示例#1
0
def testValidDeleg(t, env):
    """REBOOT with read delegation and reclaim it

    FLAGS: reboot delegations
    DEPEND: MKFILE
    CODE: REBT8
    """
    from st_delegation import _get_deleg

    c = env.c1
    id = "pynfs%i_%s" % (os.getpid(), t.code)
    c.init_connection(id, cb_ident=0)
    deleg_info, fh, stateid = _get_deleg(t, c, c.homedir + [t.code], None, NFS4_OK)
    sleeptime = _waitForReboot(c, env)
    try:
        res = c.open_file(t.code, fh, claim_type=CLAIM_PREVIOUS, deleg_type=OPEN_DELEGATE_NONE)
        check(res, NFS4ERR_STALE_CLIENTID, "Reclaim using old clientid")
        #        res = c.compound([c.renew_op(c.clientid)])
        #        check(res, NFS4ERR_STALE_CLIENTID, "RENEW after reboot")
        c.init_connection(id, cb_ident=0)
        res = c.open_file(t.code, fh, claim_type=CLAIM_PREVIOUS, deleg_type=OPEN_DELEGATE_READ)
        check(res, msg="Reclaim using newly created clientid")
        deleg_info = res.resarray[-2].switch.switch.delegation
        if deleg_info.delegation_type != OPEN_DELEGATE_READ:
            t.fail("Could not reclaim read delegation")
    finally:
        env.sleep(sleeptime, "Waiting for grace period to end")
示例#2
0
def _get_deleg(t, c, path, funct=None, response=NFS4_OK, write=False,
               deny=OPEN4_SHARE_DENY_NONE):
    time.sleep(0.5) # Give server time to check callback path
    if write:
        access = OPEN4_SHARE_ACCESS_WRITE
        deleg = OPEN_DELEGATE_WRITE
        name = "write delegation"
    else:
        access = OPEN4_SHARE_ACCESS_READ
        deleg = OPEN_DELEGATE_READ
        name = "read delegation"
    # Create the file
    res = c.create_file(t.code, path, access=access, deny=deny, 
                        set_recall=True,
                        recall_funct=funct, recall_return=response)
    check(res)
    fh, stateid = c.confirm(t.code, res)
    # Check for delegation
    deleg_info = res.resarray[-2].switch.switch.delegation
    if deleg_info.delegation_type == deleg:
        return deleg_info, fh, stateid
    
    # Try opening the file again
    res = c.open_file(t.code, path, access=access, deny=deny, 
                      set_recall=True,
                      recall_funct=funct, recall_return=response)
    check(res)
    fh, stateid = c.confirm(t.code, res)
    deleg_info = res.resarray[-2].switch.switch.delegation
    if deleg_info.delegation_type != deleg:
        t.pass_warn("Could not get %s" % name)
    return deleg_info, fh, stateid
示例#3
0
def _try_empty(t, c, path):
    ops = c.use_obj(path) + [c.getattr([])]
    res = c.compound(ops)
    check(res, msg="GETTATTR with empty attr list")
    attrs = res.resarray[-1].obj_attributes
    if attrs:
        t.fail("GETTATTR with empty attr list returned %s" % str(attrs))
示例#4
0
文件: st_debug.py 项目: ffilz/pynfs
def testDeadlock(t, env):
    """Trigger deadlock bug

    FLAGS: debug all
    CODE: DEBUG1
    """
    c1 = env.c1.new_client(env.testname(t))
    sess1 = c1.create_session()
    owner = open_owner4(0, "My Open Owner")
    how = openflag4(OPEN4_CREATE, createhow4(GUARDED4, {FATTR4_SIZE:0}))
    claim = open_claim4(CLAIM_NULL, env.testname(t))
    open_op = op.open(0, OPEN4_SHARE_ACCESS_BOTH , OPEN4_SHARE_DENY_NONE,
                      owner, how, claim)
    res = sess1.compound(env.home + [open_op, op.getfh()]) # OPEN
    fh = res.resarray[-1].object
    stateid = res.resarray[-2].stateid
    ####
    def ops(i):
        return [op.putfh(fh),
                op.write(stateid, i*1000, UNSTABLE4, chr(97+i)*100),
                op.getattr(42950721818L)
                ]
    xids = [sess1.compound_async(ops(i), slot=i) for i in range(4)]
    for xid in xids:
        res = sess1.listen(xid)
        check(res)
        print res
    res = close_file(sess1, fh, stateid=stateid)
    check(res)
示例#5
0
文件: st_lookup.py 项目: mauser/pynfs
def testDots(t, env):
    """LOOKUP on  . and ..

    OK or _NOENT - WARN
    _BADNAME - PASS

    FLAGS: lookup dots all
    DEPEND: MKDIR
    CODE: LOOK8
    """
    # Create dir/foo
    c = env.c1
    dir = c.homedir + [t.code]
    res = c.create_obj(dir)
    check(res)
    res = c.create_obj(dir + ['foo'])
    check(res)
    # Run tests
    res1 = c.compound(c.use_obj(dir + ['.']))
    checklist(res1, [NFS4ERR_NOENT, NFS4ERR_BADNAME],
              "LOOKUP a nonexistant '.'")
    res2 = c.compound(c.use_obj(dir + ['..']))
    checklist(res2, [NFS4ERR_NOENT, NFS4ERR_BADNAME],
              "LOOKUP a nonexistant '..'")
    res1 = c.compound(c.use_obj(dir + ['.', 'foo']))
    checklist(res1, [NFS4ERR_NOENT, NFS4ERR_BADNAME],
              "LOOKUP a nonexistant '.'")
    res2 = c.compound(c.use_obj(dir + ['..', t.code]))
    checklist(res2, [NFS4ERR_NOENT, NFS4ERR_BADNAME],
              "LOOKUP a nonexistant '..'")
示例#6
0
def testUnaccessibleDirAttrs(t, env):
    """READDIR with (cfh) in unaccessible directory requesting attrs

    FLAGS: readdir all mode000
    DEPEND: MKDIR MODE
    CODE: RDDR12
    """
    c = env.c1
    path = c.homedir + [t.code]
    c.maketree([t.code, ['hidden']])
    ops = c.use_obj(path) + [c.setattr({FATTR4_MODE:0})]
    res = c.compound(ops)
    check(res, msg="Setting mode=0 on directory %s" % t.code)
    ops = c.use_obj(path) + \
          [c.readdir(attr_request=[FATTR4_RDATTR_ERROR, FATTR4_TYPE])]
    res = c.compound(ops)
    if env.opts.uid == 0:
	    checklist(res, [NFS4_OK, NFS4ERR_ACCESS], "READDIR of directory with mode=000")
    else:
	    check(res, NFS4ERR_ACCESS, "READDIR of directory with mode=000")
   
###########################################


    def testStrangeNames(t, env):
        """READDIR should obey OPEN naming policy

        Extra test

        Comments: Verifying that readdir obeys the same naming policy
        as OPEN.
        """
        self.init_connection()
        
        try:
            (accepted_names, rejected_names) = self.try_file_names(remove_files=0)
        except SkipException, e:
            self.skip(e)

        fh = self.do_rpc(self.ncl.do_getfh, self.tmp_dir) 
        entries = self.do_rpc(self.ncl.do_readdir, fh)
        readdir_names = [entry.name for entry in entries]

        # Verify that READDIR returned all accepted_names
        missing_names = []
        for name in accepted_names:
            if name not in readdir_names:
                missing_names.append(name)

        self.failIf(missing_names, "Missing names in READDIR results: %s" \
                    % missing_names)

        # ... and nothing more
        extra_names = []
        for name in readdir_names:
            if not name in accepted_names:
                extra_names.append(name)

        self.failIf(extra_names, "Extra names in READDIR results: %s" \
                    % extra_names)
示例#7
0
def testLeasePeriod(t, env):
    """Any unconfirmed record that is not confirmed within
       a lease period SHOULD be removed.

    FLAGS: exchange_id all
    CODE: EID9
    """
    c1 = env.c1.new_client("%s_1" % env.testname(t))
    c2 = env.c1.new_client("%s_2" % env.testname(t))

    # Get server's lease time
    c3 = env.c1.new_client("%s_3" % env.testname(t))
    sess = c3.create_session()
    lease = _getleasetime(sess)

    # CREATE_SESSION
    chan_attrs = channel_attrs4(0,8192,8192,8192,128,8,[])
    time.sleep(min(lease - 10, 1))
    # Inside lease period, create_session will success.
    res1 = c1.c.compound([op.create_session(c1.clientid, c1.seqid, 0,
                                        chan_attrs, chan_attrs,
                                        123, [])], None)
    check(res1)

    time.sleep(lease + 10)
    # After lease period, create_session will get error NFS4ERR_STALE_CLIENTID
    res2 = c2.c.compound([op.create_session(c2.clientid, c2.seqid, 0,
                                        chan_attrs, chan_attrs,
                                        123, [])], None)
    check(res2, NFS4ERR_STALE_CLIENTID)
示例#8
0
def testOPENClaimFH(t, env):
    """OPEN file with claim_type is CLAIM_FH

    FLAGS: open all
    CODE: OPEN7
    """
    sess1 = env.c1.new_client_session(env.testname(t))
    res = create_file(sess1, env.testname(t))
    check(res)

    fh = res.resarray[-1].object
    stateid = res.resarray[-2].stateid
    res = close_file(sess1, fh, stateid=stateid)
    check(res)

    claim = open_claim4(CLAIM_FH)
    how = openflag4(OPEN4_NOCREATE)
    oowner = open_owner4(0, "My Open Owner 2")
    open_op = op.open(0, OPEN4_SHARE_ACCESS_BOTH, OPEN4_SHARE_DENY_NONE,
                      oowner, how, claim)
    res = sess1.compound([op.putfh(fh), open_op])
    check(res)

    stateid = res.resarray[-1].stateid
    stateid.seqid = 0
    data = "write test data"
    res = sess1.compound([op.putfh(fh), op.write(stateid, 5, FILE_SYNC4, data)])
    check(res)
    res = sess1.compound([op.putfh(fh), op.read(stateid, 0, 1000)])
    check(res)
    if not res.resarray[-1].eof:
        fail("EOF not set on read")
    desired = "\0"*5 + data
    if res.resarray[-1].data != desired:
        fail("Expected %r, got %r" % (desired, res.resarray[-1].data))
示例#9
0
def testChangeDeleg(t, env, funct=_recall):
    """Get a read delegation, change to a different callback server, then
    recall the delegation

    FLAGS: delegations
    CODE: DELEG9
    """
    from nfs4lib import CBServer
    c = env.c1
    id = 'pynfs%i_%s' % (os.getpid(), t.code)
    c.init_connection(id, cb_ident=0)
    deleg_info, fh, stateid = _get_deleg(t, c, c.homedir + [t.code], funct, NFS4_OK)
    # Create new callback server
    new_server = CBServer(c)
    new_server.set_cb_recall(c.cbid, funct, NFS4_OK);
    cb_thread = threading.Thread(target=new_server.run)
    cb_thread.setDaemon(1)
    cb_thread.start()
    c.cb_server = new_server
    env.sleep(3)
    # Switch to using new server
    res = c.compound([_set_clientid(c, id, new_server)])
    check(res, msg="Switch to new callback server")
    c.clientid = res.resarray[0].switch.switch.clientid
    confirm = res.resarray[0].switch.switch.setclientid_confirm
    confirmop = c.setclientid_confirm_op(c.clientid, confirm)
    res = c.compound([confirmop])
    checklist(res, [NFS4_OK, NFS4ERR_RESOURCE])
    if res.status == NFS4ERR_RESOURCE:
        # ibm workaround
        res = c.compound([confirmop])
        check(res)
    count = new_server.opcounts[OP_CB_RECALL]
    fh2, stateid2 = _cause_recall(t, env)
    _verify_cb_occurred(t, c, count)
示例#10
0
def _try_changed_size(env, path):
    c = env.c1
    dict = c.do_getattrdict(path, [FATTR4_SIZE])
    dict[FATTR4_SIZE] += 1
    ops = c.use_obj(path) + [c.nverify_op(dict)] + c.use_obj(path)
    res = c.compound(ops)
    check(res, msg="NVerifying incorrect size")
示例#11
0
def testLargeReadWrite(t, env):
    """Compound with large READ and large WRITE

    FLAGS: write ganesha
    DEPEND: MKFILE
    CODE: WRT16
    """
    c = env.c1
    c.init_connection()
    maxread, maxwrite = _get_iosize(t, c, c.homedir)
    # linux server really should be able to handle (maxread, maxwrite)
    # but can't:
    size = min(maxread/4, maxwrite/4)
    writedata = 'A'*size
    attrs = {FATTR4_SIZE: size}
    fh, stateid = c.create_confirm(t.code, attrs=attrs,
                                    deny=OPEN4_SHARE_DENY_NONE)
    ops = c.use_obj(fh)
    ops += [c.read_op(stateid, 0, size)]
    ops += [c.write_op(stateid, 0, UNSTABLE4, writedata)]
    res = c.compound(ops)
    check(res)
    data = res.resarray[-2].switch.switch.data
    if len(data) != len(writedata):
	    t.fail("READ returned %d bytes, expected %d" %
                                    (len(data), len(writedata)))
    if (data != '\0'*size):
        t.fail("READ returned unexpected data")
    res = c.read_file(fh, 0, size)
    _compare(t, res, writedata, True)
示例#12
0
def testCallbackInfoUpdate(t, env):
    """A probable callback information update and records
       an unconfirmed { v, x, c, k, t } and leaves the
       confirmed { v, x, c, l, s } in place, such that t != s.

    FLAGS: setclientid all
    DEPEND: INIT
    CODE: CID4a
    """
    c1 = env.c1
    clid = "Clid_for_%s_pid=%i" % (t.code, os.getpid())

    # confirmed { v, x, c, l, s }
    (cclientid, cconfirm) = c1.init_connection(clid, verifier=c1.verifier)

    # request { v, x, c, k, s } --> unconfirmed { v, x, c, k, t }
    ops = [c1.setclientid(clid, verifier=c1.verifier)]
    res = c1.compound(ops)
    check(res)

    tclientid = res.resarray[0].switch.switch.clientid
    tconfirm = res.resarray[0].switch.switch.setclientid_confirm

    # (t != s)
    if tconfirm == '\x00\x00\x00\x00\x00\x00\x00\x00':
        t.fail("Got clientid confirm verifier with all zero!")

    if cclientid != tclientid:
        t.fail("Return a different clientID for callback information updating!")

    if tconfirm == cconfirm:
        t.fail("Return a same confirm for callback information updating!")
示例#13
0
def _try_mand(env, path):
    c = env.c1
    mand_bits = [attr.bitnum for attr in env.attr_info if attr.mandatory and attr.name != "rdattr_error"]
    dict = c.do_getattrdict(path, mand_bits)
    ops = c.use_obj(path) + [c.nverify_op(dict)] + c.use_obj(path)
    res = c.compound(ops)
    check(res, NFS4ERR_SAME, "NVerifying mandatory attributes against getattr")
示例#14
0
def testConfirmedDiffVerifier(t, env):
    """The server has previously recorded a confirmed { u, x, c, l, s }
       record such that v != u, l may or may not equal k, and has not
       recorded any unconfirmed { *, x, *, *, * } record for x.  The
       server records an unconfirmed { v, x, d, k, t } (d != c, t != s).

    FLAGS: setclientid all
    DEPEND: INIT
    CODE: CID4b
    """
    c1 = env.c1
    clid = "Clid_for_%s_pid=%i" % (t.code, os.getpid())

    # confirmed { u, x, c, l, s }
    (cclientid, cconfirm) = c1.init_connection(clid, verifier=c1.verifier)

    # request { v, x, c, k, s } --> unconfirmed { v, x, d, k, t }
    ops = [c1.setclientid(clid, verifier="diff")]
    res = c1.compound(ops)
    check(res)

    tclientid = res.resarray[0].switch.switch.clientid
    tconfirm = res.resarray[0].switch.switch.setclientid_confirm

    # (d != c, t != s)
    if tconfirm == '\x00\x00\x00\x00\x00\x00\x00\x00':
        t.fail("Got clientid confirm verifier with all zero!")

    if cclientid == tclientid:
        t.fail("Return a same clientID for different verifier!")

    if tconfirm == cconfirm:
        t.fail("Return a same confirm for different verifier!")
示例#15
0
def testClaimCur(t, env):
    """DELEGATION test

    Get read delegation, then have it recalled.  In the process
    of returning, send some OPENs with CLAIM_DELEGATE_CUR

    FLAGS: delegations
    CODE: DELEG14
    """
    c = env.c1
    c.init_connection('pynfs%i_%s' % (os.getpid(), t.code), cb_ident=0)
    
    deleg_info, fh, stateid = _get_deleg(t, c, c.homedir + [t.code],
                                         None, NFS4_OK)
    
    # Cause it to be recalled, and wait for cb_recall to finish
    # FRED - this is problematic if server doesn't reply until
    # it gets the DELEGRETURN
    res = c.open_file('newowner', c.homedir + [t.code],
                      access=OPEN4_SHARE_ACCESS_WRITE,
                      deny=OPEN4_SHARE_DENY_NONE)
    checklist(res, [NFS4_OK, NFS4ERR_DELAY], "Open which causes recall")
    env.sleep(2, "Waiting for recall")

    # Now send some opens
    path = c.homedir + [t.code]
    res = c.open_file('owner1', path, access=OPEN4_SHARE_ACCESS_READ,
                            claim_type=CLAIM_DELEGATE_CUR,
                            deleg_stateid=deleg_info.read.stateid)
    check(res)
    ops = c.use_obj(path) + [c.delegreturn_op(deleg_info.read.stateid)]
    res = c.compound(ops)
    check(res)
示例#16
0
def _verify_cb_occurred(t, c, count):
    newcount = c.cb_server.opcounts[OP_CB_RECALL]
    if newcount <= count:
        t.fail("Recall for callback_ident=%i never occurred" % c.cbid)
    res = c.cb_server.get_recall_res(c.cbid)
    if res is not None:
        check(res, msg="DELEGRETURN")
示例#17
0
def _try_long(env, path):
    c = env.c1
    all = [attr.bitnum for attr in env.attr_info if not attr.writeonly]
    ops = c.use_obj(path) + [c.getattr(all)]
    res = c.compound(ops)
    # Note attrs are unpacked which helps check for corruption
    check(res, msg="Asking for all legal attributes")
示例#18
0
def testLargeData(t, env):
    """WRITE with a large amount of data

    FLAGS: write read all
    DEPEND: MKFILE
    CODE: WRT5
    """
    c = env.c1
    c.init_connection()
    fh, stateid = c.create_confirm(t.code)
    data = "abcdefghijklmnopq" * 0x10000
    # Write the data
    pos = 0
    while pos < len(data):
        res = c.write_file(fh, data[pos:], pos, stateid)
        check(res, msg="WRITE with a large amount of data")
        pos += res.count
        if res.count == 0:
            t.fail("WRITE with a large amount of data returned count=0")
    # Read the data back in
    eof = False
    newdata = ''
    while not eof:
        res = c.read_file(fh, len(newdata), len(data) - len(newdata), stateid)
        check(res, msg="READ with large amount of data")
        newdata += res.data
        eof = res.eof
    if data != newdata:
        t.fail("READ did not correspond to WRITE with large dataset")
示例#19
0
def testSecinfoExportToExport(t, env):
    """SECINFO across exports should return NFS4_OK

    FLAGS: exports
    DEPEND: EXP1
    CODE: EXP3
    """ 
    c = env.c1
    
    # Check /ifs export
    ops = [c.putrootfh_op()]
    ops += [c.secinfo_op("ifs")]
    res = c.compound(ops)
    check(res)
    if len(res.resarray[-1].switch.switch) != 1:
        t.fail("SECINFO on /ifs returned incorrect number of flavors")

    # Check /ifs/data export
    ops = [c.putrootfh_op()]
    ops += [c.lookup_op("ifs")]
    ops += [c.secinfo_op("data")]
    res = c.compound(ops)
    check(res)
    if len(res.resarray[-1].switch.switch) != 4:
        t.fail("SECINFO on /ifs/data returned incorrect number of flavors")
示例#20
0
def testEmptyCommit(t, env):
    """Check for proper handling of empty LAYOUTCOMMIT.

    FLAGS: block
    CODE: BLOCK3
    """
    sess = env.c1.new_pnfs_client_session(env.testname(t))
    # Create the file
    res = create_file(sess, env.testname(t))
    check(res)
    # Get layout 1
    fh = res.resarray[-1].object
    open_stateid = res.resarray[-2].stateid
    print open_stateid
    ops = [op.putfh(fh),
           op.layoutget(False, LAYOUT4_BLOCK_VOLUME, LAYOUTIOMODE4_RW,
                        0, 8192, 8192, open_stateid, 0xffff)]
    res = sess.compound(ops)
    check(res)
    # Get layout 2
    lo_stateid1 = res.resarray[-1].logr_stateid
    print lo_stateid1
    ops = [op.putfh(fh),
           op.layoutget(False, LAYOUT4_BLOCK_VOLUME, LAYOUTIOMODE4_RW,
                        8192, 8192, 8192, lo_stateid1, 0xffff)]
    res = sess.compound(ops)
    check(res)
    lo_stateid2 = res.resarray[-1].logr_stateid
    print lo_stateid2
    # Parse opaque to get info for commit
    # STUB not very general
    layout = res.resarray[-1].logr_layout[-1]
    p = BlockUnpacker(layout.loc_body)
    opaque = p.unpack_pnfs_block_layout4()
    p.done()
    extent = opaque.blo_extents[-1]
    extent.bex_state = PNFS_BLOCK_READWRITE_DATA
    p = BlockPacker()
    p.pack_pnfs_block_layoutupdate4(pnfs_block_layoutupdate4([extent]))
    time = newtime4(True, get_nfstime())
    ops = [op.putfh(fh),
           op.layoutcommit(extent.bex_file_offset,
                           extent.bex_length,
                           False, lo_stateid2,
                           newoffset4(True, 2 * 8192 - 1),
                           time,
                           layoutupdate4(LAYOUT4_BLOCK_VOLUME, p.get_buffer()))]
    res = sess.compound(ops)
    check(res)
    # Send another LAYOUTCOMMIT, with an empty opaque
    time = newtime4(True, get_nfstime())
    ops = [op.putfh(fh),
           op.layoutcommit(extent.bex_file_offset,
                           extent.bex_length,
                           False, lo_stateid2,
                           newoffset4(True, 2 * 8192 - 1),
                           time,
                           layoutupdate4(LAYOUT4_BLOCK_VOLUME, ""))]
    res = sess.compound(ops)
    check(res)
示例#21
0
def testLongName(t, env):
    """CREATE should fail with NFS4ERR_NAMETOOLONG with long filenames

    FLAGS: create longname all
    CODE: CR15
    """
    c = env.c1
    res = c.create_obj(c.homedir + [env.longname])
    check(res, NFS4ERR_NAMETOOLONG, "CREATE with very long component")

 ##############################################

#FRED - need utf8 check
    # FIXME
    def testNamingPolicy(self):
        """CREATE should obey OPEN file name creation policy

        Extra test
        """
        self.init_connection()

        try:
            (x, rejected_names_open) = self.try_file_names(creator=self.create_via_open)
            
            (x, rejected_names_create) = self.try_file_names(creator=self.create_via_create)
            self.failIf(rejected_names_open != rejected_names_create,
                        "CREATE does not obey OPEN naming policy")
        except SkipException, e:
            self.skip(e)
示例#22
0
文件: st_open.py 项目: mauser/pynfs
def testCreatExclusiveFile(t, env):
    """OPEN normal file with create and exclusive flags

    FLAGS: open all
    DEPEND: INIT
    CODE: OPEN4
    """
    c = env.c1
    c.init_connection()
    # Create the file
    res = c.create_file(t.code, mode=EXCLUSIVE4, verifier='12345678', deny=OPEN4_SHARE_DENY_NONE)
    checklist(res, [NFS4_OK, NFS4ERR_NOTSUPP],
              "Trying to do exclusive create of file %s" % t.code)
    if res.status == NFS4ERR_NOTSUPP:
        c.fail_support("Exclusive OPEN not supported")
    fh, stateid = c.confirm(t.code, res)
    # Create the file again, should return an error
    res = c.create_file(t.code, mode=EXCLUSIVE4, verifier='87654321', deny=OPEN4_SHARE_DENY_NONE)
    check(res, NFS4ERR_EXIST,
          "Trying to do exclusive recreate of file %s" % t.code)
    # Create with same verifier should return same object
    res = c.create_file(t.code, mode=EXCLUSIVE4, verifier='12345678', deny=OPEN4_SHARE_DENY_NONE)
    check(res, msg="Trying to do exclusive recreate of file %s" % t.code)
    newfh, stateid = c.confirm(t.code, res)
    if fh != newfh:
        c.fail("Filehandle changed on duplicate exclusive create")
示例#23
0
文件: st_lock.py 项目: bongiojp/pynfs
def testTimedoutGrabLock(t, env):
    """LOCK: server should release locks of timed out client 

    FLAGS: lock timed all
    DEPEND: MKFILE
    CODE: LOCK13
    """
    c1 = env.c1
    c1.init_connection()
    # Client 1: create a file and get its fh
    fh1, stateid1 = c1.create_confirm(t.code)
    c2 = env.c2
    c2.init_connection()
    # Client 2: open the file
    fh2, stateid2 = c2.open_confirm(t.code, deny=OPEN4_SHARE_DENY_NONE)
    # Client 1: lock file
    res1 = c1.lock_file(t.code, fh1, stateid1)
    check(res1)
    # Now wait, let client1 expire while client2 sends RENEWs
    sleeptime = c2.getLeaseTime() // 2
    for i in range(3):
        env.sleep(sleeptime)
        res = c2.compound([c2.renew_op(c2.clientid)])
        checklist(res, [NFS4_OK, NFS4ERR_CB_PATH_DOWN])
    # Client 2: Lock file, should work since Client 1's lock has expired
    res2 = c2.lock_file(t.code, fh2, stateid2, type=READ_LT)
    check(res2, msg="Locking file after another client's lock expires")
示例#24
0
文件: st_open.py 项目: mauser/pynfs
def testUpgrades(t, env):
    """OPEN read, write, and read-write, then close

    Inspired by a linux nfsd regression: the final close closes all the
    opens, and nfsd did that right, but some misaccounting somewhere
    leaked a file reference with the result that the filesystem would be
    unmountable after running this test.

    FLAGS: open all
    DEPEND: MKFILE
    CODE: OPEN29
    """
    c = env.c1
    c.init_connection()
    file = c.homedir + [t.code]
    owner = t.code
    c.create_confirm(owner, file, access=OPEN4_SHARE_ACCESS_READ,
                                     deny=OPEN4_SHARE_DENY_NONE)
    c.open_file(owner, file, access=OPEN4_SHARE_ACCESS_WRITE,
                                     deny=OPEN4_SHARE_DENY_NONE)
    res = c.open_file(owner, file, access=OPEN4_SHARE_ACCESS_BOTH,
                                     deny=OPEN4_SHARE_DENY_NONE)
    check(res)
    fh = res.resarray[-1].switch.switch.object
    stateid = res.resarray[-2].switch.switch.stateid
    c.close_file(owner, fh, stateid)
示例#25
0
def testUndefined(t, env):
    """COMPOUND with ops 0, 1, 2 and 200 should return NFS4ERR_OP_ILLEGAL

    Comments: The server should return NFS4ERR_OP_ILLEGAL for the
    undefined operations 0, 1 and 2. Although operation 2 may be
    introduced in later minor versions, the server should always
    return NFS4ERR_NOTSUPP if the minorversion is 0.

    FLAGS: compound all
    CODE: COMP5
    """
    # pack_nfs_argop4 does not allow packing invalid operations.
    opnum = OP_ILLEGAL
    class custom_packer(NFS4Packer):
        def pack_nfs_argop4(self, data):
            self.pack_int(data.argop)
    c = env.c1
    origpacker = c.nfs4packer
    try:
        c.nfs4packer = custom_packer()
        for opnum in [OP_ILLEGAL, 0, 1, 2, 200]:
            try:
                res = c.compound([nfs_argop4(argop=opnum)])
                check(res, NFS4ERR_OP_ILLEGAL, "Sent illegal op=%i" % opnum)
            except RPCError, e:
                t.fail("COMPOUND with illegal op=%i got %s, "
                       "expected NFS4ERR_OP_ILLEGAL" % (opnum,e))
    finally:
        c.nfs4packer = origpacker
示例#26
0
文件: st_open.py 项目: mauser/pynfs
def testDenyRead3(t, env):
    """READ on a read-denied file

    NFS4ERR_LOCKED return is specified in 8.1.4:
        seems to apply to conflicts due to an OPEN(deny=x)
    NFS4ERR_ACCESS return is specified in 14.2.16:
        seems to apply to principle not having access to file
    NFS4ERR_OPENMODE return is specified in 8.1.4:
        (does not apply to special stateids) Why is this again?
        seems to apply to doing WRITE on OPEN(allow=read)

    FLAGS: open read all
    DEPEND: MKFILE
    CODE: OPEN23
    """
    c = env.c1
    c.init_connection()
    fh, stateid = c.create_confirm(t.code,
                                   access=OPEN4_SHARE_ACCESS_BOTH,
                                   deny=OPEN4_SHARE_DENY_READ)
    res = c.write_file(fh, 'data', 0, stateid)
    check(res)
    # Try to read file w/o opening
    res = c.read_file(fh)
    check(res, NFS4ERR_LOCKED, "Trying to READ a read-denied file")
示例#27
0
def _testDeleg(t, env, openaccess, want, breakaccess, sec = None, sec2 = None):
    recall = threading.Event()
    def pre_hook(arg, env):
        recall.stateid = arg.stateid # NOTE this must be done before set()
        recall.cred = env.cred.raw_cred
        env.notify = recall.set # This is called after compound sent to queue
    def post_hook(arg, env, res):
        return res
    sess1 = env.c1.new_client_session("%s_1" % env.testname(t), sec = sec)
    sess1.client.cb_pre_hook(OP_CB_RECALL, pre_hook)
    sess1.client.cb_post_hook(OP_CB_RECALL, post_hook)
    if sec2:
        sess1.compound([op.backchannel_ctl(env.c1.prog, sec2)])
    fh = _create_file_with_deleg(sess1, env.testname(t), openaccess | want)
    sess2 = env.c1.new_client_session("%s_2" % env.testname(t))
    claim = open_claim4(CLAIM_NULL, env.testname(t))
    owner = open_owner4(0, "My Open Owner 2")
    how = openflag4(OPEN4_NOCREATE)
    open_op = op.open(0, breakaccess, OPEN4_SHARE_DENY_NONE, owner, how, claim)
    slot = sess2.compound_async(env.home + [open_op])
    # Wait for recall, and return delegation
    recall.wait() # STUB - deal with timeout
    # Getting here means CB_RECALL reply is in the send queue.
    # Give it a moment to actually be sent
    env.sleep(.1)
    res = sess1.compound([op.putfh(fh), op.delegreturn(recall.stateid)])
    check(res)
    # Now get OPEN reply
    res = sess2.listen(slot)
    checklist(res, [NFS4_OK, NFS4ERR_DELAY])
    return recall
示例#28
0
def _try_unknown(t, c, path):
    ops = c.use_obj(path) + [c.getattr([1000])]
    res = c.compound(ops)
    check(res, msg="GETTATTR with unknown attr")
    attrs = res.resarray[-1].obj_attributes
    if attrs:
        t.fail("GETTATTR with unknown attr returned %s" % str(attrs))
示例#29
0
def testInodeLocking(t, env):
    """SETATTR: This causes printk message due to inode locking bug

    log shows - nfsd: inode locked twice during operation.
    Sporadic system crashes can occur after running this test

    FLAGS: setattr all
    DEPEND: MODE MKDIR MKFILE
    CODE: SATT13
    """
    #t.fail("Test set to fail without running.  Currently causes "
    #       "inode corruption leading to sporadic system crashes.")
    c = env.c1
    c.init_connection()
    basedir = c.homedir + [t.code]
    res = c.create_obj(basedir)
    check(res)
    fh, stateid = c.create_confirm(t.code, basedir + ['file'])
    
    # In a single compound statement, setattr on dir and then
    # do a state operation on a file in dir (like write or remove)
    ops = c.use_obj(basedir) + [c.setattr({FATTR4_MODE:0754})]
    ops += [c.lookup_op('file'), c.write_op(stateid, 0, 0, 'blahblah')]
    res = c.compound(ops)
    check(res, msg="SETATTR on dir and state operation on file in dir")
示例#30
0
def testManyClaims(t, env):
    """REBOOT test

    FLAGS: reboot
    DEPEND: MKDIR MKFILE
    CODE: REBT2
    """
    c = env.c1
    clientcount = 5
    pid = str(os.getpid())
    basedir = c.homedir + [t.code]
    res = c.create_obj(basedir)
    check(res, msg="Creating test directory %s" % t.code)
    # Make lots of client ids
    fhdict = {}
    idlist = ["pynfs%s%06i" % (pid, x) for x in range(clientcount)]
    badids = ["badpynfs%s%06i" % (pid, x) for x in range(clientcount)]
    for id in idlist:
        c.init_connection(id)
        fh, stateid = c.create_confirm(t.code, basedir + [id])
        fhdict[id] = fh
    sleeptime = _waitForReboot(c, env)
    try:
        # Lots of reclaims
        badfh = fhdict[idlist[-1]]
        for goodid, badid in zip(idlist, badids):
            c.init_connection(goodid)
            res = c.open_file(t.code, fhdict[goodid], claim_type=CLAIM_PREVIOUS, deleg_type=OPEN_DELEGATE_NONE)
            check(res, msg="Reclaim with valid clientid %s" % goodid)
            c.init_connection(badid)
            res = c.open_file(t.code, badfh, claim_type=CLAIM_PREVIOUS, deleg_type=OPEN_DELEGATE_NONE)
            checklist(res, [NFS4ERR_NO_GRACE, NFS4ERR_RECLAIM_BAD], "Reclaim with bad clientid %s" % badid)
    finally:
        env.sleep(sleeptime, "Waiting for grace period to end")
示例#31
0
def testOpenRemoveUnconfirmed(t, env):
    """ OPEN and REMOVE without confirming

    FLAGS: open remove all
    DEPEND: MKFILE
    CODE: OPENREMOVE
    """

    c = env.c1
    c.init_connection()
    res = c.create_file(t.code, deny=OPEN4_SHARE_DENY_BOTH, mode=GUARDED4)
    check(res, msg="creating")
    res = c.remove_obj(c.homedir, t.code)
    check(res, msg="removing")
    res = c.create_file(t.code, deny=OPEN4_SHARE_DENY_BOTH, mode=GUARDED4)
    check(res, msg="creating2")
示例#32
0
def testSecondServer(t, env):
    """ SECONDSERVER1 - Tests the "--secondserver" parameter

    FLAGS: clustered
    DEPEND:
    CODE: SECONDSERV1
    """

    if not env.opts.secondserver:
        t.fail("SECONDSERV1 test being skipped: Second server not defined!")

    c1 = env.c1
    c1.init_connection()

    # XXX Using c1node2 here can cause problems when passing in the same server
    # for secondserver as the first server.
    c3node2 = env.c3node2
    c3node2.init_connection()

    # Use the second server: create, close and remove the file.
    print "creating/removing on second server"
    fh1, stateid1 = c3node2.create_confirm(t.code, c3node2.homedir + [t.code])
    res = c3node2.close_file(t.code, fh1, stateid1)
    check(res)
    res = c3node2.remove_obj(c3node2.homedir, t.code)
    check(res)

    # Create/close a file from connection 1
    print "creating on first server"
    fh1, stateid1 = c1.create_confirm(t.code, c1.homedir + [t.code])
    res = c1.close_file(t.code, fh1, stateid1)
    check(res)

    # Remove the file from connection 2
    print "removing on second server"
    res = c3node2.remove_obj(c3node2.homedir, t.code)
    check(res)
示例#33
0
def testSplitCommit(t, env):
    """Check for proper handling of disjoint LAYOUTCOMMIT.opaque

    FLAGS: block
    CODE: BLOCK4
    """
    sess = env.c1.new_client_session(env.testname(t),
                                     flags=EXCHGID4_FLAG_USE_PNFS_MDS)
    # Create the file
    res = create_file(sess, env.testname(t))
    check(res)
    # Get layout 1
    fh = res.resarray[-1].object
    open_stateid = res.resarray[-2].stateid
    print open_stateid
    ops = [
        op.putfh(fh),
        op.layoutget(False, LAYOUT4_BLOCK_VOLUME, LAYOUTIOMODE4_RW, 0,
                     2 * 8192, 2 * 8192, open_stateid, 0xffff)
    ]
    res = sess.compound(ops)
    check(res)

    lo_stateid1 = res.resarray[-1].logr_stateid
    print lo_stateid1
    # Parse opaque to get info for commit
    # STUB not very general
    layout = res.resarray[-1].logr_layout[-1]
    p = BlockUnpacker(layout.loc_body)
    opaque = p.unpack_pnfs_block_layout4()
    p.done()
    dev = opaque.blo_extents[-1].bex_vol_id
    extent1 = pnfs_block_extent4(dev, 0, 8192, 0, PNFS_BLOCK_READWRITE_DATA)
    extent2 = pnfs_block_extent4(dev, 8192, 8192, 0, PNFS_BLOCK_READWRITE_DATA)

    p = BlockPacker()
    p.pack_pnfs_block_layoutupdate4(
        pnfs_block_layoutupdate4([extent1, extent2]))
    time = newtime4(True, get_nfstime())
    ops = [
        op.putfh(fh),
        op.layoutcommit(0, 2 * 8192, False, lo_stateid1,
                        newoffset4(True, 2 * 8192 - 1), time,
                        layoutupdate4(LAYOUT4_BLOCK_VOLUME, p.get_buffer()))
    ]
    res = sess.compound(ops)
    check(res)
示例#34
0
def testBadLockSeqid3(t, env):
    """LOCKU with a bad lockseqid should return NFS4ERR_BAD_SEQID

#    FLAGS: locku seqid all
    FLAGS: ganesha
    DEPEND: MKFILE
    CODE: LKU6c
    """
    c = env.c1
    c.init_connection()
    fh, stateid = c.create_confirm(t.code)
    res1 = c.lock_file(t.code, fh, stateid, 0, 50)
    check(res1)
    res2 = c.relock_file(1, fh, res1.lockid, 100, 50)
    check(res2)
    res3 = c.unlock_file(1, fh, res2.lockid)
    check(res3, NFS4ERR_BAD_SEQID, "LOCKU with a bad lockseqid=1")
示例#35
0
def testStateid1(t, env):
    """Check for proper sequence handling in layout stateids.

    FLAGS: block
    CODE: BLOCK1
    """
    sess = env.c1.new_client_session(env.testname(t),
                                     flags=EXCHGID4_FLAG_USE_PNFS_MDS)
    # Create the file
    res = create_file(sess, env.testname(t))
    check(res)
    # Get layout 1
    fh = res.resarray[-1].object
    open_stateid = res.resarray[-2].stateid
    print open_stateid
    ops = [
        op.putfh(fh),
        op.layoutget(False, LAYOUT4_BLOCK_VOLUME, LAYOUTIOMODE4_RW, 0, 8192,
                     8192, open_stateid, 0xffff)
    ]
    res = sess.compound(ops)
    check(res)
    lo_stateid = res.resarray[-1].logr_stateid
    print lo_stateid
    if lo_stateid.seqid != 1:
        # From draft23 12.5.2 "The first successful LAYOUTGET processed by
        # the server using a non-layout stateid as an argument MUST have the
        # "seqid" field of the layout stateid in the response set to one."
        fail("Expected stateid.seqid==1, got %i" % lo_stateid.seqid)
    for i in range(6):
        # Get subsequent layouts
        ops = [
            op.putfh(fh),
            op.layoutget(False, LAYOUT4_BLOCK_VOLUME, LAYOUTIOMODE4_RW,
                         (i + 1) * 8192, 8192, 8192, lo_stateid, 0xffff)
        ]
        res = sess.compound(ops)
        check(res)
        lo_stateid = res.resarray[-1].logr_stateid
        print lo_stateid
        if lo_stateid.seqid != i + 2:
            # From draft23 12.5.3 "After the layout stateid is established,
            # the server increments by one the value of the "seqid" in each
            # subsequent LAYOUTGET and LAYOUTRETURN response,
            fail("Expected stateid.seqid==%i, got %i" %
                 (i + 2, lo_stateid.seqid))
示例#36
0
def testOldLockStateid(t, env):
    """LOCK with old lock stateid should return NFS4ERR_OLD_STATEID

    FLAGS: lock oldid all
    DEPEND: MKFILE
    CODE: LOCK9a
    """
    c = env.c1
    c.init_connection()
    fh, stateid = c.create_confirm(t.code)
    res1 = c.lock_file(t.code, fh, stateid, 0, 25)
    check(res1)
    res2 = c.relock_file(1, fh, res1.lockid, 50, 25)
    check(res2)
    res3 = c.relock_file(2, fh, res1.lockid, 100, 25)
    check(res3, NFS4ERR_OLD_STATEID, "LOCK with old lockstateid",
          [NFS4ERR_BAD_STATEID])
示例#37
0
def testGrabLock2(t, env):
    """MULTIPLE clients trying to get lock

    FLAGS: lock all
    DEPEND: MKFILE
    CODE: LOCK15
    """
    c1 = env.c1
    c1.init_connection()
    c2 = env.c2
    c2.init_connection()
    file = c1.homedir + [t.code]
    # Client1 creates a file
    fh1, stateid1 = c1.create_confirm('owner1',
                                      file,
                                      access=OPEN4_SHARE_ACCESS_BOTH,
                                      deny=OPEN4_SHARE_DENY_WRITE)
    # Client2 opens the file
    fh2, stateid2 = c2.open_confirm('owner2',
                                    file,
                                    access=OPEN4_SHARE_ACCESS_READ,
                                    deny=OPEN4_SHARE_DENY_NONE)
    # Client1 locks the file
    res1 = c1.lock_file('owner1', fh1, stateid1, type=WRITE_LT)
    check(res1)
    # Client2 tries to lock the file, should fail
    res2 = c2.lock_file('owner2', fh2, stateid2, type=READ_LT)
    check(res2, NFS4ERR_DENIED,
          "Getting read lock when another owner has write lock")
    # Client1 unlocks the file
    res1 = c1.unlock_file(1, fh1, res1.lockid)
    check(res1)
    # Client2 tries to lock the file, should work now
    res2 = c2.lock_file('owner2', fh2, stateid2, type=READ_LT)
    check(res2,
          msg="Getting read lock after another owner has released write lock")
示例#38
0
def testGraceSeqid(t, env):
    """Make sure NFS4ERR_GRACE bumps seqid

    FLAGS: reboot
    DEPEND:
    CODE: REBT11
    """
    c = env.c1
    c.init_connection()
    fh, stateid = c.create_confirm(t.code)
    sleeptime = _waitForReboot(c)
    try:
        c.init_connection()
        res = c.open_file(t.code, fh, claim_type=CLAIM_PREVIOUS,
                       deleg_type=OPEN_DELEGATE_NONE)
        check(res, msg="Reclaim using newly created clientid")
        res = c.open_file(t.code)
        check(res, NFS4ERR_GRACE, "First OPEN during grace period")
        res = c.open_file(t.code)
        check(res, NFS4ERR_GRACE, "Second OPEN during grace period")
    finally:
        env.sleep(sleeptime, "Waiting for grace period to end")
    res = c.open_file(t.code)
    check(res, NFS4_OK, "OPEN after grace period")
示例#39
0
def testDots(t, env):
    """REMOVE on . or .. should return NFS4ERR_NOENT or NFS4ERR_BADNAME

    FLAGS: remove dots all
    DEPEND: MKDIR
    CODE: RM7
    """
    c = env.c1
    basedir = c.homedir + [t.code]
    res = c.create_obj(basedir)
    check(res)
    ops = c.use_obj(basedir) + [c.remove_op('.')]
    res = c.compound(ops)
    check(res, NFS4ERR_BADNAME, "REMOVE nonexistant '.'", [NFS4ERR_NOENT])
    ops = c.use_obj(basedir) + [c.remove_op('..')]
    res = c.compound(ops)
    check(res, NFS4ERR_BADNAME, "REMOVE nonexistant '..'", [NFS4ERR_NOENT])
示例#40
0
def testFlexLayoutReturnFile(t, env):
    """
    Return a file's layout

    FLAGS: flex
    DEPEND: FFGLO1
    CODE: FFLOR1
    """
    sess = env.c1.new_pnfs_client_session(env.testname(t))
    # Create the file
    res = create_file(sess, env.testname(t))
    check(res)
    # Get layout
    fh = res.resarray[-1].object
    open_stateid = res.resarray[-2].stateid
    ops = [
        op.putfh(fh),
        op.layoutget(False, LAYOUT4_FLEX_FILES, LAYOUTIOMODE4_READ, 0,
                     0xffffffffffffffff, 4196, open_stateid, 0xffff)
    ]
    res = sess.compound(ops)
    check(res)
    # Return layout
    layout_stateid = res.resarray[-1].logr_stateid
    ops = [
        op.putfh(fh),
        op.layoutreturn(
            False, LAYOUT4_FLEX_FILES, LAYOUTIOMODE4_ANY,
            layoutreturn4(
                LAYOUTRETURN4_FILE,
                layoutreturn_file4(0, 0xffffffffffffffff, layout_stateid, "")))
    ]
    res = sess.compound(ops)
    check(res)
    res = close_file(sess, fh, stateid=open_stateid)
    check(res)
示例#41
0
def testDisconnect3(t, env):
    """DISCONNECT - Very similar to testDisconnect2, but with multiple
                    confirmed clientids. Register several clientids and open a
                    file with the middle one. Then disconnect and be able to
                    open the file again, if disconnect causes lease expiration.

    FLAGS: multiconn disconnect timed all
    DEPEND: INIT DISCONN2 MULTICONN
    CODE: DISCONN3
    """
    cid1 = 'pynfs%i_%s_1' % (os.getpid(), t.code)
    cid2 = 'pynfs%i_%s_2' % (os.getpid(), t.code)
    cid3 = 'pynfs%i_%s_3' % (os.getpid(), t.code)
    cid4 = 'pynfs%i_%s_4' % (os.getpid(), t.code)
    cid5 = 'pynfs%i_%s_5' % (os.getpid(), t.code)
    cid6 = 'pynfs%i_%s_6' % (os.getpid(), t.code)

    c = env.c1
    c2 = env.get_and_init_secondconn(c)

    c.init_connection(id=cid1)
    c.init_connection(id=cid2)
    c.init_connection(id=cid3)

    # Open file once, make sure it can't be opened twice
    fh, stateid = c.create_confirm(t.code, deny=OPEN4_SHARE_DENY_BOTH)
    res = c2.open_file(t.code, access=OPEN4_SHARE_ACCESS_WRITE)
    check(res, NFS4ERR_SHARE_DENIED, "Second OPEN should be denied")

    # Register a few more clientids
    c.init_connection(id=cid4)
    c.init_connection(id=cid5)

    # Check that the open is still denied
    res = c2.open_file(t.code, access=OPEN4_SHARE_ACCESS_WRITE)
    check(res, NFS4ERR_SHARE_DENIED, "Second OPEN should be denied")

    # Disconnect from connection 1
    c.reconnect()
    sleeptime = c.getLeaseTime() * 3 / 2
    env.sleep(sleeptime)

    # Open file again - should work
    c2.init_connection(id=cid6)
    res = c2.open_file(t.code, access=OPEN4_SHARE_ACCESS_WRITE)
    check(res, msg="Reconnect did not expire leased data.")
示例#42
0
def testUnConfReplaced(t, env):
    """The server has no confirmed { *, x, *, *, * } for x.  It may or
       may not have recorded an unconfirmed { u, x, c, l, s }, where l
       may or may not equal k, and u may or may not equal v.  Any
       unconfirmed record { u, x, c, l, * }, regardless of whether u == v
       or l == k, is replaced with an unconfirmed record { v, x, d, k, t}
       where d != c, t != s.

    FLAGS: setclientid all
    DEPEND: INIT
    CODE: CID4e
    """
    c1 = env.c1
    clid = "Clid_for_%s_pid=%i" % (t.code, os.getpid())

    # unconfirmed { w, x, d, m, t }
    ops = [c1.setclientid(clid, verifier="unconf")]
    res = c1.compound(ops)
    check(res)

    uclientid = res.resarray[0].switch.switch.clientid
    uconfirm = res.resarray[0].switch.switch.setclientid_confirm

    # request { v, x, c, k, s } --> unconfirmed { v, x, d, k, t }
    ops = [c1.setclientid(clid, verifier="diff")]
    res = c1.compound(ops)
    check(res)

    tclientid = res.resarray[0].switch.switch.clientid
    tconfirm = res.resarray[0].switch.switch.setclientid_confirm

    # removes the unconfirmed { w, x, d, m, t }
    ops = [c1.setclientid_confirm_op(uclientid, uconfirm)]
    res = c1.compound(ops)
    check(res, NFS4ERR_STALE_CLIENTID)

    # (d != c, t != s)
    if tconfirm == '\x00\x00\x00\x00\x00\x00\x00\x00':
        t.fail("Got clientid confirm verifier with all zero!")

    if uclientid == tclientid:
        t.fail("Return a same clientID for different verifier!")

    if tconfirm == uconfirm:
        t.fail("Return a same confirm for different verifier!")
示例#43
0
def testNotEmpty(t, env):
    """REMOVE called on nonempty directory should return NFS4ERR_NOTEMPTY

    FLAGS: remove all
    DEPEND: MKDIR
    CODE: RM8
    """
    c = env.c1
    # Create non-empty dir
    basedir = c.homedir + [t.code]
    res = c.create_obj(basedir)
    check(res)
    res = c.create_obj(basedir + [t.code])
    check(res)
    # Now try to remove it
    ops = c.use_obj(c.homedir) + [c.remove_op(t.code)]
    res = c.compound(ops)
    check(res, NFS4ERR_NOTEMPTY, "REMOVE called on nonempty directory")

    #######################################

    def testValidNames(t, env):
        """REMOVE should succeed on all legal names

        Extra test

        Comments: This test tries REMOVE on all names returned from try_file_names()
        """
        # This test tests the lookup part of REMOVE
        self.init_connection()

        # Save files for REMOVE
        try:
            (accepted_names,
             rejected_names) = self.try_file_names(remove_files=0)
        except SkipException, e:
            self.skip(e)

        # Ok, lets try REMOVE on all accepted names
        lookup_dir_ops = self.ncl.lookup_path(self.tmp_dir)
        for filename in accepted_names:
            ops = [self.ncl.putrootfh_op()] + lookup_dir_ops
            ops.append(self.ncl.remove_op(filename))
            res = self.ncl.do_ops(ops)
            self.assert_OK(res)
示例#44
0
def testEMCGetLayout(t, env):
    """Verify layout handling

    Debugging test that looks for pre-existing file (server2fs1/dump.eth)
    so we don't have to worry about creating a file.

    FLAGS: 
    CODE: GETLAYOUT100
    """
    # Make sure E_ID returns MDS capabilities
    c1 = env.c1.new_client(env.testname(t), flags=EXCHGID4_FLAG_USE_PNFS_MDS)
    if not c1.flags & EXCHGID4_FLAG_USE_PNFS_MDS:
        fail("Server can not be used as pnfs metadata server")
    sess = c1.create_session()
    # Test that fs handles block layouts
    ops = use_obj(env.opts.path) + [op.getattr(1 << FATTR4_FS_LAYOUT_TYPE)]
    res = sess.compound(ops)
    check(res)
    if FATTR4_FS_LAYOUT_TYPE not in res.resarray[-1].obj_attributes:
        fail("fs_layout_type not available")
    if LAYOUT4_BLOCK_VOLUME not in res.resarray[-1].obj_attributes[
            FATTR4_FS_LAYOUT_TYPE]:
        fail("layout_type does not contain BLOCK")
    # Create the file
    file = ["server2fs1", "dump.eth"]
    res = open_file(sess, env.testname(t), file)
    check(res)
    # Get layout
    fh = res.resarray[-1].object
    stateid = res.resarray[-2].stateid
    stateid.seqid = 0
    ops = [
        op.putfh(fh),
        op.layoutget(False, LAYOUT4_BLOCK_VOLUME, LAYOUTIOMODE4_READ, 0,
                     0xffffffffffffffff, 0, stateid, 0xffff)
    ]
    res = sess.compound(ops)
    check(res)
    # Parse opaque
    for layout in res.resarray[-1].logr_layout:
        if layout.loc_type == LAYOUT4_BLOCK_VOLUME:
            p = BlockUnpacker(layout.loc_body)
            opaque = p.unpack_pnfs_block_layout4()
            p.done()
            print opaque
示例#45
0
def testReplayCache002(t, env):
    """Send two successful non-idempotent compounds with same seqid

    FLAGS: sequence all
    CODE: SEQ9b
    """
    sess1 = env.c1.new_client_session(env.testname(t))
    res = create_file(sess1, "%s_1" % env.testname(t))
    check(res)
    ops = env.home + [op.savefh(),\
          op.rename("%s_1" % env.testname(t), "%s_2" % env.testname(t))]
    res1 = sess1.compound(ops, cache_this=True)
    check(res1)
    res2 = sess1.compound(ops, seq_delta=0)
    check(res2)
    res1.tag = res2.tag = ""
    if not nfs4lib.test_equal(res1, res2):
        fail("Replay results not equal")
示例#46
0
def testOldLockStateid(t, env):
    """LOCKU with old lock stateid should return NFS4ERR_OLD_STATEID

    FLAGS: locku oldid all
    DEPEND: MKFILE
    CODE: LKU7
    """
    c = env.c1
    c.init_connection()
    fh, stateid = c.create_confirm(t.code)
    res1 = c.lock_file(t.code, fh, stateid)
    check(res1)
    res2 = c.unlock_file(1, fh, res1.lockid)
    check(res2)
    # Try to unlock again with old stateid
    res3 = c.unlock_file(2, fh, res1.lockid)
    check(res3, NFS4ERR_OLD_STATEID, "LOCKU with old lockstateid",
          [NFS4ERR_BAD_STATEID])
示例#47
0
def testModeChange(t, env):
    """OPEN conflicting with mode bits

    FLAGS: open all
    DEPEND: MODE MKFILE
    CODE: OPEN17
    """
    c = env.c1
    c.init_connection()
    fh, stateid = c.create_confirm(t.code)
    res = c.close_file(t.code, fh, stateid)
    check(res)
    ops = c.use_obj(fh) + [c.setattr({FATTR4_MODE:0})]
    res = c.compound(ops)
    check(res, msg="Setting mode of file %s to 000" % t.code)
    res = c.open_file(t.code, access=OPEN4_SHARE_ACCESS_BOTH,
                      deny=OPEN4_SHARE_DENY_NONE)
    check(res, NFS4ERR_ACCESS, "Opening file %s with mode=000" % t.code)
示例#48
0
def testConfUnConfDiffVerifier2(t, env):
    """Whether w == v or w != v makes no difference.

    FLAGS: setclientid all
    DEPEND: INIT
    CODE: CID4d
    """
    c1 = env.c1
    clid = "Clid_for_%s_pid=%i" % (t.code, os.getpid())

    # confirmed { u, x, c, l, s }
    (cclientid, cconfirm) = c1.init_connection(clid, verifier=c1.verifier)

    # unconfirmed { w, x, d, m, t }
    ops = [c1.setclientid(clid, verifier="unconf")]
    res = c1.compound(ops)
    check(res)

    uclientid = res.resarray[0].switch.switch.clientid
    uconfirm = res.resarray[0].switch.switch.setclientid_confirm

    # request { v, x, c, k, s } --> unconfirmed { v, x, e, k, r }
    # (v != w)
    ops = [c1.setclientid(clid, verifier="testconf")]
    res = c1.compound(ops)
    check(res)

    tclientid = res.resarray[0].switch.switch.clientid
    tconfirm = res.resarray[0].switch.switch.setclientid_confirm

    # removes the unconfirmed { w, x, d, m, t }
    ops = [c1.setclientid_confirm_op(uclientid, uconfirm)]
    res = c1.compound(ops)
    check(res, NFS4ERR_STALE_CLIENTID)

    # (e != d, e != c, r != t, r != s)
    if tconfirm == '\x00\x00\x00\x00\x00\x00\x00\x00':
        t.fail("Got clientid confirm verifier with all zero!")

    if cclientid == tclientid or uclientid == tclientid:
        t.fail("Return a same clientID for different verifier!")

    if tconfirm == cconfirm or tconfirm == uconfirm:
        t.fail("Return a same confirm for different verifier!")
示例#49
0
def testFile(t, env):
    """RELEASE_LOCKOWNER - basic test

    FLAGS: releaselockowner all
    DEPEND:
    CODE: RLOWN1
    """
    c = env.c1
    c.init_connection()
    fh, stateid = c.create_confirm(t.code)
    res = c.lock_file(t.code, fh, stateid, lockowner="lockowner_RLOWN1")
    check(res)
    res = c.unlock_file(1, fh, res.lockid)
    check(res)

    # Release lockowner
    owner = lock_owner4(c.clientid, "lockowner_RLOWN1")
    res = c.compound([c.release_lockowner_op(owner)])
    check(res)
示例#50
0
def testUnaccessibleDir(t, env):
    """READDIR with (cfh) in unaccessible directory 

    FLAGS: readdir all mode000
    DEPEND: MKDIR MODE
    CODE: RDDR11
    """
    c = env.c1
    path = c.homedir + [t.code]
    c.maketree([t.code, ['hidden']])
    ops = c.use_obj(path) + [c.setattr({FATTR4_MODE:0})]
    res = c.compound(ops)
    check(res, msg="Setting mode=0 on directory %s" % t.code)
    ops = c.use_obj(path) + [c.readdir()]
    res = c.compound(ops)
    if env.opts.uid == 0:
	    check(res, [NFS4_OK, NFS4ERR_ACCESS], "READDIR of directory with mode=000")
    else:
	    check(res, NFS4ERR_ACCESS, "READDIR of directory with mode=000")
示例#51
0
def testStaleHandle(t, env):
    """PUTFH which nolonger exists should return NFS4ERR_STALE

    FLAGS: putfh all
    DEPEND: MKFILE
    CODE: PUTFH3
    """
    c = env.c1
    c.init_connection()
    # Create a stale fh
    stale_fh, stateid = c.create_confirm(t.code)
    res = c.close_file(t.code, stale_fh, stateid)
    check(res)
    ops = c.use_obj(c.homedir) + [c.remove_op(t.code)]
    res = c.compound(ops)
    check(res)
    # Now try to use it
    res = c.compound([c.putfh_op(stale_fh)])
    check(res, NFS4ERR_STALE, "Using a stale fh")
示例#52
0
def testUnaccessibleDir(t, env):
    """LOOKUP with (cfh) in unaccessible directory 

    FLAGS: lookup all mode000
    DEPEND: MKDIR MODE
    CODE: LOOK9
    """
    c = env.c1
    path = c.homedir + [t.code]
    c.maketree([t.code, ['hidden']])
    ops = c.use_obj(path) + [c.setattr({FATTR4_MODE: 0})]
    res = c.compound(ops)
    check(res, msg="Setting mode=0 on directory %s" % t.code)
    res = c.compound(c.use_obj(path + ['hidden']))
    if env.opts.uid == 0:
        check(res, [NFS4_OK, NFS4ERR_ACCESS],
              "LOOKUP off of dir with mode=000")
    else:
        check(res, NFS4ERR_ACCESS, "LOOKUP off of dir with mode=000")
示例#53
0
def testNoConfirm(t, env):
    """SETCLIENTID - create a stale clientid, and use it.

    FLAGS: setclientid all
    DEPEND: INIT
    CODE: CID6
    """
    c = env.c1
    id = "Clientid_for_%s_pid=%i" % (t.code, os.getpid())
    res = c.compound([c.setclientid(id)])
    check(res)
    res = c.compound([c.setclientid(id, '')])
    check(res)
    c.clientid = res.resarray[0].switch.switch.clientid
    ops = c.use_obj(c.homedir)
    ops += [c.open(t.code, t.code, OPEN4_CREATE)]
    res = c.compound(ops)
    check(res, NFS4ERR_STALE_CLIENTID,
          "OPEN using clientid that was never confirmed")
示例#54
0
def testNfs3Create_UidRoot(t, env):
    """ Create a file with uid_set=1 as root

    FLAGS: nfsv3 create all
    DEPEND:
    CODE: CREATE6
    """
    ### Setup Phase ###
    c = env.rootclient
    test_file = t.name + "_file_1"
    test_dir = t.name + "_dir_1"
    mnt_fh = homedir_fh(env.mc, env.c1)
    res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
    check(res, msg="MKDIR - test dir %s" % test_dir)
    test_dir_fh = res.resok.obj.handle.data

    ### Execution Phase ###
    res = env.c1.create(test_dir_fh,
                        test_file,
                        file_mode_set=1,
                        file_mode_val=0777,
                        uid_set=1,
                        uid_val=1234,
                        gid_set=1,
                        gid_val=5678)
    test_file_fh = res.resok.obj.handle.data
    #print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"

    ### Verification Phase ###
    check(res, msg="CREATE - file %s" % test_file)
    res = env.c1.lookup(test_dir_fh, test_file)
    check(res, msg="LOOKUP - file %s" % test_file)
    res = env.c1.getattr(test_file_fh)
    # Allow maproot=nobody
    checkvalid(res.attributes.uid == 1234 or  \
      res.attributes.uid == 65534,            \
      "CREATE - file %s (uid=%d expected %d)" \
      % (test_file, res.attributes.uid, 1234))
    checkvalid(res.attributes.gid == 5678 or  \
      res.attributes.gid == 0,                \
      "CREATE - file %s (gid=%d expected %d)" \
      % (test_file, res.attributes.gid, 5678))
示例#55
0
def testOverlap(t, env):
    """LOCKT against your own lock should return NFS4_OK or NFS4ERR_LOCK_RANGE

    FLAGS: lockt all
    DEPEND: MKFILE
    CODE: LKTOVER
    """
    c = env.c1
    c.init_connection()
    fh, stateid = c.create_confirm(t.code)
    lockowner = "lockowner_LKTOVER"
    res = c.lock_file(t.code, fh, stateid, 100, 50, lockowner=lockowner)
    check(res, msg="Locking file %s" % t.code)
    res = c.lock_test(fh, 100, 50, tester=lockowner)
    check(res, msg="LOCKT against own exactly matching lock")
    res = c.lock_test(fh, 75, 50, tester=lockowner)
    check(res, [NFS4_OK, NFS4ERR_LOCK_RANGE],
              "LOCKT against own overlapping lock")
    if res.status == NFS4ERR_LOCK_RANGE:
        t.fail_support("Server does not support lock consolidation")
示例#56
0
def testCloseNoStateid(t, env):
    """test current state id processing by having CLOSE
       without operation which provides stateid

    FLAGS: currentstateid all
    CODE: CSID6
    """
    sess1 = env.c1.new_client_session(env.testname(t))

    res = create_file(sess1, env.testname(t))
    check(res)
    fh = res.resarray[-1].object
    stateid = res.resarray[-2].stateid

    res = sess1.compound([op.putfh(fh), op.close(0, current_stateid)])
    check(res, [NFS4ERR_STALE_STATEID, NFS4ERR_BAD_STATEID])

    # Test passed, now cleanup!
    res = sess1.compound([op.putfh(fh), op.close(0, stateid)])
    check(res)
示例#57
0
def testStaleHandle(t, env):
    """PUTFH which nolonger exists should return NFS4ERR_STALE

    FLAGS: putfh ganesha
    DEPEND: MKFILE
    CODE: PUTFH3
    """
    c = env.c1
    c.init_connection()
    # Create a stale fh
    stale_fh, stateid = c.create_confirm(t.code)
    res = c.close_file(t.code, stale_fh, stateid)
    check(res)
    ops = c.use_obj(c.homedir) + [c.remove_op(t.code)]
    res = c.compound(ops)
    check(res)
    # Now try to use it; but note a server may still allow use and
    # that's not necessarily a protocol violation; disabling this test
    # by default until we think of something better.
    res = c.compound([c.putfh_op(stale_fh)])
    check(res, NFS4ERR_STALE, "Using a stale fh")
示例#58
0
def testReplay(t, env):
    """Send the same OPEN twice

    FLAGS: open seqid all
    DEPEND: MKFILE
    CODE: OPEN30
    """
    c = env.c1
    c.init_connection()
    file = c.homedir + [t.code]
    owner = t.code
    fh, stateid = c.create_confirm(owner, file, deny=OPEN4_SHARE_DENY_NONE)
    res = c.close_file(owner, fh, stateid)
    seqid = c.get_seqid(owner)
    res = c.open_file(owner, file, deny=OPEN4_SHARE_DENY_BOTH)
    check(res)
    c.seqid[owner] -= 1
    res = c.open_file(owner, file, deny=OPEN4_SHARE_DENY_BOTH)
    check(res, msg="replayed open should succeed again")
    res = c.open_file(owner, file, deny=OPEN4_SHARE_DENY_BOTH)
    check(res, NFS4ERR_SHARE_DENIED, msg="non-replayed open should fail")
示例#59
0
def testExistingFile(t, env):
    """LOCK a regular file that was opened w/o create

    Note several servers return _ERR_OPENMODE, but this is not a legit
    option. (FRED - why not?)
    
    FLAGS: lock all
    DEPEND: MKFILE LOCK1
    CODE: LOCK3
    """
    c = env.c1
    c.init_connection()
    fh, stateid = c.create_confirm(t.code)
    res = c.close_file(t.code, fh, stateid)
    check(res)
    fh, stateid = c.open_confirm(t.code, access=OPEN4_SHARE_ACCESS_BOTH,
                                 deny=OPEN4_SHARE_DENY_NONE)
    res = c.lock_file(t.code, fh, stateid)
    check(res, msg="Locking file %s" % t.code)
    res = c.lock_test(fh)
    check(res, NFS4ERR_DENIED, "Testing file %s is locked" % t.code)
示例#60
0
def testDots(t, env):
    """LINK with . or .. should succeed or return NFSERR_BADNAME

    FLAGS: link dots all
    DEPEND: LINKS LOOKFILE MKDIR
    CODE: LINK9
    """
    c = env.c1
    dir = c.homedir + [t.code]
    res = c.create_obj(dir)
    check(res)
    res1 = c.link(env.opts.usefile, dir + ['.'])
    check(res1, [NFS4_OK, NFS4ERR_BADNAME],
          "Trying to make a hardlink named '.'")
    res2 = c.link(env.opts.usefile, dir + ['..'])
    check(res2, [NFS4_OK, NFS4ERR_BADNAME],
          "Trying to make a hardlink named '..'")
    if res1.status == NFS4_OK or res2.status == NFS4_OK:
        t.pass_warn("Allowed creation of hardlink named '.' or '..'")

###################################################

# FRED - make test to invoke _MLINK

    def testNamingPolicy(self):
        """LINK should obey OPEN file name creation policy

        Extra test
        """
        self.init_connection()

        try:
            (x, rejected_names_open) = self.try_file_names(
                creator=self.create_via_open)
            (x, rejected_names_link) = self.try_file_names(
                creator=self.create_via_link)
            self.failIf(rejected_names_open != rejected_names_link,
                        "LINK does not obey OPEN naming policy")
        except SkipException, e:
            self.skip(e)