示例#1
0
def main():
    fpcuser = ""
    fpcpassword = ""
    if not fpcpassword and not fpcuser:
        d = Dialog('Insta-Snorby - First boot configuration')
	response = d.yesno("Enable OpenFPC?","Snorby supports intergration with OpenFPC, a lightweight full-packet network traffic recorder & buffering system.\nInsta-Snorby can install and configure OpenFPC so that full pcaps of alerts will be made available inside the Snorby application.\n\n Would you like to enable OpenFPC?")

	if response:
		fpcuser = d.inputbox("Create OpenFPC Username","Please enter your desired OpenFPC username.")
		fpcpassword = d.get_password("Create OpenFPC password", "Please enter your desired OpenFPC password.")
 	

    if fpcuser and fpcpassword:
	ipaddress = get_ip_address('eth0')
	d.infobox('Installing OpenFPC 0.6-314')
	system('htpasswd -b -c /etc/openfpc/apache2.passwd %s %s > /dev/null' % (fpcuser[1], fpcpassword) )
	system('cd /root/openfpc-0.6-314/ &&  /root/openfpc-0.6-314/openfpc-install.sh install > /dev/null')
	system("sed -i 's/GUIUSER=openfpc/#GUIUSER=openfpc/g' /etc/openfpc/openfpc-default.conf")
	system("sed -i 's/GUIPASS=openfpc/#GUIUSER=openfpc/g' /etc/openfpc/openfpc-default.conf")
	system("sed -i 's/USER=openfpc=openfpc/USER=%s=%s/g' /etc/openfpc/openfpc-default.conf" % (fpcuser[1], fpcpassword))
	system("sed -i 's/AuthType Basic/#AuthType Basic/g' /etc/apache2/sites-enabled/openfpc.apache2.site")
	system("sed -i 's/AuthName/#AuthName/g' /etc/apache2/sites-enabled/openfpc.apache2.site")
	system("sed -i 's/AuthUserFile/#AuthUserFile/g' /etc/apache2/sites-enabled/openfpc.apache2.site")
	system("sed -i 's/Require valid-user/#Require valid-user/g' /etc/apache2/sites-enabled/openfpc.apache2.site")
	d.infobox('Starting OpenFPC 0.6-314')
	system("openfpc -action start > /dev/null")
	d.infobox('Configuring Snorby...')
	system("cd /var/www/snorby && /usr/local/bin/rails runner 'Setting.set(:packet_capture, 1)' > /dev/null 2>&1")
	system("cd /var/www/snorby && /usr/local/bin/rails runner \"Setting.set(:packet_capture_url, 'https://%s/openfpc/cgi-bin/extract.cgi')\" > /dev/null 2>&1" % ipaddress)
	system("cd /var/www/snorby && /usr/local/bin/rails runner \"Setting.set(:packet_capture_type, 'openfpc')\" > /dev/null 2>&1")
        system("cd /var/www/snorby && /usr/local/bin/rails runner 'Setting.set(:packet_capture_auto_auth, 1)' > /dev/null 2>&1")
	system("cd /var/www/snorby && /usr/local/bin/rails runner \"Setting.set(:packet_capture_user, '%s')\" > /dev/null 2>&1" % fpcuser[1])
	system("cd /var/www/snorby && /usr/local/bin/rails runner \"Setting.set(:packet_capture_password, '%s')\" > /dev/null 2>&1" % fpcpassword)
def main():

    # ensure virtuoso is using new ini file
    # os.system('service virtuoso-opensource-6.1 restart')

    d = Dialog("TurnKey Linux - First boot configuration")
    eldis = d.yesno("ELDIS data", "Mirror ELDIS data on this server, this will take some time.")

    r4d = d.yesno("R4D data", "Mirror R4D data on this server, this will take some time.")

    if eldis:
        eldis_setup()

    if r4d:
        r4d_setup()
示例#3
0
def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h", ['help', 'pass='******'-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Trac Password",
            "Enter new password for the Trac 'admin' account.")
        subprocess.run(["htpasswd", "-cb", "/etc/trac/htpasswd",
                        "admin", "%s" % password])
示例#4
0
def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h", ['help', 'pass='******'-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password("Mumble Server SuperUser Password",
                                  "Enter SuperUser Password.")

    subprocess.run(
        ['murmurd', '-ini', '/etc/mumble-server.ini', '-supw', password])
    subprocess.run(['service', 'mumble-server', 'restart'])
示例#5
0
def main():
    signal.signal(signal.SIGINT, signal.SIG_IGN)
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h", ['help'])
    except getopt.GetoptError as e:
        usage(e)

    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()

    d = Dialog("TurnKey GNU/Linux - First boot configuration")
    install = d.yesno("Security updates", TEXT, "Install", "Skip")

    if not install:
        sys.exit(1)

    try:
        check_output(["host", "-W", "2", "archive.turnkeylinux.org"])
    except CalledProcessError as e:
        d.error(CONNECTIVITY_ERROR)
        sys.exit(1)
示例#6
0
def main():
    signal.signal(signal.SIGINT, signal.SIG_IGN)
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "hp:", ['help', 'pass='******'-h', '--help'):
            usage()
        elif opt in ('-p', '--pass'):
            password = val

    if not password:
        from dialog_wrapper import Dialog
        d = Dialog('TurnKey GNU/Linux - First boot configuration')
        password = d.get_password(
            "%s Password" % username.capitalize(),
            "Please enter new password for the %s account." % username)

    err = subprocess.run(
        ['chpasswd'],
        input = f'{username}:{password}\n',
        text = True,
    ).returncode
    if err:
        fatal(err)

    subprocess.run(
        ['smbpasswd', '-a', '-s', username],
        input = f'{password}\n{password}\n',
        text = True
    )
示例#7
0
def main():
    signal.signal(signal.SIGINT, signal.SIG_IGN)
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h", ['help', 'pass='******'-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Tomcat Password",
            "Enter new password for the Tomcat 'admin' account.")

    tomcat_user_conf = f"/etc/{TOMCAT}/tomcat-users.xml"
    doc = xml.dom.minidom.parse(tomcat_user_conf).documentElement
    users = doc.getElementsByTagName('user')
    for user in users:
        if not user.getAttribute('username') == 'admin':
            continue
        user.setAttribute('password', password)

    with open(tomcat_user_conf, 'w') as fob:
        fob.write("<?xml version='1.0' encoding='utf-8'?>\n")
        doc.writexml(fob)
        fob.write("\n")

    # restart tomcat if running so password change will take effect
    tomcat_status = ['systemctl', '-q', 'is-active', f'{TOMCAT}.service']
    tomcat_stopped = subprocess.run(tomcat_status).returncode
    if not tomcat_stopped:
        subprocess.run(['systemctl', 'restart', f'{TOMCAT}.service'])
示例#8
0
def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h", ['help', 'pass='******'-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Zoneminder Password",
            "Enter new password for the Zoneminder 'admin' account.")

    m = MySQL()
    m.execute(
        'UPDATE zm.Users SET Password=PASSWORD(%s) WHERE Username=\"admin\";',
        (password, ))
示例#9
0
def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h",
                                       ['help', 'pass='******'-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Mumble Ice Secret Write For ICE Administration",
            "Enter icesecretwrite.")
    
        subprocess.run(['sed', '-i', "s/.*icesecretwrite=.*/icesecretwrite=%s/g" % password, '/etc/mumble-server.ini'])

    for i in ('mumble-server', 'apache2'):
        subprocess.run(['service', i, 'restart'])
示例#10
0
def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h",
                                       ['help', 'pass='******'email='])
    except getopt.GetoptError as e:
        usage(e)

    password = ""
    email = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Foodsoft Password",
            "Enter new password for the Foodsoft 'admin' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "Foodsoft Email",
            "Enter email address for the Foodsoft 'admin' account.",
            "*****@*****.**")

    inithooks_cache.write('APP_EMAIL', email)

    print("Please wait ...")

    # need mysql running for these updates
    popen('service mysql status >/dev/null || service mysql start').wait()

    # initialize admin account from Rails console

    runner_script = """ "
       u = User.where(id: 1).first;
       u.password = '******';
       u.email = '%s';
       u.save! " """ % (password, email)

    popen("bundle exec rails r %s" % runner_script).wait()

    # running as root may have cached classes
    popen('chown -R www-data:www-data tmp/').wait()

    popen('systemctl restart apache2')
示例#11
0
def main():
    response = ""
    if not response:
        d = Dialog('Insta-Snorby - First boot configuration')
	response = d.yesno("Automatically Update Rules Everyday?","Snorby can update the configured ruleset on a daily basis. Snorby supports this through intergration with Pulled Pork, a simple popular Snort rule update script\n\nEnable Pulled Pork?")

	if response:
		d.infobox('Configuring Pulled Pork to run everyday at 2:00AM local time')
		system("crontab -l > /root/crontmp")
		system("echo '0 2 * * * /root/pulledpork-0.6.1/pulledpork.pl -c /root/pulledpork-0.6.1/etc/pulledpork.conf -H -v >> /var/log/pulledpork 2>&1 #Update Snort Rules' >> /root/crontmp")
		system("crontab /root/crontmp")

		d.infobox('Running Pulled Pork now! Logs are stored at /var/log/pulledpork')
		system("/root/pulledpork-0.6.1/pulledpork.pl -c /root/pulledpork-0.6.1/etc/pulledpork.conf -H -v >> /var/log/pulledpork 2>&1")
示例#12
0
def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h",
                                       ['help', 'pass='******'domain='])
    except getopt.GetoptError as e:
        usage(e)

    password = ""
    domain = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--domain':
            domain = val

    if not password:
        d = Dialog('TurnKey GNU/Linux - First boot configuration')
        password = d.get_password(
            "Nextcloud Password",
            "Enter new password for the Nextcloud 'admin' account.")

    if not domain:
        if 'd' not in locals():
            d = Dialog('TurnKey GNU/Linux - First boot configuration')

        domain = d.get_input("Nextcloud Domain",
                             "Enter the domain to serve Nextcloud.",
                             DEFAULT_DOMAIN)

    if domain == "DEFAULT":
        domain = DEFAULT_DOMAIN

    sedcom = """
        /0 => 'localhost',/ a\
    1 => '%s',
    """

    conf = '/var/www/nextcloud/config/config.php'
    call(['sed', '-i', "/1 => /d", conf])
    call(['sed', '-i', sedcom % domain, conf])

    call([
        '/usr/local/bin/turnkey-occ', 'user:resetpassword',
        '--password-from-env', 'admin'
    ],
         cwd='/var/www/nextcloud',
         env={"OC_PASS": password})
示例#13
0
def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h",
                                       ['help', 'pass='******'email='])
    except getopt.GetoptError as e:
        usage(e)

    password = ""
    email = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Redmine Password",
            "Enter new password for the Redmine 'admin' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "Redmine Email",
            "Enter email address for the Redmine 'admin' account.",
            "*****@*****.**")

    inithooks_cache.write('APP_EMAIL', email)

    salt = "".join(random.choice(string.ascii_letters) for line in range(16))
    pw_with_salt = salt + hashlib.sha1(password.encode('utf-8')).hexdigest()
    hashpass = hashlib.sha1(pw_with_salt.encode('utf-8')).hexdigest()
    user_id = 1

    m = MySQL()
    m.execute(
        'UPDATE redmine_production.email_addresses SET address=\"%s\" WHERE user_id=%i;'
        % (email, user_id))
    m.execute(
        'UPDATE redmine_production.users SET salt=\"%s\" WHERE login=\"admin\" AND id=%i;'
        % (salt, user_id))
    m.execute(
        'UPDATE redmine_production.users SET hashed_password=\"%s\" WHERE login=\"admin\" AND id = %i;'
        % (hashpass, user_id))
示例#14
0
def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h",
                                       ['help', 'pass='******'email='])
    except getopt.GetoptError as e:
        usage(e)

    password = ""
    email = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Joomla Password",
            "Enter new password for the Joomla 'admin' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "Joomla Email",
            "Enter email address for the Joomla 'admin' account.",
            "*****@*****.**")

    inithooks_cache.write('APP_EMAIL', email)

    salt_chars = string.ascii_letters + string.digits
    salt = "".join(random.choice(salt_chars) for c in range(32))
    cryptpass = "******" % (hashlib.md5(
        (password + salt).encode('utf8')).hexdigest(), salt)

    m = MySQL()
    m.execute('UPDATE joomla.jos_users SET email=%s WHERE username=\"admin\";',
              (email, ))
    m.execute(
        'UPDATE joomla.jos_users SET password=%s WHERE username=\"admin\";',
        (cryptpass, ))
示例#15
0
def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h",
                                       ['help', 'pass='******'domain='])
    except getopt.GetoptError as e:
        usage(e)

    password = ""
    domain = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--domain':
            domain = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "SuiteCRM Password",
            "Enter new password for the SuiteCRM 'admin' account.")

    if not domain:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        domain = d.get_input(
            "SuiteCRM Domain",
            "Enter the domain to serve SuiteCRM.",
            DEFAULT_DOMAIN)

    if domain == "DEFAULT":
        domain = DEFAULT_DOMAIN

    with open('/var/www/suitecrm/config.php', 'r') as fob:
        filedata = fob.read()
        filedata = filedata.replace('http://127.0.0.1', domain)
    with open('/var/www/suitecrm/config.php', 'w') as fob:
        fob.write(filedata)

    hash_pass = hashlib.md5(password.encode('utf8')).hexdigest()

    m = MySQL()
    m.execute('UPDATE suitecrm.users SET user_hash=%s WHERE user_name=\"admin\";', (hash_pass,))
示例#16
0
def main():
    signal.signal(signal.SIGINT, signal.SIG_IGN)
    try:
        l_opts = ["help", "email=", "email-placeholder="]
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h", l_opts)
    except getopt.GetoptError as e:
        usage(e)

    email = ""
    email_placeholder = ""
    for opt, val in opts:
        if opt in ("-h", "--help"):
            usage()
        elif opt == "--email":
            email = val
        elif opt == "--email-placeholder":
            email_placeholder = val

    if email and not email_re.match(email):
        fatal("email is not valid")

    if not email:
        d = Dialog("TurnKey Linux - First boot configuration")
        email = email_placeholder
        while 1:
            retcode, email = d.inputbox(TITLE, TEXT, email, "Enable", "Skip")

            dia_log(("secalerts.main():\n\tretcode:`{}'\n\temail:`{}'").format(
                retcode, email))
            if retcode == 'cancel':
                email = ""
                break

            if not email_re.match(email):
                d.error('Email is not valid')
                continue

            if d.yesno("Is your email correct?", email):
                break

    if email:
        cmd = os.path.join(os.path.dirname(__file__), 'secalerts.sh')
        dia_log("\tcmd:`{}'".format(cmd))
        subprocess.run([cmd, email], check=True)
示例#17
0
def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h",
                                       ['help', 'pass='******'email='])
    except getopt.GetoptError as e:
        usage(e)

    email = ""
    password = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "GNU social Password",
            "Enter new password for the GNU Social 'administrator' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "GNU social Email",
            "Please enter email address for the GNU Social 'administrator' account.",
            "*****@*****.**")

    inithooks_cache.write('APP_EMAIL', email)

    hashpass = crypt.crypt(password, crypt.METHOD_SHA512)

    m = MySQL()
    m.execute(
        'UPDATE gnusocial.user SET email=%s WHERE nickname=\"administrator\";',
        (email, ))
    m.execute(
        'UPDATE gnusocial.user SET password=%s WHERE nickname=\"administrator\";',
        (hashpass, ))
示例#18
0
def main():
    response = ""
    if not response:
        d = Dialog('Insta-Snorby - First boot configuration')
        response = d.yesno(
            "Automatically Update Rules Everyday?",
            "Snorby can update the configured ruleset on a daily basis. Snorby supports this through intergration with Pulled Pork, a simple popular Snort rule update script\n\nEnable Pulled Pork?"
        )

        if response:
            d.infobox(
                'Configuring Pulled Pork to run everyday at 2:00AM local time')
            system("crontab -l > /root/crontmp")
            system(
                "echo '0 2 * * * /root/pulledpork-0.6.1/pulledpork.pl -c /root/pulledpork-0.6.1/etc/pulledpork.conf -H -v >> /var/log/pulledpork 2>&1 #Update Snort Rules' >> /root/crontmp"
            )
            system("crontab /root/crontmp")

            d.infobox(
                'Running Pulled Pork now! Logs are stored at /var/log/pulledpork'
            )
            system(
                "/root/pulledpork-0.6.1/pulledpork.pl -c /root/pulledpork-0.6.1/etc/pulledpork.conf -H -v >> /var/log/pulledpork 2>&1"
            )
示例#19
0
def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h",
                                       ['help', 'pass='******'email='])
    except getopt.GetoptError as e:
        usage(e)

    password = ""
    email = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Mantis Password",
            "Enter new password for the Mantis 'admin' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "Mantis Email",
            "Enter email address for the Mantis 'admin' account.",
            "*****@*****.**")

    hashpass = hashlib.md5(password.encode('utf8')).hexdigest()

    m = MySQL()
    m.execute(
        'UPDATE mantis.mantis_user_table SET email=%s WHERE username=\"admin\";',
        (email, ))
    m.execute(
        'UPDATE mantis.mantis_user_table SET password=%s WHERE username=\"admin\";',
        (hashpass, ))
示例#20
0
def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h",
                                       ['help', 'pass='******'email='])
    except getopt.GetoptError as e:
        usage(e)

    email = ""
    password = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Bagisto Password",
            "Enter new password for the Bagisto 'admin' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "Bagisto Email",
            "Enter email address for the Bagisto 'admin' account.",
            "*****@*****.**")

    inithooks_cache.write('APP_EMAIL', email)

    salt = bcrypt.gensalt()
    hashpass = bcrypt.hashpw(password.encode('utf8'), salt).decode('utf8')

    m = MySQL()
    m.execute('UPDATE bagisto.admins SET password=%s WHERE id=1;',
              (hashpass, ))
    m.execute('UPDATE bagisto.admins SET email=%s WHERE id=1;', (email, ))
示例#21
0
def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h",
                                       ['help', 'pass='******'email='])
    except getopt.GetoptError as e:
        usage(e)

    password = ""
    email = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Wordpress Password",
            "Enter new password for the Wordpress 'admin' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "Wordpress Email",
            "Please enter email address for the Wordpress 'admin' account.",
            "*****@*****.**")

    inithooks_cache.write('APP_EMAIL', email)
    
    hashpass = hashlib.md5(password.encode('utf8')).hexdigest()

    m = MySQL()
    m.execute('UPDATE wordpress.wp_users SET user_email=\"%s\" WHERE user_nicename=\"admin\";' % email)
    m.execute('UPDATE wordpress.wp_users SET user_pass=\"%s\" WHERE user_nicename=\"admin\";' % hashpass)
示例#22
0
def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h",
                                       ['help', 'pass='******'domain='])
    except getopt.GetoptError as e:
        usage(e)

    domain = ""
    password = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--domain':
            domain = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "OpenLDAP Password",
            "Enter new password for the OpenLDAP 'admin' account.")

    if not domain:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        domain = d.get_input("OpenLDAP Domain", "Enter the OpenLDAP domain.",
                             DEFAULT_DOMAIN)

    if domain == "DEFAULT":
        domain = DEFAULT_DOMAIN

    inithooks_cache.write('APP_DOMAIN', domain)

    script = os.path.join(os.path.dirname(__file__), 'openldap-reinit.sh')
    subprocess.check_output([script, domain, password])
示例#23
0
        elif opt == '--apikey':
            apikey = val
        elif opt == '--fqdn':
            fqdn = val

    if apikey:
        system('tklbam-init', apikey)

        if fqdn:
            system('hubdns-init', apikey, fqdn)
            system('hubdns-update')

        return

    initialized_tklbam = False
    d = Dialog('TurnKey Linux - First boot configuration')
    while 1:
        retcode, apikey = d.inputbox("Initialize Hub services", TEXT_SERVICES,
                                     apikey, "Apply", "Skip")

        if not apikey or retcode == 1:
            break

        d.infobox("Linking TKLBAM to the TurnKey Hub...")

        try:
            getoutput("host -W 2 hub.turnkeylinux.org")
        except ExecError, e:
            d.error(CONNECTIVITY_ERROR)
            break
示例#24
0
    redirect_client_gateway = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--profile':
            profile = val
        elif opt == '--key-email':
            key_email = val
        elif opt == '--public-address':
            public_address = val
        elif opt == '--virtual-subnet':
            virtual_subnet = val
        elif opt == '--private-subnet':
            private_subnet = val

    dialog = Dialog('TurnKey Linux - First boot configuration')

    if not profile:
        profile = dialog.menu(
            "OpenVPN Profile",
            "Choose a profile for this server.\n\n* Gateway: clients will be configured to route all\n  their traffic through the VPN.",
            [
                ('server', 'Accept VPN connections from clients'),
                ('gateway', 'Accept VPN connections from clients*'),
                ('client', 'Initiate VPN connections to a server')
            ])

    if not profile in ('server', 'gateway', 'client'):
        fatal('invalid profile: %s' % profile)

    if profile == "client":
示例#25
0
def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h", ['help', 'pass='******'-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "CouchDB Password",
            "Enter new password for the CouchDB 'admin' account.")

    salt = str(uuid4()).replace('-', '')
    hash = hashlib.sha1(password + salt).hexdigest()
    hashpass = "******" % (hash, salt)

    conf = "/etc/couchdb/local.ini"
    system("sed -i \"s|^admin =.*|admin = %s|\" %s" % (hashpass, conf))

    # restart couchdb if running so change takes effect
    try:
        system("/etc/init.d/couchdb status >/dev/null 2>&1")
        system("/etc/init.d/couchdb restart")
示例#26
0
        elif opt == '--pass':
            admin_password = val
        elif opt == '--realm':
            realm = val
            DEFAULT_DOMAIN = realm.split('.')[0].upper()
        elif opt == '--domain':
            domain = val
        elif opt == '--join':
            join = val
        elif opt == '--join_ns':
            join_nameserver = val

    while 1:

        if not join:
            d = Dialog('Turnkey Linux - First boot configuration')
            join = d.yesno(
                "Join existing AD?",
                "You can create the Active Directory or join existing.",
                "Join", "Create")

        if not realm:
            d = Dialog('Turnkey Linux - First boot configuration')
            realm = d.get_input("Samba/Kerberos Realm",
                                "Enter realm you would like to use.",
                                DEFAULT_REALM)
            DEFAULT_DOMAIN = realm.split('.')[0].upper()

        if not domain:
            d = Dialog('TurnKey Linux - First boot configuration')
            domain = d.get_input("Samba Domain",
示例#27
0
                                       ['help', 'pass='******'email='])
    except getopt.GetoptError, e:
        usage(e)

    email = ""
    password = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "GNU social Password",
            "Enter new password for the GNU Social 'administrator' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "GNU social Email",
            "Please enter email address for the GNU Social 'administrator' account.",
            "*****@*****.**")

    inithooks_cache.write('APP_EMAIL', email)
示例#28
0
    email = ""
    domain = ""
    password = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val
        elif opt == '--domain':
            domain = val

    if not email:
        d = Dialog('TurnKey Linux - First boot configuration')
        email = d.get_email(
            "PrestaShop Email",
            "Enter email address for the PrestaShop 'admin' account.",
            "*****@*****.**")

    inithooks_cache.write('APP_EMAIL', email)

    if not password:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        password = d.get_password(
            "PrestaShop Password",
            "Enter new password for the PrestaShop '%s' account." % email,
            pass_req=8)
示例#29
0
def usage(e=None):
    if e:
        print >> sys.stderr, "Error:", e
    print >> sys.stderr, "Syntax: %s" % sys.argv[0]
    print >> sys.stderr, __doc__
    sys.exit(1)

def main():
    try:
        #note none used at present
        opts, args = getopt.gnu_getopt(sys.argv[1:], "hp:", ['help', 'pass='******'TurnKey Linux - First boot configuration')
    password = d.get_password(
        "",
        "Please enter new password for the virtuoso.")

    f = open('/usr/lib/inithooks/firstboot.d/setpass', 'w')
    isql = """set password "dba" \"""" + password + """\";
update DB.DBA.SYS_USERS set U_PASSWORD='******' where U_NAME='dav';
exit;"""
    f.write(isql)
    f.close()
    
    #open default conection to isql and run commands in a file
    command = "isql-vt 1111 dba dba /usr/lib/inithooks/firstboot.d/setpass > /root/setpass"
    os.system(command)
    #os.system('rm -f /usr/lib/inithooks/firstboot.d/setpass')
示例#30
0
    sys.exit(1)


def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "hp:", ['help', 'pass='******'-h', '--help'):
            usage()
        elif opt in ('-p', '--pass'):
            password = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password("Torrent Server Password",
                                  "Enter new admin password for MLDonkey.")

    command = ["/usr/local/bin/mldonkey-config", password]
    p = subprocess.Popen(command, stdin=PIPE, stdout=PIPE, shell=False)
    stderr = p.wait()
    if stderr:
        fatal(stderr)


if __name__ == "__main__":
    main()
示例#31
0
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "hp:", ['help', 'pass='******'-h', '--help'):
            usage()
        elif opt in ('-p', '--pass'):
            password = val

    if not password:
        from dialog_wrapper import Dialog
        d = Dialog('TurnKey GNU/Linux - First boot configuration')
        password = d.get_password(
            "%s Samba Password" % username.capitalize(),
            "Please enter new password for the Samba {0} account. Note: the Linux {0}"
            .format(username) + " user password will NOT be changed.")

    system("(echo \"{0}\" ; echo \"{0}\" ) | smbpasswd -a -s {1}".format(
        password, username))


if __name__ == "__main__":
    main()
示例#32
0
    except getopt.GetoptError, e:
        usage(e)

    password = ""
    email = ""

    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Zoneminder Password",
            "Enter new password for the Zoneminder 'admin' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "Zoneminder Email",
            "Enter email address for the Zoneminder alerts.",

            "*****@*****.**")

    inithooks_cache.write('APP_EMAIL', email)
示例#33
0
    except getopt.GetoptError, e:
        usage(e)

    if len(args) != 1:
        usage()

    username = args[0]
    password = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt in ('-p', '--pass'):
            password = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "%s Password" % username.capitalize(),
            "Please enter new password for the %s account." % username)

    command = ["chpasswd"]
    input = ":".join([username, password])

    p = subprocess.Popen(command, stdin=PIPE, shell=False)
    p.stdin.write(input)
    p.stdin.close()
    err = p.wait()
    if err:
        fatal(err)
    """use ssh-keygen to create an rsa key pair using the same password"""
    subprocess.call([
示例#34
0
                                       ['help', 'pass='******'email='])
    except getopt.GetoptError, e:
        usage(e)

    password = ""
    email = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "TomatoCart Password",
            "Enter new password for the 'admin' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email("TomatoCart Email",
                            "Enter email address for the 'admin' account.",
                            "*****@*****.**")

    salt = ''.join(
        (random.choice(string.letters + string.digits) for x in range(2)))
    hash = ':'.join([hashlib.md5(salt + password).hexdigest(), salt])
                                       ['help', 'pass='******'domain='])
    except getopt.GetoptError, e:
        usage(e)

    domain = ""
    password = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--domain':
            domain = val

    if not domain:
        d = Dialog('TurnKey Linux - First boot configuration')
        domain = d.get_input(
            "Samba Domain",
            "Enter domain you would like to use.",
            DEFAULT_DOMAIN)

    if not password:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        password = d.get_password(
            "Samba Password",
            "Enter new password for the samba 'administrator' account.")

    system("/etc/init.d/samba stop >/dev/null || true")
示例#36
0
    server = ""
    password = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--server':
            server = val
        elif opt == '--base':
            ldap_base = val
        elif opt == '--binddn':
            ldap_user = val

    if not ldap_base:
        d = Dialog('TurnKey Linux - First boot configuration')

        ldap_base = d.get_input(
            "LDAP Base",
            "Enter the LDAP Base DN.",
            DEFAULT_BASE)

    if ldap_base == "DEFAULT":
        ldap_base = DEFAULT_BASE

    if not ldap_user:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        ldap_user = d.get_input(
            "LDAP User",
示例#37
0
    email = ""
    domain = ""
    password = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val
        elif opt == '--domain':
            domain = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "iceScrum Password",
            "Enter new password for the iceScrum 'admin' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "iceScrum Email",
            "Enter email address for the iceScrum 'admin' account.",
            "*****@*****.**")

    if not domain:
        if 'd' not in locals():
示例#38
0
def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h",
                                       ['help', 'pass='******'-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "CouchDB Password",
            "Enter new password for the CouchDB 'admin' account.")

    salt = str(uuid4()).replace('-', '')
    hash = hashlib.sha1(password + salt).hexdigest()
    hashpass = "******" % (hash, salt)

    conf = "/etc/couchdb/local.ini"
    system("sed -i \"s|^admin =.*|admin = %s|\" %s" % (hashpass, conf))

    # restart couchdb if running so change takes effect
    try:
        system("systemctl is-active --quiet couchdb.service")
        system("service couchdb restart")
示例#39
0
文件: espocrm.py 项目: AlexAv/espocrm
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h",
                                       ['help', 'domain='])
    except getopt.GetoptError, e:
        usage(e)

    domain = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--domain':
            domain = val


    if not domain:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        domain = d.get_input(
            "EspoCRM URL",
            "Example: www.mydomain.com or mydomain.com",
            DEFAULT_DOMAIN)

    if domain == "DEFAULT":
        domain = DEFAULT_DOMAIN



    conf = "/var/www/espocrm/data/config.php"
    system("sed -i \"s|siteUrl.*|siteUrl' => 'http://%s',|\" %s" % (domain, conf))

示例#40
0

def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "hp:", ['help', 'pass='******'-h', '--help'):
            usage()
        elif opt in ('-p', '--pass'):
            password = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password("Git Smart HTTP(S) Password",
                                  "Enter new admin password for git.")

    command = ['openssl', 'passwd', '-apr1', password]

    with open('/etc/apache2/htpasswd', 'w') as of:
        of.write('admin:')
        of.flush()
        subprocess.call(command, stdin=PIPE, stdout=of, shell=False)


if __name__ == "__main__":
    main()
示例#41
0
                                       ['help', 'pass='******'email='])
    except getopt.GetoptError, e:
        usage(e)

    password = ""
    email = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "ProjectPier Password",
            "Enter new password for the ProjectPier 'admin' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "ProjectPier Email",
            "Please enter email address for the ProjectPier 'admin' account.",
            "*****@*****.**")

    inithooks_cache.write('APP_EMAIL', email)
示例#42
0
文件: trac.py 项目: qrntz/trac
def usage(s=None):
    if s:
        print >>sys.stderr, "Error:", s
    print >>sys.stderr, "Syntax: %s [options]" % sys.argv[0]
    print >>sys.stderr, __doc__
    sys.exit(1)


def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h", ["help", "pass="******""
    for opt, val in opts:
        if opt in ("-h", "--help"):
            usage()
        elif opt == "--pass":
            password = val

    if not password:
        d = Dialog("TurnKey Linux - First boot configuration")
        password = d.get_password("Trac Password", "Enter new password for the Trac 'admin' account.")

    getoutput("htpasswd -cb /etc/trac/htpasswd admin %s" % password)


if __name__ == "__main__":
    main()
示例#43
0
                                       ['help', 'pass='******'email='])
    except getopt.GetoptError, e:
        usage(e)

    password = ""
    email = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Concrete5 Password",
            "Enter new password for the Concrete5 'admin' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "Concrete5 Email",
            "Enter email address for the Concrete5 'admin' account.",
            "*****@*****.**")

    inithooks_cache.write('APP_EMAIL', email)
示例#44
0
                                       ['help', 'pass='******'email='])
    except getopt.GetoptError, e:
        usage(e)

    password = ""
    email = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Collabtive Password",
            "Enter new password for the Collabtive 'admin' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "Collabtive Email",
            "Enter email address for the Collabtive 'admin' account.",
            "*****@*****.**")

    hash = hashlib.sha1(password).hexdigest()
示例#45
0
        elif opt in ('-p', '--pass'):
            rootpass = val
        elif opt in ('-r', '--rpass'):
            rounduppass = val
        elif opt in ('-s', '--sipass'):
            simpleinvoicespass = val
        elif opt in ('-t', '--tld'):
            tld = val
        elif opt in ('-u', '--user'):
            username = val
        elif opt in ('-z', '--zpass'):
            toolspass = val

    if not tld:
        sitename = ""
        d = Dialog('TurnKey Linux - First boot configuration')
        tld = d.get_input("Set tld (top level domain) in http://www.basesitename.TLD", "Please enter top level domain (tld) without a dot (e.g. com, org, net).")

    if not sitename:
        d = Dialog('TurnKey Linux - First boot configuration')
        sitename = d.get_input("Set base site name in http://www.BASESITENAME.%s" % tld, "Please enter base site name without 'http://www.' or '.%s'." % tld)
    
    lowername = sitename.replace(" ","").lower()
    tld = tld.lower()
    hostname = ".".join([lowername,tld])

    if not email:
        email = "@".join(['admin',hostname])

    # Set root password.
    if not username:
示例#46
0
                                       ['help', 'pass='******'email='])
    except getopt.GetoptError, e:
        usage(e)

    password = ""
    email = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Rhodecode Password",
            "Enter new password for the Rhodecode 'admin' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "Rhodecode Email",
            "Enter email address for the Rhodecode 'admin' account.",
            "*****@*****.**")
    
    # salt = "".join(random.choice(string.letters) for line in range(16))
    hashpass = bcrypt.hashpw(password, bcrypt.gensalt(10))
示例#47
0
                                       ['help', 'pass='******'email='])
    except getopt.GetoptError, e:
        usage(e)

    password = ""
    email = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "SimpleInvoices Password",
            "Enter new password for the 'admin' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "SimpleInvoices Email",
            "Enter email address for the 'admin' account.",
            "*****@*****.**")

    hash = hashlib.md5(password).hexdigest()
示例#48
0
        usage(e)

    if len(args) != 1:
        usage()

    username = args[0]
    password = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt in ('-p', '--pass'):
            password = val

    if not password:
        from dialog_wrapper import Dialog
        d = Dialog('TurnKey GNU/Linux - First boot configuration')
        password = d.get_password(
            "%s Password" % username.capitalize(),
            "Please enter new password for the %s account." % username)


    command = ["chpasswd"]
    input = ":".join([username, password])

    p = subprocess.Popen(command, stdin=PIPE, shell=False)
    p.stdin.write(input)
    p.stdin.close()
    err = p.wait()
    if err:
        fatal(err)
示例#49
0
    print >> sys.stderr, "Syntax: %s [options]" % sys.argv[0]
    print >> sys.stderr, __doc__
    sys.exit(1)

def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h",
                                       ['help', 'pass='******'-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val


    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Odoo Database Managment Screen Password",
            "Enter new database management screen password. This is used for Odoo database functions.")

    config = "/etc/odoo/openerp-server.conf"
    system("sed -i \"s|admin_passwd =.*|admin_passwd = \"%s\"|\" %s" % (password, config))

if __name__ == "__main__":
    main()
示例#50
0
    username="******"
    password=""
    queries=[]

    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt in ('-u', '--user'):
            username = val
        elif opt in ('-p', '--pass'):
            password = val
        elif opt in ('--query'):
            queries.append(val)

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "MySQL Password",
            "Please enter new password for the MySQL '%s' account." % username)

    m = MySQL()

    #Set Proxy URL
    m.execute('INSERT INTO psiphon.proxy (name, hostname, login_url) VALUES(\"%s\", \"%s\", \"%s\");' % (proxyname, hostname, login_url))
    
    # set password
    m.execute('update mysql.user set Password=PASSWORD(\"%s\") where User=\"%s\"; flush privileges;' % (escape_chars(password), username))

    # edge case: update DEBIAN_CNF
    if username == "debian-sys-maint":
        old = file(DEBIAN_CNF).read()
示例#51
0
                                       ['help', 'pass='******'email='])
    except getopt.GetoptError, e:
        usage(e)

    password = ""
    email = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Mahara Password",
            "Enter new password for the Mahara 'admin' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "Mahara Email",
            "Enter email address for the Mahara 'admin' account.",
            "*****@*****.**")

    sitesalt = ""
    for line in file("/var/www/mahara/config.php", "r").readlines():
示例#52
0
                                       ['help', 'pass='******'email='])
    except getopt.GetoptError, e:
        usage(e)

    password = ""
    email = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "PHPNuke Password",
            "Enter new password for the PHPNuke 'admin' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "PHPNuke Email",
            "Enter email address for the PHPNuke 'admin' account.",
            "*****@*****.**")

    hash = hashlib.md5(password).hexdigest()
示例#53
0
文件: mibew.py 项目: JedMeister/mibew
    print >> sys.stderr, "Syntax: %s [options]" % sys.argv[0]
    print >> sys.stderr, __doc__
    sys.exit(1)

def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h",
                                       ['help', 'pass='******'-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Mibew Password",
            "Enter new password for the Mibew 'admin' account.")

    system('/usr/lib/inithooks/bin/eddit_mibew_pass.sh -p {PASSWORD} '.format(PASSWORD = password))

if __name__ == "__main__":
    main()

示例#54
0
                                       ['help', 'pass='******'email='])
    except getopt.GetoptError, e:
        usage(e)

    password = ""
    email = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Kliqqi Password",
            "Enter new password for the Kliqqi 'admin' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "Kliqqi Email",
            "Enter email address for the Kliqqi 'admin' account.",
            "*****@*****.**")

    inithooks_cache.write('APP_EMAIL', email)
示例#55
0
文件: magento.py 项目: Drakas/magento
    email = ""
    domain = ""
    password = ""
    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val
        elif opt == '--email':
            email = val
        elif opt == '--domain':
            domain = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Magento Password",
            "Enter new password for the Magento 'admin' account.")

    if not email:
        if 'd' not in locals():
            d = Dialog('TurnKey Linux - First boot configuration')

        email = d.get_email(
            "Magento Email",
            "Enter email address for the Magento 'admin' account.",
            "*****@*****.**")
    
    if not domain:
        if 'd' not in locals():
示例#56
0
def main():
    try:
        opts, args = getopt.gnu_getopt(sys.argv[1:], "h", ['help', 'pass='******'-h', '--help'):
            usage()
        elif opt == '--pass':
            password = val

    if not password:
        d = Dialog('TurnKey Linux - First boot configuration')
        password = d.get_password(
            "Observium Password",
            "Enter new password for the Observium 'admin' account.")

    random = SystemRandom()
    salt = hashlib.sha1(str(random.random())).hexdigest()[:8]
    hash = crypt.crypt(password, "$1$" + salt + "$")

    m = MySQL()
    m.execute('UPDATE observium.users SET password=\"%s\" WHERE username=\"admin\";' % hash)


if __name__ == "__main__":
    main()
示例#57
0
                     ['help', 'email=', 'passw='])
    except getopt.GetoptError, e:
        usage(e)

    email=""
    passw=""

    for opt, val in opts:
        if opt in ('-h', '--help'):
            usage()
        elif opt == '--email':
            gmail_user = val
        elif opt == '--passw':
            gmail_pass = val

    d = Dialog('TurnKey B-Translator - First boot configuration')
    if not email:
        email = d.get_email(
            "Email of the gmail account",
            "Emails from the server are sent through the SMTP of a GMAIL account.\n" +
            "Please enter the full email of the gmail account:",
            "*****@*****.**")
    if not passw:
        passw = d.get_password(
            "Password of the gmail account",
            "Emails from the server are sent through the SMTP of a GMAIL account.\n" +
            "Please enter the password of the gmail account:")

    domain = email.split('@')[1]

    try: