def predict_loop(self,
inputData,
outputData1,
outputData2,
continuation=True,
initialData=None,
update_processor=lambda x: x,
verbose=0):
inputData = B.array(inputData)
#let some input run through the ESN to initialize its states from a new starting value
if (not continuation):
self._esn1._x = B.zeros(self._esn1._x.shape)
self._esn2._x = B.zeros(self._esn2._x.shape)
total_length = inputData.shape[0]
aggregated_y1 = B.empty((total_length, self._n_output1))
aggregated_y2 = B.empty((total_length, self._n_output2))
# X1, y1 = self._esn1.propagate(inputData=inputData, outputData=None, transientTime=self._transientTime, verbose=verbose-1)
# Y1 = B.dot(self._esn1._WOut, X1)
# Y1 = update_processor(self.out_activation(Y1)).T
y2 = self.out_activation(B.dot(self._esn2._WOut, self._esn2._X).T)
for i in range(total_length):
inputDataWithFeedback = B.zeros((self.n_input + self._n_output2))
inputDataWithFeedback[:self.n_input] = inputData[i, :]
inputDataWithFeedback[self.n_input:] = y2
#update models
X1, _ = self._esn1.propagateOneStep(
inputData=inputDataWithFeedback,
outputData=None,
step=i,
transientTime=self._transientTime,
verbose=verbose - 1,
learn=False)
y1 = B.dot(self._esn1._WOut, X1)
aggregated_y1[i, :] = update_processor(self.out_activation(y1)).T
#output from 1st layer and correct output
#input2 = outputData1[i] - y1.reshape(self._n_output1)
# input2 = B.vstack((y1.reshape(self._n_output1), outputData1[i]))
# x2, y2 = self._esn2.propagateOneStep(inputData=input2, outputData=None, step=i, transientTime=self._transientTime, verbose=verbose-1, learn=False)
# Y_target2[i,:] = y2.reshape(self._n_output2)
training_error1 = B.sqrt(B.mean((aggregated_y1 - outputData1)**2))
print("training errors")
print(training_error1)
return aggregated_y1, aggregated_y2
def predict(self,
inputData,
outputData1,
outputData2,
continuation=True,
initialData=None,
update_processor=lambda x: x,
verbose=0):
inputData = B.array(inputData)
#let some input run through the ESN to initialize its states from a new starting value
if (not continuation):
self._esn1._x = B.zeros(self._esn1._x.shape)
self._esn2._x = B.zeros(self._esn2._x.shape)
total_length = inputData.shape[0]
aggregated_y1 = B.empty((total_length, self._n_output1))
aggregated_y2 = B.empty((total_length, self._n_output2))
#put pixels and switch data together
inputDataWithFeedback = B.zeros(
(total_length, self.n_input + self._n_output2))
inputDataWithFeedback[:, :self.n_input] = inputData
inputDataWithFeedback[:, self.n_input:] = outputData2
X1, _ = self._esn1.propagate(inputData=inputDataWithFeedback,
outputData=None,
transientTime=self._transientTime,
verbose=verbose - 1)
aggregated_y1 = B.dot(self._esn1._WOut, X1)
aggregated_y1 = update_processor(self.out_activation(aggregated_y1)).T
training_error1 = B.sqrt(B.mean((aggregated_y1 - outputData1)**2))
print("predict errors")
print(training_error1)
return aggregated_y1, aggregated_y2
def fit(self,
inputData,
outputData,
transientTime="AutoReduce",
transientTimeCalculationEpsilon=1e-3,
transientTimeCalculationLength=20,
verbose=0):
#check the input data
if self.n_input != 0:
if len(inputData.shape) == 3 and len(outputData.shape) > 1:
#multiple time series are used with a shape (timeseries, time, dimension) -> (timeseries, time, dimension)
if inputData.shape[0] != outputData.shape[0]:
raise ValueError(
"Amount of input and output datasets is not equal - {0} != {1}"
.format(inputData.shape[0], outputData.shape[0]))
if inputData.shape[1] != outputData.shape[1]:
raise ValueError(
"Amount of input and output time steps is not equal - {0} != {1}"
.format(inputData.shape[1], outputData.shape[1]))
else:
if inputData.shape[0] != outputData.shape[0]:
raise ValueError(
"Amount of input and output time steps is not equal - {0} != {1}"
.format(inputData.shape[0], outputData.shape[0]))
else:
if inputData is not None:
raise ValueError(
"n_input has been set to zero. Therefore, the given inputData will not be used."
)
if inputData is not None:
inputData = B.array(inputData)
if outputData is not None:
outputData = B.array(outputData)
#reshape the input/output data to have the shape (timeseries, time, dimension)
if len(outputData.shape) <= 2:
outputData = outputData.reshape((1, -1, self.n_output))
if inputData is not None:
if len(inputData.shape) <= 2:
inputData = inputData.reshape((1, -1, self.n_input))
self.resetState()
# Automatic transient time calculations
if transientTime == "Auto":
transientTime = self.calculateTransientTime(
inputData[0], outputData[0], transientTimeCalculationEpsilon,
transientTimeCalculationLength)
if transientTime == "AutoReduce":
if (inputData is None
and outputData.shape[2] == 1) or inputData.shape[2] == 1:
transientTime = self.calculateTransientTime(
inputData[0], outputData[0],
transientTimeCalculationEpsilon,
transientTimeCalculationLength)
transientTime = self.reduceTransientTime(
inputData[0], outputData[0], transientTime)
else:
print(
"Transient time reduction is supported only for 1 dimensional input."
)
if inputData is not None:
partialLength = (inputData.shape[1] - transientTime)
totalLength = inputData.shape[0] * partialLength
timeseriesCount = inputData.shape[0]
elif outputData is not None:
partialLength = (outputData.shape[1] - transientTime)
totalLength = outputData.shape[0] * partialLength
timeseriesCount = outputData.shape[0]
else:
raise ValueError("Either input or output data must not to be None")
self._X = B.empty((1 + self.n_input + self.n_reservoir, totalLength))
if (verbose > 0):
bar = progressbar.ProgressBar(max_value=totalLength,
redirect_stdout=True,
poll_interval=0.0001)
bar.update(0)
for i in range(timeseriesCount):
if inputData is not None:
xx, yy = self.propagate(inputData[i], outputData[i],
transientTime, verbose - 1)
self._X[:, i * partialLength:(i + 1) * partialLength] = xx
else:
xx, yy = self.propagate(None, outputData[i], transientTime,
verbose - 1)
self._X[:, i * partialLength:(i + 1) * partialLength] = xx
if (verbose > 0):
bar.update(i)
if (verbose > 0):
bar.finish()
#define the target values
Y_target = B.empty((outputData.shape[2], totalLength))
for i in range(timeseriesCount):
Y_target[:, i * partialLength:(i + 1) *
partialLength] = self.out_inverse_activation(
outputData[i]).T[:, transientTime:]
if (self._solver == "pinv"):
self._WOut = B.dot(Y_target, B.pinv(self._X))
#calculate the training prediction now
train_prediction = self.out_activation((B.dot(self._WOut,
self._X)).T)
# elif (self._solver == "lsqr"):
# X_T = self._X.T
# self._WOut = B.dot(B.dot(Y_target, X_T),B.inv(B.dot(self._X,X_T) + self._regressionParameters[0]*B.identity(1+self.n_input+self.n_reservoir)))
# """
# #alternative representation of the equation
# Xt = X.T
# A = np.dot(X, Y_target.T)
# B = np.linalg.inv(np.dot(X, Xt) + regression_parameter*np.identity(1+self.n_input+self.n_reservoir))
# self._WOut = np.dot(B, A)
# self._WOut = self._WOut.T
# """
# #calculate the training prediction now
# train_prediction = self.out_activation(B.dot(self._WOut, self._X).T)
elif (self._solver in [
"sklearn_auto", "sklearn_lsqr", "sklearn_sag", "sklearn_svd"
]):
mode = self._solver[8:]
params = self._regressionParameters
params["solver"] = mode
self._ridgeSolver = Ridge(**params)
self._ridgeSolver.fit(self._X.T, Y_target.T)
#calculate the training prediction now
train_prediction = self.out_activation(
self._ridgeSolver.predict(self._X.T))
elif (self._solver in ["sklearn_svr", "sklearn_svc"]):
self._ridgeSolver = SVR(**self._regressionParameters)
self._ridgeSolver.fit(self._X.T, Y_target.T.ravel())
#calculate the training prediction now
train_prediction = self.out_activation(
self._ridgeSolver.predict(self._X.T))
#calculate the training error now
#flatten the outputData
outputData = outputData[:, transientTime:, :].reshape(totalLength, -1)
training_error = B.sqrt(B.mean((train_prediction - outputData)**2))
return training_error
def fit(
self,
inputData,
outputData,
transientTime="AutoReduce",
transientTimeCalculationEpsilon=1e-3,
transientTimeCalculationLength=20,
verbose=0,
):
# check the input data
if inputData.shape[0] != outputData.shape[0]:
raise ValueError(
"Amount of input and output datasets is not equal - {0} != {1}"
.format(inputData.shape[0], outputData.shape[0]))
nSequences = inputData.shape[0]
trainingLength = inputData.shape[1]
self._x = B.zeros((self.n_reservoir, 1))
# Automatic transient time calculations
if transientTime == "Auto":
transientTime = self.calculateTransientTime(
inputData,
outputData,
transientTimeCalculationEpsilon,
transientTimeCalculationLength,
)
if transientTime == "AutoReduce":
if (inputData is None
and outputData.shape[1] == 1) or inputData.shape[1] == 1:
transientTime = self.calculateTransientTime(
inputData,
outputData,
transientTimeCalculationEpsilon,
transientTimeCalculationLength,
)
transientTime = self.reduceTransientTime(
inputData, outputData, transientTime)
else:
print(
"Transient time reduction is supported only for 1 dimensional input."
)
self._X = B.zeros((
1 + self.n_input + self.n_reservoir,
nSequences * (trainingLength - transientTime),
))
Y_target = B.zeros(
(self.n_output, (trainingLength - transientTime) * nSequences))
if verbose > 0:
bar = progressbar.ProgressBar(max_value=len(inputData),
redirect_stdout=True,
poll_interval=0.0001)
bar.update(0)
for n in range(len(inputData)):
self._x = B.zeros((self.n_reservoir, 1))
self._X[:, n * (trainingLength - transientTime):(n + 1) *
(trainingLength - transientTime), ] = self.propagate(
inputData[n], transientTime=transientTime, verbose=0)
# set the target values
Y_target[:, n * (trainingLength - transientTime):(n + 1) *
(trainingLength - transientTime), ] = np.tile(
self.out_inverse_activation(outputData[n]),
trainingLength - transientTime,
).T
if verbose > 0:
bar.update(n)
if verbose > 0:
bar.finish()
if self._solver == "pinv":
self._WOut = B.dot(Y_target, B.pinv(self._X))
# calculate the training prediction now
train_prediction = self.out_activation((B.dot(self._WOut,
self._X)).T)
elif self._solver == "lsqr":
X_T = self._X.T
self._WOut = B.dot(
B.dot(Y_target, X_T),
B.inv(
B.dot(self._X, X_T) + self._regressionParameters[0] *
B.identity(1 + self.n_input + self.n_reservoir)),
)
"""
#alternative represantation of the equation
Xt = X.T
A = np.dot(X, Y_target.T)
B = np.linalg.inv(np.dot(X, Xt) + regression_parameter*np.identity(1+self.n_input+self.n_reservoir))
self._WOut = np.dot(B, A)
self._WOut = self._WOut.T
"""
# calculate the training prediction now
train_prediction = self.out_activation(
B.dot(self._WOut, self._X).T)
elif self._solver in [
"sklearn_auto",
"sklearn_lsqr",
"sklearn_sag",
"sklearn_svd",
]:
mode = self._solver[8:]
params = self._regressionParameters
params["solver"] = mode
self._ridgeSolver = Ridge(**params)
self._ridgeSolver.fit(self._X.T, Y_target.T)
# calculate the training prediction now
train_prediction = self.out_activation(
self._ridgeSolver.predict(self._X.T))
elif self._solver in ["sklearn_svr", "sklearn_svc"]:
self._ridgeSolver = SVR(**self._regressionParameters)
self._ridgeSolver.fit(self._X.T, Y_target.T.flatten())
# calculate the training prediction now
train_prediction = self.out_activation(
self._ridgeSolver.predict(self._X.T))
train_prediction = np.mean(train_prediction, 0)
# calculate the training error now
training_error = B.sqrt(B.mean((train_prediction - outputData.T)**2))
return training_error
def fit_loop(self,
inputData,
outputData1,
outputData2,
transientTime="AutoReduce",
transientTimeCalculationEpsilon=1e-3,
transientTimeCalculationLength=20,
verbose=0):
#check the input data
if self.n_input != 0:
if len(inputData.shape) == 3 and len(outputData1.shape) > 1:
#multiple time series are used with a shape (timeseries, time, dimension) -> (timeseries, time, dimension)
if inputData.shape[0] != outputData1.shape[0]:
raise ValueError(
"Amount of input and output datasets is not equal - {0} != {1}"
.format(inputData.shape[0], outputData1.shape[0]))
if inputData.shape[1] != outputData1.shape[1]:
raise ValueError(
"Amount of input and output time steps is not equal - {0} != {1}"
.format(inputData.shape[1], outputData1.shape[1]))
else:
if inputData.shape[0] != outputData1.shape[0]:
raise ValueError(
"Amount of input and output time steps is not equal - {0} != {1}"
.format(inputData.shape[0], outputData1.shape[0]))
else:
if inputData is not None:
raise ValueError(
"n_input has been set to zero. Therefore, the given inputData will not be used."
)
inputData = B.array(inputData)
outputData1 = B.array(outputData1)
outputData2 = B.array(outputData2)
self._transientTime = transientTime
self._esn1.resetState()
self._esn2.resetState()
total_length = inputData.shape[0]
print("total_length ", total_length)
if (verbose > 0):
bar = progressbar.ProgressBar(max_value=total_length,
redirect_stdout=True,
poll_interval=0.0001)
bar.update(0)
#should be named aggregated_y
aggregated_y1 = B.empty((outputData1.shape))
aggregated_y2 = B.empty((outputData2.shape))
# X1, _ = self._esn1.propagate(inputData=inputData, outputData=outputData1, transientTime=transientTime, verbose=verbose-1)
# self._esn1._X = X1
# Y_target = self.out_inverse_activation(outputData1).T
# self._esn1._WOut = B.dot(Y_target, B.pinv(X1))
# y1 = self.out_activation((B.dot(self._esn1._WOut, X1)).T)
# training_error1 = B.sqrt(B.mean((y1.reshape((total_length, self._n_output1))- outputData1)**2))
# training_error2 = 0
y2 = self.out_activation(B.dot(self._esn2._WOut, self._esn2._X).T)
for i in range((total_length)):
#input: input + output from layer 2
inputDataWithFeedback = B.zeros((self.n_input + self._n_output2))
inputDataWithFeedback[:self.n_input] = inputData[i, :]
inputDataWithFeedback[self.n_input:] = y2
#update models
X1, untrained_y1 = self._esn1.propagateOneStep(
inputData=inputDataWithFeedback,
outputData=outputData1[i],
step=i,
transientTime=transientTime,
verbose=verbose - 1,
learn=True)
#self._esn1._X = X1
#y after model update (ideally we would use y before model update)
#y1 = self.out_activation((B.dot(self._esn1._WOut, X1)).T)
aggregated_y1[i, :] = untrained_y1.reshape(self._n_output1)
#output from 1st layer and correct output
# input2 = B.vstack((y1.reshape(self._n_output1), outputData1[i]))
# x2, y2 = self._esn2.propagateOneStep(inputData=input2, outputData=outputData2[i], step=i, transientTime=transientTime, verbose=verbose-1, learn=True)
# Y_target2[i,:] = y2.reshape(self._n_output2)
if (verbose > 0):
bar.update(i)
if (verbose > 0):
bar.finish()
self._training_res = aggregated_y1
training_error1 = B.sqrt(B.mean((aggregated_y1 - outputData1)**2))
training_error2 = B.sqrt(B.mean((aggregated_y2 - outputData2)**2))
print("training errors")
print(training_error1)
print(training_error2)
return training_error1, training_error2
def fit(self,
inputData,
outputData1,
outputData2,
transientTime="AutoReduce",
transientTimeCalculationEpsilon=1e-3,
transientTimeCalculationLength=20,
verbose=0):
#check the input data
if self.n_input != 0:
if len(inputData.shape) == 3 and len(outputData1.shape) > 1:
#multiple time series are used with a shape (timeseries, time, dimension) -> (timeseries, time, dimension)
if inputData.shape[0] != outputData1.shape[0]:
raise ValueError(
"Amount of input and output datasets is not equal - {0} != {1}"
.format(inputData.shape[0], outputData1.shape[0]))
if inputData.shape[1] != outputData1.shape[1]:
raise ValueError(
"Amount of input and output time steps is not equal - {0} != {1}"
.format(inputData.shape[1], outputData1.shape[1]))
else:
if inputData.shape[0] != outputData1.shape[0]:
raise ValueError(
"Amount of input and output time steps is not equal - {0} != {1}"
.format(inputData.shape[0], outputData1.shape[0]))
else:
if inputData is not None:
raise ValueError(
"n_input has been set to zero. Therefore, the given inputData will not be used."
)
inputData = B.array(inputData)
outputData1 = B.array(outputData1)
outputData2 = B.array(outputData2)
self._transientTime = transientTime
self._esn1.resetState()
self._esn2.resetState()
total_length = inputData.shape[0]
print("total_length ", total_length)
aggregated_y1 = B.empty((outputData1.shape))
aggregated_y2 = B.empty((outputData2.shape))
#put pixels and switch data together
inputDataWithFeedback = B.zeros(
(total_length, self.n_input + self._n_output2))
inputDataWithFeedback[:, :self.n_input] = inputData
inputDataWithFeedback[:, self.n_input:] = outputData2
X1, _ = self._esn1.propagate(inputData=inputDataWithFeedback,
outputData=outputData1,
transientTime=transientTime,
verbose=verbose - 1)
self._esn1._X = X1
Y_target = self.out_inverse_activation(outputData1).T
self._esn1._WOut = B.dot(Y_target, B.pinv(X1))
aggregated_y1 = self.out_activation((B.dot(self._esn1._WOut, X1)).T)
training_error1 = B.sqrt(
B.mean((aggregated_y1.reshape(
(total_length, self._n_output1)) - outputData1)**2))
training_error2 = 0
training_error1 = B.sqrt(B.mean((aggregated_y1 - outputData1)**2))
training_error2 = B.sqrt(B.mean((aggregated_y2 - outputData2)**2))
return training_error1, training_error2