Python read_ch2示例

示例#1

def test_switch():
    data_test = [120, 120, 120, 120, 120, 120, 120, 120, 0, 0, 131, 260]

    dcapi.init()
    dcapi.ppm_update(data_test)
    dcapi.enable_control(1)

    try:

        while dcapi.read_button() == 0:
            time.sleep(1)
            if dcapi.read_ch1() == 1:
                print 'CH1 on'
            else:
                print 'CH1 off'

            if dcapi.read_ch2() == 1:
                print 'CH2 on'
            else:
                print 'CH2 off'

        print "exiting.."

    finally:
        dcapi.enable_control(0)
        print "script termine, controle rendu"
        dcapi.free_pi()

示例#2

文件： autopilot.py 项目： Gyssais/Projet_drone

def test_switch():
    data_test = [120,120,120,120, 120,120,120,120,0,0,131,260]

    dcapi.init()
    dcapi.ppm_update(data_test)
    dcapi.enable_control(1)

    try:

        while dcapi.read_button() == 0:
            time.sleep(1)
            if dcapi.read_ch1() == 1 :
                print 'CH1 on'
            else:
                print 'CH1 off'

            if dcapi.read_ch2() == 1:
                 print 'CH2 on'
            else:
                print 'CH2 off'

        print "exiting.."

    finally:
        dcapi.enable_control(0)
        print "script termine, controle rendu"
        dcapi.free_pi()

示例#3

文件： autopilot.py 项目： Gyssais/Projet_drone

def demo_start_stop():
    button = 0
    try:
        dcapi.enable_control(1)

        print 'attente controle'
        while dcapi.read_ch1() == 0: # attente controle
            if dcapi.read_button() == 1:
                button = 1 
                break
            time.sleep(0.1)
            
        dcapi.led_blink()
        print str(dcapi.calibration_gyro())
        dcapi.led_on()

        while button == 0:

            print 'attente arming'
            while dcapi.read_ch2() == 0: # attente ordre arming
                if dcapi.read_button() == 1:
                    button = 1
                    break
                time.sleep(0.1)

            if button == 0:
                dcapi.led_blink()
                print str(dcapi.arm())
                dcapi.led_on()

            print 'attente disarming'
            while dcapi.read_ch2() == 1: # attente ordre disarming
                if dcapi.read_button() == 1:
                    button = 1
                    break
                time.sleep(0.1)

            if button == 0:
                dcapi.led_blink()
                print str(dcapi.disarm())
                dcapi.led_on()

   
    finally:
        dcapi.enable_control(0)
        print "script termine, controle rendu"
        dcapi.free_pi()

示例#4

def demo_start_stop():
    button = 0
    try:
        dcapi.enable_control(1)

        print 'attente controle'
        while dcapi.read_ch1() == 0:  # attente controle
            if dcapi.read_button() == 1:
                button = 1
                break
            time.sleep(0.1)

        dcapi.led_blink()
        print str(dcapi.calibration_gyro())
        dcapi.led_on()

        while button == 0:

            print 'attente arming'
            while dcapi.read_ch2() == 0:  # attente ordre arming
                if dcapi.read_button() == 1:
                    button = 1
                    break
                time.sleep(0.1)

            if button == 0:
                dcapi.led_blink()
                print str(dcapi.arm())
                dcapi.led_on()

            print 'attente disarming'
            while dcapi.read_ch2() == 1:  # attente ordre disarming
                if dcapi.read_button() == 1:
                    button = 1
                    break
                time.sleep(0.1)

            if button == 0:
                dcapi.led_blink()
                print str(dcapi.disarm())
                dcapi.led_on()

    finally:
        dcapi.enable_control(0)
        print "script termine, controle rendu"
        dcapi.free_pi()

示例#5

文件： demo1.py 项目： Gyssais/Projet_drone

    print 'attente controle'
    while dcapi.read_ch1() == 0:  # attente controle
        if dcapi.read_button() == 1:
            button = 1
            break
        time.sleep(0.1)

    dcapi.led_blink()
    print str(dcapi.calibration_acc())
    dcapi.led_on()

    while button == 0:

        print 'attente arming'
        while dcapi.read_ch2() == 0:  # attente ordre arming
            if dcapi.read_button() == 1:
                button = 1
                break
            time.sleep(0.1)

        if button == 0:
            dcapi.led_blink()
            print str(dcapi.arm())
            dcapi.led_on()

        print 'attente disarming'
        while dcapi.read_ch2() == 1:  # attente ordre disarming
            if dcapi.read_button() == 1:
                button = 1
                break

示例#6

文件： demo1.py 项目： Gyssais/Projet_drone

    print 'attente controle'
    while dcapi.read_ch1() == 0: # attente controle
        if dcapi.read_button() == 1:
            button = 1 
            break
        time.sleep(0.1)
        
    dcapi.led_blink()
    print str(dcapi.calibration_acc())
    dcapi.led_on()

    while button == 0:

        print 'attente arming'
        while dcapi.read_ch2() == 0: # attente ordre arming
            if dcapi.read_button() == 1:
                button = 1
                break
            time.sleep(0.1)

        if button == 0:
            dcapi.led_blink()
            print str(dcapi.arm())
            dcapi.led_on()

        print 'attente disarming'
        while dcapi.read_ch2() == 1: # attente ordre disarming
            if dcapi.read_button() == 1:
                button = 1
                break

示例#7

import time

import dcapi

data_test = [120,120,120,120, 120,120,120,120,0,0,131,260]

dcapi.init()
dcapi.ppm_update(data_test)
dcapi.enable_control(1)

try:

    while dcapi.read_button() == 0:
        time.sleep(1)
        if dcapi.read_ch1() == 1 :
            print 'CH1 on'
        else:
            print 'CH1 off'

        if dcapi.read_ch2() == 1:
             print 'CH2 on'
        else:
            print 'CH2 off'

    print "exiting.."

finally:                      # quand on quitte, normalement ou pas
    dcapi.enable_control(0)
    print "script termine, controle rendu"
    dcapi.free_pi()