTrimmer(cutoffs[0], cutoffs[1], options.quality_base))
if adapters:
adapter_cutter = AdapterCutter(adapters, options.times,
options.wildcard_file, options.info_file,
rest_writer, options.action)
modifiers.append(adapter_cutter)
# Modifiers that apply to both reads of paired-end reads unless in legacy mode
modifiers_both = []
if options.length is not None:
modifiers_both.append(Shortener(options.length))
if options.trim_n:
modifiers_both.append(NEndTrimmer())
if options.length_tag:
modifiers_both.append(LengthTagModifier(options.length_tag))
if options.strip_f3:
options.strip_suffix.append('_F3')
for suffix in options.strip_suffix:
modifiers_both.append(SuffixRemover(suffix))
if options.prefix or options.suffix:
modifiers_both.append(PrefixSuffixAdder(options.prefix, options.suffix))
if options.double_encode:
modifiers_both.append(DoubleEncoder())
if options.zero_cap and reader.delivers_qualities:
modifiers_both.append(ZeroCapper(quality_base=options.quality_base))
if options.trim_primer:
modifiers_both.append(PrimerTrimmer)
modifiers.extend(modifiers_both)
# For paired-end data, create a second processing pipeline.
# However, if no second-read adapters were given (via -A/-G/-B/-U), we need to
# be backwards compatible and *no modifications* are done to the second read.
modifiers2 = []
if paired == 'both':
if options.cut2:
if len(options.cut2) > 2:
raise CommandlineError("You cannot remove bases from more than two ends.")
if len(options.cut2) == 2 and options.cut2[0] * options.cut2[1] > 0:
raise CommandlineError("You cannot remove bases from the same end twice.")
for cut in options.cut2:
if cut != 0:
modifiers2.append(UnconditionalCutter(cut))
if cutoffs:
modifiers2.append(QualityTrimmer(cutoffs[0], cutoffs[1], options.quality_base))
if adapters2:
adapter_cutter2 = AdapterCutter(adapters2, options.times,
None, None, None, options.action)
modifiers2.append(adapter_cutter2)
modifiers2.extend(modifiers_both)
if paired:
pipeline = PairedEndPipeline(reader, modifiers, modifiers2, filters)
else:
pipeline = SingleEndPipeline(reader, modifiers, filters)
# TODO the following should be done some other way
pipeline.paired = paired
pipeline.error_rate = options.error_rate
pipeline.n_adapters = len(adapters) + len(adapters2)
pipeline.should_print_warning = paired == 'first' and (modifiers_both or cutoffs)
for f in [writer, untrimmed_writer,
options.rest_file, options.wildcard_file,
options.info_file, too_short_writer, too_long_writer,
options.info_file, demultiplexer]:
pipeline.register_file_to_close(f)
return pipeline
def pipeline_from_parsed_args(args, paired, is_interleaved_output):
"""
Setup a processing pipeline from parsed command-line arguments.
If there are any problems parsing the arguments, a CommandLineError is thrown.
Return an instance of Pipeline (SingleEndPipeline or PairedEndPipeline)
"""
check_arguments(args, paired, is_interleaved_output)
if args.action == 'none':
args.action = None
adapter_parser = AdapterParser(
max_error_rate=args.error_rate,
min_overlap=args.overlap,
read_wildcards=args.match_read_wildcards,
adapter_wildcards=args.match_adapter_wildcards,
indels=args.indels,
)
try:
adapters = adapter_parser.parse_multi(args.adapters, args.anywhere, args.front)
adapters2 = adapter_parser.parse_multi(args.adapters2, args.anywhere2, args.front2)
except IOError as e:
if e.errno == errno.ENOENT:
raise CommandLineError(e)
raise
except ValueError as e:
raise CommandLineError(e)
if args.debug:
for adapter in adapters + adapters2:
adapter.enable_debug()
# Create the processing pipeline
if paired:
pair_filter_mode = 'any' if args.pair_filter is None else args.pair_filter
pipeline = PairedEndPipeline(pair_filter_mode)
else:
pipeline = SingleEndPipeline()
# When adapters are being trimmed only in R1 or R2, override the pair filter mode
# as using the default of 'any' would regard all read pairs as untrimmed.
if paired and (not adapters2 or not adapters) and (
args.discard_untrimmed or args.untrimmed_output or args.untrimmed_paired_output):
pipeline.override_untrimmed_pair_filter = True
for i, cut_arg in enumerate([args.cut, args.cut2]):
# cut_arg is a list
if not cut_arg:
continue
if len(cut_arg) > 2:
raise CommandLineError("You cannot remove bases from more than two ends.")
if len(cut_arg) == 2 and cut_arg[0] * cut_arg[1] > 0:
raise CommandLineError("You cannot remove bases from the same end twice.")
for c in cut_arg:
if c == 0:
continue
if i == 0: # R1
if paired:
pipeline.add(UnconditionalCutter(c), None)
else:
pipeline.add(UnconditionalCutter(c))
else:
# R2
assert isinstance(pipeline, PairedEndPipeline)
pipeline.add(None, UnconditionalCutter(c))
pipeline_add = pipeline.add_both if paired else pipeline.add
if args.nextseq_trim is not None:
pipeline_add(NextseqQualityTrimmer(args.nextseq_trim, args.quality_base))
if args.quality_cutoff is not None:
cutoffs = parse_cutoffs(args.quality_cutoff)
pipeline_add(QualityTrimmer(cutoffs[0], cutoffs[1], args.quality_base))
if args.pair_adapters:
if not paired:
raise CommandLineError("Option --pair-adapters can only be used when trimming "
"paired-end reads")
if args.times != 1:
raise CommandLineError("--pair-adapters cannot be used with --times")
try:
cutter = PairedAdapterCutter(adapters, adapters2, args.action)
except PairedAdapterCutterError as e:
raise CommandLineError("--pair-adapters: " + str(e))
pipeline.add_paired_modifier(cutter)
else:
adapter_cutter, adapter_cutter2 = None, None
if adapters:
adapter_cutter = AdapterCutter(adapters, args.times, args.action)
if adapters2:
adapter_cutter2 = AdapterCutter(adapters2, args.times, args.action)
if paired:
if adapter_cutter or adapter_cutter2:
pipeline.add(adapter_cutter, adapter_cutter2)
else:
if adapter_cutter:
pipeline.add(adapter_cutter)
# Remaining modifiers that apply to both reads of paired-end reads
if args.length is not None:
pipeline_add(Shortener(args.length))
if args.trim_n:
pipeline_add(NEndTrimmer())
if args.length_tag:
pipeline_add(LengthTagModifier(args.length_tag))
for suffix in args.strip_suffix:
pipeline_add(SuffixRemover(suffix))
if args.prefix or args.suffix:
pipeline_add(PrefixSuffixAdder(args.prefix, args.suffix))
if args.zero_cap:
pipeline_add(ZeroCapper(quality_base=args.quality_base))
# Set filtering parameters
# Minimum/maximum length
for attr in 'minimum_length', 'maximum_length':
param = getattr(args, attr)
if param is not None:
lengths = parse_lengths(param)
if not paired and len(lengths) == 2:
raise CommandLineError('Two minimum or maximum lengths given for single-end data')
if paired and len(lengths) == 1:
lengths = (lengths[0], lengths[0])
setattr(pipeline, attr, lengths)
pipeline.max_n = args.max_n
pipeline.discard_casava = args.discard_casava
pipeline.discard_trimmed = args.discard_trimmed
pipeline.discard_untrimmed = args.discard_untrimmed
return pipeline
