def disassemble(self, co, classname=None):
"""
Disassemble a code object, returning a list of 'Token'.
The main part of this procedure is modelled after
dis.disassemble().
"""
rv = []
customize = {}
Token = self.Token # shortcut
self.code = array("B", co.co_code)
n = len(self.code)
# linestarts contains bloc code adresse (addr,block)
self.linestarts = list(dis.findlinestarts(co))
self.prev = [0]
# change jump struct
self.restructRelativeJump()
# class and names
if classname:
classname = "_" + classname.lstrip("_") + "__"
def unmangle(name):
if name.startswith(classname) and name[-2:] != "__":
return name[len(classname) - 2 :]
return name
free = [unmangle(name) for name in (co.co_cellvars + co.co_freevars)]
names = [unmangle(name) for name in co.co_names]
varnames = [unmangle(name) for name in co.co_varnames]
else:
free = co.co_cellvars + co.co_freevars
names = co.co_names
varnames = co.co_varnames
self.names = names
# add instruction to remonde in "toDel" list
toDel = []
# add instruction to change in "toChange" list
self.toChange = []
for i in self.op_range(0, n):
op = self.code[i]
ret = self.getOpcodeToDel(i)
if ret != None:
toDel += ret
if toDel: # degeu a revoir / repenser (tout faire d'un coup? chaud)
toDel = sorted(list(set(toDel)))
delta = 0
for x in toDel:
if self.code[x - delta] >= dis.HAVE_ARGUMENT:
self.code.pop(x - delta)
self.restructCode(x - delta)
self.code.pop(x - delta)
self.restructCode(x - delta)
self.code.pop(x - delta)
self.restructCode(x - delta)
delta += 3
else:
self.code.pop(x - delta)
self.restructCode(x - delta)
delta += 1
# mapping adresses of prev instru
n = len(self.code)
for i in self.op_range(0, n):
op = self.code[i]
self.prev.append(i)
if op >= HAVE_ARGUMENT:
self.prev.append(i)
self.prev.append(i)
j = 0
linestarts = self.linestarts
self.lines = []
linetuple = namedtuple("linetuple", ["l_no", "next"])
linestartoffsets = {a for (a, _) in linestarts}
(prev_start_byte, prev_line_no) = linestarts[0]
for (start_byte, line_no) in linestarts[1:]:
while j < start_byte:
self.lines.append(linetuple(prev_line_no, start_byte))
j += 1
last_op = self.code[self.prev[start_byte]]
(prev_start_byte, prev_line_no) = (start_byte, line_no)
while j < n:
self.lines.append(linetuple(prev_line_no, n))
j += 1
# self.lines contains (block,addrLastInstr)
cf = self.find_jump_targets(self.code)
# contains (code, [addrRefToCode])
last_stmt = self.next_stmt[0]
i = self.next_stmt[last_stmt]
replace = {}
while i < n - 1:
if self.lines[last_stmt].next > i:
if self.code[last_stmt] == PRINT_ITEM:
if self.code[i] == PRINT_ITEM:
replace[i] = "PRINT_ITEM_CONT"
elif self.code[i] == PRINT_NEWLINE:
replace[i] = "PRINT_NEWLINE_CONT"
last_stmt = i
i = self.next_stmt[i]
imports = self.all_instr(0, n, (IMPORT_NAME, IMPORT_FROM, IMPORT_STAR))
if len(imports) > 1:
last_import = imports[0]
for i in imports[1:]:
if self.lines[last_import].next > i:
if self.code[last_import] == IMPORT_NAME == self.code[i]:
replace[i] = "IMPORT_NAME_CONT"
last_import = i
extended_arg = 0
for offset in self.op_range(0, n):
op = self.code[offset]
opname = dis.opname[op]
oparg = None
pattr = None
if offset in cf:
k = 0
for j in cf[offset]:
rv.append(Token("COME_FROM", None, repr(j), offset="%s_%d" % (offset, k)))
k += 1
if op >= HAVE_ARGUMENT:
oparg = self.get_argument(offset) + extended_arg
extended_arg = 0
if op == dis.EXTENDED_ARG:
raise "TODO"
extended_arg = oparg * 65536L
continue
if op in dis.hasconst:
const = co.co_consts[oparg]
if type(const) == types.CodeType:
oparg = const
if const.co_name == "<lambda>":
assert opname == "LOAD_CONST"
opname = "LOAD_LAMBDA"
elif const.co_name == "<genexpr>":
opname = "LOAD_GENEXPR"
elif const.co_name == "<dictcomp>":
opname = "LOAD_DICTCOMP"
elif const.co_name == "<setcomp>":
opname = "LOAD_SETCOMP"
# verify uses 'pattr' for comparism, since 'attr'
# now holds Code(const) and thus can not be used
# for comparism (todo: think about changing this)
# pattr = 'code_object @ 0x%x %s->%s' %\
# (id(const), const.co_filename, const.co_name)
pattr = "<code_object " + const.co_name + ">"
else:
pattr = const
elif op in dis.hasname:
pattr = names[oparg]
elif op in dis.hasjrel:
pattr = repr(offset + 3 + oparg)
elif op in dis.hasjabs:
pattr = repr(oparg)
elif op in dis.haslocal:
pattr = varnames[oparg]
elif op in dis.hascompare:
pattr = dis.cmp_op[oparg]
elif op in dis.hasfree:
pattr = free[oparg]
if offset in self.toChange:
if self.code[offset] == JA and self.code[oparg] == WITH_CLEANUP:
opname = "SETUP_WITH"
cf[oparg] = cf.get(oparg, []) + [offset]
if op in (
BUILD_LIST,
BUILD_TUPLE,
BUILD_SLICE,
UNPACK_SEQUENCE,
MAKE_FUNCTION,
CALL_FUNCTION,
MAKE_CLOSURE,
CALL_FUNCTION_VAR,
CALL_FUNCTION_KW,
CALL_FUNCTION_VAR_KW,
DUP_TOPX,
):
# CE - Hack for >= 2.5
# Now all values loaded via LOAD_CLOSURE are packed into
# a tuple before calling MAKE_CLOSURE.
if op == BUILD_TUPLE and self.code[offset - 3] == LOAD_CLOSURE:
continue
else:
opname = "%s_%d" % (opname, oparg)
if op != BUILD_SLICE:
customize[opname] = oparg
elif op == JA:
target = self.get_target(offset)
if target < offset:
if (
offset in self.stmts
and self.code[offset + 3] not in (END_FINALLY, POP_BLOCK)
and offset not in self.not_continue
):
opname = "CONTINUE"
else:
opname = "JUMP_BACK"
elif op == LOAD_GLOBAL:
try:
if pattr == "AssertionError" and rv and rv[-1] == "JUMP_IF_TRUE":
opname = "LOAD_ASSERT"
except AttributeError:
pass
elif op == RETURN_VALUE:
if offset in self.return_end_ifs:
opname = "RETURN_END_IF"
if offset not in replace:
rv.append(Token(opname, oparg, pattr, offset, linestart=offset in linestartoffsets))
else:
rv.append(Token(replace[offset], oparg, pattr, offset, linestart=offset in linestartoffsets))
if self.showasm:
out = self.out # shortcut
for t in rv:
print >> out, t
print >> out
return rv, customize
def disassemble(self, co, classname=None):
'''
Disassemble a code object, returning a list of 'Token'.
The main part of this procedure is modelled after
dis.disassemble().
'''
rv = []
customize = {}
Token = self.Token # shortcut
self.code = array('B', co.co_code)
for i in self.op_range(0, len(self.code)):
if self.code[i] in (RETURN_VALUE, END_FINALLY):
n = i + 1
self.code = array('B', co.co_code[:n])
# linestarts contains bloc code adresse (addr,block)
self.linestarts = list(dis.findlinestarts(co))
self.prev = [0]
# class and names
if classname:
classname = '_' + classname.lstrip('_') + '__'
def unmangle(name):
if name.startswith(classname) and name[-2:] != '__':
return name[len(classname) - 2:]
return name
free = [ unmangle(name) for name in (co.co_cellvars + co.co_freevars) ]
names = [ unmangle(name) for name in co.co_names ]
varnames = [ unmangle(name) for name in co.co_varnames ]
else:
free = co.co_cellvars + co.co_freevars
names = co.co_names
varnames = co.co_varnames
self.names = names
# list of instruction to remove/add or change to match with bytecode 2.7
self.toChange = []
self.restructBytecode()
codelen = len(self.code)
# mapping adresses of prev instru
for i in self.op_range(0, codelen):
op = self.code[i]
self.prev.append(i)
if self.op_hasArgument(op):
self.prev.append(i)
self.prev.append(i)
j = 0
linestarts = self.linestarts
self.lines = []
linetuple = namedtuple('linetuple', ['l_no', 'next'])
linestartoffsets = {a for (a, _) in linestarts}
(prev_start_byte, prev_line_no) = linestarts[0]
for (start_byte, line_no) in linestarts[1:]:
while j < start_byte:
self.lines.append(linetuple(prev_line_no, start_byte))
j += 1
last_op = self.code[self.prev[start_byte]]
(prev_start_byte, prev_line_no) = (start_byte, line_no)
while j < codelen:
self.lines.append(linetuple(prev_line_no, codelen))
j+=1
# self.lines contains (block,addrLastInstr)
self.load_asserts = set()
for i in self.op_range(0, codelen):
if self.code[i] == PJIT and self.code[i+3] == LOAD_GLOBAL:
if names[self.get_argument(i+3)] == 'AssertionError':
self.load_asserts.add(i+3)
cf = self.find_jump_targets(self.code)
# contains (code, [addrRefToCode])
last_stmt = self.next_stmt[0]
i = self.next_stmt[last_stmt]
replace = {}
while i < codelen-1:
if self.lines[last_stmt].next > i:
if self.code[last_stmt] == PRINT_ITEM:
if self.code[i] == PRINT_ITEM:
replace[i] = 'PRINT_ITEM_CONT'
elif self.code[i] == PRINT_NEWLINE:
replace[i] = 'PRINT_NEWLINE_CONT'
last_stmt = i
i = self.next_stmt[i]
imports = self.all_instr(0, codelen, (IMPORT_NAME, IMPORT_FROM, IMPORT_STAR))
if len(imports) > 1:
last_import = imports[0]
for i in imports[1:]:
if self.lines[last_import].next > i:
if self.code[last_import] == IMPORT_NAME == self.code[i]:
replace[i] = 'IMPORT_NAME_CONT'
last_import = i
extended_arg = 0
for offset in self.op_range(0, codelen):
op = self.code[offset]
op_name = opname[op]
oparg = None; pattr = None
if offset in cf:
k = 0
for j in cf[offset]:
rv.append(Token('COME_FROM', None, repr(j),
offset="%s_%d" % (offset, k) ))
k += 1
if self.op_hasArgument(op):
oparg = self.get_argument(offset) + extended_arg
extended_arg = 0
if op == EXTENDED_ARG:
raise NotImplementedError
extended_arg = oparg * 65536L
continue
if op in hasconst:
const = co.co_consts[oparg]
if type(const) == types.CodeType:
oparg = const
if const.co_name == '<lambda>':
assert op_name == 'LOAD_CONST'
op_name = 'LOAD_LAMBDA'
elif const.co_name == '<genexpr>':
op_name = 'LOAD_GENEXPR'
elif const.co_name == '<dictcomp>':
op_name = 'LOAD_DICTCOMP'
elif const.co_name == '<setcomp>':
op_name = 'LOAD_SETCOMP'
# verify uses 'pattr' for comparism, since 'attr'
# now holds Code(const) and thus can not be used
# for comparism (todo: think about changing this)
#pattr = 'code_object @ 0x%x %s->%s' %\
# (id(const), const.co_filename, const.co_name)
pattr = '<code_object ' + const.co_name + '>'
else:
pattr = const
elif op in hasname:
pattr = names[oparg]
elif op in hasjrel:
pattr = repr(offset + 3 + oparg)
elif op in hasjabs:
pattr = repr(oparg)
elif op in haslocal:
pattr = varnames[oparg]
elif op in hascompare:
pattr = cmp_op[oparg]
elif op in hasfree:
pattr = free[oparg]
if offset in self.toChange:
if self.code[offset] == JA and self.code[oparg] == WITH_CLEANUP:
op_name = 'SETUP_WITH'
cf[oparg] = cf.get(oparg, []) + [offset]
if op in (BUILD_LIST, BUILD_TUPLE, BUILD_SLICE,
UNPACK_SEQUENCE,
MAKE_FUNCTION, CALL_FUNCTION, MAKE_CLOSURE,
CALL_FUNCTION_VAR, CALL_FUNCTION_KW,
CALL_FUNCTION_VAR_KW, DUP_TOPX, RAISE_VARARGS
):
# CE - Hack for >= 2.5
# Now all values loaded via LOAD_CLOSURE are packed into
# a tuple before calling MAKE_CLOSURE.
if op == BUILD_TUPLE and \
self.code[self.prev[offset]] == LOAD_CLOSURE:
continue
else:
op_name = '%s_%d' % (op_name, oparg)
if op != BUILD_SLICE:
customize[op_name] = oparg
elif op == JA:
target = self.get_target(offset)
if target < offset:
if offset in self.stmts and self.code[offset+3] not in (END_FINALLY, POP_BLOCK) \
and offset not in self.not_continue:
op_name = 'CONTINUE'
else:
op_name = 'JUMP_BACK'
elif op == LOAD_GLOBAL:
if offset in self.load_asserts:
op_name = 'LOAD_ASSERT'
elif op == RETURN_VALUE:
if offset in self.return_end_ifs:
op_name = 'RETURN_END_IF'
if offset not in replace:
rv.append(Token(op_name, oparg, pattr, offset, linestart = offset in linestartoffsets))
else:
rv.append(Token(replace[offset], oparg, pattr, offset, linestart = offset in linestartoffsets))
if self.showasm:
out = self.out # shortcut
for t in rv:
print >>out, t
print >>out
return rv, customize
def disassemble(self, co, classname=None):
'''
Disassemble a code object, returning a list of 'Token'.
The main part of this procedure is modelled after
dis.disassemble().
'''
rv = []
customize = {}
Token = self.Token # shortcut
self.code = array('B', co.co_code)
for i in self.op_range(0, len(self.code)):
if self.code[i] in (RETURN_VALUE, END_FINALLY):
n = i + 1
self.code = array('B', co.co_code[:n])
# linestarts contains bloc code adresse (addr,block)
self.linestarts = list(dis.findlinestarts(co))
self.prev = [0]
# class and names
if classname:
classname = '_' + classname.lstrip('_') + '__'
def unmangle(name):
if name.startswith(classname) and name[-2:] != '__':
return name[len(classname) - 2:]
return name
free = [
unmangle(name) for name in (co.co_cellvars + co.co_freevars)
]
names = [unmangle(name) for name in co.co_names]
varnames = [unmangle(name) for name in co.co_varnames]
else:
free = co.co_cellvars + co.co_freevars
names = co.co_names
varnames = co.co_varnames
self.names = names
# list of instruction to remove/add or change to match with bytecode 2.7
self.toChange = []
self.restructBytecode()
codelen = len(self.code)
# mapping adresses of prev instru
for i in self.op_range(0, codelen):
op = self.code[i]
self.prev.append(i)
if self.op_hasArgument(op):
self.prev.append(i)
self.prev.append(i)
j = 0
linestarts = self.linestarts
self.lines = []
linetuple = namedtuple('linetuple', ['l_no', 'next'])
linestartoffsets = {a for (a, _) in linestarts}
(prev_start_byte, prev_line_no) = linestarts[0]
for (start_byte, line_no) in linestarts[1:]:
while j < start_byte:
self.lines.append(linetuple(prev_line_no, start_byte))
j += 1
last_op = self.code[self.prev[start_byte]]
(prev_start_byte, prev_line_no) = (start_byte, line_no)
while j < codelen:
self.lines.append(linetuple(prev_line_no, codelen))
j += 1
# self.lines contains (block,addrLastInstr)
self.load_asserts = set()
for i in self.op_range(0, codelen):
if self.code[i] == PJIT and self.code[i + 3] == LOAD_GLOBAL:
if names[self.get_argument(i + 3)] == 'AssertionError':
self.load_asserts.add(i + 3)
cf = self.find_jump_targets(self.code)
# contains (code, [addrRefToCode])
last_stmt = self.next_stmt[0]
i = self.next_stmt[last_stmt]
replace = {}
while i < codelen - 1:
if self.lines[last_stmt].next > i:
if self.code[last_stmt] == PRINT_ITEM:
if self.code[i] == PRINT_ITEM:
replace[i] = 'PRINT_ITEM_CONT'
elif self.code[i] == PRINT_NEWLINE:
replace[i] = 'PRINT_NEWLINE_CONT'
last_stmt = i
i = self.next_stmt[i]
imports = self.all_instr(0, codelen,
(IMPORT_NAME, IMPORT_FROM, IMPORT_STAR))
if len(imports) > 1:
last_import = imports[0]
for i in imports[1:]:
if self.lines[last_import].next > i:
if self.code[last_import] == IMPORT_NAME == self.code[i]:
replace[i] = 'IMPORT_NAME_CONT'
last_import = i
extended_arg = 0
for offset in self.op_range(0, codelen):
op = self.code[offset]
op_name = opname[op]
oparg = None
pattr = None
if offset in cf:
k = 0
for j in cf[offset]:
rv.append(
Token('COME_FROM',
None,
repr(j),
offset="%s_%d" % (offset, k)))
k += 1
if self.op_hasArgument(op):
oparg = self.get_argument(offset) + extended_arg
extended_arg = 0
if op == EXTENDED_ARG:
raise NotImplementedError
extended_arg = oparg * 65536L
continue
if op in hasconst:
const = co.co_consts[oparg]
if type(const) == types.CodeType:
oparg = const
if const.co_name == '<lambda>':
assert op_name == 'LOAD_CONST'
op_name = 'LOAD_LAMBDA'
elif const.co_name == '<genexpr>':
op_name = 'LOAD_GENEXPR'
elif const.co_name == '<dictcomp>':
op_name = 'LOAD_DICTCOMP'
elif const.co_name == '<setcomp>':
op_name = 'LOAD_SETCOMP'
# verify uses 'pattr' for comparism, since 'attr'
# now holds Code(const) and thus can not be used
# for comparism (todo: think about changing this)
#pattr = 'code_object @ 0x%x %s->%s' %\
# (id(const), const.co_filename, const.co_name)
pattr = '<code_object ' + const.co_name + '>'
else:
pattr = const
elif op in hasname:
pattr = names[oparg]
elif op in hasjrel:
pattr = repr(offset + 3 + oparg)
elif op in hasjabs:
pattr = repr(oparg)
elif op in haslocal:
pattr = varnames[oparg]
elif op in hascompare:
pattr = cmp_op[oparg]
elif op in hasfree:
pattr = free[oparg]
if offset in self.toChange:
if self.code[offset] == JA and self.code[oparg] == WITH_CLEANUP:
op_name = 'SETUP_WITH'
cf[oparg] = cf.get(oparg, []) + [offset]
if op in (BUILD_LIST, BUILD_TUPLE, BUILD_SLICE, UNPACK_SEQUENCE,
MAKE_FUNCTION, CALL_FUNCTION, MAKE_CLOSURE,
CALL_FUNCTION_VAR, CALL_FUNCTION_KW,
CALL_FUNCTION_VAR_KW, DUP_TOPX, RAISE_VARARGS):
# CE - Hack for >= 2.5
# Now all values loaded via LOAD_CLOSURE are packed into
# a tuple before calling MAKE_CLOSURE.
if op == BUILD_TUPLE and \
self.code[self.prev[offset]] == LOAD_CLOSURE:
continue
else:
op_name = '%s_%d' % (op_name, oparg)
if op != BUILD_SLICE:
customize[op_name] = oparg
elif op == JA:
target = self.get_target(offset)
if target < offset:
if offset in self.stmts and self.code[offset+3] not in (END_FINALLY, POP_BLOCK) \
and offset not in self.not_continue:
op_name = 'CONTINUE'
else:
op_name = 'JUMP_BACK'
elif op == LOAD_GLOBAL:
if offset in self.load_asserts:
op_name = 'LOAD_ASSERT'
elif op == RETURN_VALUE:
if offset in self.return_end_ifs:
op_name = 'RETURN_END_IF'
if offset not in replace:
rv.append(
Token(op_name,
oparg,
pattr,
offset,
linestart=offset in linestartoffsets))
else:
rv.append(
Token(replace[offset],
oparg,
pattr,
offset,
linestart=offset in linestartoffsets))
if self.showasm:
out = self.out # shortcut
for t in rv:
print >> out, t
print >> out
return rv, customize
