def _handle_status_lvap(self, status):
"""Handle an incoming STATUS_LVAP message.
Args:
status, a STATUS_LVAP message
Returns:
None
"""
wtp_addr = EtherAddress(status.wtp)
try:
wtp = RUNTIME.wtps[wtp_addr]
except KeyError:
LOG.info("Status from unknown WTP %s", wtp_addr)
return
if not wtp.connection:
LOG.info("Status from disconnected WTP %s", wtp_addr)
return
sta_addr = EtherAddress(status.sta)
set_mask = bool(status.flags.set_mask)
lvap = None
hwaddr = EtherAddress(status.hwaddr)
block = ResourceBlock(wtp, hwaddr, status.channel, status.band)
LOG.info("LVAP status update from %s", sta_addr)
# If the LVAP does not exists, then create a new one
if sta_addr not in RUNTIME.lvaps:
net_bssid_addr = EtherAddress(status.net_bssid)
lvap_bssid_addr = EtherAddress(status.lvap_bssid)
lvap = LVAP(sta_addr, net_bssid_addr, lvap_bssid_addr)
# TODO: This should be built starting from the status message
lvap.supports.add(ResourceBlock(lvap, sta_addr, 1, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 2, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 3, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 4, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 5, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 6, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 7, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 8, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 9, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 10, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 11, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 36, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 48, BT_L20))
RUNTIME.lvaps[sta_addr] = lvap
lvap = RUNTIME.lvaps[sta_addr]
# incoming block
pool = ResourcePool()
pool.add(block)
match = wtp.supports & pool
if not match:
LOG.error("Incoming block %s is invalid", block)
return
block = match.pop()
# this will try to updated the lvap object with the resource block
# coming in this status update message.
try:
if set_mask:
# set downlink+uplink block
lvap._downlink.setitem(block, RadioPort(lvap, block))
else:
# set uplink only blocks
lvap._uplink.setitem(block, RadioPort(lvap, block))
except ValueError:
LOG.error("Error while importing block %s, removing.", block)
block.radio.connection.send_del_lvap(lvap)
return
lvap.authentication_state = bool(status.flags.authenticated)
lvap.association_state = bool(status.flags.associated)
lvap._assoc_id = status.assoc_id
lvap._encap = EtherAddress(status.encap)
ssids = [SSID(x.ssid) for x in status.ssids]
if lvap.ssid:
# Raise LVAP leave event
LOG.info("LVAP LEAVE %s (%s)", lvap.addr, lvap.ssid)
for handler in self.server.pt_types_handlers[PT_LVAP_LEAVE]:
handler(lvap)
# removing LVAP from tenant, need first to look for right tenant
if lvap.addr in lvap.tenant.lvaps:
LOG.info("Removing %s from tenant %s", lvap.addr, lvap.ssid)
del lvap.tenant.lvaps[lvap.addr]
lvap._tenant = None
if ssids[0]:
# setting tenant without seding out add lvap message
lvap._tenant = RUNTIME.load_tenant(ssids[0])
# adding LVAP to tenant
LOG.info("Adding %s to tenant %s", lvap.addr, ssids[0])
lvap.tenant.lvaps[lvap.addr] = lvap
# Raise LVAP join event
LOG.info("LVAP JOIN %s (%s)", lvap.addr, lvap.ssid)
for handler in self.server.pt_types_handlers[PT_LVAP_JOIN]:
handler(lvap)
# update remaining ssids
lvap._ssids = ssids[1:]
# set ports
lvap.set_ports()
LOG.info("LVAP status %s", lvap)
def _handle_status_lvap(self, status):
"""Handle an incoming STATUS_LVAP message.
Args:
status, a STATUS_LVAP message
Returns:
None
"""
wtp_addr = EtherAddress(status.wtp)
try:
wtp = RUNTIME.wtps[wtp_addr]
except KeyError:
LOG.info("Status from unknown WTP %s", wtp_addr)
return
if not wtp.connection:
LOG.info("Status from disconnected WTP %s", wtp_addr)
return
sta_addr = EtherAddress(status.sta)
set_mask = bool(status.flags.set_mask)
lvap = None
hwaddr = EtherAddress(status.hwaddr)
block = ResourceBlock(wtp, hwaddr, status.channel, status.band)
LOG.info("LVAP status update from %s", sta_addr)
# If the LVAP does not exists, then create a new one
if sta_addr not in RUNTIME.lvaps:
net_bssid_addr = EtherAddress(status.net_bssid)
lvap_bssid_addr = EtherAddress(status.lvap_bssid)
lvap = LVAP(sta_addr, net_bssid_addr, lvap_bssid_addr)
# TODO: This should be built starting from the status message
lvap.supports.add(ResourceBlock(lvap, sta_addr, 1, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 2, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 3, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 4, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 5, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 6, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 7, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 8, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 9, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 10, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 11, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 36, BT_L20))
lvap.supports.add(ResourceBlock(lvap, sta_addr, 48, BT_L20))
RUNTIME.lvaps[sta_addr] = lvap
lvap = RUNTIME.lvaps[sta_addr]
# incoming block
pool = ResourcePool()
pool.add(block)
match = wtp.supports & pool
if not match:
LOG.error("Incoming block %s is invalid", block)
return
# this will try to updated the lvap object with the resource block
# coming in this status update message.
try:
if set_mask:
# set downlink+uplink block
lvap._downlink.setitem(block, RadioPort(lvap, block))
else:
# set uplink only blocks
lvap._uplink.setitem(block, RadioPort(lvap, block))
except ValueError:
LOG.error("Error while importing block %s, removing.", block)
block.radio.connection.send_del_lvap(lvap)
return
lvap.authentication_state = bool(status.flags.authenticated)
lvap.association_state = bool(status.flags.associated)
lvap._assoc_id = status.assoc_id
lvap._encap = EtherAddress(status.encap)
ssids = [SSID(x.ssid) for x in status.ssids]
if lvap.ssid:
# Raise LVAP leave event
LOG.info("LVAP LEAVE %s (%s)", lvap.addr, lvap.ssid)
for handler in self.server.pt_types_handlers[PT_LVAP_LEAVE]:
handler(lvap)
# removing LVAP from tenant, need first to look for right tenant
if lvap.addr in lvap.tenant.lvaps:
LOG.info("Removing %s from tenant %s", lvap.addr, lvap.ssid)
del lvap.tenant.lvaps[lvap.addr]
lvap._tenant = None
if ssids[0]:
# setting tenant without seding out add lvap message
lvap._tenant = RUNTIME.load_tenant(ssids[0])
# adding LVAP to tenant
LOG.info("Adding %s to tenant %s", lvap.addr, ssids[0])
lvap.tenant.lvaps[lvap.addr] = lvap
# Raise LVAP join event
LOG.info("LVAP JOIN %s (%s)", lvap.addr, lvap.ssid)
for handler in self.server.pt_types_handlers[PT_LVAP_JOIN]:
handler(lvap)
# update remaining ssids
lvap._ssids = ssids[1:]
# set ports
lvap.set_ports()
LOG.info("LVAP status %s", lvap)
def _handle_status_lvap(self, wtp, status):
"""Handle an incoming STATUS_LVAP message.
Args:
status, a STATUS_LVAP message
Returns:
None
"""
if not wtp.connection:
LOG.info("Status from disconnected WTP %s", wtp.addr)
return
sta_addr = EtherAddress(status.sta)
set_mask = bool(status.flags.set_mask)
lvap = None
LOG.info("LVAP status update from %s", sta_addr)
# If the LVAP does not exists, then create a new one
if sta_addr not in RUNTIME.lvaps:
net_bssid_addr = EtherAddress(status.net_bssid)
lvap_bssid_addr = EtherAddress(status.lvap_bssid)
lvap = LVAP(sta_addr, net_bssid_addr, lvap_bssid_addr)
RUNTIME.lvaps[sta_addr] = lvap
lvap = RUNTIME.lvaps[sta_addr]
# incoming block
lvap.supported = ResourcePool()
hwaddr = EtherAddress(status.hwaddr)
channel = status.channel
band = status.band
lvap.supported.add(ResourceBlock(lvap, hwaddr, channel, band))
match = wtp.supports & lvap.supported
if not match:
LOG.error("Incoming block %s is invalid", block)
return
block = match.pop()
# this will try to updated the lvap object with the resource block
# coming in this status update message.
try:
if set_mask:
# set downlink+uplink block
lvap._downlink.setitem(block, RadioPort(lvap, block))
else:
# set uplink only blocks
lvap._uplink.setitem(block, RadioPort(lvap, block))
except ValueError:
LOG.error("Error while importing block %s, removing.", block)
block.radio.connection.send_del_lvap(lvap)
return
lvap.authentication_state = bool(status.flags.authenticated)
lvap.association_state = bool(status.flags.associated)
lvap._assoc_id = status.assoc_id
lvap._encap = EtherAddress(status.encap)
ssids = [SSID(x.ssid) for x in status.ssids]
if lvap.ssid:
# Raise LVAP leave event
self.server.send_lvap_leave_message_to_self(lvap)
# removing LVAP from tenant, need first to look for right tenant
if lvap.addr in lvap.tenant.lvaps:
LOG.info("Removing %s from tenant %s", lvap.addr, lvap.ssid)
del lvap.tenant.lvaps[lvap.addr]
lvap._tenant = None
if ssids[0]:
tenant = RUNTIME.load_tenant(ssids[0])
if not tenant:
LOG.info("LVAP %s from unknown tenant %s", lvap.addr, ssids[0])
RUNTIME.remove_lvap(lvap.addr)
return
# setting tenant without seding out add lvap message
lvap._tenant = tenant
# adding LVAP to tenant
LOG.info("Adding %s to tenant %s", lvap.addr, ssids[0])
lvap.tenant.lvaps[lvap.addr] = lvap
# Raise LVAP join event
self.server.send_lvap_join_message_to_self(lvap)
# update remaining ssids
lvap._ssids = ssids[1:]
# set ports
lvap.set_ports()
LOG.info("LVAP status %s", lvap)
