def OnLeftDownAddLine(self, event):
"""Left mouse button pressed - add new feature"""
try:
mapLayer = self.toolbar.GetLayer().GetName()
except:
return
if self.toolbar.GetAction("type") in ["point", "centroid"]:
# add new point / centroiud
east, north = self.Pixel2Cell(self.mouse["begin"])
nfeat, fids = self.digit.AddFeature(
self.toolbar.GetAction("type"), [(east, north)]
)
if nfeat < 1:
return
self.UpdateMap(render=False) # redraw map
# add new record into attribute table
if UserSettings.Get(group="vdigit", key="addRecord", subkey="enabled"):
# select attributes based on layer and category
cats = {
fids[0]: {
UserSettings.Get(group="vdigit", key="layer", subkey="value"): (
UserSettings.Get(
group="vdigit", key="category", subkey="value"
),
)
}
}
posWindow = self.ClientToScreen(
(
self.mouse["end"][0] + self.dialogOffset,
self.mouse["end"][1] + self.dialogOffset,
)
)
addRecordDlg = DisplayAttributesDialog(
parent=self,
map=mapLayer,
cats=cats,
pos=posWindow,
action="add",
ignoreError=True,
)
if self.toolbar.GetAction("type") == "centroid":
for fid in fids:
self._geomAttrb(fid, addRecordDlg, "area")
self._geomAttrb(fid, addRecordDlg, "perimeter")
if addRecordDlg.IsFound():
addRecordDlg.ShowModal()
addRecordDlg.Destroy()
elif self.toolbar.GetAction("type") in ["line", "boundary", "area"]:
# add new point to the line
self.polycoords.append(self.Pixel2Cell(event.GetPosition()))
self.DrawLines(pdc=self.pdcTmp)
def _onRightUp(self, event):
"""Right mouse button released (confirm action)"""
action = self.toolbar.GetAction()
if action == "addLine" and self.toolbar.GetAction("type") in [
"line",
"boundary",
"area",
]:
# -> add new line / boundary
try:
mapName = self.toolbar.GetLayer().GetName()
except:
mapName = None
GError(parent=self, message=_("No vector map selected for editing."))
if mapName:
if self.toolbar.GetAction("type") == "line":
line = True
else:
line = False
if len(self.polycoords) < 2: # ignore 'one-point' lines
return
nfeat, fids = self.digit.AddFeature(
self.toolbar.GetAction("type"), self.polycoords
)
if nfeat < 0:
return
position = self.Cell2Pixel(self.polycoords[-1])
self.polycoords = []
self.UpdateMap(render=False)
self.redrawAll = True
self.Refresh()
# add new record into attribute table
if self._addRecord() and (line is True or (not line and nfeat > 0)):
posWindow = self.ClientToScreen(
(
position[0] + self.dialogOffset,
position[1] + self.dialogOffset,
)
)
# select attributes based on layer and category
cats = {
fids[0]: {
UserSettings.Get(
group="vdigit", key="layer", subkey="value"
): (
UserSettings.Get(
group="vdigit", key="category", subkey="value"
),
)
}
}
addRecordDlg = DisplayAttributesDialog(
parent=self,
map=mapName,
cats=cats,
pos=posWindow,
action="add",
ignoreError=True,
)
for fid in fids:
self._geomAttrb(fid, addRecordDlg, "length")
# auto-placing centroid
self._geomAttrb(fid, addRecordDlg, "area")
self._geomAttrb(fid, addRecordDlg, "perimeter")
if addRecordDlg.IsFound():
addRecordDlg.ShowModal()
addRecordDlg.Destroy()
elif action == "deleteLine":
# -> delete selected vector features
if self.digit.DeleteSelectedLines() < 0:
return
self._updateATM()
elif action == "deleteArea":
# -> delete selected vector areas
if self.digit.DeleteSelectedAreas() < 0:
return
self._updateATM()
elif action == "splitLine":
# split line
if self.digit.SplitLine(self.Pixel2Cell(self.mouse["begin"])) < 0:
return
elif action == "addVertex":
# add vertex
fid = self.digit.AddVertex(self.Pixel2Cell(self.mouse["begin"]))
if fid < 0:
return
elif action == "removeVertex":
# remove vertex
fid = self.digit.RemoveVertex(self.Pixel2Cell(self.mouse["begin"]))
if fid < 0:
return
self._geomAttrbUpdate(
[
fid,
]
)
elif action in ("copyCats", "copyAttrs") and hasattr(self, "copyCatsIds"):
if action == "copyCats":
if (
self.digit.CopyCats(
self.copyCatsList, self.copyCatsIds, copyAttrb=False
)
< 0
):
return
else:
if (
self.digit.CopyCats(
self.copyCatsList, self.copyCatsIds, copyAttrb=True
)
< 0
):
return
del self.copyCatsList
del self.copyCatsIds
self._updateATM()
elif action == "editLine" and hasattr(self, "moveInfo"):
line = self.digit.GetDisplay().GetSelected()[0]
if self.digit.EditLine(line, self.polycoords) < 0:
return
del self.moveInfo
elif action == "flipLine":
if self.digit.FlipLine() < 0:
return
elif action == "mergeLine":
if self.digit.MergeLine() < 0:
return
elif action == "breakLine":
if self.digit.BreakLine() < 0:
return
elif action == "snapLine":
if self.digit.SnapLine() < 0:
return
elif action == "connectLine":
if len(self.digit.GetDisplay().GetSelected()) > 1:
if self.digit.ConnectLine() < 0:
return
elif action == "copyLine":
if self.digit.CopyLine(self.copyIds) < 0:
return
del self.copyIds
if self.layerTmp:
self.Map.DeleteLayer(self.layerTmp)
self.UpdateMap(render=True, renderVector=False)
del self.layerTmp
elif action == "zbulkLine" and len(self.polycoords) == 2:
pos1 = self.polycoords[0]
pos2 = self.polycoords[1]
selected = self.digit.GetDisplay().GetSelected()
dlg = VDigitZBulkDialog(
parent=self, title=_("Z bulk-labeling dialog"), nselected=len(selected)
)
if dlg.ShowModal() == wx.ID_OK:
if (
self.digit.ZBulkLines(
pos1, pos2, dlg.value.GetValue(), dlg.step.GetValue()
)
< 0
):
return
self.UpdateMap(render=False)
elif action == "typeConv":
# -> feature type conversion
# - point <-> centroid
# - line <-> boundary
if self.digit.TypeConvForSelectedLines() < 0:
return
if action != "addLine":
# unselect and re-render
self.digit.GetDisplay().SetSelected([])
self.polycoords = []
self.UpdateMap(render=False)
def _onRightUp(self, event):
"""!Right mouse button released (confirm action)
"""
action = self.toolbar.GetAction()
if action == "addLine" and \
self.toolbar.GetAction('type') in ["line", "boundary", "area"]:
# -> add new line / boundary
try:
mapName = self.toolbar.GetLayer().GetName()
except:
mapName = None
GError(parent=self,
message=_("No vector map selected for editing."))
if mapName:
if self.toolbar.GetAction('type') == 'line':
line = True
else:
line = False
if len(self.polycoords) < 2: # ignore 'one-point' lines
return
nfeat, fids = self.digit.AddFeature(
self.toolbar.GetAction('type'), self.polycoords)
if nfeat < 0:
return
position = self.Cell2Pixel(self.polycoords[-1])
self.polycoords = []
self.UpdateMap(render=False)
self.redrawAll = True
self.Refresh()
# add new record into atribute table
if UserSettings.Get(group = 'vdigit', key = "addRecord", subkey = 'enabled') and \
(line is True or \
(not line and nfeat > 0)):
posWindow = self.ClientToScreen(
(position[0] + self.dialogOffset,
position[1] + self.dialogOffset))
# select attributes based on layer and category
cats = {
fids[0]: {
UserSettings.Get(group='vdigit',
key="layer",
subkey='value'):
(UserSettings.Get(group='vdigit',
key="category",
subkey='value'), )
}
}
addRecordDlg = DisplayAttributesDialog(parent=self,
map=mapName,
cats=cats,
pos=posWindow,
action="add",
ignoreError=True)
for fid in fids:
self._geomAttrb(fid, addRecordDlg, 'length')
# auto-placing centroid
self._geomAttrb(fid, addRecordDlg, 'area')
self._geomAttrb(fid, addRecordDlg, 'perimeter')
if addRecordDlg.mapDBInfo and \
addRecordDlg.ShowModal() == wx.ID_OK:
sqlfile = tempfile.NamedTemporaryFile(mode="w")
for sql in addRecordDlg.GetSQLString():
sqlfile.file.write(sql + ";\n")
sqlfile.file.flush()
RunCommand('db.execute',
parent=True,
quiet=True,
input=sqlfile.name)
if addRecordDlg.mapDBInfo:
self._updateATM()
elif action == "deleteLine":
# -> delete selected vector features
if self.digit.DeleteSelectedLines() < 0:
return
self._updateATM()
elif action == "splitLine":
# split line
if self.digit.SplitLine(self.Pixel2Cell(self.mouse['begin'])) < 0:
return
elif action == "addVertex":
# add vertex
fid = self.digit.AddVertex(self.Pixel2Cell(self.mouse['begin']))
if fid < 0:
return
elif action == "removeVertex":
# remove vertex
fid = self.digit.RemoveVertex(self.Pixel2Cell(self.mouse['begin']))
if fid < 0:
return
self._geomAttrbUpdate([
fid,
])
elif action in ("copyCats", "copyAttrs"):
if action == 'copyCats':
if self.digit.CopyCats(self.copyCatsList,
self.copyCatsIds,
copyAttrb=False) < 0:
return
else:
if self.digit.CopyCats(self.copyCatsList,
self.copyCatsIds,
copyAttrb=True) < 0:
return
del self.copyCatsList
del self.copyCatsIds
self._updateATM()
elif action == "editLine" and \
hasattr(self, "moveInfo"):
line = self.digit.GetDisplay().GetSelected()[0]
if self.digit.EditLine(line, self.polycoords) < 0:
return
del self.moveInfo
elif action == "flipLine":
if self.digit.FlipLine() < 0:
return
elif action == "mergeLine":
if self.digit.MergeLine() < 0:
return
elif action == "breakLine":
if self.digit.BreakLine() < 0:
return
elif action == "snapLine":
if self.digit.SnapLine() < 0:
return
elif action == "connectLine":
if len(self.digit.GetDisplay().GetSelected()) > 1:
if self.digit.ConnectLine() < 0:
return
elif action == "copyLine":
if self.digit.CopyLine(self.copyIds) < 0:
return
del self.copyIds
if self.layerTmp:
self.Map.DeleteLayer(self.layerTmp)
self.UpdateMap(render=True, renderVector=False)
del self.layerTmp
elif action == "zbulkLine" and len(self.polycoords) == 2:
pos1 = self.polycoords[0]
pos2 = self.polycoords[1]
selected = self.digit.GetDisplay().GetSelected()
dlg = VDigitZBulkDialog(parent=self,
title=_("Z bulk-labeling dialog"),
nselected=len(selected))
if dlg.ShowModal() == wx.ID_OK:
if self.digit.ZBulkLines(pos1, pos2, dlg.value.GetValue(),
dlg.step.GetValue()) < 0:
return
self.UpdateMap(render=False)
elif action == "typeConv":
# -> feature type conversion
# - point <-> centroid
# - line <-> boundary
if self.digit.TypeConvForSelectedLines() < 0:
return
if action != "addLine":
# unselect and re-render
self.digit.GetDisplay().SetSelected([])
self.polycoords = []
self.UpdateMap(render=False)
def OnLeftDownAddLine(self, event):
"""!Left mouse button pressed - add new feature
"""
try:
mapLayer = self.toolbar.GetLayer().GetName()
except:
return
if self.toolbar.GetAction('type') in ['point', 'centroid']:
# add new point / centroiud
east, north = self.Pixel2Cell(self.mouse['begin'])
nfeat, fids = self.digit.AddFeature(self.toolbar.GetAction('type'),
[(east, north)])
if nfeat < 1:
return
self.UpdateMap(render=False) # redraw map
# add new record into atribute table
if UserSettings.Get(group='vdigit',
key="addRecord",
subkey='enabled'):
# select attributes based on layer and category
cats = {
fids[0]: {
UserSettings.Get(group='vdigit',
key="layer",
subkey='value'):
(UserSettings.Get(group='vdigit',
key="category",
subkey='value'), )
}
}
posWindow = self.ClientToScreen(
(self.mouse['end'][0] + self.dialogOffset,
self.mouse['end'][1] + self.dialogOffset))
addRecordDlg = DisplayAttributesDialog(parent=self,
map=mapLayer,
cats=cats,
pos=posWindow,
action="add",
ignoreError=True)
if self.toolbar.GetAction('type') == 'centroid':
for fid in fids:
self._geomAttrb(fid, addRecordDlg, 'area')
self._geomAttrb(fid, addRecordDlg, 'perimeter')
if addRecordDlg.mapDBInfo and \
addRecordDlg.ShowModal() == wx.ID_OK:
sqlfile = tempfile.NamedTemporaryFile(mode="w")
for sql in addRecordDlg.GetSQLString():
sqlfile.file.write(sql + ";\n")
sqlfile.file.flush()
RunCommand('db.execute',
parent=self,
quiet=True,
input=sqlfile.name)
if addRecordDlg.mapDBInfo:
self._updateATM()
elif self.toolbar.GetAction('type') in ["line", "boundary", "area"]:
# add new point to the line
self.polycoords.append(self.Pixel2Cell(
event.GetPositionTuple()[:]))
self.DrawLines(pdc=self.pdcTmp)