def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
self.editor = [
DialogFloat("radius",
"Radius",
units=units,
default=min(width, length) / 2,
min=1.0,
max=max(width, length) * 2.0),
DialogFloat("turns", "Turns", default=10.0, min=.1, max=200.0),
DialogFloat("angleStart", "Starting angle", units="degrees"),
DialogFloat("angleRate",
"Sample rate",
units="degrees",
min=1,
default=5.0),
DialogYesNo("fill", "Fill", default=False),
DialogYesNo("fitToTable", "Fit to table"),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
]
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogInt("depth", "Depth of fractility", default=2, min=1, max=7),
DialogYesNo("fit", "Auto-fit to table", default=False),
DialogYesNo("round", "Rounded edges", default=False),
DialogBreak(),
DialogFloat("xOffset", "X Origin", units=units, default=0.0),
DialogFloat("yOffset", "Y Origin", units=units, default=0.0),
DialogFloat("width", "Width (x)", units=units, default=width),
DialogFloat("length", "Length (y)", units=units, default=length),
]
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
self.editor = [
DialogInts("teeths",
"Wheel Teeth",
units="n1,n2,...",
default=[40, -30],
min=-60,
max=60,
minNums=2,
maxNums=3),
DialogInt("resolution", "Resolution", default=7, min=1, max=60),
DialogYesNo("fitToTable", "Fit to table"),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
DialogFloat("radius",
"Radius",
units=units,
default=min(width, length) / 2,
min=1.0),
]
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogInt("depth", "Depth of fractility", default=2, max=10),
DialogFloat("branchProbability",
"Probability of branching",
default=0.7,
min=0.0,
max=1.0),
DialogFloat("percent", "Fractility size decrease", default=0.3),
DialogYesNo("round", "Rounded crystals", default=False),
DialogInt("seed",
"Random seed",
default=1,
min=0,
max=10000,
rbutton=True),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
]
self.table = [(0.0, 0.0), (width, length)]
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogFloat("maxHeight",
"Maximum height",
units=units,
default=length * .75,
min=1.0,
max=length),
DialogFloat("maxWind",
"Maximum wind",
units=units,
default=inchesToUnits(1., units),
min=0.,
max=inchesToUnits(4., units)),
DialogInt("blades", "Blades of grass", default=100, min=1,
max=250),
DialogYesNo(
"dWind",
"Directional wind",
),
]
self.width = width
self.length = length
self.thickness = inchesToUnits(1, units)
self.steps = 5
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
self.editor = [
DialogFloat("r1",
"First radius",
units=units,
min=0.0,
max=max(width, length) * 2),
DialogFloat("r2",
"Second radius",
units=units,
default=min(width, length) / 2,
min=0.0,
max=max(width, length) * 2),
DialogFloat("turns", "Turns", default=10., min=0.1, max=100.),
DialogFloat("angleStart",
"Starting angle",
units="degrees",
min=0.0,
max=360.0,
step=15.),
DialogFloat("angleRate",
"Sample rate",
units="degrees",
default=15.0,
min=-180.0,
max=180.0),
DialogFloat("base",
"Growth base power",
default=1.0,
min=0.25,
max=10.0),
DialogYesNo("fill", "Fill in spiral"),
DialogYesNo("fitToTable", "Fit to table"),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
]
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
radius = min(width, length) / 2.0
mRadius = max(width, length) / 2.0
self.editor = [
DialogFloat("petals", "Petals", default=7.0, min=0.001, max=45.0),
DialogFloat("angleStart",
"Starting angle",
units="degrees",
min=-180.,
max=180.),
DialogFloat("angleShift",
"Shift angle",
units="degrees",
default=0.0,
min=-10.0,
max=10.0),
DialogFloat("angleRate",
"Sample rate",
units="degrees",
default=3.0,
min=1.0,
max=10.0),
DialogInt("turns",
"Turns",
default=20,
min=1,
max=int(mRadius / ballSize * 4)),
DialogYesNo("fitToTable", "Fit to table"),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
DialogFloat("innerRadius",
"Inner radius",
units=units,
default=radius * .15,
min=0.0,
max=mRadius),
DialogFloat("outerRadius",
"Outer radius",
units=units,
default=radius,
min=1.0,
max=mRadius),
]
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
rippleSize = min(width, length) * .05
radius = max(width, length) / 2.0
self.editor = [
DialogInt("rays", "Ray count", default=12, min=1, max=60),
DialogInt("rayWidth",
"Ray width",
units="degrees",
default=10,
min=1,
max=60),
DialogFloat("ripples",
"Number of ripples",
default=2.0,
min=0.0,
max=20.0),
DialogFloat("rippleSize",
"Size of ripples",
units=units,
default=rippleSize,
min=0.,
max=3 * rippleSize),
DialogYesNo("fitToTable", "Fit to table"),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
DialogFloat("innerRadius",
"Inner radius",
units=units,
default=2.0,
min=0.0,
max=radius),
DialogFloat("outerRadius",
"Outer radius",
units=units,
default=min(width, length) / 2,
min=1.0,
max=radius),
]
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
self.editor = [
DialogFloat("innerRadius",
"Inner radius",
units=units,
min=0.0,
max=min(width, length) / 2.),
DialogFloat("turns", "Turns", default=5., min=1.0, max=50.0),
DialogFloat("angleRate",
"Sample rate",
units="degrees",
default=11.0,
min=1,
max=45.0),
DialogFloat("curveFactor",
"Curve factor",
default=1.,
min=-6.,
max=6.),
DialogFloat("scaleFactor",
"Scale factor",
default=1.,
min=.01,
max=10.0),
DialogFloat("logGrowth",
"Logarithmic growth",
units="percent",
default=0.,
min=0.,
max=2.),
DialogYesNo("fitToTable", "Fit to table"),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
]
self.maxRadius = 2. * sqrt(width**2 + length**2)
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
self.editor = [
DialogInt("points", "Points", min=3, max=75, default=5),
DialogFloat("innerRadius1",
"Inner radius 1",
units=units,
default=inchesToUnits(3.0, units),
min=1.0,
max=max(width, length) / 2),
DialogFloat("outerRadius1",
"Outer radius 1",
units=units,
default=min(width, length) / 2,
min=2.0,
max=max(width, length) / 2),
DialogFloat("innerRadius2",
"Inner radius 2",
units=units,
default=0.0),
DialogFloat("outerRadius2",
"Outer radius 2",
units=units,
default=inchesToUnits(5.0, units)),
DialogFloat("angleStart", "Starting angle", units="degrees"),
DialogFloat("angleShift",
"Shift angle",
units="degrees",
default=0.0,
min=0.0,
max=15.0),
DialogInt("steps", "Number of stars", default=5, min=0, max=40),
DialogYesNo("fitToTable", "Fit to table"),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
]
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogStr("expression",
"Expression",
default='cos( 3.*radians( sqrt(x*x+y*y )))',
length=45),
DialogFloat("xStart", "X Start", default=-180.0),
DialogFloat("xEnd", "X End", default=180.0),
DialogInt("xPoints", "X Points", default=45, min=2, max=180),
DialogFloat("yStart", "Y Start", default=-180.0),
DialogFloat("yEnd", "Y End", default=180.0),
DialogInt("yPoints", "Y Points", default=45, min=2, max=180),
DialogFloat("zScale", "Z Scale", default=1.0, min=0.01, max=10.0),
DialogFloat("xyAngle",
"Horizontal Rotation",
units="degrees",
default=45.0,
min=-45.0,
max=45.0),
DialogFloat("yzAngle",
"Vertical Tilt",
units="degrees",
default=45.0,
min=0.0,
max=90.0),
DialogFloat("zoom", "Zoom", default=1.0, min=0.25, max=10.0),
DialogYesNo("topDown", "Top Down", default=True),
DialogBreak(),
DialogFloat("xOffset", "X Origin", units=units, default=0.0),
DialogFloat("yOffset", "Y Origin", units=units, default=0.0),
DialogFloat("width",
"Width",
units=units,
default=width,
min=1.0,
max=width * 4),
DialogFloat("length",
"Length",
units=units,
default=length,
min=1.0,
max=length * 4),
]
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
radius = min(width, length) / 2.0
mRadius = max(width, length) / 2.0
self.editor = [
DialogInt("cwArms", "CW arms", default=12, min=1, max=120),
DialogFloat("cwAngular",
"CW angular distance",
default=30.0,
units="degrees"),
DialogInt("ccwArms", "CCW arms", default=12, min=1, max=120),
DialogFloat("ccwAngular",
"CCW angular distance",
default=30.0,
units="degrees"),
DialogInt("points", "Points per arm", default=10, min=2),
DialogYesNo("fitToTable", "Fit to table"),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
DialogFloat("innerRadius",
"Inner radius",
units=units,
default=radius * 0.15,
min=0.0,
max=mRadius),
DialogFloat("outerRadius",
"Outer radius",
units=units,
default=radius,
min=1.0,
max=mRadius),
]
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
self.editor = [
DialogFloat("radius",
"Starting Radius",
units=units,
default=min(width, length) / 2.,
min=3.,
max=max(width, length)),
DialogFloat("angle",
"Phyllotaxic Angle",
units="degrees",
default=137.51,
min=1,
max=180.0),
DialogFloat("reductionRate",
"Reduction Rate",
default=0.976,
min=.85,
max=.99),
DialogFloat("petalWidth",
"Petal Width",
units="degrees",
default=15.,
min=5.,
max=90.),
DialogInt("iterations", "Iterations", default=100, min=1, max=500),
DialogYesNo("round", "Rounded edges", default=False),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
]
def __init__(self, width, length, ballSize, units):
self.editor = [
DialogInt("repetitions", "Repetitions", default=3, min=1, max=20),
DialogFloat("heading",
"Initial heading",
units="degrees",
default=0.0),
DialogFloat("angle", "Angle", units="degrees", default=90.0),
DialogYesNo("round", "Rounded edges", default=False),
DialogBreak(),
DialogStr("axiom", "Axiom", length=30),
DialogStr("rule1", "Rule 1", length=30),
DialogStr("rule2", "Rule 2", length=30),
DialogStr("rule3", "Rule 3", length=30),
DialogStr("rule4", "Rule 4", length=30),
DialogStr("rule5", "Rule 5", length=30),
DialogStr("rule6", "Rule 6", length=30),
DialogBreak(),
DialogFloat("xOrigin", "X Origin", units=units, default=0.0),
DialogFloat("yOrigin", "Y Origin", units=units, default=0.0),
DialogFloat("width", "Width", units=units, default=width),
DialogFloat("length", "Length", units=units, default=length),
]
self.MAX_LEN = 50000
def __init__(self, width, length, ballSize, units):
self.width = width
self.length = length
radius = min(width, length) / 2.0
mRadius = max(width, length) / 2.0
self.editor = [
DialogFloat("turns",
"Turns",
default=10,
min=1,
max=max(width, length) * 4),
DialogFloat("angleStart", "Starting angle", units="degrees"),
DialogFloat("angleRate",
"Sample rate",
units="degrees",
default=5.0),
DialogFloat("base", "Growth base power", default=1.0, min=0.001),
DialogFloats("frequencies",
"Wave frequency(s)",
units="f1,f2,...",
default=[6, 30],
min=1.0,
max=60.0,
minNums=1,
maxNums=3),
DialogFloats("amplitudes",
"Wave amplitude(s)",
units="%s a1,a2,..." % units,
default=[1, .5],
min=0.1,
max=inchesToUnits(2.0, units),
minNums=1,
maxNums=3),
DialogFloats("phases",
"Wave phase(s)",
units="degrees p1,p2,...",
default=[0, 0],
min=0.0,
max=360.0,
minNums=1,
maxNums=3,
rRound=0),
DialogYesNo("fitToTable", "Fit to table"),
DialogBreak(),
DialogFloat("xCenter",
"X Center",
units=units,
default=width / 2.0),
DialogFloat("yCenter",
"Y Center",
units=units,
default=length / 2.0),
DialogFloat("innerRadius",
"Inner radius",
units=units,
default=radius * 0.15,
min=0.0,
max=mRadius),
DialogFloat("outerRadius",
"Outer radius",
units=units,
default=radius,
min=1.0,
max=mRadius),
]