def results(logger, tests, baseline, args, result_stats):
for test in tests:
publish.json_status(logger, args, "rebuilding %s" % test.name)
# If debug logging is enabled this will provide fine grained
# per-test timing.
with logger.debug_time("processing test %s", test.name):
# Filter out tests that are being ignored?
ignored, details = ignore.test(logger, args, test)
if ignored:
result_stats.add_ignored(test, ignored)
continue
# Filter out test results that are being skipped.
#
# XXX: In the default case (skip=[UNTESTED]) this should
# be cheap (does OUTPUT/ exist?). It isn't, instead a
# full post-mortem analysis is performed.
#
# This is noticeable when printing static test value such
# as the test's name takes far longer than one would
# expect.
result = post.mortem(test,
args,
baseline=baseline,
output_directory=test.saved_output_directory,
quick=args.quick)
if args.update:
result.save()
if args.skip:
if skip.result(logger, args, result):
result_stats.add_skipped(result)
continue
result_stats.add_result(result)
publish.test_files(logger, args, result)
publish.test_output_files(logger, args, result)
publish.json_result(logger, args, result)
if baseline and post.Issues.CRASHED.isdisjoint(result.issues):
# Since there is a baseline and the test didn't crash
# limit what is printed to just those where the
# baseline's result is different.
#
# Note that, this skips baseline-different - where the
# baseline failed for a different reason.
if {post.Issues.BASELINE_FAILED,
post.Issues.BASELINE_PASSED}.isdisjoint(result.issues):
continue
b = args.json and printer.JsonBuilder(
sys.stdout) or printer.TextBuilder(sys.stdout)
printer.build_result(logger, result, baseline, args, args.print, b)
publish.json_status(logger, args, "finished")
def results(logger, tests, baseline, args, result_stats):
for test in tests:
publish.json_status(logger, args, "rebuilding %s" % test.name)
# If debug logging is enabled this will provide fine grained
# per-test timing.
with logger.debug_time("processing test %s", test.name):
# Filter out tests that are being ignored?
ignored, details = ignore.test(logger, args, test)
if ignored:
result_stats.add_ignored(test, ignored)
continue
# Filter out test results that are being skipped.
#
# XXX: In the default case (skip=[UNTESTED]) this should
# be cheap (does OUTPUT/ exist?). It isn't, instead a
# full post-mortem analysis is performed.
#
# This is noticable when printing static test value such
# as the test's name takes far longer than one would
# expect.
result = post.mortem(test,
args,
baseline=baseline,
output_directory=test.saved_output_directory,
quick=args.quick,
update=args.update)
if args.skip:
if skip.result(logger, args, result):
result_stats.add_skipped(result)
continue
result_stats.add_result(result)
publish.test_files(logger, args, result)
publish.test_output_files(logger, args, result)
publish.json_result(logger, args, result)
# If there is a baseline; limit what is printed to just
# those that differ.
if baseline:
baseline_issue = False
for issue in result.issues:
if "baseline" in issue:
baseline_issue = True
break
if not baseline_issue:
continue
b = args.json and printer.JsonBuilder(
sys.stdout) or printer.TextBuilder(sys.stdout)
printer.build_result(logger, result, baseline, args, args.print, b)
publish.json_status(logger, args, "finished")
def results(logger, tests, baseline, args, result_stats):
for test in tests:
publish.json_status(logger, args, "rebuilding %s" % test.name)
# If debug logging is enabled this will provide fine grained
# per-test timing.
with logger.debug_time("processing test %s", test.name):
# Filter out tests that are being ignored?
ignored, details = ignore.test(logger, args, test)
if ignored:
result_stats.add_ignored(test, ignored)
continue
# Filter out test results that are being skipped.
#
# XXX: In the default case (skip=[UNTESTED]) this should
# be cheap (does OUTPUT/ exist?). It isn't, instead a
# full post-mortem analysis is performed.
#
# This is noticeable when printing static test value such
# as the test's name takes far longer than one would
# expect.
result = post.mortem(test, args,
baseline=baseline,
output_directory=test.saved_output_directory,
quick=args.quick)
if args.update:
result.save()
if args.skip:
if skip.result(logger, args, result):
result_stats.add_skipped(result)
continue
result_stats.add_result(result)
publish.test_files(logger, args, result)
publish.test_output_files(logger, args, result)
publish.json_result(logger, args, result)
if baseline and post.Issues.CRASHED.isdisjoint(result.issues):
# Since there is a baseline and the test didn't crash
# limit what is printed to just those where the
# baseline's result is different.
#
# Note that, this skips baseline-different - where the
# baseline failed for a different reason.
if {post.Issues.BASELINE_FAILED, post.Issues.BASELINE_PASSED}.isdisjoint(result.issues):
continue
b = args.json and printer.JsonBuilder(sys.stdout) or printer.TextBuilder(sys.stdout)
printer.build_result(logger, result, baseline, args, args.print, b)
publish.json_status(logger, args, "finished")
def result(self, reason):
if self.cached_result:
return self.cached_result
self.logger.debug("loading results for %s", reason)
self.cached_result = post.mortem(self.test, self.args,
baseline=self.baseline,
output_directory=self.test.saved_output_directory,
quick=self.args.quick, update=self.args.update,
finished=None)
self.result_stats.add_result(self.cached_result)
return self.cached_result
def result(self, reason):
if self.cached_result:
return self.cached_result
self.logger.debug("loading results for %s", reason)
self.cached_result = post.mortem(
self.test,
self.args,
baseline=self.baseline,
output_directory=self.test.saved_output_directory,
quick=self.args.quick,
update=self.args.update)
self.result_stats.add_result(self.cached_result)
return self.cached_result
def results(logger, tests, baseline, args, result_stats):
for test in tests:
# If debug logging is enabled this will provide fine grained
# per-test timing.
with logger.debug_time("processing test %s", test.name):
# Filter out tests that are being ignored?
ignored, include_ignored, details = ignore.test(logger, args, test)
if ignored:
result_stats.add_ignored(test, ignored)
if not include_ignored:
continue
# Filter out tests that have not been run
result = None
if not ignored and Print.result in args.print:
result = post.mortem(
test,
args,
baseline=baseline,
output_directory=test.saved_output_directory,
test_finished=None,
skip_sanitize=args.quick or args.quick_sanitize,
skip_diff=args.quick or args.quick_diff,
update=args.update,
update_sanitize=args.update_sanitize,
update_diff=args.update_diff)
if skip.result(logger, args, result):
continue
if not result:
result_stats.add_ignored(test, str(result))
else:
result_stats.add_result(result)
sep = ""
# Print the test's name/path
if not args.prefix:
# By default: when the path given on the command line
# explicitly specifies a test's output directory
# (found in TEST.SAVED_OUTPUT_DIRECTORY), print that;
# otherwise print the path to the test's directory.
print(sep, end="")
print((test.saved_output_directory
and test.saved_output_directory or test.directory),
end="")
sep = " "
else:
# Print the test name/path per command line
if args.prefix is Prefix.name:
print(sep, end="")
print(test.name, end="")
sep = " "
elif args.prefix is Prefix.test_directory:
print(sep, end="")
print(test.directory, end="")
sep = " "
elif args.prefix is Prefix.output_directory:
print(sep, end="")
print((test.saved_output_directory
and test.saved_output_directory
or test.output_directory),
end="")
sep = " "
if ignored:
print(sep, end="")
print("ignored", ignored, end="")
sep = " "
for p in args.print:
if p in [Print.diffs]:
continue
elif p is Print.directory:
print(sep, end="")
print(test.directory, end="")
sep = " "
elif p is Print.expected_result:
print(sep, end="")
print(test.expected_result, end="")
sep = " "
elif p is Print.full_name:
print(sep, end="")
print(test.full_name, end="")
sep = " "
elif p is Print.host_names:
for name in test.host_names:
print(sep, end="")
print(name, end="")
sep = ","
sep = " "
elif p is Print.kind:
print(sep, end="")
print(test.kind, end="")
sep = " "
elif p is Print.name:
print(sep, end="")
print(test.name, end="")
sep = " "
elif p is Print.output_directory:
print(sep, end="")
print(test.output_directory, end="")
sep = " "
elif p is Print.result:
if result:
print(sep, end="")
if result.errors:
print(result, result.errors, end="")
else:
print(result, end="")
sep = " "
elif p is Print.sanitize_directory:
print(sep, end="")
print(test.sanitize_directory, end="")
sep = " "
elif p is Print.saved_output_directory:
print(sep, end="")
print(test.saved_output_directory, end="")
sep = " "
elif p is Print.scripts:
for host, script in test.host_script_tuples:
print(sep, end="")
print("%s:%s" % (host, script), end="")
sep = ","
sep = " "
else:
print()
print("unknown print option", p)
print()
if Print.diffs in args.print and result:
for domain in result.diffs:
for line in result.diffs[domain]:
if line:
print(line)
sys.stdout.flush()
def results(logger, tests, baseline, args, result_stats):
for test in tests:
# If debug logging is enabled this will provide fine grained
# per-test timing.
with logger.debug_time("processing test %s", test.name):
# Filter out tests that are being ignored?
ignored, include_ignored, details = ignore.test(logger, args, test)
if ignored:
result_stats.add_ignored(test, ignored)
if not include_ignored:
continue
# Filter out tests that have not been run
result = None
if not ignored and Print.result in args.print:
result = post.mortem(test, args, baseline=baseline,
output_directory=test.saved_output_directory,
test_finished=None,
skip_sanitize=args.quick or args.quick_sanitize,
skip_diff=args.quick or args.quick_diff,
update=args.update,
update_sanitize=args.update_sanitize,
update_diff=args.update_diff)
if skip.result(logger, args, result):
continue
if not result:
result_stats.add_ignored(test, str(result))
else:
result_stats.add_result(result)
sep = ""
# Print the test's name/path
if not args.prefix:
# By default: when the path given on the command line
# explicitly specifies a test's output directory
# (found in TEST.SAVED_OUTPUT_DIRECTORY), print that;
# otherwise print the path to the test's directory.
print(sep, end="")
print((test.saved_output_directory
and test.saved_output_directory
or test.directory), end="")
sep = " "
else:
# Print the test name/path per command line
if args.prefix is Prefix.name:
print(sep, end="")
print(test.name, end="")
sep = " "
elif args.prefix is Prefix.test_directory:
print(sep, end="")
print(test.directory, end="")
sep = " "
elif args.prefix is Prefix.output_directory:
print(sep, end="")
print((test.saved_output_directory
and test.saved_output_directory
or test.output_directory), end="")
sep = " "
if ignored:
print(sep, end="")
print("ignored", ignored, end="")
sep = " "
for p in args.print:
if p in [Print.diffs]:
continue
elif p is Print.directory:
print(sep, end="")
print(test.directory, end="")
sep = " "
elif p is Print.expected_result:
print(sep, end="")
print(test.expected_result, end="")
sep = " "
elif p is Print.full_name:
print(sep, end="")
print(test.full_name, end="")
sep = " "
elif p is Print.host_names:
for name in test.host_names:
print(sep, end="")
print(name, end="")
sep = ","
sep = " "
elif p is Print.kind:
print(sep, end="")
print(test.kind, end="")
sep = " "
elif p is Print.name:
print(sep, end="")
print(test.name, end="")
sep = " "
elif p is Print.output_directory:
print(sep, end="")
print(test.output_directory, end="")
sep = " "
elif p is Print.result:
if result:
print(sep, end="")
if result.errors:
print(result, result.errors, end="")
else:
print(result, end="")
sep = " "
elif p is Print.sanitize_directory:
print(sep, end="")
print(test.sanitize_directory, end="")
sep = " "
elif p is Print.saved_output_directory:
print(sep, end="")
print(test.saved_output_directory, end="")
sep = " "
elif p is Print.scripts:
for host, script in test.host_script_tuples:
print(sep, end="")
print("%s:%s" % (host, script), end="")
sep = ","
sep = " "
else:
print()
print("unknown print option", p)
print()
if Print.diffs in args.print and result:
for domain in result.diffs:
for line in result.diffs[domain]:
if line:
print(line)
sys.stdout.flush()
def _process_test(domain_prefix, test, args, test_stats, result_stats,
test_count, tests_count, boot_executor):
logger = logutil.getLogger(domain_prefix, __name__, test.name)
prefix = "******"
suffix = "******"
test_stats.add(test, "total")
test_runtime = test_boot_time = test_script_time = test_total_time = None
# Would the number of tests to be [re]run be better?
test_prefix = "%s (test %d of %d)" % (test.name, test_count, tests_count)
with logger.time("processing test %s", test_prefix) as test_total_time:
ignored, details = ignore.test(logger, args, test)
if ignored:
result_stats.add_ignored(test, ignored)
test_stats.add(test, "ignored")
logger.info("%s %s ignored (%s) %s", prefix, test_prefix, details,
suffix)
return
# Be lazy when gathering the results, don't run the sanitizer
# or diff. Let post.mortem figure out if the test finished.
old_result = post.mortem(test,
args,
domain_prefix=domain_prefix,
quick=True,
finished=None)
if skip.result(logger, args, old_result):
logger.info("%s %s skipped (previously %s) %s", prefix,
test_prefix, old_result, suffix)
test_stats.add(test, "skipped")
result_stats.add_skipped(old_result)
return
if old_result:
test_stats.add(test, "tests", "retry")
logger.info("%s %s started (previously %s) ....", prefix,
test_prefix, old_result)
else:
test_stats.add(test, "tests", "try")
logger.info("%s %s started ....", prefix, test_prefix)
test_stats.add(test, "tests")
# Create just the OUTPUT/ directory; if it already exists,
# move any contents to BACKUP/. Do it file-by-file so that,
# at no point, the OUTPUT/ directory is missing (having an
# OUTPUT/ directory implies the test was started).
#
# Don't create the path. If the parent directory is missing,
# this will fail.
#
# By backing up each test just before it is started, a trail
# of what tests were attempted during each run is created.
#
# XXX:
#
# During boot, swan-transmogrify runs "chcon -R
# testing/pluto". Of course this means that each time a test
# is added and/or a test is run (adding files under
# <test>/OUTPUT), the boot process (and consequently the time
# taken to run a test) keeps increasing.
#
# By moving the directory contents to BACKUP/, which is not
# under testing/pluto/ this problem is avoided.
try:
os.mkdir(test.output_directory)
except FileNotFoundError:
# Bail, something is messed up (for instance the parent directory doesn't exist).
return
except FileExistsError:
backup_directory = os.path.join(args.backup_directory, test.name)
logger.info("moving contents of '%s' to '%s'",
test.output_directory, backup_directory)
# Even if OUTPUT/ is empty, copy it.
os.makedirs(backup_directory, exist_ok=True)
for name in os.listdir(test.output_directory):
src = os.path.join(test.output_directory, name)
dst = os.path.join(backup_directory, name)
logger.debug("moving '%s' to '%s'", src, dst)
os.replace(src, dst)
# Now that the OUTPUT directory is empty, start a debug log
# writing to that directory; include timing for this test run.
with logger.debug_time("testing %s",
test_prefix,
logfile=os.path.join(test.output_directory,
"debug.log"),
loglevel=logutil.INFO) as test_runtime:
with logger.time("booting domains") as test_boot_time:
try:
test_domains = _boot_test_domains(logger, test,
domain_prefix,
boot_executor)
except pexpect.TIMEOUT:
logger.exception("timeout while booting domains")
# Bail before RESULT is written - being unable to
# boot the domains is a disaster. The test is
# UNRESOLVED.
return
# Run the scripts directly
with logger.time(
"running scripts %s",
" ".join(("%s:%s" % (host, script)) for host, script in
test.host_script_tuples)) as test_script_time:
with tcpdump.Dump(logger,
domain_prefix,
test.output_directory, [
test_domain.domain
for test_domain in test_domains.values()
],
enable=args.tcpdump):
try:
# re-direct the test-result log file
for test_domain in test_domains.values():
output = os.path.join(
test.output_directory,
test_domain.domain.host_name +
".console.verbose.txt")
test_domain.console.output(open(output, "w"))
try:
for host, script in test.host_script_tuples:
if args.stop_at == script:
logger.error(
"stopping test run at (before executing) script %s",
script)
break
test_domain = test_domains[host]
test_domain.read_file_run(script)
except pexpect.TIMEOUT as e:
# A test ending with a timeout is still a
# finished test. Analysis of the results
# will detect this and flag it as a fail.
logger.error(
"**** timeout out while running script %s ****",
script)
finally:
# Close the redirected test-result log files
for test_domain in test_domains.values():
logfile = test_domain.console.output()
logfile.close()
# Always disconnect from the test domains.
logger.info("closing all test domains")
for test_domain in test_domains.values():
logfile = test_domain.console.output()
if logfile:
logfile.close()
test_domain.close()
# The test finished. Aborts such as a failed boot, or a timeout,
# will skip all the below.
result = post.mortem(test,
args,
domain_prefix=domain_prefix,
finished=True,
update=True)
logger.info("%s %s %s%s%s %s", prefix, test_prefix, result, result.issues
and " ", result.issues, suffix)
# Since the the test finished (resolved in POSIX terminology)",
# emit enough JSON to fool scripts like pluto-testlist-scan.sh.
#
# A test that timed-out or crashed, isn't considered resolved.
#
# A more robust way of doing this would be to mark each of the
# console logs as complete as it is closed.
#
# More detailed information can be extracted from the debug.log.
RESULT = {
jsonutil.result.testname: test.name,
jsonutil.result.expect: test.status,
jsonutil.result.result: result,
jsonutil.result.issues: result.issues,
jsonutil.result.hosts: test.host_names,
jsonutil.result.time: jsonutil.ftime(test_total_time.start),
jsonutil.result.runtime: round(test_runtime.seconds(), 1),
jsonutil.result.boot_time: round(test_boot_time.seconds(), 1),
jsonutil.result.script_time: round(test_script_time.seconds(), 1),
jsonutil.result.total_time: round(test_total_time.seconds(), 1),
}
j = jsonutil.dumps(RESULT)
logger.info("filling '%s' with json: %s", test.result_file(), j)
with open(test.result_file(), "w") as f:
f.write(j)
f.write("\n")
test_stats.add(test, "tests", str(result))
result_stats.add_result(result, old_result)
test_stats.log_summary(logger.info,
header="updated test stats:",
prefix=" ")
result_stats.log_summary(logger.info,
header="updated test results:",
prefix=" ")
def main():
parser = argparse.ArgumentParser(description="Run tests")
# This argument's behaviour is overloaded; the shorter word "try"
# is a python word.
parser.add_argument("--retry", type=int, metavar="COUNT",
help="number of times a test should be attempted before giving up (tests are categorised as not-started (no OUTPUT directory), incomplete, failed, passed); a negative %(metavar)s selects all tests; a zero %(metavar)s selects not-started tests; a positive %(metavar)s selects not-started, incomplete and failing tests; default is to select not-started tests")
parser.add_argument("--dry-run", "-n", action="store_true")
parser.add_argument("--verbose", "-v", action="count", default=0)
parser.add_argument("--output-directory", default=None, metavar="DIRECTORY",
help="save test results as %(metavar)s/<test> instead of <test>/OUTPUT")
parser.add_argument("directories", metavar="DIRECTORY", nargs="+",
help="either a testsuite directory or a list of test directories")
testsuite.add_arguments(parser)
runner.add_arguments(parser)
post.add_arguments(parser)
logutil.add_arguments(parser)
args = parser.parse_args()
logutil.config(args)
logger = logutil.getLogger("kvmrunner")
logger.info("Options:")
logger.info(" retry: %s", args.retry or "0 (default)")
logger.info(" dry-run: %s", args.dry_run)
logger.info(" output-directory: %s", args.output_directory or "<testsuite>/<test>/OUTPUT (default)")
logger.info(" directories: %s", args.directories)
testsuite.log_arguments(logger, args)
runner.log_arguments(logger, args)
post.log_arguments(logger, args)
logutil.log_arguments(logger, args)
tests = testsuite.load_testsuite_or_tests(logger, args.directories, args,
testsuite_output_directory=args.output_directory,
log_level=logutil.INFO)
if not tests:
logger.error("test or testsuite directory invalid: %s", args.directories)
return 1
# A list of test directories was specified (i.e, not a testsuite),
# then force the tests to run.
if isinstance(tests, list) and args.retry is None:
args.retry = 1;
logger.info("Explicit directory list; forcing --retry=%d (retry failed tests)", args.retry)
# Use a default dict so no need to worry about initializing values
# to zero.
stats = Stats()
results = Results()
start_time = time.localtime()
try:
logger.info("run started at %s", datetime.now())
test_count = 0
for test in tests:
stats.add("total", test)
test_count += 1
# Would the number of tests to be [re]run be better?
test_prefix = "****** %s (test %d of %d)" % (test.name, test_count, len(tests))
ignore = testsuite.ignore(test, args)
if ignore:
stats.add("ignored", test)
# No need to log all the ignored tests when an
# explicit sub-set of tests is being run. For
# instance, when running just one test.
if not args.test_name:
logger.info("%s: ignore (%s)", test_prefix, ignore)
continue
# Implement "--retry" as described above: if retry is -ve,
# the test is always run; if there's no result, the test
# is always run; skip passed tests; else things get a
# little wierd.
retry = args.retry or 0
if retry >= 0:
result = post.mortem(test, args)
if result:
if result.passed:
logger.info("%s: passed", test_prefix)
stats.add("skipped", test)
results.add(result)
continue
if retry == 0:
logger.info("%s: %s (delete '%s' to re-test)", test_prefix,
result, test.output_directory)
stats.add("skipped", test)
results.add(result)
continue
stats.add("retry", test)
logger.info("%s: starting ...", test_prefix)
stats.add("tests", test)
debugfile = None
result = None
# At least one iteration; above will have filtered out
# skips and ignores
attempts = max(abs(retry), 1)
for attempt in range(attempts):
stats.add("attempts", test)
# Create an output directory. If there's already an
# existing OUTPUT directory copy its contents to:
#
# OUTPUT/YYYYMMDDHHMMSS.ATTEMPT
#
# so, when re-running, earlier attempts are saved. Do
# this before the OUTPUT/debug.log is started so that
# each test attempt has its own log, and otherwise, it
# too would be moved away.
saved_output_directory = None
saved_output = []
if not args.dry_run:
try:
os.mkdir(test.output_directory)
except FileExistsError:
# Include the time this test run started in
# the suffix - that way all saved results can
# be matched using a wild card.
saved_output_directory = os.path.join(test.output_directory,
"%s.%d" % (time.strftime("%Y%m%d%H%M%S", start_time), attempt))
logger.debug("moving existing OUTPUT to '%s'", saved_output_directory)
for name in os.listdir(test.output_directory):
src = os.path.join(test.output_directory, name)
dst = os.path.join(saved_output_directory, name)
if os.path.isfile(src):
os.makedirs(saved_output_directory, exist_ok=True)
os.rename(src, dst)
saved_output.append(name)
logger.debug(" moved '%s' to '%s'", src, dst)
# Start a debug log in the OUTPUT directory; include
# timing for this specific test attempt.
with logutil.TIMER, logutil.Debug(logger, os.path.join(test.output_directory, "debug.log")):
logger.info("****** test %s attempt %d of %d started at %s ******",
test.name, attempt+1, attempts, datetime.now())
# Add a log message about any saved output
# directory to the per-test-attempt debug log. It
# just looks better.
if saved_output:
logger.info("saved existing '%s' in '%s'", saved_output, saved_output_directory)
ending = "undefined"
try:
if not args.dry_run:
runner.run_test(test, max_workers=args.workers)
ending = "finished"
result = post.mortem(test, args, update=(not args.dry_run))
if not args.dry_run:
# Store enough to fool the script
# pluto-testlist-scan.sh.
logger.info("storing result in '%s'", test.result_file)
with open(test.result_file, "w") as f:
f.write('"result": "%s"\n' % result)
except pexpect.TIMEOUT as e:
ending = "timeout"
logger.exception("**** test %s timed out ****", test.name)
result = post.mortem(test, args, update=(not args.dry_run))
# Since the OUTPUT directory exists, all paths to
# here should have a non-null RESULT.
stats.add("attempts(%s:%s)" % (ending, result), test)
logger.info("****** test %s %s ******", test.name, result)
if result.passed:
break
# Above will have set RESULT (don't reach here during
# cntrl-c or crash).
results.add(result)
stats.add("tests(%s)" % result, test)
except KeyboardInterrupt:
logger.exception("**** test %s interrupted ****", test.name)
return 1
finally:
logger.info("run finished at %s", datetime.now())
level = args.verbose and logutil.INFO or logutil.DEBUG
logger.log(level, "stat details:")
stats.log_details(logger, level=level, prefix=" ")
logger.info("result details:")
results.log_details(logger, level=logutil.INFO, prefix=" ")
logger.info("stat summary:")
stats.log_summary(logger, level=logutil.INFO, prefix=" ")
logger.info("result summary:")
results.log_summary(logger, level=logutil.INFO, prefix=" ")
return 0
def _process_test(domain_prefix, test, args, test_stats, result_stats,
test_count, tests_count, boot_executor):
logger = logutil.getLogger(domain_prefix, __name__, test.name)
prefix = "******"
suffix = "******"
test_stats.add(test, "total")
test_runtime = test_boot_time = test_script_time = test_post_time = None
old_result = None
backup_directory = os.path.join(args.backup_directory, test.name)
# Would the number of tests to be [re]run be better?
test_prefix = "%s (test %d of %d)" % (test.name, test_count, tests_count)
publish.json_status(logger, args, "processing %s" % test_prefix)
with logger.time("processing test %s", test_prefix):
# always perform post mortem on the test directory.
try:
ignored, details = ignore.test(logger, args, test)
if ignored:
# If there is any pre-existing output move it to
# backup. Otherwise it looks like the test was run
# when it wasn't (and besides, the output is no longer
# applicable).
#
# The isdir() test followed by a simple move, while
# racy, should be good enough.
if os.path.isdir(test.output_directory):
logger.info("moving '%s' to '%s'", test.output_directory,
backup_directory)
os.makedirs(os.path.dirname(backup_directory),
exist_ok=True)
os.rename(test.output_directory, backup_directory)
result_stats.add_ignored(test, ignored)
test_stats.add(test, "ignored")
logger.info("%s %s ignored (%s) %s", prefix, test_prefix,
details, suffix)
return
# Be lazy when gathering the results, don't run the
# sanitizer or diff. Let post.mortem figure out if the
# test finished.
old_result = post.mortem(test,
args,
domain_prefix=domain_prefix,
quick=True)
if skip.result(logger, args, old_result):
logger.info("%s %s skipped (previously %s) %s", prefix,
test_prefix, old_result, suffix)
test_stats.add(test, "skipped")
result_stats.add_skipped(old_result)
return
if old_result:
test_stats.add(test, "tests", "retry")
logger.info("%s %s started (previously %s) ....", prefix,
test_prefix, old_result)
else:
test_stats.add(test, "tests", "try")
logger.info("%s %s started ....", prefix, test_prefix)
test_stats.add(test, "tests")
# Create just the OUTPUT/ directory; if it already exists,
# move any contents to BACKUP/. Do it file-by-file so
# that, at no point, the OUTPUT/ directory is missing
# (having an OUTPUT/ directory implies the test was
# started).
#
# Don't create the path. If the parent directory is
# missing, this will fail.
#
# By backing up each test just before it is started, a
# trail of what tests were attempted during each run is
# created.
#
# XXX:
#
# During boot, swan-transmogrify runs "chcon -R
# testing/pluto". Of course this means that each time a
# test is added and/or a test is run (adding files under
# <test>/OUTPUT), the boot process (and consequently the
# time taken to run a test) keeps increasing.
#
# By moving the directory contents to BACKUP/, which is
# not under testing/pluto/ this problem is avoided.
try:
os.mkdir(test.output_directory)
except FileNotFoundError:
# Bail, something is messed up (for instance the parent directory doesn't exist).
return
except FileExistsError:
logger.info("moving contents of '%s' to '%s'",
test.output_directory, backup_directory)
# Even if OUTPUT/ is empty, move it.
os.makedirs(backup_directory, exist_ok=True)
for name in os.listdir(test.output_directory):
src = os.path.join(test.output_directory, name)
dst = os.path.join(backup_directory, name)
logger.debug("moving '%s' to '%s'", src, dst)
os.replace(src, dst)
# Now that the OUTPUT directory is empty, start a debug
# log writing to that directory; include timing for this
# test run.
with logger.debug_time("testing %s",
test_prefix,
logfile=os.path.join(
test.output_directory, "debug.log"),
loglevel=logutil.INFO) as test_runtime:
# boot the domains
with logger.time("booting domains") as test_boot_time:
try:
test_domains = _boot_test_domains(
logger, test, domain_prefix, boot_executor)
except pexpect.TIMEOUT:
logger.exception("timeout while booting domains")
# Bail. Being unable to boot the domains is a
# disaster. The test is UNRESOLVED.
return
# Run the scripts directly
with logger.time(
"running scripts %s",
" ".join(("%s:%s" % (host, script)) for host, script in
test.host_script_tuples)) as test_script_time:
with tcpdump.Dump(
logger,
domain_prefix,
test.output_directory, [
test_domain.domain
for test_domain in test_domains.values()
],
enable=args.tcpdump):
try:
# re-direct the test-result log file
for test_domain in test_domains.values():
output = os.path.join(
test.output_directory,
test_domain.domain.host_name +
".console.verbose.txt")
test_domain.console.output(open(output, "w"))
for host, script in test.host_script_tuples:
if args.stop_at == script:
logger.error(
"stopping test run at (before executing) script %s",
script)
break
test_domain = test_domains[host]
try:
test_domain.read_file_run(script)
except BaseException as e:
# if there is an exception, write
# it to the console
test_domain.console.child.logfile.write(
"\n*** exception running script %s ***\n%s"
% (script, str(e)))
raise
for test_domain in test_domains.values():
test_domain.console.child.logfile.write(
post.DONE)
except pexpect.TIMEOUT as e:
# A test ending with a timeout gets
# treated as unresolved. Timeouts
# shouldn't occur so human intervention
# is required.
logger.error(
"**** timeout out while running test script %s ****",
script)
finally:
# Close the redirected test-result log files
logger.info(
"closing all the test domain log files")
for test_domain in test_domains.values():
outfile = test_domain.console.output()
outfile.close()
# Always disconnect from the test domains.
logger.info("closing all the test domains")
for test_domain in test_domains.values():
test_domain.close()
finally:
with logger.time("post-mortem %s", test_prefix):
# The test finished; it is assumed that post.mortem
# can deal with a crashed test.
result = post.mortem(test,
args,
domain_prefix=domain_prefix,
update=True)
logger.info("%s %s %s%s%s %s", prefix, test_prefix, result,
result.issues and " ", result.issues, suffix)
# If the test was run (a fresh run would delete RESULT)
# and finished (resolved in POSIX terminology), emit
# enough JSON to fool scripts like pluto-testlist-scan.sh.
#
# A test that timed-out or crashed, isn't considered
# resolved so the file isn't created.
#
# XXX: this should go away.
if not os.path.isfile(test.result_file()) \
and result.resolution.isresolved():
RESULT = {
jsonutil.result.testname:
test.name,
jsonutil.result.expect:
test.status,
jsonutil.result.result:
result,
jsonutil.result.issues:
result.issues,
jsonutil.result.hosts:
test.host_names,
jsonutil.result.time:
jsonutil.ftime(test_runtime.start),
jsonutil.result.runtime:
round(test_runtime.seconds(), 1),
jsonutil.result.boot_time:
round(test_boot_time.seconds(), 1),
jsonutil.result.script_time:
round(test_script_time.seconds(), 1),
jsonutil.result.total_time:
round(test_runtime.seconds(), 1),
}
j = jsonutil.dumps(RESULT)
logger.debug("filling '%s' with json: %s", test.result_file(),
j)
with open(test.result_file(), "w") as f:
f.write(j)
f.write("\n")
# Do this after RESULT is created so it too is published.
publish.everything(logger, args, result)
publish.json_status(logger, args, "finished %s" % test_prefix)
test_stats.add(test, "tests", str(result))
result_stats.add_result(result, old_result)
# test_stats.log_summary(logger.info, header="updated test stats:", prefix=" ")
result_stats.log_summary(logger.info,
header="updated test results:",
prefix=" ")
def main():
parser = argparse.ArgumentParser(description="write 'table.json' to standard output")
parser.add_argument("--verbose", "-v", action="count", default=0)
parser.add_argument("--quick", action="store_true",
help=("Use the previously generated '.console.txt' and '.console.diff' files"))
parser.add_argument("--quick-sanitize", action="store_true",
help=("Use the previously generated '.console.txt' file"))
parser.add_argument("--quick-diff", action="store_true",
help=("Use the previously generated '.console.diff' file"))
parser.add_argument("--update", action="store_true",
help=("Update the '.console.txt' and '.console.diff' files"))
parser.add_argument("--update-sanitize", action="store_true",
help=("Update the '.console.txt' file"))
parser.add_argument("--update-diff", action="store_true",
help=("Update the '.console.diff' file"))
parser.add_argument("directories", metavar="DIRECTORY", nargs="+",
help="%(metavar)s containing: a test, a testsuite (contains a TESTLIST file), a TESTLIST file, test output, or testsuite output")
post.add_arguments(parser)
testsuite.add_arguments(parser)
logutil.add_arguments(parser)
skip.add_arguments(parser)
ignore.add_arguments(parser)
args = parser.parse_args()
logutil.config(args)
logger = logutil.getLogger("kvmresults")
tests = testsuite.load_testsuite_or_tests(logger, args.directories, args)
# And check
if not tests:
logger.error("Invalid testsuite or test directories")
return 1
columns = [ "Test", "Expected", "Result", "Run time", "Responder", "..." ]
rows = []
for test in tests:
sys.stderr.write("%s\n" % test.name)
# Filter out tests that are being ignored?
ignored, include_ignored, details = ignore.test(logger, args, test)
if ignored:
if not include_ignored:
continue
# Filter out tests that have not been run
result = None
if not ignored:
result = post.mortem(test, args, baseline=None,
output_directory=test.saved_output_directory,
test_finished=None,
skip_sanitize=args.quick or args.quick_sanitize,
skip_diff=args.quick or args.quick_diff,
update=args.update,
update_sanitize=args.update_sanitize,
update_diff=args.update_diff)
if skip.result(logger, args, result):
continue
row = [
test.name,
test.expected_result, str(result),
"run-time"
]
for host in sorted(test.host_names):
errors = result.errors.errors
if host in errors:
row.append("%s %s" % (host, " ".join(sorted(errors[host]))))
else:
row.append("%s passed" % (host))
rows.append(row)
summary = {
"Total": 0,
"passed": 0,
"failed": 0,
"abort": 0,
"missing baseline": 0,
"missing console output": 0,
"missing OUTPUT": 0,
"missing RESULT": 0,
"ASSERT": 0,
"CORE": 0,
"EXPECT": 0,
"GPFAULT": 0,
"SEGFAULT": 0,
"date": "0000-00-00",
"dir": "testing/pluto",
"runtime": 0,
"runtime_str": "00:00:00",
}
table = {
"suffix": "/OUTPUT",
"summary": summary,
"columns": columns,
"rows": rows,
"runDir": "???",
}
print(json.dumps(table, indent=2))
return 0
def _process_test(domain_prefix, test, args, test_stats, result_stats,
test_count, tests_count, boot_executor):
logger = logutil.getLogger(domain_prefix, __name__, test.name)
prefix = "******"
suffix = "******"
test_stats.add(test, "total")
test_runtime = test_boot_time = test_script_time = test_start_time = test_total_time = None
# Would the number of tests to be [re]run be better?
test_prefix = "%s (test %d of %d)" % (test.name, test_count, tests_count)
with logger.time("processing test %s", test_prefix) as test_total_time:
ignored, include_ignored, details = ignore.test(logger, args, test)
if ignored and not include_ignored:
result_stats.add_ignored(test, ignored)
test_stats.add(test, "ignored")
# No need to log all the ignored tests when an explicit
# sub-set of tests is being run. For instance, when running
# just one test.
if not args.test_name:
logger.info("$s %s ignored (%s) %s", prefix, test_prefix,
details, suffix)
return
# Be lazy with gathering the results, don't run the sanitizer or
# diff.
#
# XXX: There is a bug here where the only difference is white
# space. The test will show up as failed when it previously
# showed up as a white-space pass.
#
# The presence of the RESULT file is a proxy for detecting that
# the test was incomplete.
old_result = post.mortem(test,
args,
test_finished=None,
skip_diff=True,
skip_sanitize=True)
if skip.result(logger, args, old_result):
logger.info("%s %s skipped (previously %s) %s", prefix,
test_prefix, old_result, suffix)
test_stats.add(test, "skipped")
result_stats.add_skipped(old_result)
return
if old_result:
test_stats.add(test, "tests", "retry")
logger.info("%s %s started (previously %s) ....", prefix,
test_prefix, old_result)
else:
test_stats.add(test, "tests", "try")
logger.info("%s %s started ....", prefix, test_prefix)
test_stats.add(test, "tests")
# Create the OUTPUT/ directory; if it already exists, move any
# contents to BACKUP/. Do it file-by-file so that, at no
# point, the OUTPUT/ directory missing (presence of OUTPUT/
# implies the test was started).
#
# By backing up each test just before it is started, a trail
# of what tests were attempted during each run is created.
#
# XXX:
#
# During boot, swan-transmogrify runs "chcon -R
# testing/pluto". Of course this means that each time a test
# is added and/or a test is run (adding files under
# <test>/OUTPUT), the boot process (and consequently the time
# taken to run a test) keeps increasing.
#
# By moving the directory contents to BACKUP/, which is not
# under testing/pluto/ this problem is avoided.
try:
os.mkdir(test.output_directory)
except FileExistsError:
backup_directory = os.path.join(args.backup_directory, test.name)
logger.info("moving contents of '%s' to '%s'",
test.output_directory, backup_directory)
# Even if OUTPUT/ is empty, copy it.
os.makedirs(backup_directory, exist_ok=True)
for name in os.listdir(test.output_directory):
src = os.path.join(test.output_directory, name)
dst = os.path.join(backup_directory, name)
logger.debug("moving '%s' to '%s'", src, dst)
os.replace(src, dst)
# Now that the OUTPUT directory is empty, start a debug log
# writing to that directory; include timing for this test run.
with logger.debug_time("testing %s",
test_prefix,
logfile=os.path.join(test.output_directory,
"debug.log"),
loglevel=logutil.INFO) as test_runtime:
with logger.time("booting domains") as test_boot_time:
try:
test_domains = _boot_test_domains(logger, test,
domain_prefix,
boot_executor)
except pexpect.TIMEOUT:
logger.exception("timeout while booting domains",
test.name)
# Bail before RESULT is written - being unable to
# boot the domains is a disaster.
return
# Run the scripts directly
with logger.time(
"running scripts %s",
" ".join(("%s:%s" % (host, script)) for host, script in
test.host_script_tuples)) as test_script_time:
try:
# re-direct the test-result log file
for test_domain in test_domains.values():
output = os.path.join(
test.output_directory,
test_domain.domain.host_name +
".console.verbose.txt")
test_domain.console.output(open(output, "w"))
for host, script in test.host_script_tuples:
if args.stop_at == script:
logger.error(
"stopping test run at (before executing) script %s",
script)
break
test_domain = test_domains[host]
test_domain.read_file_run(script)
result = post.mortem(test,
args,
test_finished=True,
update=True)
except pexpect.TIMEOUT as e:
logger.exception(
"**** timeout out while running script %s ****",
script)
# Still peform post-mortem so that errors are
# captured, but force the result to
# incomplete.
result = post.mortem(test,
args,
test_finished=False,
update=True)
finally:
# Close the redirected test-result log files
for test_domain in test_domains.values():
logfile = test_domain.console.output()
logfile.close()
# Always disconnect from the test domains.
logger.info("closing all test domains")
for test_domain in test_domains.values():
logfile = test_domain.console.output()
if logfile:
logfile.close()
test_domain.close()
# Above will have set RESULT. Exceptions such as control-c or
# a crash bypass this code.
logger.info("%s %s %s%s%s %s", prefix, test_prefix, result, result.errors
and " ", result.errors, suffix)
# Since the test finished, emit enough JSON to fool scripts like
# pluto-testlist-scan.sh.
#
# This also leaves a simple marker to indicate that the test
# finished.
#
# A more robust way of doing this would be to mark each of the
# console logs as complete as it is closed.
#
# More detailed information can be extracted from the debug.log.
hosts = {}
for host in sorted(test.host_names):
if host in result.errors:
hosts[host] = [error for error in result.errors[host]]
else:
hosts[host] = ["passed"]
RESULT = {
jsonutil.result.testname: test.name,
jsonutil.result.expect: test.expected_result,
jsonutil.result.result: str(result),
jsonutil.result.time: jsonutil.ftime(datetime.now()),
jsonutil.result.runtime: round(test_runtime.seconds(), 1),
jsonutil.result.boot_time: round(test_boot_time.seconds(), 1),
jsonutil.result.script_time: round(test_script_time.seconds(), 1),
jsonutil.result.total_time: round(test_total_time.seconds(), 1),
jsonutil.result.hosts: hosts,
}
j = jsonutil.dumps(RESULT)
logger.info("filling '%s' with json: %s", test.result_file(), j)
with open(test.result_file(), "w") as f:
f.write(j)
f.write("\n")
test_stats.add(test, "tests", str(result))
result_stats.add_result(result, old_result)
test_stats.log_summary(logger.info,
header="updated test stats:",
prefix=" ")
result_stats.log_summary(logger.info,
header="updated test results:",
prefix=" ")
def main():
parser = argparse.ArgumentParser(description="Run tests")
# This argument's behaviour is overloaded; the shorter word "try"
# is a python word.
parser.add_argument(
"--retry",
type=int,
metavar="COUNT",
help=
"number of times a test should be attempted before giving up (tests are categorised as not-started (no OUTPUT directory), incomplete, failed, passed); a negative %(metavar)s selects all tests; a zero %(metavar)s selects not-started tests; a positive %(metavar)s selects not-started, incomplete and failing tests; default is to select not-started tests"
)
parser.add_argument("--dry-run", "-n", action="store_true")
parser.add_argument("--verbose", "-v", action="count", default=0)
parser.add_argument(
"--output-directory",
default=None,
metavar="DIRECTORY",
help="save test results as %(metavar)s/<test> instead of <test>/OUTPUT"
)
parser.add_argument(
"directories",
metavar="DIRECTORY",
nargs="+",
help="either a testsuite directory or a list of test directories")
testsuite.add_arguments(parser)
runner.add_arguments(parser)
post.add_arguments(parser)
logutil.add_arguments(parser)
args = parser.parse_args()
logutil.config(args)
logger = logutil.getLogger("kvmrunner")
logger.info("Options:")
logger.info(" retry: %s", args.retry or "0 (default)")
logger.info(" dry-run: %s", args.dry_run)
logger.info(" output-directory: %s", args.output_directory
or "<testsuite>/<test>/OUTPUT (default)")
logger.info(" directories: %s", args.directories)
testsuite.log_arguments(logger, args)
runner.log_arguments(logger, args)
post.log_arguments(logger, args)
logutil.log_arguments(logger, args)
tests = testsuite.load_testsuite_or_tests(
logger,
args.directories,
args,
testsuite_output_directory=args.output_directory,
log_level=logutil.INFO)
if not tests:
logger.error("test or testsuite directory invalid: %s",
args.directories)
return 1
# A list of test directories was specified (i.e, not a testsuite),
# then force the tests to run.
if isinstance(tests, list) and args.retry is None:
args.retry = 1
logger.info(
"Explicit directory list; forcing --retry=%d (retry failed tests)",
args.retry)
# Use a default dict so no need to worry about initializing values
# to zero.
stats = Stats()
results = Results()
start_time = time.localtime()
try:
logger.info("run started at %s", datetime.now())
test_count = 0
for test in tests:
stats.add("total", test)
test_count += 1
# Would the number of tests to be [re]run be better?
test_prefix = "****** %s (test %d of %d)" % (test.name, test_count,
len(tests))
ignore = testsuite.ignore(test, args)
if ignore:
stats.add("ignored", test)
# No need to log all the ignored tests when an
# explicit sub-set of tests is being run. For
# instance, when running just one test.
if not args.test_name:
logger.info("%s: ignore (%s)", test_prefix, ignore)
continue
# Implement "--retry" as described above: if retry is -ve,
# the test is always run; if there's no result, the test
# is always run; skip passed tests; else things get a
# little wierd.
retry = args.retry or 0
if retry >= 0:
result = post.mortem(test, args)
if result:
if result.passed:
logger.info("%s: passed", test_prefix)
stats.add("skipped", test)
results.add(result)
continue
if retry == 0:
logger.info("%s: %s (delete '%s' to re-test)",
test_prefix, result, test.output_directory)
stats.add("skipped", test)
results.add(result)
continue
stats.add("retry", test)
logger.info("%s: starting ...", test_prefix)
stats.add("tests", test)
debugfile = None
result = None
# At least one iteration; above will have filtered out
# skips and ignores
attempts = max(abs(retry), 1)
for attempt in range(attempts):
stats.add("attempts", test)
# Create an output directory. If there's already an
# existing OUTPUT directory copy its contents to:
#
# OUTPUT/YYYYMMDDHHMMSS.ATTEMPT
#
# so, when re-running, earlier attempts are saved. Do
# this before the OUTPUT/debug.log is started so that
# each test attempt has its own log, and otherwise, it
# too would be moved away.
saved_output_directory = None
saved_output = []
if not args.dry_run:
try:
os.mkdir(test.output_directory)
except FileExistsError:
# Include the time this test run started in
# the suffix - that way all saved results can
# be matched using a wild card.
saved_output_directory = os.path.join(
test.output_directory, "%s.%d" % (time.strftime(
"%Y%m%d%H%M%S", start_time), attempt))
logger.debug("moving existing OUTPUT to '%s'",
saved_output_directory)
for name in os.listdir(test.output_directory):
src = os.path.join(test.output_directory, name)
dst = os.path.join(saved_output_directory, name)
if os.path.isfile(src):
os.makedirs(saved_output_directory,
exist_ok=True)
os.rename(src, dst)
saved_output.append(name)
logger.debug(" moved '%s' to '%s'", src, dst)
# Start a debug log in the OUTPUT directory; include
# timing for this specific test attempt.
with logutil.TIMER, logutil.Debug(
logger, os.path.join(test.output_directory,
"debug.log")):
logger.info(
"****** test %s attempt %d of %d started at %s ******",
test.name, attempt + 1, attempts, datetime.now())
# Add a log message about any saved output
# directory to the per-test-attempt debug log. It
# just looks better.
if saved_output:
logger.info("saved existing '%s' in '%s'",
saved_output, saved_output_directory)
ending = "undefined"
try:
if not args.dry_run:
runner.run_test(test, max_workers=args.workers)
ending = "finished"
result = post.mortem(test,
args,
update=(not args.dry_run))
if not args.dry_run:
# Store enough to fool the script
# pluto-testlist-scan.sh.
logger.info("storing result in '%s'",
test.result_file)
with open(test.result_file, "w") as f:
f.write('"result": "%s"\n' % result)
except pexpect.TIMEOUT as e:
ending = "timeout"
logger.exception("**** test %s timed out ****",
test.name)
result = post.mortem(test,
args,
update=(not args.dry_run))
# Since the OUTPUT directory exists, all paths to
# here should have a non-null RESULT.
stats.add("attempts(%s:%s)" % (ending, result), test)
logger.info("****** test %s %s ******", test.name, result)
if result.passed:
break
# Above will have set RESULT (don't reach here during
# cntrl-c or crash).
results.add(result)
stats.add("tests(%s)" % result, test)
except KeyboardInterrupt:
logger.exception("**** test %s interrupted ****", test.name)
return 1
finally:
logger.info("run finished at %s", datetime.now())
level = args.verbose and logutil.INFO or logutil.DEBUG
logger.log(level, "stat details:")
stats.log_details(logger, level=level, prefix=" ")
logger.info("result details:")
results.log_details(logger, level=logutil.INFO, prefix=" ")
logger.info("stat summary:")
stats.log_summary(logger, level=logutil.INFO, prefix=" ")
logger.info("result summary:")
results.log_summary(logger, level=logutil.INFO, prefix=" ")
return 0
def results(logger, tests, baseline, args, result_stats):
for test in tests:
# Produce separate runtimes for each test.
with logutil.TIMER:
logger.debug("start processing test %s", test.name)
# Filter out tests that are being ignored?
ignore = testsuite.ignore(test, args)
if ignore:
result_stats.add_ignore(test, ignore)
if ignore and not args.list_ignored:
continue
# Filter out tests that have not been run
result = None
if not ignore and args.print_result:
result = post.mortem(test, args, baseline=baseline,
output_directory=test.saved_output_directory,
skip_sanitize=args.quick or args.quick_sanitize,
skip_diff=args.quick or args.quick_diff,
update=args.update,
update_sanitize=args.update_sanitize,
update_diff=args.update_diff)
if not result and not args.list_untested:
continue
result_stats.add_result(result)
sep = ""
# Print the test's name/path
if not args.prefix_directory and not args.prefix_name and not args.prefix_output_directory:
# By default: when the path given on the command line
# explicitly specifies a test's output directory
# (found in TEST.SAVED_OUTPUT_DIRECTORY), print that;
# otherwise print the path to the test's directory.
print(sep, end="")
print((test.saved_output_directory
and test.saved_output_directory
or test.directory), end="")
sep = " "
else:
# Print the test name/path per command line
if args.prefix_name:
print(sep, end="")
print(test.name, end="")
sep = " "
if args.prefix_directory:
print(sep, end="")
print(test.directory, end="")
sep = " "
if args.prefix_output_directory:
print(sep, end="")
print((test.saved_output_directory
and test.saved_output_directory
or test.output_directory), end="")
sep = " "
if ignore:
print(sep, end="")
print("ignored", ignore, end="")
sep = " "
if result:
print(sep, end="")
if result.errors:
print(result, result.errors, end="")
else:
print(result, end="")
sep = " "
if args.print_domains:
for name in test.domain_names():
print(sep, end="")
print(name, end="")
sep = " "
if args.print_initiators:
for name in test.initiator_names():
print(sep, end="")
print(name, end="")
sep = " "
if args.print_scripts:
for scripts in test.scripts():
for name, script in scripts.items():
print(sep, end="")
print(name + ":" + script, end="")
sep = ","
sep = " "
print()
if args.print_diff and result:
for domain in result.diffs:
for line in result.diffs[domain]:
if line:
print(line)
sys.stdout.flush()
logger.debug("stop processing test %s", test.name)
def main():
parser = argparse.ArgumentParser(description="list all tests in the form: <test> [ <directory> ] [ <result> <details...> ]",
epilog="By default this tool uses 'sanitizer.sh' and 'diff' to generate up-to-the-minuite test results (the previously generated files 'OUTPUT/*.console.txt' and 'OUTPUT/*.console.diff' are ignored). While this makes things a little slower, it has the benefit of always providing the most up-to-date and correct results (for instance, changes to known-good files are reflected immediately). If a BASELINE directory is specified, anywhere a test result is different to the baseline is also identified.")
parser.add_argument("--verbose", "-v", action="count", default=0)
parser.add_argument("--quick", action="store_true",
help=("Use the previously generated '.console.txt' and '.console.diff' files"))
parser.add_argument("--quick-sanitize", action="store_true",
help=("Use the previously generated '.console.txt' file"))
parser.add_argument("--quick-diff", action="store_true",
help=("Use the previously generated '.console.diff' file"))
parser.add_argument("--update", action="store_true",
help=("Update the '.console.txt' and '.console.diff' files"))
parser.add_argument("--update-sanitize", action="store_true",
help=("Update the '.console.txt' file"))
parser.add_argument("--update-diff", action="store_true",
help=("Update the '.console.diff' file"))
parser.add_argument("--print-directory", action="store_true")
parser.add_argument("--print-name", action="store_true")
# parser.add_argument("--print-result", action="store_true")
parser.add_argument("--print-diff", action="store_true")
parser.add_argument("--print-args", action="store_true")
parser.add_argument("--print-output-directory", action="store_true")
parser.add_argument("--list-ignored", action="store_true",
help="include ignored tests in the list")
parser.add_argument("--list-untested", action="store_true",
help="include untested tests in the list")
parser.add_argument("directories", metavar="TEST-DIRECTORY", nargs="+",
help=("Either a testsuite (only one) or test directory"))
# Note: this argument serves as documentation only. The
# TEST-DIRECTORY argument always consume all remaining parameters.
parser.add_argument("baseline", metavar="BASELINE-DIRECTORY", nargs="?",
help=("An optional testsuite directory containing"
" results from a previous test run"))
post.add_arguments(parser)
testsuite.add_arguments(parser)
logutil.add_arguments(parser)
args = parser.parse_args()
logutil.config(args)
logger = logutil.getLogger("kvmresults")
# The option -vvvvvvv is a short circuit for these; make
# re-ordering easy by using V as a counter.
v = 0
args.print_directory = args.print_directory or args.verbose > v
args.print_name = args.print_name or args.verbose > v
v += 1
args.print_output_directory = args.print_output_directory or args.verbose > v
v += 1
args.list_untested = args.list_untested or args.verbose > v ; v += 1
args.list_ignored = args.list_ignored or args.verbose > v ; v += 1
v += 1
args.print_args = args.print_args or args.verbose > v
if args.print_args:
post.log_arguments(logger, args)
testsuite.log_arguments(logger, args)
logutil.log_arguments(logger, args)
return 1
# Is the last argument some sort of baseline? If it is, pre-load
# it.
#
# XXX: Should also support something like --baseline-testsuite and
# --baseline-output parameters.
baseline = None
if len(args.directories) > 1:
# If there is more than one directory then, perhaps, the last
# one is a baseline. A baseline might be: a complete
# testsuite snapshot; or just output saved as
# testing/pluto/OUTPUT/TESTDIR.
baseline = testsuite.load(logger, args.directories[-1], args,
error_level=logutil.DEBUG)
if baseline:
# discard the last argument as consumed above.
logger.debug("discarding baseline testsuite argument '%s'", args.directories[-1])
args.directories.pop()
tests = testsuite.load_testsuite_or_tests(logger, args.directories, args)
# And check
if not tests:
logger.error("Invalid testsuite or test directories")
return 1
# When an explicit list of directories was specified always print
# all of them (otherwise, tests seem to get lost).
if isinstance(tests, list):
args.list_untested = True
for test in tests:
# Produce separate runtimes for each test.
with logutil.TIMER:
logger.debug("start processing test %s", test.name)
# Filter out tests that are being ignored?
ignore = testsuite.ignore(test, args)
if ignore and not args.list_ignored:
continue
# Filter out tests that have not been run?
result = None
if not ignore:
result = post.mortem(test, args, baseline=baseline,
output_directory=test.saved_output_directory,
skip_sanitize=args.quick or args.quick_sanitize,
skip_diff=args.quick or args.quick_diff,
update=args.update,
update_sanitize=args.update_sanitize,
update_diff=args.update_diff)
if not result and not args.list_untested:
continue
sep = ""
# Print the test's name/path
if not args.print_directory and not args.print_name and not args.print_output_directory:
# By default: when the path given on the command line
# explicitly specifies a test's output directory
# (found in TEST.SAVED_OUTPUT_DIRECTORY), print that;
# otherwise print the path to the test's directory.
print(sep, end="")
print((test.saved_output_directory
and test.saved_output_directory
or test.directory), end="")
sep = " "
else:
# Print the test name/path per command line
if args.print_name:
print(sep, end="")
print(test.name, end="")
sep = " "
if args.print_directory:
print(sep, end="")
print(test.directory, end="")
sep = " "
if args.print_output_directory:
print(sep, end="")
print((test.saved_output_directory
and test.saved_output_directory
or test.output_directory), end="")
sep = " "
if ignore:
print(sep, end="")
print("ignored", ignore, end="")
sep = " "
print(sep, end="")
if result.errors:
print(result, result.errors, end="")
else:
print(result, end="")
sep = " "
print()
if args.print_diff and result:
for domain in result.diffs:
for line in result.diffs[domain]:
if line:
print(line)
sys.stdout.flush()
logger.debug("stop processing test %s", test.name)
return 0
def main():
parser = argparse.ArgumentParser(
description="list all tests in the form: <test> [ <directory> ] [ <result> <details...> ]",
epilog="By default this tool uses 'sanitizer.sh' and 'diff' to generate up-to-the-minuite test results (the previously generated files 'OUTPUT/*.console.txt' and 'OUTPUT/*.console.diff' are ignored). While this makes things a little slower, it has the benefit of always providing the most up-to-date and correct results (for instance, changes to known-good files are reflected immediately).",
)
parser.add_argument("--verbose", "-v", action="count", default=0)
parser.add_argument(
"--quick", action="store_true", help=("Use the previously generated '.console.txt' and '.console.diff' files")
)
parser.add_argument(
"--quick-sanitize", action="store_true", help=("Use the previously generated '.console.txt' file")
)
parser.add_argument("--quick-diff", action="store_true", help=("Use the previously generated '.console.diff' file"))
parser.add_argument("--update", action="store_true", help=("Update the '.console.txt' and '.console.diff' files"))
parser.add_argument("--update-sanitize", action="store_true", help=("Update the '.console.txt' file"))
parser.add_argument("--update-diff", action="store_true", help=("Update the '.console.diff' file"))
parser.add_argument("--print-directory", action="store_true")
parser.add_argument("--print-name", action="store_true")
parser.add_argument("--print-result", action="store_true")
parser.add_argument("--print-diff", action="store_true")
parser.add_argument("--print-args", action="store_true")
parser.add_argument("--list-ignored", action="store_true", help="include ignored tests in the list")
parser.add_argument("--list-untested", action="store_true", help="include untested tests in the list")
parser.add_argument(
"directories", metavar="TEST-DIRECTORY", nargs="+", help=("Either a testsuite (only one) or test directory")
)
# Note: this argument serves as documentation only. The
# TEST-DIRECTORY argument always consume all remaining parameters.
parser.add_argument(
"baseline",
metavar="BASELINE-DIRECTORY",
nargs="?",
help=("An optional testsuite directory containing" " results from a previous test run"),
)
post.add_arguments(parser)
testsuite.add_arguments(parser)
logutil.add_arguments(parser)
args = parser.parse_args()
logutil.config(args)
logger = logutil.getLogger("kvmresults")
# The option -vvvvvvv is a short circuit for these; make
# re-ordering easy by using V as a counter.
v = 0
args.print_directory = args.print_directory or args.verbose > v
args.print_name = args.print_name or args.verbose > v
v += 1
args.list_untested = args.list_untested or args.verbose > v
v += 1
args.list_ignored = args.list_ignored or args.verbose > v
v += 1
v += 1
args.print_args = args.print_args or args.verbose > v
# By default print the relative directory path.
if not args.print_directory and not args.print_name:
args.print_directory = True
if args.print_args:
post.log_arguments(logger, args)
testsuite.log_arguments(logger, args)
logutil.log_arguments(logger, args)
return 1
# If there is more than one directory then the last might be the
# baseline. Try loading it as a testsuite (baselines are
# testsuites) to see if that is the case.
basetests = None
tests = None
if len(args.directories) > 1:
# Perhaps the last argument is the baseline? Suppress any
# nasty errors.
basetests = testsuite.load(logger, args.directories[-1], error_level=logutil.DEBUG)
if basetests:
logger.debug("basetests loaded from '%s'", basetests.directory)
args.directories.pop()
tests = testsuite.load_testsuite_or_tests(logger, args.directories)
logger.debug("basetests=%s", basetests)
logger.debug("tests=%s", tests)
# And check
if not tests:
logger.error("Invalid testsuite or test directories")
return 1
# When an explicit list of directories was specified always print
# all of them (otherwise, tests seem to get lost).
if isinstance(tests, list):
args.list_untested = True
# Preload the baseline. This avoids re-scanning the TESTLIST.
# Also, passing the full baseline to Test.results() lets that
# function differentiate between a baseline missing results or
# being entirely absent.
baseline = None
if basetests:
baseline = {}
for test in basetests:
baseline[test.name] = test
for test in tests:
# Produce separate runtimes for each test.
with logutil.TIMER:
logger.debug("start processing test %s", test.name)
# Filter out tests that are being ignored?
ignore = testsuite.ignore(test, args)
if ignore and not args.list_ignored:
continue
# Filter out tests that have not been run?
result = None
if not ignore:
result = post.mortem(
test,
args,
baseline=baseline,
output_directory=test.old_output_directory,
skip_sanitize=args.quick or args.quick_sanitize,
skip_diff=args.quick or args.quick_diff,
update=args.update,
update_sanitize=args.update_sanitize,
update_diff=args.update_diff,
)
if not result and not args.list_untested:
continue
sep = ""
if args.print_name:
print(sep, end="")
print(test.name, end="")
sep = " "
if args.print_directory:
print(sep, end="")
print(test.directory, end="")
sep = " "
if ignore:
print(sep, end="")
print("ignored", ignore, end="")
sep = " "
if result:
print(sep, end="")
print(result, end="")
sep = " "
print()
if args.print_diff and result:
for domain in result.diffs:
for line in result.diffs[domain]:
if line:
print(line)
sys.stdout.flush()
logger.debug("stop processing test %s", test.name)
return 0
def _process_test(domain_prefix, test, args, test_stats, result_stats, test_count, tests_count, boot_executor):
logger = logutil.getLogger(domain_prefix, __name__, test.name)
prefix = "******"
suffix = "******"
test_stats.add(test, "total")
test_runtime = test_boot_time = test_script_time = test_total_time = None
# Would the number of tests to be [re]run be better?
test_prefix = "%s (test %d of %d)" % (test.name, test_count, tests_count)
with logger.time("processing test %s", test_prefix) as test_total_time:
ignored, details = ignore.test(logger, args, test)
if ignored:
result_stats.add_ignored(test, ignored)
test_stats.add(test, "ignored")
logger.info("%s %s ignored (%s) %s",
prefix, test_prefix, details, suffix)
return
# Be lazy when gathering the results, don't run the sanitizer
# or diff. Let post.mortem figure out if the test finished.
old_result = post.mortem(test, args, domain_prefix=domain_prefix,
quick=True, finished=None)
if skip.result(logger, args, old_result):
logger.info("%s %s skipped (previously %s) %s",
prefix, test_prefix, old_result, suffix)
test_stats.add(test, "skipped")
result_stats.add_skipped(old_result)
return
if old_result:
test_stats.add(test, "tests", "retry")
logger.info("%s %s started (previously %s) ....",
prefix, test_prefix, old_result)
else:
test_stats.add(test, "tests", "try")
logger.info("%s %s started ....", prefix, test_prefix)
test_stats.add(test, "tests")
# Create just the OUTPUT/ directory; if it already exists,
# move any contents to BACKUP/. Do it file-by-file so that,
# at no point, the OUTPUT/ directory is missing (having an
# OUTPUT/ directory implies the test was started).
#
# Don't create the path. If the parent directory is missing,
# this will fail.
#
# By backing up each test just before it is started, a trail
# of what tests were attempted during each run is created.
#
# XXX:
#
# During boot, swan-transmogrify runs "chcon -R
# testing/pluto". Of course this means that each time a test
# is added and/or a test is run (adding files under
# <test>/OUTPUT), the boot process (and consequently the time
# taken to run a test) keeps increasing.
#
# By moving the directory contents to BACKUP/, which is not
# under testing/pluto/ this problem is avoided.
try:
os.mkdir(test.output_directory)
except FileNotFoundError:
# Bail, something is messed up (for instance the parent directory doesn't exist).
return
except FileExistsError:
backup_directory = os.path.join(args.backup_directory, test.name)
logger.info("moving contents of '%s' to '%s'",
test.output_directory, backup_directory)
# Even if OUTPUT/ is empty, copy it.
os.makedirs(backup_directory, exist_ok=True)
for name in os.listdir(test.output_directory):
src = os.path.join(test.output_directory, name)
dst = os.path.join(backup_directory, name)
logger.debug("moving '%s' to '%s'", src, dst)
os.replace(src, dst)
# Now that the OUTPUT directory is empty, start a debug log
# writing to that directory; include timing for this test run.
with logger.debug_time("testing %s", test_prefix,
logfile=os.path.join(test.output_directory,
"debug.log"),
loglevel=logutil.INFO) as test_runtime:
with logger.time("booting domains") as test_boot_time:
try:
test_domains = _boot_test_domains(logger, test, domain_prefix, boot_executor)
except pexpect.TIMEOUT:
logger.exception("timeout while booting domains")
# Bail before RESULT is written - being unable to
# boot the domains is a disaster. The test is
# UNRESOLVED.
return
# Run the scripts directly
with logger.time("running scripts %s",
" ".join(("%s:%s" % (host, script))
for host, script in test.host_script_tuples)) as test_script_time:
with tcpdump.Dump(logger, domain_prefix, test.output_directory,
[test_domain.domain for test_domain in test_domains.values()],
enable=args.tcpdump):
try:
# re-direct the test-result log file
for test_domain in test_domains.values():
output = os.path.join(test.output_directory,
test_domain.domain.host_name + ".console.verbose.txt")
test_domain.console.output(open(output, "w"))
try:
for host, script in test.host_script_tuples:
if args.stop_at == script:
logger.error("stopping test run at (before executing) script %s", script)
break
test_domain = test_domains[host]
test_domain.read_file_run(script)
except pexpect.TIMEOUT as e:
# A test ending with a timeout is still a
# finished test. Analysis of the results
# will detect this and flag it as a fail.
logger.error("**** timeout out while running script %s ****", script)
finally:
# Close the redirected test-result log files
for test_domain in test_domains.values():
logfile = test_domain.console.output()
logfile.close()
# Always disconnect from the test domains.
logger.info("closing all test domains")
for test_domain in test_domains.values():
logfile = test_domain.console.output()
if logfile:
logfile.close()
test_domain.close()
# The test finished. Aborts such as a failed boot, or a timeout,
# will skip all the below.
result = post.mortem(test, args, domain_prefix=domain_prefix,
finished=True, update=True)
logger.info("%s %s %s%s%s %s", prefix, test_prefix, result,
result.issues and " ", result.issues, suffix)
# Since the the test finished (resolved in POSIX terminology)",
# emit enough JSON to fool scripts like pluto-testlist-scan.sh.
#
# A test that timed-out or crashed, isn't considered resolved.
#
# A more robust way of doing this would be to mark each of the
# console logs as complete as it is closed.
#
# More detailed information can be extracted from the debug.log.
RESULT = {
jsonutil.result.testname: test.name,
jsonutil.result.expect: test.status,
jsonutil.result.result: result,
jsonutil.result.issues: result.issues,
jsonutil.result.hosts: test.host_names,
jsonutil.result.time: jsonutil.ftime(test_total_time.start),
jsonutil.result.runtime: round(test_runtime.seconds(), 1),
jsonutil.result.boot_time: round(test_boot_time.seconds(), 1),
jsonutil.result.script_time: round(test_script_time.seconds(), 1),
jsonutil.result.total_time: round(test_total_time.seconds(), 1),
}
j = jsonutil.dumps(RESULT)
logger.info("filling '%s' with json: %s", test.result_file(), j)
with open(test.result_file(), "w") as f:
f.write(j)
f.write("\n")
test_stats.add(test, "tests", str(result))
result_stats.add_result(result, old_result)
test_stats.log_summary(logger.info, header="updated test stats:", prefix=" ")
result_stats.log_summary(logger.info, header="updated test results:", prefix=" ")
def main():
parser = argparse.ArgumentParser(description="Run tests")
# This argument's behaviour is overloaded; the shorter word "try"
# is a python word.
parser.add_argument("--retry", type=int, metavar="COUNT",
help="number of times a test should be attempted before giving up (tests are categorised as not-started (no OUTPUT directory), incomplete, failed, passed); a negative %(metavar)s selects all tests; a zero %(metavar)s selects not-started tests; a positive %(metavar)s selects not-started, incomplete and failing tests; default is to select not-started tests")
parser.add_argument("--dry-run", "-n", action="store_true")
parser.add_argument("--verbose", "-v", action="count", default=0)
parser.add_argument("--output-directory", default=None, metavar="DIRECTORY",
help="save test results as %(metavar)s/<test> instead of <test>/OUTPUT")
parser.add_argument("directories", metavar="DIRECTORY", nargs="+",
help="either a testsuite directory or a list of test directories")
testsuite.add_arguments(parser)
runner.add_arguments(parser)
post.add_arguments(parser)
logutil.add_arguments(parser)
args = parser.parse_args()
logutil.config(args)
logger = logutil.getLogger("kvmrunner")
logger.info("Options:")
logger.info(" retry: %s", args.retry or "0 (default)")
logger.info(" dry-run: %s", args.dry_run)
logger.info(" output-directory: %s", args.output_directory or "<testsuite>/<test>/OUTPUT (default)")
logger.info(" directories: %s", args.directories)
testsuite.log_arguments(logger, args)
runner.log_arguments(logger, args)
post.log_arguments(logger, args)
logutil.log_arguments(logger, args)
tests = testsuite.load_testsuite_or_tests(logger, args.directories, args,
testsuite_output_directory=args.output_directory,
log_level=logutil.INFO)
if not tests:
logger.error("test or testsuite directory invalid: %s", args.directories)
return 1
# A list of test directories was specified (i.e, not a testsuite),
# then force the tests to run.
if isinstance(tests, list) and args.retry is None:
args.retry = 1;
logger.info("Explicit directory list; forcing --retry=%d (retry failed tests)", args.retry)
# Use a default dict so no need to worry about initializing values
# to zero.
stats = Stats()
results = Results()
start_time = time.localtime()
try:
logger.info("run started at %s", datetime.now())
test_count = 0
for test in tests:
stats.add("total", test)
test_count += 1
# Would the number of tests to be [re]run be better?
test_prefix = "****** %s (test %d of %d)" % (test.name, test_count, len(tests))
ignore = testsuite.ignore(test, args)
if ignore:
stats.add("ignored", test)
# No need to log all the ignored tests when an
# explicit sub-set of tests is being run. For
# instance, when running just one test.
if not args.test_name:
logger.info("%s: ignore (%s)", test_prefix, ignore)
continue
# Implement "--retry" as described above: if retry is -ve,
# the test is always run; if there's no result, the test
# is always run; skip passed tests; else things get a
# little wierd.
retry = args.retry or 0
if retry >= 0:
result = post.mortem(test, args)
if result:
if result.passed:
logger.info("%s: passed", test_prefix)
stats.add("skipped", test)
results.add(result)
continue
if retry == 0:
logger.info("%s: %s (delete '%s' to re-test)", test_prefix,
result, test.output_directory)
stats.add("skipped", test)
results.add(result)
continue
stats.add("retry", test)
logger.info("%s: starting ...", test_prefix)
stats.add("tests", test)
debugfile = None
result = None
# At least one iteration; above will have filtered out
# skips and ignores
attempts = max(abs(retry), 1)
for attempt in range(attempts):
stats.add("attempts", test)
# On first attempt (attempt == 0), empty the
# <test>/OUTPUT/ directory of all contents. On
# subsequent attempts, move the files from the
# previous attempt to <test>/OUTPUT/<attempt>/.
#
# XXX: Don't just delete the OUTPUT/ directory as
# this, for a short period, changes the status of the
# test to never-run.
#
# XXX: During boot, swan-transmogrify runs "chcon -R
# testing/pluto". Of course this means that each time
# a test is added and/or a test is run (adding files
# under <test>/OUTPUT), the boot process (and
# consequently the time taken to run a test) keeps
# increasing.
#
# Mitigate this slightly by emptying <test>/OUTPUT
# before starting any test attempts. It's assumed
# that the previous test run was already captured
# above with save-directory.
if not args.dry_run:
try:
os.mkdir(test.output_directory)
except FileExistsError:
saved_output_directory = os.path.join(test.output_directory, str(attempt))
logger.info("emptying directory '%s'", test.output_directory)
for name in os.listdir(test.output_directory):
src = os.path.join(test.output_directory, name)
if attempt == 0:
logger.debug(" remove '%s'", src)
if os.path.isfile(src):
os.remove(src)
else:
shutil.rmtree(src)
elif os.path.isfile(src):
dst = os.path.join(saved_output_directory, name)
logger.debug(" move '%s' to '%s'", src, dst)
os.makedirs(saved_output_directory, exist_ok=True)
os.rename(src, dst)
# Start a debug log in the OUTPUT directory; include
# timing for this specific test attempt.
with logutil.TIMER, logutil.Debug(logger, os.path.join(test.output_directory, "debug.log")):
logger.info("****** test %s attempt %d of %d started at %s ******",
test.name, attempt+1, attempts, datetime.now())
ending = "undefined"
try:
if not args.dry_run:
runner.run_test(test, max_workers=args.workers)
ending = "finished"
result = post.mortem(test, args, update=(not args.dry_run))
if not args.dry_run:
# Store enough to fool the script
# pluto-testlist-scan.sh.
logger.info("storing result in '%s'", test.result_file)
with open(test.result_file, "w") as f:
f.write('"result": "%s"\n' % result)
except pexpect.TIMEOUT as e:
ending = "timeout"
logger.exception("**** test %s timed out ****", test.name)
result = post.mortem(test, args, update=(not args.dry_run))
# Since the OUTPUT directory exists, all paths to
# here should have a non-null RESULT.
stats.add("attempts(%s:%s)" % (ending, result), test)
logger.info("****** test %s %s ******", test.name, result)
if result.passed:
break
# Above will have set RESULT (don't reach here during
# cntrl-c or crash).
results.add(result)
stats.add("tests(%s)" % result, test)
except KeyboardInterrupt:
logger.exception("**** test %s interrupted ****", test.name)
return 1
finally:
logger.info("run finished at %s", datetime.now())
level = args.verbose and logutil.INFO or logutil.DEBUG
logger.log(level, "stat details:")
stats.log_details(logger, level=level, prefix=" ")
logger.info("result details:")
results.log_details(logger, level=logutil.INFO, prefix=" ")
logger.info("stat summary:")
stats.log_summary(logger, level=logutil.INFO, prefix=" ")
logger.info("result summary:")
results.log_summary(logger, level=logutil.INFO, prefix=" ")
return 0
def _process_test(domain_prefix, test, args, test_stats, result_stats, test_count, tests_count, boot_executor):
logger = logutil.getLogger(domain_prefix, __name__, test.name)
prefix = "******"
suffix = "******"
test_stats.add(test, "total")
test_runtime = test_boot_time = test_script_time = test_start_time = test_total_time = None
# Would the number of tests to be [re]run be better?
test_prefix = "%s (test %d of %d)" % (test.name, test_count, tests_count)
with logger.time("processing test %s", test_prefix) as test_total_time:
ignored, include_ignored, details = ignore.test(logger, args, test)
if ignored and not include_ignored:
result_stats.add_ignored(test, ignored)
test_stats.add(test, "ignored")
# No need to log all the ignored tests when an explicit
# sub-set of tests is being run. For instance, when running
# just one test.
if not args.test_name:
logger.info("$s %s ignored (%s) %s",
prefix, test_prefix, details, suffix)
return
# Be lazy with gathering the results, don't run the sanitizer or
# diff.
#
# XXX: There is a bug here where the only difference is white
# space. The test will show up as failed when it previously
# showed up as a white-space pass.
#
# The presence of the RESULT file is a proxy for detecting that
# the test was incomplete.
old_result = post.mortem(test, args, test_finished=None,
skip_diff=True, skip_sanitize=True)
if skip.result(logger, args, old_result):
logger.info("%s %s skipped (previously %s) %s",
prefix, test_prefix, old_result, suffix)
test_stats.add(test, "skipped")
result_stats.add_skipped(old_result)
return
if old_result:
test_stats.add(test, "tests", "retry")
logger.info("%s %s started (previously %s) ....",
prefix, test_prefix, old_result)
else:
test_stats.add(test, "tests", "try")
logger.info("%s %s started ....", prefix, test_prefix)
test_stats.add(test, "tests")
# Create the OUTPUT/ directory; if it already exists, move any
# contents to BACKUP/. Do it file-by-file so that, at no
# point, the OUTPUT/ directory missing (presence of OUTPUT/
# implies the test was started).
#
# By backing up each test just before it is started, a trail
# of what tests were attempted during each run is created.
#
# XXX:
#
# During boot, swan-transmogrify runs "chcon -R
# testing/pluto". Of course this means that each time a test
# is added and/or a test is run (adding files under
# <test>/OUTPUT), the boot process (and consequently the time
# taken to run a test) keeps increasing.
#
# By moving the directory contents to BACKUP/, which is not
# under testing/pluto/ this problem is avoided.
try:
os.mkdir(test.output_directory)
except FileExistsError:
backup_directory = os.path.join(args.backup_directory, test.name)
logger.info("moving contents of '%s' to '%s'",
test.output_directory, backup_directory)
# Even if OUTPUT/ is empty, copy it.
os.makedirs(backup_directory, exist_ok=True)
for name in os.listdir(test.output_directory):
src = os.path.join(test.output_directory, name)
dst = os.path.join(backup_directory, name)
logger.debug("moving '%s' to '%s'", src, dst)
os.replace(src, dst)
# Now that the OUTPUT directory is empty, start a debug log
# writing to that directory; include timing for this test run.
with logger.debug_time("testing %s", test_prefix,
logfile=os.path.join(test.output_directory,
"debug.log"),
loglevel=logutil.INFO) as test_runtime:
with logger.time("booting domains") as test_boot_time:
try:
test_domains = _boot_test_domains(logger, test, domain_prefix, boot_executor)
except pexpect.TIMEOUT:
logger.exception("timeout while booting domains", test.name)
# Bail before RESULT is written - being unable to
# boot the domains is a disaster.
return
# Run the scripts directly
with logger.time("running scripts %s",
" ".join(("%s:%s" % (host, script))
for host, script in test.host_script_tuples)) as test_script_time:
try:
# re-direct the test-result log file
for test_domain in test_domains.values():
output = os.path.join(test.output_directory,
test_domain.domain.host_name + ".console.verbose.txt")
test_domain.console.output(open(output, "w"))
for host, script in test.host_script_tuples:
if args.stop_at == script:
logger.error("stopping test run at (before executing) script %s", script)
break
test_domain = test_domains[host]
test_domain.read_file_run(script)
result = post.mortem(test, args, test_finished=True, update=True)
except pexpect.TIMEOUT as e:
logger.exception("**** timeout out while running script %s ****", script)
# Still peform post-mortem so that errors are
# captured, but force the result to
# incomplete.
result = post.mortem(test, args, test_finished=False, update=True)
finally:
# Close the redirected test-result log files
for test_domain in test_domains.values():
logfile = test_domain.console.output()
logfile.close()
# Always disconnect from the test domains.
logger.info("closing all test domains")
for test_domain in test_domains.values():
logfile = test_domain.console.output()
if logfile:
logfile.close()
test_domain.close()
# Above will have set RESULT. Exceptions such as control-c or
# a crash bypass this code.
logger.info("%s %s %s%s%s %s", prefix, test_prefix, result,
result.errors and " ", result.errors, suffix)
# Since the test finished, emit enough JSON to fool scripts like
# pluto-testlist-scan.sh.
#
# This also leaves a simple marker to indicate that the test
# finished.
#
# A more robust way of doing this would be to mark each of the
# console logs as complete as it is closed.
#
# More detailed information can be extracted from the debug.log.
hosts = {}
for host in sorted(test.host_names):
if host in result.errors:
hosts[host] = [error for error in result.errors[host]]
else:
hosts[host] = ["passed"]
RESULT = {
jsonutil.result.testname: test.name,
jsonutil.result.expect: test.expected_result,
jsonutil.result.result: str(result),
jsonutil.result.time: jsonutil.ftime(datetime.now()),
jsonutil.result.runtime: round(test_runtime.seconds(), 1),
jsonutil.result.boot_time: round(test_boot_time.seconds(), 1),
jsonutil.result.script_time: round(test_script_time.seconds(), 1),
jsonutil.result.total_time: round(test_total_time.seconds(), 1),
jsonutil.result.hosts: hosts,
}
j = jsonutil.dumps(RESULT)
logger.info("filling '%s' with json: %s", test.result_file(), j)
with open(test.result_file(), "w") as f:
f.write(j)
f.write("\n")
test_stats.add(test, "tests", str(result))
result_stats.add_result(result, old_result)
test_stats.log_summary(logger.info, header="updated test stats:", prefix=" ")
result_stats.log_summary(logger.info, header="updated test results:", prefix=" ")
def main():
parser = argparse.ArgumentParser(
description=
"list all tests in the form: <test> [ <directory> ] [ <result> <details...> ]",
epilog=
"By default this tool uses 'sanitizer.sh' and 'diff' to generate up-to-the-minuite test results (the previously generated files 'OUTPUT/*.console.txt' and 'OUTPUT/*.console.diff' are ignored). While this makes things a little slower, it has the benefit of always providing the most up-to-date and correct results (for instance, changes to known-good files are reflected immediately)."
)
parser.add_argument("--verbose", "-v", action="count", default=0)
parser.add_argument(
"--quick",
action="store_true",
help=
("Use the previously generated '.console.txt' and '.console.diff' files"
))
parser.add_argument(
"--quick-sanitize",
action="store_true",
help=("Use the previously generated '.console.txt' file"))
parser.add_argument(
"--quick-diff",
action="store_true",
help=("Use the previously generated '.console.diff' file"))
parser.add_argument(
"--update",
action="store_true",
help=("Update the '.console.txt' and '.console.diff' files"))
parser.add_argument("--update-sanitize",
action="store_true",
help=("Update the '.console.txt' file"))
parser.add_argument("--update-diff",
action="store_true",
help=("Update the '.console.diff' file"))
parser.add_argument("--print-directory", action="store_true")
parser.add_argument("--print-name", action="store_true")
parser.add_argument("--print-result", action="store_true")
parser.add_argument("--print-diff", action="store_true")
parser.add_argument("--print-args", action="store_true")
parser.add_argument("--list-ignored",
action="store_true",
help="include ignored tests in the list")
parser.add_argument("--list-untested",
action="store_true",
help="include untested tests in the list")
parser.add_argument(
"directories",
metavar="TEST-DIRECTORY",
nargs="+",
help=("Either a testsuite (only one) or test directory"))
# Note: this argument serves as documentation only. The
# TEST-DIRECTORY argument always consume all remaining parameters.
parser.add_argument("baseline",
metavar="BASELINE-DIRECTORY",
nargs="?",
help=("An optional testsuite directory containing"
" results from a previous test run"))
post.add_arguments(parser)
testsuite.add_arguments(parser)
logutil.add_arguments(parser)
args = parser.parse_args()
logutil.config(args)
logger = logutil.getLogger("kvmresults")
# The option -vvvvvvv is a short circuit for these; make
# re-ordering easy by using V as a counter.
v = 0
args.print_directory = args.print_directory or args.verbose > v
args.print_name = args.print_name or args.verbose > v
v += 1
args.list_untested = args.list_untested or args.verbose > v
v += 1
args.list_ignored = args.list_ignored or args.verbose > v
v += 1
v += 1
args.print_args = args.print_args or args.verbose > v
# By default print the relative directory path.
if not args.print_directory and not args.print_name:
args.print_directory = True
if args.print_args:
post.log_arguments(logger, args)
testsuite.log_arguments(logger, args)
logutil.log_arguments(logger, args)
return 1
# If there is more than one directory then the last might be the
# baseline. Try loading it as a testsuite (baselines are
# testsuites) to see if that is the case.
basetests = None
tests = None
if len(args.directories) > 1:
# Perhaps the last argument is the baseline? Suppress any
# nasty errors.
basetests = testsuite.load(logger,
args.directories[-1],
error_level=logutil.DEBUG)
if basetests:
logger.debug("basetests loaded from '%s'", basetests.directory)
args.directories.pop()
tests = testsuite.load_testsuite_or_tests(logger, args.directories)
logger.debug("basetests=%s", basetests)
logger.debug("tests=%s", tests)
# And check
if not tests:
logger.error("Invalid testsuite or test directories")
return 1
# When an explicit list of directories was specified always print
# all of them (otherwise, tests seem to get lost).
if isinstance(tests, list):
args.list_untested = True
# Preload the baseline. This avoids re-scanning the TESTLIST.
# Also, passing the full baseline to Test.results() lets that
# function differentiate between a baseline missing results or
# being entirely absent.
baseline = None
if basetests:
baseline = {}
for test in basetests:
baseline[test.name] = test
for test in tests:
# Produce separate runtimes for each test.
with logutil.TIMER:
logger.debug("start processing test %s", test.name)
# Filter out tests that are being ignored?
ignore = testsuite.ignore(test, args)
if ignore and not args.list_ignored:
continue
# Filter out tests that have not been run?
result = None
if not ignore:
result = post.mortem(
test,
args,
baseline=baseline,
output_directory=test.old_output_directory,
skip_sanitize=args.quick or args.quick_sanitize,
skip_diff=args.quick or args.quick_diff,
update=args.update,
update_sanitize=args.update_sanitize,
update_diff=args.update_diff)
if not result and not args.list_untested:
continue
sep = ""
if args.print_name:
print(sep, end="")
print(test.name, end="")
sep = " "
if args.print_directory:
print(sep, end="")
print(test.directory, end="")
sep = " "
if ignore:
print(sep, end="")
print("ignored", ignore, end="")
sep = " "
if result:
print(sep, end="")
print(result, end="")
sep = " "
print()
if args.print_diff and result:
for domain in result.diffs:
for line in result.diffs[domain]:
if line:
print(line)
sys.stdout.flush()
logger.debug("stop processing test %s", test.name)
return 0
def main():
parser = argparse.ArgumentParser(description="Run tests")
# This argument's behaviour is overloaded; the shorter word "try"
# is a python word.
parser.add_argument("--retry", type=int, metavar="COUNT", default=1,
help="which previously run tests should be retried: 0 selects not-started tests; 1 selects not-started+failed tests; -1 selects not-started+failed+passed tests (default is %(default)s)")
parser.add_argument("--attempts", type=int, default=1,
help="number of times to attempt a test before giving up; default %(default)s")
parser.add_argument("--dry-run", "-n", action="store_true")
parser.add_argument("--verbose", "-v", action="count", default=0)
# Default to BACKUP under the current directory. Name is
# arbitrary, chosen for its hopefully unique first letter
# (avoiding Makefile, OBJ, README, ... :-).
parser.add_argument("--backup-directory", metavar="DIRECTORY",
default=os.path.join("BACKUP", time.strftime("%Y%m%d%H%M%S", time.localtime())),
help="backup existing <test>/OUTPUT to %(metavar)s/<test> (default: %(default)s)")
parser.add_argument("directories", metavar="DIRECTORY", nargs="+",
help="either a testsuite directory or a list of test directories")
testsuite.add_arguments(parser)
runner.add_arguments(parser)
post.add_arguments(parser)
logutil.add_arguments(parser)
args = parser.parse_args()
logutil.config(args)
logger = logutil.getLogger("kvmrunner")
logger.info("Options:")
logger.info(" retry: %s", args.retry)
logger.info(" attempts: %s", args.attempts)
logger.info(" dry-run: %s", args.dry_run)
logger.info(" backup-directory: %s", args.backup_directory)
logger.info(" directories: %s", args.directories)
testsuite.log_arguments(logger, args)
runner.log_arguments(logger, args)
post.log_arguments(logger, args)
logutil.log_arguments(logger, args)
tests = testsuite.load_testsuite_or_tests(logger, args.directories, args,
log_level=logutil.INFO)
if not tests:
logger.error("test or testsuite directory invalid: %s", args.directories)
return 1
test_stats = stats.Tests()
result_stats = stats.Results()
start_time = datetime.now()
try:
logger.info("run started at %s", start_time)
test_count = 0
for test in tests:
test_stats.add("total", test)
test_count += 1
# Would the number of tests to be [re]run be better?
test_prefix = "****** %s (test %d of %d)" % (test.name, test_count, len(tests))
ignore = testsuite.ignore(test, args)
if ignore:
result_stats.add_ignore(test, ignore)
test_stats.add("ignored", test)
# No need to log all the ignored tests when an
# explicit sub-set of tests is being run. For
# instance, when running just one test.
if not args.test_name:
logger.info("%s: ignore (%s)", test_prefix, ignore)
continue
# Implement "--retry" as described above: if retry is -ve,
# the test is always run; if there's no result, the test
# is always run; skip passed tests; else things get a
# little wierd.
# Be lazy with gathering the results, don't run the
# sanitizer or diff.
old_result = post.mortem(test, args, skip_diff=True, skip_sanitize=True)
if args.retry >= 0:
if old_result:
if old_result.passed:
logger.info("%s: passed", test_prefix)
test_stats.add("skipped", test)
result_stats.add_skip(old_result)
continue
if args.retry == 0:
logger.info("%s: %s (delete '%s' to re-test)", test_prefix,
result, test.output_directory)
test_stats.add("skipped", test)
result_stats.add_skip(old_result)
continue
test_stats.add("retry", test)
logger.info("%s: starting ...", test_prefix)
test_stats.add("tests", test)
# Move the contents of the existing OUTPUT directory to
# BACKUP_DIRECTORY. Do it file-by-file so that, at no
# point, the directory is empty.
#
# By moving each test just before it is started a trail of
# what tests were attempted at each run is left.
#
# XXX: During boot, swan-transmogrify runs "chcon -R
# testing/pluto". Of course this means that each time a
# test is added and/or a test is run (adding files under
# <test>/OUTPUT), the boot process (and consequently the
# time taken to run a test) keeps increasing.
#
# Always moving the directory contents to the
# BACKUP_DIRECTORY mitigates this some.
saved_output_directory = None
if os.path.exists(test.output_directory):
saved_output_directory = os.path.join(args.backup_directory, test.name)
logger.info("moving contents of '%s' to '%s'",
test.output_directory, saved_output_directory)
# Copy "empty" OUTPUT directories too.
args.dry_run or os.makedirs(saved_output_directory, exist_ok=True)
for name in os.listdir(test.output_directory):
src = os.path.join(test.output_directory, name)
dst = os.path.join(saved_output_directory, name)
logger.debug("moving '%s' to '%s'", src, dst)
args.dry_run or os.replace(src, dst)
debugfile = None
result = None
# At least one iteration; above will have filtered out
# skips and ignores
for attempt in range(args.attempts):
test_stats.add("attempts", test)
# Create the OUTPUT directory.
try:
if not args.dry_run:
os.mkdir(test.output_directory)
elif os.exists(test.output_directory):
raise FileExistsError()
except FileExistsError:
# On first attempt, the OUTPUT directory will
# be empty (see above) so no need to save.
if attempt > 0:
saved_output_directory = os.path.join(test.output_directory, str(attempt))
logger.info("moving contents of '%s' to '%s'",
test.output_directory, saved_output_directory)
args.dry_run or os.makedirs(saved_output_directory, exist_ok=True)
for name in os.listdir(test.output_directory):
if os.path.isfile(src):
src = os.path.join(test.output_directory, name)
dst = os.path.join(saved_output_directory, name)
logger.debug("moving '%s' to '%s'", src, dst)
args.dry_run or os.replace(src, dst)
# Start a debug log in the OUTPUT directory; include
# timing for this specific test attempt.
with logutil.TIMER, logutil.Debug(logger, os.path.join(test.output_directory, "debug.log")):
logger.info("****** test %s attempt %d of %d started at %s ******",
test.name, attempt+1, args.attempts, datetime.now())
if saved_output_directory:
logger.info("contents of '%s' moved to '%s'",
test.output_directory, saved_output_directory)
saved_output_directory = None
ending = "undefined"
try:
if not args.dry_run:
runner.run_test(test, max_workers=args.workers)
ending = "finished"
result = post.mortem(test, args, update=(not args.dry_run))
if not args.dry_run:
# Store enough to fool the script
# pluto-testlist-scan.sh.
logger.info("storing result in '%s'", test.result_file)
with open(test.result_file, "w") as f:
f.write('"result": "%s"\n' % result)
except pexpect.TIMEOUT as e:
ending = "timeout"
logger.exception("**** test %s timed out ****", test.name)
result = post.mortem(test, args, update=(not args.dry_run))
# Since the OUTPUT directory exists, all paths to
# here should have a non-null RESULT.
test_stats.add("attempts(%s:%s)" % (ending, result), test)
if result.errors:
logger.info("****** test %s %s %s ******", test.name, result, result.errors)
else:
logger.info("****** test %s %s ******", test.name, result)
if result.passed:
break
# Above will have set RESULT. During a control-c or crash
# the below will not be executed.
test_stats.add("tests(%s)" % result, test)
result_stats.add_result(result, old_result)
test_stats.log_summary(logger.info, header="updated stats:",
prefix=" ")
result_stats.log_summary(logger.info, header="updated results:",
prefix=" ")
except KeyboardInterrupt:
logger.exception("**** test %s interrupted ****", test.name)
return 1
level = args.verbose and logger.info or logger.debug
test_stats.log_details(level, header="stat details:", prefix=" ")
result_stats.log_details(logger.info, header="result details:", prefix=" ")
test_stats.log_summary(logger.info, header="stat summary:", prefix=" ")
result_stats.log_summary(logger.info, header="result summary:", prefix=" ")
end_time = datetime.now()
logger.info("run finished at %s after %s", end_time, end_time - start_time)
return 0
def main():
parser = argparse.ArgumentParser(
description=
"list all tests in the form: <test> [ <directory> ] [ <result> <details...> ]",
epilog=
"By default this tool uses 'sanitizer.sh' and 'diff' to generate up-to-the-minuite test results (the previously generated files 'OUTPUT/*.console.txt' and 'OUTPUT/*.console.diff' are ignored). While this makes things a little slower, it has the benefit of always providing the most up-to-date and correct results (for instance, changes to known-good files are reflected immediately). If a BASELINE directory is specified, anywhere a test result is different to the baseline is also identified."
)
parser.add_argument("--verbose", "-v", action="count", default=0)
parser.add_argument(
"--quick",
action="store_true",
help=
("Use the previously generated '.console.txt' and '.console.diff' files"
))
parser.add_argument(
"--quick-sanitize",
action="store_true",
help=("Use the previously generated '.console.txt' file"))
parser.add_argument(
"--quick-diff",
action="store_true",
help=("Use the previously generated '.console.diff' file"))
parser.add_argument(
"--update",
action="store_true",
help=("Update the '.console.txt' and '.console.diff' files"))
parser.add_argument("--update-sanitize",
action="store_true",
help=("Update the '.console.txt' file"))
parser.add_argument("--update-diff",
action="store_true",
help=("Update the '.console.diff' file"))
parser.add_argument("--print-directory", action="store_true")
parser.add_argument("--print-name", action="store_true")
# parser.add_argument("--print-result", action="store_true")
parser.add_argument("--print-diff", action="store_true")
parser.add_argument("--print-args", action="store_true")
parser.add_argument("--print-output-directory", action="store_true")
parser.add_argument("--list-ignored",
action="store_true",
help="include ignored tests in the list")
parser.add_argument("--list-untested",
action="store_true",
help="include untested tests in the list")
parser.add_argument(
"directories",
metavar="TEST-DIRECTORY",
nargs="+",
help=("Either a testsuite (only one) or test directory"))
# Note: this argument serves as documentation only. The
# TEST-DIRECTORY argument always consume all remaining parameters.
parser.add_argument("baseline",
metavar="BASELINE-DIRECTORY",
nargs="?",
help=("An optional testsuite directory containing"
" results from a previous test run"))
post.add_arguments(parser)
testsuite.add_arguments(parser)
logutil.add_arguments(parser)
args = parser.parse_args()
logutil.config(args)
logger = logutil.getLogger("kvmresults")
# The option -vvvvvvv is a short circuit for these; make
# re-ordering easy by using V as a counter.
v = 0
args.print_directory = args.print_directory or args.verbose > v
args.print_name = args.print_name or args.verbose > v
v += 1
args.print_output_directory = args.print_output_directory or args.verbose > v
v += 1
args.list_untested = args.list_untested or args.verbose > v
v += 1
args.list_ignored = args.list_ignored or args.verbose > v
v += 1
v += 1
args.print_args = args.print_args or args.verbose > v
if args.print_args:
post.log_arguments(logger, args)
testsuite.log_arguments(logger, args)
logutil.log_arguments(logger, args)
return 1
# Is the last argument some sort of baseline? If it is, pre-load
# it.
#
# XXX: Should also support something like --baseline-testsuite and
# --baseline-output parameters.
baseline = None
if len(args.directories) > 1:
# If there is more than one directory then, perhaps, the last
# one is a baseline. A baseline might be: a complete
# testsuite snapshot; or just output saved as
# testing/pluto/OUTPUT/TESTDIR.
baseline = testsuite.load(logger,
args.directories[-1],
args,
error_level=logutil.DEBUG)
if baseline:
# discard the last argument as consumed above.
logger.debug("discarding baseline testsuite argument '%s'",
args.directories[-1])
args.directories.pop()
tests = testsuite.load_testsuite_or_tests(logger, args.directories, args)
# And check
if not tests:
logger.error("Invalid testsuite or test directories")
return 1
# When an explicit list of directories was specified always print
# all of them (otherwise, tests seem to get lost).
if isinstance(tests, list):
args.list_untested = True
for test in tests:
# Produce separate runtimes for each test.
with logutil.TIMER:
logger.debug("start processing test %s", test.name)
# Filter out tests that are being ignored?
ignore = testsuite.ignore(test, args)
if ignore and not args.list_ignored:
continue
# Filter out tests that have not been run?
result = None
if not ignore:
result = post.mortem(
test,
args,
baseline=baseline,
output_directory=test.saved_output_directory,
skip_sanitize=args.quick or args.quick_sanitize,
skip_diff=args.quick or args.quick_diff,
update=args.update,
update_sanitize=args.update_sanitize,
update_diff=args.update_diff)
if not result and not args.list_untested:
continue
sep = ""
# Print the test's name/path
if not args.print_directory and not args.print_name and not args.print_output_directory:
# By default: when the path given on the command line
# explicitly specifies a test's output directory
# (found in TEST.SAVED_OUTPUT_DIRECTORY), print that;
# otherwise print the path to the test's directory.
print(sep, end="")
print((test.saved_output_directory
and test.saved_output_directory or test.directory),
end="")
sep = " "
else:
# Print the test name/path per command line
if args.print_name:
print(sep, end="")
print(test.name, end="")
sep = " "
if args.print_directory:
print(sep, end="")
print(test.directory, end="")
sep = " "
if args.print_output_directory:
print(sep, end="")
print((test.saved_output_directory
and test.saved_output_directory
or test.output_directory),
end="")
sep = " "
if ignore:
print(sep, end="")
print("ignored", ignore, end="")
sep = " "
print(sep, end="")
if result.errors:
print(result, result.errors, end="")
else:
print(result, end="")
sep = " "
print()
if args.print_diff and result:
for domain in result.diffs:
for line in result.diffs[domain]:
if line:
print(line)
sys.stdout.flush()
logger.debug("stop processing test %s", test.name)
return 0
def main():
parser = argparse.ArgumentParser(description="Run tests")
# This argument's behaviour is overloaded; the shorter word "try"
# is a python word.
parser.add_argument("--retry", type=int, metavar="COUNT", default=1,
help="which previously run tests should be retried: 0 selects not-started tests; 1 selects not-started+failed tests; -1 selects not-started+failed+passed tests (default is %(default)s)")
parser.add_argument("--attempts", type=int, default=1,
help="number of times to attempt a test before giving up; default %(default)s")
parser.add_argument("--dry-run", "-n", action="store_true")
parser.add_argument("--verbose", "-v", action="count", default=0)
# Default to BACKUP under the current directory. Name is
# arbitrary, chosen for its hopefully unique first letter
# (avoiding Makefile, OBJ, README, ... :-).
parser.add_argument("--backup-directory", metavar="DIRECTORY", default="BACKUP",
help="backup existing <test>/OUTPUT to %(metavar)s/<date>/<test> (default: %(default)s)")
parser.add_argument("directories", metavar="DIRECTORY", nargs="+",
help="either a testsuite directory or a list of test directories")
testsuite.add_arguments(parser)
runner.add_arguments(parser)
post.add_arguments(parser)
logutil.add_arguments(parser)
args = parser.parse_args()
logutil.config(args)
logger = logutil.getLogger("kvmrunner")
logger.info("Options:")
logger.info(" retry: %s", args.retry)
logger.info(" attempts: %s", args.attempts)
logger.info(" dry-run: %s", args.dry_run)
logger.info(" backup-directory: %s", args.backup_directory)
logger.info(" directories: %s", args.directories)
testsuite.log_arguments(logger, args)
runner.log_arguments(logger, args)
post.log_arguments(logger, args)
logutil.log_arguments(logger, args)
tests = testsuite.load_testsuite_or_tests(logger, args.directories, args,
log_level=logutil.INFO)
if not tests:
logger.error("test or testsuite directory invalid: %s", args.directories)
return 1
test_stats = stats.Tests()
result_stats = stats.Results()
start_time = datetime.now()
exit_code = 0
try:
logger.info("run started at %s", start_time)
test_count = 0
for test in tests:
test_stats.add(test, "total")
test_count += 1
# Would the number of tests to be [re]run be better?
test_prefix = "****** %s (test %d of %d)" % (test.name, test_count, len(tests))
ignore, details = testsuite.ignore(test, args)
if ignore:
result_stats.add_ignored(test, ignore)
test_stats.add(test, "ignored")
# No need to log all the ignored tests when an
# explicit sub-set of tests is being run. For
# instance, when running just one test.
if not args.test_name:
logger.info("%s: ignore (%s)", test_prefix, details)
continue
# Implement "--retry" as described above: if retry is -ve,
# the test is always run; if there's no result, the test
# is always run; skip passed tests; else things get a
# little wierd.
# Be lazy with gathering the results, don't run the
# sanitizer or diff.
old_result = post.mortem(test, args, skip_diff=True, skip_sanitize=True)
if args.retry >= 0:
if old_result:
if old_result.passed:
logger.info("%s: passed", test_prefix)
test_stats.add(test, "skipped")
result_stats.add_skipped(old_result)
continue
if args.retry == 0:
logger.info("%s: %s (delete '%s' to re-test)", test_prefix,
result, test.output_directory)
test_stats.add(test, "skipped")
result_stats.add_skipped(old_result)
continue
test_stats.add(test, "retry")
logger.info("%s: starting ...", test_prefix)
test_stats.add(test, "tests")
# Move the contents of the existing OUTPUT directory to
# BACKUP_DIRECTORY. Do it file-by-file so that, at no
# point, the directory is empty.
#
# By moving each test just before it is started a trail of
# what tests were attempted at each run is left.
#
# XXX: During boot, swan-transmogrify runs "chcon -R
# testing/pluto". Of course this means that each time a
# test is added and/or a test is run (adding files under
# <test>/OUTPUT), the boot process (and consequently the
# time taken to run a test) keeps increasing.
#
# Always moving the directory contents to the
# BACKUP_DIRECTORY mitigates this some.
saved_output_directory = None
if os.path.exists(test.output_directory):
saved_output_directory = os.path.join(args.backup_directory,
start_time.strftime("%Y%m%d%H%M%S"),
test.name)
logger.info("moving contents of '%s' to '%s'",
test.output_directory, saved_output_directory)
# Copy "empty" OUTPUT directories too.
args.dry_run or os.makedirs(saved_output_directory, exist_ok=True)
for name in os.listdir(test.output_directory):
src = os.path.join(test.output_directory, name)
dst = os.path.join(saved_output_directory, name)
logger.debug("moving '%s' to '%s'", src, dst)
args.dry_run or os.replace(src, dst)
debugfile = None
result = None
# At least one iteration; above will have filtered out
# skips and ignores
for attempt in range(args.attempts):
test_stats.add(test, "attempts")
# Create the OUTPUT directory.
try:
if not args.dry_run:
os.mkdir(test.output_directory)
elif os.exists(test.output_directory):
raise FileExistsError()
except FileExistsError:
# On first attempt, the OUTPUT directory will
# be empty (see above) so no need to save.
if attempt > 0:
saved_output_directory = os.path.join(test.output_directory, str(attempt))
logger.info("moving contents of '%s' to '%s'",
test.output_directory, saved_output_directory)
args.dry_run or os.makedirs(saved_output_directory, exist_ok=True)
for name in os.listdir(test.output_directory):
if os.path.isfile(src):
src = os.path.join(test.output_directory, name)
dst = os.path.join(saved_output_directory, name)
logger.debug("moving '%s' to '%s'", src, dst)
args.dry_run or os.replace(src, dst)
# Start a debug log in the OUTPUT directory; include
# timing for this specific test attempt.
with logutil.TIMER, logutil.Debug(logger, os.path.join(test.output_directory, "debug.log")):
logger.info("****** test %s attempt %d of %d started at %s ******",
test.name, attempt+1, args.attempts, datetime.now())
if saved_output_directory:
logger.info("contents of '%s' moved to '%s'",
test.output_directory, saved_output_directory)
saved_output_directory = None
ending = "undefined"
try:
if not args.dry_run:
runner.run_test(test, args)
ending = "finished"
result = post.mortem(test, args, update=(not args.dry_run))
if not args.dry_run:
# Store enough to fool the script
# pluto-testlist-scan.sh.
logger.info("storing result in '%s'", test.result_file)
with open(test.result_file, "w") as f:
f.write('"result": "%s"\n' % result)
except pexpect.TIMEOUT as e:
logger.exception("**** test %s timed out ****", test.name)
ending = "timed-out"
# If the test has no output to check against, this will "pass"
result = post.mortem(test, args, update=(not args.dry_run))
# Since the OUTPUT directory exists, all paths to
# here should have a non-null RESULT.
test_stats.add(test, "attempts", ending, str(result))
if result.errors:
logger.info("****** test %s %s %s ******", test.name, result, result.errors)
else:
logger.info("****** test %s %s ******", test.name, result)
if result.passed:
break
# Above will have set RESULT. During a control-c or crash
# the below will not be executed.
test_stats.add(test, "tests", str(result))
result_stats.add_result(result, old_result)
test_stats.log_summary(logger.info, header="updated test stats:", prefix=" ")
result_stats.log_summary(logger.info, header="updated test results:", prefix=" ")
except KeyboardInterrupt:
logger.exception("**** test %s interrupted ****", test.name)
exit_code = 1
test_stats.log_details(args.verbose and logger.info or logger.debug,
header="final stat details:", prefix=" ")
result_stats.log_details(logger.info, header="final test details:", prefix=" ")
test_stats.log_summary(logger.info, header="final test stats:", prefix=" ")
result_stats.log_summary(logger.info, header="final test results:", prefix=" ")
end_time = datetime.now()
logger.info("run finished at %s after %s", end_time, end_time - start_time)
return exit_code
def results(logger, tests, baseline, args, result_stats):
for test in tests:
# Produce separate runtimes for each test.
with logutil.TIMER:
logger.debug("start processing test %s", test.name)
# Filter out tests that are being ignored?
ignore, details = testsuite.ignore(test, args)
if ignore:
result_stats.add_ignored(test, ignore)
if ignore and not args.list_ignored:
continue
# Filter out tests that have not been run
result = None
if not ignore and args.print_result:
result = post.mortem(test, args, baseline=baseline,
output_directory=test.saved_output_directory,
skip_sanitize=args.quick or args.quick_sanitize,
skip_diff=args.quick or args.quick_diff,
update=args.update,
update_sanitize=args.update_sanitize,
update_diff=args.update_diff)
if not result and not args.list_untested:
continue
if not result:
result_stats.add_ignored(test, str(result))
else:
result_stats.add_result(result)
sep = ""
# Print the test's name/path
if not args.prefix_directory and not args.prefix_name and not args.prefix_output_directory:
# By default: when the path given on the command line
# explicitly specifies a test's output directory
# (found in TEST.SAVED_OUTPUT_DIRECTORY), print that;
# otherwise print the path to the test's directory.
print(sep, end="")
print((test.saved_output_directory
and test.saved_output_directory
or test.directory), end="")
sep = " "
else:
# Print the test name/path per command line
if args.prefix_name:
print(sep, end="")
print(test.name, end="")
sep = " "
if args.prefix_directory:
print(sep, end="")
print(test.directory, end="")
sep = " "
if args.prefix_output_directory:
print(sep, end="")
print((test.saved_output_directory
and test.saved_output_directory
or test.output_directory), end="")
sep = " "
if ignore:
print(sep, end="")
print("ignored", ignore, end="")
sep = " "
if result:
print(sep, end="")
if result.errors:
print(result, result.errors, end="")
else:
print(result, end="")
sep = " "
if args.print_domains:
for name in test.domain_names():
print(sep, end="")
print(name, end="")
sep = " "
if args.print_initiators:
for name in test.initiator_names():
print(sep, end="")
print(name, end="")
sep = " "
if args.print_scripts:
for scripts in test.scripts():
for name, script in scripts.items():
print(sep, end="")
print(name + ":" + script, end="")
sep = ","
sep = " "
print()
if args.print_diff and result:
for domain in result.diffs:
for line in result.diffs[domain]:
if line:
print(line)
sys.stdout.flush()
logger.debug("stop processing test %s", test.name)
def _process_test(domain_prefix, test, args, test_stats, result_stats, test_count, tests_count, boot_executor):
logger = logutil.getLogger(domain_prefix, __name__, test.name)
suffix = "******"
test_stats.add(test, "total")
# Would the number of tests to be [re]run be better?
test_lapsed_time = timing.Lapsed()
test_prefix = "%s %s (test %d of %d)" % (suffix, test.name, test_count, tests_count)
ignored, include_ignored, details = ignore.test(logger, args, test)
if ignored and not include_ignored:
result_stats.add_ignored(test, ignored)
test_stats.add(test, "ignored")
# No need to log all the ignored tests when an explicit
# sub-set of tests is being run. For instance, when running
# just one test.
if not args.test_name:
logger.info("%s ignored (%s)", test_prefix, details)
return
# Be lazy with gathering the results, don't run the sanitizer or
# diff.
#
# XXX: There is a bug here where the only difference is white
# space. The test will show up as failed when it previousl showed
# up as a whitespace pass.
#
# The presence of the RESULT file is a proxy for detecting that
# the test was incomplete.
old_result = post.mortem(test, args, test_finished=None,
skip_diff=True, skip_sanitize=True)
if skip.result(logger, args, old_result):
logger.info("%s skipped (previously %s)", test_prefix, old_result)
test_stats.add(test, "skipped")
result_stats.add_skipped(old_result)
return
if old_result:
test_stats.add(test, "tests", "retry")
logger.info("%s started (previously %s) ....", test_prefix, old_result)
else:
test_stats.add(test, "tests", "try")
logger.info("%s started ....", test_prefix)
test_stats.add(test, "tests")
# Move the contents of the existing OUTPUT directory to
# BACKUP_DIRECTORY. Do it file-by-file so that, at no point, the
# directory is empty.
#
# By moving each test just before it is started a trail of what
# tests were attempted at each run is left.
#
# XXX: During boot, swan-transmogrify runs "chcon -R
# testing/pluto". Of course this means that each time a test is
# added and/or a test is run (adding files under <test>/OUTPUT),
# the boot process (and consequently the time taken to run a test)
# keeps increasing.
#
# Always moving the directory contents to the BACKUP_DIRECTORY
# mitigates this some.
backup_directory = None
if os.path.exists(test.output_directory):
backup_directory = os.path.join(args.backup_directory, test.name)
logger.info("moving contents of '%s' to '%s'",
test.output_directory, backup_directory)
# Copy "empty" OUTPUT directories too.
args.dry_run or os.makedirs(backup_directory, exist_ok=True)
for name in os.listdir(test.output_directory):
src = os.path.join(test.output_directory, name)
dst = os.path.join(backup_directory, name)
logger.debug("moving '%s' to '%s'", src, dst)
args.dry_run or os.replace(src, dst)
debugfile = None
result = None
# At least one iteration; above will have filtered out skips and
# ignored
for attempt in range(args.attempts):
test_stats.add(test, "attempts")
# Create the OUTPUT directory.
try:
if not args.dry_run:
os.mkdir(test.output_directory)
elif os.exists(test.output_directory):
raise FileExistsError()
except FileExistsError:
# On first attempt, the OUTPUT directory will be empty
# (see above) so no need to save.
if attempt > 0:
backup_directory = os.path.join(test.output_directory, str(attempt))
logger.info("moving contents of '%s' to '%s'",
test.output_directory, backup_directory)
args.dry_run or os.makedirs(backup_directory, exist_ok=True)
for name in os.listdir(test.output_directory):
if os.path.isfile(src):
src = os.path.join(test.output_directory, name)
dst = os.path.join(backup_directory, name)
logger.debug("moving '%s' to '%s'", src, dst)
args.dry_run or os.replace(src, dst)
# Start a debug log in the OUTPUT directory; include timing
# for this specific test attempt.
with logger.timer_stack(), logger.debug_stack(test.output_directory, "debug.log"):
attempt_lapsed_time = timing.Lapsed()
attempt_prefix = "%s (attempt %d of %d)" % (test_prefix, attempt+1, args.attempts)
logger.info("%s started ....", attempt_prefix)
if backup_directory:
logger.info("contents of '%s' moved to '%s'",
test.output_directory, backup_directory)
backup_directory = None
ending = "undefined"
try:
if not args.dry_run:
_run_test(domain_prefix, test, args, boot_executor)
ending = "finished"
result = post.mortem(test, args, test_finished=True,
update=(not args.dry_run))
if not args.dry_run:
# Store enough to fool the script
# pluto-testlist-scan.sh and leave a marker to
# indicate that the test finished.
logger.info("storing result in '%s'", test.result_file())
with open(test.result_file(), "w") as f:
f.write('"result": "%s"\n' % result)
except pexpect.TIMEOUT as e:
logger.exception("**** test %s timed out ****", test.name)
ending = "timed-out"
# Still peform post-mortem so that errors are
# captured, but force the result to incomplete.
result = post.mortem(test, args, test_finished=False,
update=(not args.dry_run))
# Since the OUTPUT directory exists, all paths to here
# should have a non-null RESULT.
test_stats.add(test, "attempts", ending, str(result))
logger.info("%s %s%s%s after %s %s", attempt_prefix, result,
result.errors and " ", result.errors,
attempt_lapsed_time, suffix)
if result.passed:
break
# Above will have set RESULT. During a control-c or crash the
# below will not be executed.
test_stats.add(test, "tests", str(result))
result_stats.add_result(result, old_result)
logger.info("%s %s%s%s after %s %s", test_prefix, result,
result.errors and " ", result.errors,
test_lapsed_time, suffix)
test_stats.log_summary(logger.info, header="updated test stats:", prefix=" ")
result_stats.log_summary(logger.info, header="updated test results:", prefix=" ")
def results(logger, tests, baseline, args, result_stats):
failures = 0
unresolved = 0
passed = 0
nr = 0
for test in tests:
nr = nr + 1
publish.json_status(logger, args,
"rebuilding %s (test %d of %d)" % (test.name, nr, len(tests)))
# If debug logging is enabled this will provide fine grained
# per-test timing.
with logger.debug_time("processing test %s", test.name):
# Filter out tests that are being ignored?
ignored, details = ignore.test(logger, args, test)
if ignored:
result_stats.add_ignored(test, ignored)
continue
# Filter out test results that are being skipped.
#
# XXX: In the default case (skip=[UNTESTED]) this should
# be cheap (does OUTPUT/ exist?). It isn't, instead a
# full post-mortem analysis is performed.
#
# This is noticeable when printing static test value such
# as the test's name takes far longer than one would
# expect.
result = post.mortem(test, args,
baseline=baseline,
output_directory=test.saved_output_directory,
quick=args.quick)
if args.update:
result.save()
if args.skip:
if printer.Print.RESULT in args.print \
and skip.result(logger, args, result):
result_stats.add_skipped(result)
continue
result_stats.add_result(result)
if result.resolution in [post.Resolution.PASSED,
post.Resolution.UNTESTED,
post.Resolution.UNSUPPORTED]:
passed = passed + 1
elif result.resolution in [post.Resolution.UNRESOLVED]:
unresolved = unresolved + 1
else:
failures = failures + 1
publish.test_files(logger, args, result)
publish.test_output_files(logger, args, result)
publish.json_result(logger, args, result)
if baseline and test in baseline \
and not result.issues.crashed():
# Since there is a baseline and the test didn't crash
# limit what is printed to just those where the
# baseline's result is different.
#
# Note that, this skips baseline-different - where the
# baseline failed for a different reason.
if {post.Issues.BASELINE_FAILED, post.Issues.BASELINE_PASSED}.isdisjoint(result.issues):
continue
b = args.json and printer.JsonBuilder(sys.stdout) or printer.TextBuilder(sys.stdout)
printer.build_result(logger, result, baseline, args, args.print, b)
publish.json_results(logger, args)
publish.json_summary(logger, args)
publish.json_status(logger, args, "finished")
# exit code
if args.exit_ok:
return 0
elif unresolved:
return 125 # 'git bisect' magic for don't know
elif failures:
return 1
else:
return 0
def _process_test(domain_prefix, test, args, test_stats, result_stats,
test_count, tests_count, boot_executor):
logger = logutil.getLogger(domain_prefix, __name__, test.name)
prefix = "******"
suffix = "******"
test_stats.add(test, "total")
test_runtime = test_boot_time = test_script_time = test_post_time = None
old_result = None
backup_directory = os.path.join(args.backup_directory, test.name)
# Would the number of tests to be [re]run be better?
test_prefix = "%s (test %d of %d)" % (test.name, test_count, tests_count)
publish.json_status(logger, args, "processing %s" % test_prefix)
with logger.time("processing test %s", test_prefix):
# Ignoring the test completely?
#
# So that there's no possible confusion over the test being
# run; remove any pre-existing output.
ignored, details = ignore.test(logger, args, test)
if ignored:
# The isdir() test followed by a simple move, while
# racy, should be good enough.
if os.path.isdir(test.output_directory):
logger.info("moving '%s' to '%s'", test.output_directory,
backup_directory)
os.makedirs(os.path.dirname(backup_directory), exist_ok=True)
os.rename(test.output_directory, backup_directory)
result_stats.add_ignored(test, ignored)
test_stats.add(test, "ignored")
logger.info("%s %s ignored (%s) %s", prefix, test_prefix, details,
suffix)
return
# Skip the test, leaving old results?
#
# For instance, during a test re-run, skip any tests that are
# passing.
#
# The check below compares the test and expected output,
# ignoring any previous test result. This way the results are
# consistent with kvmresults.py which always reflects the
# current sources.
#
# - modifying the expected output so that it no longer matches
# the last result is a fail
#
# - modifying the expected output so that it matches the last
# result is a pass
old_result = post.mortem(test,
args,
domain_prefix=domain_prefix,
quick=False)
if skip.result(logger, args, old_result):
logger.info("%s %s skipped (previously %s) %s", prefix,
test_prefix, old_result, suffix)
test_stats.add(test, "skipped")
result_stats.add_skipped(old_result)
publish.everything(logger, args, old_result)
return
# Running the test ...
#
# From now on the test will be run so need to perform post
# mortem.
try:
if old_result:
test_stats.add(test, "tests", "retry")
logger.info("%s %s started (previously %s) ....", prefix,
test_prefix, old_result)
else:
test_stats.add(test, "tests", "try")
logger.info("%s %s started ....", prefix, test_prefix)
test_stats.add(test, "tests")
# Create just the OUTPUT/ directory.
#
# If the directory already exists, copy the contents
# BACKUP/. Do it file-by-file so that, at no point, the
# OUTPUT/ directory is missing (having an OUTPUT/
# directory implies the test was started).
#
# Don't try to create the path. If the parent directory
# is missing, this and the entire script will crash.
# Someone did something nasty like deleted the parent
# directory.
#
# By backing up each test just before it is started,
# leaves a trail of what tests were attempted during a
# test run.
#
# XXX:
#
# During boot, swan-transmogrify runs "chcon -R
# testing/pluto". Of course this means that each time a
# test is added and/or a test is run (adding files under
# <test>/OUTPUT), the boot process (and consequently the
# time taken to run a test) keeps increasing.
#
# By moving the directory contents to BACKUP/, which is
# not under testing/pluto/ this problem is avoided.
try:
os.mkdir(test.output_directory)
except FileExistsError:
logger.info("moving contents of '%s' to '%s'",
test.output_directory, backup_directory)
# Even if OUTPUT/ is empty, move it.
os.makedirs(backup_directory, exist_ok=True)
for name in os.listdir(test.output_directory):
src = os.path.join(test.output_directory, name)
dst = os.path.join(backup_directory, name)
logger.debug("moving '%s' to '%s'", src, dst)
os.replace(src, dst)
# Now that the OUTPUT directory is empty, start a debug
# log writing to that directory; include timing for this
# test run.
with logger.debug_time("testing %s",
test_prefix,
logfile=os.path.join(
test.output_directory, "debug.log"),
loglevel=logutil.INFO) as test_runtime:
# boot the domains
with logger.time("booting domains") as test_boot_time:
try:
test_domains = _boot_test_domains(
logger, test, domain_prefix, boot_executor)
except pexpect.TIMEOUT:
# Bail. Being unable to boot the domains is a
# disaster. The test is UNRESOLVED.
logger.exception("TIMEOUT while booting domains")
return
except pexpect.EOF:
# Bail. Being unable to attach to the domains
# is a disaster. The test is UNRESOLVED.
logger.exception("EOF while booting domains")
return
except:
logger.exception("EXCEPTION while booting domains")
raise
# Run the scripts directly
with logger.time("running scripts %s",
test.host_scripts) as test_script_time:
with tcpdump.Dump(
logger,
domain_prefix,
test.output_directory, [
test_domain.domain
for test_domain in test_domains.values()
],
enable=args.tcpdump):
try:
# re-direct the test-result log file
for test_domain in test_domains.values():
output = os.path.join(
test.output_directory,
test_domain.domain.host_name +
".console.verbose.txt")
test_domain.console.redirect_output(
open(output, "w"))
# If a script times out, don't try to run
# post-mortem.sh.
host_timed_out = None
for script in test.host_scripts:
test_domain = test_domains[script.host_name]
try:
test_domain.read_file_run(script.path)
except pexpect.TIMEOUT as e:
# A timeout while running a test
# script is a sign that a command
# hung.
message = "%s while running script %s" % (
post.Issues.TIMEOUT, script)
logger.warning("*** %s ***" % message)
test_domain.console.append_output(
"%s %s %s", post.LHS, message,
post.RHS)
host_timed_out = script.host_name
break
except pexpect.EOF as e:
# An EOF while a script is running
# is a sign that libvirt crashed.
message = "%s while running script %s" % (
post.Issues.EOF, script)
logger.exception("*** %s ***" % message)
test_domain.console.append_output(
"%s %s %s", post.LHS, message,
post.RHS)
host_timed_out = script.host_name
break
except BaseException as e:
# if there is an exception, write
# it to the console
message = "%s %s while running script %s" % (
post.Issues.EXCEPTION, str(e), script)
logger.exception("*** %s ***" % message)
test_domain.console.append_output(
"\n%s %s %s\n", post.LHS, message,
post.RHS)
raise
if args.run_post_mortem is False:
logger.warning(
"+++ skipping script post-mortem.sh -- disabled +++"
)
elif host_timed_out:
logger.warning(
"+++ skipping script post-mortem.sh -- %s timed out +++"
% (host_timed_out))
else: # None or True
script = "../bin/post-mortem.sh"
for host_name in test.host_names:
test_domain = test_domains[host_name]
test_domain.console.append_output(
"%s post-mortem %s", post.LHS,
post.LHS)
logger.info("running %s on %s", script,
host_name)
try:
status = test_domain.console.run(
script)
if status:
logger.error(
"%s failed on %s with status %s",
script, host_name, status)
else:
test_domain.console.append_output(
"%s post-mortem %s", post.RHS,
post.RHS)
except pexpect.TIMEOUT as e:
# A post-mortem ending with a
# TIMEOUT gets treated as a
# FAIL.
message = "%s while running script %s" % (
post.Issues.TIMEOUT, script)
logger.warning("*** %s ***" % message)
test_domain.console.append_output(
"%s %s %s", post.LHS, message,
post.RHS)
continue # always teardown
except pexpect.EOF as e:
# A post-mortem ending with an
# EOF gets treated as
# unresloved.
message = "%s while running script %s" % (
post.Issues.EOF, script)
logger.exception("*** %s ***" %
message)
test_domain.console.append_output(
"%s %s %s", post.LHS, message,
post.RHS)
continue # always teardown
except BaseException as e:
# if there is an exception, write
# it to the console
message = "%s %s while running script %s" % (
post.Issues.EXCEPTION, str(e),
script)
logger.exception(message)
test_domain.console.append_output(
"\n%s %s %s\n", post.LHS, message,
post.RHS)
raise
for test_domain in test_domains.values():
test_domain.console.append_output(post.DONE)
finally:
# Close the redirected test-result log files
logger.info(
"closing all the test domain log files")
for test_domain in test_domains.values():
test_domain.console.close_output()
# Always disconnect from the test domains.
logger.info("closing all the test domains")
for test_domain in test_domains.values():
test_domain.close()
finally:
with logger.time("post-mortem %s", test_prefix):
# The test finished; it is assumed that post.mortem
# can deal with a crashed test.
result = post.mortem(test, args, domain_prefix=domain_prefix)
logger.info("%s %s %s%s%s %s", prefix, test_prefix, result,
result.issues and " ", result.issues, suffix)
result.save()
# If the test was run (a fresh run would delete RESULT)
# and finished (resolved in POSIX terminology), emit
# enough JSON to fool scripts like pluto-testlist-scan.sh.
#
# A test that timed-out or crashed, isn't considered
# resolved so the file isn't created.
#
# XXX: this should go away.
result_file = os.path.join(test.output_directory, "RESULT")
if not os.path.isfile(result_file) \
and result.resolution.isresolved():
RESULT = {
jsonutil.result.testname:
test.name,
jsonutil.result.expect:
test.status,
jsonutil.result.result:
result,
jsonutil.result.issues:
result.issues,
jsonutil.result.hosts:
test.host_names,
jsonutil.result.time:
jsonutil.ftime(test_runtime.start),
jsonutil.result.runtime:
round(test_runtime.seconds(), 1),
jsonutil.result.boot_time:
round(test_boot_time.seconds(), 1),
jsonutil.result.script_time:
round(test_script_time.seconds(), 1),
}
j = jsonutil.dumps(RESULT)
logger.debug("filling '%s' with json: %s", result_file, j)
with open(result_file, "w") as f:
f.write(j)
f.write("\n")
# Do this after RESULT is created so it too is published.
publish.everything(logger, args, result)
publish.json_status(logger, args, "finished %s" % test_prefix)
test_stats.add(test, "tests", str(result))
result_stats.add_result(result, old_result)
# test_stats.log_summary(logger.info, header="updated test stats:", prefix=" ")
result_stats.log_summary(logger.info,
header="updated test results:",
prefix=" ")
def main():
parser = argparse.ArgumentParser(description="Run tests")
# This argument's behaviour is overloaded; the shorter word "try"
# is a python word.
parser.add_argument("--retry", type=int, metavar="COUNT",
help=("number of times a test should be attempted before giving up"
" (tests are categorised as not-started (no OUTPUT directory), incomplete, failed, passed)"
"; a negative %(metavar)s selects all tests"
"; a zero %(metavar)s selects not-started tests"
"; a positive %(metavar)s selects not-started, incomplete and failing tests"
"; default is to select not-started tests"))
parser.add_argument("--dry-run", "-n", action="store_true")
parser.add_argument("--verbose", "-v", action="count", default=0)
parser.add_argument("directories", metavar="DIRECTORY", nargs="+",
help=("Either a testsuite directory or"
" a list of test directories"))
testsuite.add_arguments(parser)
runner.add_arguments(parser)
post.add_arguments(parser)
logutil.add_arguments(parser)
args = parser.parse_args()
logutil.config(args)
logger = logutil.getLogger("kvmrunner")
logger.info("Options:")
logger.info(" retry: %s", args.retry or "0 (default)")
logger.info(" dry-run: %s", args.dry_run)
logger.info(" directories: %s", args.directories)
testsuite.log_arguments(logger, args)
runner.log_arguments(logger, args)
post.log_arguments(logger, args)
logutil.log_arguments(logger, args)
tests = testsuite.load_testsuite_or_tests(logger, args.directories,
log_level=logutil.INFO)
if not tests:
logger.error("test or testsuite directory invalid: %s", args.directory)
return 1
# A list of test directories was specified (i.e, not a testsuite),
# then force the tests to run.
if isinstance(tests, list) and args.retry is None:
args.retry = 1;
logger.info("Explicit directory list; forcing --retry=%d (retry failed tests)", args.retry)
# Use a default dict so no need to worry about initializing values
# to zero.
stats = Stats()
results = Results()
start_time = time.localtime()
try:
logger.info("run started at %s", datetime.now())
for test in tests:
stats.add("total", test)
ignore = testsuite.ignore(test, args)
if ignore:
stats.add("ignored", test)
# No need to log all the ignored tests when an
# explicit sub-set of tests is being run. For
# instance, when running just one test.
if not args.test_name:
logger.info("*** %s: ignore (%s)", test.name, ignore)
continue
# Implement "--retry" as described above: if retry is -ve,
# the test is always run; if there's no result, the test
# is always run; skip passed tests; else things get a
# little wierd.
retry = args.retry or 0
if retry >= 0:
result = post.mortem(test, args)
if result:
if result.passed:
logger.info("*** %s: passed", test.name)
stats.add("skipped", test)
results.add(result)
continue
if retry == 0:
logger.info("*** %s: %s (delete '%s' to re-test)", test.name,
result.value, test.output_directory)
stats.add("skipped", test)
results.add(result)
continue
stats.add("tests", test)
debugfile = None
result = None
# At least one iteration; above will have filtered out
# skips and ignores
runs = max(abs(retry), 1)
for run in range(runs):
stats.add("runs", test)
# Create an output directory. If there's already an
# existing OUTPUT directory rename it to OUTPUT...
# Need to do this before the OUTPUT/debug.log is
# started as otherwise it too would get moved away.
saved_output_directory = None
if not args.dry_run:
try:
os.mkdir(test.output_directory)
except FileExistsError:
stats.add("reruns", test)
# Include the time this test run started in
# the suffix - that way all saved results can
# be matched using a wild card. Include the
# time the directory was last modified in the
# suffix - it makes a good approximation as to
# when the previous test run finished.
stat = os.stat(test.output_directory)
mtime = time.localtime(os.stat(test.output_directory).st_mtime)
saved_output_directory = (test.output_directory
+ time.strftime(".%Y%m%d%H%M", start_time)
+ time.strftime(".%H%M%S", mtime))
logger.debug("renaming '%s' to '%s'",
test.output_directory, saved_output_directory)
os.rename(test.output_directory, saved_output_directory)
# if the second attempt fails, let it crash
os.mkdir(test.output_directory)
# Start a debug log in the OUTPUT directory; include
# timing for this specific test run.
with logutil.TIMER, logutil.Debug(logger, os.path.join(test.output_directory, "debug.log")):
logger.info("****** test %s attempt %d of %d started at %s ******",
test.name, run+1, runs, datetime.now())
# Add a log message about any saved output
# directory to the per-test-run debug log. It
# just looks better.
if saved_output_directory:
logger.info("existing OUTPUT saved in '%s'",
saved_output_directory)
ending = "undefined"
try:
if not args.dry_run:
runner.run_test(test, max_workers=args.workers)
ending = "finished"
result = post.mortem(test, args, update=(not args.dry_run))
if not args.dry_run:
# Store enough to fool the script
# pluto-testlist-scan.sh.
logger.info("storing result in '%s'", test.result_file)
with open(test.result_file, "w") as f:
f.write('"result": "')
f.write(result.value)
f.write('"')
f.write("\n")
except pexpect.TIMEOUT as e:
ending = "timeout"
logger.exception("**** test %s timed out ****", test.name)
result = post.mortem(test, args, update=(not args.dry_run))
# Since the OUTPUT directory exists, all paths to
# here should have a non-null RESULT.
stats.add("runs(%s:%s)" % (ending, result.value), test)
logger.info("****** test %s %s ******", test.name, result)
if result.passed:
break
# Above will have set RESULT (don't reach here during
# cntrl-c or crash).
results.add(result)
stats.add("tests(%s)" % result.value, test)
except KeyboardInterrupt:
logger.exception("**** test %s interrupted ****", test.name)
return 1
finally:
logger.info("run finished at %s", datetime.now())
level = args.verbose and logutil.INFO or logutil.DEBUG
logger.log(level, "stat details:")
stats.log_details(logger, level=level, prefix=" ")
logger.info("result details:")
results.log_details(logger, level=logutil.INFO, prefix=" ")
logger.info("stat summary:")
stats.log_summary(logger, level=logutil.INFO, prefix=" ")
logger.info("result summary:")
results.log_summary(logger, level=logutil.INFO, prefix=" ")
return 0
def main():
parser = argparse.ArgumentParser(description="Run tests")
# This argument's behaviour is overloaded; the shorter word "try"
# is a python word.
parser.add_argument(
"--retry",
type=int,
metavar="COUNT",
help=
("number of times a test should be attempted before giving up"
" (tests are categorised as not-started (no OUTPUT directory), incomplete, failed, passed)"
"; a negative %(metavar)s selects all tests"
"; a zero %(metavar)s selects not-started tests"
"; a positive %(metavar)s selects not-started, incomplete and failing tests"
"; default is to select not-started tests"))
parser.add_argument("--dry-run", "-n", action="store_true")
parser.add_argument("--verbose", "-v", action="count", default=0)
parser.add_argument("directories",
metavar="DIRECTORY",
nargs="*",
help=("Either a testsuite directory or"
" a list of test directories"))
testsuite.add_arguments(parser)
runner.add_arguments(parser)
post.add_arguments(parser)
logutil.add_arguments(parser)
args = parser.parse_args()
logutil.config(args)
logger = logutil.getLogger("kvmrunner")
logger.info("Options:")
logger.info(" retry: %s", args.retry or "0 (default)")
logger.info(" dry-run: %s", args.dry_run)
logger.info(" directories: %s", args.directories)
testsuite.log_arguments(logger, args)
runner.log_arguments(logger, args)
post.log_arguments(logger, args)
logutil.log_arguments(logger, args)
tests = testsuite.load_testsuite_or_tests(logger,
args.directories,
log_level=logutil.INFO)
if not tests:
logger.error("test or testsuite directory invalid: %s", args.directory)
return 1
# A list of test directories was specified (i.e, not a testsuite),
# then force the tests to run.
if isinstance(tests, list) and args.retry is None:
args.retry = 1
logger.info(
"Explicit directory list; forcing --retry=%d (retry failed tests)",
args.retry)
# Use a default dict so no need to worry about initializing values
# to zero.
stats = Stats()
results = Results()
start_time = time.localtime()
try:
logger.info("run started at %s", datetime.now())
for test in tests:
stats.add("total", test)
ignore = testsuite.ignore(test, args)
if ignore:
stats.add("ignored", test)
# No need to log all the ignored tests when an
# explicit sub-set of tests is being run. For
# instance, when running just one test.
if not args.test_name:
logger.info("*** %s: ignore (%s)", test.name, ignore)
continue
# Implement "--retry" as described above: if retry is -ve,
# the test is always run; if there's no result, the test
# is always run; skip passed tests; else things get a
# little wierd.
retry = args.retry or 0
if retry >= 0:
result = post.mortem(test, args)
if result:
if result.passed:
logger.info("*** %s: passed", test.name)
stats.add("skipped", test)
results.add(result)
continue
if retry == 0:
logger.info("*** %s: %s (delete '%s' to re-test)",
test.name, result.value,
test.output_directory)
stats.add("skipped", test)
results.add(result)
continue
stats.add("tests", test)
debugfile = None
result = None
# At least one iteration; above will have filtered out
# skips and ignores
runs = max(abs(retry), 1)
for run in range(runs):
stats.add("runs", test)
# Create an output directory. If there's already an
# existing OUTPUT directory rename it to OUTPUT...
# Need to do this before the OUTPUT/debug.log is
# started as otherwise it too would get moved away.
saved_output_directory = None
if not args.dry_run:
try:
os.mkdir(test.output_directory)
except FileExistsError:
stats.add("reruns", test)
# Include the time this test run started in
# the suffix - that way all saved results can
# be matched using a wild card. Include the
# time the directory was last modified in the
# suffix - it makes a good approximation as to
# when the previous test run finished.
stat = os.stat(test.output_directory)
mtime = time.localtime(
os.stat(test.output_directory).st_mtime)
saved_output_directory = (
test.output_directory +
time.strftime(".%Y%m%d%H%M", start_time) +
time.strftime(".%H%M%S", mtime))
logger.debug("renaming '%s' to '%s'",
test.output_directory,
saved_output_directory)
os.rename(test.output_directory,
saved_output_directory)
# if the second attempt fails, let it crash
os.mkdir(test.output_directory)
# Start a debug log in the OUTPUT directory; include
# timing for this specific test run.
with logutil.TIMER, logutil.Debug(
logger, os.path.join(test.output_directory,
"debug.log")):
logger.info(
"****** test %s attempt %d of %d started at %s ******",
test.name, run + 1, runs, datetime.now())
# Add a log message about any saved output
# directory to the per-test-run debug log. It
# just looks better.
if saved_output_directory:
logger.info("existing OUTPUT saved in '%s'",
saved_output_directory)
ending = "undefined"
try:
if not args.dry_run:
runner.run_test(test, max_workers=args.workers)
ending = "finished"
result = post.mortem(test,
args,
update=(not args.dry_run))
if not args.dry_run:
# Store enough to fool the script
# pluto-testlist-scan.sh.
logger.info("storing result in '%s'",
test.result_file)
with open(test.result_file, "w") as f:
f.write('"result": "')
f.write(result.value)
f.write('"')
f.write("\n")
except pexpect.TIMEOUT as e:
ending = "timeout"
logger.exception("**** test %s timed out ****",
test.name)
result = post.mortem(test,
args,
update=(not args.dry_run))
# Since the OUTPUT directory exists, all paths to
# here should have a non-null RESULT.
stats.add("runs(%s:%s)" % (ending, result.value), test)
logger.info("****** test %s %s ******", test.name, result)
if result.passed:
break
# Above will have set RESULT (don't reach here during
# cntrl-c or crash).
results.add(result)
stats.add("tests(%s)" % result.value, test)
except KeyboardInterrupt:
logger.exception("**** test %s interrupted ****", test.name)
return 1
finally:
logger.info("run finished at %s", datetime.now())
level = args.verbose and logutil.INFO or logutil.DEBUG
logger.log(level, "stat details:")
stats.log_details(logger, level=level, prefix=" ")
logger.info("result details:")
results.log_details(logger, level=logutil.INFO, prefix=" ")
logger.info("stat summary:")
stats.log_summary(logger, level=logutil.INFO, prefix=" ")
logger.info("result summary:")
results.log_summary(logger, level=logutil.INFO, prefix=" ")
return 0
def _process_test(domain_prefix, test, args, test_stats, result_stats, test_count, tests_count, boot_executor):
logger = logutil.getLogger(domain_prefix, __name__, test.name)
prefix = "******"
suffix = "******"
test_stats.add(test, "total")
test_runtime = test_boot_time = test_script_time = test_post_time = None
old_result = None
backup_directory = os.path.join(args.backup_directory, test.name)
# Would the number of tests to be [re]run be better?
test_prefix = "%s (test %d of %d)" % (test.name, test_count, tests_count)
publish.json_status(logger, args, "processing %s" % test_prefix)
with logger.time("processing test %s", test_prefix):
# Ignoring the test completely?
#
# So that there's no possible confusion over the test being
# run; remove any pre-existing output.
ignored, details = ignore.test(logger, args, test)
if ignored:
# The isdir() test followed by a simple move, while
# racy, should be good enough.
if os.path.isdir(test.output_directory):
logger.info("moving '%s' to '%s'", test.output_directory,
backup_directory)
os.makedirs(os.path.dirname(backup_directory), exist_ok=True)
os.rename(test.output_directory, backup_directory)
result_stats.add_ignored(test, ignored)
test_stats.add(test, "ignored")
logger.info("%s %s ignored (%s) %s",
prefix, test_prefix, details, suffix)
return
# Skip the test, leaving old results?
#
# For instance, during a test re-run, skip any tests that are
# passing.
#
# The check below compares the test and expected output,
# ignoring any previous test result. This way the results are
# consistent with kvmresults.py which always reflects the
# current sources.
#
# - modifying the expected output so that it no longer matches
# the last result is a fail
#
# - modifying the expected output so that it matches the last
# result is a pass
old_result = post.mortem(test, args, domain_prefix=domain_prefix, quick=False)
if skip.result(logger, args, old_result):
logger.info("%s %s skipped (previously %s) %s",
prefix, test_prefix, old_result, suffix)
test_stats.add(test, "skipped")
result_stats.add_skipped(old_result)
publish.everything(logger, args, old_result)
return
# Running the test ...
#
# From now on the test will be run so need to perform post
# mortem.
try:
if old_result:
test_stats.add(test, "tests", "retry")
logger.info("%s %s started (previously %s) ....",
prefix, test_prefix, old_result)
else:
test_stats.add(test, "tests", "try")
logger.info("%s %s started ....", prefix, test_prefix)
test_stats.add(test, "tests")
# Create just the OUTPUT/ directory.
#
# If the directory already exists, copy the contents
# BACKUP/. Do it file-by-file so that, at no point, the
# OUTPUT/ directory is missing (having an OUTPUT/
# directory implies the test was started).
#
# Don't try to create the path. If the parent directory
# is missing, this and the entire script will crash.
# Someone did something nasty like deleted the parent
# directory.
#
# By backing up each test just before it is started,
# leaves a trail of what tests were attempted during a
# test run.
#
# XXX:
#
# During boot, swan-transmogrify runs "chcon -R
# testing/pluto". Of course this means that each time a
# test is added and/or a test is run (adding files under
# <test>/OUTPUT), the boot process (and consequently the
# time taken to run a test) keeps increasing.
#
# By moving the directory contents to BACKUP/, which is
# not under testing/pluto/ this problem is avoided.
try:
os.mkdir(test.output_directory)
except FileExistsError:
logger.info("moving contents of '%s' to '%s'",
test.output_directory, backup_directory)
# Even if OUTPUT/ is empty, move it.
os.makedirs(backup_directory, exist_ok=True)
for name in os.listdir(test.output_directory):
src = os.path.join(test.output_directory, name)
dst = os.path.join(backup_directory, name)
logger.debug("moving '%s' to '%s'", src, dst)
os.replace(src, dst)
# Now that the OUTPUT directory is empty, start a debug
# log writing to that directory; include timing for this
# test run.
with logger.debug_time("testing %s", test_prefix,
logfile=os.path.join(test.output_directory,
"debug.log"),
loglevel=logutil.INFO) as test_runtime:
# boot the domains
with logger.time("booting domains") as test_boot_time:
try:
test_domains = _boot_test_domains(logger, test, domain_prefix, boot_executor)
except pexpect.TIMEOUT:
# Bail. Being unable to boot the domains is a
# disaster. The test is UNRESOLVED.
logger.exception("timeout while booting domains")
return
except pexpect.EOF:
# Bail. Being unable to attach to the domains
# is a disaster. The test is UNRESOLVED.
logger.exception("eof (disconnect) while booting domains")
return
# Run the scripts directly
with logger.time("running scripts %s",
" ".join(("%s:%s" % (host, script))
for host, script in test.host_script_tuples)) as test_script_time:
with tcpdump.Dump(logger, domain_prefix, test.output_directory,
[test_domain.domain for test_domain in test_domains.values()],
enable=args.tcpdump):
try:
# re-direct the test-result log file
for test_domain in test_domains.values():
output = os.path.join(test.output_directory,
test_domain.domain.host_name + ".console.verbose.txt")
test_domain.console.output(open(output, "w"))
for host, script in test.host_script_tuples:
if args.stop_at == script:
logger.error("stopping test run at (before executing) script %s", script)
break
test_domain = test_domains[host]
try:
test_domain.read_file_run(script)
except pexpect.TIMEOUT as e:
# A test ending with a timeout
# gets treated as a FAIL. A
# timeout while running a test
# script is a sign that a command
# hung.
post_timeout = "%s %s:%s" % (post.TIMEOUT, host, script)
logger.warning("*** %s ***" % post_timeout)
test_domain.console.child.logfile.write("%s %s %s" % (post.LHS, post_timeout, post.RHS))
break
except BaseException as e:
# if there is an exception, write
# it to the console
test_domain.console.child.logfile.write("\n%s %s %s:%s %rhs\n%s" % (post.LHS, post.EXCEPTION, host, script, post.RHS, str(e)))
raise
for test_domain in test_domains.values():
test_domain.console.child.logfile.write(post.DONE)
finally:
# Close the redirected test-result log files
logger.info("closing all the test domain log files")
for test_domain in test_domains.values():
outfile = test_domain.console.output()
outfile.close()
# Always disconnect from the test domains.
logger.info("closing all the test domains")
for test_domain in test_domains.values():
test_domain.close()
finally:
with logger.time("post-mortem %s", test_prefix):
# The test finished; it is assumed that post.mortem
# can deal with a crashed test.
result = post.mortem(test, args, domain_prefix=domain_prefix)
logger.info("%s %s %s%s%s %s", prefix, test_prefix, result,
result.issues and " ", result.issues, suffix)
result.save()
# If the test was run (a fresh run would delete RESULT)
# and finished (resolved in POSIX terminology), emit
# enough JSON to fool scripts like pluto-testlist-scan.sh.
#
# A test that timed-out or crashed, isn't considered
# resolved so the file isn't created.
#
# XXX: this should go away.
result_file = os.path.join(test.output_directory, "RESULT")
if not os.path.isfile(result_file) \
and result.resolution.isresolved():
RESULT = {
jsonutil.result.testname: test.name,
jsonutil.result.expect: test.status,
jsonutil.result.result: result,
jsonutil.result.issues: result.issues,
jsonutil.result.hosts: test.host_names,
jsonutil.result.time: jsonutil.ftime(test_runtime.start),
jsonutil.result.runtime: round(test_runtime.seconds(), 1),
jsonutil.result.boot_time: round(test_boot_time.seconds(), 1),
jsonutil.result.script_time: round(test_script_time.seconds(), 1),
}
j = jsonutil.dumps(RESULT)
logger.debug("filling '%s' with json: %s", result_file, j)
with open(result_file, "w") as f:
f.write(j)
f.write("\n")
# Do this after RESULT is created so it too is published.
publish.everything(logger, args, result)
publish.json_status(logger, args, "finished %s" % test_prefix)
test_stats.add(test, "tests", str(result))
result_stats.add_result(result, old_result)
# test_stats.log_summary(logger.info, header="updated test stats:", prefix=" ")
result_stats.log_summary(logger.info, header="updated test results:", prefix=" ")