示例#1
0
 def test_fit_charge_to_fully_bound_charge(self):
     fit = Fit()
     fit_other = Fit()
     module = ModuleHigh(self.mktype().id, state=State.active, charge=None)
     charge = Charge(self.mktype().id)
     module_other = ModuleHigh(self.mktype().id,
                               state=State.active,
                               charge=None)
     charge_other = Charge(self.mktype().id)
     fit.modules.high.append(module)
     fit_other.modules.high.append(module_other)
     module.charge = charge
     module_other.charge = charge_other
     # Action
     with self.assertRaises(ValueError):
         module.charge = charge_other
     # Verification
     self.assertIs(module.charge, charge)
     self.assertIs(module_other.charge, charge_other)
     # Cleanup
     self.assert_item_buffers_empty(module)
     self.assert_item_buffers_empty(charge)
     self.assert_item_buffers_empty(module_other)
     self.assert_item_buffers_empty(charge_other)
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_solsys_buffers_empty(fit_other.solar_system)
     self.assert_log_entries(0)
示例#2
0
 def test_non_uniform(self):
     fit = Fit()
     item = Ship(
         self.mktype(
             attrs={
                 AttrId.hp: 10,
                 AttrId.em_dmg_resonance: 0.9,
                 AttrId.therm_dmg_resonance: 0.8,
                 AttrId.kin_dmg_resonance: 0.7,
                 AttrId.expl_dmg_resonance: 0.6,
                 AttrId.armor_hp: 50,
                 AttrId.armor_em_dmg_resonance: 0.4,
                 AttrId.armor_therm_dmg_resonance: 0.6,
                 AttrId.armor_kin_dmg_resonance: 0.8,
                 AttrId.armor_expl_dmg_resonance: 0.9,
                 AttrId.shield_capacity: 600,
                 AttrId.shield_em_dmg_resonance: 1.0,
                 AttrId.shield_therm_dmg_resonance: 0.8,
                 AttrId.shield_kin_dmg_resonance: 0.6,
                 AttrId.shield_expl_dmg_resonance: 0.5
             }).id)
     fit.ship = item
     # Verification
     results = item.get_ehp(DmgProfile(25, 6, 8.333, 1))
     self.assertAlmostEqual(results.hull, 11.957, places=3)
     self.assertAlmostEqual(results.armor, 95.276, places=3)
     self.assertAlmostEqual(results.shield, 685.551, places=3)
     self.assertAlmostEqual(results.total, 792.783, places=3)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#3
0
 def test_worst_em(self):
     fit = Fit()
     item = Ship(
         self.mktype(
             attrs={
                 AttrId.hp: 1,
                 AttrId.em_dmg_resonance: 0.8,
                 AttrId.therm_dmg_resonance: 0.7,
                 AttrId.kin_dmg_resonance: 0.7,
                 AttrId.expl_dmg_resonance: 0.7,
                 AttrId.armor_hp: 10,
                 AttrId.armor_em_dmg_resonance: 0.4,
                 AttrId.armor_therm_dmg_resonance: 0.3,
                 AttrId.armor_kin_dmg_resonance: 0.3,
                 AttrId.armor_expl_dmg_resonance: 0.3,
                 AttrId.shield_capacity: 100,
                 AttrId.shield_em_dmg_resonance: 0.2,
                 AttrId.shield_therm_dmg_resonance: 0.1,
                 AttrId.shield_kin_dmg_resonance: 0.1,
                 AttrId.shield_expl_dmg_resonance: 0.1
             }).id)
     fit.ship = item
     # Verification
     self.assertAlmostEqual(item.worst_case_ehp.hull, 1.25)
     self.assertAlmostEqual(item.worst_case_ehp.armor, 25)
     self.assertAlmostEqual(item.worst_case_ehp.shield, 500)
     self.assertAlmostEqual(item.worst_case_ehp.total, 526.25)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#4
0
 def test_item_inside_value_failure(self):
     fit = Fit()
     fit_other = Fit()
     item1 = ModuleHigh(self.mktype().id)
     item2 = ModuleHigh(self.mktype().id)
     item3 = ModuleHigh(self.mktype().id)
     fit.modules.high.append(item1)
     fit.modules.high.append(item2)
     fit_other.modules.high.append(item3)
     # Action
     with self.assertRaises(ValueError):
         fit.modules.high.insert(1, item3)
     # Verification
     self.assertIs(len(fit.modules.high), 2)
     self.assertIs(fit.modules.high[0], item1)
     self.assertIs(fit.modules.high[1], item2)
     self.assertIs(len(fit_other.modules.high), 1)
     self.assertIs(fit_other.modules.high[0], item3)
     # Cleanup
     self.assert_item_buffers_empty(item1)
     self.assert_item_buffers_empty(item2)
     self.assert_item_buffers_empty(item3)
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_solsys_buffers_empty(fit_other.solar_system)
     self.assert_log_entries(0)
示例#5
0
 def test_uniform(self):
     fit = Fit()
     item = Ship(
         self.mktype(
             attrs={
                 AttrId.hp: 1,
                 AttrId.em_dmg_resonance: 0.8,
                 AttrId.therm_dmg_resonance: 0.8,
                 AttrId.kin_dmg_resonance: 0.8,
                 AttrId.expl_dmg_resonance: 0.8,
                 AttrId.armor_hp: 10,
                 AttrId.armor_em_dmg_resonance: 0.4,
                 AttrId.armor_therm_dmg_resonance: 0.4,
                 AttrId.armor_kin_dmg_resonance: 0.4,
                 AttrId.armor_expl_dmg_resonance: 0.4,
                 AttrId.shield_capacity: 100,
                 AttrId.shield_em_dmg_resonance: 0.2,
                 AttrId.shield_therm_dmg_resonance: 0.2,
                 AttrId.shield_kin_dmg_resonance: 0.2,
                 AttrId.shield_expl_dmg_resonance: 0.2
             }).id)
     fit.ship = item
     # Verification
     results = item.get_ehp(DmgProfile(1, 1, 1, 1))
     self.assertAlmostEqual(results.hull, 1.25)
     self.assertAlmostEqual(results.armor, 25)
     self.assertAlmostEqual(results.shield, 500)
     self.assertAlmostEqual(results.total, 526.25)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#6
0
文件: test_ehp.py 项目: DarkFenX/eos
 def test_non_uniform(self):
     fit = Fit()
     item = Ship(self.mktype(attrs={
         AttrId.hp: 10,
         AttrId.em_dmg_resonance: 0.9,
         AttrId.therm_dmg_resonance: 0.8,
         AttrId.kin_dmg_resonance: 0.7,
         AttrId.expl_dmg_resonance: 0.6,
         AttrId.armor_hp: 50,
         AttrId.armor_em_dmg_resonance: 0.4,
         AttrId.armor_therm_dmg_resonance: 0.6,
         AttrId.armor_kin_dmg_resonance: 0.8,
         AttrId.armor_expl_dmg_resonance: 0.9,
         AttrId.shield_capacity: 600,
         AttrId.shield_em_dmg_resonance: 1.0,
         AttrId.shield_therm_dmg_resonance: 0.8,
         AttrId.shield_kin_dmg_resonance: 0.6,
         AttrId.shield_expl_dmg_resonance: 0.5}).id)
     fit.ship = item
     # Verification
     results = item.get_ehp(DmgProfile(25, 6, 8.333, 1))
     self.assertAlmostEqual(results.hull, 11.957, places=3)
     self.assertAlmostEqual(results.armor, 95.276, places=3)
     self.assertAlmostEqual(results.shield, 685.551, places=3)
     self.assertAlmostEqual(results.total, 792.783, places=3)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#7
0
 def test_item_attr_hp_all_absent(self):
     fit = Fit()
     item = Ship(
         self.mktype(
             attrs={
                 AttrId.em_dmg_resonance: 0.9,
                 AttrId.therm_dmg_resonance: 0.8,
                 AttrId.kin_dmg_resonance: 0.7,
                 AttrId.expl_dmg_resonance: 0.6,
                 AttrId.armor_em_dmg_resonance: 0.4,
                 AttrId.armor_therm_dmg_resonance: 0.6,
                 AttrId.armor_kin_dmg_resonance: 0.8,
                 AttrId.armor_expl_dmg_resonance: 0.9,
                 AttrId.shield_em_dmg_resonance: 1.0,
                 AttrId.shield_therm_dmg_resonance: 0.8,
                 AttrId.shield_kin_dmg_resonance: 0.6,
                 AttrId.shield_expl_dmg_resonance: 0.5
             }).id)
     fit.ship = item
     # Verification
     results = item.get_ehp(DmgProfile(25, 6, 8.333, 1))
     self.assertAlmostEqual(results.hull, 0)
     self.assertAlmostEqual(results.armor, 0)
     self.assertAlmostEqual(results.shield, 0)
     self.assertAlmostEqual(results.total, 0)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#8
0
文件: test_ehp.py 项目: DarkFenX/eos
 def test_uniform(self):
     fit = Fit()
     item = Ship(self.mktype(attrs={
         AttrId.hp: 1,
         AttrId.em_dmg_resonance: 0.8,
         AttrId.therm_dmg_resonance: 0.8,
         AttrId.kin_dmg_resonance: 0.8,
         AttrId.expl_dmg_resonance: 0.8,
         AttrId.armor_hp: 10,
         AttrId.armor_em_dmg_resonance: 0.4,
         AttrId.armor_therm_dmg_resonance: 0.4,
         AttrId.armor_kin_dmg_resonance: 0.4,
         AttrId.armor_expl_dmg_resonance: 0.4,
         AttrId.shield_capacity: 100,
         AttrId.shield_em_dmg_resonance: 0.2,
         AttrId.shield_therm_dmg_resonance: 0.2,
         AttrId.shield_kin_dmg_resonance: 0.2,
         AttrId.shield_expl_dmg_resonance: 0.2}).id)
     fit.ship = item
     # Verification
     results = item.get_ehp(DmgProfile(1, 1, 1, 1))
     self.assertAlmostEqual(results.hull, 1.25)
     self.assertAlmostEqual(results.armor, 25)
     self.assertAlmostEqual(results.shield, 500)
     self.assertAlmostEqual(results.total, 526.25)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#9
0
 def test_generic(self):
     fit = Fit()
     item = Ship(self.mktype(attrs={
         AttrId.em_dmg_resonance: 0.01,
         AttrId.therm_dmg_resonance: 0.02,
         AttrId.kin_dmg_resonance: 0.03,
         AttrId.expl_dmg_resonance: 0.04,
         AttrId.armor_em_dmg_resonance: 0.05,
         AttrId.armor_therm_dmg_resonance: 0.06,
         AttrId.armor_kin_dmg_resonance: 0.07,
         AttrId.armor_expl_dmg_resonance: 0.08,
         AttrId.shield_em_dmg_resonance: 0.09,
         AttrId.shield_therm_dmg_resonance: 0.1,
         AttrId.shield_kin_dmg_resonance: 0.11,
         AttrId.shield_expl_dmg_resonance: 0.12}).id)
     fit.ship = item
     # Verification
     self.assertAlmostEqual(item.resists.hull.em, 0.99)
     self.assertAlmostEqual(item.resists.hull.thermal, 0.98)
     self.assertAlmostEqual(item.resists.hull.kinetic, 0.97)
     self.assertAlmostEqual(item.resists.hull.explosive, 0.96)
     self.assertAlmostEqual(item.resists.armor.em, 0.95)
     self.assertAlmostEqual(item.resists.armor.thermal, 0.94)
     self.assertAlmostEqual(item.resists.armor.kinetic, 0.93)
     self.assertAlmostEqual(item.resists.armor.explosive, 0.92)
     self.assertAlmostEqual(item.resists.shield.em, 0.91)
     self.assertAlmostEqual(item.resists.shield.thermal, 0.9)
     self.assertAlmostEqual(item.resists.shield.kinetic, 0.89)
     self.assertAlmostEqual(item.resists.shield.explosive, 0.88)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#10
0
文件: test_ehp.py 项目: DarkFenX/eos
 def test_item_attr_hp_all_absent(self):
     fit = Fit()
     item = Ship(self.mktype(attrs={
         AttrId.em_dmg_resonance: 0.9,
         AttrId.therm_dmg_resonance: 0.8,
         AttrId.kin_dmg_resonance: 0.7,
         AttrId.expl_dmg_resonance: 0.6,
         AttrId.armor_em_dmg_resonance: 0.4,
         AttrId.armor_therm_dmg_resonance: 0.6,
         AttrId.armor_kin_dmg_resonance: 0.8,
         AttrId.armor_expl_dmg_resonance: 0.9,
         AttrId.shield_em_dmg_resonance: 1.0,
         AttrId.shield_therm_dmg_resonance: 0.8,
         AttrId.shield_kin_dmg_resonance: 0.6,
         AttrId.shield_expl_dmg_resonance: 0.5}).id)
     fit.ship = item
     # Verification
     results = item.get_ehp(DmgProfile(25, 6, 8.333, 1))
     self.assertAlmostEqual(results.hull, 0)
     self.assertAlmostEqual(results.armor, 0)
     self.assertAlmostEqual(results.shield, 0)
     self.assertAlmostEqual(results.total, 0)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#11
0
 def test_item_attr_hp_all_absent(self):
     fit = Fit()
     item = Ship(
         self.mktype(
             attrs={
                 AttrId.em_dmg_resonance: 0.8,
                 AttrId.therm_dmg_resonance: 0.8,
                 AttrId.kin_dmg_resonance: 0.8,
                 AttrId.expl_dmg_resonance: 0.8,
                 AttrId.armor_em_dmg_resonance: 0.4,
                 AttrId.armor_therm_dmg_resonance: 0.4,
                 AttrId.armor_kin_dmg_resonance: 0.4,
                 AttrId.armor_expl_dmg_resonance: 0.4,
                 AttrId.shield_em_dmg_resonance: 0.2,
                 AttrId.shield_therm_dmg_resonance: 0.2,
                 AttrId.shield_kin_dmg_resonance: 0.2,
                 AttrId.shield_expl_dmg_resonance: 0.2
             }).id)
     fit.ship = item
     # Verification
     self.assertAlmostEqual(item.worst_case_ehp.hull, 0)
     self.assertAlmostEqual(item.worst_case_ehp.armor, 0)
     self.assertAlmostEqual(item.worst_case_ehp.shield, 0)
     self.assertAlmostEqual(item.worst_case_ehp.total, 0)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#12
0
 def test_worst_em(self):
     fit = Fit()
     item = Ship(self.mktype(attrs={
         AttrId.hp: 1,
         AttrId.em_dmg_resonance: 0.8,
         AttrId.therm_dmg_resonance: 0.7,
         AttrId.kin_dmg_resonance: 0.7,
         AttrId.expl_dmg_resonance: 0.7,
         AttrId.armor_hp: 10,
         AttrId.armor_em_dmg_resonance: 0.4,
         AttrId.armor_therm_dmg_resonance: 0.3,
         AttrId.armor_kin_dmg_resonance: 0.3,
         AttrId.armor_expl_dmg_resonance: 0.3,
         AttrId.shield_capacity: 100,
         AttrId.shield_em_dmg_resonance: 0.2,
         AttrId.shield_therm_dmg_resonance: 0.1,
         AttrId.shield_kin_dmg_resonance: 0.1,
         AttrId.shield_expl_dmg_resonance: 0.1}).id)
     fit.ship = item
     # Verification
     self.assertAlmostEqual(item.worst_case_ehp.hull, 1.25)
     self.assertAlmostEqual(item.worst_case_ehp.armor, 25)
     self.assertAlmostEqual(item.worst_case_ehp.shield, 500)
     self.assertAlmostEqual(item.worst_case_ehp.total, 526.25)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#13
0
 def test_switch_item(self):
     # Here we create 2 separate fits with ships; each ship affects module
     # with different strength. When we pass module from one fit to another,
     # its internal attribute storage should be cleared. If it wasn't
     # cleared, we wouldn't be able to get refreshed value of attribute
     # Setup
     src_attr_id = self.allocate_attr_id('src1', 'src2')
     self.mkattr(src='src1', attr_id=src_attr_id)
     self.mkattr(src='src2', attr_id=src_attr_id)
     tgt_attr_id = self.allocate_attr_id('src1', 'src2')
     self.mkattr(src='src1', attr_id=tgt_attr_id)
     self.mkattr(src='src2', attr_id=tgt_attr_id)
     modifier = self.mkmod(
         affectee_filter=ModAffecteeFilter.domain,
         affectee_domain=ModDomain.ship,
         affectee_attr_id=tgt_attr_id,
         operator=ModOperator.post_percent,
         affector_attr_id=src_attr_id)
     effect_id = self.allocate_effect_id('src1', 'src2')
     effect_src1 = self.mkeffect(
         src='src1',
         effect_id=effect_id,
         category_id=EffectCategoryId.passive,
         modifiers=[modifier])
     effect_src2 = self.mkeffect(
         src='src2',
         effect_id=effect_id,
         category_id=EffectCategoryId.passive,
         modifiers=[modifier])
     ship_type_id = self.allocate_type_id('src1', 'src2')
     ship1 = Ship(self.mktype(
         src='src1',
         type_id=ship_type_id,
         attrs={src_attr_id: 10},
         effects=[effect_src1]).id)
     ship2 = Ship(self.mktype(
         src='src2',
         type_id=ship_type_id,
         attrs={src_attr_id: 20},
         effects=[effect_src2]).id)
     item_type_id = self.allocate_type_id('src1', 'src2')
     self.mktype(src='src1', type_id=item_type_id, attrs={tgt_attr_id: 50})
     self.mktype(src='src2', type_id=item_type_id, attrs={tgt_attr_id: 50})
     item = Rig(item_type_id)
     fit1 = Fit(SolarSystem('src1'))
     fit1.ship = ship1
     fit2 = Fit(SolarSystem('src2'))
     fit2.ship = ship2
     fit1.rigs.add(item)
     self.assertAlmostEqual(item.attrs.get(tgt_attr_id), 55)
     # Action
     fit1.rigs.remove(item)
     fit2.rigs.add(item)
     # Verification
     self.assertAlmostEqual(item.attrs.get(tgt_attr_id), 60)
     # Cleanup
     self.assert_solsys_buffers_empty(fit1.solar_system)
     self.assert_solsys_buffers_empty(fit2.solar_system)
     self.assert_log_entries(0)
示例#14
0
 def test_switch_fit(self):
     # Here we check if attributes are updated if fit gets new source
     # instance
     # Setup
     src_attr_id = self.allocate_attr_id('src1', 'src2')
     self.mkattr(src='src1', attr_id=src_attr_id)
     self.mkattr(src='src2', attr_id=src_attr_id)
     tgt_attr_id = self.allocate_attr_id('src1', 'src2')
     max_attr_id = self.allocate_attr_id('src1', 'src2')
     self.mkattr(src='src1', attr_id=tgt_attr_id, max_attr_id=max_attr_id)
     self.mkattr(src='src2', attr_id=tgt_attr_id, max_attr_id=max_attr_id)
     self.mkattr(src='src1', attr_id=max_attr_id, default_value=54.5)
     self.mkattr(src='src2', attr_id=max_attr_id, default_value=88)
     modifier = self.mkmod(
         affectee_filter=ModAffecteeFilter.domain,
         affectee_domain=ModDomain.ship,
         affectee_attr_id=tgt_attr_id,
         operator=ModOperator.post_percent,
         affector_attr_id=src_attr_id)
     effect_id = self.allocate_effect_id('src1', 'src2')
     effect_src1 = self.mkeffect(
         src='src1',
         effect_id=effect_id,
         category_id=EffectCategoryId.passive,
         modifiers=[modifier])
     effect_src2 = self.mkeffect(
         src='src2',
         effect_id=effect_id,
         category_id=EffectCategoryId.passive,
         modifiers=[modifier])
     ship_type_id = self.allocate_type_id('src1', 'src2')
     self.mktype(
         src='src1',
         type_id=ship_type_id,
         attrs={src_attr_id: 10},
         effects=[effect_src1])
     self.mktype(
         src='src2',
         type_id=ship_type_id,
         attrs={src_attr_id: 20},
         effects=[effect_src2])
     item_type_id = self.allocate_type_id('src1', 'src2')
     self.mktype(src='src1', type_id=item_type_id, attrs={tgt_attr_id: 50})
     self.mktype(src='src2', type_id=item_type_id, attrs={tgt_attr_id: 75})
     fit = Fit()
     ship = Ship(ship_type_id)
     item = Rig(item_type_id)
     fit.ship = ship
     fit.rigs.add(item)
     # 50 * 1.1, but capped at 54.5
     self.assertAlmostEqual(item.attrs.get(tgt_attr_id), 54.5)
     # Action
     fit.solar_system.source = 'src2'
     # Verification
     # 75 * 1.2, but capped at 88
     self.assertAlmostEqual(item.attrs.get(tgt_attr_id), 88)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#15
0
文件: test_ship.py 项目: pyfa-org/eos
 def test_none_to_none(self):
     fit = Fit()
     # Action
     fit.ship = None
     # Verification
     self.assertIsNone(fit.ship)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#16
0
文件: test_ship.py 项目: DarkFenX/eos
 def test_none_to_none(self):
     fit = Fit()
     # Action
     fit.ship = None
     # Verification
     self.assertIsNone(fit.ship)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#17
0
文件: test_ship.py 项目: pyfa-org/eos
 def test_none_to_item(self):
     fit = Fit()
     item = Ship(self.mktype().id)
     # Action
     fit.ship = item
     # Verification
     self.assertIs(fit.ship, item)
     # Cleanup
     self.assert_item_buffers_empty(item)
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#18
0
 def test_switch_fit(self):
     # Here we check if attributes are updated if fit gets new source
     # instance
     # Setup
     src_attr_id = self.allocate_attr_id('src1', 'src2')
     self.mkattr(src='src1', attr_id=src_attr_id)
     self.mkattr(src='src2', attr_id=src_attr_id)
     tgt_attr_id = self.allocate_attr_id('src1', 'src2')
     max_attr_id = self.allocate_attr_id('src1', 'src2')
     self.mkattr(src='src1', attr_id=tgt_attr_id, max_attr_id=max_attr_id)
     self.mkattr(src='src2', attr_id=tgt_attr_id, max_attr_id=max_attr_id)
     self.mkattr(src='src1', attr_id=max_attr_id, default_value=54.5)
     self.mkattr(src='src2', attr_id=max_attr_id, default_value=88)
     modifier = self.mkmod(affectee_filter=ModAffecteeFilter.domain,
                           affectee_domain=ModDomain.ship,
                           affectee_attr_id=tgt_attr_id,
                           operator=ModOperator.post_percent,
                           affector_attr_id=src_attr_id)
     effect_id = self.allocate_effect_id('src1', 'src2')
     effect_src1 = self.mkeffect(src='src1',
                                 effect_id=effect_id,
                                 category_id=EffectCategoryId.passive,
                                 modifiers=[modifier])
     effect_src2 = self.mkeffect(src='src2',
                                 effect_id=effect_id,
                                 category_id=EffectCategoryId.passive,
                                 modifiers=[modifier])
     ship_type_id = self.allocate_type_id('src1', 'src2')
     self.mktype(src='src1',
                 type_id=ship_type_id,
                 attrs={src_attr_id: 10},
                 effects=[effect_src1])
     self.mktype(src='src2',
                 type_id=ship_type_id,
                 attrs={src_attr_id: 20},
                 effects=[effect_src2])
     item_type_id = self.allocate_type_id('src1', 'src2')
     self.mktype(src='src1', type_id=item_type_id, attrs={tgt_attr_id: 50})
     self.mktype(src='src2', type_id=item_type_id, attrs={tgt_attr_id: 75})
     fit = Fit()
     ship = Ship(ship_type_id)
     item = Rig(item_type_id)
     fit.ship = ship
     fit.rigs.add(item)
     # 50 * 1.1, but capped at 54.5
     self.assertAlmostEqual(item.attrs.get(tgt_attr_id), 54.5)
     # Action
     fit.solar_system.source = 'src2'
     # Verification
     # 75 * 1.2, but capped at 88
     self.assertAlmostEqual(item.attrs.get(tgt_attr_id), 88)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#19
0
文件: test_ship.py 项目: DarkFenX/eos
 def test_none_to_item(self):
     fit = Fit()
     item = Ship(self.mktype().id)
     # Action
     fit.ship = item
     # Verification
     self.assertIs(fit.ship, item)
     # Cleanup
     self.assert_item_buffers_empty(item)
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#20
0
文件: test_hp.py 项目: pyfa-org/eos
 def test_item_attr_all_absent(self):
     fit = Fit()
     item = Ship(self.mktype().id)
     fit.ship = item
     # Verification
     self.assertAlmostEqual(item.hp.hull, 0)
     self.assertAlmostEqual(item.hp.armor, 0)
     self.assertAlmostEqual(item.hp.shield, 0)
     self.assertAlmostEqual(item.hp.total, 0)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#21
0
文件: test_hp.py 项目: pyfa-org/eos
 def test_item_not_loaded(self):
     fit = Fit()
     item = Ship(self.allocate_type_id())
     fit.ship = item
     # Verification
     self.assertAlmostEqual(item.hp.hull, 0)
     self.assertAlmostEqual(item.hp.armor, 0)
     self.assertAlmostEqual(item.hp.shield, 0)
     self.assertAlmostEqual(item.hp.total, 0)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#22
0
 def test_item_not_loaded(self):
     fit = Fit()
     item = Ship(self.allocate_type_id())
     fit.ship = item
     # Verification
     self.assertAlmostEqual(item.worst_case_ehp.hull, 0)
     self.assertAlmostEqual(item.worst_case_ehp.armor, 0)
     self.assertAlmostEqual(item.worst_case_ehp.shield, 0)
     self.assertAlmostEqual(item.worst_case_ehp.total, 0)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#23
0
文件: test_hp.py 项目: DarkFenX/eos
 def test_item_attr_all_absent(self):
     fit = Fit()
     item = Ship(self.mktype().id)
     fit.ship = item
     # Verification
     self.assertAlmostEqual(item.hp.hull, 0)
     self.assertAlmostEqual(item.hp.armor, 0)
     self.assertAlmostEqual(item.hp.shield, 0)
     self.assertAlmostEqual(item.hp.total, 0)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#24
0
文件: test_ehp.py 项目: DarkFenX/eos
 def test_item_not_loaded(self):
     fit = Fit()
     item = Ship(self.allocate_type_id())
     fit.ship = item
     # Verification
     results = item.get_ehp(DmgProfile(1, 1, 1, 1))
     self.assertAlmostEqual(results.hull, 0)
     self.assertAlmostEqual(results.armor, 0)
     self.assertAlmostEqual(results.shield, 0)
     self.assertAlmostEqual(results.total, 0)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#25
0
 def test_item_not_loaded(self):
     fit = Fit()
     item = Ship(self.allocate_type_id())
     fit.ship = item
     # Verification
     results = item.get_ehp(DmgProfile(1, 1, 1, 1))
     self.assertAlmostEqual(results.hull, 0)
     self.assertAlmostEqual(results.armor, 0)
     self.assertAlmostEqual(results.shield, 0)
     self.assertAlmostEqual(results.total, 0)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#26
0
文件: test_ship.py 项目: DarkFenX/eos
 def test_none_to_item_type_failure(self):
     fit = Fit()
     item = Stance(self.mktype().id)
     # Action
     with self.assertRaises(TypeError):
         fit.ship = item
     # Verification
     self.assertIsNone(fit.ship)
     # Check that item which failed to be added can be assigned to other
     # field
     fit.stance = item
     # Cleanup
     self.assert_item_buffers_empty(item)
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#27
0
文件: test_ship.py 项目: pyfa-org/eos
 def test_item_to_item(self):
     fit = Fit()
     ship_type = self.mktype()
     item1 = Ship(ship_type.id)
     item2 = Ship(ship_type.id)
     fit.ship = item1
     # Action
     fit.ship = item2
     # Verification
     self.assertIs(fit.ship, item2)
     # Cleanup
     self.assert_item_buffers_empty(item1)
     self.assert_item_buffers_empty(item2)
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#28
0
文件: test_ship.py 项目: pyfa-org/eos
 def test_none_to_item_type_failure(self):
     fit = Fit()
     item = Stance(self.mktype().id)
     # Action
     with self.assertRaises(TypeError):
         fit.ship = item
     # Verification
     self.assertIsNone(fit.ship)
     # Check that item which failed to be added can be assigned to other
     # field
     fit.stance = item
     # Cleanup
     self.assert_item_buffers_empty(item)
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#29
0
文件: test_ship.py 项目: DarkFenX/eos
 def test_item_to_item(self):
     fit = Fit()
     ship_type = self.mktype()
     item1 = Ship(ship_type.id)
     item2 = Ship(ship_type.id)
     fit.ship = item1
     # Action
     fit.ship = item2
     # Verification
     self.assertIs(fit.ship, item2)
     # Cleanup
     self.assert_item_buffers_empty(item1)
     self.assert_item_buffers_empty(item2)
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#30
0
文件: test_hp.py 项目: DarkFenX/eos
 def test_generic(self):
     fit = Fit()
     item = Ship(self.mktype(attrs={
         AttrId.hp: 8,
         AttrId.armor_hp: 10,
         AttrId.shield_capacity: 12}).id)
     fit.ship = item
     # Verification
     self.assertAlmostEqual(item.hp.hull, 8)
     self.assertAlmostEqual(item.hp.armor, 10)
     self.assertAlmostEqual(item.hp.shield, 12)
     self.assertAlmostEqual(item.hp.total, 30)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#31
0
文件: test_ship.py 项目: DarkFenX/eos
 def test_item_to_item_type_failure(self):
     fit = Fit()
     item1 = Ship(self.mktype().id)
     item2 = Stance(self.mktype().id)
     fit.ship = item1
     # Action
     with self.assertRaises(TypeError):
         fit.ship = item2
     # Verification
     self.assertIs(fit.ship, item1)
     fit.stance = item2
     # Cleanup
     self.assert_item_buffers_empty(item1)
     self.assert_item_buffers_empty(item2)
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#32
0
 def test_fit_none_to_non_charge(self):
     fit = Fit()
     module = ModuleHigh(self.mktype().id, state=State.active, charge=None)
     non_charge = Stance(self.mktype().id)
     fit.modules.high.append(module)
     # Action
     with self.assertRaises(TypeError):
         module.charge = non_charge
     # Verification
     self.assertIsNone(module.charge)
     fit.stance = non_charge
     # Cleanup
     self.assert_item_buffers_empty(module)
     self.assert_item_buffers_empty(non_charge)
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#33
0
文件: test_ship.py 项目: DarkFenX/eos
 def test_none_to_item_value_failure(self):
     fit = Fit()
     fit_other = Fit()
     item = Ship(self.mktype().id)
     fit_other.ship = item
     # Action
     with self.assertRaises(ValueError):
         fit.ship = item
     # Verification
     self.assertIsNone(fit.ship)
     self.assertIs(fit_other.ship, item)
     # Cleanup
     self.assert_item_buffers_empty(item)
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_solsys_buffers_empty(fit_other.solar_system)
     self.assert_log_entries(0)
示例#34
0
 def test_charge_attr_em_absent(self):
     fit = Fit()
     item = ModuleHigh(
         self.mktype(
             attrs={
                 AttrId.dmg_mult: 2.5,
                 AttrId.capacity: 2.0,
                 self.cycle_attr.id: 500,
                 AttrId.charge_rate: 1.0,
                 AttrId.reload_time: 5000},
             effects=[self.effect],
             default_effect=self.effect).id,
         state=State.active)
     item.charge = Charge(self.mktype(attrs={
         AttrId.volume: 0.2,
         AttrId.therm_dmg: 6.3,
         AttrId.kin_dmg: 7.4,
         AttrId.expl_dmg: 8.5}).id)
     fit.modules.high.append(item)
     # Verification
     volley = item.get_volley()
     self.assertAlmostEqual(volley.em, 0)
     self.assertAlmostEqual(volley.thermal, 15.75)
     self.assertAlmostEqual(volley.kinetic, 18.5)
     self.assertAlmostEqual(volley.explosive, 21.25)
     self.assertAlmostEqual(volley.total, 55.5)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#35
0
 def test_contains(self):
     fit = Fit()
     item1 = ModuleHigh(self.mktype().id)
     item2 = ModuleHigh(self.mktype().id)
     self.assertFalse(item1 in fit.modules.high)
     self.assertFalse(None in fit.modules.high)
     self.assertFalse(item2 in fit.modules.high)
     fit.modules.high.append(item1)
     self.assertTrue(item1 in fit.modules.high)
     self.assertFalse(None in fit.modules.high)
     self.assertFalse(item2 in fit.modules.high)
     fit.modules.high.place(3, item2)
     self.assertTrue(item1 in fit.modules.high)
     self.assertTrue(None in fit.modules.high)
     self.assertTrue(item2 in fit.modules.high)
     fit.modules.high.remove(item1)
     self.assertFalse(item1 in fit.modules.high)
     self.assertTrue(None in fit.modules.high)
     self.assertTrue(item2 in fit.modules.high)
     fit.modules.high.remove(item2)
     self.assertFalse(item1 in fit.modules.high)
     self.assertFalse(None in fit.modules.high)
     self.assertFalse(item2 in fit.modules.high)
     # Cleanup
     self.assert_item_buffers_empty(item1)
     self.assert_item_buffers_empty(item2)
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#36
0
 def test_enabling(self):
     # Setup
     chance_attr = self.mkattr()
     src_attr = self.mkattr()
     tgt_attr = self.mkattr()
     modifier = self.mkmod(affectee_filter=ModAffecteeFilter.item,
                           affectee_domain=ModDomain.self,
                           affectee_attr_id=tgt_attr.id,
                           operator=ModOperator.post_mul,
                           affector_attr_id=src_attr.id)
     effect = self.mkeffect(category_id=EffectCategoryId.passive,
                            fitting_usage_chance_attr_id=chance_attr.id,
                            modifiers=[modifier])
     fit = Fit()
     item = Booster(
         self.mktype(attrs={
             chance_attr.id: 0.5,
             tgt_attr.id: 100,
             src_attr.id: 1.2
         },
                     effects=[effect]).id)
     fit.boosters.add(item)
     self.assertAlmostEqual(item.attrs[tgt_attr.id], 100)
     # Action
     item.set_side_effect_status(effect.id, True)
     # Verification
     self.assertIs(item.side_effects[effect.id].status, True)
     self.assertAlmostEqual(item.attrs[tgt_attr.id], 120)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#37
0
 def test_disabling_not_side_effect(self):
     # Setup
     src_attr = self.mkattr()
     tgt_attr = self.mkattr()
     modifier = self.mkmod(affectee_filter=ModAffecteeFilter.item,
                           affectee_domain=ModDomain.self,
                           affectee_attr_id=tgt_attr.id,
                           operator=ModOperator.post_mul,
                           affector_attr_id=src_attr.id)
     effect = self.mkeffect(category_id=EffectCategoryId.passive,
                            modifiers=[modifier])
     fit = Fit()
     item = Booster(
         self.mktype(attrs={
             tgt_attr.id: 100,
             src_attr.id: 1.2
         },
                     effects=[effect]).id)
     fit.boosters.add(item)
     self.assertAlmostEqual(item.attrs[tgt_attr.id], 120)
     # Verification
     with self.assertRaises(NoSuchSideEffectError):
         item.set_side_effect_status(effect.id, False)
     self.assertNotIn(effect.id, item.side_effects)
     self.assertAlmostEqual(item.attrs[tgt_attr.id], 120)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#38
0
文件: test_free.py 项目: pyfa-org/eos
 def test_none(self):
     fit = Fit()
     item1 = ModuleHigh(self.mktype().id)
     item2 = ModuleHigh(self.mktype().id)
     fit.modules.high.append(item1)
     fit.modules.high.append(item2)
     # Action
     with self.assertRaises(ValueError):
         fit.modules.high.free(None)
     # Verification
     self.assertIs(len(fit.modules.high), 2)
     self.assertIs(fit.modules.high[0], item1)
     self.assertIs(fit.modules.high[1], item2)
     # Cleanup
     fit.modules.high.free(item1)
     # Action
     fit.modules.high.free(None)
     # Verification
     self.assertIs(len(fit.modules.high), 2)
     self.assertIsNone(fit.modules.high[0])
     self.assertIs(fit.modules.high[1], item2)
     # Cleanup
     self.assert_item_buffers_empty(item1)
     self.assert_item_buffers_empty(item2)
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#39
0
 def test_effect_disabled(self):
     fit = Fit()
     item = Drone(self.mktype(attrs={
         AttrId.dmg_mult: 2.5,
         AttrId.em_dmg: 52,
         AttrId.therm_dmg: 63,
         AttrId.kin_dmg: 74,
         AttrId.expl_dmg: 85,
         self.cycle_attr.id: 4000
     },
                              effects=[self.effect],
                              default_effect=self.effect).id,
                  state=State.active)
     item.set_effect_mode(self.effect.id, EffectMode.force_stop)
     fit.drones.add(item)
     # Verification
     volley = item.get_volley()
     self.assertAlmostEqual(volley.em, 0)
     self.assertAlmostEqual(volley.thermal, 0)
     self.assertAlmostEqual(volley.kinetic, 0)
     self.assertAlmostEqual(volley.explosive, 0)
     self.assertAlmostEqual(volley.total, 0)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#40
0
 def test_charge_attr_em_absent(self):
     fit = Fit()
     item = ModuleHigh(self.mktype(attrs={
         AttrId.capacity: 60.0,
         self.cycle_attr.id: 5000,
         AttrId.charge_rate: 1.0,
         AttrId.reload_time: 10000,
         AttrId.module_reactivation_delay: 120000
     },
                                   effects=[self.effect_item],
                                   default_effect=self.effect_item).id,
                       state=State.active)
     item.charge = Charge(
         self.mktype(attrs={
             AttrId.volume: 30.0,
             AttrId.therm_dmg: 6300,
             AttrId.kin_dmg: 7400,
             AttrId.expl_dmg: 8500
         },
                     effects=[self.effect_charge],
                     default_effect=self.effect_charge).id)
     fit.modules.high.append(item)
     # Verification
     volley = item.get_volley()
     self.assertAlmostEqual(volley.em, 0)
     self.assertAlmostEqual(volley.thermal, 6300)
     self.assertAlmostEqual(volley.kinetic, 7400)
     self.assertAlmostEqual(volley.explosive, 8500)
     self.assertAlmostEqual(volley.total, 22200)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#41
0
文件: test_dps.py 项目: pyfa-org/eos
 def test_reload(self):
     fit = Fit()
     bomb_type = self.make_charge_type({
         AttrId.em_dmg: 52,
         AttrId.therm_dmg: 63,
         AttrId.kin_dmg: 74,
         AttrId.expl_dmg: 85
     })
     item = self.make_item({
         AttrId.fighter_ability_launch_bomb_type:
         bomb_type.id,
         AttrId.fighter_squadron_max_size:
         9,
         self.cycle_attr.id:
         60000
     })
     fit.fighters.add(item)
     # Verification
     dps = item.get_dps(reload=True)
     self.assertAlmostEqual(dps.em, 7.8)
     self.assertAlmostEqual(dps.thermal, 9.45)
     self.assertAlmostEqual(dps.kinetic, 11.1)
     self.assertAlmostEqual(dps.explosive, 12.75)
     self.assertAlmostEqual(dps.total, 41.1)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#42
0
 def test_charge_not_loaded(self):
     fit = Fit()
     item = ModuleHigh(
         self.mktype(
             attrs={
                 AttrId.dmg_mult: 2.5,
                 AttrId.capacity: 2.0,
                 self.cycle_attr.id: 500,
                 AttrId.charge_rate: 1.0,
                 AttrId.reload_time: 5000},
             effects=[self.effect],
             default_effect=self.effect).id,
         state=State.active)
     item.charge = Charge(self.allocate_type_id())
     fit.modules.high.append(item)
     # Verification
     volley = item.get_volley()
     self.assertAlmostEqual(volley.em, 0)
     self.assertAlmostEqual(volley.thermal, 0)
     self.assertAlmostEqual(volley.kinetic, 0)
     self.assertAlmostEqual(volley.explosive, 0)
     self.assertAlmostEqual(volley.total, 0)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#43
0
文件: test_dps.py 项目: pyfa-org/eos
 def test_reload(self):
     fit = Fit()
     item = ModuleHigh(
         self.mktype(
             attrs={
                 AttrId.capacity: 2.0,
                 self.cycle_attr.id: 2000,
                 AttrId.charge_rate: 1.0,
                 AttrId.reload_time: 10000},
             effects=[self.effect_item],
             default_effect=self.effect_item).id,
         state=State.active)
     item.charge = Charge(self.mktype(
         attrs={
             AttrId.volume: 0.1,
             AttrId.em_dmg: 5.2,
             AttrId.therm_dmg: 6.3,
             AttrId.kin_dmg: 7.4,
             AttrId.expl_dmg: 8.5},
         effects=[self.effect_charge],
         default_effect=self.effect_charge).id)
     fit.modules.high.append(item)
     # Verification
     dps = item.get_dps(reload=True)
     self.assertAlmostEqual(dps.em, 2.08)
     self.assertAlmostEqual(dps.thermal, 2.52)
     self.assertAlmostEqual(dps.kinetic, 2.96)
     self.assertAlmostEqual(dps.explosive, 3.4)
     self.assertAlmostEqual(dps.total, 10.96)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#44
0
 def test_reactivation_shorter_than_reload(self):
     fit = Fit()
     item = ModuleHigh(self.mktype(attrs={
         AttrId.dmg_mult: 2.5,
         AttrId.capacity: 2.0,
         self.cycle_attr.id: 500,
         AttrId.charge_rate: 1.0,
         AttrId.reload_time: 6500,
         AttrId.module_reactivation_delay: 1500
     },
                                   effects=[self.effect],
                                   default_effect=self.effect).id,
                       state=State.active)
     item.charge = Charge(
         self.mktype(
             attrs={
                 AttrId.volume: 0.2,
                 AttrId.em_dmg: 5.2,
                 AttrId.therm_dmg: 6.3,
                 AttrId.kin_dmg: 7.4,
                 AttrId.expl_dmg: 8.5
             }).id)
     fit.modules.high.append(item)
     # Verification
     dps = item.get_dps(reload=True)
     self.assertAlmostEqual(dps.em, 5.2)
     self.assertAlmostEqual(dps.thermal, 6.3)
     self.assertAlmostEqual(dps.kinetic, 7.4)
     self.assertAlmostEqual(dps.explosive, 8.5)
     self.assertAlmostEqual(dps.total, 27.4)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#45
0
 def test_effective(self):
     fit = Fit()
     item = ModuleHigh(self.mktype(attrs={
         AttrId.dmg_mult: 2.5,
         AttrId.capacity: 2.0,
         self.cycle_attr.id: 500,
         AttrId.charge_rate: 1.0,
         AttrId.reload_time: 5000
     },
                                   effects=[self.effect],
                                   default_effect=self.effect).id,
                       state=State.active)
     item.charge = Charge(
         self.mktype(
             attrs={
                 AttrId.volume: 0.2,
                 AttrId.em_dmg: 5.2,
                 AttrId.therm_dmg: 6.3,
                 AttrId.kin_dmg: 7.4,
                 AttrId.expl_dmg: 8.5
             }).id)
     fit.modules.high.append(item)
     # Verification
     profile = ResistProfile(0.2, 0.2, 0.8, 1)
     dps = item.get_dps(tgt_resists=profile)
     self.assertAlmostEqual(dps.em, 20.8)
     self.assertAlmostEqual(dps.thermal, 25.2)
     self.assertAlmostEqual(dps.kinetic, 7.4)
     self.assertAlmostEqual(dps.explosive, 0)
     self.assertAlmostEqual(dps.total, 53.4)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#46
0
 def test_slice(self):
     fit = Fit()
     item1 = ModuleHigh(self.mktype().id)
     item2 = ModuleHigh(self.mktype().id)
     fit.modules.high.append(item1)
     fit.modules.high.place(3, item2)
     slice_full = fit.modules.high[:]
     self.assertEqual(len(slice_full), 4)
     self.assertIs(slice_full[0], item1)
     self.assertIsNone(slice_full[1])
     self.assertIsNone(slice_full[2])
     self.assertIs(slice_full[3], item2)
     slice_positive = fit.modules.high[0:2]
     self.assertEqual(len(slice_positive), 2)
     self.assertIs(slice_positive[0], item1)
     self.assertIsNone(slice_positive[1])
     slice_negative = fit.modules.high[-2:]
     self.assertEqual(len(slice_negative), 2)
     self.assertIsNone(slice_negative[0])
     self.assertIs(slice_negative[1], item2)
     slice_step = fit.modules.high[::2]
     self.assertEqual(len(slice_step), 2)
     self.assertIs(slice_step[0], item1)
     self.assertIsNone(slice_step[1])
     # Cleanup
     self.assert_item_buffers_empty(item1)
     self.assert_item_buffers_empty(item2)
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#47
0
文件: test_free.py 项目: pyfa-org/eos
 def test_item_after_nones(self):
     fit = Fit()
     item1 = ModuleHigh(self.mktype().id)
     item2 = ModuleHigh(self.mktype().id)
     item3 = ModuleHigh(self.mktype().id)
     fit.modules.high.append(item1)
     fit.modules.high.place(3, item2)
     fit.modules.high.place(6, item3)
     # Action
     fit.modules.high.free(item2)
     # Verification
     self.assertEqual(len(fit.modules.high), 7)
     self.assertIs(fit.modules.high[0], item1)
     self.assertIsNone(fit.modules.high[1])
     self.assertIsNone(fit.modules.high[2])
     self.assertIsNone(fit.modules.high[3])
     self.assertIsNone(fit.modules.high[4])
     self.assertIsNone(fit.modules.high[5])
     self.assertIs(fit.modules.high[6], item3)
     # Action
     fit.modules.high.free(item3)
     # Verification
     self.assertEqual(len(fit.modules.high), 1)
     self.assertIs(fit.modules.high[0], item1)
     # Cleanup
     self.assert_item_buffers_empty(item1)
     self.assert_item_buffers_empty(item2)
     self.assert_item_buffers_empty(item3)
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#48
0
 def test_detached_module_charge_to_non_charge(self):
     fit_other = Fit()
     module = ModuleHigh(self.mktype().id, state=State.active, charge=None)
     charge = Charge(self.mktype().id)
     non_charge = Stance(self.mktype().id)
     module.charge = charge
     # Action
     with self.assertRaises(TypeError):
         module.charge = non_charge
     # Verification
     self.assertIs(module.charge, charge)
     fit_other.stance = non_charge
     # Cleanup
     self.assert_item_buffers_empty(module)
     self.assert_item_buffers_empty(charge)
     self.assert_item_buffers_empty(non_charge)
     self.assert_solsys_buffers_empty(fit_other.solar_system)
     self.assert_log_entries(0)
示例#49
0
 def __generic_init(self):
     char_type_id = Type.character_static
     EveItemWrapper.__init__(self, char_type_id)
     # Attributes which store objects hidden behind properties
     self.__source = None
     # Set with fits which are loaded and use this character
     self.__loaded_proxies = WeakSet()
     self.skills = SkillCoreSet(self)
     self._eos_fit = EosFit()
示例#50
0
文件: test_ship.py 项目: DarkFenX/eos
 def test_item_to_item_value_failure(self):
     fit = Fit()
     fit_other = Fit()
     ship_type = self.mktype()
     item1 = Ship(ship_type.id)
     item2 = Ship(ship_type.id)
     fit.ship = item1
     fit_other.ship = item2
     # Action
     with self.assertRaises(ValueError):
         fit.ship = item2
     # Verification
     self.assertIs(fit.ship, item1)
     self.assertIs(fit_other.ship, item2)
     # Cleanup
     self.assert_item_buffers_empty(item1)
     self.assert_item_buffers_empty(item2)
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_solsys_buffers_empty(fit_other.solar_system)
     self.assert_log_entries(0)
示例#51
0
文件: testcase.py 项目: DarkFenX/eos
class RestrictionTestCase(IntegrationTestCase):
    """Class which should be used by restriction service tests.

    Attributes:
        fit: Pre-created fit.
    """

    def setUp(self):
        IntegrationTestCase.setUp(self)
        self.fit = Fit()

    def get_error(self, item, restriction):
        """Get restriction error for passed item of passed restriction type.

        Args:
            item: Item which should be validated.
            restriction: Restriction type which we're interested in. Errors of
                any other restriction types will be ignored.

        Returns:
            If specified error occurred with specified item, returns error data;
            if it didn't, returns None.
        """
        skip_checks = set(Restriction).difference([restriction])
        try:
            self.fit.validate(skip_checks)
        except ValidationError as e:
            error_data = e.args[0]
            if item not in error_data:
                return None
            item_error = error_data[item]
            if restriction not in item_error:
                return None
            return item_error[restriction]
        else:
            return None

    def get_log(self, name='eos.restriction*'):
        return IntegrationTestCase.get_log(self, name=name)
示例#52
0
 def __generic_init(self):
     # Attributes which store objects hidden behind properties
     self.__source = None
     self.__ship = None
     self.__character_proxy = None
     self.__character_core = None
     # Eos fit will be primary point of using Eos calculation engine for
     # fit-specific data
     self._eos_fit = EosFit()
     # Manages fit-specific data needed for undo/redo
     self._cmd_mgr = CommandManager(100)
     # There's little sense in changing proxy character, thus we assign
     # it here and it stays with fit forever
     self.__set_character_proxy(CharacterProxy())
示例#53
0
 def test_item_attr_hp_all_absent(self):
     fit = Fit()
     item = Ship(self.mktype(attrs={
         AttrId.em_dmg_resonance: 0.8,
         AttrId.therm_dmg_resonance: 0.8,
         AttrId.kin_dmg_resonance: 0.8,
         AttrId.expl_dmg_resonance: 0.8,
         AttrId.armor_em_dmg_resonance: 0.4,
         AttrId.armor_therm_dmg_resonance: 0.4,
         AttrId.armor_kin_dmg_resonance: 0.4,
         AttrId.armor_expl_dmg_resonance: 0.4,
         AttrId.shield_em_dmg_resonance: 0.2,
         AttrId.shield_therm_dmg_resonance: 0.2,
         AttrId.shield_kin_dmg_resonance: 0.2,
         AttrId.shield_expl_dmg_resonance: 0.2}).id)
     fit.ship = item
     # Verification
     self.assertAlmostEqual(item.worst_case_ehp.hull, 0)
     self.assertAlmostEqual(item.worst_case_ehp.armor, 0)
     self.assertAlmostEqual(item.worst_case_ehp.shield, 0)
     self.assertAlmostEqual(item.worst_case_ehp.total, 0)
     # Cleanup
     self.assert_solsys_buffers_empty(fit.solar_system)
     self.assert_log_entries(0)
示例#54
0
class Character(PyfaBase, EveItemWrapper):
    """
    "Core" character class. It should be used for managing characters
    (e.g. in character editor). Fits will use proxy twin of the character.
    We cannot use core because different fits carry different attributes
    on character and all child entities (like skills, on-character
    implants, and so on).

    Pyfa model children:
    .RestrictedSet(skills)
    """

    __tablename__ = 'characters'

    id = Column('character_id', Integer, primary_key=True)
    alias = Column(String)

    def __init__(self, alias='', source=None):
        self.__generic_init()
        # Use default source, unless specified otherwise
        if source is None:
            source = SourceManager.default
        self.source = source
        self.alias = alias

    @reconstructor
    def _dbinit(self):
        self.__generic_init()
        # Use default source for all reconstructed characters
        self.source = SourceManager.default
        # Restore entities which are stored on character
        for skill in self._skills:
            self.skill.add(skill)

    def __generic_init(self):
        char_type_id = Type.character_static
        EveItemWrapper.__init__(self, char_type_id)
        # Attributes which store objects hidden behind properties
        self.__source = None
        # Set with fits which are loaded and use this character
        self.__loaded_proxies = WeakSet()
        self.skills = SkillCoreSet(self)
        self._eos_fit = EosFit()

    # EVE item wrapper methods
    @property
    def _source(self):
        return self.source

    @property
    def _eos_item(self):
        return self._eos_fit.character

    @property
    def _src_children(self):
        return get_src_children(chain(
            self.skills,
        ))

    # Miscellanea public stuff
    @property
    def source(self):
        return self.__source

    @source.setter
    def source(self, new_source):
        # Attempt to fetch source from source manager if passed object
        # is not instance of source class
        if not isinstance(new_source, Source) and new_source is not None:
            new_source = SourceManager.get(new_source)
        old_source = self.source
        # Do not update anything if sources are the same
        if new_source is old_source:
            return
        self.__source = new_source
        # Update eos model with new data
        self._eos_fit.source = getattr(new_source, 'eos', None)
        # Update pyfa model with new data
        # Unlike fit, character represents EVE item, thus we need
        # to update it too
        self._update_source()
        for src_child in self._src_children:
            src_child._update_source()

    persist = pyfa_persist
    abandon = pyfa_abandon

    def validate(self):
        self._eos_fit.validate()

    # Auxiliary methods
    def _proxy_iter(self):
        """
        Safe iterator over related character proxies, avoids issues
        with set size getting changed by GC during iteration.
        """
        for char_proxy in tuple(self.__loaded_proxies):
            yield char_proxy

    def _link_proxy(self, char_proxy):
        """Create connection between character core and proxy"""
        self.__loaded_proxies.add(char_proxy)

    def _unlink_proxy(self, char_proxy):
        """Remove connection between character core and proxy"""
        self.__loaded_proxies.discard(char_proxy)

    def __repr__(self):
        spec = ['id']
        return make_repr_str(self, spec)
示例#55
0
class Fit(PyfaBase):
    """
    Full pyfa model of fit:
    .fit
      .character_core (read-write fit-agnostic)
        .RestrictedSet(skills)
      .character_proxy (read-only fit-specific)
        .RestrictedSet(skills)
      .ship
        .stance
        .{subsystems}
        .modules.[high]/[med]/[low]
    """

    __tablename__ = 'fits'

    id = Column('fit_id', Integer, primary_key=True)
    name = Column('fit_name', String, nullable=False)
    _db_ship_type_id = Column('ship_type_id', Integer)
    _db_stance_type_id = Column('stance_type_id', Integer)

    _db_character_id = Column('character_id', Integer, ForeignKey('characters.character_id'))
    _db_character = relationship('Character')

    def __init__(self, name='', source=None, ship=None):
        self.__generic_init()
        # Use default source, unless specified otherwise
        if source is None:
            source = SourceManager.default
        self._set_source(source)
        self._set_ship(ship)
        self.name = name

    @reconstructor
    def _dbinit(self):
        self.__generic_init()
        # Use default source for all reconstructed fits
        self._set_source(SourceManager.default)
        # Restore entities which are stored on fit in DB
        if self._db_ship_type_id is not None:
            self._set_ship(Ship(self._db_ship_type_id))
            if self._db_stance_type_id is not None:
                self.ship._set_stance(Stance(self._db_stance_type_id))
            # TODO: find appropriate way to reconstruct modules
            for module in self._db_modules:
                pass
            for subsystem in self._db_subsystems:
                self.ship.subsystems._add_to_set(subsystem)
        self.character_core = self._db_character

    def __generic_init(self):
        # Attributes which store objects hidden behind properties
        self.__source = None
        self.__ship = None
        self.__character_proxy = None
        self.__character_core = None
        # Eos fit will be primary point of using Eos calculation engine for
        # fit-specific data
        self._eos_fit = EosFit()
        # Manages fit-specific data needed for undo/redo
        self._cmd_mgr = CommandManager(100)
        # There's little sense in changing proxy character, thus we assign
        # it here and it stays with fit forever
        self.__set_character_proxy(CharacterProxy())

    # Define list of source-dependent child objects, it's necessary
    # to update fit source
    @property
    def _src_children(self):
        return get_src_children(chain(
            (self.ship,),
            # Just proxy, character core is completely separate entity with
            # its own source management
            (self.character_proxy,),
        ))

    # Read-only info
    @property
    def stats(self):
        return self._eos_fit.stats

    # Children getters/setters
    @property
    def character_core(self):
        return self.__character_core

    @character_core.setter
    def character_core(self, new_char_core):
        old_char_core = self.__character_core
        if new_char_core is old_char_core:
            return
        # Update child reference
        self.__character_core = new_char_core
        # Update DB
        self._db_character = new_char_core
        # Handle all interactions between new character core and
        # character proxy (which is attached to this fit) on proxy
        # side
        self.character_proxy._parent_char_core = new_char_core

    @property
    def character_proxy(self):
        """
        For character proxy we're not providing setter because it's
        supposed to stay with fit all the time.
        """
        return self.__character_proxy

    def __set_character_proxy(self, new_char_proxy):
        old_char_proxy = self.__character_proxy
        if new_char_proxy is old_char_proxy:
            return
        if old_char_proxy is not None:
            if old_char_proxy._parent_fit is not self:
                raise ItemRemovalConsistencyError(old_char_proxy)
            # Handle all character proxy children removal on proxy itself
            old_char_proxy._parent_fit = None
        # Update child reference
        self.__character_proxy = new_char_proxy
        if new_char_proxy is not None:
            if new_char_proxy._parent_fit is not None:
                raise ItemAlreadyUsedError(new_char_proxy)
            # Handle all character proxy children addition on proxy itself
            new_char_proxy._parent_fit = self

    @property
    def ship(self):
        return self.__ship

    @ship.setter
    def ship(self, new_ship):
        command = ShipChangeCommand(self, new_ship)
        self._cmd_mgr.do(command)

    def _set_ship(self, new_ship):
        old_ship = self.__ship
        if new_ship is old_ship:
            return
        if old_ship is not None:
            if old_ship._parent_fit is not self:
                raise ItemRemovalConsistencyError(old_ship)
            old_ship._parent_fit = None
        self.__ship = new_ship
        if new_ship is not None:
            if new_ship._parent_fit is not None:
                raise ItemAlreadyUsedError(new_ship)
            new_ship._parent_fit = self

    # Undo/redo proxies
    @property
    def has_undo(self):
        return self._cmd_mgr.has_undo

    @property
    def has_redo(self):
        return self._cmd_mgr.has_redo

    def undo(self):
        self._cmd_mgr.undo()

    def redo(self):
        self._cmd_mgr.redo()

    def purge_commands(self):
        """
        Purge all undos/redos fit currently has. Useful when you want to
        do some initial setup on the fit, and then purge commands to present
        fit without undo queue.
        """
        self._cmd_mgr.purge()

    # Miscellanea public stuff
    @property
    def source(self):
        return self.__source

    @source.setter
    def source(self, new_source):
        command = SourceChangeCommand(self, new_source)
        self._cmd_mgr.do(command)

    def _set_source(self, new_source):
        """
        Set fit's source. Source represents EVE data to be used.

        Required arguments:
        new_source -- source to use, can be None
        """
        # Attempt to fetch source from source manager if passed object
        # is not instance of source class
        if not isinstance(new_source, Source) and new_source is not None:
            new_source = SourceManager.get(new_source)
        old_source = self.source
        # Do not update anything if sources are the same
        if new_source is old_source:
            return
        self.__source = new_source
        # Update eos model with new data
        self._eos_fit.source = getattr(new_source, 'eos', None)
        # Update pyfa model with new data
        for src_child in self._src_children:
            src_child._update_source()

    persist = pyfa_persist
    abandon = pyfa_abandon

    def validate(self):
        self._eos_fit.validate()

    # Auxiliary methods
    def __repr__(self):
        spec = ['id']
        return make_repr_str(self, spec)
示例#56
0
文件: testcase.py 项目: DarkFenX/eos
 def setUp(self):
     IntegrationTestCase.setUp(self)
     self.fit = Fit()